all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Part 1 | Users Manual | 3.68 MiB | December 02 2007 | |||
1 2 |
|
Part 2 | Users Manual | 3.55 MiB | December 02 2007 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Operational Description | December 02 2007 | ||||||
1 2 | Cover Letter(s) | December 02 2007 | ||||||
1 2 | External Photos | December 02 2007 | ||||||
1 2 | Internal Photos | December 02 2007 | ||||||
1 2 | ID Label/Location Info | December 02 2007 | ||||||
1 2 | Test Setup Photos | December 02 2007 |
1 2 | Part 1 | Users Manual | 3.68 MiB | December 02 2007 |
Magellan Maestro Reference Manual Instructions for Operating the Magellan Maestro 4000/4040/4050 IMPORTANT SAFETY WARNINGS The Magellan Maestro 4000/4040/4050 is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When using the Magellan Maestro 4000/4040/4050, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others:
x California law prohibits mounting any item to your windshield. Please check with your state or local law enforcement for applicable regulations regarding windshield mounting. Go to www.magellanGPS.com for alternate mounting solutions. x When driving, the need to view the display is minimal. Voice prompts will guide you to your destination. The driver should enter data or program the Magellan Maestro 4000/4040/4050 only when the vehicle is stopped. Only a vehicle passenger should enter data or program the Magellan Maestro 4000/4040/4050 while the vehicle is moving. It is your responsibility to comply with all traffic laws. x x Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and business and service locations may change over time. The database does not include, analyze, process, consider, or reflect any of the following:
legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions); road slope or grade; bridge height, width, weight, or other limits; population density; neighborhood quality or safety; availability or proximity of law enforcement, emergency rescue, medical, or other assistance; construction work zones or hazards; road or lane closures; road, traffic, or traffic facilities safety or condition; weather conditions; pavement characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe, hazardous, or illegal route suggestions. x Keep the Magellan Maestro 4000/4040/4050 safe from extreme temperature conditions. For example, do not leave it exposed to direct sunlight for an extended period of time. x Take care when mounting the Magellan Maestro 4000/4040/4050 in your vehicle, whether using the windshield mount or other mount or accessories, that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's safety devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan Maestro 4000/4040/4050 be dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result of your choices in mounting the Magellan Maestro 4000/4040/4050. x Laws in some states prohibit wearing stereo headphones while operating a motor vehicle. Please contact your states Department of Motor Vehicles for information. x The battery in the Magellan Maestro 4000/4040/4050 is rechargeable and should not be removed. In the event it should need to be replaced, please contact Magellan Technical Support. x Extreme temperatures may cause the Magellan Maestro 4000/4040/4050 to stop working. Do not leave it exposed to extreme heat or cold for long periods of time. About Charging the Magellan Maestro 4000/4040/4050 x Use only the AC adapter (Phihong: PSC11R-050) approved for your Magellan Maestro 4000/4040/4050. Use of another type of AC adapter will result in malfunction and/or danger. x Use only the car charger approved for / supplied with your Magellan Maestro 4000/4040/4050. Use of another type of car charger will result in malfunction and/or danger. x The Magellan Maestro 4000/4040/4050 is intended to be supplied with a LISTED Power Unit marked with "LPS", "Limited Power Source" and output rated + 5 V dc / 2.0 A". x Use the USB cable approved for / supplied with your Magellan Maestro 4000/4040/4050. x Use the battery provided with your Magellan Maestro 4000/4040/4050 or its identical replacement approved for the Magellan Maestro 4000/4040/4050 x For safety reasons, the battery in your Magellan Maestro 4000/4040/4050 will stop charging when the ambient temperature is less than 32F (0C) or more than 113F (45C) IMPORTANT SAFETY WARNINGS About the AC Adapter x Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet. x Allow adequate ventilation around the adapter when using it to operate the device or charging the battery. Do not cover the AC adapter with paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. x Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging. x Do not use the adapter if the cord becomes damaged. x Do not attempt to service the Magellan Maestro 4000/4040/4050. There are no serviceable parts inside. Replace the Magellan Maestro 4000/4040/4050 if it is damaged or exposed to excess moisture. About the Battery x Do not attempt to replace the battery. Please contact Magellan Technical Support for issues related to the battery. x Use the charger approved for your Magellan Maestro 4000/4040/4050. IMPORTANT INSTRUCTIONS FOR SERVICE PERSONNEL ONLY:
x Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruccions. x Replace only with the same or equivalent type recommended by Magellan. x The battery must be recycled or disposed of properly. x Use the battery only in the specified equipment. INSTRUCTION TO THE USER:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
x Reorient or relocate the receiving antenna. x Increase the separation between the equipment and receiver. x Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. x Consult the dealer or an experienced radio/TV technician for help. IMPORTANT SAFETY WARNINGS Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. IMPORTANT SAFETY WARNINGS IC statement Operation is subject to the following two conditions:
1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2006 Thales Navigation, Inc. All rights reserved. The Magellan Logo, Magellan, Magellan Maestro 4000/4040/4050, Turn it on and go, TrueView, QuickSpell, SmartDetour, and SmartVolume are trademarks of Thales. No part of this user manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the purchasers personal use, without the prior written permission of Thales. 63136101 A TABLE OF CONTENTS
........................................................................................................................... ....................................Magellan Maestro 1 Instructions for Operating the Magellan Maestro 4000/4040/4050 ............................................................................................... .............................................................1 About Charging the Magellan Maestro 4000/4040/4050 ............................................................................................... .................................................................. 1 IMPORTANT SAFETY WARNINGS .................................................................................................... ..................................................1 About the AC Adapter ............................................................................................................. ............................................................................................ 2 About the Battery .............................................................................................................. ................................................................................................. 2 Important instructions for service personnel only: ................................................................................................................. ........................................ 2 INSTRUCTION TO THE USER:............................................................................................................... ............................................................................ 2 Federal Communication Commission Interference Statement .......................................................................................................... .................................. 3 IC statement .......................................................................................................... ............................................................................................................ 4 TABLE OF CONTENTS ..................................................................................................... ..................................................................i Chapter 1: Contact Information ...................................................................................................... ...............................................1 Technical Support ............................................................................................................. ................................................................................................ 1 Warranty Service .............................................................................................................. ................................................................................................. 1 Customer Service .............................................................................................................. ................................................................................................. 1 Registration ...................................................................................................... ................................................................................................................. 1 Chapter 2: GPS Information ...................................................................................................... .....................................................2 About Satellite Navigation ........................................................................................................ ......................................................................................... 2 How Satellite Navigation Works ............................................................................................................... .......................................................................... 2 Line of Sight ................................................................................................................. ................................................................................................. 2 A Word on the Safe Usage of GPS Maps ................................................................................................................. ............................................................ 3 From Source to Destination........................................................................................................ .................................................................................... 3 Placement of Your GPS Receiver for Optimal Satellite Reception ......................................................................................................... .............................. 3 Signal Acquisition Time ................................................................................................................. .................................................................................... 3 GPS Maps and Your Safety ............................................................................................................... .................................................................................. 4 Chapter 3: Magellan Maestro 4000/4040/4050 ............................................................................................... ...........................................5 Front View ................................................................................................................. ......................................................................................................... 5 Rear View ................................................................................................................. .......................................................................................................... 6 Top View ................................................................................................................. ........................................................................................................... 6 Bottom View ................................................................................................................. ...................................................................................................... 7 Right Side View ................................................................................................................. ................................................................................................. 7 Left Side View ................................................................................................................. ................................................................................................... 8 Car Holder .............................................................................................................. ............................................................................................................ 8 Using Removable Memory Cards ................................................................................................................ ........................................................................ 9 To Insert the Storage Card: ................................................................................................................. ........................................................................... 9 To Remove the Storage card: .................................................................................................................. ....................................................................... 9 Chapter 4: Vehicle Installation ........................................................................................................ ............................................10 Installing the Windshield Mount ............................................................................................................... ....................................................................... 10 Chapter 5: Navigation Basic Operation .......................................................................................................... .............................12 Turning the Magellan Maestro 4000/4040/4050 On Out of the Box ................................................................................................................... ............................ 12 Power Off versus Sleep Mode................................................................................................................. ................................................................... 12 Power Management ..................................................................................................... ................................................................................................ 12 Resetting the Magellan Maestro 4000/4040/4050 ............................................................................................... ......................................................................... 12 Adjusting the Volume ............................................................................................................. .......................................................................................... 12 Repeating the Last Command ......................................................................................................... ................................................................................ 12 Making Selections ......................................................................................................... ................................................................................................... 13 Inputting Text Characters ........................................................................................................ ........................................................................................ 13 Additional Characters (More Button) ............................................................................................................. ............................................................... 13 Numerical Characters (123 Button) ............................................................................................................. ................................................................ 14 What Is QuickSpell? ...................................................................................................... ................................................................................................... 14 Help with Address Entry ................................................................................................................. .................................................................................. 15 Chapter 6:
Traveling .......................................................................................................... ..........................................................16 TABLE OF CONTENTS Guidance Information Screens ............................................................................................................. ............................................................................ 16 Map Screen ............................................................................................................... ....................................................................................................... 17 Changing from 2D to 3D Map View ................................................................................................................. ................................................................. 17 Changing the Map Zoom Levels ............................................................................................................... ........................................................................ 18 Maneuver List Screen ............................................................................................................... ........................................................................................ 18 TrueView Screen ............................................................................................................... ................................................................................................ 19 Choosing the Route Method ............................................................................................................. ................................................................................ 20 Changing the Route Method ............................................................................................................. ............................................................................... 20 Cancelling a Planned Route ................................................................................................................ ............................................................................. 20 Detouring from the Planned Route ................................................................................................................ ................................................................... 21 Excluding a Maneuver in the Planned Route ................................................................................................................ .................................................... 21 Displaying Information About Your Present Location ........................................................................................................... ............................................ 22 Saving Your Current Location to Your Address Book ................................................................................................................. ....................................... 22 Finding POIs Along Your Route ................................................................................................................ ......................................................................... 22 Finding a Detour Along Your Route ................................................................................................................ .................................................................. 23 Chapter 7: Selecting Destinations ...................................................................................................... .........................................25 Destination Screen ............................................................................................................... ............................................................................................ 25 Country Selection (Globe Button) ............................................................................................................. ........................................................................ 25 Entering and Routing to Your Home Address ............................................................................................................ ....................................................... 25 Selecting a Destination Using Select Address ............................................................................................................ ...................................................... 26 Search By City.................................................................................................................... .......................................................................................... 27 Search by Zip Code ................................................................................................................. ..................................................................................... 27 Search By State .................................................................................................................. ......................................................................................... 28 Previous City.................................................................................................................... ............................................................................................ 29 Selecting a Destination Using the Address Book ................................................................................................................. ............................................. 30 Previous Destinations ...................................................................................................... ............................................................................................ 30 Saving a Previous Destination to the Address Book ................................................................................................................. .................................. 31 Deleting A Previous Destination ....................................................................................................... ......................................................................... 32 Favorites............................................................................................................ .......................................................................................................... 32 Editing a Favorite ............................................................................................................ .......................................................................................... 33 Deleting A Favorite ............................................................................................................ ........................................................................................ 33 List Addresses ......................................................................................................... .................................................................................................... 34 Editing an Address ............................................................................................................ ........................................................................................ 34 Deleting an Address ............................................................................................................ ...................................................................................... 35 Create New Entry ................................................................................................................. ........................................................................................ 35 Search by City ................................................................................................................... ........................................................................................ 35 Search by Zip Code ................................................................................................................. ................................................................................... 36 Search by State .................................................................................................................. ....................................................................................... 37 Previous City ................................................................................................................... .......................................................................................... 38 Trip Planner ............................................................................................................. .................................................................................................... 39 New .................................................................................................................. ......................................................................................................... 39 Optimizing a Trip ................................................................................................................... .................................................................................... 41 Guide Me .................................................................................................................... ............................................................................................... 42 Edit ................................................................................................................... ........................................................................................................ 42 Delete and Rename ............................................................................................................ ....................................................................................... 43 Selecting a Point of Interest as a Destination ....................................................................................................... ........................................................... 45 Spell Name ................................................................................................................ .................................................................................................. 46 Nearest ............................................................................................................. ......................................................................................................... 46 List By City ................................................................................................................... ............................................................................................. 46 Select Category ........................................................................................................... .............................................................................................. 47 Select Category............................................................................................................ ................................................................................................ 47 Nearest ............................................................................................................. ......................................................................................................... 48 List by City ................................................................................................................... ............................................................................................. 48 Spell Name ................................................................................................................ ................................................................................................ 48 Cuisine Type ................................................................................................................. ............................................................................................. 49 TABLE OF CONTENTS Custom POIs .................................................................................................................. .............................................................................................. 49 Selecting an Intersection as a Destination ....................................................................................................... ............................................................... 51 Search by City.................................................................................................................... .......................................................................................... 51 Search by Zip Code ................................................................................................................. ..................................................................................... 52 Search by State................................................................................................................... ......................................................................................... 52 Previous City.................................................................................................................... ............................................................................................ 53 Chapter 8: Navigation Options ............................................................................................................. .......................................55 Configuration ................................................................................................... ................................................................................................................ 55 POI Selection............................................................................................................ .................................................................................................... 55 Custom POIs .................................................................................................................. .............................................................................................. 55 Map Options ............................................................................................................. ................................................................................................... 60 TrueView Options ............................................................................................................. ............................................................................................ 60 Select Map Color................................................................................................................. ......................................................................................... 60 Route Preferences........................................................................................................ ................................................................................................ 61 Detour Options.............................................................................................................. ............................................................................................... 62 Menu Colors................................................................................................................ ................................................................................................. 63 Tone Options.............................................................................................................. .................................................................................................. 63 GPS Options.............................................................................................................. ................................................................................................... 63 GPS Status ................................................................................................................ ................................................................................................ 63 Set GPS Position ............................................................................................................ ............................................................................................ 64 Simulator Mode................................................................................................................. ........................................................................................... 64 Automatic Volume.............................................................................................................. .......................................................................................... 65 Backup and Restore.............................................................................................................. ....................................................................................... 65 Backup ............................................................................................................. ......................................................................................................... 65 Restore ............................................................................................................. ......................................................................................................... 65 Map Information ...................................................................................................... .................................................................................................... 66 Trip Computer .......................................................................................................... ........................................................................................................ 66 Current Trip ................................................................................................................... .............................................................................................. 66 Stopping or Starting the Trip Computer .......................................................................................................... ........................................................... 67 Saving the Current Trip Report ............................................................................................................... ................................................................... 67 Resetting the Trip Computer .......................................................................................................... ........................................................................... 68 Viewing a Saved Trip Report ............................................................................................................... ....................................................................... 68 Deleting a Trip Report ............................................................................................................... ................................................................................ 68 Chapter 9:
Bluetooth .......................................................................................................... .........................................................70 How to use the Dialer ................................................................................................................ ....................................................................................... 70 Introduction ...................................................................................................... ........................................................................................................... 70 Main Interface ........................................................................................................... .................................................................................................. 70 Pair Mode ................................................................................................................ .................................................................................................... 70 The pairing window shall pop up, if it is not the first time of use, you need to click in the main interface. ............................................................. 70 Make paring process on your mobile phone. (See the user guide of your mobile phone.) ............................................................................................ 71 After you input the passkey in your mobile phone, there shall be a passkey input window pop up in your Magellan Maestro. Then you need to input the same numbers as you input to your mobile phone to this pop up window. ........................................................................................................... ......... 71 Establish Connection........................................................................................................ ........................................................................................... 71 Connect ............................................................................................................ ......................................................................................................... 71 The other way to connect ............................................................................................................. .............................................................................. 72 Place a call..................................................................................................................... ............................................................................................. 75 Place a call via Keypads ............................................................................................................ ................................................................................ 76 Place a call via Contacts ............................................................................................................ ............................................................................... 76 Place a call via Call History .............................................................................................................. ......................................................................... 77 Place a call via Redial ............................................................................................................... ................................................................................ 78 Dial Fail ................................................................................................................... .................................................................................................. 79 Dial Success ............................................................................................................. ................................................................................................. 80 Incoming call..................................................................................................................... .......................................................................................... 81 Exit ................................................................................................................... .......................................................................................................... 83 How to Transfer files via Bluetooth wireless technology ........................................................................................................ ........................................... 84 TABLE OF CONTENTS Tap to enter Bluetooth Manager window. ........................................................................................................... .................................................... 84 There are two ways (4.2.1 and 4.2.2) to connect to the Bluetooth File Transfer service of a remote device: ............................................................. 85 Tap in the Bluetooth Manager window (Figure 4~2), the Passkey Request window shall pop up as Figure 4~4. .............................................. 85 Input the passkey you set that is not more than 16 digital numbers, and then the Remote Device window shall pop up as below:.......................... 86 How to use My Shortcuts .......................................................................................................... ........................................................................................ 88 Tap in the main interface (Figure 5~1) to enter Bluetooth Manager window. ......................................................................................................... 89 Tap My Shortcuts to explore the shortcut stored in My Shortcuts. ....................................................................................................... ................. 89 How to use Active Connections ...................................................................................................... .................................................................................. 91 Tap in the main interface (Figure 6~1) to enter Bluetooth Manager window. ......................................................................................................... 92 Tap in the main interface (Figure 6~1) to enter Active Connections window. ......................................................................................................... 92 Choose a active connection, the shall display (Figure 6~4), and then you can tap this button to disconnect the active connection. ...................... 92 How to use Bluetooth Settings ............................................................................................................. ............................................................................ 93 Tap in the main interface (Figure 7~1) to enter Bluetooth Manager window. ......................................................................................................... 93 Tap to enter Bluetooth Settings window as below: ............................................................................................................... ................................... 94 Tap the name area, the Device Name change window shall pop up as below: ......................................................................................................... 94 Input the new device name you want to change to, and tap to verify or tap to cancel. .............................................................................................. 95 Tap in the Bluetooth Settings (Figure 7~3) to set the share folder you want to use in Bluetooth file transfer. ....................................................... 95 The default share folder is My Flash Disk. If you have inserted a memory card to your Magellan Maestro, there shall be a Storage Card directory in the directory list. Select the folder you want to use in the Bluetooth file transfer, and tap the Select button to set the share folder or tap the Cancel button to cancel the share folder change. ............................................................................................................ ............................................................. 95 After setting the share folder, it shall back to Bluetooth Setting window
(Figure 7~3), tap to save your settings and go back to Bluetooth Manager window (Figure 7~2)................................................................................................................... ......................................................................................... 96 How to Exit ................................................................................................................... .................................................................................................... 96 Tap to power off the Bluetooth and go back the main interface............................................................................................................. ..................... 96 Tap to exit the main interface and go back to the Settings window. ........................................................................................................... ........... 97 Chapter 10: System Settings ............................................................................................................. ..........................................98 Brightness ........................................................................................................ ............................................................................................................... 98 Power Management ..................................................................................................... .................................................................................................... 98 Password .......................................................................................................... ............................................................................................................... 98 Set Password .......................................................................................................... ..................................................................................................... 98 Change Password .......................................................................................................... .............................................................................................. 99 Delete Password .......................................................................................................... ................................................................................................ 99 Language .......................................................................................................... ............................................................................................................... 99 Chapter 11: System Status ................................................................................................................ ........................................100 Product Information ...................................................................................................... ................................................................................................. 100 User Storage ............................................................................................................. ..................................................................................................... 100 Diagnostics ....................................................................................................... ............................................................................................................. 100 Audio Test.................................................................................................................... .............................................................................................. 100 Touchscreen Test ................................................................................................................... .................................................................................... 100 Keypad Test ................................................................................................................... ............................................................................................ 100 Video Test ................................................................................................................... ............................................................................................... 100 Contact Us ..................................................................................................................... ................................................................................................ 101 Chapter 12: Magellan Maestro Tools Installation ........................................................................................................ ...........102 Installing the Software ........................................................................................................... ....................................................................................... 102 Chapter 13: Magellan Maestro Music Manager ........................................................................................................... ...........103 Chapter 14: Music Player ............................................................................................................... ............................................104 Single Song Play .................................................................................................................. .......................................................................................... 104 Multiple Song Play .................................................................................................................. ....................................................................................... 104 Play................................................................................................................... ......................................................................................................... 105 Create................................................................................................................ ........................................................................................................ 105 Modify............................................................................................................... ......................................................................................................... 105 Delete ............................................................................................................... ......................................................................................................... 105 Rename ............................................................................................................ ......................................................................................................... 106 Play Mode ................................................................................................................ ...................................................................................................... 106 TABLE OF CONTENTS List Songs ................................................................................................................ ...................................................................................................... 106 Equalizer .......................................................................................................... .............................................................................................................. 107 Help .................................................................................................................. ............................................................................................................. 107 Chapter 15: Magellan Maestro Photo Manager ........................................................................................................... ............108 Chapter 16: Photo Viewer .............................................................................................................. ............................................109 View Single Photo ................................................................................................................ .......................................................................................... 109 Previous Image (left arrow) ............................................................................................................... ........................................................................ 109 Zoom ................................................................................................................ ......................................................................................................... 109 Slideshow ......................................................................................................... ........................................................................................................ 110 Pan .................................................................................................................... ....................................................................................................... 110 Rotate Image ................................................................................................................ ............................................................................................ 110 Next Image (right arrow) ............................................................................................................... ............................................................................ 110 ESC .................................................................................................................. ......................................................................................................... 110 Manage Photos ............................................................................................................... ............................................................................................... 110 List View ................................................................................................................. ................................................................................................... 110 Thumbnail ........................................................................................................ ......................................................................................................... 110 Rename ............................................................................................................ ......................................................................................................... 110 Properties ......................................................................................................... ......................................................................................................... 111 Tools ................................................................................................................ .............................................................................................................. 111 Preferences........................................................................................................ ........................................................................................................ 111 Delete Files .................................................................................................................. .............................................................................................. 111 About ................................................................................................................ ......................................................................................................... 111 Chapter 17: Magellan Maestro POI Manager ........................................................................................................... ...............112 Latitude ............................................................................................................ ............................................................................................................. 112 Longitude ......................................................................................................... .............................................................................................................. 112 Altitude ............................................................................................................ .............................................................................................................. 113 Opening a POI File ................................................................................................................... ...................................................................................... 113 Creating a New POI FIle ................................................................................................................... .............................................................................. 114 Adding Individual POIs ................................................................................................................ ................................................................................. 114 Importing a Data FIle ................................................................................................................... .................................................................................. 116 Appendix .......................................................................................................... ..........................................................................117 POI Categories ........................................................................................................ ....................................................................................................... 117 Specifications ................................................................................................... ............................................................................................................. 119 PC Requirements ................................................................................................... ........................................................................................................ 119 GPS Status Screen ............................................................................................................... .......................................................................................... 120 GPS STATUS Screen Structure-first page .................................................................................................................. ............................................... 120 Bad fix code .................................................................................................................. .......................................................................................... 120 GPS STATUS Screen Structure - second page .................................................................................................................. ........................................ 121 Typical GPS STATUS Screen Display ............................................................................................................. ............................................................ 122 Frequently Asked Questions .......................................................................................................... ................................................................................. 123 Chapter 1: Contact Information If you need support for your Magellan Maestro 4000/4040/4050 and you wish to contact Thales, please use the following information to direct your questions/comments to the proper person. 1.1 Technical Support If you need technical assistance or how-to help, or if you have a technical question about the functionality of your Magellan product, please contact us on the Internet at www.magellangps.com or reach us by fax or by phone. Our Technical Support phone representatives are available Monday through Friday, 6:00 a.m. to 5:00 p.m. PST/PDT. After hours, you may leave a detailed voice mail message that will be returned within the next business day. Telephone: (866) 868-2259 or (909) 394-5000 (outside the United States) You may also reach Technical Support by Fax: (909) 494-7777 [Attn: Tech. Support]; or E-Mail: magellansupport@thalesnavigation.com 1.2 Warranty Service To obtain warranty service on your Magellan Maestro 4000/4040/4050, you must contact us for a return authorization (RA) before you ship the product. Packages arriving at our dock without an RA will be refused. To obtain an RA, simply contact our Technical Support group at: Telephone:
(866) 868-2259 or (909) 394-5000 (outside the United States); Fax: (909) 394-7050 [Attn: Tech. Support]; or E-Mail:
magellansupport@thalesnavigation.com 1.3 Customer Service If you need to order accessories or obtain unlock codes, you can call our Customer Service Department Monday through Friday, 6:00 a.m. to 5:00 p.m. PST/PDT, or visit our Web site at www.magellangps.com. Telephone: (866) 339-0488 or (909) 394-5000 (outside the United States);
Fax: (909) 394-7078. 1.4 Registration Please make sure to register your Magellan Maestro 4000/4040/4050 at www.magellangps.com. By registering, you will be informed of the latest product updates. Chapter 2: GPS Information 2.1 About Satellite Navigation Global satellite navigation is an exciting technology, providing enhanced productivity and accuracy in a vast number of industries. It adds a new level of enjoyment and safety to a wide range of navigation, sports, and recreational activities. A Global Navigation Satellite System (GNSS) is a network of satellites that transmit high-frequency radio signals containing time and distance data that can be picked up by a receiver, allowing users to pinpoint their precise locations anywhere around the globe. There are two Global Navigation Satellite Systems in operation: the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). These systems are constantly being upgraded to meet higher standards of reliability. A third GNSS named GALILEO, after the Italian astronomer of the early 1600s, is being developed in Europe specifically to provide a higher standard of integrity and reliability, required to ensure the safety of lives during transport by air, land and sea, without the use of additional augmentation systems. While the GPS and GLONASS satellite networks are being developed to achieve maximum performance, Satellite-Based Augmentation Systems
(SBAS) have been established to provide improved accuracy. SBAS provides differential signal corrections for GPS and GLONASS transmissions with the use of ground stations and geostationary satellites in specific regions. This is GNSS-1, the first phase in establishing the required integrity for high-precision satellite navigation. GNSS-2 requires the launching of new satellites into orbit and a complete upgrade of the existing satellite systems. This second phase is already well underway. GALILEO, scheduled to begin service in 2008, is being developed to meet the standards of GNSS-2 for rapid and reliable, certified precision positioning. 2.2 How Satellite Navigation Works Global navigation satellites continuously transmit time and distance information as they orbit Earth in a precise formation. Navigation satellite receivers use this information to calculate an exact location through triangulation. Every point on Earth is identified by two sets of numbers called coordinates. These coordinates represent the exact point where a horizontal line, known as latitude, crosses a vertical line, known as longitude. The receiver locks on to at least three satellites and uses the information received to determine the coordinates of the receiving device. By comparing the time the signals were transmitted from the satellites and the time they were recorded, the receiver calculates how far away each satellite is. The distance of the receiver from three or more satellites reveals its position on the surface of the planet. With these distance measurements, the receiver might also calculate speed, bearing, trip time, distance to destination, altitude, and more. The satellite-navigation device may display its position as longitude/latitude, Universal Transverse Mercator (UTM), Military Grid (MG), or simply as a point on an electronic map. Many Thales Navigation receivers provide comprehensive mapping data, making satellite navigation an easy tool to enhance your recreational and industrial activities. 2.2.1 Line of Sight Satellite-navigation receivers operate by line of sight with global-
positioning satellites. This means that at least three satellites must be in view of a receiver in order to calculate longitude and latitude. A fourth satellite must also be within line of sight to calculate altitude. On average, eight satellites are continuously within line of sight of every position on Earth; the more satellites in view, the more accurate the positioning. Though the radio signals of navigation satellites will pass through clouds, glass, plastic, and other lightweight materials, satellite-navigation receivers will not work underground or in other enclosed spaces. Chapter 2: GPS Information 2.3 A Word on the Safe Usage of GPS Maps Just like paper maps, maps on GPS devices vary greatly in terms of information included and visual presentation. Whether topographical maps, roadmaps or marine charts, each map and the data it presents is designed for a specific purpose. For example, marine charts will often present only a minimal representation of roadways and are not a substitute for street maps. Topographic maps usually provide minimal detail about bodies of water and do not contain marine navigational markers. Maps also vary widely in scale: the smaller the scale, the more detailed the map. Therefore, when using GPS maps (just as with paper maps) it is important to consider what type of map you are using in your explorations and to use common sense. 2.3.1 From Source to Destination Thales Navigation, maker of Magellan GPS products, is not a cartography company. We do not create the maps that are used on our GPS devices. We seek to acquire map data from the best public and private sources available at the time of publication. Thales Navigation licenses* topographical maps, roadmaps, marine charts and points of interest (POI) data from commercial and governmental cartographic sources that provide raw map data. Thales Navigation processes and compresses the raw data into a format that makes it presentable and manageable to work on our GPS devices. And to ensure that our map data is as robust as possible, data from multiple sources are often combined to provide a better user experience for our customers. This processing does not alter the landforms, coordinates or other spatial data that comes in the raw data. The accuracy of the maps is fundamentally dependent on the source data used to create them. Map data changes frequently due to both natural and man-made causes. As a result, governmental and commercial cartography companies must continuously review, correct, and improve upon their map data. We release new versions of our maps on a regular basis to reflect these changes. After processing the data, we test the compatibility of the map with our GPS devices to ensure that the products we release work properly on our GPS devices. We also beta-test our products to get customer feedback prior to release. 2.4 Placement of Your GPS Receiver for Optimal Satellite Reception FIrstly, before considering signal reception, it is important to understand that your GPS receiver is a sensitive piece of equipment. You should never place it in an area of your vehicle where it may be struck by other items, or where vibration may cause it to strike other items or parts of the vehicle. The windshield mount included in the box allows you to place the receiver in such a way that the antenna can receive the satellite signal through the windshield without being obstructed by other parts of the vehicle. However, tinted windows or other reflective coatings may interfere with reception. In this case, it may be required to attach an external antenna (optional). An external antenna provides faster satellite fix times and greater signal strength. Because it is mounted outside of the vehicle, it is not affected by reflective coatings on windows and has an unobstructed line of sight to the satellites. Other mounting solutions are available but may require an external antenna. External conditions also affect GPS signal reception. Although weather conditions do not affect the signal, tall buildings and trees, driving through canyons, wooded areas, or tunnels, and sitting in a garage or covered parking area will affect the GPS signal. The GPS receiver constantly monitors and updated the GPS signal status and will reacquire the signal once it is clear of any obstructions. 2.5 Signal Acquisition Time The first time you use your Magellan Maestro 4000/4040/4050, or if you travel over 500 miles with it off, there may be a delay in receiving the initial satellite fix; depending on your position and the position of the satellites, this could take 15 minutes or more. Normal usage will receive the satellite fix much faster, but still may take several minutes. It is important to have your antenna rotated upward and an unobstructed view of the sky to receive the best possible satellite signal. Chapter 2: GPS Information 2.6 GPS Maps and Your Safety Remember, your GPS device is an aid to navigation. It must be used with common sense, and it is important that users interpret GPS map data with a critical eye. Landscapes and roads change or may be impassable, trees and tall buildings can obscure GPS signals, and your GPS device may not always reflect the complete picture. When using GPS, you must combine the information provided by your GPS map with your relevant local knowledge, road signage, buoys, depth soundings and changing local conditions to generate a complete understanding of your situation. It is your responsibility to ensure compliance to all traffic laws, including pedestrian observance of crosswalks, and to use good judgment while operating the Magellan GPS receiver. Safety must be your primary concern. The Magellan GPS receiver must not be used while engaged in any activity requiring the user's full attention to the environment. For instance, the Magellan Maestro 4000/4040/4050 GPS receiver should be operated only by vehicle passengers or by the driver when the vehicle has come to a complete stop. The driver must not attempt to view the display while driving. Disregard any unsafe, hazardous or illegal route suggestions. Magellan maps do not include, analyze, process, consider or reflect any of the following: legal restrictions (such as weight, height, width, load and speed restrictions); road slope or grade; bridge height, width, weight or other limits; population density; neighborhood quality or safety; availability or proximity of law enforcement, emergency rescue, medical or other assistance; construction work zones or hazards; road, sidewalk, or waterway closures or conditions; weather conditions; pavement characteristics or conditions; special events; traffic congestion; time of day.
*Thales Navigation licenses map data from governmental sources such as, but not limited to, U.S. Geological Survey (USGS), the National Oceanic and Atmospheric Administration (NOAA-NOS) and the Canadian Hydrographic Service (CHS). Thales Navigation also licenses map data from commercial cartography companies such as Navigation Technologies, Navionics, DMTI and C-Map. Chapter 4: Vehicle Installation Take care when mounting the Magellan Maestro 4000/4040/4050 in your vehicle, whether using the windshield mount or other mount, that it does not obstruct the drivers view of the road. Make sure that the placement of the Magellan Maestro 4000/4040/4050 and cable does not interfere with the operation of vehicle safety devices, such as air bags. You assume the risks associated with damage to your vehicle or vehicles occupants as a result of how you choose to mount the Magellan Maestro 4000/4040/4050. 4.1 Installing the Windshield Mount Attach the car holder to the back of the Magellan Maestro 4000/4040/4050. Insert the bottom of the Magellan Maestro 4000/4040/4050 first then snap the car holder clip at the top into place. Slide the windshield mount onto the back of the car holder. Press the windshield mount to the glass and slide the locking lever toward the glass. Plug the power cable into the Magellan Maestro 4000/4040/4050 as shown.This step is optional but ensures the battery remains charged. Chapter 4: Vehicle Installation Plug the power adapter into your vehicles cigarette lighter or 12 volt receptacle. Installation is complete, and you are ready to turn the Magellan Maestro 4000/4040/4050 on and go. Chapter 5:
Navigation Basic Operation 5.1 Turning the Magellan Maestro 4000/4040/4050 On Out of the Box Press the power button for approximately ten seconds (see Front View on page 5). If power is connected properly or if the battery is charged sufficiently, the Magellan screen will appear followed by the Warning screen. To comply with the warnings, press OK. Next, the Quick Tips screen will appear. It is recommended to view the Quick Tips to better familiarize yourself with the functionality of the Magellan Maestro 4000/4040/4050. Otherwise, select ESC to skip viewing the Quick Tips at this time. By default, the navigation application will launch and the Destination screen will appear. 5.1.1 Power Off versus Sleep Mode The Magellan Maestro 4000/4040/4050 can be put into sleep mode. This mode is a limited power mode that saves battery power. When waking up from sleep mode, the time to acquire a sattelite fix is significantly shorter than when the Magellan Maestro 4000/4040/4050 is powered up after being completely turned off. To enable sleep mode, press and hold the Power button for 2-3 seconds. The display will shut off and the power indicator light will be on dimly. To power off completely, press and hold the Power button for 10 seconds. The Magellan Maestro will be fully shut off. To power up the Magellan Maestro 4000/4040/4050 from sleep mode, press and hold the power button for 2-3 seconds. The Warning screen will appear. Select OK and you will be taken to the last screen you were viewing. 5.1.2 Power Management The Magellan Maestro 4000/4040/4050 can be configured to automatically go into sleep mode after 20 minutes of no keys or touchscreen being pressed. Press the MENU key on the Magellan Maestro 4000/4040/4050 then, select System Settings and select Power Management. Select the Auto Power Off time and then, select OK. For more information on Power Management, see Power Management on page 98. 5.2 Resetting the Magellan Maestro 4000/4040/4050 In the event the Magellan Maestro 4000/4040/4050 should stop responding, press RESET button. If a route was active at the time the Magellan Maestro 4000/4040/4050 was reset, powering the Magellan Maestro 4000/4040/4050 back on will prompt you to resume, or cancel the active route. 5.3 Adjusting the Volume The VOLUME CONTROL lever is located at the top of the Magellan Maestro 4000/4040/4050 (see Top View on page 6). Use the lever to set the volume of the speaker to a desired level. The volume level indicator will appear on screen. 5.4 Repeating the Last Command While routing to a destination, if you missed the last verbal command, you can repeat it by pressing the VOLUME CONTROL lever down. Chapter 5: Navigation Basic Operation 5.5 Making Selections The Magellan Maestro 4000/4040/4050 comes equipped with a touch screen. To make a menu selection, or enter characters, simply touch the screen in the location of the item you wish to select. You can also use the NAVIGATION key (see Front View on page 5) to scroll around the screen and highlight the item to select. When the desired item is highlighted, press the ENTER key (see Front View on page 5) to select the item. 5.6 Inputting Text Characters Whenever you need to input names, street addresses, etc., the Magellan Maestro 4000/4040/4050 will display a keyboard. Touch the letter you want and, if you make a mistake, use the Backspace key to go back one character at a time. The Spacebar is used to insert spaces between characters or words. 5.7 Additional Characters (More Button) When you are entering characters, you may need to add punctuation or other special characters. When available, pressing the More button brings up a keypad with the characters shown here. Chapter 5: Navigation Basic Operation 5.8 Numerical Characters (123 Button) When available, pressing the 123 button brings up a keypad with the numeric characters shown here. 5.9 What Is QuickSpell?
The Magellan Maestro 4000/4040/4050 uses QuickSpell technology to provide you with the fastest method possible to enter characters. QuickSpell eliminates the possibility of a misspelled word or looking for a city or street that is not in the loaded database. As you begin entering characters, the QuickSpell feature of the Magellan Maestro 4000/4040/4050 dims out those characters which that are not available, thereby speeding up the process of entering data. Example:
Suppose that you need to input the name of a city--in this case, San Francisco. Select S. Select A. Select N. Chapter 5: Navigation Basic Operation Select the spacebar. When enough characters have been entered, the Magellan Maestro 4000/4040/4050 will automatically display the list of cities; or, if you feel that enough characters have been entered, select OK. Use the Navigation key to scroll the list up or down and select San Francisco, CA from the list. The list of items found in the database is limited to 100 items. When over 100 items have been found, Matches: > 100 will be displayed shown in the bottom right corner of the display; you may need to press the CANCEL key (see Front View on page 5) and enter additional characters. 5.10 Help with Address Entry When entering street names, please follow these simple guidelines to help you find your selection:
x Do not enter prefixes such as N or North. x Do not enter the street type such as Ave. or Avenue except in some cases where the street type is included before the street name (e.g. Via Calle, Avenue 378, or Rue Andre). x When entering a numbered street (e.g. 4th Street), use the numeric keypad to enter 4 and go back to the alpha keypad to enter th. x For streets with multiple words such as Overland Heights, you must enter the first word. Entering the word Heights will not return the desired street. Chapter 6: Traveling 6.1 Guidance Information Screens The Magellan Maestro 4000/4040/4050 has three screens you can use to assist you in traveling to your destination: the Map screen, the Maneuver List screen, and the TrueView/Split TrueView screen. Map: When a new destination is selected and calculated, the Map screen is displayed. This screen displays a map of your surrounding area along with the planned route (if calculated) and information about the route. This screen can be accessed when no route has been calculated by selecting Map or by pressing the VIEW key (see Front View on page 5.) while at the Destination screen. Maneuver List: This screen is available only when a route has been calculated. This screen displays a list of maneuvers to follow in order to arrive at the destination. It can also be used exclude a maneuver and then recalculate the route. To access the Maneuver List screen, press the VIEW key (see Front View on page 5.) while viewing the Map screen. TrueView: This screen is available only when a route has been calculated. This screen displays the next maneuver as a 3D graphic. It will help you to know which lane to be in and provides you with an easy-to-follow picture of the next maneuver. To access the TrueView screen, press the VIEW key
(see Front View on page 5.) while viewing the Maneuver List. You can also show the TrueView in split mode (see TrueView Options on page 60). This view shows the TrueView screen on the left side and the Map on the right side. Chapter 6: Traveling 6.2 Map Screen The Map screen is the most commonly used screen in the Magellan Maestro 4000/4040/4050 and provides you with detailed information about where you are and where you are going. GPS Signal Position Cursor (points in the direction you are traveling) 2D/3D Map Toggle Next Road Distance to Destination Destination By touching the POI icon on the screen, you can get information and route to it. As you travel, the Map screen constantly updates your location and provides you with not only a map but a visual indication of where you are on the map. 6.3 Changing from 2D to 3D Map View The Map screen can be changed between 2D (view overhead of the position cursor, and 3D (view overhead and slightly behind). The 3D view offers a more realistic view showing a perspective of the roads ahead. While in 3D Map mode, you can still touch icons on the screen to route to them while driving, and you can zoom in and out. You cannot however, scroll the map, and the map orientation is set at Heading Up. When in Split TrueView, the map portion of the screen will be in 2D mode. Chapter 6: Traveling 6.4 Changing the Map Zoom Levels While viewing the Map screen, you can zoom in (enlarge the map) by pressing the + (plus) key or zoom out (shrink the map) by pressing the -
(minus) key (see Front View on page 5.). Note: The Zoom In and Zoom Out keys can also be used the scroll through long lists. While viewing a list, press the Zoom Out key to scroll the list down one page at a time and press the Zoom In key to scroll the list up one page at a time. 6.5 Maneuver List Screen The Maneuver List screen can be viewed only after a route has been calculated. From the Map screen, press the VIEW key to bring up a list of all of the maneuvers along the route. When you are done viewing the Maneuver List screen, press the VIEW key twice to return to the Map screen, or wait a few moments and it will return automatically. Next Maneuver Direction of Travel Distance to Destination Direction of Destination Distance to Next Maneuver Estimated Time to Destination Chapter 6: Traveling 6.6 TrueView Screen The Magellan Maestro 4000/4040/4050 uses TrueView technology to display a three-dimensional picture of the next maneuver. The TrueView screen can be viewed only after a route has been calculated. From the Map screen, press the VIEW key twice to view the TrueView screen. to Destination Destination In split mode, the left half of the screen shows TrueView, while the right half of the screen shows the Map. Map with Planned Route Next Maneuver Direction of Travel Distance to Destination Distance to Next Maneuver Estimated Time to Direction of Destination Destination Chapter 6: Traveling 6.7 Choosing the Route Method Every route is calculated based on the Route Method criteria selected. Every time a new destination is selected, the Magellan Maestro 4000/4040/4050 prompts you for the method that will be used to calculate the route. Shortest Time: This selection calculates a route that should take the least amount of time using speed limits and other information in the database. Other factors, such as traffic conditions, cannot be used in the calculation of shortest time. Shortest Distance: This option calculates the route using the most direct route to the destination. This route may not be the fastest due to lower speed limits, left turns or other factors. Least Use of Freeways: This selection calculates the route avoiding freeways whenever possible. Most Use of Freeways: This selection calculates the route using freeways as much as possible. This option will use toll roads unless specified. See Route Preferences on page 61. View Destination on Map: Before you select your Route Method, you can see where you are going. Avoid Toll Roads: Check this option to calculate your route without using toll roads. 6.8 Changing the Route Method While routing and viewing the Map screen, the Maneuver List screen, or the TrueView screen, press the ESCAPE key. Select Route, then select the new route method. The route will be re-calculated using the new Route Method chosen and the Map screen will be displayed. Press the VIEW key to see the Maneuver List with the new route. 6.9 Cancelling a Planned Route While viewing the Map screen, the Maneuver List screen, or the TrueView screen, press the ESCAPE key. Select Yes to cancel the route and display the Destination screen. Chapter 6: Traveling 6.10 Detouring from the Planned Route If you exit the planned route, the Magellan Maestro 4000/4040/4050 will get you back on course in one of three ways. 1. If, while driving, you detour from the planned route, the Magellan Maestro 4000/4040/4050 will automatically recalculate the route based on your new vehicle position. 2. If you exit the planned route before its completion and turn off your vehicle, the Magellan Maestro 4000/4040/4050 will switch to battery power, unless your cigarette lighter maintains constant power. In either situation, the Magellan Maestro 4000/4040/4050 will automatically suspend power when enabled through customization. While in sleep mode, navigation functions will be suspended and guidance will resume when the Magellan Maestro 4000/4040/4050 wakes up. 3. If while routing, the Magellan Maestro 4000/4040/4050 fails to respond, reset the Magellan Maestro 4000/4040/4050 as described on page 12. The Resume Guidance screen will appear. Select Resume to continue the route to the selected destination. Select Cancel to clear the route and display the Destination screen. 6.11 Excluding a Maneuver in the Planned Route While traveling or setting up your destination you may find it necessary to exclude one of the maneuvers in the Maneuver List. This could be due to an accident or street maintenance you want to avoid. The Magellan Maestro 4000/4040/4050 provides you with tools to select a specific maneuver, exclude it from the planned route and reroute the trip. Press the VIEW key to get to the Maneuver List. Select the maneuver you wish to exclude. The details for the maneuver are displayed. Select Exclude. The trip will be recalculated, excluding the selected maneuver. This calculation is done using the same Route Method that was chosen originally. After the route is recalculated, the Map screen is displayed. Chapter 6: Traveling 6.12 Displaying Information About Your Present Location Anytime that you want to view information about your present location you can press the LOCATE key. The first screen displays your heading and the street you are on, the state and city you are currently traveling in, the latitude and longitude of your present location, a compass, and your speed. The next screen displays the street you are currently traveling on, the distance to and the next street on the map, and the distance from and the last street you passed. 6.13 Saving Your Current Address Book While you are in the Locate your current location to your Select the Save Location button. Location to Your screen, you can save Address Book. The information about your location is displayed. Select Edit Name and/or Edit Information and use the keypad to assign a name to the location and other information about it. If the point you are saving is off-road, the nearest road information will be used. When you have finished, select Save. The location is saved to your Address Book and you are returned to the Locate screen. 6.14 Finding POIs Along Your Route While driving along a route, if you need to find a gas station, ATM, or other POI, the Magellan Maestro 4000/4040/4050 can find the nearest POI and route to it. Then, when you have completed the side route, resume guidance to your original destination. While driving along a route, press the ENTER key. Chapter 6: Traveling Select Dining, ATM, Gas.... Select the desired POI category. A list of the nearest POIs is displayed. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. The Magellan Maestro 4000/4040/4050 will calculate a new route to the selected POI from your current position. When you have arrived at the new destination, you will be prompted to resume guidance to your original destination. Select Resume. The Magellan Maestro 4000/4040/4050 will calculate the route to your original destination using the Route Method previously selected. 6.15 Finding a Detour Along Your Route While driving along a route, if you encounter traffic, road construction, or other situation you might need to navigate around, the Magellan Maestro 4000/4040/4050 can calculate an alternate route to your destination. While driving along a route, press the ENTER key. Select Detour. Chapter 6: Traveling Select the distance of the detour. Select 3 miles, 5 miles, or 10 miles. Or, you can enter a custom distance. Select Custom and select the custom distance. Enter the number of miles for your detour and then select OK. Select Route. The Magellan Maestro 4000/4040/4050 will recalculate the alternate route to your destination. You can also choose to have the Magellan Maestro 4000/4040/4050 detour you around traffic automatically by enabling smart detour. See Detour Options on page 62. Chapter 7: Selecting Destinations 7.1 Destination Screen Map Button Home Button Globe Button Current Country for Destination Select Address Address Book Points of Interest Intersection 7.2 Country Selection (Globe Button) Country selection is used to help speed up searching by narrowing down the database. Before entering a destination, make sure you select the country where your destination is located. To select the country, select the Globe button then, select the country you wish to search. The current destination country is displayed at the top of the Destination screen. 7.3 Entering and Routing to Your Home Address The Magellan Maestro 4000/4040/4050 enables you to enter an address to assign to your Home button. The Home button allows you one touch access to the address you route to most often. Select the Home button. If this is the first time using this button, you will be prompted to enter an address. Select Yes. Select either Search by City, Search by Zip Code, or Search by State. For this example select Search by CIty. Enter the first few characters of the city name (see Inputting Text Characters on page 13). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the street name (see Help with Address Entry on page 15). Enter the address. The acceptable range of street numbers is displayed at the top of the screen. Enter the street number and select Done. At this point you can choose to edit the information or, if you are finished, select Save. Chapter 7: Selecting Destinations Now, when you press the Home button, you will be prompted to either route to or change the Home address. 7.4 Selecting a Destination Using Select Address Search by City page 27 Search by Zip Code page 27 Search by State page 28 Previous City page 29 A destination can be created by entering the street address that you want to go to. This address is not automatically added your Address Book but is saved to your Previous Destinations list if you have routed to it. You have four options: Search By City, Search by Zip Code, Search By State, or Previous City. Use Search By City when you know the city that the address can be found in. Use Search by Zip Code if you arent sure of how to spell the city, but know the zip code. Use Search By State when you dont know, or are unsure of the city name. You will be given a listing of all of the cities for the state you select that have the street name you are looking for. Use Previous City to speed up your search by not having to re-enter a city you have used before. Additionally, The Previous Cities list places your current city at the top of the list. Chapter 7: Selecting Destinations 7.4.1 Search By City From the Destination screen, select Select Address and then, select Search By City. Enter the first few characters of the city name (see Inputting Text Characters on page 13). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.4.2 Search by Zip Code From the Destination screen, select Select Address then, select Search by Zip Code. Enter the zip code select OK, then select the city. Enter the street name ( see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Chapter 7: Selecting Destinations Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.4.3 Search By State From the Destination screen, then, select Search By State. Enter the first few characters for OK. select Select Address the state and select Select the state. Enter the street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Select the desired city from the list. Only those cities that contain the street name and are within the state selected are displayed. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. Chapter 7: Selecting Destinations 7.4.4 Previous City From the Destination screen, select Select Address then, select Previous City. Select the city from the list. Enter the street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. Chapter 7: Selecting Destinations 7.5 Selecting a Destination Using the Address Book Previous Destinations page 30 Favorites page 32 List Addresses page 34 Create New Entry page 35 The Address Book can store up to 200 addresses. When you select Address Book you are given five options: Previous Destinations lets you select from a list of the last 50 destinations you routed to; List Addresses displays a list of all of the addresses you have stored in your Address Book; Favorites gives you a shortened list of entries from your Address Book marked as Favorites; Create New Entry lets you add a new address to your Address Book; and Trip Planner (indicated by the Trip button) lets you create a multi-destination trip from entries. 7.5.1 Previous Destinations From the Destination screen, select Address Book then, select Previous Destinations. Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Chapter 7: Selecting Destinations Select Route. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.5.1.1 Saving a Previous Destination to the Address Book From the Destination screen, select Address Book, then select Previous Destinations. Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Edit. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. When you have finished making changes, select Save, then press ESCAPE. Chapter 7: Selecting Destinations 7.5.1.2 Deleting A Previous Destination From the Destination screen, select Address Book then, select Previous Destinations. Use the Navigation key to scroll the list up or down (if necessary) and select the desired previous destination. Select Delete. A dialog box will appear to confirm your selection. Select Yes. The Previous Destination is deleted from the list. 7.5.2 Favorites You can add address book entries to your Favorites list by selecting the Favorites box at the bottom of the Edit Address Book screen. Only address book entries can be saved as Favorites, Previous Destinations must be saved to the Address Book first, and can then be designated as a favorite. The Favorites list is a shorter list of those address book entries that you travel to often. From the Destination screen, select Address Book, then select Favorites. Use the Navigation key to scroll the list up or down (if necessary) and select the destination from the list of addresses. Select Route. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. Chapter 7: Selecting Destinations 7.5.2.1 Editing a Favorite From the Destination screen, select Address Book then, select Favorites. Use the Navigation key to scroll the list up or down (if necessary) and select the desired favorite. Select Edit. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. When you have finished making changes, select Save and then, press ESCAPE. 7.5.2.2 Deleting A Favorite From the Destination screen, select Address Book then, select Favorites. Use the Navigation key to scroll the list up or down (if necessary) and select the desired favorite. Select Delete. A dialog box will appear to confirm your selection. Select Yes. The entry is deleted from the list. Chapter 7: Selecting Destinations 7.5.3 List Addresses List Addresses shows all entries stored in your address book. It does not include previous destinations but does include those entries designated as Favorites. From the Destination screen, select Address Book then, select List Addresses. Use the Navigation key to scroll the list up or down (if necessary) and select the destination from the list of addresses. Select Route. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.5.3.1 Editing an Address From the Destination screen, select Address Book then, select List Addresses. Use the Navigation key to scroll the list up or down (if necessary) and select the desired address. Select Edit. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. You can also designate the address as a favorite by checking the box at the bottom of the screen. When you have finished making changes, select Save and then, press ESCAPE. Chapter 7: Selecting Destinations 7.5.3.2 Deleting an Address From the Destination screen, select Address Book then, select List Addresses. Use the Navigation key to scroll the list up or down (if necessary) and select the desired address. Select Delete. A dialog box will appear to confirm your selection. Select Yes. The address is deleted from the list and you are returned to the Address Book screen. 7.5.4 Create New Entry Use Create New Entry to add entries to your address book. These entries can then be designated as Favorites to include in the Favorites list. 7.5.4.1 Search by City From the Destination screen, select Address Book then, select Create New Entry. Select Search by City. Enter the first few characters of the city name (see Inputting page 13). Select OK. Use the Navigation key to scroll necessary) and select the desired Chapter 7: Selecting Enter the street name (see Help on page 15). Select OK. Use the Navigation key to scroll necessary) and select the desired street. Text Characters on the list up or down (if city. Destinations with Address Entry the list up or down (if Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. You can also designate the address as a favorite by checking the box at the bottom of the screen. When you have finished making changes, select Save and then, press ESCAPE. 7.5.4.2 Search by Zip Code From the Destination screen, select Address Book then, select Create New Entry. Select Search by Zip Code. Enter the zip code and select OK, then select the city. Chapter 7: Selecting Destinations Enter the street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The numbers is displayed at the top of the screen. Select Done. acceptable range of The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. You can also designate the address as a favorite by checking the box at the bottom of the screen. When you have finished making changes, select Save and then, press ESCAPE. 7.5.4.3 Search by State From the Destination screen, select Address Book then, select Create New Entry. Select Search by State. Use the keypad to enter the first few characters for the state and select OK. Select the state. Chapter 7: Selecting Destinations Enter the street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Use the Navigation key to scroll the list up or down and select the desired city. (These are all of the cities in your loaded database that have the street name you selected.) Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. You can also designate the address as a favorite by checking the box at the bottom of the screen. When you have finished making changes, select Save and then, press ESCAPE. 7.5.4.4 Previous City From the Destination screen, select Address Book, then select Create New Entry. Select Previous City. Chapter 7: Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. Select Done. The top line (Name) and the bottom line (Information) can be edited. The address cannot be changed. Select the line you want to modify. Use the keypad to enter the desired text and select OK. You can also designate the address as a favorite by checking the box at the bottom of the screen. When you have finished making changes, select Save and then, press ESCAPE. 7.5.5 Trip Using the each one Trip route to efficient 7.5.5.1 From the then select Select Use the select OK. From the Planner Trip Planner, you can enter multiple destinations for your trip and route to of them in order. Additionally, using the Planner you can optimize your trip and arrive at your destinations in the most manner. New Destination screen, select Address Book, Trip (Trip button). Chapter 7:
Selecting Destinations New. keypad to enter a name for the new trip and pop-up menu, select Add. Select Trip Planner Address screen, select method for adding a destination to your trip:
From the the Map (Map button) will add a destination by selecting a point on the map;
Select Address will add a destination by creating a new address; Address Book will add a destination from a previous destination, Address Book, or favorites; Dining, ATM, Gas... will add a destination from the POI database;
and Intersection will add a destination of two intersecting streets. Continue adding destinations. When you are finished, select Save. Chapter 7: Selecting Destinations Optimizing a Trip Route Optimization, you can sort the destinations in your trip from closest to From the Trip Planner screen, select Edit. trip to optimize. Optimize. destinations are sorted from closest to from you current location. Save. Chapter 7:
Selecting Destinations Guide Me Destination screen, Address Book. then Trip (Trip button). GuideMe. Trip. first destination in the destination in the list selecting the third exclude the first and 7.5.5.2 With farthest. Select the Select The farthest Select 7.5.5.3 From the select select the Select Select the Select the list you wish to route to. Note: Selecting the second will exclude the first destination, destination in the list will second destinations, and so on. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.5.5.4 Edit Destinations within a trip can be moved up or down, deleted, or added to. From the Trip Planner screen, select Edit. Chapter 7: Selecting Destinations Select the trip to edit. Select the destination you wish to delete, and select Delete from the pop-up menu. Select the destination you wish to change, and select Move Up from the pop-up menu. When you have finished, select Save and you are returned to the Trip Planner screen. 7.5.5.5 Delete and Rename From the Trip Planner screen, select Delete, Rename. Chapter 7: Selecting Destinations Select Delete. Select the trip you wish to delete. A dialog box will appear to confirm your selection. Select Yes. The trip has been deleted. Select Rename. Select the trip to be renamed. Chapter 7: Selecting Destinations Use the backspace key to delete the old name; then, enter the new name for the trip. When you have finished, select OK. The trip has been renamed. 7.6 Selecting a Point of Interest as a Destination Spell Name page 46 Select Category page 47 Custom POIs page 49 Dining, ATM, Gas... Points of Interest (or POIs) are commercial or recreational locations, landmarks, or services that are preloaded into the Magellan Maestro 4000/4040/4050 database. There are over six million POIs in the database, which range from restaurants, parks, gas stations, and banks, to schools and police stations, and more. The purpose of the POI database (accessed through the Dining, ATM, Gas... menu option) is to provide you with a list of popular destinations without having to enter the address manually in order to route to them. Chapter 7: Selecting Destinations 7.6.1 Spell Name If you know the name of the POI you are looking for, find it using the Spell Name feature. From the Destination screen, select Dining, ATM, Gas.., then select Spell Name. Enter the name of the POI. 7.6.1.1 Nearest Selecting Nearest will list the POIs matching the name you entered from closest to farthest from your current position. Select Nearest. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.1.2 List By City Selecting List by City will list the POIs matching the name you entered within a selected city sorted by distance from the city center. Select List by City. Enter the city name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Chapter 7: Selecting Destinations Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.1.3 Select Category Selecting Select Category enables you to narrow the list of POIs by selecting the category of the name you spelled. Select Select Category. Use the Navigation key to scroll the list up or down and select the desired POI category. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.2 Select Category If you do not know the name of the POI you are looking for, but know the category (restaurant, bank, gas station, etc.), you can find it using Select Category From the Destination screen, select Dining, ATM, Gas..., then select Select Category. Select the POI category. Chapter 7: Selecting Destinations 7.6.2.1 Nearest Selecting Nearest will list the POIs in the category selected from closest to farthest from your current position. Select Nearest. A list of all the POIs in the selected category nearest to your current position is displayed. Select the POI from the list. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.2.2 List by City Selecting List by City will list the POIs in the category selected within a specified city. Select List by City. Enter the name of the city you wish to search from. When you are finished, select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.2.3 Spell Name Selecting Spell Name will list the POIs in the category selected, matching the name you entered. Select Spell Name. Chapter 7: Selecting Destinations Enter the name of the POI. When you are finished, select OK. Select Nearest to list the POIs matching the characters entered that are nearest to your current position. Select List by City to list the POIs matching the characters entered that are nearest to a particular city. Enter the name of the city. When you are finished, select OK. Select the city from the list. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.2.4 Cuisine Type When selecting restaurants, you are presented with an additional method for finding POIs. Select Cuisine Type. Use the Navigation key to select the type of restaurant you prefer. Use the Navigation key to scroll the list up or down (if necessary) and select the desired POI. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.6.3 Custom POIs Please refer to page 112 for information on creating and loading Custom POIs. From the Destination screen, select Dining, ATM, Gas..., then select Custom POIs. Chapter 7: Selecting Destinations Select the category. If the POI list has more than 15 returns, you can further narrow the search by selecting either Nearest or Spell Name. Select the desired POI from the list. Select Route to go to the selected Address, or select Cancel to return to the Select Custom POI menu. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 willcalculate the route.When the calculations arecomplete,the Mapscreenwillbe displayed. Chapter 7: Selecting Destinations 7.7 Selecting an Intersection as a Destination Search by City page 51 Search by Zip Code page 52 Search by State page 52 Previous City page 53 An intersection of two streets can be used as a destination. The search for the intersection can be done whether or not you know the city. If you know the city, you can start there; if you are unsure of the city, you can start with the state. 7.7.1 Search by City From the Destination screen, select Intersection then, select Search by City. Enter the first few characters of the city name (see Inputting Text Characters on page 13). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the first street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down and select the first street from the list. Chapter 7: Selecting Destinations Enter the second street name and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.7.2 Search by Zip Code From the Destination screen, select Intersection then, select Search by Zip Code. Enter the zip code and select OK, then select the city. Enter the first street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down and select the first street from the list. Enter the second street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.7.3 Search by State From the Destination screen, select Intersection then, select Search by State. Chapter 7: Selecting Destinations Enter the first few characters for the state and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the state from the list. Enter the first street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the first street from the list. Enter the second street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. 7.7.4 Previous City From the Destination screen, select Intersection then, select Previous City. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the first street name (see Help with Address Entry on page 15). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the first street from the list. Chapter 7: Selecting Destinations Enter the second street and select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the second street from the list. Select the desired Route Method. The Magellan Maestro 4000/4040/4050 will calculate the route. When the calculations are complete, the Map screen will be displayed. Chapter 8: Navigation Options Navigation Options are only available when you are in Navigation Mode. When going to the Main Menu from the Music Player or from the Photo Viewer, this option will be grayed out. To access these features, press the MENU key on the Magellan Maestro 4000/4040/4050 and select Navigation Options. 8.1 Configuration Configuration enables you to customize the advanced navigation features of the Magellan Maestro 4000/4040/4050. Select Configuration. 8.1.1 POI Selection From the POI Selection menu, you can choose which icons to display on the Map screen. We recommend being selective about which icons you choose to display in order to prevent your map screen from being cluttered. For a list of POI Categories, see POI Categories on page 117. Select POI Selection. Select Mark All to display all POI icons on the Map screen. Select Clear All if you wish not to have any POI icons displayed on the Map screen. You can also select individual icons to display or hide on the Map screen. When you have finished, select Save to save your selection and return to the Configuration menu. 8.1.2 Custom POIs The Custom POI menu enables you to select POIs previously loaded into your Magellan Maestro 4000/4040/4050 using the Magellan Maestro POI Manager software (see page 112). The following instructions are assuming that you have loaded one or more custom POIs into your Magellan Maestro 4000/4040/4050. Select Custom POIs. Chapter 8: Navigation Options Select Select a POI File. Use the Navigation key to scroll the list up or down (if necessary) and select a POI file. With the file selected, you are returned to the Custom POIs menu. Select Display Categories. The categories you created are displayed in the same way as the built-in POIs. Select Mark All to display all POI icons on the Map screen. Select Clear All if you wish not to have any POI icons displayed on the Map screen. You can also select individual icons to display or hide on the Map screen. When you have finished, select Save to return to the Configuration menu You can also be alerted when you approach a custom POI. The Set Alarm function works for Custom POIs only and only if the POI has been selected to show on the Map screen. Select Set Alarms. Again, you can select all, none, or individual POIs to have an alert set. Select Mark All to set an alert for all custom POI icons on the Map screen. Select Clear All if you wish not to have any alerts set for custom POI icons displayed on the Map screen. You can also select individual categories to have an alert set. When you have finished, select Save to return to the Custom POIs menu. With the POI alerts set, you can now choose at what point you will be alerted. Select Alert Parameters. Chapter 8: Navigation Options Select the POI category to customize.
1 2 | Part 2 | Users Manual | 3.55 MiB | December 02 2007 |
The Detection Angle is set to alert you when you are within so many degrees of the POI. Select Detection Angle. Use the numeric number of degrees alert. When you OK. Chapter 8:
Navigation Options is set to alert you when you are within a certain The First Warning number of feet from the POI. Select First Warning. Use the numeric number of feet in When you have Chapter 8:
Navigation Options The Last Warning is set as a final alert when you are within a certain number of feet from the POI. Select Last Warning. Use the numeric number of feet in When you have When you have keypad to enter the in which to set the have finished, select keypad to enter the which to alert you. finished, select OK. keypad to enter the which to alert you. finished, select OK. set the parameters as you like, select Save. Chapter 8: Navigation Options 8.1.3 Map Options Map Options enable you to determine the behavior of the Map while you are driving. Select Map Options. With Scrolling enabled, the vehicle position icon will always remain in the same position with the map scrolling, or moving as while the vehicle is in motion. With Scrolling disabled, the vehicle position icon will move forward slightly; then, the map will scroll down. Having Scrolling disabled allows for a faster display. Heading Up sets the map display so that the direction of travel is always at the top of the screen. North Up sets the map display so that North is always at the top of the screen. North Up is only available in 2D Map mode. Select Miles or Kilometers as the unit of measure for distance. When you have finished, select Save. 8.1.4 TrueView Options TrueView options enable you to control how and when the TrueView screen is displayed. Select TrueView Options. Select Split TrueView to enable the TrueView/Map Screen mode. See TrueView Screen on page 19. Select Disable TrueView if you do not want the TrueView screen to appear during routing. Select Manual TrueView to show the TrueView screen only by pressing the View key. Select Auto TrueView to have the TrueView screen appear automatically when the next maneuver is approaching. When you have finished, select Save. 8.1.5 Select Map Color Select Select Map Color. With Automatic Night Mode enabled, the Magellan Maestro 4000/4040/4050 will switch between a Day screen and a Night screen based on sunrise and sunset times for your current location. Select Day Screen to choose a color scheme for the map while you are driving during the day. Select Night Screen to select a color scheme for driving at night. When you have finished, select Save. Chapter 8: Navigation Options Select from nine available color schemes:
When you have finished, select Save and you will be returned to the Select Map Color menu. 8.1.6 Route Preferences Route Preferences enable you to set parameters for the Magellan Maestro 4000/4040/4050 to follow when calculating a route. Select Route Preferences. Automatic Re-Route will cause the Magellan Maestro 4000/4040/4050 to try up to three times to automatically re-route to the destination when it has detected that the vehicle has deterred from the calculated route. When you have finished, select Save. Chapter 8: Navigation Options 8.1.7 Detour Options The Magellan Maestro 4000/4040/4050 comes equipped with SmartDetour. If you are driving on the freeway with SmartDetour enabled and your speed drops below 15 MPH, you may press the detour icon on the Map screen in order for the Magellan Maestro 4000/4040/4050 to calculate an alternate route around traffic. Select Detour Options. Select the distance of the detour. You can select from a preset distance of three miles, five miles, or 10 miles. You can also select a custom distance. Select Custom, and then select the button to the right to enter a custom distance. Enter the number of miles and select OK. Next, select the amount of time the Magellan Maestro 4000/4040/4050 will wait before alerting you. Select the Time button. Enter the number of minutes and select OK. Enable Automatic Detour is selected by default as shown by the checkbox mark. To disable automatic detour, deselect Enable Automatic Detour.. When you have finished, select Save. Chapter 8: Navigation Options When you encounter traffic, and the set time has elapsed, the Detour icon will flash on the Map screen. Touch the icon on the screen to have the Magellan Maestro 4000/4040/4050 calculate the detour. You can choose to ignore the Detour alert; and after one minute it will stop flashing until the set time has elapsed again when it will alert you once more. 8.1.8 Menu Colors You can change the color of the menu screens by selecting one of four color schemes. Select Menu Colors. Select the desired color scheme. When you have finished, select Save. 8.1.9 Tone Options As you approach a maneuver, an audible alert sounds to let you know to make the maneuver. Select Tone Options. Select either Bell, Chime, or Beep. When you have finished, select Save. 8.1.10 GPS Options GPS Options provide you with information on the satellite signal as well as the ability to acquisition time. 8.1.10.1 GPS Status speed up signal The GPS Status screen is available by pressing the GPS Signal icon on the Map screen (see Map Screen on page 17) as well as through the GPS Options menu. GPS Status monitors the satellite signal. For more information on the GPS Status screens refer to GPS Status Screen on page 120. Chapter 8: Navigation Options 8.1.10.2 Set GPS Position Set GPS Position enables you to manually set the location of the Current Position icon. If you have travelled a long distance with the Magellan Maestro 4000/4040/4050 off, it may take some time for the Magellan Maestro 4000/4040/4050 to reacquire a satellite signal. By manually setting the position of the Magellan Maestro 4000/4040/4050, you are telling the Magellan Maestro 4000/4040/4050 where you are and will speed up the satellite signal acquisition. Make sure you first select the country you are in by pressing the Globe button on the Destination screen (see Country Selection (Globe Button) on page 25). Select Set GPS Position. Enter the first few characters of the city name (see Inputting Text Characters on page 13). Select OK. Use the Navigation key to scroll the list up or down (if necessary) and select the desired city. Enter the street name (see Help with Address Entry on page 15). Select Navigation key to scroll the list up or down (if necessary) and select the OK. Use the desired street. Enter the street address. The acceptable range of numbers is displayed at the top of the screen. If you do not know the exact address, just select Done and the Magellan Maestro 4000/4040/4050 will use the lowest number in the range. Select Done to continue. You will be returned to the Configuration menu. Go to the Map screen. Your current position is now set to the address you entered. 8.1.11 Simulator Mode In Simulator Mode, you can demonstrate the capabilities of the Magellan Maestro 4000/4040/4050 without actually driving. In order for the simulation to work, you must set a route first. Select Simulator Mode. Select Simulate to begin the simulation. Set the speed variance of the simulation: x1 will drive at normal speed using known speed limits;
x1.5 will drive at one and a half times normal speed; x2 will drive at two times normal speed. Return to the Map screen to view the simulation. To disable Simulator Mode, select Stop, or when the power is turned off the Simulator will stop. Chapter 8: Navigation Options 8.1.12 Automatic Volume The Magellan Maestro 4000/4040/4050 can be set to automatically increase the volume when the vehicle exceeds 45 MPH in order to compensate for road noise. Select Automatic Volume. Select the number increment by which to increase the volume. Select Enable. When you have finished, select Save. 8.1.13 Backup and Restore The Magellan Maestro 4000/4040/4050 has the capability to back up your information (Address Book, Previous Destinations, etc.) to an optional memory card. 8.1.13.1 Backup Select Backup and Restore then, select Backup. If you do not have a card inserted, you will be prompted to insert a card. Make sure the card is unlocked to allow data to be copied to it. Insert a card and reselect Backup. A dialog box will appear asking you to confirm your selection. Select Yes. The files are copied to the memory card. 8.1.13.2 Restore To restore the files to the hard disk, select Backup and Restore then, select Restore. If you do not have a card inserted, you will be prompted to insert a card. Insert a card and reselect Restore. A dialog box will appear asking you to confirm your selection. Select Yes. The files are copied to the hard disk. Chapter 8: Navigation Options 8.1.14 Map Information Product Information displays information about the map and database installed in your Magellan Maestro 4000/4040/4050. This information aids our Technical Support Representative in finding a solution to whatever problem you may have. 8.2 Trip Computer The Trip Computer is a valuable tool for recording the mileage and time spent driving while on business or vacation. The information for the trip can be saved and viewed at any time, providing you easy access to information on your current trip, as well as previous trips. To access these features, press the MENU key on the Magellan Maestro 4000/4040/4050 and select Navigation Options. Select Trip Computer. 8.2.1 Current Trip When you begin a new trip and you need to record the information, access the Trip Computer. There you can save the information displayed for the current trip (if needed) and reset the Trip Computer to zero in preparation for your new trip. Select Trip Computer Select Current from the list of saved Trip Reports. Chapter 8: Navigation Options The Trip Computer is always in a Running state. The information for the current trip is displayed. 8.2.1.1 Stopping or Starting the Trip Computer At any time the Trip Computer can be stopped and started. If the Trip Computer is currently running, select Stop. The Trip Computer will stop recording until restarted or reset. While the Trip Computer is in a Stopped state, select Start to continue recording the current trip or select reset to begin a new trip. 8.2.1.2 Saving the Current Trip Report When you have finished with your trip, you can save the information for later viewing. Select Save at any time. Use the keypad to enter a name for the Trip Report and select OK when you are finished. Chapter 8: Navigation Resetting the Trip Computer starting a new trip that you want to record, to reset the Trip Computer first. Select the information will be set to zero. The Computer will Running state. Viewing a Saved Report select the Trip Report you wish to view. Trip Computer Trip Report is displayed. Press the key when you are finished to view the trip to the Trip Computer Deleting a Trip Trip Report to be Options 8.2.1.3 Before you need Reset and Trip remain in a 8.2.1.4 Trip From the screen, The saved ESCAPE and return screen. 8.2.1.5 Report Select the deleted. Select Delete. Chapter 8: Navigation Options The trip is deleted and you are returned to the Trip Computer screen. Chapter 9: Bluetooth 9.1 How to use the Dialer 9.1.1 Introduction The Dialer program is a main part of Magellan Maestro 4000/4040/4050 that allows you to use it as a Hands-free device for a Bluetooth wireless-technology enabled mobile phone. You can tap your Magellan Maestro 4000/4040/4050 to place and receive calls instead of pressing the phones keypads. Its a solution of wireless connection between the Magellan Maestro 4000/4040/4050 and the Bluetooth wireless-technology enabled mobile phone. 9.1.2 Main Interface The main interface of BlueSoleil is as below:
9.1.3 Pair Mode For the first time of use, no mobile phone paired or connected. The system will automatically switch Pair Mode to waiting for pairing action from your mobile phone. 9.1.3.1 The pairing window shall pop up, if it is not the first time of use, you need to click in the main interface. Notes: The paring mode can be canceled by clicking in the paring window. Pairing will be failed if the process cannot be finished within 1 minute. Chapter 9: Bluetooth 9.1.3.2 Make paring process on your mobile phone. (See the user guide of your mobile phone.) Figure 3~3 9.1.3.3 After you input the passkey in your mobile phone, there shall be a passkey input window pop up in your Magellan Maestro. Then you need to input the same numbers as you input to your mobile phone to this pop up window. 9.1.4 Establish Connection There are two ways to establish connection with the Bluetooth wireless technology enabled mobile phone. 9.1.4.1 Connect Tap in the main interface to search and connect your paired mobile phone. Figure 3~4 Chapter 9: Bluetooth Note:
The device searching mode can be canceled by clicking in the connecting window.
If your mobile phone doesnt support Hands-free service and just support the Headset service, you neednt connect. If you dial a number out from your mobile phone or incoming call the Headset service shall be connected automatically. The main interface shall show up with a status message "xx connected, partial function supported only", and the button and shall be turned to grey as
. 9.1.4.2 The other way to connect You can run the BlueSoleil program by tapping Bluetooth icon in the main interface. Figure 3~5 Click button to enter the Bluetooth Manager Window. Chapter 9: Bluetooth Click to explore the Bluetooth wireless technology enabled mobile phone. Figure 3~7 Select a mobile phone, click to see the services that the mobile phone provided. Chapter 9: Bluetooth Figure 3~8 Select Hands-free Service, and Click to make connection with the hands-free mobile phone. Then there shall be a passkey input window pop up in your mobile phone if you havent paired your mobile phone with the Magellan Maestro before. You need input not more than 16 digital numbers you want to use as passkey to pair with the Magellan Maestro. Figure 3~9 After you input the passkey in your mobile phone, there shall be a passkey input window pop up in your Magellan Maestro. You need to input the same numbers you have inputted in your mobile phone. Chapter 9: Bluetooth Figure 3~10 Tap the icon to back to the main interface once the connection has been established. Figure 3~11 Note: If your mobile phone doesnt support Hands-free service and just support the Headset service, you just need choose your mobile phone in the device list (Figure 3~7), tap
(Figure 3~7) to pair with your mobile phone, and no need to connect. If you dial a number out from your mobile phone or an incoming call the Headset service shall be connected automatically. The main interface shall show up with a status message "xx connected, partial function supported only", and the button and shall be turned to grey as
. 9.1.5 Place a call You can make calls out after Hands-free connected successfully. Chapter 9: Bluetooth Four ways are available:
Place a call via Keypads Place a call via Contacts x Place a call via Call History Place a call via Redial. 9.1.5.1 Place a call via Keypads For place a call via keypads, you need to tap in the main interface (Figure 3~11). Then the keypads window shall pop up as below. Figure 3~12 You can input 13 characters: 0~9, and # with the buttons in the keypads. Input + by tapping the for about 1 second.
You can tap to delete the phone number you have inputted. Tap the button for about 1 half seconds the entire row shall be deleted.
Once you have inputted the phone number you want to dial out, you need to tap to dial out the call. 9.1.5.2 Place a call via Contacts If you have stored your contacts information in the Contacts (Figure 2~1), you can place the call via Contacts. There are two ways to use the Contacts to place a call:
Tap in the main interface (Figure 3~11).
Tap in the Keypads window (Figure 3~12). Chapter 9: Bluetooth Figure 3~13 x Use the Alphabetical index to find a contact. Tap and to move up and down to find a contact.
Choose a contact and tap to call the contact. Tap a contact, the detail phone information shall pop up as below:
Figure 3~14
Choose the Call Mobile, Call Work or the Call Home, tap to back to the forward window (Figure 3~13), and then you can choose a contact and tap to call the contact. 9.1.5.3 Place a call via Call History The Call History window displays the list of calls you have dialed out before, and is divided into 3 pages: Incoming / Outgoing / Missed. It will store the latest 20 calls of incoming call/Outgoing call/Missed call numbers.
(Total: 60) Chapter 9: Bluetooth There are two ways to use the Call History to place a call:
x Tap in the main interface (Figure 3~11). Tap in the Keypads window (Figure 3~12). Figure 3~15 x Tap to check the history of incoming calls. Tap to check the history of outgoing calls. Tap to check the history of missed calls. The records are stored as this format: <Phone Number> or <Caller Name>
<HH:MM> <AM/PM>, <MM/DD/YY>
<HH:MM:SS>
Tap and to move up and move down to find a record. x Tap to delete a record selected. Tap to delete all records in the page. Tap to save a callers information to Contacts. Tap to call back. 9.1.5.4 Place a call via Redial You can redial the last phone number you have called or received by tapping in the main interface (Figure 3~11). Chapter 9: Bluetooth Note: If there is no any call history, the button will be shown as in the main interface (Figure 3~11). After tap the dialing window shall pop up as below:
Figure 3~16 x Tap to cancel the dialing. Tap to mute the waiting ring before the call was received.
After tapping the mute button, it will show as
, tap it to cancel mute. Tap and to turn up and down the volume of waiting ring before the call was received.
Tap to set the window as minimum as an icon before other windows. 9.1.5.5 Dial Fail If dial failed due to network trouble or other unknown reasons, the Dialing Failed window shall pop up as below:
Chapter 9: Bluetooth Figure 3~17 x Tap to redial. Tap to cancel dial. 9.1.5.6 Dial Success If dial success, the Connected window shall pop up as below:
Figure 3~18 x Tap to pop up keypads to input the extension after connected. Tap to transfer the call to your mobile phone. Tap to transfer the call back to your Magellan Maestro after you have transferred the call to your mobile phone. Note: Some mobile phones dont support cycled transfer, so in this condition, you need to transfer the call back to your Magellan Maestro from your mobile phone if you have transferred the call to your mobile phone before. Chapter 9: Bluetooth x Tap to mute the microphone in your Magellan Maestro.
After tapping the mute button, it will show as
, tap it to cancel mute. Tap and to turn up and turn down the volume of the call. x Tap to hang up the call. Tap to set the window as minimum as an icon before other windows. Note: If the mobile phone that has paired with the Magellan Maestro does not support the Hands-free service and only support the Headset service, when you make a call out from that mobile phone the connected window shall be displayed as below:
Figure 3~18(2) x Tap to mute the microphone in your Magellan Maestro.
After tapping the mute button, it will show as
, tap it to cancel mute. Tap and to turn up and turn down the volume of the call. x Tap to hang up the call. Tap to set the window as minimum as an icon before other windows. 9.1.6 Incoming call When there is an incoming call, the Incoming Call window shall pop up as below:
Chapter 9: Bluetooth Figure 3~19 x Tap to pick up the incoming call. Tap to mute the incoming call ring.
After tapping the mute button, it will show as
, tap it to cancel mute. Tap to reject the incoming call. Tap and to turn up and turn down the volume of incoming call ring.
Tap to set the window as minimum as an icon before other windows. Note: If the mobile phone that has paired with the Magellan Maestro does not support the Hands-free service and only support the Headset service, the Incoming Call window shall be displayed different from the figure 3~19. It shall be displayed as below:
Figure 3~19(2)
Tap to pick up the incoming call. Chapter 9: Bluetooth x Tap to mute the incoming call ring.
After tapping the mute button, it will show as
, tap it to cancel mute. Tap and to turn up and turn down the volume of incoming call ring.
Tap to set the window as minimum as an icon before other windows. After tapping
, the Connected window shall pop up as below:
Figure 3~20 x Tap to transfer the call to your mobile phone. Tap to transfer the call back to your Magellan Maestro after you have transferred the call to your mobile phone. Note: Some mobile phones dont support to cycled transfer, in this condition, you need to transfer the call back to your Magellan Maestro from your mobile phone if you have transferred the call to your mobile phone before. x Tap to mute the microphone in your Magellan Maestro.
After tapping the mute button, it will show as
, tap it to cancel mute. Tap and to turn up and turn down the volume of the call. x Tap to hang up the call. Tap to set the window as minimum as an icon before other windows. 9.1.7 Exit You can tap in the main interface (Figure 3~11) to exit Dialer of BlueSoleil. Actually it is still running in background. Chapter 9: Bluetooth 9.2 How to Transfer files via Bluetooth wireless technology You can transfer files between your Magellan Maestro and the remote device via Bluetooth wireless technology. Such as downloading files from the remote device with Bluetooth wireless technology and uploading files to that device. Figure 4~1 9.2.1 Tap to enter Bluetooth Manager window. Figure 4~2 Chapter 9: Bluetooth 9.2.2 There are two ways (4.2.1 and 4.2.2) to connect to the Bluetooth File Transfer service of a remote device:
Select a device in the device list and tap to browse the service that the device provides (Figure 4~2). Figure 4~3 Tap the Bluetooth File Transfer to connect to the remote device, and then the Passkey Request window shall pop up as below:
Figure 4~4 9.2.2.1 Tap in the Bluetooth Manager window (Figure 4~2), the Passkey Request window shall pop up as Figure 4~4. Chapter 9: Bluetooth Note: If other device with Bluetooth wireless technology connects to the FTP service of your Magellan Maestro, an Authorization Requested window shall pop up as below:
Figure 4~5 x Tap to accept the connecting request. Once you have checked the checkbox before Always allow this device to access this service, this device should be able to connect to your Magellan Maestro without authorization in the next time. Tap to reject the connecting request. 9.2.3 Input the passkey you set that is not more than 16 digital numbers, and then the Remote Device window shall pop up as below:
Figure 4~6 Chapter 9: Bluetooth x Tap to view the share folders and share files in your Magellan Maestro. (Figure 4~7) Choose a folder or a file, and tap to download it to your Magellan Maestro. (Figure 4~8) x Tap to add a new folder to the remote device. Tap to open a folder, and tap to go back after you have tapped
Tap to exit the file transfer. Figure 4~7 x Tap to view the share folders and share files in the remote device.
(Figure 4~5) Choose a folder or a file, and tap to upload it to the remote device. (Figure 4~9) x Tap to add a new folder to your Magellan Maestro. Tap to open a folder, and tap to back after you have tapped
Tap to exit the file transfer. Chapter 9: Bluetooth Figure 4~8 Figure 4~9 Note: You can tap to cancel the file transferring. 9.3 How to use My Shortcuts The connection you have connected to shall be stored in My Shortcuts, you can delete the shortcut and can reconnect the device you have connected to by tapping the shortcut. Chapter 9: Bluetooth Figure 5~1 9.3.1 Tap in the main interface (Figure 5~1) to enter Bluetooth Manager window. Figure 5~2 9.3.2 Tap My Shortcuts to explore the shortcut stored in My Shortcuts. Chapter 9: Bluetooth Figure 5~3 Note: If the connection is active, the color of the shortcut shall be green. Choose the shortcut and tap to disconnect the connection. Figure 5~4 Chapter 9: Bluetooth Figure 5~5 x Tap to connect again. Tap to delete the shortcut. Tap to set the connection as the default connection. Tap to exit My Shortcuts window. 9.4 How to use Active Connections The Active Connections shows the incoming connection. You can find the active connection in that window and disconnect the connection. Figure 6~1 Chapter 9: Bluetooth 9.4.1 Tap in the main interface (Figure 6~1) to enter Bluetooth Manager window. Figure 6~2 9.4.2 Tap in the main interface (Figure 6~1) to enter Active Connections window. Figure 6~3 9.4.2.1 Choose a active connection, the shall display (Figure 6~4), and then you can tap this button to disconnect the active connection. Chapter 9: Bluetooth Figure 6~4 9.5 How to use Bluetooth Settings Figure 7~1 9.5.1 Tap in the main interface (Figure 7~1) to enter Bluetooth Manager window. Chapter 9: Bluetooth Figure 7~2 9.5.2 Tap to enter Bluetooth Settings window as below:
Figure 7~3 x Select the white box before Other devices can discover me so that other device can discover your Magellan Maestro. x Select the white box before Allow other devices to connect so that other devices can connect to your Magellan Road-Mate. 9.5.3 Tap the name area, the Device Name change window shall pop up as below:
Chapter 9: Bluetooth 9.5.4 Input the new device name you want to change to, and tap Figure 7~4 to verify or tap to cancel. 9.5.5 Tap in the Bluetooth Settings (Figure 7~3) to set the share folder you want to use in Bluetooth file transfer. Figure 7~5 9.5.6 The default share folder is My Flash Disk. If you have inserted a memory card to your Magellan Maestro, there shall be a Storage Card directory in the directory list. Select the folder you want to Chapter 9: Bluetooth use in the Bluetooth file transfer, and tap the Select button to set the share folder or tap the Cancel button to cancel the share folder change. 9.5.7 After setting the share folder, it shall back to Bluetooth Setting window (Figure 7~3), tap to save your settings and go back to Bluetooth Manager window (Figure 7~2). 9.6 How to Exit If you want to power off Bluetooth, what you need to do is like these steps as shown below:
Figure 8~1 9.6.1 Tap to power off the Bluetooth and go back the main interface. Note: If your Magellan Maestro is connected to other devices via Bluetooth wireless technology or other device connected to your Magellan Maestro via Bluetooth wireless technology, you need to disconnect the connection first; otherwise you could not power off the Bluetooth. Chapter 9: Bluetooth Figure 8~2 9.6.2 Tap to exit the main interface and go back to the Settings window. Figure 8~3 Chapter 10: System Settings The System Settings Menu contains system wide customization features which include: Brightness, Power Management, Password, and Language. To access these features, press the MENU key on the Magellan Maestro 4000/4040/4050 and select System Settings. 10.1 Brightness To change how light the screen appears, select Brightness. Use the right arrow to make the screen appear lighter, and use the left arrow make the screen appear darker. With On-battery dimming enabled, the screen will decrease in brightness by 20% to save some battery power. When you have finished, select OK to confirm or select ESC to cancel changes. 10.2 Power Management The Power Management features enable you to customize the features that will conserve battery power and display life. Select Power Management. Select the time period to put the Magellan Maestro 4000/4040/4050 in sleep mode. Select to enable or disable turning the screen off when music is being played. When you have finished, select OK to confirm or select ESC to cancel changes. 10.3 Password 10.3.1 Set Password You can protect the Magellan Maestro 4000/4040/4050 form unwanted use by enabling a password. Select Password. Select Set Password to enter a password. Use the keypad to enter the desired password. When you have finished, select OK. Re-enter the password to confirm. Use the keypad to re-enter the password exactly as you entered it the first time. When you have finished, select OK. Select OK to activate the password. To return to the System Settings menu without setting the password, select ESC. Once the password is enabled, you will be required to enter it when the Magellan Maestro 4000/4040/4050 is turned on or when it wakes up from sleep mode. Chapter 10: System Settings 10.3.2 Change Password Select Change Password. Use the keypad to enter the desired password. When you have finished, select OK. Re-enter the password to confirm. Use the keypad to re-enter the password exactly as you entered it the first time. When you have finished, select OK. Select OK to activate the password. To return to the System Settings menu without setting the password, select ESC. Once the password is enabled, you will be required to enter it when the Magellan Maestro 4000/4040/4050 is turned on or when it wakes up from sleep mode. 10.3.3 Delete Password Select Delete Password and use the keyboard to enter the password. A dialog box will apper asking you to confirm your selection. Select Yes. 10.4 Language To change the language for the menu text and voice prompts for navigation, select Language. Select the desired language. A dialog box will appear asking you to confirm your selection. Select Yes. The Magellan Maestro 4000/4040/4050 will restart itself with the new language enabled. Chapter 11: System Status The System Status menu give you further options to check the performance of your Magellan Maestro 4000/4040/4050. 11.1 Product Information Select Product Information to show the current application software versions. Also, the current hardware and firmware versions will be displayed. 11.2 User Storage Select User Storage to display the available space of the memory card if it is installed.. 11.3 Diagnostics Diagnostics enables you to test elements of the Magellan 4000/4040/4050 11.3.1 Audio Test The Audio Test will check the performance of the built-in speaker. 11.3.2 Touchscreen Test The Touchscreen test will enable you to recalibrate the touchscreen should it not be tracking properly. 11.3.3 Keypad Test key performance Maestro The Keypad test will determine if the buttons on the Magellan Maestro 4000/4040/4050 are functioning. 11.3.4 Video Test The Video test will test to determine if the screen is displaying colors properly. Chapter 11: System Status 11.4 Contact Us If you experience problems using your Magellan Maestro 4000/4040/4050, you can contact us at the numbers displayed. Chapter 12: Magellan Maestro Tools Installation The Magellan Maestro Tools application enables you to create custom POIs and load them onto your Magellan Maestro 4000/4040/4050. Additionally, you can load pictures and music onto an SD or MMC card (sold separately) to view or play anytime. See Using Removable Memory Cards on page 9. 12.1 Installing the Software Insert the Magellan Maestro Tools PC Application CD into your PCs CD drive. The setup application will begin automatically. If it does not, browse your computers CD drive and double-click on the setup.exe file. Select a default language for the Application. The Welcome screen will appear to begin the installation process. Choose a destination for the application. Select Next to use the default location, or select Browse to choose a custom destination. Next, choose a Program Folder to place the application icons. The Magellan Maestro Tools software will be installed. After it has finished installing, a dialog box pertaining to Microsoft DIgital Signatures may appear, select OK When it has finished, to can have the installer launch the application automatically, or deselect to exit without launching the application. Select Finish. Chapter 13: Magellan Maestro Music Manager The Magellan Maestro Music Manager enables you to transfer song files in MP3 or WMA format from your computer to an optional memory card (see Using Removable Memory Cards on page 9) installed in your Magellan Maestro 4000/4040/4050. The amount of music you can load depends on the size of the card. Insert the memory card into the memory card slot as show on page 9. Turn on your Magellan Maestro 4000/4040/4050 by pressing and holding the Power button for approximately 2-3 seconds if in sleep mode. (Ten seconds if not in sleep mode.) When the Warning screen appears, insert the small end of the USB cable into the USB port on your Magellan Maestro 4000/4040/4050 and the large end into an available USB port on your computer. Launch the Magellan Maestro Tools application. From the Magellan Maestro Tools screen, click on Music. The left side of the window shows the contents of your computer and the right side of the window shows the contents of the memory card installed in your Magellan Maestro 4000/4040/4050. Locate the song files you wish to load. When you have selected a file, the Transfer arrow will turn green. Click on the Transfer arrow to copy the file(s) to the memory card. In the same way, if you have loaded song files onto a memory card from another computer, you can copy the files from the memory card to your computer. When you have finished copying files, remove the USB cable from the Magellan Maestro 4000/4040/4050. Chapter 14: Music Player The Magellan Maestro 4000/4040/4050 Music Player enables you to play music files in MP3, or WMA format, stored on an optional memory card installed in your Magellan Maestro 4000/4040/4050. If you have not already done so, you must install the Magellan Maestro Tools application
(page 102) and transfer files onto the card using the Magellan Maestro Music Manager (page 103). You can also use a memory card that has been preloaded from a card reader. Press the MENU key on the Magellan Maestro 4000/4040/4050
(see page 5) and select the Music Player. The Music Player control pad will appear. 14.1 Single Song Play Select Browse Music Use the Navigation key or the Down arrow to select the song file you wish to play and press OK. The song will begin playing automatically. At the top of the screen is displayed the name of the song, the artist (if available), the selected play mode, the elapsed time, and the song duration. Press the Play/Pause button to suspend song play. To resume song play, press the Play/Pause button again. Press the Stop button to stop song play. Once a song has been stopped, pressing the Play/ Pause button will start the song from the beginning. 14.2 Multiple Song Play Multiple song play enables you to create a playlist. A playlist consists of one or more songs in a group that can be played continuously. Chapter 14: Music Player Select Playlist The Playlist menu will appear. To exit from the playlist menu, select ESC. 14.2.1 Play To hear a previously created playlist, select Play. Use the Up or Down arrow to select the desired playlist. Select OK. The songs will begin playing automatically in order. 14.2.2 Create To make a new playlist, select Create. Use the backspace key (<-) to erase the default name;
and the keypad to enter a new name for your playlist. When you have finished, select OK. The next screen to appear shows the song files stored on the memory card on the left side, and the playlist on the right side. Use the arrow buttons on the left side of the screen to highlight the Music folder and then, select List Files. Use the arrow buttons to highlight the song files you wish to add to the playlist. Select Add to Playlist (right arrow) to add the highlighted song to the playlist. Continue adding files to the playlist. When you have finished, select OK. 14.2.3 Modify Modify enables you to add or remove songs from the selected playlist. Select Modify. To remove a song from the playlist, use the arrow keys on the right side of the screen to highlight the desired song and then select Remove From Playlist (left arrow). Use the arrow buttons on the left side of the screen to highlight the song files you wish to add to the playlist. Select Add to Playlist (right arrow) to add the highlighted song to the playlist. Continue adding files to the playlist. When you have finished, select OK. 14.2.4 Delete To remove a playlist, select Delete. Select the playlist you wish to delete and select OK. A dialog box will appear asking to confirm your selection. Select Yes to delete the playlist. Chapter 14: Music Player 14.2.5 Rename If you want to change the name of a playlist, select Rename. Select the playlist you wish to rename and then, select OK. Use the backspace key (<-) to erase the name; and the keypad to enter a new name for your playlist. When you have finished, select OK. 14.3 Play Mode While in single song play, select Play Mode for song play options. Repeat All - Repeats all the songs in the current playlist starting at the beginning of the order. This function works only if there are two or more songs in the playlist. Repeat - repeats the song that is currently playing. Preview - Plays the first five seconds of each song in the current playlist. Normal - Plays all songs in the current playlist in order. Random - Plays the songs in the current playlist in random order. 14.4 List Songs Select List Songs to view the current playlist. Chapter 14: Music Player 14.5 Equalizer The Equalizer provides advanced sound options so you can customize the quality of the playback. The equalizer will only be available for MP3 format sound files. Select an equalizer preset from the following preconfigured options: Default (flat), Jazz, Classical, Rock, Techno, Dance Hall, Live, Full Bass, Full Treble, and Full Bass & Treble. You are not able to however, manually set the equalizer. Select the Equalizer Select the equalizer preset by pressing the button at the top of the screen When you are satisfied with your selection, select OK. To exit without setting the equalizer, select ESC. 14.6 Help Select Help for descriptions of the Music Player buttons. Chapter 15: Magellan Maestro Photo Manager The Magellan Maestro Photo Manager enables you to transfer image files in multiple formats from your computer to an optional memory card (see Using Removable Memory Cards on page 9) installed in your Magellan Maestro 4000/4040/4050. The number of images you can load depends on the size of the card. You can also use a memory card that has had images preloaded using a card reader. Insert the memory card into the memory card slot as show on page 9. Turn on your Magellan Maestro 4000/4040/4050 by pressing and holding the Power button for approximately 2-3 seconds (Ten seconds if the Magellan Maestro 4000/4040/4050 is not in sleep mode.) When the Warning screen appears, insert the small end of the USB cable into the USB port on your Magellan Maestro 4000/4040/4050, and the large end into an available USB port on your computer. Launch the Magellan Maestro Tools application. From the Magellan Maestro Tools screen, click on Photo. The left side of the window shows the contents of your computer and the right side of the window shows the contents of the memory card installed in your Magellan Maestro 4000/4040/4050. Locate the image files you wish to load. When you have selected a file, the Transfer arrow will turn green. Click on the Transfer arrow to copy the file(s) to the memory card. In the same way, if you have loaded image files onto a memory card from another computer, you can copy the files from the card to your computer. When you have finished copying files, remove the USB cable from the Magellan Maestro 4000/4040/4050. Chapter 16: Photo Viewer The Magellan Maestro Photo Viewer enables you to view image files in JPG and BMP format, stored on an optional memory card installed in your Magellan Maestro 4000/4040/4050. If you have not already done so, you must install the Magellan Maestro Tools application (page 102) and transfer files onto the card using the Magellan Maestro Photo Manager (page 103). Press the MENU key on the Magellan Maestro 4000/4040/4050
(see page 5). Select the Photo Viewer The Photo Viewer screen will appear. The Photo viewer will show the contents of the SD or MMC card installed in your Magellan Maestro 4000/4040/4050.. 16.1 View Single Photo The next screen to appear shows the file structure of the memory card. Select List Files Use the Navigation key or the Down arrow to highlight the photo you wish to view and select View. While viewing the image, double clicking on the image (that is tapping twice on the screen) will show the image in full screen. You can then cycle through the images by pressing left or right on the Navigation key. 16.1.1 Previous Image (left arrow) Press the right arrow button to view the previous image in the folder. This button is grayed out (not functional) when viewing the first image in the folder. 16.1.2 Zoom Press the Zoom button to reduce or enlarge the current photo. The top of the zoom menu shows the current zoom level. Select another zoom level from the list of presets. Select Best Fit to adjust the zoom to fit within the display boundaries; select Actual Size to display the image at 100%; select 25% to 150% to reduce or enlarge the image to the preset level. Chapter 16: Photo Viewer 16.1.3 Slideshow Press the Slideshow button to cycle through all the photos in the Pictures folder automatically. 16.1.4 Pan If you enlarge an image beyond the screen boundaries, press the Pan button to enable image scrolling. While enabled, you can drag the image in any direction to view other areas of the image. Press the Pan button again to disable Pan mode. 16.1.5 Rotate Image Press the Rotate Image button to rotate the image 90 counterclockwise, 90 clockwise, or 180. 16.1.6 Next Image (right arrow) Press the right arrow button to view the next image in the folder. This button is grayed out (not functional) when viewing the last image in the folder. 16.1.7 ESC Press ESC to return to the folder list. 16.2 Manage Photos 16.2.1 List View Press List view to show the files in a hierarchal list view. 16.2.2 Thumbnail Press Thumbnail to show the files as thumbnails. 16.2.3 Rename To change the name of the selected file or folder, press Rename. Use the backspace key (<-) to erase the name; and the keypad to enter a new name for your file. When you have finished, select OK. Chapter 16: Photo Viewer 16.2.4 Properties To view information on the selected file or folder, press Properties. A thumbnail of the image will be displayed along with the width and height in pixels, the size, and the format
(image type). When viewing the properties for folders, width, height, and format are not shown. Size shown is the combined size of all images in the selected folder. When you are finished viewing the properties, select OK. 16.3 Tools 16.3.1 Preferences General The General preferences, you can set the default file view to either thumbnail or file list view. Slideshow The slideshow preferences enable you to set the view properties, the sequence of photos, the transition between photos, and the duration between photos. Background The background preferences enable you to set the color of the background behind the photo being viewed. 16.3.2 Delete Files Use the arrow keys to select the file or folder you wish to delete. Press the Delete button (trash can). A dialog box will appear asking to confirm your selection. Select Yes to delete the file. 16.3.3 About This option will display the current version of the Photo Viewer software. Chapter 17: Magellan Maestro POI Manager The Magellan Maestro POI Manager enables you to transfer custom points of interest files from your computer to your Magellan Maestro 4000/4040/4050. Before we add any custom POIs to the Magellan Maestro 4000/4040/4050, you should understand how the POI Manager plots POIs. 17.1 Latitude 90 (North Pole) Latitude can be expressed by dividing Earth into horizontal segments totalling 180 degrees. Starting at the Equator, or zero degrees Latitude, lines
(or Parallels) are drawn in 10-degree increments 90 degrees to the north and 90 degrees to the south. If your location is below the Equator, 30 you are at a South Latitude. 20 10 0 0 10 20 30 40 17.2 Longitude Conversely, longitude lines can be expressed by dividing Earth into vertical segments totalling 360 degrees. Starting at the Prime Meridian (which is The Royal Observatory in Greenwich, England), or zero degrees Longitude, lines are drawn in 10-degree increments 180 degrees to the West and 180 degrees to the East. If your location is on the western hemisphere, you are at a West Longitude. Additionally, to narrow down your location further, each 10-degree segment is divided into 60 smaller segments called minutes and, still further, each minute is divided into 60 segments called seconds. To express this in coordinates, the city of Los Angeles is located at 34
(degrees) 03 (minutes) and 08 (seconds) North of the Equator, and 118
(degrees) 14 (minutes) and 42 (seconds) West of the Prime Meridian. Chapter 17: Magellan Maestro POI Manager 17.3 Altitude Each location can also have an Altitude. Altitude is expressed by how far the point is above or below the level of the ocean, or 100 Above Sea Level. For example, Los Angeles, California is about 300 80 Above feet above sea level. Death Valley, California is about 270 feet below sea level. 60 Above 40 Above 20 Above Sea Level 0 20 Below 40 Below 60 Below 80 Below 100 Below Turn on your Magellan Maestro 4000/4040/4050 by pressing and holding the Power button for approximately 2-3 seconds, 10 seconds if not in sleep mode (see Top View on page 6). When the Warning screen appears, insert the small end of the USB cable into the USB port on your Magellan Maestro 4000/4040/4050, and the large end into an available USB port on your computer. Launch the Magellan Maestro Tools application. From the Magellan Maestro Tools screen, click on POI. The left side of the window shows the contents of your computer and the right side of the window shows the contents of the Magellan Maestro 4000/4040/4050. 17.4 Opening a POI File When you start the POI Manager the contents of your My POIs folder will be displayed. This is the default location for storing custom POI files. Chapter 17: Magellan Maestro POI Manager Locate the POI files you wish to load. When you have selected a file, the Copy To Unit arrow will turn green. Click on the arrow to copy the file to your Magellan Maestro 4000/4040/4050. When you have finished copying files, remove the USB cable from the Magellan Maestro 4000/4040/4050. 17.5 Creating a New POI FIle There are two ways to create a POI file. You can either add POIs individually, or you can import a character delimited file containing the information need to plot the POIs. To plot a POI, each item must have a name, longitude, and latitude. Longitude and latitude must be in decimal format. 17.6 Adding Individual POIs Click on the New POI File Button to launch the POI Editor. Click on the Add button
. Enter the Name, the Latitude, and the Longitude. The Altitude and Description fields are optional. Chapter 17: Magellan Maestro POI Manager Select the Category field and select New. A dialog box will appear to create a new POI category. Enter the Name and assign an Image (icon) for the POI. The Description field is optional. The Alert feature is an audible alarm that lets you know when you are within a certain distance from the POI. You can set an initial reminder
(Distance 1), a secondary reminder (Distance 2). Distance 1 Distance 2 Select your preferred unit or measure (Meters or Feet). The Detection angle sets the range of alert in degrees from the POI. Select Activate alert for this category to enable the alert settings. When you have finished, select OK. Chapter 17: Magellan Maestro POI Manager 17.7 Importing a Data FIle The POI Manager software supports ASCII file format (.ASC,.CSV,.TXT); GPS Exchange file format (.GPS,.XML); Magellan Waypoint file format
(.WPT,.RTE); and Garmin PCX5 Waypoint file format (.WPT,.RTE). Click on the Open button Select the file you wish to import and click Open. Start by choosing which line in the data file to start importing data. If your data file has a header row, this row will generate an error so you should start at line two or below. Next, choose how the data is separated and click on Next. You now need to define the data columns. Click on the pull down menu and assign a field name to the appropriate column. Click on Finish. Click on The Save POI file button. Assign a name to your file and click on Save. Close the POI File Editor. Select the POI file you just created and click on the transfer button (right arrow) to upload the file to your Magellan Maestro 4000/4040/4050. See page 55 for information on accessing custom POIs on your Magellan Maestro 4000/4040/4050. Appendix POI Categories The Magellan Maestro 4000/4040/4050 POI database has 37 different categories. The icons will appear on the Map screen (if enabled):
Restaurant Bank/ATM Gas Station Fast food, diners, and food marts Most financial services Most fuel services Roadside Assistance Towing companies Hospital/Polyclinic Most medical services Vehicle Services Repair shops, tire stores, and oil changes Airport Camping & RV Car Rental Casino City Center Clothing International and Municipal airports Campgrounds, camping areas, and RV parks Car rental companies Gambling venues The geographical center of a selected city Clothing retail stores Convention Center Education Emergency Services Major Convention Centers Schools, Colleges, and other learning institutions Police, FIre, and Emergency Rooms Entertainment Movie theaters, live performance venues Golf Course Grocery Store Hair & Beauty Health Care Private and public courses Major chains and local markets Salons and beauty parlors Doctors offices and pharmacies Home & Garden Nurseries and do-it-yourself centers Hotel or Motel Most overnight stay locations Marina Docks and harbors Misc. Services Other services not categorized Nightlife Dance halls, pubs, nightclubs Open Parking Area Parking lots and garages Appendix Parks Professional Services Public Buildings Rest Area Shopping Ski Resorts County, regional, and local parks Business office locations Libraries, museums, and government buildings Rest stops along major highways Malls and other retail stores Most major ski resorts Sports & Recreation Stadiums, parks, lakes Tourist Attraction Places most visited by tourists Transportation Bus and train stations Winery Worship Vinyards and tasting locations Churches, temples, mosques When selecting restaurants, you can further narrow the search by cuisine type such as French, Italian, Greek, Mexican, etc. Appendix Specifications DImensions: 3.8" x 4.8" x 1.4" 9.6cm x 12.2cm x 3.5cm Weight: 8.64 oz. 245 g Display: 3.5 color touch screen display, 2.11 x 2.81 (53.64mm x 71.52mm) Screen Resolution: 320 x 240 QVGA; 64,000 colors Accepted Card Media: Secure Digital (SD) or Multimedia Card (MMC) Audio:
Integrated Speaker with integrated stereo headphone jack GPS Antenna: Integrated with optional external antenna connection Battery:
2100mA LI-ION USB Interface: 1.0 Operating Temperature: 32F to 104F 0C to +40C Storage Temperature: -4F to 158F -20C to
+70C Humidity: 50% 20% ambient room PC Requirements IBM Compatible PC, Pentium or higher x x Microsoft WIndows 2000 or XP 128 MB RAM x CD Drive for Software Installation x DVD Drive for Map Upgrades USB Port Appendix GPS Status Screen GPS STATUS Screen Structure-first page CH 01 02 03 04 05 06 07 08 09 10 11 12 PRN AZ d2 d1 d1 d2 d2 d1 d2 d1 d1 d2 d2 d1 d2 d1 d1 d2 d2 d1 d2 d1 d1 d2 d2 d1 EL d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 d3 SNR U/N d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 d4 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 c1 13 14 d1 d1 d2 d2 d3 d3 d4 d4 c1 c1 It is ordered by the channel number from 1 to 12. Where:
d1: Satellite PRN number, with e or E to the right means got ephemeris data, v or V to the right means got verified ephemeris data (double check). E or V also means got satellite time for this channel. d2: Azimuth, in degrees d3: Elevation angle, in degrees d4: SNR (signal to noise ratio), it is ratio-Hz, not dB unit c1: U Used for position fix, U Not used for position fix Bad fix code 0 PVT_OK :good fix 2 ILLEGAL_ALT: illegal altitude < -10km or >
17.5km 4 POSITION_JUMP: too big position jump between two epoch
(300 miles) 5 ILLEGAL_VELOCITY_OR_ALT: max velocity 951mile 7 TOO_BIG_ACCELERATION max 15m around 1.5g 8 TOO_SMALL_ALTITUDE -10000 m 9 TOO_BIG_ALTITUDE 17,500 m 10 TOO_BIG_PDOP max PDOP 50 11 SATS_BELOW_MASK_ANGLE satellite elevation angle is below mask angle 16 ILL_DEFINED_3D_MATRIX 3X3 matrix can not be inverted in 3D fix Appendix 17 ILL_DEFINED_2D_MATRIX 2X2 matrix can not be inverted in 2D fix 20 NO_SAT_TIME no satellite time 23 NOT_ENOUGH_SATS no enough satellite for 2D or 3D fix 24 CANNOT_SELECT_FIX_TYPE 30 VELOCITY_2D_ONLY 2 satellite fix only for velocity, no position fix 31 BAD_VELOCITY_PDOP 50 too big pdop for velocity 32 TOO_MANY_SATS_FOR_2D_VEL there are 4 or more satellites, but 2D fix provided 51 WRONG_NUMSAT number of satellite for fix > 12 or less 2 56 LOOP_3D_NOT_CONVERGING 3D initial fix is not convergent 57 MILLISECOND_ERROR millisecond jump happened 58 LOOP_2D_NOT_CONVERGING 2Dinitial fix is not convergent 59 BAD_RANGE_CHITEST; range post-fix residuals chi-test failed 60 BAD_DOPPLER_CHITEST doppler post-fix residuals chi-test failed 61 OSC_DRIFT_ERR too much clock drift 60HZ for XO, 7.5HZ for TCXO 62 BAD_DOPPLER_ERR too big Doppler errors 4m/s 63 BIG_RANGE_RESID 110m/40m depend on virtual ttagl/ DGPS factors 64 BIG_DOPPLER_RESID 0.7m/s 65 HUGE_RANGE_RESID 10km normal for postfit residuals for range 66 HUGE_DOPPLER_RESID 100m/s normal for postfit residuals for doppler Usually, Bad code is 20 and 23. If fix is good, it would be 0. GPS STATUS Screen Structure - second page Heading XXX (degree) Speeding XX.X (meter per second) Current Lat: DDD.DDDDD W/E (current latitude, degree) Current Long: DDD.DDDDD N/S (current longitude, degree) Current altitude XXXX (altitude in mean sea level meter) TTFF XXXXs (Time-To-First-Fix in second)
#Satellite (U/T) XX/XX (the number of satellite used and tracked)
(Position Dilution Of Precision)
(Vertical Dilution of Precision)
(Time Dilution of Precision) PDOP XX.X VDOP XX.X TDOP XX.X HDOP XX.X (Horizontal Dilution of Precision) FOMS P/V/H (Figures Of Merits for position, velocity and heading in map matching) UTC TIME MM/DD/YY HH:MM:SS(UTC time without local zone) Appendix Typical GPS STATUS Screen Display First Page CH 01 02 03 04 05 06 07 08 09 PRN 27V 03E 13e 20e 31v 01V 28V 08V 02V AZ 311 078 079 175 119 120 220 282 046 EL 54 29 81 06 34 53 13 29 27 SNR 334 135 204 90 179 316 152 182 173 U/N U U U N U U U U N 10 11 12 13 14 84 10 72 134 122 255 325 105 255 105 12 06 13 12 13 0 47 34 50 63 N N N N N Second Page Heading 0 Speed 0.0 m/s Current Lat: 34.10939 N Current Long:117.82599 W GPS Version: Current altitude 255 TTFF 116s
#Satellite (U/T) 11/12 PDOP 2.3 VDOP 1.7 TTFF 0.0 HDOP 1.3 FOMS P/V/H 2 UTC TIME 08/16/2004 22:56:53 Appendix Frequently Asked Questions Why is my street not showing up on the map?
The Magellan Maestro 4000/4040/4050 uses the most current available map data. Chances are, your street is in a new housing development or the street is new. Map updates may be made available once per year. I know there is a gas station on this street corner, why is there not icon for it on the map?
Check your POI settings and make sure you have the necessary POI checked to make it visible on the map. See POI Selection on page 55. The Magellan Maestro 4000/4040/4050 uses the latest POI data available. Chances are the POI you are looking for is relatively new and has not been added to the database. If this is not the case, it may have been overlooked or changed since the POI database was created. You can add custom POIs to your Magellan Maestro 4000/4040/4050 to make up for those you route to often. See Chapter 17: Magellan Maestro POI Manager on page 112., and Custom POIs on page 55. The GPS signal is weak. Whats going on?
You may be driving through an area that has tall buildings or trees, or a canyon, or a tunnel. These conditions may interfere with satellite signals. Wait a few moments and the signal should get better as more satellites are acquired. If the problem persists, there may be a problem with the antenna. Contact Technical Support. Why is an address I know I routed to not in the Previous Destinations list?
The Previous Destinations list stores the last 50 places you routed to. When you get to number 51, the first destination on the list is removed and each successive destination is moved up. Can I play MP3s and Route at the same time?
No Can I import a play list from Windows Media Player?
No. The Music Player does not support playlists from other applications. Can I use any third party SD/MMC card with the Magellan Maestro 4000/4040/4050 The Magellan Maestro 4000/4040/4050 is compatible with most major brands of SD/MMC card.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-04-24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2007-02-12 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2007-04-24
|
||||
1 2 |
2007-02-12
|
|||||
1 2 | Applicant's complete, legal business name |
Mitac Digital Technology Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0022217111
|
||||
1 2 | Physical Address |
No.200, Wen Hwa 2nd Rd.,Kuei Shan Dist.
|
||||
1 2 |
Taoyuan, N/A 33383
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@ATCB.com
|
||||
1 2 |
h******@atcb.com
|
|||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
P4Q
|
||||
1 2 | Equipment Product Code |
2007VEN3001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
R******** C******
|
||||
1 2 | Title |
Director
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
R******@mic.com.tw
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Compliance Certification Services (KunShan) Inc.
|
||||
1 2 |
Compliance Certification Services (KunShan), Inc.
|
|||||
1 2 | Name |
M******** C******
|
||||
1 2 | Physical Address |
No. 10 Weiye Rd., Innovation Park
|
||||
1 2 |
No. 10 Weiye Rd.
|
|||||
1 2 |
KunShan, JuangSu, 215300
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86 51********
|
||||
1 2 |
+86 5********
|
|||||
1 2 | Fax Number |
86 51********
|
||||
1 2 |
+86 5********
|
|||||
1 2 |
l******@cn.ccsemc.com
|
|||||
1 2 |
m******@cn.ccsemc.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth GPS Receiver | ||||
1 2 | Bluetooth GPS Receiver with Camera | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output is Conducted. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance | ||||
1 2 | Power Output is Conducted. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services (Kunshan) Inc.
|
||||
1 2 |
Compliance Certification Services (KunShan) Inc.
|
|||||
1 2 | Name |
E****** L********
|
||||
1 2 |
K****** C****
|
|||||
1 2 | Telephone Number |
86-51********
|
||||
1 2 |
88633******** Extension:
|
|||||
1 2 | Fax Number |
86-51********
|
||||
1 2 |
88633********
|
|||||
1 2 |
e******@tw.ccsemc.com
|
|||||
1 2 |
k******@tw.ccsemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2402.00000000 | 2480.00000000 | 0.0020000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 20 | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC