User Manual WiFi Module Model Name: DTV001 Date: 21 - June- 2012 User Manual User Manual MiTAC Information Technology Corp. 187, Tiding Boulevard, Section 2, Taipei, Taiwan, R.O.C. Having checked this document, I certify that it conforms to the requirements of the Contract in all respects, except as otherwise indicated. System Integration Manager Bill Zhun Project Manager B. WAN DTV User Manual Page 1 of 17 20 April - 2012 Subject Installation Manual Description This description presents the WiFi Module be installed into DTV Summary system user manual.The system installation is described in terms of User Manual system and software. Bill Zhun Author System Integration Manager, MiTAC Information Technology Corp. Distribution DTV/MITAC Key Contact Information Document History Bill Zhun billzhun@mitac.com.tw Level - Submission Date Comment 21 June- 2012 A-1 Warnings:
1. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Note:
1. This WiFi module and its FCC grant is limited OEM or manufacture to use, for marketing sell is not allowed. 2. Any device/ host be installed with this WiFi module that its label must indicates contains FCC ID: ODI2012DTV001. DTV User Manual Page 2 of 17 20 April - 2012 User Manual Table of Content 1. INTRODUCTION .......................................................................................................... 4 1.1. Purpose ....................................................................................................... 4 1.2. Manufacturer Information .......................................................................... 4 2. SYSTEM SETUP DESCRIPTION ................................................................................ 6 2.1. System default setting ................................................................................ 6 2.2. MiSling Setting & Upgrade Firmware ....................................................... 6 2.3. MiCube Setting & Upgrade Firmware ..................................................... 10 2.4. 2.5. Pepwave M1 Setting ................................................................................ 11 TOTOLINK Setting ................................................................................. 12 2.6. MiControlCenter ...................................................................................... 15 2.7. Troubleshooting ....................................................................................... 18 DTV User Manual Page 3 of 17 20 April - 2012 User Manual 1. INTRODUCTION 1.1. Purpose This document provides instructions for setup WiFi Module. 1.2. Manufacturer Information MiTAC Information Technology Corp. 187, Tiding Boulevard, Section 2, Taipei, Taiwan, R.O.C. 1.3.Overview 1.4. Specification DTV User Manual Page 4 of 17 20 April - 2012 User Manual DTV User Manual Page 5 of 17 20 April - 2012 User Manual 2. SYSTEM SETUP DESCRIPTION 2.1. System default setting IPC Setting Default IP : 192.168.20.120 VNC Connect Setting: Use software to connect. Ex. UltraVNC 2.2. MiSling Setting & Upgrade Firmware Default IP : 192.168.20.201 Configure Setting:
1. Open IE browser and key in IP address:192.168.20.201 Username: admin Password: None DTV User Manual Page 6 of 17 20 April - 2012 2. Download and install ActiveXSetup.zip User Manual 3. Once ActiveX has been installed, login and Press Start button, and then you will see the Video Streamming from MiSling. DTV User Manual Page 7 of 17 20 April - 2012 User Manual 4. Press configure button, and select ChannelParam, different Bit Rate value can be select. (Default Value is 2Mbps) DTV User Manual Page 8 of 17 20 April - 2012 User Manual 5. To remote upgrade MiSling firmware, select Other and choose Board in UpgradeType, and then browse file source. DTV User Manual Page 9 of 17 20 April - 2012 2.3. MiCube Setting & Upgrade Firmware Default Setting:
WiFi IP: 192.168.20.1~254 User Manual
*Notice. Avoid 192.168.20.120 & 192.168.20.201, occupied by IPC and MiSling. Ethernet IP : 192.168.3.3 Upgrade Firmware from MiControl Server Use RS232 Debug Setting:
Start MiControl Center Server & Sensor_collector Server Change Version in Version.Mapping File Put Firmware into correct Document. Wait Server auto upgrade DTV User Manual Page 10 of 17 20 April - 2012 2.4. Pepwave M1 Setting User Manual Default IP: 192.168.20.1 Username: admin Password: admin 1. Login Pepwave M1 2. Select Network, you can change IP from IP Settings 2-1 Basic Settings:
3. Wi-Fi AP: (Disable in default) DTV User Manual Page 11 of 17 20 April - 2012 You can change SSID and Password!
*Notice: The Multicast Enhancement option always enable. User Manual 4. PressSystem button and SelectFirmware , you can Upgrade M1 Firmware. 2.5. TOTOLINK Setting DTV User Manual Page 12 of 17 20 April - 2012 Default IP: 192.168.20.1 Username: admin Password: admin User Manual 1. Login TOTOLINK 2. Select Wireless Setup, you can change IP in LAN configuration. DTV User Manual Page 13 of 17 20 April - 2012 User Manual DTV User Manual Page 14 of 17 20 April - 2012 2.6. MiControlCenter 1. Menu.zul User Manual 2. Current Sensor Log DTV User Manual Page 15 of 17 20 April - 2012 3. Sensor Log History User Manual 4. Current Event Log DTV User Manual Page 16 of 17 20 April - 2012 5. Event Log History User Manual 6. Control DTV User Manual Page 17 of 17 20 April - 2012 2.7. Troubleshooting No Vedio Output:
User Manual 1. Check M1 SSID and Password on MiCube Config. 2. Check M1, MiSling, MiCube Network. 3. Log in MiSling and check vedio output in configure interface
(192.168.20.201) 4. Check MiCube used Telnet or RS232 Console 5. Check Hardware Error. DTV User Manual Page 18 of 17 20 April - 2012