FCC ID: 2AJAS9WPIKA010901 PIKA-CONN

User Manual

• Step1:

Connect Display and camera by hdmi and usb

cable form PIKA-CONN

• Step2:

Let PIKA-CONN and laptop in the same

wireless area network ( Router)

• Step3:

Laptop connect to Router

• Step4:

Enable Millitronic APP, you can screen cast to

display, and turn on the web cam

Caution:

- 5GHz band (W52): Indoor use only (except

communicate to high power radio)

- W52屋内使用限定 ただし登録局に接続

される場合は除く

Web

Cam

HDMI signals

USB signals

Display monitor

Wireless screen casting

Windows Computer

© 2020 MILLITRONIC - Confidential & Proprietary

• Federal Communication Commission Interference Statement

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one of the following measures:

• ● Reorient or relocate the receiving antenna.

• ● Increase the separation between the equipment and receiver.

• ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• ● Consult the dealer or an experienced radio/TV technician for help.

•

• FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate this equipment.

•

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

•

• This device is restricted for indoor use.

•

IMPORTANT NOTE:

•

• FCC Radiation Exposure Statement:

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 20cm between the radiator & your body.

© 2020 MILLITRONIC - Confidential & Proprietary

• IMPORTANT NOTE:

• This module is intended for OEM integrator. This module is only FCC authorized for the specific rule

parts listed on the grant, and that the host product manufacturer is responsible for compliance to

any other FCC rules that apply to the host not covered by the modular transmitter grant of

certification. The final host product still requires Part 15 Subpart B compliance testing with the

modular transmitter installed.

• Additional testing and certification may be necessary when multiple modules are used.

•

• 20cm minimum distance has to be able to be maintained between the antenna and the users for the

host this module is integrated into. Under such configuration, the FCC radiation exposure limits set

forth for an population/uncontrolled environment can be satisfied.

• Any changes or modifications not expressly approved by the manufacturer could void the user's

•

authority to operate this equipment.

© 2020 MILLITRONIC - Confidential & Proprietary

• USERS MANUAL OF THE END PRODUCT:

• In the users manual of the end product, the end user has to be informed to keep at least 20cm

separation with the antenna while this end product is installed and operated. The end user has to be

informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be

satisfied.

• The end user has to also be informed that any changes or modifications not expressly approved by

the manufacturer could void the user's authority to operate this equipment.

• This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference

received, including interference that may cause undesired operation.

•

•

© 2020 MILLITRONIC - Confidential & Proprietary

• The final end product must be labeled in a visible area with the following " Contains TX FCC ID:

• This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference

received, including interference that may cause undesired operation.

• LABEL OF THE END PRODUCT:

2AJAS9WPIKA010901".

•

• Ant List

Ant. Port Brand

Model

Name

Antenn

a Type

Connector

Gain (dBi)

5G

Band 1

5G

Band 4

1

2

1 Millitronic

2 Millitronic

5SN0000

00007

5SN0000

00007

PCB

Antenna

PCB

Antenna

I-PEX

4.11

3.51

I-PEX

4.11

3.51

© 2020 MILLITRONIC - Confidential & Proprietary

Millitronic 7F.-6, No.237, Sec.1,Datong Rd. Xizhi Dist.,New Taipei City Confidential Letter Date: 2021/2/5 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID : 2AJAS9WPIKAO10901 To Whom It May Concern:

Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby respecttfully request confidential treatment of information accompanying this application as outlined below:

e Block Diagrams e Schematics e Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

e@ External Photos e Internal Photos e Test Setup photos e Users Manuals Respectfully, Applicant's company name > Millitronic Applicant's company address : 7F.-6, No.237, Sec.1 Datong Rd. Xizhi Dist.,New Taipei City Signature Semgy Name and Job Title > Sam Yu/N/A E-Mail > samyu@millitronic.com.tw Tel > +886-2-2648-6697 #188 Fax : +886-2-2648-6697

Module Approval Request Letter Date: 2021/2/19 Subject: Module Approval 2. FCC ID: 2AJAS9WPIKA010901 To Whom It May Concern:

We, Sporton International Inc., are authorized by Millitronic to have their state-of-the-art device approved under module approval authorization. The application of this module is specified to mobile host equipment. The requirements regulated in CFR47 Part 15.212 have been fulfilled and clearly explained below. 1. The requirement of RF shielding: The shielding of the radio portion can be demonstrated in exhibition External Photo. The requirement of buffered inputs: Buffered data inputs stage has been integrated in chip BCM43752A2XKUBG. The requirement of power supply regulation: The part number of the power regulator is SY8113IADC. The requirements of section 15.203 and 15.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. The requirement of stand-alone test configuration: Please reference exhibition Test Configuration Photo for the stand-alone test configuration. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the users manual of this module. Please also see the exhibition Label Sample. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance has been clearly stated in the Users Manual. The requirement of RF exposure: Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. 3. 4. 5. 8. 6. 7. Please do not hesitate to contact me for any questions of this request letter. Thank you. Company name

: Sporton International Inc. Company Address

: No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Signature Name Job Title

Leo Huang

: Manager

Millitronic 7F.-6, No.237, Sec.1,Datong Rd. Xizhi Dist.,New Taipei City Power of Attorney Date: 2021/2/5 Dear Sir,

| hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jnubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : Leohuang@sporton.com.tw

|am therefore responsible for the contents of the application. FCC ID: 2AJAS9WPIKAO10901 Respectfully, Applicant's company name > Millitronic Applicant's company address : 7F.-6, No.237, Sec.1,Datong Rd. Xizhi Dist., New Taipei City Signature Name and Job Title > Sam Yu/N/A E-Mail > samyu@millitronic.com.tw Tel > +886-2-2648-6697 #188 Fax > +886-2-2648-6697

Millitronic 7F.-6, NO.237, Sec.1,Datong Rd. Xizhi Dist.,New Taipei City SDoC Attestation Letter Date: 2021/2/5 We Millitronic, as the grantee of this project (FCC ID: 2AJAS9WPIKAO10901 / Brand Name:

Millitronic / Model No.: PIKA-CONN), would like to declare that the composite portion has been authorized under the Supplier's Declaration of Conformity procedures (Sporton report No.: FD0D1428, FCC designation number: TW1096). The final product shall consequenily comply with the FCC rule applied for SDoC Procedure. Respectfully, Applicant's company name > Millitronic Applicants company address : 7F.-6, No.237, Sec.1,Datong Rd. Xizhi Dist., New Taipei City Signature Name and Job Title > Sam Yu/N/A E-Mail > samyu@millitronic.com.tw Tel 1 +886-2-2648-6697 #188 Fax > +886-2-2648-6697