FCC ID: 2A3PS66T0 Automotive Wireless Charger

MINDA INDUSTRIES LIMITED AWC 66T0 User Manual Document:

AWC 66T0 User Manual Date: 21-Sept-2021 Device Details:

Device Name : Automotive Wireless Charger Type No. / Model No. :

66T0 1 | P a g e MINDA INDUSTRIES LIMITED AWC 66T0 User Manual Wireless Charging of the mobile phone:

1) Wireless Charging Pad 2) Wireless Charging Status Indicator LED 3) Charging Unit :

(3) 2 | P a g e MINDA INDUSTRIES LIMITED AWC 66T0 User Manual Information:

The wireless charger charges only the Qi-compliant mobile phones. Read the mobile phone user manual or visit your mobile phone manufacturers website to check whether your mobile phone is Qi-compliant and support Qi Wireless Charging. 1. Electrical / General Characteristics OPERATING GUARANTEED VOLTAGE RANGE NOMINAL VOLTAGE OUTPUT POWER (AT RECEIVER DEVICE) 7V to 16V 12 VDC 15W @ 12V 3 | P a g e MINDA INDUSTRIES LIMITED AWC 66T0 User Manual Application: Charging Mobile phone:

1. To Start Wireless charging, clear all objects from the wireless charging pad including Key FOB. 2. Objects including Key FOB may interrupt the wireless charging if placed along with the mobile phone on wireless charging pad. 3. Place the mobile phone with wireless charging feature on the Wireless Charging Pad. Close all the doors and turn ACC ON. 4. Align the mobile phone to the centre of wireless charging pad if wireless charging is not initiated after mobile phone placement. 5. Wireless charging can be enable/disable from Infotainment system. 6. Charging status will be shown on Wireless Charging Status Indicator LED & Infotainment System. Wireless Charging Status Indicator:

Wireless Charging Status Indicator LED Pattern Color Status No Light Light Up Light Up Light Up Light Up Blinks

(20 blink 10 sec OFF)

Amber Blue Green*

Red Red No Charging.

(Vehicle Key OFF / Door open / Key FOB operation) Ready for charging Charging in progress Charging completed Wireless Charging malfunction Metal object present in charging tray / Mobile phone placement not aligned to center / Mobile phone over heated / Non-Qi standard mobile phone

/ Charging error

*Applicable only for mobile phones publishing Charging Complete Status Mobile Left Out Alert:

1. At the end of the drive, while leaving the vehicle, Wireless Charger will detect the presence of mobile phone. 2. Mobile left our alert will be published on Instrument Cluster as soon as driver door is open. 4 | P a g e MINDA INDUSTRIES LIMITED AWC 66T0 User Manual AWC Installation in the vehicle:

AWC is located in the centre console of the vehicle, the AWC is located in such way that the compatible device (phone) can be placed and removed easily from the end user. The charging face (coil face) of the AWC is facing the A pad area where the phone is placed in coin Box 5 | P a g e MINDA INDUSTRIES LIMITED AWC 66T0 User Manual Warning Statements :

1. Place the mobile phone always at the center of the charging pad for best charging experience. If the mobile phone is not aligned to the centre, slow charging may be experienced and for few mobile phones will experience higher heating during charging. 2. Charging will be interrupted (Indicator LED blinking with RED color) if the mobile phone orientation/alignment is not correct or if any foreign metal object or KEY FOB is present &

detected on the wireless charging pad. Indicator LED continues to blink with RED Color till the phone is not re-placed/re-aligned or metal object/KEY FOB is not removed from the wireless charging pad. 3. Presence of metal objects on charging pad during charging may result in heating/safety issue. 4. Wireless charging may be interrupted due to abnormal temperature level in the mobile phone. Remove the mobile phone from the wireless charging pad and wait till the mobile phone temperature reaches to suitable level for wireless charging. 5. Do not place Credit Cards, Debit Cards, Access Cards, Data Storage cards, or other objects sensitive to Electromagnetic fields on the wireless charging pad. They may get damaged by electromagnetic fields of wireless charger. 6. If liquids enter the wireless charging pad, the charging pad may be damaged. 6 | P a g e MINDA INDUSTRIES LIMITED AWC 66T0 User Manual Compliance Statements:

FCC 15.19 Labelling Requirement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC 15.21 Information to user:

Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. FCC 15.105(b) Warning Statement :

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment equipment does cause harmful interference to radio reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by the following measures:

-Consult the dealer or an experienced technician for help. RF Warning Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 7 | P a g e

50 QR CODE AREA Produc Name : YFG-Automotive Wirless Charger Suzuki Part No: 38490-76700 MIL Part No.:CD-A07-008-00-E00 Product Serial No.:XXXXXX Homologation ID:66T0 Range of Operating frequency: 1274 2 KHz Name Of Business Partner: M862 Manufacturing Country:INDIA Nominal Voltage : 12 VDC Manufacturing Name : Minda Ind. Ltd Trademark of Mfg : UNO MINDA

@ 24 50 10R - O6XXXX KE CE FCC ID : 2A3PS66TO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. niee| Location

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 4 Rev 7.0

(11.02.2022) To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2A3PS66T0 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent i Permanent Permanent Permanent Permanent Permanent i Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, days; or for a specified date of not to exceed 180 days from the Grant Date SCS-F019: Confidentiality Request Letter Page 2 of 4 Rev 7.0 Clients signature:

Clients name & title: Mr Arun Kumar Arora Contact information / address: Minda Industries Ltd. D-64/1, Wazirpur Industrial Area, Delhi - 110052 i Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 3 of 4 Rev 7.0 SCS-F019: Confidentiality Request Letter Page 4 of 4 Rev 7.0

1 | Power transfer frequency is less that 1 MHz be Power from each primary __ equal The consist f Clients. primary _present, _pairsmay _ powered time. placed directly contact with the transmitter Mobile exposure conditions only (portable exposure conditions byithis exclusion). |

Hefield anywhere at beyond 15 surrounding _device, inda Industries td. Date: |[|/02/2022 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2A3PS66TO To Whom It May Concern:

This letter is to ascertain that Automotive Wireless Charger, Product 6610, has been the units used for conducting FCC compliance testing, and it meets KDB 680106 DO1 v03r01, Clause 5(b) all 6 conditions as stated below hence PAG is not required. coil is less than or to 15 watts of more than one source primary coils, charging one or more lf more the coil be on at the same in . are not covered or cm the and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are are demonstrated to _less than 50% of MPE limit. If you have any question or concerns, pls. contact us. Sincerely, Clients signature 7 Name: Arun Kumar Address: Minda Industries Ltd. B-64/1, Wazirpur Industrial Area, Delhi MINDA INDUSTRIES LID. (Controfler Division) First Floor, Gat NO. 427/10, 427/5, Village - Mahafunge, Tal. - Khed, Dist. - Pune - 410501. INDIA. Tel. - +91 2135-668100, Fax No. - +91 2135 668205. Email:info@mindegroup.com www.unominda.com, Regd.Offica: B-64/1, Wazirpur Industria! Area, Delhi-110 052. CIN NO for Corporate: L74899DL1 99PLC050333 NK NSP RE