BC TABLET COMPUTER DE13 USERS GUIDE Notice Copyright 2018, MilDef Crete Inc. All rights reserved. No part of this publication may be reproduced and modified without the written permission of MilDef Crete Inc. MilDef Crete Inc. reserves the right to make changes in the products or the product specifications without any prior notice. Customers are advised to contact MilDef Crete Inc. for updated product information. MilDef Crete Inc. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties for the correctness of this book, nor any license grant of MilDef Crete Inc.'s patents or intellectual properties. MilDef Crete Inc. assumes no liability for customer's loss or damage caused by using this document. Trademarks Trademark Acknowledgments Intel is a registered trademark of Intel Corp. All product and company names are trademarks or registered trademarks of their respective holders. I Radiation Exposure Statement RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID:IR5DE13 Regulatory Information/Disclaimers Installation and use of this computer must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. II FCC (Federal Communications Commission) regulatory compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important:
Changes or modifications to this product not authorized by MilDef could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. In order to maintain compliance with FCC regulations, compliant peripheral devices and shielded cables must be used with this equipment. III CE Declaration of Conformity It is confirmed to comply with the requirements set out in the Council Directive on the approximation of the laws of the member states relating to Electromagnetic Compatibility
(2004/108/EC), Low-voltage Directive the Amendment Directive
(93/68/EEC), and the procedures given in European Council Directive (99/5/EC and 2004/108/EC ). The equipment was passed, and the equipment test was performed according to the following European standards:
(2006/95/EC), EN 300 328 V1.8.1 (2012) EN 301 893 V1.7.1 (2012) EN 301 489-1 V1.9.2 (2011) EN 301 4893 V1.4.1 (2002) EN 301 489-17 V2.2.1 (2012) EN62311 2008 EN300440-1 V1.6.1 2010 EN300440-2 V1.4.1 2010 UL, T V AC Adapter (T V includes LVD EN60950) IV Power Conservation This tablet computer consumes less power compared to conventional consumer computers. The power consumption may be further reduced by properly configuring the Power Management Setup. It is recommended that the power saving features be enabled even when not running on battery power. Power Management features can conserve power without degrading system performance. Power Safety There are specific power requirements for your tablet computer:
Only use an approved AC adapter designed for this tablet computer. There is a 3-prong grounded plug for the AC adapter. The 3rd prong is an important mechanism for ensuring product safety. Please do not neglect the importance of this mechanism. If you are unable to access a compatible outlet, please hire a qualified electrician to install a compatible outlet for you. When unplugging the AC power cord, please make sure to disconnect the cord by pulling from the plug head instead of pulling from the wire to prevent wire damage. Make sure the power outlet and any other extension cord(s) you use can support the total current load of all the connected devices. Before cleaning the tablet computer, please make sure it is disconnected from any external power source. Warning Before any upgrade procedures, make sure the power is turned off, and all the cables are disconnected (including telephone lines). Also, it is advisable to remove your battery to prevent your tablet computer from accidentally turning on. V Battery Precautions Only use batteries designed for this tablet computer. Using incompatible battery types may cause explosion, leakage or damage to the computer. Do not remove the battery from the computer while the computer is powered on. Do not continuously use a battery that has been dropped, or that appears damaged
(e.g. bent or twisted) in any way. Even if the computer is able to continuously work with a damaged battery, the circuit damage may occur and possibly cause fire. Always use the charger designed for this computer to recharge the battery. Incorrect recharging may cause the battery to explode. Do not try to service a battery by yourself. For battery service or replacement, please contact your service representatives. Please dispose of damaged battery promptly and carefully. Explosion or leakage may occur, if the battery is exposed to fire, improperly handled or discarded. Notice:
For safety, charging will stop if the internal temperature of the battery is out of range(<0C;
>50C). Please note that charging could have stopped before the ambient temperature reaching these boundaries because the internal temperature of the battery does not equal to the ambient temperature. Battery Disposal & Caution The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its service life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. Danger of explosion may possibly occur, if the battery is incorrectly replaced. Replace only with the same or the equivalent battery recommended by the manufacturer. Discard the used battery according to the manufacturers instructions. VI Water Resistance DE13 has a rating of IP67 under IEC standard 60529 (maximum depth of 1 meters up to 30 minutes) and was tested under controlled laboratory conditions. Although it has excellent protection, please do not use it as a diving equipment. Splash, water, and dust resistance are not permanent conditions when using in extreme environments and resistance might decrease as a result of normal wear. Also, please do not disassemble any part of your device because it might damage the resistance of your device. Environmental Information, Material Safety & Recycling All materials used in the manufacturing of this equipment are recyclable or environmentally the product continuously friendly. Please recycle the packing materials in accordance with local regulations at the end of the product's service life. Notice:
The equipment may contain insignificant amount of hazardous substances for health and environment below control level. To avoid spreading such substances into the eco system and to minimize the pressure on the natural environment, you are encouraged to reuse or recycle most of the materials in a safe way after the products service life. For more information on collection, reuse and recycle of materials, please consult local or regional waste administrations for more information. You can also contact your dealer for more information on the environmental details of the equipment. The symbol of the crossed out wheeled bin indicates that the product
(electrical and electronic equipment) should not be placed in municipal waste. Please check local regulations for disposal of electronic products. VII TABLE OF CONTENTS CHAPTER 1 - GETTING STARTED .............................................................. 1 UNPACKING .................................................................................................................. 1 APPEARANCE OVERVIEW ............................................................................................... 2 CHAPTER2 - OPERATING INFORMATION ................................................. 6 START USING YOUR TABLET COMPUTER ......................................................................... 6 STOP USING YOUR TABLET COMPUTER .......................................................................... 7 INSTALLING OPERATING SYSTEM .................................................................................... 8 USING INDICATORS AND KEYPAD .................................................................................... 8 SETTING FUNCTION FOR BUTTONS A1~A3 .................................................................... 10 OPERATING WIRELESS DEVICES ................................................................................... 12 CHAPTER3- MANAGING POWER ............................................................. 17 AC ADAPTER .............................................................................................................. 17 BATTERY .................................................................................................................... 18 BATTERY RECALIBRATION ............................................................................................ 20 ACPI SUPPORT .......................................................................................................... 21 CHAPTER 4 - BIOS SETUP ........................................................................ 22 MAIN MENU ................................................................................................................ 22 ADVANCED MENU ........................................................................................................ 23 PCH-FW Configuration Sub-Menu...................................................................................... 24 Trusted Computing Sub-Menu ........................................................................................... 24 RF Device Control Configuration Sub-Menu ...................................................................... 25 AC In Boot Control Sub-Menu ............................................................................................ 25 USB CHARGE Control Sub-Menu ........................................................................................ 26 Battery Recalibration Sub-Menu ........................................................................................ 26 IT8760 Super IO Configuration Sub-Menu ......................................................................... 27 Network Stack Configuration Sub-Menu ........................................................................... 27 CSM Configuration Sub-Menu ........................................................................................... 28 CHIPSET MENU ........................................................................................................... 29 PCH-IO Configuration Sub-Menu ....................................................................................... 29 SECURITY MENU ......................................................................................................... 30 HDD Security Configuration Sub-Menu ............................................................................. 30 BOOT MENU ............................................................................................................... 32 SAVE & EXIT MENU ..................................................................................................... 32 CHAPTER 5 DRIVERS AND APPLICATIONS ......................................... 33 CHAPTER 6 SPECIFICATIONS ............................................................... 34 PLATFORM .................................................................................................................. 34 CPU .......................................................................................................................... 34 MEMORY .................................................................................................................... 34 TOUCH SCREEN .......................................................................................................... 34 STORAGE ................................................................................................................... 34 BUTTONS/FUNCTION KEYS ........................................................................................... 35 AUDIO ........................................................................................................................ 35 I/O PORTS .................................................................................................................. 35 CASE ......................................................................................................................... 36 DIMENSIONS AND WEIGHT ............................................................................................ 36 POWER ....................................................................................................................... 36 CERTIFICATION............................................................................................................ 37 OPERATING & STORAGE TEMPERATURE ........................................................................ 37 MATERIALS AND RECYCLING......................................................................................... 37 CHAPTER 7 OPTIONAL DEVICES ......................................................... 38 COMMUNICATION ......................................................................................................... 38 SECURITY ................................................................................................................... 38 MIL. FISCHER CONNECTOR .......................................................................................... 38 CHAPTER 8 MAINTENANCE AND SERVICE ......................................... 39 CLEANING ................................................................................................................... 39 TROUBLESHOOTING ..................................................................................................... 39 RMA SERVICE ............................................................................................................ 40 Getting Started Chapter 1 - Getting Started Unpacking The following components come with your computer. If anything is missing or damaged, please notify the dealer immediately. Tablet omputer unit AC Adapter Quick Guide Chapter One - 1 Getting Started 3 4 Appearance Overview Front 2 1 1. LED Indicators 2. Light Sensor 3. Touch Screen 4. Buttons FN Lock Volume Volume Up Down Windows Rotation Input Lock Power Button ESC F2 Enter Buttons Default Function FN Lock Mode User Settable Chapter One - 2 Rear Getting Started 2 1 1. Expansion ports 2. Battery slot cover
* Optional IP65 device has thumb screws on the battery slot cover Chapter One - 3 Left Right Getting Started Front Front 1 2 3 1. DC-In 12~32V 2. USB3.1 Type C 3. Optional Fischer I/O:
Choose 2 out of the 5 options listed as below:
USB 2.0 x1 GLAN x1 COM x 1 (RS232 x1/RS422 x 1) Audio (Headphone out/Mic-in Combo) x 1 Sealed Headset (Headphone out/Mic-in Combo) x1 Chapter One - 4 Top Front Getting Started 1 2 1. Optional invisible mode on/off 2. GPS Antenna 3. WLAN/BT Main Antenna 4. WWAN Main Antenna 3 4 Bottom Front 1 2 1. WLAN/BT Aux Antenna 2. WWAN Aux Antenna 3 3. Docklite connector (POGO connector, Ext. ANT Signals x 2) Chapter One - 5 Chapter2 - Operating Information Operating Information Start Using Your Tablet Computer Always turn on your tablet computer by using the power button. Press the power button about 2 seconds and the tablet will boot up. This is the standard operating procedure to start using your tablet computer. After turning on the power of your tablet computer, it will start with the Operating System (OS) installed. Boot Up When you turn on the power, your computer will start to load the OS into the system memory. This start-up procedure is called boot up. Power On Self-Test (POST) Each time your computer is turned on, the BIOS will automatically perform a self-test of CPU, memory, hardware devices, and so on. Chapter Two - 6 Stop Using Your Tablet Computer Each time when you finish working with your tablet computer, there are several ways to stop Operating Information your tablet computer from operating. Shut down Directly click Shut down from your OS to turn OFF the power of your computer. Before shutting down, please do remember to save unfinished works and close your applications to prevent your SSD from suffering possible data loss or damage. Shut down will turn OFF power of your computer. If you want to start your computer again, you need to turn it ON again by pressing the power button. Sleep Under Sleep mode, the system will temporarily save your work into the computers RAM. If you want to start your computer again, please press the power button to resume. Hibernate Under Hibernate mode, the system will save your work into SSD. If you want to start your computer again, you need to press and hold the power button (approx. 2 sec.) until the SSD indicator lights on. Force Shut Down In the event that your tablet computer hangs or stops responding, you can perform a force shut down by pressing and holding the power button for 4~5 seconds. Please note that any unsaved work or data will be lost this way. Chapter Two - 7 Installing Operating System Operating Information Your computer is designed to operate with Microsoft Windows 10 / 64-bit Operating System. Please connect your computer with an external USB-interface drive to start the OS installation. Note:
A USB hub may be required during installation to connect with an external USB-interface ODD, as the System USB port may not supply enough power. Please connect your USB hub with extra power supply to complete the installation. Using Indicators and Keypad Your tablet computer is designed with backlight buttons for easy and quick operations. Also, each LED indicator shows different meanings. The description of each LED indicator and button functions are provided for your operational reference. LED Indicators LED Indicator Description Power/ S3 Indicator:
Green/ Flashing Green SSD Indicator:
Green Charger/ Battery Low Indicator:
Orange/ Flashing Orange Chapter Two - 8 Fn Lock Key Fn lock Key is used to switch other buttons into 2nd layer function(Blue legends). Operating Information 1. Press the Input Lock key. 2. Fn Lock Indicator will light on (Green light). 3. Press the Fn Lock key again to cancel the function. Buttons Default Function FN Lock Mode FN Lock Volume Volume Up Down Windows Rotation Input Lock Power Button ESC F2 Enter Input Lock key To prevent from unexpected input by buttons and touch screen, you can press Input Lock key. When Input Lock function is on, the input from devices including buttons and touch screen will be locked. To cancel the input lock function, just press the Input Lock key again and the indicator will be turned off. 4. Press the Input Lock key. 5. Input Lock Indicator will light on (Green light). 6. Press the Input Lock key again to cancel the function. Chapter Two - 9 Operating Information Setting Function for Buttons A1~A3 Hotkey Manager is an app which could be used to quickly set up and change between multiple functions for A1, A2 and A3. Please follow these procedure to use it. 1. Operate the Hotkey Manager then a menu will show up. 2. Scroll down to select function for each key. 3. Click and the setting will be saved automatically. Chapter Two - 10 4. The blank could be filled with related parameter according to the selected function. E.g. Fill in the address to use the function Open URL in default browser. Operating Information Available Function Items List None Open/ Execute a selected file Open URL in default browser Change display output Brightness up Brightness down Volume up Volume down Volume mute Launch on-screen keyboard Launch Windows Mobility Center Launch File Explorer Launcher Device Power Manager Chapter Two - 11 Operating Wireless Devices For your ease of operations, you can turn on/off your wireless devices through the proprietary software application - Device Power Manager. Operating Information Note:
Depending on the configuration of your tablet computer, your Device Power Manager menu may appear differently from the screenshots provided in this section. When you adjust User Account Control (UAC), a security feature in Windows, the setting value of Device Power Manager will be affected. So, once there is any adjustment on UAC, please uninstall Device Power Manager and reinstall it again. Bluetooth (Option) The Bluetooth module provides your tablet computer with a short-range wireless communication protocol to connect with other compatible devices via the pre-installed embedded antenna. To activate your Bluetooth functions, please follow the instructions below. 1. Driver & Application Installation a. Install the Bluetooth driver first. Read from the Utility DVD and find the directory listed in the readme file to finish installation. b. Install the Device Power Manager application. Read from the Utility DVD and find the directory listed in the readme file to finish installation. Chapter Two - 12 2. Launch the Device Power Manager After launching the utility, please tap Bluetooth to enable the Bluetooth function (tap again to disable). Once the Bluetooth function starts up, the wireless LED indicator
(color blue) will turn on and the Bluetooth icon will show up in the operating system Operating Information accordingly. Tap Bluetooth to enable the Bluetooth function (tap again to disable). Once the Bluetooth function starts up, the wireless device LED indicator will turn on (color blue) and the Bluetooth icon will appear in the OS accordingly. Chapter Two - 13 Wireless LAN (Option) Wireless LAN is an optional wireless communication module for your tablet computer. An embedded antenna will be pre-installed in your tablet computer to access the internet wirelessly. To activate your Wireless LAN function, please follow the illustrations below:
Operating Information 1. Driver & Application Installation a. Install the Chipset Driver first. Read from the Utility DVD and find the directory listed in the readme file to finish installation. b. Then, install the Device Power Manager application. Read from the Utility DVD and find the directory listed in the readme file to finish installation. 2. Launch the Device Power Manager After launching the utility, please tap Wireless LAN for enabling the Wireless LAN function (tap again to disable). Tap Wireless LAN to enable the Wireless LAN function (tap again to disable). Once the Wireless LAN function starts up, the wireless device LED indicator will turn on
(color blue) and the Wireless LAN icon will appear in the OS accordingly. Chapter Two - 14 Operating Information GPS (Option) GPS is an optional module for your tablet computer. This GPS module supports both GPS and GLONASS systems. An embedded antenna is pre-installed in your tablet computer to support the functions of your GPS and GLONASS. 1. Driver & Application Installation a. Install the Device Power Manager application:
Read from the Utility DVD and find the directory listed in the readme file to finish installation. b. Install the GPS driver:
GPS (Driver): Read from the Utility DVD and find the directory listed in the readme file to finish installation. Tap GPS to enable the GPS function (tap again to disable). 2. Navigation & Mapping Software Installation Please install your 3rd party navigation and mapping software after installing your GPS driver. Refer to your navigation and mapping software manual for installation and procedures on application setup and access. Once the GPS function starts up, the wireless device LED indicator will turn on (color blue). Chapter Two - 15 Operating Information Note:
Wireless devices can be turned ON/OFF through BIOS. Once a device is turned off through BIOS, its button on the Device Power Manager will be colored in yellow and with a prohibition marker. For example, the following illustration shows that WLAN and GPS devices are disabled through BIOS. To turn on, please enter into BIOS and enable the functions. For more information on BIOS setting, please refer to RF Device Control Configuration Sub-Menu section. Chapter Two - 16 Managing Power Chapter3- Managing Power AC Adapter The AC adapter performs two functions:
-
-
It powers the computer from an external AC source. It charges the computer battery. The adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. The following are recommended when using the AC adapter:
- Use a properly grounded AC outlet.
- Use one AC outlet exclusively for the computer. Having other appliances on the same line may cause interference.
- Use a power strip with built-in surge protection. Connect the AC adapter:
- Plug the AC cord to the adapter.
- Plug the other end of the AC cord into the wall outlet. Make sure the green LED on the adapter turns on.
- Attach the DC plug into the power jack of the computer. AC Adapter Indicator The green LED indicates that AC power is ready. Chapter Three - 17 Managing Power Battery The computer will automatically switch to battery when the external power source (AC adapter or optional vehicle adapter) is disconnected. Battery Power Saving Tips The computer comes with an intelligent power-saving feature. You may extend the battery life by:
Setup power saving functions in Operating System Power Management options (e.g. Windows Power Options). Lower the intensity of the display by brightness control. Turn the computer into standby (by Sleep or Power button) when it is temporarily not in use. Shut down the computer when it will not be in use for longer period of time. Battery Low When the battery is nearly exhausted, the computer gives the following Battery Low warnings:
Windows battery low warning. The power LED flashes. Once the Battery Low warning occurs, please:
Save and close the files you are currently working on then shut down the computer. Plug in AC or vehicle adapter to recharge the battery. Charging the Battery Plug in the AC adapter to start the battery charging. If the battery is already full, the sense circuitry will stop high current charge within several minutes. Charge indicator turns ON when the battery is charging and turns OFF when the battery charging is completed. Chapter Three - 18 Managing Power Battery Level You may check battery status from Operating System. In Windows, you can click the power/battery icon to reveal the battery gauge window. The following is the illustration of Battery Gauge in Windows OS. Note:
Battery characteristic varies depending on factors such as ambient temperature, charging method, load current, aging, etc. For example, the chemicals of the battery are more inactive at low temperature, thus decreases the output power. The battery gauge should only be used as a reference. Please do not expect it to show the exact amount of the power remaining. There is no memory effect on Lithium Ion battery cells. However, discharge the battery to nearly empty every month will help calibrating the internal gauge. Chapter Three - 19 Managing Power Battery Recalibration Battery recalibration allows users to maintain the battery in a healthy condition. To perform battery recalibration, please follow the steps as below:
1. Update BIOS & EC to the latest version. 2. Insert the battery to the computer, and connect it to AC adapter. 3. Enter the BIOS => Choose Advanced menu => Choose Battery Recalibration =>
Press Enter. 4. When the Start Battery Recalibration pop-up appears, press Yes to continue. (Before you run the battery calibration, please make sure that the battery level must be LOWER than 95% ; otherwise, the calibration cannot work.) 5. The recalibration is now processing. You can see the following recalibration status on the screen:
- Calibration Frequency: How many times the calibration is processed
-
-
-
-
Battery Capacity: Current battery capacity Battery Charge Mode: Charge/Discharge Battery Learning Mode: Normal (charge)/Learn (discharge) 6. A pop-up appears when the calibration is completed. Then click OK. 7. Press Yes to reboot the computer when Reset Without Saving pop-up appears. Note:
Do not turn off the LCD and do not remove AC adapter during the calibration. One cycle of recalibration process indicates Charge to Full => Start Learn Mode
=> Discharge => Complete Learn Mode => Charge to Full. It will take approx. eight hours for a cycle. It requires five cycles to complete the battery recalibration. Then the recalibration will stop automatically. If you want to terminate the calibrating, simply shut down the computer by pressing Power Button or just press "CTRL+ALT+DEL" to restart. Chapter Three - 20 Managing Power ACPI Support Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. With ACPI and an ACPI-compliant operating system (such as Microsoft Windows), this feature will allow you to reduce the power consumption and conserve energy. By supporting ACPI, the AC adapter LED and the Power indicator LED will show in different ways. The followings are detailed descriptions of LED indicators and their meanings:
Sleep:
AC adapter LED is ON (while connecting with power) Power LED indicator is flashing Green; other LED indicators are OFF Hibernate:
AC adapter LED is ON (while connecting with power) Power LED indicator is OFF; other LED indicators are OFF Shut down:
AC adapter LED is ON (while connecting with power) Power LED indicator is OFF; other LED indicators are OFF Chapter Three - 21 Chapter 4 - BIOS Setup Optional Devices BIOS Setup Press [F2] at boot up to enter BIOS setup. Use arrow keys to select options and [+/-] to modify them. When finished, move to Exit and press [Enter] then confirm save by pressing [Y]. Main Menu Main Advanced Chipset Boot Security Save & Exit Aptio Setup Utility BIOS Information BIOS Vendor Core Version Compliancy Project Version Build Date and Time Access Level EC Version Processor Information Name Type Speed Microcode Revision Total Memory ME FW Version Serial ATA Port 1 System Date System Time Set the Date. Use Tab to switch between Date elements.
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Note:
The contents may vary depending on computer configurations. Incorrect settings may cause system malfunction. To correct it, restore the Optimized Defaults with F3. Chapter Four - 22 Advanced Menu Optional Devices BIOS Setup Main Advanced Chipset Boot Security Save & Exit Aptio Setup Utility PCH-FW Configuration Trusted Computing RF Device Control EC Thermal Control AC In boot Control USB CHARGE Control Battery Recalibration IT8760 Super IO Configuration Network Stack onfiguration CSM Configuration Configure Gigabit Ethernet device parameters
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Advanced Menu Selections You can make the following selections on the Advanced Menu. Feature Options Description PCH-FW Configuration Firmware update Configuration Configure Management Engine Technology Parameter Trusted Computing RF Device Control AC In Boot USB CHARGE Control Battery Recalibration Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Yes No IT8760 Super IO Configuration Serial Port configuration Network Stack Configuration CSM Configuration Parallel Port configuration Disabled Enabled Disabled Enabled TPM Support GSM, GPS, BLUETOOTH, WLAN AC In Boot Setting USB Charge Setting Start Battery recalibration function
*For Main Battery Only!
Enable / Disable Serial Port (COM) Change COM port Settings Enable / Disable Parallel Port Enable / Disable UEFI Network Stack Enable / Disable CSM support Chapter Four - 23 PCH-FW Configuration Sub-Menu Aptio Setup Utility Advanced ME FW Version ME Firmware Mode ME Firmware Type ME Firmware SKU Firmware Update Congiguration Trusted Computing Sub-Menu Aptio Setup Utility Advanced TPM20 Device Found Security Device Support Pending operation Optional Devices BIOS Setup Configure Management Engine Technology Parameters
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit support Enables or Disables BIOS for security device. O.S. will not show Security Device. EFI protocol and INT1A interface will not be available. TCG
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 24 RF Device Control Configuration Sub-Menu Advanced Aptio Setup Utility Optional Devices BIOS Setup RF Device Control GSM STATUS GSM GPS STATUS GPS BT STATUS BLUETOOTH WLAN STATUS WLAN Present
[Enabled]
Present
[Enabled]
Present
[Enabled]
Present
[Enabled]
RF Device Control Setting
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit AC In Boot Control Sub-Menu Advanced Aptio Setup Utility AC In Boot AC In Boot Control
[Disabled]
AC In Boot Setting Chapter Four - 25 Optional Devices BIOS Setup USB CHARGE Setting
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Start Battery recalibration function
*For Main Battery Only!
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit USB CHARGE Control Sub-Menu Advanced Aptio Setup Utility USB CHARGE USB CHARGE Control
[Disabled]
Battery Recalibration Sub-Menu Aptio Setup Utility Advanced Battery Recalibration Utility Calibration Frequency Battery Capacity Battery Charge Mode Battery Learning Mode Note: For Primary battery (left hand side) only, while the Utility is executing, please remove secondary battery (right hand side) and dont close the LCD and dont disconnect the AC adapter. The battery is first fully charged, dully discharged, and then it will be fully charged again to complete the battery recalibration process. About 8hrs is needed for the battery to completely the process. Chapter Four - 26 IT8760 Super IO Configuration Sub-Menu Aptio Setup Utility Optional Devices BIOS Setup Advanced IT8760 Super IO Configuration Super IO Chip IT8760 Serial Port 1 Configuration Serial Port 2 Configuration Network Stack Configuration Sub-Menu Advanced Aptio Setup Utility Network Stack
[Disabled]
Set Parameters of Serial Port
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Enable/Disable UEFI Network Stack
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 27 CSM Configuration Sub-Menu Aptio Setup Utility Advanced Compatibility Support Module Configuration CSM Support [Disabled]
Optional Devices BIOS Setup Enable/Disable CSM Support.
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 28 Chipset Menu Optional Devices BIOS Setup Main Advanced Chipset Boot Security Save & Exit Aptio Setup Utility PCH Parameters
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Enable or disable onboard NIC.
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit PCH-IO Configuration PCH-IO Configuration Sub-Menu Chipset Aptio Setup Utility Intel PCH RC Version Intel PCH SKU Name Intel PCH Rev ID PCH LAN Controller Wake on LAN 2.1.0.1 PCH-H Mobile QM170 31/D1
[Enabled]
[Enabled]
Chapter Four - 29 Security Menu Optional Devices BIOS Setup Main Advanced Chipset Boot Security Save & Exit Aptio Setup Utility Password Description If ONLY the Administrators password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the Users password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights. The password length must be in the following range;
Minimum length Maximum length Administrator Password User Password HDD Security Configuration:
P1: XXXXXXXXXXXX Secure Boot 3 20 Set Password Administrator
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit HDD Security Configuration Sub-Menu Security Aptio Setup Utility HDD Password Description:
Allows Access to Set, Modify and Clear Hard Disk User and Master Password. User Password need to be installed for Enabling Security. Master password can be Modified only when successfully unlocked with Master Password in POST. HDD PASSWORD CONFIGRATION:
Security Supported : Yes Security Enabled : No Security Locked : No Security Frozen : No HDD User Pwd Status NOT INSTALLED HDD Master Pwd Status INSTALLED Set User Password Set Master Password Set Password. HDD User to Power after Disk
***Advisable Cycle System setting Hard Passwords***
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 30 Optional Devices BIOS Setup Setting Password 1. Once you set HDD passwords successfully, you must enter user password to boot in the future. The master password provides an alternative entry in case the user password is lost. 2. Clearing the master password in BIOS setup will also clear the current user password. Master password is used as a backup key, its better not to be changed frequently. 3. You can set your master password and user password with a length between 1 and 32 characters. If you want to clear current password, type nothing when creating a new password. 4. After you set a password, Pwd Status will change from NOT INSTALLED to INSTALLED and the security enabled status will change to YES. 5. Your setting will take effect after reboot. Note:
If the master password is lost or it is not set earlier than the user password, the user password would make accessing impossible. So please set the master password at first and keep it carefully. losing Resetting Password 1. After typing an invalid user password three times, a message will show HDD is locked. Pressing Enter will leave the screen message. 2. Press F2 immediately to enter the BIOS setup where the lost users password could be cleared with the master password. 3. Once the HDD is locked, users have no right to access. You can only enter again by the correct user password or clear it by the master password. 4. A warm boot will cause HDD Security Frozen in the selection. Only a cold boot can lift the HDD Security frozen and allow further operations in the BIOS setup. (After a cold boot, users can try to enter again with the correct user password or just reset it with the master password) Chapter Four - 31 Optional Devices BIOS Setup Boot Menu Main Advanced Chipset Boot Security Save & Exit Aptio Setup Utility Boot Option Priorities Boot Option #1
[Windows Boot Manager
(P1: XXXXXXXX) ]
Set the system boot order.
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit The system will try to boot from device on top then the 2nd and so on. If there is more than one device in each category, only the device on top of sub-menu can boot up. Save & Exit Menu Main Advanced Chipset Boot Security Save & Exit Aptio Setup Utility Save Options Save Changes and Reset Discard Changes and Reset Default Options Restore Defaults Boot Override Windows Boot Manager (P1: XXXXXXXX) Launch EFI Shell from filesystem device Reset the system after saving the changes
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 32 Optional Devices Drivers and Applications Chapter 5 Drivers and Applications The Utility DVD includes all the drivers for the devices installed in your tablet computer. Please consult your dealer if there are any driver missing. Also, you could update the driver or check if there any driver need to be installed by "Windows device manager". Please check the readme.txt file on Utility DVD to get the information for driver installation Chapter Five - 33 Chapter 6 Specifications Specifications Platform Intel Kaby Lake-Y Platform CPU Intel 7th Generation Dual Core i7-7Y75 Processor (4M Cache, up to 3.60 GHz) Memory 16GB System Memory (On board)
-
-
Touch Screen Resolution:
Resistive Multi-Touch Screen Optional Invisible mode on/off Industrial grade LPDDR3 1066MHz Brightness (min.~ typ.): 640~800 nits 7 WXGA (16:10) 1280 x 800 pixels Type:
Note:
Invisible Mode On/Off controls all light sources on/off, including LCD B/L, LED Indicators & Keypad B/L. Invisible Mode trades-off with Fischer conn. x 1. Storage M.2 2280 M key SATAIII SSD 128GB/256GB/512GB Industrial Grade Chapter Six - 34 Power button (front side) Buttons/Function Keys Membrane Function Keys with LED Backlight Audio Specifications HD Audio and mono Speakers Embedded Digital Mic I/O Ports Right:
Jack I/O: Amphenol USB3.1 Type C x 1 Optional Fishcher I/O: Each function can only be chosen once. Choose 2 out of 6 options listed as below:
USB 2.0 x1 DP x 1 GLAN COM x 1 (RS232 x1/RS422 x 1) Audio (Headphone out/Mic-in Combo) x 1 Sealed Headset (Headphone out/Mic-in Combo) x1 Note:
Optional Fischer Audio and Sealed Headset cant coexist. Bottom:
Docklite Connector: 35-pin POGO (Hot Swappable) Ext. ANT Signals x2 Chapter Six - 35 Specifications Case CNC milled Aluminum Color: Black/ NATO Green Dimensions and Weight Dimensions (mm):
250 (L) x 14 (W) x 30.5 (H)(with Bumpers) Weight: 1.15kg (With battery) 0.97kg (Without battery) Note:
Weight varies depending on system configurations. Power Battery Pack:
Type:
Capacity:
Dimensions:
Weight:
AC Adapter Input Voltage:
Frequency:
Prismatic Lithium Ion Cell 7.2V/4400mAh (2S2P) 138 mm (W) x 136 mm (D) x 9.7 mm (H) Approx. 300 gram (0.66 lb.) AC 100 - 240V 50/60 Hz Output Voltage:
Maximum Power:
DC 19V 90 Watts Dimensions:
133 mm (W) x 58mm (D) x 30mm (H) Weight:
Approx. 400 g (0.88 lb.) DC-In:
12~32V 8A
- Fischer 3 pin Connector Chapter Six - 36 Certification Specifications CE, FCC, WEEE, REACH, RoHS, IP65, MIL-STD-810G, MIL-STD-461G, Optional GA Operating & Storage Temperature Standard: -20 C ~ +60 C Operating Temp.:
-
- Optional: -30 C ~ +60 C
*Battery Mode at least -10C Storage Temp.: -40 C ~ +70 C Materials and Recycling Materials of the computer are as follows:
Magnesium case: AL6061T6 PCB:
Battery:
Packing:
FR-4, UL 94V0 Rechargeable Lithium Ion cells Carton: Unbleached paper Cushion: Recyclable PE Carrying bag: Recyclable PE Fiber Quick Guide: Paper Please recycle the parts according to local regulations. Chapter Six - 37 Chapter 7 Optional Devices Optional Devices Communication WiFi/Bluetooth:
-
-
Intel Dual Band wireless- AC 8265 Board Form Factor: M.2 2230 E-key Card
- Wi-Fi Certified: 802.11 a/b/g/n/ac
-
-
Bluetooth: Supports BT 4.2 (Backward compatible) Interface: PCIe (WiFi)/USB (BT) GPS:
-
U-blox M8N (USB interface) Security BIOS password and Kensington cable lock slot are available to safely secure your computer. Optional TPM (Trusted Platform Module) version 2.0 is also supported, preventing unauthorized access to your computer. Mil. Fischer Connector Optional Fischer connectors provide solutions for users to operate the device in harsh environments. Signals designed for usage include USB2.0, DP, VGA, RS232 or RS422, GLAN, and Audio. Chapter Seven - 38 Chapter 8 Maintenance and Service Cleaning ALWAYS turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. An air gun is recommended for cleaning water and dust. For salty water please clean with fresh water then blow-dry with an air gun. Troubleshooting Should the tablet computer fail to function properly, the troubleshooting steps below may be followed. Power Problems:
When I turn on the Tablet computer, it does not respond.
-
-
If you are using battery power, check if the battery is charged If you are using AC power, ensure that the connection of AC adapter is correct. I cannot return from Hibernation while on battery power
-
The battery might be drained. Please plug the tablet into AC power.
- Hard reset the device by pressing the power button for 4 seconds Unexpected or improper shutdown causes BIOS to reset to Optimized Default
-
This could be a power problem. Please connect the AC power adapter to fix the abnormal shutdown problem. Minimize the configuration, i.e. remove extra peripherals and devices. Remove the modules one by one (SSD, Battery, etc.). Remove the software suspected. Set BIOS fail-safe default. Re-install operating system and application software. RMA Service If troubleshooting solutions are unsuccessful, consult your dealer for RMA. Shipping instructions:
1. Remove any personal add-on devices or other media. 2. Use the original shipping container and packing materials, if possible. 3. If the original packing materials are not available, wrap the equipment with soft material (e.g. PU/PE form) then put the wrapped equipment into a hard cardboard shipping box. 4. Include a sheet with the following information: (Note: Please keep a copy of this sheet for your records.)
-
-
-
-
-
-
Name Address Unit serial number Place and date of purchase or the original invoice number Date of failure A DETAILED description of the problems you have encountered including: The operating system, the add-on device installed (if any), the application software, the failure phenomenon, etc.
-
A list of the hardware/software configuration, if applicable. 5. Clearly mark the outside of the shipping box with the RMA #. If an RMA # is not present on the shipping box, receiving will be unable to identify it and it might be returned. 6. Unless prior arrangements have been made, the customer is responsible for all shipping costs. Unauthorized use of the companys shipping accounts is not permitted.