TABLET COMPUTER DS13 USERS GUIDE
(Preliminary Version) BC Notice Copyright 2018, MilDef Crete Inc. All rights reserved. No part of this publication may be reproduced and modified without the written permission of MilDef Crete Inc. MilDef Crete Inc. reserves the right to make changes in the products or the product specifications without any prior notice. Customers are advised to contact MilDef Crete Inc. for updated product information. MilDef Crete Inc. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties for the correctness of this book, nor any license grant of MilDef Crete Inc.'s patents or intellectual properties. MilDef Crete Inc. assumes no liability for customer's loss or damage caused by using this document. Trademarks Trademark Acknowledgments Intel is a registered trademark of Intel Corp. All product and company names are trademarks or registered trademarks of their respective holders. I Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF exposure warming This equipment must be installed and operated in accordance with provided instructions and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Regulatory Information/Disclaimers Installation and use of this computer must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. II Federal Communications Commission regulatory compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important:
Changes or modifications to this product not authorized by MilDef could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. In order to maintain compliance with FCC regulations, compliant peripheral devices and shielded cables must be used with this equipment. III CE Declaration of Conformity the Approximation of the Laws of The device is hereby confirmed to comply with the requirements set out in the Council Directive on to Electromagnetic Compatibility Directive (2014/30/EC) and Complies with the essential requirements of Article 3 of the R&TTE 2014/53/EC Directive, if used for its intended use and that the following standards have been applied:
1. Health (Article 3.1(a) of the R&TTE Directive) the Member States relating Applied Standard(s):
EN 50566 EN 62479:2010 2. Safety (Article 3.1(a) of the R&TTE Directive) IEC 62209-2:2010 Applied Standard(s):
EN 60950-1:2006 /A11:2009 /A1:2010 /A12:2011 /A2:2013 3. Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive) Applied Standard(s):
EN 301 489-1 V2.1.1/ -17 V3.1.1 4. Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive) Applied Standard(s):
EN 300 328 V2.1.1 5. Electromagnetic Compatibility Directive (2004/108/EC) EN 55032: 2012 EN 55022:2010 EN 55024:2010+A1:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 Power Conservation This computer consumes less power compared to conventional consumer computers. The power consumption may be the Power Management Setup. It is recommended that the power saving features be enabled even when not running on battery power. Power Management features can conserve power without degrading system performance. further reduced by properly configuring IV Power Safety There are specific power requirements for your computer:
Only use an approved AC adapter designed for this computer. There is a 3-prong grounded plug for the AC adapter. The 3rd prong is an important mechanism for ensuring product safety. Please do not neglect the importance of this mechanism. If you are unable to access a compatible outlet, please hire a qualified electrician to install a compatible outlet for you. When unplugging the AC power cord, please make sure to disconnect the cord by pulling from the plug head instead of pulling from the wire to prevent wire damage. Make sure the power outlet and any other extension cord(s) you use can support the total current load of all the connected devices. Before cleaning the computer, please make sure it is disconnected from any external power source. Warning Before any upgrade procedures, make sure the power is turned off, and all the cables are disconnected. Also, it is advisable to remove your battery to prevent your computer from accidentally turning on. V Battery Precautions Only use batteries designed for this computer. Using incompatible battery types may cause explosion, leakage or damage to the computer. Do not remove the battery from the computer while the computer is powered on. Do not continuously use a battery that has been dropped, or that appears damaged
(e.g. bent or twisted) in any way. Even if the computer is able to continuously work with a damaged battery, the circuit damage may occur and possibly cause fire. Always use the charger designed for this computer to recharge the battery. Incorrect recharging may cause the battery to explode. Do not try to repair a battery by yourself. For battery service or replacement, please contact with your service representatives. Please dispose damaged battery promptly and carefully. Explosion or leakage may occur, if the battery is improperly handled or discarded. Notice:
For safety, charging will stop if the internal temperature of the battery is out of range(<0C;
>50C). Please note that charging could have stopped before the ambient temperature reaching these boundaries because the internal temperature of the battery does not equal to the ambient temperature. Battery Disposal & Caution:
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its service life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. Danger of explosion may possibly occur, if the battery is incorrectly replaced. Replace only with the same or the equivalent battery recommended by the manufacturer. Discard the used battery according to the manufacturers instructions. VI Environmental Information, Material Safety & Recycling All materials used in the manufacturing of this equipment are recyclable or environmentally friendly. Please recycle the packing materials in accordance with local regulations at the end of the product's service life. Notice:
The equipment may contain insignificant amount of hazardous substances for health and environment below control level. To avoid spreading such substances into the eco system and to minimize the pressure on the natural environment, you are encouraged to reuse or recycle most of the materials in a safe way after the products service life. For more information on collection, reuse and recycle of materials, please consult local or regional waste administrations for more information. You can also contact your dealer for more information on the environmental details of the equipment. The symbol of the crossed out wheeled bin indicates that the product
(electrical and electronic equipment) should not be placed in municipal waste. Please check local regulations for disposal of electronic products. VII TABLE OF CONTENTS CHAPTER 1 - GETTING STARTED ............................................................... 1 UNPACKING .................................................................................................................. 1 APPEARANCE OVERVIEW ............................................................................................... 2 READY FOR USE ............................................................................................................ 6 CHAPTER2 - OPERATING INFORMATION .................................................. 8 START USING YOUR TABLET COMPUTER ......................................................................... 8 STOP USING YOUR TABLET COMPUTER .......................................................................... 9 WORKING WITH POWER BUTTON (HEATER KIT) ............................................................. 10 INSTALLING OPERATING SYSTEM .................................................................................. 11 USING INDICATORS AND KEYPAD .................................................................................. 11 CALIBRATION OF TOUCH SCREEN ................................................................................. 15 USING MSATA SSD .................................................................................................... 17 USING MICRO SD CARDS ............................................................................................. 18 INTEL RAPID START TECHNOLOGY ............................................... !
OPERATING WIRELESS DEVICES ................................................................................... 19 USING LIGHT SENSOR ................................................................................................. 24 CHAPTER3- MANAGING POWER .............................................................. 25 AC ADAPTER .............................................................................................................. 25 BATTERY .................................................................................................................... 26 BATTERY RECALIBRATION ............................................................................................ 29 ACPI SUPPORT .......................................................................................................... 30 USB FAST CHARGING ................................................................................................. 31 CHAPTER 4 - BIOS SETUP ......................................................................... 32 MAIN MENU ................................................................................................................ 32 ADVANCED MENU ........................................................................................................ 33 TrustedComputingSubMenu...........................................................................................35 SATAConfigurationSubMenu...........................................................................................36 Intel(R)RapidStartTechnologySubMenu.......................................................................37 USBConfigurationSubMenu............................................................................................38 RFDeviceControlConfigurationSubMenu......................................................................39 ECThermalControlSubMenu..........................................................................................40 ACINBOOTControlSubMenu..........................................................................................40 USBCHARGEControlSubMenu........................................................................................42 CHIPSET MENU ........................................................................................................... 43 PCHIOConfigurationSubMenu.......................................................................................43 BOOT MENU ............................................................................................................... 45 SECURITY MENU ......................................................................................................... 46 SAVE & EXIT MENU ..................................................................................................... 47 CHAPTER 5 DRIVERS AND APPLICATIONS ......................................... 48 CHIPSET ...................................................................................... !
VGA ........................................................................................... !
AUDIO ......................................................................................... !
INTEL ME .................................................................................... !
INTEL RAPID STORAGE TECHNOLOGY ............................................ !
WIRELESS POWER MANAGER ........................................................ !
TURBO BOOST MONITOR .............................................................. !
GIGABIT LAN (OPTION) ................................................................ !
WIFI (OPTION) ............................................................................. !
BLUETOOTH (OPTION) .................................................................. !
GPS (OPTIONAL) ......................................................................... !
TPM (OPTIONAL) ......................................................................... !
USB3.0 (FOR WINDOWS 7) .......................................................... !
LAN (FOR DOCKLITE) ................................................................... !
USB TO COM (FOR DOCKLITE) .................................................... !
CHAPTER 6 SPECIFICATIONS ................................................................ 49 PLATFORM .................................................................................................................. 49 CPU .......................................................................................................................... 49 PCH ........................................................................................... !
MEMORY .................................................................................................................... 49 TOUCH SCREEN .......................................................................................................... 49 STORAGE ................................................................................................................... 49 BUTTONS/FUNCTION KEYS ........................................................................................... 50 AUDIO ........................................................................................................................ 50 I/O PORTS .................................................................................................................. 50 CASE ......................................................................................................................... 51 DIMENSIONS AND WEIGHT ............................................................................................ 51 POWER ....................................................................................................................... 51 ENVIRONMENTAL, SAFETY & EMC ................................................................................ 52 OPERATING & STORAGE TEMPERATURE ........................................................................ 52 MATERIALS AND RECYCLING ........................................................................................ 52 CHAPTER 7 OPTIONAL DEVICES .......................................................... 53 COMMUNICATION ......................................................................................................... 53 MEMORY CARD ............................................................................ !
SECURITY ................................................................................................................... 53 AMG SENSOR MODULE ............................................................................................... 53 MIL. FISCHER CONNECTOR .......................................................................................... 53 EXTERNAL VEHICLE ADAPTER ...................................................................................... 53 EXTERNAL USB KEYBOARD ......................................................................................... 54 MINI KEYBOARD KBD .................................................................................................. 55 CHAPTER 8 MAINTENANCE AND SERVICE .......................................... 56 CLEANING ................................................................................................................... 56 TROUBLESHOOTING ..................................................................................................... 56 RMA SERVICE ............................................................................................................ 57 GettingStarted Chapter 1 - Getting Started Unpacking The following components come with your computer. If anything is missing or damaged, please notify the dealer immediately. Computer unit AC Adapter AC Power Cord Utility DVD Quick Guide Chapter One - 1 Appearance Overview GettingStarted Note:
The following illustrations show the tablet mounted on optional devices, which may not appear on your devices. 4 5 6 3 2 Front 2 1 1. Power Button 2. Function keys & Input Lock Key 3. LED Indicators 4. Touch Screen 5. Light sensor 6. Embedded digital Mic Chapter One - 2 GettingStarted 2 3 Rear 1 1. Removable battery pack 2. Removable mSATA SSD 3. HD Audio & mono Speaker Chapter One - 3 Left GettingStarted 1 2 1. Optional Fischer I/O (From left to right X4, X3, X2, X1) Choose 1~4 out of 6 as below:
- USB 2.0 x1
- COM x 2 (RS232 x 2 or RS232 x1/RS422 x 1)
-
- Audio x1
- Sealed Headset (Headphone out/Mic-in Combo) x1 2nd GLAN x1 2. Standard: Mini DisplayPort x 1/USB3.1 x 2 Optional: Mini DisplayPort x 1/USB3.1 x 1/ GLAN x 1 Right 1 2 1. DC-In 12~32V
- Default: Fischer 3-pin connector 2. Kensington cable lock slot Chapter One - 4 Top GettingStarted 3 2 1 1. Micro SD Card Slot 2. Optional Built-in Wi-Fi Antenna 3. Optional Built-in GPS Antenna Bottom 3 1 3 2 1. Docklite connector 2. Optional Built-in Wi-Fi/BT Antenna 3. Ext. Antenna signal Chapter One - 5 GettingStarted Ready for Use After taking a quick look at your tablet computer, the following illustrations will get you ready for using it. 1. Mounting the Battery A. Mount the battery into the battery bay. B. Turn the battery lock counter-clockwise and lock firmly with a flat-head screwdriver or a coin. A B 2. Connecting the AC Adapter A. Insert the DC Jack firmly. Note:
When unplugging the Fischer conn. from the DC Jack, please always hold on the outer sleeve of the plug, as the image shows, to unlock and pull out:
B. Plug the AC cord into the AC adapter. C. Plug the AC power plug into an electrical outlet. Chapter One - 6 GettingStarted 3. Turning ON the Power A. Make sure the battery is securely mounted. Connect all power cords properly. B. Turn on the power of your tablet computer by pressing and holding the Power Button
(approx. 2 seconds) until the SSD/ Heater Indicator lights on (Color: orange). Note:
The computer is able to turn ON without any battery mounted once all the power cords are connected. 4. Turning Off the Power Directly tap Shut down from your OS to turn OFF the power of your tablet computer. If your tablet computer stops responding, press and hold the power button for 4~5 seconds to Force Shut down your tablet computer. Note:
Directly turning off the power of your tablet computer by Force Shut down will cause all unsaved data to be lost and is not recommended. Chapter One - 7 OperatingInformation Chapter2 - Operating Information Start Using Your Tablet Computer Always turn on your tablet computer by using the power button. This is the standard operating procedure to start using your tablet computer. After turning on the power of your tablet computer, it will start with the Operating System (OS) installed. Boot Up When you turn on the power, your computer will start to load the OS into the system memory. This start-up procedure is called boot up. Power On Self-Test (POST) Each time your computer is turned on, the BIOS will automatically perform a self-test of CPU, memory, hardware devices, and so on. Chapter Two - 8 OperatingInformation Stop Using Your Tablet Computer Each time when you finish working with your tablet computer, there are several ways to stop your tablet computer from operating. Shut down Directly click Shut down from your OS to turn OFF the power of your computer. Before shutting down, please do remember to save unfinished works and close your applications to prevent your SSD from suffering possible data loss or damage. Shut down will turn OFF power of your computer. If you want to start your computer again, you need to turn it ON again by pressing the power button. Sleep Under Sleep mode, the system will temporarily save your work into the computers RAM. If you want to start your computer again, please press the power button to resume. Under Windows 8, you can enter this mode by directly clicking:
Move your cursor to the upper-right or lower-right corner of the screen, and then click Settings => Click Power => Click Sleep. Hibernate Under Hibernate mode, the system will save your work into SSD. If you want to start your computer again, you need to press and hold the power button (approx. 2 sec.) until the SSD/Heater indicator lights on. Under Windows 8, you can enter Hibernate mode by directly clicking:
Move your curse to the upper-right or lower-right corner of the screen, and then click Settings => Click Power => Click Hibernate. Force Shut Down In the event that your tablet computer hangs or stops responding, you can perform a force shut down by pressing and holding the power button for 4~5 seconds. Please note that any unsaved work or data will be lost this way. Chapter Two - 9 OperatingInformation Working with Power Button (Heater Kit) DS11 M-model is equipped with a heater kit to enable work under low temperature. The heater will heat up the LCD to the temperature for booting up the system. Also, the heater will constantly monitor LCD temperature. Once the temperature becomes lower, the heater will heat up again to maintain the temperature for operation. Note:
When ambient temperature is under -15 C (the default setting for your tablet computer), the system may not boot up immediately. System will beep with Heater LED light flashing orange to indicate that the heater is in operation. After 3~10 minutes
(depending on the ambient temperature), the system will boot up automatically. In emergency situations, you can skip the heating process by pressing and holding the power button for 9~11 seconds then release. The speaker will beep with a special sound to signify that the heating process has been skipped (Please note that not all devices are guaranteed to work properly in this case). Press the power button again during the heating process will shut down the computer. The following is a list of functions associated with your tablet computers power button:
1. Press and hold for 9 ~ 11 seconds:
The system will skip heating process and force boot up. 2. Press and hold for 5 ~ 8 seconds:
Enable/Disable the sound of Heater. 3. Press and hold the power button for 4 seconds under OS:
Shut down the system. 4. Press the power button for functions including:
a. Power on the system. b. Force Shut Down. c. Sleep/Hibernate (Dependent on OS settings). Chapter Two - 10 OperatingInformation Installing Operating System Your computer is designed to operate with Microsoft Windows 7 or Windows 8 32 / 64-bit Operating System. Please connect your computer with an external USB-interface drive to start the OS installation. Note:
A USB hub may be required during installation to connect with an external USB-interface ODD, as the System USB port may not supply enough power. Please connect your USB hub with extra power supply to complete the installation. Indicators and Function keys LED Indicators LED Indicator Description Power/ S3 Indicator:
Green/ Flashing Green mSATA SSD/ Heater Indicator:
Green/ Orange Charger/ Battery Low Indicator:
Orange/ Flashing Orange Chapter Two - 11 Function Keys OperatingInformation Function Lock key is used to switch function of the other buttons. Press the function Lock key to switch between 2 layers. The indicator under the function Lock key will light up if the other buttons are in 2nd layer and it will be turned off if in 1st Layer. Button 1st Layer Brightness Up Brightness Down Rotation Lock Volume Up Volume Down 2nd Layer A1
(User settable) A2
(User settable) A3
(User settable)
+
-
Tab Esc Ctrl Alt Enter Del Function Lock Input Lock Windows Key Chapter Two - 12 OperatingInformation Setting Function for Buttons A1~A3 Hotkey Manager is an app which could be used to quickly set up and change between multiple functions for A1, A2 and A3. Please follow these procedure to use it. 1. Operate the Hotkey Manager then a menu will show up. 2. Scroll down to select function for each key. 3. Click and the setting will be saved automatically. Chapter Two - 13 4. The blank could be filled with related parameter according to the selected function. E.g. Fill in the address to use the function Open URL in default browser. OperatingInformation Available Function Items List None Open/ Execute a selected file Open URL in default browser Change display output Brightness up Brightness down Volume up Volume down Volume mute Launch on-screen keyboard Launch Windows Mobility Center Launch File Explorer Launcher Device Power Manager Input Lock key To prevent from unexpected input by buttons and touch screen, you can press Input Lock key. When Input Lock function is on, the input from devices including buttons and touch screen will be locked. To cancel the input lock function, just press the Input Lock key again and the indicator will be turned off. Chapter Two - 14 OperatingInformation Calibration of Touch Screen Calibration If you find that the touch screen doesnt respond accurately, you may try to fix the problem with the embodied calibration function. However, if the touchscreen type of your tablet is capacitive rather than resistive, the calibration might cause interference and make the inaccuracy problem worse. To calibrate your touch screen, please follow the instruction below. Control panelTablet PC SettingsCalibrate Chapter Two - 15 OperatingInformation Note:
If you are unaware of the type of your touch screen, calibration should be avoided. Reset In case the calibration is operated accidently and results in interference and inaccuracy, you can choose reset in the same page. Chapter Two - 16 OperatingInformation Using mSATA SSD Your tablet is equipped with mSATA SSD for data storage. The mSATA SSD is removable for convenience. It can ONLY be removed while power is OFF. To remove the mSATA SSD module, please follow the steps below:
1. Loosen the screws on Back Door Cover, and then remove the cover. 2. Hold the two ends of the mSATA SSD module. 3. Remove the mSATA SSD module from the connector. Note:
Do not expose mSATA SSD directly to high temperature, high humidity, and other hazardous environment. NEVER try to disassemble the module. Static discharge may destroy your device and data. Chapter Two - 17 OperatingInformation Using micro SD Cards Your tablet computer is equipped with a micro SD card slot. The slot supports SDHC, SDXC, UHS-1 type micro SD cards. To avoid damages caused by misinsertion, please insert your micro SD card into the card slot properly with the connectors facing down, as shown below. Chapter Two - 18 Operating Wireless Devices For your ease of operations, you can turn on/off your wireless devices through the proprietary software application - Device Power Manager. OperatingInformation Note:
Depending on the configuration of your tablet computer, your Device Power Manager menu may appear differently from the screenshots provided in this section. When you adjust User Account Control (UAC), a security feature in Windows, the setting value of Device Power Manager will be affected. So, once there is any adjustment on UAC, please uninstall Device Power Manager and reinstall it again. Bluetooth (Option) The Bluetooth module provides your tablet computer with a short-range wireless communication protocol to connect with other compatible devices via the pre-installed embedded antenna. To activate your Bluetooth functions, please follow the instructions below. 1. Driver & Application Installation a. b. Install the Bluetooth driver first. Read from the Utility DVD and find the directory listed in the readme file to finish installation. Install the Device Power Manager application. Read from the Utility DVD and find the directory listed in the readme file to finish installation. Chapter Two - 19 2. Launch the Device Power Manager OperatingInformation After launching the utility, please tap Bluetooth to enable the Bluetooth function (tap again to disable). Once the Bluetooth function starts up, the wireless LED indicator
(color blue) will turn on and the Bluetooth icon will show up in the operating system accordingly. Tap Bluetooth to enable the Bluetooth function (tap again to disable). Once the Bluetooth function starts up, the wireless device LED indicator will turn on (color blue) and the Bluetooth icon will appear in the OS accordingly. Chapter Two - 20 OperatingInformation Wireless LAN (Option) Wireless LAN is an optional wireless communication module for your tablet computer. An embedded antenna will be pre-installed in your tablet computer to access the internet wirelessly. To activate your Wireless LAN function, please follow the illustrations below:
1. Driver & Application Installation a. Install the Chipset Driver first. Read from the Utility DVD and find the directory listed in the readme file to finish installation. b. Then, install the Device Power Manager application. Read from the Utility DVD and find the directory listed in the readme file to finish installation. 2. Launch the Device Power Manager After launching the utility, please tap Wireless LAN for enabling the Wireless LAN function (tap again to disable). Tap Wireless LAN to enable the Wireless LAN function (tap again to disable). Once the Wireless LAN function starts up, the wireless device LED indicator will turn on
(color blue) and the Wireless LAN icon will appear in the OS accordingly. Chapter Two - 21 OperatingInformation GPS (Option) GPS is an optional module for your tablet computer. This GPS module supports both GPS and GLONASS systems. An embedded antenna is pre-installed in your tablet computer to support the functions of your GPS and GLONASS. 1. Driver & Application Installation a. b. Install the Device Power Manager application:
Read from the Utility DVD and find the directory listed in the readme file to finish installation. Install the GPS driver:
GPS (Driver): Read from the Utility DVD and find the directory listed in the readme file to finish installation. Tap GPS to enable the GPS function (tap again to disable). 2. Navigation & Mapping Software Installation Please install your 3rd party navigation and mapping software after installing your GPS driver. Refer to your navigation and mapping software manual for installation and procedures on application setup and access. Once the GPS function starts up, the wireless device LED indicator will turn on (color blue). Chapter Two - 22 OperatingInformation Note:
Wireless devices can be turned ON/OFF through BIOS. Once a device is turned off through BIOS, its button on the Device Power Manager will be colored in yellow and with a prohibition marker. For example, the following illustration shows that WLAN and GPS devices are disabled through BIOS. To turn on, please enter into BIOS and enable the functions. For more information on BIOS setting, please refer to RF Device Control Configuration Sub-Menu section. Chapter Two - 23 OperatingInformation Using Light Sensor Light sensor can detect the ambient light and adjust the brightness of your tablet computer, hence improving user experience and power savings. Please enable the function from the setting below:
Chapter Two - 24 ManagingPower Chapter3- Managing Power AC Adapter The AC adapter performs two functions:
-
-
-
The adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. The following are recommended when using the AC adapter:
- Use a properly grounded AC outlet.
- Use one AC outlet exclusively for the computer. Having other appliances on the same It powers the computer from an external AC source. It charges the computer battery. line may cause interference.
- Use a power strip with built-in surge protection. Connect the AC adapter:
- Plug the AC cord to the adapter.
- Plug the other end of the AC cord into the wall outlet. Make sure the green LED on the adapter turns on.
- Attach the DC plug into the power jack of the computer. AC Adapter Indicator The green LED indicates that AC power is ready. Chapter Three - 25 ManagingPower Battery The computer will automatically switch to battery when the external power source (AC adapter or optional vehicle adapter) is disconnected. Battery Power Saving Tips The computer comes with an intelligent power-saving feature. You may extend the battery life by:
- Setup power saving functions in Operating System Power Management options (e.g. Windows Power Options). Lower the intensity of the display by brightness control.
-
- Turn the computer into standby (by Sleep or Power button) when it is temporarily not in use.
- Shut down the computer when it will not be in use for longer period of time. Battery Low When the battery is nearly exhausted, the computer gives the following Battery Low warnings:
- Windows battery low warning.
- The power LED flashes. Once the Battery Low warning occurs, please:
- Save and close the files you are currently working on then shut down the computer.
- Plug in AC or vehicle adapter to recharge the battery. Charging the Battery Plug in the AC adapter to start the battery charging. If the battery is already full, the sense circuitry will stop high current charge within several minutes. Charge indicator turns ON when the battery is charging and turns OFF when the battery charging is completed. Chapter Three - 26 ManagingPower Battery Level You may check battery status from Operating System. In Windows, you can click the power/battery icon to reveal the battery gauge window. The following is the illustration of Battery Gauge in Windows OS. An alternative way to check the battery level is by viewing the battery gauge on the battery pack. By pressing the button, indicators will be on. There are four indicators, and the more indicators are on, the more power remains in the battery. In other words, if the capacity of the battery pack is full, all indicators will be on, and if the capacity is nearly drained, no indicator will be on. Chapter Three - 27 ManagingPower Note:
Battery characteristic varies depending on factors such as ambient temperature, charging method, load current, aging, etc. For example, the chemicals of the battery are more inactive at low temperature, thus decreases the output power. The battery gauge should only be used as a reference. Please do not expect it to show the exact amount of the power remaining. There is no memory effect on Lithium Ion battery cells. However, discharge the battery to nearly empty every month will help calibrating the internal gauge. Chapter Three - 28 ManagingPower Battery Recalibration Battery recalibration allows users to maintain the battery in a healthy condition. To perform battery recalibration, please follow the steps as below:
1. Update BIOS & EC to the latest version. 2. Insert the battery to the computer, and connect it to AC adapter. 3. Enter the BIOS => Choose Advanced menu => Choose Battery Recalibration =>
Press Enter. 4. When the Start Battery Recalibration pop-up appears, press Yes to continue. (Before you run the battery calibration, please make sure that the battery level must be LOWER than 95% ; otherwise, the calibration cannot work.) 5. The recalibration is now processing. You can see the following recalibration status on the screen:
- Calibration Frequency: How many times the calibration is processed
-
-
-
Battery Capacity: Current battery capacity Battery Charge Mode: Charge/Discharge Battery Learning Mode: Normal (charge)/Learn (discharge) 6. A pop-up appears when the calibration is completed. Then click OK. 7. Press Yes to reboot the computer when Reset Without Saving pop-up appears. Chapter Three - 29 ManagingPower Note:
Do not turn off the LCD and do not remove AC adapter during the calibration. One cycle of recalibration process indicates Charge to Full => Start Learn Mode
=> Discharge => Complete Learn Mode => Charge to Full. It will take approx. eight hours for a cycle. It requires five cycles to complete the battery recalibration. Then the recalibration will stop automatically. If you want to terminate the calibrating, simply shut down the computer by pressing Power Button or just press "CTRL+ALT+DEL" to restart. ACPI Support Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. With ACPI and an ACPI-compliant operating system (such as Microsoft Windows), this feature will allow you to reduce the power consumption and conserve energy. By supporting ACPI, the AC adapter LED and the Power indicator LED will show in different ways. The followings are detailed descriptions of LED indicators and their meanings:
Sleep:
AC adapter LED is ON (while connecting with power) Power LED indicator is flashing Green; other LED indicators are OFF Hibernate:
AC adapter LED is ON (while connecting with power) Power LED indicator is OFF; other LED indicators are OFF Shut down:
AC adapter LED is ON (while connecting with power) Power LED indicator is OFF; other LED indicators are OFF Chapter Three - 30 ManagingPower USB Fast Charging Your tablet supports USB fast charging feature, enabling to quickly charge your fast-charging compatible devices. But note, fast charging is not supported in every power mode. The following table shows details for USB Charging information:
Mode AC Battery AC Battery AC Battery Power off Power on S3 USB 3.0 Charging Features Fast charging supports No charging Normal charging Normal charging Fast charging supports Fast charging supports Chapter Three - 31 Chapter 4 - BIOS Setup Optional Devices BIOSSetup Press [F2] or [Delete] at boot up to enter BIOS setup. Use arrow keys to select options and
[+/-] to modify them. When finished, move to Exit and press [Enter] then confirm save by pressing [Y]. Main Menu Main Advanced Chipset Boot Aptio Setup Utility BIOS Information BIOS Vendor Core Version Compliancy Project Version Build Date and Time EC Version System Language
[English]
System Date System Time Access Level
[Tue 06/02/2015]
[16:19:20]
Administrator Security Save & Exit Choose default language the system
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Note:
The contents may vary depending on computer configurations. Incorrect settings may cause system malfunction. To correct it, restore the Optimized Defaults with F3. Main Menu Selections You can make the following selections on the Main Menu. Use the sub-menus for other selections. Feature Options System Date MM/DD/YYYY System Time HH:MM:SS Description Set the system date Month, Day, Year. Set the system time Hour, Minute, Second. Chapter Four - 32 Optional Devices BIOSSetup Security Trusted Setting Save & Exit Computing
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Aptio Setup Utility Boot Advanced Menu Main Chipset Advanced Trusted Computing SATA Configuration Intel (R) Rapid Start Technology USB Configuration Super IO Configuration RF Device Configuration EC Thermal Control AC IN BOOT Control USB CHARGE Control Battery Recalibration Intel (R) Smart Connect Technology Network Stack Configuration Intel 82574L Gigabit Network Connection Chapter Four - 33 Advanced Menu Selections You can make the following selections on the Advanced Menu. Optional Devices BIOSSetup Feature Trusted Computing SATA Configuration Intel (R) Rapid Start Technology USB Configuration Super IO Configuration RF Device Control EC Thermal Control AC IN BOOT Control USB Charge Control Intel Smart Connect Technology Network Stack Configuration Intel 82574L Gigabit Network Connection Options Disabled Enabled SATA Mode Selection SATA Test Mode Aggressive LPM Support SATA Controller Speed Disabled Enabled Disabled Enabled Serial Port 0~3 Configuration Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Description Security Device Suppott SATA Mode Selection:
IDE, AHCI, RAID Enable or disable Intel (R) Rapid Start Technology. Legacy USB Support USB3.0 Support XHCI Hand-off EHCI Hand-off GSM, GPS, BLUETOOTH, WLAN Thermal cooling trip point Enabled to boot the device by connecting power (Auto Power-On) Enable/Disable ISCT Configuration Enable/Disable UEFI Network Stack Click device port to configure the network Chapter Four - 34 Optional Devices BIOSSetup Trusted Computing Sub-Menu Aptio Setup Utility Advanced Configuration Security Device Support Current Status Information SUPPORT TURNED OFF
[Disable]
support Enables or Disables BIOS for security device. O.S. will not show Security EFI Device. protocol and INT1A interface will not be available. TCG
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 35 Optional Devices BIOSSetup SATA Configuration Sub-Menu Aptio Setup Utility Advanced SATA Mode Selection SATA Test Mode Aggressive LPM Support SATA Controller Speed Serial ATA Port 0 Software Preserve Serial ATA Port 1 Software Preserve Serial ATA Port 2 Software Preserve
[AHCI]
[Disabled]
[Enabled]
[Gen3]
Empty Unknown Empty Unknown SATA SSD (120.0 SUPPORTED Determine how SATA controller(s) operate.
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit SATA Configuration Sub-Menu Selections You can make the following selections on the SATA configuration sub-menu. Feature SATA Mode Selection SATA Test Mode Aggressive LPM Support SATA Controller Speed Options Description Determine how controller(s) operate SATA Enable or disable Test Mode Enable PCH to aggressively enter link power state Indicates the maximum speed the SATA controller can support IDE AHCI RAID Disabled Enabled Disabled Enabled Gen1 Gen2 Gen3 Chapter Four - 36 Optional Devices BIOSSetup Intel (R) Rapid Start Technology Sub-Menu Aptio Setup Utility Advanced Intel (R) Rapid Start Technology [Disabled]
Enables or disable Intel
(R) Start Technology Rapid
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 37 Optional Devices BIOSSetup USB Configuration Sub-Menu Aptio Setup Utility Advanced 1 point USB Configuration USB Devices:
Legacy USB Support USB3.0 Support XHCI Hand-off EHCI Hand-off
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. Disable option will keep USB devices available only for EFI applications
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit USB Configuration Sub-Menu Selections You can make the following selections on the USB configuration sub-menu. Feature Legacy USB enabled Options Disabled Enabled Disabled Usn3.0 Support Enabled XHCI Hand-off Disabled Enabled EHCI Hand-off Disabled Enabled Description Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Enable/Disable USB3.0 (XHCI) Controller support. This is a workaround for OSes without XHCI hand-off support. This XHCI ownership change should be claimed by XHCI driver. This is a workaround for OSes without EHCI hand-off support. This EHCI ownership change should be claimed by EHCI driver. Chapter Four - 38 Optional Devices BIOSSetup RF Device Control Configuration Sub-Menu Aptio Setup Utility Advanced RF Device Control GSM STATUS GSM GPS STATUS GPS BT STATUS BLUETOOTH WLAN STATUS WLAN Present
[Enabled]
Present
[Enabled]
Present
[Enabled]
Present
[Enabled]
RF Device Control Setting
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit RF Device Control Configuration Sub-Menu Selections You can make the following selections on the RF Security Control sub-menu. Feature Options Description WWAN Wireless LAN Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled BlueTooth GPS Wireless Lan Control Enabled Wireless function WWAN Control Enabled WWAN function GPS Control Enabled GPS function BlueTooth Control Enabled Blue Tooth function Chapter Four - 39 Optional Devices BIOSSetup EC Thermal Control Sub-Menu Advanced EC Thermal Control Thermal cooling trip point [79 C]
Aptio Setup Utility EC Thermal Control Setting
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit EC Thermal Control Sub-Menu Selections You can make the following selections on the EC Thermal Control sub-menu. Feature Options Description Thermal cooling trip point 71 C 79 C 87 C AC IN BOOT Control Sub-Menu Advanced AC IN BOOT AC IN BOOT Control Aptio Setup Utility
[Enabled]
AC IN Boot Control Setting
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 40 Optional Devices BIOSSetup Note:
The device will automatically boot whenever it is connecting to the AC power once AC IN BOOT Control is enabled. Default value is set as disabled, the change will be activated after reboot. Chapter Four - 41 Optional Devices BIOSSetup USB CHARGE Control Sub-Menu Aptio Setup Utility Advanced USB CHARGE USB CHARGE Control
[Disabled]
USB CHARGE Setting
: Select Screen
: Select Item Enter: Select
/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Note:
USB Charge control is for turn On /Off the USB charge function under S5 state (Power off) when connecting to AC Adapter When enable USB CHARGE control in BIOS, please cold boot your computer to enable the function. Chapter Four - 42 Chipset Menu Optional Devices BIOSSetup Aptio Setup Utility Boot Main Advanced Chipset PCH-IO Configuration System Agent (SA) Configuration Security PCH Parameters Save & Exit
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chipset Menu Selections You can make the following selections on the Chipset sub-menu. Feature Description PCH-IO Configuration System Agent (SA) Configuration PCH Parameter System Agent (SA) Parameters Options PCH-IO Configuration Sub-Menu Aptio Setup Utility Chipset Intel PCH RC Version Intel PCH SKU Name Intel PCH Rev ID PCI Express Configuration USB Configuration PCH Azalia Configuration 1.6.0.0 QM77 04/C1 PCI Express Configuration settings
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Chapter Four - 43 Optional Devices BIOSSetup PCH-IO Configuration Sub-Menu Selections You can make the following selections on the PCH-IO Configuration sub-menu. Feature PCI Express Configuration USB Configuration PCH Azalia Configuration Options Description PCI Express Configuration settings USB Configuration settings PCH Azalia Configuration settings Disabled Enabled Disabled Enabled Disabled Enabled Chapter Four - 44 Optional Devices BIOSSetup Boot Menu Aptio Setup Utility Boot Main Advanced Chipset
[Legacy]
[Hard Disk:...]
[CD/DVD]
[USB Hard Disk]
[USB CD/DVD]
[USB Key]
[USB Floppy]
[Network]
Boot mode select Boot Option Priorities Boot Option #1 Boot Option #2 Boot Option #3 Boot Option #4 Boot Option #5 Boot Option #6 Boot Option #7 CSM parameters Hard Disk Drive BBS Priorities Network Device BBS Priorities Security Save & Exit boot Set LEGACY/UEFI mode
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit The system will try to boot from device on top then the 2nd and so on. If there is more than one device in each category, only the device on top of sub-menu can boot up. Boot Menu Selections You can make the following selections on the Boot menu. Feature Boot mode select Boot Option
#1 Boot Option
#2 CSM parameters Hard Drive BBS Priorities Options Description Select boot mode LEGACY/UEFI Sets the system boot order Sets the system boot order OpROM execution, boot options filter, etc. Set the Boot Device Priority sequence from available Hard Disk Drives LEGACY UEFI Chapter Four - 45 Security Menu Optional Devices BIOSSetup Aptio Setup Utility Main Advanced Chipset Boot Password Description If ONLY the Administrators password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the Users password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights. The password length must be in the following range;
Minimum length Maximum length Administrator Password User Password Secure Boot Menu HDD Security Configuration:
PO: .xxx 3 20 Security Save & Exit Set Administrator Password
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Security Menu Selections You can make the following selections on the Security Menu. Feature Administrator Password User password Secure Boot Menu Options Enter New Password Confirm New Password Enter New Password Confirm New Password Secure Boot Control Secure Boot Mode Description Controls detection of Processor Serial No. System must be reset or restarted from power-on for settings to take effect. Supervisor Password controls access to the setup utility. Customizable Secure Boot settings Chapter Four - 46 Optional Devices BIOSSetup Aptio Setup Utility Chipset Boot Security Save & Exit Exit system setup after saving the changes
: Select Screen
: Select Item Enter: Select
+/: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Save & Exit Menu Main Advanced Save Changes and Exit Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Options Save Changes Discard Changes Restore Defaults Save as User Defaults Restore User Defaults Boot Override PO: XXX IBA GE Slot 0200 v1398 Chapter Four - 47 Optional Devices DriversandApplications Chapter 5 Drivers and Applications The Utility DVD includes all the drivers for the devices installed in your tablet computer. Please consult your dealer if there are any driver missing. Also, you could update the driver or check if there any driver need to be installed by "Windows device manager". Please check the readme.txt file on Utility DVD to get the information for driver installation. Chapter Five - 48 Specifications Chapter 6 Specifications Platform Intel Kaby Lake-Y Platform CPU Intel Ivy Bridge i7-7Y75 Processor ,4 MB Cache Memory 16GB System Memory
-
-
Touch Screen Type:
Resolution:
Optional Invisible mode on/off M model:
Resistive Single Touch Screen Brightness (min.~ typ.): 650~765 nits I model:
Capacitive Multi Touch Screen Brightness (min.~ typ.): 780~910 nits Industrial grade LPDDR3 1866MHz 10.1 WUXGA (16:10) 1920 x 1200 pixels Note:
Invisible Mode On/Off controls all light sources on/off, including LCD B/L, LED Indicators & Keypad B/L. Invisible Mode trades-off with Fischer conn. x 1. Storage Removable mSATA SSD 128GB/256GB/512GB Industrial Grade Chapter Six - 49 Specifications Buttons/Function Keys Power button (front side) Membrane Function Keys with LED Backlight Audio HD Audio and mono Speakers Embedded Digital Mic I/O Ports Left:
Standard: Mini DisplayPort x 1/USB3.1 x 2 (the rightmost USB port, with a lightening mark on the cap, supports fast charging function) Optional: Mini DisplayPort x 1/USB3.1 x 1 /GLAN x 1 Optional Fischer I/O:
-
Choose 1~4 out of 6 as below:
USB 2.0 x 1 COM x 2 (RS232 x 2 or RS232 x 1/RS422 x 1)
-
- GLAN x 1 Audio X 1
-
Sealed Headset (Headphone out/Mic-in Combo) x 1
-
Note:
Sealed headset trades-off with invisible mode switch. Mini DisplayPort version: DisplayPort 1.1a. DS13 does not support Dual-Mode DisplayPort(DP++) so an active DisplayPort adapter is necessary. Bottom:
Docklite Connector: 32-pin POGO (Hot Swappable) Ext. ANT Signals x2 Expansion ports:
Standard Micro SD card slot Chapter Six - 50 Case CNC milled Aluminum Color: Black, NATO Green Dimensions and Weight Dimensions (mm):
Specifications 286 (L) x 193 (W) x 27 (H) (with Bumpers) Weight: 1.39kg (With battery) 1.09kg (Without battery) Note:
Weight varies depending on system configurations. Power Battery Pack:
Type:
Capacity:
Dimensions:
Weight:
AC Adapter Input Voltage:
Frequency:
Output Voltage:
Maximum Power:
Dimensions:
Weight:
DC-In:
12~32V
- Fischer 3 pin Connector Prismatic Lithium Ion Cell 11.1V/ 4200mAh (3S2P) 138 mm (W) x 136 mm (D) x 9.7 mm (H) Approx. 300 gram (0.66 lb.) AC 100 - 240V 50/60 Hz DC 19V 90 Watts 133 mm (W) x 58mm (D) x 30mm (H) Approx. 400 g (0.88 lb.) Chapter Six - 51 Specifications Environmental, Safety & EMC CE, FCC, WEEE, REACH, RoHS, IP65, MIL-STD-810G, MIL-STD-461G Operating & Storage Temperature Operating Temp.:
-
Standard: -20 C ~ +60 C*
- Optional: -30 C ~ +60 C*
*LCD with Heater Storage Temp.: -40 C ~ +70 C Materials and Recycling Materials of the computer are as follows:
Magnesium case: AL6061T6 PCB:
Battery:
Packing:
FR-4, UL 94V0 Rechargeable Lithium Ion cells Carton: Unbleached paper Cushion: Recyclable PE Carrying bag: Recyclable PE Fiber Quick Guide: Paper Please recycle the parts according to local regulations. Chapter Six - 52 OptionalDevices Chapter 7 Optional Devices Communication WiFi/Bluetooth:
-
Intel Dual Band wireless- AC 8265 Board Form Factor: M.2 2230 E-key Card
-
- Wi-Fi Certified: 802.11 a/b/g/n/ac
-
Bluetooth: Supports BT 4.2 (Backward compatible) Interface: PCIe (WiFi)/USB (BT)
-
GPS:
-
U-blox M8N (USB interface) Security BIOS password and Kensington cable lock slot are available to safely secure your computer. Optional TPM (Trusted Platform Module) version 2.0 is also supported, preventing unauthorized access to your computer. AMG Sensor Module AMG Sensor Module is designed for automatic screen rotation when you turn the tablet computer from landscape to portrait and back. It is especially convenient for you to turn to an appropriate view when using different apps. Mil. Fischer Connector Optional Fischer connectors provide solutions for users to operate the device in harsh environments. Signals designed for usage include USB2.0, VGA, RS232 or RS422, GLAN, and Audio. External Vehicle Adapter The External Vehicle Adapter, EVA1275, is designed to directly connect equipment to the vehicle power system, converting the input voltage 12~32V to output 19V. Fischer 3-pin plug is available designed for DS11. Chapter Seven - 53 OptionalDevices External USB Keyboard An optional 89-key external USB keyboard with LED backlight and IP rating of IP54 is available for your tablet computer. The detailed specification is provided below:
89-key layout emulates 101/102-key KB Life: >1 million times, water/dust protection up to IP54 Back-light illumination (backlight device: green LED) PS/2 compatible Trackpoint and mouse buttons Dimensions: 323.4 mm (W) x 172 mm (D) x 25 mm (H) Weight: 1.1 kg Track point The track point is functionally equivalent to a mouse. Pushing the track point may move the cursor on the screen. The 2 buttons act same as mouse buttons. Backlight Press [I-O] key for approximately 1 second turns keyboard backlight ON or OFF. Chapter Seven - 54 OptionalDevices Mini Keyboard KBD Mini Keyboard KBD is designed for all models. KBD also brings convenience of use through multi-language keyboard versions and USB interface. The detailed specification is provided below:
USB interface with 30 cm USB cable StickPointer to simulate mouse and keypad Currently support versions:
66-Key design with function keys to simulate standard keyboards. English (UI), English (UK), German (DE), Swedish (SV) and Russian (RU) 5 versions. LED Backlight Caps Lock, Number Lock, Scroll Lock, and Smart Card Reader LED Indicators Magnesium Alloy Case (Black) Operating Temperature: -20 ~ 50C (-4 ~ 122F) Storage Temperature: -40 ~ 70C (-40 ~ 158F) Optional Built-in Smart Card Reader Dimensions: 190 mm (W) x 90 mm (D) x 12 mm (H) Weight: 170 g IP55 Chapter Seven - 55 Chapter 8 Maintenance and Service Cleaning ALWAYS turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. An air gun is recommended for cleaning water and dust. For salty water please clean with fresh water then blow-dry with an air gun. Troubleshooting Should the tablet computer fail to function properly, the troubleshooting steps below may be followed. Power Problems:
When I turn on the Tablet computer, it does not respond.
-
-
I cannot return from Hibernation while on battery power
-
- Hard reset the device by pressing the power button for 4 seconds Unexpected or improper shutdown causes BIOS to reset to Optimized Default
-
If you are using battery power, check if the battery is charged If you are using AC power, ensure that the connection of AC adapter is correct. This could be a power problem. Please connect the AC power adapter to fix the abnormal shutdown problem. The battery might be drained. Please plug the tablet into AC power. Minimize the configuration, i.e. remove extra peripherals and devices. Remove the modules one by one (SSD, Battery, etc.). Remove the software suspected. Set BIOS fail-safe default. Re-install operating system and application software. RMA Service If troubleshooting solutions are unsuccessful, consult your dealer for RMA. Shipping instructions:
1. Remove any personal add-on devices or other media. 2. Use the original shipping container and packing materials, if possible. 3. 4. If the original packing materials are not available, wrap the equipment with soft material (e.g. PU/PE form) then put the wrapped equipment into a hard cardboard shipping box. Include a sheet with the following information: (Note: Please keep a copy of this sheet for your records.)
-
Name
-
Address
-
Unit serial number
-
Place and date of purchase or the original invoice number
-
Date of failure
-
A DETAILED description of the problems you have encountered including: The operating system, the add-on device installed (if any), the application software, the failure phenomenon, etc.
-
A list of the hardware/software configuration, if applicable. 5. Clearly mark the outside of the shipping box with the RMA #. If an RMA # is not present on the shipping box, receiving will be unable to identify it and it might be returned. 6. Unless prior arrangements have been made, the customer is responsible for all shipping costs. Unauthorized use of the companys shipping accounts is not permitted.