FCC INFORMATION FCC INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not used these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
~ Reorient or relocate the receiving antenna
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Model:W307 FCC ID:OVJW307 1 LOCATION OF CONTROLS LED Display MAIN MODES Current Time 12 Hours System Touch Mode Time Step Month/Day Watch Strap Battery Power Meter Calorie Distance MAIN FUNCTIONS
status.
exercise time and target completion rate.
incoming phone No.and call name in English
(Android OS). 2 Exersice Time Goal Progress Alarm Missing Call Unread Message Incoming call Name(in English)
& Phone No. 3 Sleep Mode FUNCTIONS OF WRISTBAND READ BEFORE USING WRISTBAND POWER SOURCE APPS (APPLICATIONS) INSTALLATION ANDROID APP 1. For the first time to use Activity Tracker, touch and hold for 5s to wake up the tracker and go to time mode. Time will default display 12:00. 2. Each touching the mode will wake up the display and it will enter power saving mode automatically after no operation for 20s under any mode display. 3. Clear all data(steps, calories burned, distance, target goal) of the day at midnight. 4. Touch and hold for 5s at any mode, except Time Mode, it will enter sleep mode. At sleep monitor mode, touch and hold for 5s to wake up the wristband and go back to the mode before sleep monitor. When alarm rings under sleep mode, the vibration will also wake up the wristband. 5. When in Sleep Mode, datas could not be synced to the apps. 6. Android Phones: after paired with wristband, the wristband could display incoming phone name in English and phone NO., quantity of missing call and unread message. The unit has a built in DC 3.7V Li-polymer rechargeable battery, recharge it before first time use (or when the battery was consumed, appear on the display) as follows:
1. Take out the unit from the Watch Strap as the figure below:
Before first time use, download and installed the suitable App (Application) from the iPhone store/Google Play Store as below:
If you are using smart Phone, download and installed the App Craig Tracker from iPhone Store/Google Play Store or into your cell phone. BT (BLUE TOOTH) PAIRING:
In first time BT pairing, increase the unit to the BT device list in your Smart Phone as below:
1. After installed the App into your Smart Phone, turn on your Smart Phone BT, found the logo of App in your Smart Phone then open it, the follows figure will appear on the screen:
List of compatible phones:
2. Connect the small round plug from the supplied Charging Cable to the DC IN Jack on the unit. 3. Connect the full size USB plug to the USB port on a computer or any USB charger with DC 5V output. Charging will auto start. During charging, the scale bars on the Battery Power Meter will blink. When finished, it will stop blinking. Notes:
Your battery will last longer if you following these simple guidelines for charging and storing. A. Recharging and store the unit within the temperature range of 5C~35C (40F~
95F). B. Do not over charge (longer than 1 hour). Excessive charging or discharging may shorten the batterys life. C. Battery life naturally shortens slowly over time. D. The rechargeable battery incorporated in this product is not user replaceable. Brand iPhone Samsung Google Phone Type iPhone 4S iPhone 5 iPhone 5C iPhone 5S iPhone 6 iPhone 6plus iPod iPad Galaxy S3 Galaxy S4 Galaxy S5 Galaxy S6 Note II Note III Note IV Nexus4/Nexus7/Above Android 4.3 above Google Play Operang System App Store iOS 7.0.0 above iOS 7.0.0 above iOS 7.0.0 above iOS 7.0.0 above iOS 7.0.0 above iOS 7.0.0 above iOS 7.0.0 above iOS 7.0.0 above Android 4.3 above Android 4.3 above Android 4.3 above Android 4.3 above Android 4.3 above Android 4.3 above Android 4.3 above iPhone Store iPhone Store iPhone Store iPhone Store iPhone Store iPhone Store iPhone Store iPhone Store Play Store Play Store Play Store Play Store Play Store Play Store Play Store MEIZU MX4 Android 4.3 above Google Play Bluetooth wait approx. 2 seconds Bluetooth 4.0 above 2. After setting personal data, touch back, it will appear below figure; then touch on the upside of the screen to enter, the follows figure will appear on the screen:
4.Wait until the Name CC431, of the unit appear on the screen;
(During searching make sure the display of the unit is illuminate. If it is auto turned off, touch the Button to turn it on again.) 5. Touch the device No. CC431, and keep the wristband illuminate, this column to start pairing.
~Touch the paired device address, can connect and unpair the unit. 7.Touch Back, below screen will appear. 3. Touch BT Pairing, the follows figure will appear on the screen;
6. When paired, a small will pop up on the screen as the figure below. SETTINGS:
After BT paired, set or reset the personal information into the unit as bellows:
: Setting Wristband info.
~ Daily Goal: Set or reset your step goal.
~ Stride: Set or reset your stride in inch.
~ Wear Way: Set or reset direction of wristband display.
~ Sedentary Reminder: Set or reset do exercise.
~ Alarm Clock: Set or reset time alarm.
~ Real Time Synchronization: Send data in unit to app each 1.5 seconds.
~ UnPaired: unpaired the device. When finished, touch Back button on the screen to save and exit to setting menu.
: Setting Personal Info
~ Users NamePls enter a name.
~ Gender: Set or reset your gender.
~ Age: Set or reset your age.
~ Height: Set or reset your body height in cm.
~ Weight: Set or reset your body weight in kg. When finished, touch the Back button on the screen to save and exit to setting menu. 8. After Setting, touch Back to come to the step interface. Drop down interface to sync datas. IPHONE APP BT (BLUE TOOTH) PAIRING:
In first time BT pairing, increase the unit to the BT device list in your iPhone as below:
1. After installed the App into your iPhone, turn on your iPhone BT, found the logo of App in your iPhone then open it, the follows figure will appear on the screen:
Touch Trust wait approx. 2 seconds 3. After Paired with device, please touch Next, below figure will appeart on the screen, then setting personal data, touch Acomplish, it will appear below figure;
SETTINGS:
After BT paired, set or reset the personal information into the unit as bellows:
: Setting Wristband info.
~ Daily Goal: Set or reset your step goal.
~ Stride: Set or reset your stride in inch.
~ Wear Way: Set or reset direction of wristband display.
~ Sedentary Remind: Set or reset alarm to do exercise .
~ Vibration Alarm: Set or reset time alarm.
~ Real Time Synchronization: Send data in unit to app each 1.5 seconds.
~ UnPaired: unpaired the device. When finished, touch Back button on the screen to save and exit to setting menu. 5. After Setting, touch Back to come to the step interface. Drop down interface to sync datas.
: Setting Personal Info
~ Users NamePls enter a name.
~ Gender: Set or reset your gender.
~ Age: Set or reset your age.
~ Height: Set or reset your body height in cm.
~ Weight: Set or reset your body weight in kg. When finished, touch the Back button on the screen to save and exit to setting menu. To drop down interface to pair and unpair device. 2.It will show below figure to search and pair with device. 4. Then touch on the upside of the screen to enter, the setting figure will appear on the screen:
4 5 6 7 8 9 10 11 12 13 14 15 16 17