FCC ID: 2ART4-SEK616833 Lightweight 2.4G Wireless Keyboard & Mouse Combos

Lightweight 2.4G Wireless Keyboard & Mouse Combos manual Features:

1. The keyboard and mouse share a USB receiver and both the keyboard and mouse have their own receiver storage compartment to prevent loss 2. 2.4G connection, 10 meters stable transmission distance 3. The bottom bracket design of the keyboard can adjust the angle of the keyboard for easy use 4. Low power consumption, automatically enter power saving mode when not in use 5. Mute mouse buttons Specification Description:

mouse:

1. Size: 9.8cmx5.8cmx3.7cm 2. Color: pink 3. Connection: 2.4G 4. Number of keys: 3 keys 5. Working voltage: 1.5V 6. Working current: 25mA 7. Working temperature and humidity: -2555/<85%RH 8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10 keyboard:

1. Size: 36.6cmx13.1cmx2.4cm 2. Color: pink 3. Connection: 2.4G 4. Number of keys: 100 keys 5. Working voltage: 1.5V 6. Working current: 8mA 7. Working temperature and humidity: -2555/<85%RH 8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10 Instructions:

Open the battery cover at the bottom of the keyboard, take out the receiver, insert the receiver into the USB port of the computer, put a AA battery (AA battery) into the battery slot, cover the keyboard battery cover, and then open the battery cover of the mouse to put a battery Insert AA batteries (AA batteries) into the battery slot and then cover the mouse battery cover to use. Precautions:

1. Do not expose the battery to humidity and high temperature, and avoid contact with conductive materials or liquids 2. Do not short circuit 3. Do not disassemble or attempt to repair this product by yourself. 4. If the product does not operate normally, please contact the after-sales department in time to obtain relevant services or maintenance storage method:

Power off storage, do not expose to humidity, high temperature environment Receiver information:

1. Current: 20mA 2. USB interface: Compatible with USB 1.1/2.0/3.0 3. Product size: 18.5*14.5*5.5mm FCC ID:2ART4-SEK616833 IC:27484-SEK616833 FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

1) L'appareil ne doit pas produire de brouillage;

2) L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet metteur ne doit pas tre colocalis ou fonctionner en conjonction avec une autre antenne ou un autre metteur. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Le matriel a t valu pour rpondre aux exigences gnrales dexposition aux radiofrquences.Le dispositif peut tre utilis dans des conditions d exposition portables illimites.

MINISO Corporation Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ART4-SEK616833 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(Block Diagram, Schematics, Operational Description) File Name

(Block Diagram.pdf, Schematics.pdf, Operational Description.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name Sincerely, Signature:

printed name: Cecily Zhang

MINISO Corporation Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: June 1, 2022 SUBJECT: FCC Application for (FCC ID: 2ART4-SEK616833) To Whom It May Concern:

We, the undersigned, hereby authorize Mina Xu at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Mina Xu at Centre Testing International Group Co., Ltd /

Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature:

printed name: Cecily Zhang M:\Master Documents\TEMPLATES\POA_Letter.doc

MINISO Corporation Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022-06-01 SUBJECT: FCC SDoC declaration for FCC ID: 2ART4-SEK616833 To Whom it may concern, We, as the grantee of this project, would like to declare that this device has been tested according to the FCC requirement and found compliant with the following standards: FCC Part 15 Subpart B. Product Name

: Lightweight 2.4G Wireless Keyboard & Mouse Combos Brand Name

: MINISO Model Name

: SEK616833 Testing Lab

: Centre Testing International Group Co., Ltd Sincerely, Signature: ________________________________ Company Name

: MINISO Corporation Name Job Title E-mail Tel.

: Cecily Zhang

: Digital QA

cecily@miniso.com 020-32306888-1427