a PRO-@
RF HOME SECURITY SYSTEM M9310 RF 2.4GHz TRANSMITTER
| M9320 RF 2.4GHz RECEIVER M9500 HIGH SENSITIVITY CAMERA INSTRUCTION MANUAL PLEASREAD ALL INSTRCUTIONS IN THIS MANUAL BEFORE USING THE PRODUCT AND KEEP IT INA SAFE PLACE FOR FURTHER REFERENCE tama Dear Customer Thank you for purchasing this product, For optimum performance and Safety, please read these operating instructions carefully, BEFORE INSTALLATION M9310 RF TRANSMITTER FEATURES. PT,
| DESCRIPTION FUNCTION CONNECTION <-000 0022-00 re
: M9320 RF RECEIVER eee eel, 9 FEATURES 9 9 WW CONTENTS OF PACKAGE TU ee 9 DESCRIPTION FUNCTION Tee eee, 10 CONNECTION (INCLUDING OPTIONAL ACCESSARIES) ---------. 1]
INSTALLATION oe TECHNICAL TERMS ee. 13 SETTING tre. 14 EXAMPLES BU eee eee, 15 FOR REFERENCE ONLY INSTALLATION OF CAMERA wwe. 16 TROUBLE SHOOTING DU eee eee 17 WARNING (00. 17 INSTRUCTION MANUAL 8 a BEFORE INSTALLATION M9310 FEATURE Hl M9310 RF 2.4GHz TRANSMITTER are with 4 channels for choice and could connect the following cameras to monitor via your TV, Multi applications for security of home, office, shop, etc..
*Optional cameras for M9310 1.M9500A (NTSC) /M9500B (PAL) With built-
COLOR PIR CAMERA in: 1. High sensitive microphone 2. High resolution color camera 3. High sensitive infrared motion detector and with the
"ding-dong" notice when triggered. 2.M9500C (EIA)/ M9500D (CCIR) B/W PIR CAMERA With built-in : 1, High sensitive microphone 2. High resolution camera with IR LED to enhance the view in dark 3. High sensitive infrared motion detector and with the ding-dong notice when triggered. 3.M9500E (NTSC) / M9500F (PAL) COLOR CAMERA With built-in ; 1.High sensitive microphone 2.High resolution color camera 4,M9500G (EIA) / M9500H (CCIR) B/W CAMERA With built-in : 1.High sensitive microphone 2.High resolution camera with IR LEO to enhance the view in dark G RF HOME SECURITY SYSTEM se] aca eWalelt CONTENTS OF PACK Check the packing carton for these accessories. EY M9310 RF Transmitter Eh Ac adapter (DC 12V 300mA) The drawing of AC Adapter will change with different countries, Fixing parts includes:
1. Fixing metal plate X 1 2. Fixing parts for metal plate X 1 3. Fixing screw for metal plate X 2 4. Screw X 2 5. Wall mounted parts X 2 6. Small Screw X 3 BE] mos00 High sensitive Camera
@ Fixing parts for installation camera includes:
1. Screw X 2 2. Wall mounted parts X 2 3 .NailsX5 4. L-shape adjusting too for fixing the view of camera X 1 INSTRUCTION MANUAL 8 Main UnitA
@ Flatantenna
@ CAMERA IN
@ Socket for connecting power
(ere DC 12V 300mA) Main Unit B
@ Power switch (POWER) Power indicator Channel switch( CORD |
Main Unit Cc
@ (FAR/NEAR)transmission distance switch Fixing hole for metal plate Fixing hole for the rack of metal plate 3. The distance between each transmitters and receivers should be equal. 4. Avoid to have the metal boards between transmitters and receivers RF HOME SECuRITY SYSTEM PRE-|
Before Systen CON]
Bag;
(Re
*NOT 1.Pa 2.Th Tagetal cap he Caron PRE-TESTING System with TV to pre-test the all functions work well CONNECTION :
@ Connect the camera with M9310 transmitter. _ @Connect the ac adapter with M9310 transmitter.
*Please note that the AC adapter will change with different country. Please use the one enclosed.
@Connect with the Power supply
@adjust the view of camera to the most proper Position and fixed it.
(Refer to page 16)
*NOTE BEFORE INSTALLATION CONNECTION Ey Please fix the metal Plate to the Proper position. E2 Fix the part@on the buttom of transmitter.
[Ql Put the transmitter on the metal plate and then fix them by the screws. 8 RF HOME SECURITY SYSTEM accessories, EY 119320 pF Receiver E} Base for M9320 ac Adapter (DC 12 500mA)
*% The drawing of AC adapter will]
change with different country, B) scart Cable (only for CCIR/PAL system}
Avcable (only for EIANTSC system) INSTRUCTION MANUAL E BEFORE INSTALLATION DESCRIPTION FUNCTION :
Main Unit A
@ Power
@ EbIT
@ AUTO/ MANUAL
@ BUZZER INDIcaToRS PoweR INDIcaToR
@ AUTO MopE INDICATOR TRIGGER INDICATOR CHtINDICATOR
@ Ch2 INDICATOR
@ ch3 INDICATOR Cha INDICATOR Main Unit B
@ ANTENNA (YANT)
@ DC INPUT SOCKET (oe: DC12V 500ma) Socket for connecting VCR Remote Controller (M9830) (AUX) VIDEO aupio
@ TRIGGER t RF HOME SECURITY SYSTEM Connect Ty with M9329 receiver 3. Yellow to VIDEO IN b. White toAUDIO IN C. Red to TRIGGER
@ Connect ac adapter Connect Power Supply a. Yellow to VIDEO IN D. White to AUDIO IN c. Red to TRIGGER
@ Connect ac Adapter
@ Connect Power Supply Connect M9830 vcR Remote Controlter(optionay accessary) 4nd put the tr transmitter to the VCR receiving window.
*M9830 VCR Remote controler only applicable to PIR camera M9500A/BICIp, EY ElA/ NTSC TV System
(Connect TV with M9320 receiver a. Yellow to VIDEO IN b. White to AUDIO IN c. Yellow to VIDEO d. White to AUDIO
@ Connect AC adapter
@ Connect Power Supply Bi WHEN EIA/NTSC TV CONNECT WITH VCR
@ Connect with TV and VCR for ElA/ NTSC system
@ Connect the VCR with M9320 receiver a. Yellow to VIDEO IN b. White to AUDIO IN c. Yellow to VIDEO d. White to AUDIO
@ Connect AC Adapter
@ Connect Power Supply Connect M9830 VCR Remote controller(optionat accessary) and put the IR transmitter to the VCR receiving window.
*M9830 VCR Remote controller E RF HOME SECURITY SYSTEM only applicable to PIR camera M9S500A/B/C/D. 3.1 om TECHNICAL TERMS 1. Manual mode POWER indicators will light on (Refer to Page 10) and the AUTO indicator is off, 2. Automatic mode automatic mode, the POWER, AUTO, CHANNEL indicators wilt light on and switch the channel in turns according to your setting. 3. Trigger (only for the PIR Camera M9500A/B/C/D channel triggered.) INSTRUCTION MANUAL E MODE SETTING a AUTO/MANUAL operation mode:
Push the button AUTO/MANUAL"
till the indicator "AUTO" tight on, means setting in the mode "AUTO"
When the indicator "AUTO" light off, means setting into the mode "MANUAL". 8 Automatically channels switch :
Switch into the mode "MANUAL" firstly. Push the button "EDIT", then the red indicators will light on in turns of two three->four>two- three indicators---, which means the cameras into the automatic mode. After the above setting, push the button "AUTO/MANUAL" to "AUTO", then successfully set into the automatic mode Switching interval time :
2, 4, 6 seconds three modes for choice. Switch into the "AUTO" firstly., Push the button "EDIT", then the red indicators will light on in turns of twothree fourtwo-three indicators---, which means 2 seconds (two indicators on),4seconds (three indicators on), 6seconds (four indicators on) in turns The receiver will execute after 3 seconds. RF HOME SECURITY SYSTEM 4)t 2.0 1) 2) 3)s 4)!
5)!
6):
1. One transmitter ang one receiver, with manual operation mode :
1) Turn the power ON. 2) Set up the manual operation mode, (Refer to Page 14) 3) Switch the channet by the button"
CH2-CH3-CH4 by turns. 1) Turn the power ON. 2) Set up the manual operation mode. (Refer to page 14) 3} Adjust the antennas of each transmitter by th button
"AUTO/MANUAL? to have the bestimage and voice 4) Push the button "EDIT" to set the total connected monitoring transmitters. (Refer to page 14), 5} Set up the automatic operation mode (Refer to pa. ge 14) to switch each channels automatically, page 14) LU INSTRUCTION MANUAL E BEFORE INSTALLATION INSTALLATION OF GAMERA Please note the following instructions while you install the M9500 camera serial. POSITION
we BB | Sg
<< e) x The camera can be positioned virtually anywhere indoors or outdoors When mounting outdoors select a position where the camera will not be directly exposed to rain or other adverse weather conditions. The camera must be positioned so that it will not point directly into the sun or other bright light, as they may damage to the camera. Also avoid viewing areas where half the area is in bright sunlight and the other half is in the dark. The best viewing angle is achieved at greater heights with the camera pointing down. The camera should be mounted out of reach, to stop anybody tampering with it. A good fixing position is above a doorway. INSTALLATION Your camera is adjustable both horizontalty (180) and vertically
(30) via a ball joint, which is secured with a wrench (supplied Fixing screw with the system), which can be ny Jocked into the position once your installation is complete. Do not over-tighten the screw as this may stop you from loosening it to Z
make any slight adjustment in the future 30. Please note do nat adjust the camera over the angel: vertical 30 and horizontal 180 as this will damage the camera. Vertical adjust Horizontal adjust RF HOME SECURITY SYSTEM TROUBLE SHOOTING If you experience any difficulty with the system, check the following points for possible misuse before calling service. 1. Not switch on the 1.Make sure the power turn on transmitter or receiver. 2. The connection between Camera and transmitter not well 3. Channels set of transmitter doubled. 4. The direction of flat antenna not correctly Cannot receive the image ornot 2.Check every connection. clear image.
(Set tothe AV channet) 3. Chack the settings of each transmitter, should be different. 4. Adjust the antenna to the most Proper position, The transmissio will be better with higher location 5. The connection between receiver and TV not wel 6. The tocations of transmitter and receiver are close to the microwave oven, or heavy load machines. 7 Transmitter with short distance interfere the one with long distance. 5. Check the wiring. 6. Move to the proper position. Switch the bottom switcher FAR or NEAR" of near one to "NEAR". the range of PIR 1. The view angle of the camera is too high or too low. 2. Located around hot atmasphere. not well (only for
- Adjust the view of the
; camera. the camera with PIR,M9500A/B/C/D
. Adjust the location of camera. With picture, but no voice heard
- Audio output of receiver not connected well 2 Volume of TV set to low or set the mute. Check the connection.
-Adjust the settings of Tv. WARNING 1.TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD,DO NOT EXPOSE THIS APPLANCE TO RAIN OR MOISTURE. 2.D0 NOT INSERY ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. 3.TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONAL ONLY. INSTRUCTION MANUAL a FOR REFERENCE ONLY SPECIFICATIO M9310 RF TRANSMITTER RATED VOLTAGE : 110-240VAC FREQUENCY : CH1/2411MHz CH2/2434MHz CH3/2453MHz CH4/2473MHz DISTANCE : 30M/100FT(OPEN SPACE) ANTENNA: FLAT ANTENNA VEDIO SIGNAL : VEDIO INPUT 1Vp-p/75.Q AUDIO SIGNAL : AUDIO INPUT MAX : 1.5Vp-p POWER CONSUMPTION : DC 12V/300mA OPERATION TEMPERATURE : 0C~40C WEIGHT : 220g DIMENSION : 95X43X120mm (WxHxD) M9320 RF RECEIVER RATED VOLTAGE : 110-240VAC FREQUENCY : CH1/2411MHz > CH2/2434MHz CH3/2453MHz > CH4/2473MHz ANTENNA : Band Antenna u VEDIO SIGNAL : VEDIO OUTPUT 1Vp-pi76.Q2 AUDIO SIGNAL : AUDIO OUTPUT MAX : 1.5Vp-p POWER CONSUMPTION : DC12V/500mA OPERATION TEMPERATURE : OC~40T WEIGHT : 300g DIMENSION: : 45X113X152mm (WxHxD ) E RF HOME SECURITY SYSTEM FOR REFERENCE ONLY SPECIFICATION. M8500 HIGH SENSITIVITY CAMERA SEIRES SINGNAL OUTPUT : 1Vp-p/75Q.COLOR & B/W FREQUENCY : MAX 800mV(10K 9) MOTION DETECTOR : PIR(M9500A-M9500D) ul RESOLUTION : COLOR CAMERA/350TV LINE B/W CAMERA/320TV LINE EFFICIENT PIXELS : NTSC 512X492 PAL 628 X 582 EIA 320 X 240 Y CCIR 352 X 288 WEIGHT : 210g DIMENSION : 90 X 135 X 110mm (WxHxD) NOTE:
Specifications are subject to chang without notice Weighout and dimensions are approximate INSTRUCTION MANUAL FCC Compliance Statement This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver ,
-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected t
-Consult the dealer or an experienced radio/television technician for additional suggestions Only equipment certified to comply with Class B should be attached to this equipment to continuing compliance with FCC emission limit, and must have shielded interface cables. You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. Using Documentation 1-0