FCC ID: P4Q-EZD580 Protable Navigator

Users Manual R00 Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Note The information in this manual is subject to change without notice. Table of Contents 1 Getting Started..................................................................................1 1.1 Understanding Hardware Components................................................ 1 Front Components ............................................................................... 1 Back Components................................................................................ 2 Right-side Components........................................................................ 2 Top Components.................................................................................. 3 Bottom Components ............................................................................ 3 1.2 Performing the Initial Start Up.............................................................. 4 1.3 Using Your Device in a Vehicle............................................................ 5 Using the Device Holder ...................................................................... 5 Connecting the Car Charger ................................................................ 5 Connecting the TMC Antenna.............................................................. 6 1.4 Operating Basics.................................................................................. 7 Turning On and Off .............................................................................. 7 Navigating on the Screen..................................................................... 7 Home Screen ....................................................................................... 7 Inserting a SD/MMC Card.................................................................... 9 1.5 2 Pictures............................................................................................11 2.1 Starting and Exiting Pictures.............................................................. 11 2.2 Preparing the Pictures for Your Device.............................................. 11 2.3 Viewing Pictures in Thumbnail View .................................................. 12 2.4 Viewing a Picture in Full Screen ........................................................ 12 2.5 On-Screen Control Buttons................................................................ 13 2.6 Viewing the Slideshow ....................................................................... 15 3 Settings............................................................................................17 3.1 Starting and Exiting Settings.............................................................. 17 3.2 Backlight............................................................................................. 18 3.3 Volume ............................................................................................... 19 3.4 Screen................................................................................................ 20 3.5 Power ................................................................................................. 21 3.6 Date&Time ......................................................................................... 22 i 3.7 Change Language.............................................................................. 23 3.8 Bluetooth ............................................................................................ 24 4 Bluetooth HF Phone .......................................................................25 4.1 About Bluetooth HF Phone ................................................................ 25 4.2 Pairing with a Mobile Phone............................................................... 25 4.3 Placing a Call ..................................................................................... 28 Keypad ............................................................................................... 28 Call History......................................................................................... 28 4.4 Operations during a Call .................................................................... 29 4.5 Receiving a Call ................................................................................. 30 4.6 Miscellaneous Buttons ....................................................................... 30 Connect.............................................................................................. 31 Pair Mode........................................................................................... 31 Bluetooth Manager............................................................................. 32 Exit ..................................................................................................... 32 5 Bluetooth Manager .........................................................................33 5.1 About Bluetooth Manager .................................................................. 33 5.2 Starting and Exiting Bluetooth Manager ............................................ 33 5.3 Turning On/Off Bluetooth Radio......................................................... 34 5.4 Exploring Devices .............................................................................. 35 5.5 Using My Shortcuts ............................................................................ 37 5.6 Viewing Active Connections............................................................... 38 5.7 Configuring Bluetooth Settings........................................................... 39 6 ActiveSync ......................................................................................41 6.1 About ActiveSync ............................................................................... 41 Installing ActiveSync .......................................................................... 41 Using ActiveSync ............................................................................... 42 7 Troubleshooting and Maintenance ...............................................43 7.1 Reset and Restart .............................................................................. 43 Reset Your System ............................................................................ 43 Restarting Your Device ...................................................................... 44 7.2 Troubleshooting ................................................................................. 44 Power Problems................................................................................. 44 Screen Problems................................................................................ 44 Connection Problems......................................................................... 45 GPS Problems.................................................................................... 45 7.3 Maintaining Your Device .................................................................... 45 ii 8 Regulatory Information ..................................................................47 8.1 Regulations Statements ..................................................................... 47 European Notice ................................................................................ 47 8.2 Safety Precautions ............................................................................. 49 About Charging .................................................................................. 50 About the Charger.............................................................................. 50 About the Battery ............................................................................... 50 Additional Information ........................................................................ 51 iii Warnings and Notices

For your safety, do not operate the controls of the product while driving.

Use this product with caution. The product is a navigation aid. It does not provide exact measurements of direction, distance, location or topography.

The calculated route is for reference only. Always follow the posted traffic signs, speed limits and road restrictions.

When you leave your car, do not leave your device on the dashboard in direct sunlight. This can cause the battery to overheat and malfunction.

The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its performance. Any change to the GPS system can affect the accuracy of all GPS equipment world-wide.

GPS satellite signals cannot typically pass through solid materials (except glass). GPS location information is not typically available inside buildings, tunnels, or underground parking lots.

A minimum of 4 GPS satellite signals is needed to calculate your GPS position. Signal reception can be affected by weather events or overhead obstacles (e.g. dense foliage and tall buildings).

Other wireless devices in the vehicle may interfere with the reception of satellite signals and cause the reception to be unstable. v

A device holder is needed when using the device in a car. Be sure to place the device in an appropriate place, so as not to obstruct the drivers view, or deployment of airbags. Do not mount where the drivers field of vision is blocked. Do not place on the dashboard unsecured. Do not mount in front of airbag panels. Do not mount in front of an airbag field of deployment. vi 1 Getting Started 1.1 Understanding Hardware Components NOTE: Depending upon the specific model purchased, the color of your device may not exactly match the device shown in this manual. Front Components Ref Component

Touch Screen Displays the output of your device. Tap the screen with your Description stylus to select menu commands or enter information. Flashes in blue to indicate that Bluetooth is on.

Bluetooth Indicator

Charge Indicator

Microphone Glows bright amber to indicate that the battery is charging, and turns green when the battery is fully charged. For Bluetooth hands-free calling. 1 Back Components Ref Component

Speaker

Stylus Description Sends out music, sounds and voice. Tap the touch screen to make selections and enter information. Pull the stylus out of its slot to use it, and store it in the slot when not in use. Right-side Components 2 Description Component Turns on and off the device. Ref

Power Button

Navigation Button Starts the navigation software.

Volume Control Top Components Adjusts the volume level of your device. Ref Component

SD/MMC Slot

External Antenna Connector Description Accepts a SD (Secure Digital) or MMC (MultiMediaCard) card for accessing data such as pictures. This connector (under rubber dust cover) allows use of an optional external GPS antenna with magnetic mount, which may be positioned on top of the car for better GPS signal reception in areas with poor reception. Bottom Components Ref Component

ON/OFF Switch

Headphone Description The main power/battery cutoff switch. Connects to stereo headphones. 3

Mini-USB Connector Connects to the charger or USB cable.

Reset Button Restarts your device (soft reset). 1.2 Performing the Initial Start Up 1. Using a pointed pen, slide the ON/OFF switch to the ON position. CAUTION: Always leave the ON/OFF switch in the ON position for normal operation 2. Your device turns on. 3. The Home screen appears. You can now use your device. 4 1.3 Using Your Device in a Vehicle Using the Device Holder CAUTION:

Select an appropriate location for the device holder. Never place the holder where the drivers field of vision is blocked.

If the cars windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable Use the device holder to fix your device in a vehicle. Make sure that the GPS antenna has a clear view of the sky. Connecting the Car Charger The car charger supplies power to your device when you are using the device in a car. 1. Connect one end of the car charger to the power connector of your device. 2. Connect the other end to the cigarette lighter in the car to power and charge your device. The indicator on the car charger lights in green to indicate that power is being supplied to your device. CAUTION: For optimal performance of the lithium battery:

Do not charge the battery where the temperature is high (e.g. in direct sunlight). 5

There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged.

When storing the product for a long period of time, be sure to fully charge the battery at least once every two weeks. Over discharge of the battery can affect the charging performance. NOTE: Your device can also be charged when it is connected to a desktop computer via the USB cable. If you intend to charge your device in this way, turn off your device so that it takes less time to charge the battery. Connecting the TMC Antenna TMC antenna allows you to receive radio transmissions that are used to inform drivers of traffic, weather, and other driving conditions. TMC information is monitored by the navigation software. Once the information is received, you can view it on your device and traffic icons will appear in the map view. Certain roads with reported traffic will be highlighted and you can choose to avoid those roads and an alternate route will be automatically calculated. (See the navigation software manual for detailed information.) 6 1.4 Operating Basics Turning On and Off For normal operation, turn off the device by briefly pressing the power button. The device enters a suspended state. When you next briefly press the power button, the system resumes. You will either be back to where you left off or see the Home screen. Navigating on the Screen To operate your device, touch the screen with your stylus. You can perform the following actions:

Tap Touch the screen once with your stylus to open items or select onscreen buttons or options.

Drag Hold your stylus on the screen and drag up/down/left/right or across the screen.

Tap and hold Tap and hold your stylus until an action is complete, or a result or menu is shown. Home Screen The first time you initialize your device, the Home screen appears. The Home screen is your starting place for various tasks. Tap a button to start a task or open another menu. 7 Button Name Navigation Description Starts the navigation software. Pictures Settings Displays pictures (.jpg, .gif, and .bmp formats). Customizes the system settings. For Detailed Information See the manual supplied with the software. Chapter 2 Chapter 3 8 Inserting a SD/MMC Card 1.5 Your device has a SD/MMC slot where you can insert an optional Secure Digital or MultiMediaCard storage card. To use a SD/MMC card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device. To remove a card, first make sure that no application is accessing the card, then slightly push the top edge of the card to release it and pull it out of the slot. NOTE:

Make sure that no foreign objects enter the slot.

Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are not using it. 9 2 Pictures 2.1 Starting and Exiting Pictures Pictures allows you to view pictures in JPEG, GIF and BMP formats and view the slideshow of the pictures on your device. Tap the Pictures button on the Home screen to start the program.

. To exit the program, tap 2.2 Preparing the Pictures for Your Device Before using the program, have the JPEG/GIF/BMP files ready on either your devices flash memory or on a storage card. Use ActiveSync to copy files from your computer to the correct location. (See Chapter 6 for information.) 11 2.3 Viewing Pictures in Thumbnail View 1. If your files are in a storage card, insert the card into your device. 2. Tap the Pictures button on the Home screen to start the program. 3. The program will search the matching files in the specific folder on your device and in all folders on a storage card. It then displays the pictures in the thumbnail view. You can press the Up or Down arrow button to go to next or previous page. A frame indicates the picture is selected. Selected file/

Total number of files Page up Page down Exit Delete the selected picture. Open the selected picture. 2.4 Viewing a Picture in Full Screen When you tap a picture twice in the thumbnail view, the picture is displayed in full screen. Start the slideshow. Previous Next 12

. To go back to the thumbnail view, tap anywhere on the screen to display the control buttons and then tap 2.5 On-Screen Control Buttons On-screen control buttons provide various functions and settings. Tap anywhere on the picture to display the buttons as shown below. To close the buttons, tap the picture again. Name Slideshow Interval Description Starts the slideshow. (See section 2.6 for detailed information.) Sets the length of time each slide is displayed before moving on to the next slide. Tap the button to switch to the next available option. 1 second 3 seconds 5 seconds Information Enables or disables the displaying of the name and date of the file. Control Button 13 Delete Zoom Deletes the current picture. Opens the zoom bar. Tap the button as many times as needed to zoom in to 1.2x, 1.5x, 1.8x, or 2.0x. When you have zoomed in the picture, you can drag the picture to view other parts of the picture. To close the zoom bar, tap

. Goes back to the thumbnail view. Back 14 2.6 Viewing the Slideshow To view the slideshow of all your pictures, use one of the following ways:

When in the thumbnail view, tap to start the slideshow.

When in full screen, tap anywhere on the picture to display the on-screen control buttons. Then tap to start the slideshow. A small triangle at the lower left corner of the screen indicates that the slideshow is on. To stop the slideshow, tap anywhere on the screen. 15 3 Settings 3.1 Starting and Exiting Settings You can customize the system settings such as backlight brightness, volume, and language. Once you change the settings, the new settings will remain until you change them again. Tap the Settings button on the Home screen. The Settings menu appears as shown below.

To exit Settings, tap

. The following sections describe the various buttons and their functions. 17 3.2 Backlight 1. Tap the Settings button on the Home screen. 2. Tap the Backlight button. 3. Move the knob along the track bar to adjust the brightness of the backlight. To darken the backlight, move the knob to the left. To lighten the backlight, move the knob to the right. to save the changes. 4. Tap 18 3.3 Volume 1. Tap the Settings button on the Home screen. 2. Tap the Volume button. 3. Move the knob along the track bar to adjust the volume. To decrease the volume, move the knob to the left. To increase the volume, move the knob to the right. save the changes. 4. Tap 19 3.4 Screen You can calibrate the touch screen if it is not responding accurately to your taps. 1. Tap the Settings button on the Home screen. 2. Tap the Screen button. 3. Tap to start the calibration. 4. Tap and hold the centre of the target. 5. When the target moves to another position, tap and hold the centre of the new target. Repeat each time to complete the calibration process. 6. When completed, tap

. 20 3.5 Power To check the remaining power level of your battery and/or set up the power saving feature:

1. Tap the Settings button on the Home screen. 2. Tap the Power button. 3. The screen shows the remaining power of your battery. You can set a timer to automatically turn off your device when it is idle for a set period of time. The options include Never, 30 minutes, 20 minutes, and 10 minutes. to save the changes. 4. Tap 21 3.6 Date&Time 1. Tap the Settings button on the Home screen. 2. Tap the Date&Time button. 3. To change the time zone, tap the left/right arrow in the Time Zone item. 4. To change the date, tap the down arrow in the Date item. A calendar pops up. Tap the left arrow on the calendar to go to the earlier month and year or the right arrow to the later month and year. Alternatively, you can tap the month or year on top of the calendar to directly change the month or year. When the calendar shows the current month, tap the date on the calendar. 22 5. To set the time, first tap the hour, minute, or second in the Time item and then tap the up arrow to increase or down arrow to decrease the value. 6. Tap to save the changes. 3.7 Change Language 1. Tap the Settings button on the Home screen. 2. Tap the Change Language button. 3. Tap the left/right arrow button to select the desired language. 23 to save the changes. 4. Tap 3.8 Bluetooth 1. Tap the Settings button on the Home screen. 2. Tap the Bluetooth button. 3. See the next two chapters for detailed information on using Bluetooth connectivity. 24 4 Bluetooth HF Phone 4.1 About Bluetooth HF Phone Your device can serve as a hands-free (HF) device for a Bluetooth mobile phone. After establishing the Bluetooth connection, you can tap your device to place and receive phone calls instead of picking up the mobile phone, and can use the built-in speakers and microphone for your conversation. 4.2 Pairing with a Mobile Phone 1. Tap the Settings button on the Home screen and then the Bluetooth button. The Bluetooth radio turns on. NOTE: The below procedure describes the scenario when you initiate the Bluetooth connection from your mobile phone. You can also initiate the Bluetooth connection from your device. (See section 5.4 for information.) 2. When the Keypad screen appears, you can dial a phone number. The connection with a Bluetooth mobile phone is required. (See the following steps for information.) Or, you can tap to go to the Bluetooth HF Phone main screen. 25 3. If this is the first time you use the program, your device will switch to Pair Mode and wait for the pairing action from your mobile phone for 60 seconds. The connection will be established as long as you initiate the pairing process on your mobile phone within this period. 4. If prompted to enter the passkey, tap the passkey specified by the mobile phone and tap

. 5. You will see the Bluetooth HF Phone main screen after the pairing is completed. The status bar at the bottom shows the name of the mobile phone connected. 26 Keypad Pair Mode Reconnect Call History Exit (Minimize) Bluetooth Manager The next time you run the program, your device will automatically search and pair with one of the last connected mobile phones. NOTE:

Your device must be in Pair Mode for the mobile phone to discover your device. If you need to manually set your device to Pair Mode, tap Pair Mode on the main screen.

Some mobile phones can automatically connect the hands-free service.

Up to 8 sets of paired mobile phones can be stored. A 9th paired mobile phone will replace the oldest one.

The Bluetooth HF Phone program cannot access the data such as the phone book and call history stored in a connected mobile phone. 27 4.3 Placing a Call After pairing with your mobile phone, you can place a call using the Keypad or Call History button on the Bluetooth HF Phone main screen. Keypad By tapping the you can enter the telephone number with the onscreen keypad. After entering the telephone number, tap Keypad button on the Bluetooth HF Phone main screen, to place the call. Call History NOTE:

International calls require a country code to be included in the phone number. On your device, the country code is separated from the rest of the number sequence by a plus (+) sign. If you are making an international call, tap and hold the * key until the + sign appears.

To delete the last digit entered, tap the Backspace button. Call History NOTE: Bluetooth HF Phone cannot access the call history stored in a connected mobile phone. Tap the display the recent incoming, outgoing, or missed calls together with information such as date, time, and duration of each call. Call History button on the Bluetooth HF Phone main screen to 28 Tap the respective button (incoming missed

) to view the last 20 calls of the selected type.

, outgoing

, or With an item selected, you can tap delete the item. to dial the number or to To clear all items in the current list, tap 4.4 Operations during a Call

. During a phone call:

If you need to input other numbers, such as an extension number, tap to open the keypad and tap the digits. The keypad will close when you tap the button again or when there has been no input for 5 seconds.

Tap to mute your sound so that the other party cannot hear you. To end the mute mode, tap the same button again. 29

Tap to end the call.

Tap to switch the call to your mobile phone. To switch back to your device, tap the same button again. 4.5 Receiving a Call When you have a call after pairing with a mobile phone, the device rings and displays the Incoming Call screen. To accept the call, tap To reject the call, tap

. To mute the ring tone before receiving or rejecting, tap 4.6 Miscellaneous Buttons In addition to buttons for placing a call, there are Connect, Pair Mode, Bluetooth Manager, and Exit buttons on the Bluetooth HF Phone main screen as described below. 30 Connect By tapping the you can manually search the last paired mobile phones for an available connection. Connect button on the Bluetooth HF Phone main screen, Pair Mode Pair Mode button on the Bluetooth HF Phone main screen, By tapping the you can manually set your device to Pair Mode. Within the duration of 60 seconds, you can initiate the pairing process on your mobile phone to discover your device as a hands-free device. 31 Bluetooth Manager Bluetooth Manager button on the Bluetooth HF Phone main By tapping the screen, you can run the Bluetooth Manager program. (See Chapter 5 for information on Bluetooth Manager.) Exit To hide the Bluetooth HF Phone screen, tap the Bluetooth HF Phone main screen. Bluetooth HF Phone is still running in the background Exit button on the NOTE: To know how to turn off Bluetooth radio, see section 5.3. 32 5 Bluetooth Manager 5.1 About Bluetooth Manager Your device incorporates Bluetooth wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters (30 feet) without requiring a physical connection. Bluetooth Manger allows you to configure and use the Bluetooth capabilities of your device. 5.2 Starting and Exiting Bluetooth Manager 1 Tap the Settings button on the Home screen and then the Bluetooth button. 2 When the Bluetooth HF Phone screen appears, tap

. 33 3 The Bluetooth Manager screen appears as shown below. Exit Bluetooth Settings 4 To exit the program, tap Phone screen. Turn off Bluetooth radio. Active Connections

. You will be back to the Bluetooth HF 5.3 Turning On/Off Bluetooth Radio Whenever you start Bluetooth Manager, Bluetooth radio is turned on. The Bluetooth indicator on your device flashed in blue. Exiting Bluetooth Manager doesnt turn off Bluetooth radio. To turn off Bluetooth radio, tap indicator goes off. in the Bluetooth Manager screen. The flashing Bluetooth 34 5.4 Exploring Devices NOTE: To use the service of a remote device with Bluetooth capability, make sure that the remote device is in discoverable mode. 1 Start Bluetooth Manager as described in section 5.2. 2 Tap Explore a Bluetooth Device to search for nearby devices. 3 The device list appears on the screen. Tap the target device and tap to browse the services of the device. button to pair with the selected device before NOTE: You can also tap the browsing its services. 4 Tap the service you want to use. 35 5 When prompted to enter the passkey, tap the passkey requested by the target device and tap

. NTOE: Once you have established a Bluetooth connection with a remote device, it will be saved as a shortcut. You can then use My Shortcuts to conveniently use the same service again. (See section 5.6 for information.) 36 5.5 Using My Shortcuts Once you have established a Bluetooth connection with a remote device, it will be saved as a shortcut. My Shortcuts allows you to conveniently use the same service again by tapping the particular shortcut item. 1 Start Bluetooth Manager as described in section 5.2. 2 Tap My Shortcuts. 3 Tap the desired item and tap to establish a connection again. 37 5.6 Viewing Active Connections After starting Bluetooth Manager, tap After you tap an item, you can tap to view the active connections. to disconnect the selected device. 38 5.7 Configuring Bluetooth Settings After starting Bluetooth Manager, tap to configure Bluetooth settings. The available options are:

Other devices can discover me

Allow other devices to connect

Share this Folder Tap to specify the folder to share with the remote device. NOTE: When you transfer picture files to your device via Bluetooth connection, the files are transferred to this shared folder. Unless the files are in the correct location for the Pictures program, the Pictures program cannot detect them. to save any changes you have made. Tap 39 6 ActiveSync 6.1 About ActiveSync ActiveSync allows you to establish the connection between your device and computer. CAUTION: During ActiveSync installation, do not connect your device to your computer before the message on the screen asks you to. Installing ActiveSync 1 Turn on your computer and your device. 2 Insert the provided DVD into the DVD drive of your computer. The auto run screen appears. 3 Click the Install button in the ActiveSync section. The installation wizard will start automatically. Follow the onscreen instructions to finish the installation. A status window indicates the progress of the installation. 4 When prompted, connect the mini-USB end of the USB cable to your device and the other end to a USB port on your computer. 41 5 When the Set up partnership screen appears, select No and Next to connect as a guest device. NOTE: This device does not support synchronization with your computer. Therefore, you do not need to set up a partnership. Using ActiveSync Once ActiveSync is installed on your computer, you can use it to transfer files

(i.e.pictures files) between your device and your computer. CAUTION: Be discreet when you delete files from your device. Deleting files of which the function is unknown can cause programs or features to malfunction. Whenever you connect your device to your computer with the USB cable, the Set up partnership screen appears. Always select No and Next to connect as a guest device. Then you can use the Explorer function to browse the mobile device and transfer data. (See the ActiveSync online Help for instructions on copying files.) 42 Troubleshooting and Maintenance 7 Troubleshooting and Maintenance 7.1 Reset and Restart Reset Your System Occasionally, you may need to reset your device. For example, you should reset your system when it stops responding; or appears to be frozen or locked up. You can use the following steps to perform a hard reset. 1. Disconnect all cables, including the charger, from your device. 2. Use a pointed pen to slide the ON/OFF switch to the OFF position. 3. Wait for 1 minute and then slide the switch back to the ON position. Wait for 1 minute. 43 Restarting Your Device To restart your device, press the power button for 1 second until the Power Off Selection screen appears and then tap Restart. 7.2 Troubleshooting NOTE: If you encounter a problem you cannot solve, contact an authorized service center for assistance. Power Problems Power does not turn on when using battery power

The remaining battery power may be too low to run your device. Charge the battery. Screen Problems Screen responds slowly

Make sure that your device is not running out of battery power. If the problem still exists, reset your system. Screen freezes

Reset your system. Screen is hard to read

Make sure that the backlight of the display is on.

Move to a location with more light. Inaccurate response to taps

Recalibrate the touch screen. 44 Connection Problems Cable Connection Problems

Make sure that your device and your computer are both turned on before trying to establish a connection.

Make sure that the cable is securely plugged into the USB port on your computer and on the device. Connect the USB cable directly to your computerdo not run the cable through a USB hub.

Reset your device before connecting the cable. Always disconnect your device before you restart your computer. GPS Problems

When there are no valid signals available, consider the following:

Make sure that the GPS antenna has a clear view of the sky.

Note that the GPS reception can be affected by:

Bad weather

Dense overhead obstacles (e.g. trees and tall buildings)

Other wireless device in the car

Reflective car window tint 7.3 Maintaining Your Device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device.

Keep your device away from excessive moisture and extreme temperatures.

Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time.

Do not place anything on top of your device or drop objects on your device.

Do not drop your device or subject it to severe shock.

Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your 45 device. In the event of moisture condensation, allow the device to dry out completely before use.

Take care not to sit on the device. We advise not to carry the device in ones back pocket for that reason.

The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches.

Never clean your device with it powered on. Use a soft, lint-free cloth moistened with water to wipe the screen and the exterior of your device.

Do not use paper towels to clean the screen.

Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void any warranty.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories. 46 8 Regulatory Information NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. 8.1 Regulations Statements European Notice Products with the CE marking comply with Radio &

Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EEC), the Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) as amended by Directive 93/68/ECC - issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards:

EN301489-1&EN301489-19: Electronic compatibility and Radio spectrum Matters (ERM),ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements EN55022: Radio disturbance characteristics EN55024: Immunity characteristics EN6100-3-2: Limits for harmonic current emissions EN6100-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system EN60950 / IEC 60950: Product Safety EN300328: Electromagnetic compatibility and Radio spectrum matters

(ERM);Wideband transmission systems; Data transmission equipment operating in the2.4GHz ISM band and using wide band modulation techniques; Harmonized ENcovering essential requirements under article 3.2 of the R&TTE Directive. 47 The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 48 FCC RF Radiation Exposure Statement This transmitter must not be co-location or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Canada This Class B digital apparatus complies with Canada ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. 8.2 Safety Precautions

Prolonged listening of music in maximum volume can damage the ears.

The use of headphones other than those recommended/supplied can cause hearing impairment due to excessive sound pressure. 49 About Charging

Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.

This product is intended to be supplied by a LISTED Power Unit marked with LPS, Limited Power Source and output rated + 5 V dc / 1.0 A.

Use a specified battery in the equipment. About the Charger

Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet.

Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case.

Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging.

Do not use the charger if the cord becomes damaged.

Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the Battery

Use a specified charger approved by the manufacturer. CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of in fire or water. Important instructions (for service personnel only)

Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

50

Replace only with the same or equivalent type recommended by the manufacturer.

The battery must be recycled or disposed of properly.

Use the battery only in the specified equipment. Additional Information If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. 51