Specifications Contents Thank you for purchasing the MINIX NGC-1. Overview Overview Overview Overview NGC-1 Intel Braswell Fanless Mini PC Windows 10 Edition Processor GPU System Memory Storage Operating System Connectivity Video Output Audio Output Peripheral Interface Power Quad Core Celeron N3150 Processor Intel HD Graphics 4GB DDR3L 128GB M2 SSD Windows 10 (64-bit) 802.11ac Dual Wi-Fi (2.4GHz/5.0GHz), Bluetooth 4.2 Mini DP + HDMI 1.4, up to 4K @30fps Via HDMI 1.4, 3.5mm stereo jack, optical SPDIF RJ-45 Gigabit Ethernet USB 3.0 port x 3, microphone & headphone jack (combined) Kensington lock ready DC 12V, 3A adapter included (CE, FCC certified) MINIX NGC-1 2 x Dual-Band Antenna NGC-1 Intel Braswell Fanless Mini PC is an ultra-compact mini desktop PC that packs an incredible amount of power, delivering optimal performance far beyond its small footprint. Combining 128GB of M2 SSD built-in storage, 4GB of DDR3L memory and Windows 10 ensures NGC-1 Intel Braswell Fanless Mini PC is ready to run out of the box. More hints, tips and useful information can be found on the official MINIX Forum: www.minixforum.com Multi-Language Setup Guide English/Deutsch/
Power Adapter
(12V, 3A) HDMI Cable Power Button USB 3.0 port1 12V DCIN SPDIF DC 12V Power-in jack Ethernet jack USB 3.0 port2 USB 3.0 port3 SPDIF HDMI port Mini DP port Headphone jack Power LED SPDIF 12V DCIN Power LED - The power LED glows blue when NGC-1 is on. Ethernet Jack - Connect the Ethernet cable for internet access. Power button - To power on NGC-1, press and hold the power button for 1-2 seconds until the power LED glows. To power off NGC-1, press and hold the power button for 8 seconds to force power off or closed down the system within the OS. DC 12V Power-in Jack - Connect the 12V power adapter supplied in the package to this port. NGC-1 requires less than 1A to operate, however the included power adapter provides 3A, in consideration that you may require extra to connect other power-drawing external devices such as an external hard drive. Micro SD card slot - Increase the storage size or read files directly from a Micro SD card, supports up to 256GB max. Earphone Jack - Connect to an external audio output device such as headphones etc... USB 3.0 Ports - Connect an external USB device to NGC-1, such as USB flash drive, receiver of wireless keyboard and mouse, USB wired mouse, receiver of wireless headset etc.. HDMI port - Connect NGC-1 to the HDMI port of a high-definition TV or PC monitor using an HDMI cable.. Control Basic Setup Different Control Methods - You may control devices:
1.) Wired mouse and keyboard set 2.) 2.4GHz USB wireless mouse and keyboard set NGC-1 with the following input NGC-1 connects to your TV or PC monitor through an HDMI port MINIX that delivers both audio and video. Before you setup NGC-1, look at the ports on the side/back of your TV or PC monitor to ensure you have the right cable:
- HDMI cable: You can connect NGC-1 to a HDTV or home theater receiver that has a HDMI port, using the HDMI cable for video and audio. Basic Setup What you need:
High-Definition TV or PC monitor - That can display 720p, 1080p or 4k video with at least one HDMI input. HDMI Cable - To connect NGC-1 to your TV or PC monitor (HDMI cable included). Step 1: Connecting the cable 1. Connect one end of the HDMI cable to the HDMI port of your TV or PC monitor. 2. Connect the other end of the cable to the HDMI port of NGC-1. Step 2: Connecting the power
- Connect the 12V power adapter supplied in the package to the relevant port. Press and hold the power button for 1-2 seconds to power on NGC-1, the blue power LED should then glow. Wireless Network - A wired network cable or an 802.11 a, b, g, or ac Wi-Fi wireless network (wireless video streaming requires 802.11n or ac), your wireless network name and password. n Step 3: Turn on your TV / PC monitor and select the input
- Simply turn on your TV or PC monitor and select the corresponding HDMI port connected to NGC-1. Vielen Dank fr Ihren Kauf des MINIX NGC-1. Bitte folgen Sie dieser Anleitung zur Einrichtung Ihres Gerts. Der NGC-1 ist ein ultrakompakter lfterlos Intel Braswell Mini Desktop PC mit einer Vielzahl an Mglichkeiten. Der NGC-1 definiert den Desktop PC neu - mit seinem Minute-Formfaktor ist er damit einer der weltweit kleinsten Desktop PCs. Mit 128 GB eingebautem M2 SSD Massenspeicher, 4 GB DDR3L Arbeitsspeicher und Windows 10 ist der NGC-1 Lfterlos Mini PC sofort einsatzbereit. Weitere Hinweise, Tipps und ntzliche Informationen finden Sie im offiziellen MINIX Forum: www.minixforum.com NGC-1 Benutzerhandbuch Bedienung Erste Schritte Diverse Mglichkeiten der Bedienung Sie knnen Ihren MINIX bedienen:
1.) USB Kabelmaus 2.) 2,4GHz USB Funktastatur- und -maus Set NGC-1 mit folgenden Eingabegerten NGC-1 wird ber den HDMI Port mit Ihrem HDMI-fhigen Einrichten des MINIX NGC-1 Der MINIX TV oder PC Monitor verbunden, wobei sowohl Bild als auch Ton mittels eines HDMI Kabels bertragen werden. Bevor Sie den MINIX NGC-1 einrichten, prfen Sie bitte die seitlichen/hinteren Anschlsse Ihres TV / PC Monitors, um sicher zu gehen, dass Sie das richtige Kabel haben:
Erste Schritte Was bentigt wird Um den MINIX NGC-1 zu benutzen, brauchen Sie Folgendes:
High Definition TV / PC Monitor Ein HD-fhiges TV Gert oder PC Monitor, welches 720p , 1080p or 4K Video wiedergeben kann mit einem freien HDMI Eingang. Kabel Ein HDMI Kabel, um den MINIX NGC-1 mit Ihrem TV zu verbinden. Netzwerk Ein Netzwerkkabel als Verbindung zu Ihrem Router oder ein 802.11 a, b, Wi-Fi Netzwerk (Wireless Video Streaming bentigt 802.11 n oder ac), den Namen und das Passwort Ihres WLANs. g, n oder ac
- HDMI Kabel: Sie knnen den MINIX NGC-1 damit mit einem HDTV Gert oder Home Theater Receiver mit HDMI Anschluss verbinden, das HDMI Kabel bertrgt sowohl Bild als auch Ton. Schritt 1: Verbinden der Kabel 1. Verbinden Sie ein Ende des HDMI Kabels mit dem HDMI Anschluss Ihres TV/PC Monitors. 2. Verbinden Sie das andere Ende des HDMI Kabels mit dem HDMI Anschluss des MINIX NGC-1. Schritt 2: Anschlieen der Stromquelle Verbinden Sie das mitgelieferte 12V Netzteil mit dem MINIX NGC-1. Drcken Sie fr 1-2 Sekunden den EIN/AUS Schalter, um den MINIX NGC-1 zu starten, bis die blaue Power LED leuchtet, . Schritt 3: Anschalten des TV / Monitors und Wahl des Eingangs Schalten Sie einfach Ihr TV Gert oder Ihren PC Monitor an und whlen Sie den entsprechenden HDMI Port aus, an dem Ihr MINIX NGC-1 angeschlossen ist. MINIX NGC-1. MINIX NGC-1 MINIX NGC-1
, MINIX NGC-1 128GB4GB DDR3LWindows 10 MINIX NGC-1 MINIX:www.minixforum.com NGC-1 MINIX NGC-1 :
1.) 2.) 2.4GHz USB MINIX NGC-1, :
/
,720p,1080p4K HDMI HDMIMINIX NGC-1 802.11 a, b, g,n ac Wi-Fi (802.11n or ac) MINIX NGC-1 HDMIMINIX NGC-1 MINIX NGC-1 /
-HDMI : HDMIMINIX NGC-1HDMI 1 1. HDMI/HDMI 2. MINIX NGC-1HDMI 2: 12V1-2 MINIX NGC-1 3/
HDMIMINIX NGC-1. Copyright 2016 MINIX Tech. All rights reserved. No part of this guide, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of MINIX. MINIX and the MINIX logo are trademarks of MINIX Technology Limited. All other marks and trademarks are properties of their respective owners. The content of this guide may differ in some details from the product or its software. All information in this documentation is subject to change without notice. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the users authority to operate the equipment under FCC rules. Verbinden Verbinden Verbinden Verbinden Power LED SPDIF 12V DCIN Power LED Die LED leuchtet bei eingeschaltetem MINIX NGC-1. EIN/AUS Schalter Um den MINIX NGC-1 einzuschalten, drcken Sie fr 1-2 Sekunden den EIN/AUS Schalter, bis die Power LED leuchtet. Um den MINIX NGC-1 auszuschalten, drcken Sie den EIN/AUS Schalter, bis Sie ber das Display aufgefordert werden, dies zu besttigen. Besttigen Sie dies nun ODER halten Sie den EIN/AUS Schalter fr 8 Sekunden gedrckt, um das Ausschalten zu erzwingen, bis die LED erlischt. Kopfhrer Anschluss Verbinden Sie ein externes Audiogert, z.B. Kopfhrer oder Lautsprecher. SD/MMC Karten Steckplatz Erweitern Sie den Speicherplatz oder greifen Sie auf Dateien auf einer SD/MMC Speicherkarte zu, untersttzt werden Karten bis max. 256GB. HDMI Anschluss Verbinden Sie den MINIX NGC-1 mit dem HDMI Port eines HD-fhigen TV Gerts oder Monitors mittels eines HDMI Kabels. USB 3.0 Ports Verbinden Sie externe USB Gerte mit dem MINIX NGC-1, wie USB-
Speichersticks, Empfnger fr kabellose Tastatur und Maus, USB Maus, Empfnger von kabellosen Kopfhrern, etc .. Eingang Netzteilkabel Verbinden Sie das im Lieferumfang enthaltene 12 V Netzteil mit diesem Eingang. Der MINIX NGC-1 bentigt selbst weniger als 1A, dennoch haben wir ein bis 3A ausgelegtes 12 Volt Netzteil beigefgt, um auch externe stromhungrige Gerte, wie z.B. Festplatten, mit gengend Power zu versorgen.. Ethernet Anschluss Alternativ zum Wi-Fi Anschluss knnen Sie diesen LAN Anschluss mit Ihrem Netzwerk per LAN-Kabel fr den Zugang zum Internet verbinden. MINIX NGC-1 Power LED MINIX NGC-1 1-2 OK 8 SPDIF 12V DCIN SD/MMC SD/MMC 256GB HDMI HDMI MINIX NGC-1 HDMI USB 3.0 USBUSBUSB MINIX NGC-1. DC 12V 12 VMINIX NGC-1 1A, 12V 3A 12V DCIN SPDIF Ein/AUS Schalter USB 3.0 port1 Eingang Netzteilkabel 12V Ethernet Anschluss USB 3.0 port2 USB 3.0 port3 SPDIF HDMI Anschluss Mini DP port Kopfhrer Anschluss Copyright 2016 MINIX Tech. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs, einschlielich der darin beschriebenen Produkte und Software, darf in irgendeiner Form oder mit irgendwelchen Mitteln vervielfltigt, bertragen, berschrieben, in einem Daten- abfragesystem gespeichert oder in irgendeine Sprache bersetzt werden, ohne die ausdrckliche schriftliche Genehmigung von Minix, auer durch den Kufer zum Zweck der Datensicherung. MINIX und das MINIX Logo sind Warenzeichen von MINIX Tech. Alle anderen Marken- und Warenzeichen sind Eigentum ihrer jeweiligen Inhaber. Der Inhalt dieser Anleitung kann sich in einigen Details von dem Produkt oder seiner Software unterscheiden. Alle Informationen in diesem Dokument knnen sich ohne vorherige Ankndigung ndern. USB3.01 USB3.02 USB3.03 12V DCIN SPDIF DC12V SPDIF HDMI Mini DP 2016 MINIX. MINIX MINIX MINIXMINIX
, This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.