FCC ID: 2AAOY-710005958 AUDIO BLUETOOTH MODULE

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device

, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna. 2)Increase the separation between the equipment and receiver. 3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4)Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC warning statements:

This device complies with license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AAOY-710005958 IC: 22793-710005958 Label and Location Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046

<2020-04-29>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AAOY-710005958 Model name 710005958 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Short-Term Confidentiality Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Clients name / title : Simon / Director of Engineering Company: Mitek Corp Address: 1 Mitek Plaza Winslow Illinois 61089, United States Phone: (815)-367-3000 Fax: 608-328-2562 E-mail: Simon.broadley@mitekusa.com

1 Mitek Plaza Winslow Illinois 61089, United States Mitek Corp Date: April 29, 2020 FCC ID: 2AAOY-710005958 Model Number: 710005958 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Mitek Corp hereby declare that our product (AUDIO BLUETOOTH MODULE) Model Number: 710005958 will disable Bluetooth Lower Energy function (Bluetooth V4.2 LE) and Bluetooth Classics function (8-DPSK) by software and only open Bluetooth Classics function (GFSK, /4-DQPSK) although Bluetooth modular AC6905A support both Bluetooth Classics function (GFSK, /4-DQPSK, 8-DPSK) and Bluetooth Lower Energy function (Bluetooth V4.2 LE) due to marketing purposes. End-user will only use Bluetooth Classics function (GFSK, /4-DQPSK) in USA market. Please contact me if you have any question. Sincerely,

(Signed) Name/Title: Simon / Director of Engineering Company: Mitek Corp Address: 1 Mitek Plaza Winslow Illinois 61089, United States Phone: (815)-367-3000 Fax: 608-328-2562 E-Mail: Simon.broadley@mitekusa.com

1 Mitek Plaza Winslow Illinois 61089, United States Mitek Corp Labeling Declaration Letter Date: April 29, 2020 FCC ID: 2AAOY-710005958 Model Number: 710005958 Following the KDB 784748 D01 General labeling and Notification, the information related to Labeling implementation for the AUDIO BLUETOOTH MODULE, FCC ID:

2AAOY-710005958 On Product On Product Packaging In Online User Guide Yes Yes No In Printed User Guide No No No No Yes No No No Yes Information FCC ID Number 15.19 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Product Packaging Label is shown below:

FCC ID: 2AAOY-710005958 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, The product is packaged individually. 1 Mitek Plaza Winslow Illinois 61089, United States Mitek Corp Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title: Simon / Director of Engineering Company: Mitek Corp Address: 1 Mitek Plaza Winslow Illinois 61089, United States Phone: (815)-367-3000 Fax: 608-328-2562 E-Mail: Simon.broadley@mitekusa.com