|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2024-11-05
|
|
various
|
2024-04-26
|
|
various
|
2024-04-25
|
|
various
|
2024-03-25
|
|
various
|
Applicant's complete, legal business name |
Mitac Digital Technology Corporation
|
|
various
|
FCC Registration Number (FRN) |
0022217111
|
|
various
|
Physical Address |
4F., No. 1, R&D Road 2, Hsinchu Science Park
|
|
various
|
Hsinchu, N/A 30076
|
|
various
|
Hsinchu, N/A
|
|
various
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
v******@nemko.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
P4Q
|
|
various
|
Equipment Product Code |
SC680A
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
S******** C******
|
|
various
|
R**** C******
|
|
various
|
Title |
Senior Mnager
|
|
various
|
Director
|
|
various
|
Telephone Number |
886-3******** Extension:
|
|
various
|
886-3******** Extension:
|
|
various
|
Fax Number |
886-3********
|
|
various
|
E-mail |
j******@mitacmdt.com
|
|
various
|
R******@mic.com.tw
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/05/2025 |
| various | 10/23/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | DTS - Digital Transmission System |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | PCB - PCS Licensed Transmitter |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SMART Module |
| various | Smart Module |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Modular Equipment Type | Limited Single Modular Approval |
| various | Single Modular Approval |
| various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| various | Class II Permissive Change |
| various | Change in Identification |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Single Modular Approval. Output power is conducted. This device supports 20 MHz and 40 MHz bandwidth mode in the 2.4GHz band. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N727, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.69 W/kg and 1.49 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device supports 20 MHz, 40MHz and 80 MHz bandwidth mode in the 5GHz band. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N727, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.74 W/kg and 1.56 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90(R). The Grantee is responsible for providing the documentation required for modular use. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26 and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band 41. This device contains functions that are not operational in the U.S. and its Territories; filings under this FCC ID are approved only for US operations.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N727, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.16 W/kg and 1.56 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N727, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 1.56 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90(R). The Grantee is responsible for providing the documentation required for modular use. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26 and LTE of 5,10, 15 and 20 MHz bandwidth modes for TDD LTE Band41. This device contains functions that are not operational in the U.S. and its Territories; filings under this FCC ID are approved only for US operations.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N722, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.38 W/kg and 1.43 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device supports 20 MHz, 40MHz and 80 MHz bandwidth mode in the 5GHz band. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N722, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.79 W/kg and 1.43 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device supports 20 MHz and 40 MHz bandwidth mode in the 2.4GHz band. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N722, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.74 W/kg and 1.43 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of MiTAC Tablet, model: N722, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 1.43 W/kg, respectively. |
| various | Single Modular Approval. Output power is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. |
| various | Single Modular Approval. Output power is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90(R). The Grantee is responsible for providing the documentation required for modular use. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26 and LTE of 5,10, 15 and 20 MHz bandwidth modes for TDD LTE Band41. This device contains functions that are not operational in the U.S. and its Territories; filings under this FCC ID are approved only for US operations. |
| various | Single Modular Approval. Output power is conducted. This device supports 20 MHz and 40 MHz bandwidth mode in the 2.4GHz band. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. |
| various | Single Modular Approval. Output power is conducted. This device supports 20 MHz, 40MHz and 80 MHz bandwidth mode in the 5GHz band. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Compliance Certification Services Inc. Wugu Lab.
|
|
various
|
Name |
C******** L******
|
|
various
|
H******** L******
|
|
various
|
Telephone Number |
886-2******** Extension:
|
|
various
|
886-2******** Extension:
|
|
various
|
Fax Number |
+886-********
|
|
various
|
E-mail |
C******@sgs.com
|
|
various
|
h******@sgs.com
|
|