all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
UserMan | Users Manual | 310.54 KiB | ||||
1 2 3 4 | Cover Letter(s) | April 07 2007 | ||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Attestation Statements |
1 2 3 4 | UserMan | Users Manual | 310.54 KiB |
Aastra Phone 142 US Quick Guide Welcome to Aastra Thank you for choosing this Aastra telephone. Its a high-quality product with a superior design. This Quick Guide will help you using your Aastra Phone 142. The complete User Guide is available on our website www.aastra.com and provide answers to all your most important questions. If you should require any further technical support or information about other Aastra products, please first contact the person responsible for your system or get in touch with your local retailer. You can also find information about this phone and other products on our website:
www.aastratelecom.com We hope you enjoy using your Aastra Phone 142. Aastra will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra will not be liable for technical or editor-
ial errors or omissions contained within this documentation. The information contained in this doc-
umentation is subject to change without notice. Using Your Telephone Important Safety Information Communications Regulation Information FCC Notices (U.S. Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation. Modifications not expressly approved by this company could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
Increase the separation between the equipment and receiver. nected. Consult the dealer or an experienced radio/TV technician for help. Health and Safety Information Exposure to Radio Frequency (RF) Signals:
The wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communi-
cations Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-
1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528-2003. 1 Using Your Telephone Using Your Telephone Industry Canada (Canada only) Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. Exposure to Radio Frequency (RF) Signals:
The wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the Ministry of Health
(Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permit-
ted levels of RF energy for the general population. These guidelines are based on the safety stan-
dards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement procedures specified in IEEE 1528-2003. Power Supply / Power Failure / Rechargeable Batteries The main voltage of the adapter must match the local mains voltage (120 V AC) in order to operate the charger cradle. You can only cut the power to the charger cradle off by removing the adapter from the mains socket. In the event of a power outage, the contents of the memory (program and user data) will be saved without any changes being made. Please refer to the important notes on using the rechargeable batteries mentioned in the appendix of the User Guide available on our website www.aastra.com. Safety Precautions The charger cradle must only be installed and operated indoors. Place the charger cradle on a nonslip surface. Do not place the charger cradle or the handset in the proximity of:
Water, moisture or damp areas, for example bathrooms. Sources of heat, direct sunlight or unventilated areas. Devices that generate strong magnetic fields, electrical appliances, fluorescent lamps, computers, radios, televisions, fax machines or telephones. Areas where the equipment can be covered, its ventilation impaired or liquid can get inside. Areas where there is excessive dust and areas subject to vibration, shock or extreme temperature fluctuations. Please note the following when setting up, connecting, and using your telephone:
Lay the cables where they cannot be walked on or tripped over, causing injury. Connect the cables to the appropriate sockets only. Only connect authorized accessories. Only use the plug-in adapter supplied (ID No.: 4516880). Scientific research has shown that in certain cases, medical equipment can be influenced by oper-
ational DECT telephones. You should therefore adhere to any regulations applicable in medical institutions regarding the operation of cordless telephones. Never
- open the charger cradle or handset yourself (except for the battery compartment cover)
- touch the contacts with sharp or metallic objects
- carry the charger cradle by its connector cables. Only use a slightly damp cloth to clean your telephone. Do not operate your telephone in areas where there is any risk of an explosion. Keep the handset and accessories out of reach of small children. Note for the users of hearing aids Before using the handset, users of hearing aids should note that such aids can receive radio signals, which, if powerful enough, may cause an unpleasant hum. Overview and Basic Information General Information The Aastra Phone 142 is a telecommunications device that you can operate on a communications system specified as compatible with an OpenMobilityManagement system (OMM). The newly designed menus enable easy handling and fast access to the many functions and fea-
tures provided by your system. Make yourself familiar with your telephone equipment. Youll discover many new functions that make communication and organization easier. 2 3 Using Your Telephone DECT and GAP Your handset uses a digital radio connection in accordance with the Digital Enhanced Cordless Telecommunications standard (DECT) in the Unlicensed Personal Communications Services (UPCS) frequency band (1,920 1,930 MHz) for the connection to the base station. Users of DECT enjoy superior voice quality, high levels of security, better range, multiple handsets, rich interoperability, free internal calls, handover, and many more value-adding services. The Generic Access Profile (GAP) and the DECT standard define methods according to which digital cordless telephones can establish connections. As the GAP standard is not manufacturer-specific, its possible to combine base stations and handsets from different manufacturers with one another. Basic functions (i.e., making and receiving calls) are always possible when using these combinations. Other functions (e.g., the display of phone numbers or connection states) may not be available if you use other manufacturers devices, however. For more information, please refer to the user guide provided by the other manufacturer or ask your system administrator. Memory Card The Aastra Phone 142 is equipped with a memory card. This stores your phone's local settings
(including a local telephone book with up to 100 entries) and its identification number (IPEI). This means that if you exchange phones with someone else, you simply take your memory card out of your own phone and plug it into the other one. You will then have all the data you need in the new phone and can make calls right away without having to register it on the base station again. The memory card is inserted in a slot in the battery compartment underneath the batteries. For security purposes, your phone is fitted with an additional battery compartment lock. In some models, the memory card has already been inserted in the factory. If the memory card has been supplied separately, you will have to insert it in its slot yourself. This is located in the battery compartment underneath the batteries. For instructions on how to insert the memory card in the Aastra Phone 142, please refer to the section entitled "Installation" below. Headset Connector Your phone is equipped with a 1/10" jack for connecting a headset. In order to maintain electrical compatibility, it is important that you only connect the headset supplied as an accessory by Aastra. Overview Handset:
Earpiece Display Arrow keys Softkey Handsfree key Dialling keypad Cancel / Delete key Power on/off Connector for Headset Rear:
Loudspeaker Softkey Info key Hook key R-key Emergency call key Anschluss fr PC Microphone 4 5 Overview The Keys on the Handset D E F r H B C A 09 Softkeys - the function allocated to each key is shown in the display. The key function changes automatically according to the respective operating state of the handset. If a function only permits you to switch between two options, these are allocated to the left and right softkeys. If more than two options are available, then the softkey will appear. Options When your phone is in the idle state, the arrow key _ opens the telephone book. In this case, the arrow key has no function. When a menu or list is displayed, the arrow keys move the cursor to the desired entry. R-key: this is used to make enquiry calls. Handsfree key: switches the built-in loudspeaker on (key is lit) and off. Info key:
Press this key briefly while your phone is in the idle state to open the info menu
(caller list, redialing, telephone book, voice box). The key flashes when there are new messages (missed calls/messages in your voice box). The C-key is used to delete erroneous input when you are making an entry. A long press on this key in the idle state switches your handset on/off. Hook key: pressing this key corresponds to going off hook (i.e., picking up the handset) or on hook (replacing it again) when using a conventional telephone. Number keys: these keys are used to enter phone numbers or names directly. Keys "1" "9": a long press on the desired key activates the quick call numbers
"1" "9". Key "0": a long press on this key when you are entering a phone number inserts a pause. Installation Unpacking and Installing Your Telephone Unpacking Your Telephone The package contains:
Aastra Phone 142 handset Charger cradle 120 V plug-in adapter with a connector cable (9 ft) Three rechargeable batteries Memory card (either already inserted or separate, depending on the model) Belt clip Brief user guide Setting up the Charger Cradle Your telephone was designed for normal operating conditions. These days, furniture is coated with a large range of different paints and synthetics, and then treated with various polishes. It is possible that some of these substances may contain components which damage the rubber feet on the charger cradle. In this situation, the feet may leave unsightly marks on the surface of furniture. The manufacturer cannot accept any liability for damage of this nature. For this reason you should place your charger cradle on a nonslip base, especially in the case of new or polished furniture. Note Please note the following:
The 120 V mains socket must be within range of the connector cable supplied (9 ft). Do not locate the charger cradle where it could be damaged when a door or window is opened.
#
*
The hash key enables you to enter the hash icon. A long press in the idle state switches the key lock on/off. The star key enables you to enter the star icon. A long press in the idle state switches the ringer on/off. All of the keys are illuminated. 6 7 Installation Installation Commissioning the Charger Cradle Commissioning the Handset In order to start operating your telephone, you must first plug in the charger cradle's power cable. Important Information about the Batteries Safety Precautions Use only the plug-in adapter supplied for use with the charger cradle. Its ID no. is 4516880. Connect the cable on the plug-in adapter to the terminal on the bottom of the charger cradle, and then plug the adapter into the mains socket. Plug-in adapter Note Your charger cradle will not work if the adapter is not plugged in or the power fails. If there is no power to the charger cradle and the handset is placed in the cradle, the handset will remain switched on and will gradually discharge itself while on standby. Never use the batteries for any purpose other than that for which they were intended. Never use a battery which is damaged or worn out. Heat or cold reduces the performance and service life of the batteries. A handset with hot or cold batteries may be temporarily out of order even if the batteries are fully charged. Used batteries should be disposed of in accordance with local authority regulations. Please hand them in for recycling if possible. Do not throw batteries in a fire. Charging and Discharging The batteries can be charged and discharged hundreds of times, but sooner or later they will be worn out. If the operating time (i.e., talk and standby time) is significantly shorter than usual, then it is time to replace the batteries. To maintain the highest operating time possible, the batteries should be discharged now and again by not placing the handset in the charger cradle but leaving it switched on until it discharges itself. Only use this method to discharge the batteries. Extreme temperatures influence the charging capability of the batteries. Initial Setup and Operation Charge the batteries approximately six to seven hours before using the handset for the first time. This protective measure will extend the service life of the batteries. The maximum capacity is only attained after three to five charging and discharging cycles. Place the handset regularly in the charger cradle, thus ensuring optimum charging of the batteries. When replacing the batteries, please pay attention to the correct polarity. It is essential to make sure that only battery types approved by the manufacturer are used. The manufacturer does not accept any liability for malfunctions or damage caused by using normal batteries or other types of rechargeable batteries. Your handset is only operational after the batteries have been charged. You can then use the hand-
set to make and receive calls. 8 9 Installation Installation Charging and Operating Times Inserting the Memory Card Charging time: (empty batteries) to full capacity in approx. six to seven hours. Talk time: approx. 12 hours (with fully charged batteries). Standby time: up to 120 hours (with fully charged batteries). Note If the battery charge is unknown, they will be fully charged in approx. 14 hours. Inserting the Batteries The battery compartment is on the back of the handset. It takes the three type AAA batteries that are supplied. Please refer to the important notes on using the rechargeable batteries mentioned in the appendix of the User Guide available on our website www.aastra.com. 2 1 Opening the Battery Compartment Insert a suitable, sharp item (the top of a ballpoint pen, for example) into the hole at the bottom of the handset (1). Simultaneously lift the battery compartment cover upward as shown (2). Inserting the Batteries (Observe the Polarity) Take care to observe correct polarity: the + - markings of the batteries must correspond with the + - markings in the battery compartment. It does not require any force to insert the batteries. If you try to insert them with incorrect polarity, you may damage your phone. Closing the Battery Compartment Cover When you have inserted the memory card (see next page) and the batteries, replace the cover by placing it on the compartment at a slight angle (1) and pressing it down until it clicks into place (2). Note If a memory card was not in your handset when you first unpacked the phone, then you will have to insert it in its slot in the battery compartment yourself. Important note on safety Take great care handling the memory card. The contacts should be free of dust, grease, moisture, etc. Do not store your card in a place where it will get hot (e.g., through direct exposure to sun-
light). Avoid bending the memory card, as the contacts may get damaged as a result. First of all, press the memory card out of the frame holding it using your finger. Then push the memory card cover in the battery compartment in the direction of the arrow (OPEN). Tilt the cover upward slightly. Make sure you never touch the gold contacts that are now visible, as static discharge could lead to the device becoming defective. Press the memory card under the two semicircular protuberances
(a) in the memory card slot. Make sure the contacts are face down as you do so and that the notched edge of the card is at the bot-
tom left. Press the memory card down until it snaps audibly into place. Close the memory card slot using the cover (to do this, push the lugs into the housing until the cover lies in a flat position on top of the memory card). Removing the Memory Card a 12 b 1 2 You only need to take out the memory card if you wish to give the handset to someone else or need the memory card for a new handset. After removing the batteries: Push the memory card cover in the battery compartment in the direction of the arrow (OPEN). Tilt the cover upward slightly. Using a pointed object, press on point (b) to release the card, as shown in the diagram. Switch the handset off before you remove the batteries, as otherwise data may be lost. Now you can lift out the memory card. 10 11 Installation Charge Display The charge status of the batteries is indicated on the display:
batteries are 81 - 100% charged batteries are 61 - 80% charged batteries are 41 - 60% charged batteries are 21 - 40% charged batteries are 0 - 20% charged
(frame flashes) batteries are almost empty; a warning has been given. Your handset has a battery management system which has to ascertain the limits of the battery charge status first before it can output the correct status to the display. When you insert the batteries for the first time, the charge status will not be displayed correctly until they have been completely discharged and then completely recharged. When the handset is placed in the charger cradle, the flashing or lit segments indicate the charging process or charge status respectively. Charge Warning When the batteries' capacity is almost exhausted, the battery icon in the display will flash, and an acoustic warning is given in the form of three short beep signals every minute. If you are making a call, you have approximately five minutes' talk time left before the handset switches itself off. Use only rechargeable NiMH batteries. Never use normal, nonrechargeable batteries or fuel cells . Please refer to the important notes on using the rechargeable batteries mentioned in the appendix of the User Guide available on our website www.aastra.com. Note You can replace your handset in the charger cradle after every call if you wish. The charging process is electronically regulated so that the batteries are always optimally recharged, whatever their charge level at the time. Do not remove the batteries from the handset unless there is a good reason for doing so. Removing the batteries interrupts the optimized recharging process. The capacity of the batteries can be increased by discharging them completely in the handset when they have been in use for a long period and then fully recharging them again. Installation Registering Your Handset Your handset can be operated on up to ten different communications systems. To do so, it has to be registered to each system. Your system administrator will register the handset for operation on a communications system with OpenMobilityManager. If you want to register your handset on any other communications system, please refer to the rele-
vant documentation. If you want to register the handset on a base station complying with the GAP standard, please activate the GAP only feature in the System > Subscriptions menu (see User Guide available on our website www.aastra.com). In this setting, only GAP-compatible features are available. When the handset is operated on a communications system with OpenMobilityManager
(OMM), this feature must not be activated. Mounting and Removing the Belt Clip Push the adapter ring over the back of the handset until it snaps into the openings on the side. To remove the adapter, pull the two sides slightly apart. Mounting the belt clip: Press the upper parts of the belt clip together as shown, push it over the belt, then release the end of the clip again. 2 2 Fastening the handset: Using the adapter ring, push your handset into the belt clip until it snaps audibly into place. 3 4 Removing your handset: Press the release button and pull the handset upwards and out of the belt clip. 12 13 Basic Functions Switching the Handset On / Off Once the batteries have been charged for the first time, your handset is automatically switched on and is ready for operation. You can switch the handset off so that your batteries will stay charged for longer. Switching the handset off C Press and hold down the C key. Note Basic Functions Key Lock Activate the key lock before putting your handset in a bag or your pocket to prevent a call from being made accidentally. If you receive a call, the key lock is deactivated for the duration of the call. You answer the call by pressing the hook key. Activating the Key Lock E Press Menu
. F Key Lock OK
. Your handset cannot receive calls or signal programmed alarms while it is switched off. Youll see Key Lock in the display. Switching the handset on C Press and hold down the C key or place the handset in the charger cradle. You will see the following in the display, for example:
Alternatively you can activate the key lock as follows:
In the idle state, press and hold down the hash key #. OMMSIP 5050 pp5050 19.10.06 16:27 Menu The name of the communications system is OMMSIP and the handset has the internal phone number 5050. The handset receives this information from the communications system. The name of the handset is pp5050. You can edit this name in the Telephone Options > User Name menu. Deactivating the Key Lock Key Lock Press the softkey appears in the display to remind you that you have activated the lock. The current date and time settings are usually supplied by the system when the phone is registered. If this is not the case, you will be able to enter the current date and time manually. If you make no input for approximately a minute or press The date and time are then not displayed. In this state, entries to the caller list are also registered without the date or the time.You can enter the date and time settings later in the Alarm menu.
, then the display changes to the idle state. Esc To Unlock Press #
Press the hash key # to deactivate the lock. Note Please register!
If you see your system administrator. 14 in the display, the handset needs to be registered. Please contact Switching the Handsfree Function On/Off To switch the loudspeaker on or off, press the handsfree keyH in the idle state (i.e., when the handset is ready to make call) or during a call. 15 Basic Functions Basic Functions Adjusting the Earpiece Volume during a Call Emergency Number (SOS) Lets say youre making a call using the earpiece, the loudspeaker, or a headset. You use the arrow keys or the number keys to adjust the volume. A single press increases or decreases the volume by one level, e.g., Volume:3
. In addition, the bar indicator
]]]]]|||
shows the selected volume level. You can also press the corresponding key a number of times to adjust the volume to one of eight levels. The minimum and maximum values are indicated by means of an special tone. In order to be able to make an emergency call with just a single long press of the R key r, you must first store this emergency number using the Telephone Options > Emergency Call menu item. You make the emergency or SOS call to the programmed phone number by pressing and holding down the R key r . The call is dialed right away, so you don't have to press any more keys. The handset goes into handsfree mode. The adjusted settings are only valid for the current call. You edit the basic settings for the earpiece in a menu (see User Guide available on our website www.aastra.com). Quick Call Switching the Ringer Off If you don't want to be disturbed e.g., because youre in a meeting you can switch the ringer off (in which case you will see You perform this setting by pressing the star key *and holding it down until you hear a tone and Buzzer Off appears in the display. in the display). To switch the ringer on again, press and hold down the star key * again. Alternatively, you can switch the ringer off by deactivating the Buzzer item in the Volume Set-
tings > Device menu. Youll then see in the display. If you have defined an entry in the telephone book as a quick call entry (see see User Guide available on our website www.aastra.com), you can press and hold down the corresponding key to show the phone number in the display. You dial the number by pressing the hook key. Muting the Handset If you don't want the other party taking part in your call to hear something that is said e.g., if you need to speak with another person in the room then you can temporarily mute your handset. You are making a call:
D Press Mik. Youll see Mic. off in the display for a few seconds. Now the other person involved in the call cant hear you anymore. When you want to speak with the other party again, press the left softkey again. Youll see Mic. on in the display for a few seconds. The other party can now hear you again. Backlight The backlight is activated every time you press a key, and it remains on for approximately eight sec-
onds. Message-waiting Indication / Notification Texts Adjusting the Display Contrast You can change the display contrast in order to adjust it to local lighting conditions. You perform the settings in the Telephone Options menu (see User Guide available on our website www.aastra.com). and / or Voice Box If the handset caller list contains a missed call or there are messages in your voice box, the info key B will flash and the following notification text will appear:
Missed Calls The message Voice Box only appears in conjunction with the flashing info key B if your voice box access number has been registered in the Telephone Options > Voice Box No. menu. If this is not the case, then only the sary. You can retrieve your messages by means of the info key B (see User Guide available on our web-
site www.aastra.com). icon will flash. Contact your system administrator for assistance if neces-
16 17 Making Calls Dialing Phone Numbers Dialing Phone Numbers Directly A Press the hook key. t Enter the phone number and press #; the phone number will be dialed right away. .. or E Press Menu
. F Select one of the following menu items and confirm it by pressing OK
. Select a phone number from the caller list and initiate dialing with Options Dial
/
. Select a phone number from the redial list and initiate dialing with Options Dial
/
. Select a phone number from the telephone book and initiate dialing with Options Dial
/
. Caller List Redial Telephone Book To end your call:
A Press the hook key. Tip You can also open the redial list by pressing the left softkey
. Making Calls A Press the hook key to dial the number. .. or chain the phone number you previously entered to another one:
Please note: In predialing, if the input cursor is positioned behind the phone number, the number to be chained will be suffixed to that phone number. If the input cursor is at any other point, the number to be chained will be prefixed to the phone number. Menu E Press F Select one of the following menu items and confirm it by pressing
. OK
. Caller List Redial Telephone Book Select a phone number from the caller list and copy it to predial-
ing with Options Predial OK
/
/
. Select a phone number from the redial list and copy it to predial-
ing with Options Predial OK
/
/
. Select a phone number from the telephone book and copy it to predialing with Options Predial OK
/
/
. A Press the hook key to dial the number. Making Calls Using the Quick Call Feature t Press and hold down the number key 1 9 on which the quick call entry is saved until the number appears in the display. A Press the hook key to dial the number. For information on creating a quick call entry, please see see User Guide available on our web-
site www.aastra.com. Making Calls Using the Predialing Feature Note You can use predialing to correct your input before dialing the number or to chain phone numbers from different lists. t Enter the phone number while the handset is in the idle state. If necessary, correct any errors youve made with the arrow keys (cursor) and the C key by deleting them and entering the right input. If you activate the Auto Quick Hook feature in the Telephone Options menu, the quick call num-
ber will be dialed immediately without being copied to predialing. Its not possible to postdial num-
bers when a quick dial entry has been dialed. 18 19 Making Calls Making Emergency Calls r Press and hold down the R key. The stored phone number will be dialed directly. The handset switches to handsfree mode. A Press the hook key to end the call. Making Calls from the Redial List The redial list contains the last ten phone numbers you dialed (max. 32 digits long). Every number you subsequently dial overwrites the oldest number in the list. You can view the phone numbers in the redial list, together with the corresponding details (the time of the call, for example), delete them, and copy them to predialing, to the telephone book, or to the caller filter. D Press F Select the desired phone number. while the handset is in the idle state. A Press the hook key to dial the number immediately or D Press F Select Options Add to
, and confirm this by pressing
. Making Calls Making Calls from the Telephone Book The telephone book can contain up to 100 entries, which are automatically sorted into alphabetical order. F Press the arrow key while the handset is in the idle state and select the name you want F or t search for the name by entering the initial letter (if necessary, press the number key several times in quick succession). A Press the hook key to dial the number immediately or D Press F Select Options Add to
, and confirm this by pressing
. OK
. F Select Predial copied to predialing.
, and confirm this by pressing OK
. The phone number will be For further telephone book editing options as well as information on how to create new entries, please see User Guide available on our website www.aastra.com. OK
. You can still open the telephone book if you have already pressed the hook key and can hear the dial tone. Note F Select Predial copied to predialing.
, and confirm this by pressing OK
. The phone number will be For further list editing options, please see see User Guide available on our website www.aas-
tra.com. Note You can still open the redial list when you have already pressed the hook key and can hear the dial tone. 20 21 Making Calls Making Calls from the Caller List Making Calls Answering Calls Press the info key B to open a list with the following items for selection: voice box, caller list, redial list and telephone book. The voice box entry only appears if your voice box access number has been registered in the Telephone Options > Voice Box No. menu. The procedures for making calls from the telephone book and the redial list are described above. When one of these lists is open, you can call the phone numbers displayed there, either directly or using predialing. You can view the phone numbers in the caller list, together with the corresponding details (the time of the call, for example), delete them, and copy them to predialing, to the telephone book, or to the caller filter. B Press the info key while the handset is in the idle state. F Select Caller List
, and confirm this by pressing OK
. F Select the desired phone number. A Press the hook key to dial the number immediately. or D Press Options
. F Select Add to
, and confirm this by pressing OK
. F Select Predial copied to predialing.
, and confirm this by pressing OK
. The phone number will be Calls are signaled on the handset both acoustically and on the display, which is then illuminated. Youll see the caller's phone number in the display. In addition, youll see the caller's name in the upper text line. 5051 pp5051 Silence Menu The phone number will not be displayed if the caller is calling anonymously, i.e., if the caller has sup-
pressed phone number transmission, or if for any reason the phone number is not transmitted. While the call is being signaled you can D use the Silence softkey to suppress signaling for this call. You can still answer the call by pressing the hook key until the caller goes on-hook again. .. or:
E Press F Select one of the following menu items, and confirm this by pressing Menu
. OK
. Silence Reject The ringer will be switched off. The call will be rejected (the caller hears the busy tone). For further list editing options, please see User Guide available on our website www.aastra.com. A Press the hook key to answer the call. Note If you have already pressed the left softkey with Silence
, its function changes to Reject
. 22 23 Making Calls Options during a Call If required, you can select a phone number from one of the available lists and postdial it during the current call by pressing
(DTMF postdialing). OK Making Calls Answering a Call during a Conversation (Call Waiting) You hear the call-waiting tone and see the call in your display. OK
. Mic. Call from pp5052 5052 Menu E If required, press F Select one of the following menu items, and confirm this by pressing briefly. Menu Telephone Book Open the telephone book. Redial Caller List Open the redial list. Open the caller list. Microphone off Mute the microphone. A Press the hook key to end the call. Note Further options during a call such as toggling or call transfer are described below. You see the caller's name and phone number. r Press the R key to answer the call. The first call is then held. .. or:
E Press and hold down to open the service menu. Menu F Select w: pp5052
, and confirm this by pressing OK
. The waiting caller is accepted and the existing call is held. "w:" stands for waiting, and pp5052 in this example is the name of the waiting caller.The first call is held. When you want to end the call with the second caller and return to your held call:
A Press the hook key. The service menu then opens automatically. F Select
, and confirm this by pressing h: pp5050 OK
.
"h:" stands for "hold" and "pp5050" in this example is the name of the first caller. Note You can also end the first call and then answer the waiting call. To do this, press the hook key A. The service menu opens automatically. Select
, and press w: pp5052
.OK 24 25 Making Calls Making Calls Making Another Call during a Conversation
(Enquiry Call) Making an Enquiry Call You are making a call. r Press the R key. The first call will be held. t Enter a phone number using the number keys, then press # (or wait four seconds). or Menu Press phone book as described in the User Guide available on our website www.aastra.com. briefly and select a phone number from the caller list, the redial list, or the tele-
... or:
E Press and hold down Menu to open the service menu. The first call will be held. F Select new call
, and confirm this by pressing OK
. When free lines appears in the display, confirm this by pressing OK
. F Select one of the following menu items and confirm this by pressing OK
. no by phonebook edit number Opens the telephone book. You can then dial a phone number that has been stored there (ssee User Guide available on our website www.aastra.com) Use this to enter the number by means of the number keys, and then press OK
. Toggling during the Enquiry Call If the enquiry call can be established, you can use the R key r to speak alternately with the other two parties (this is known as toggling). .. or:
E Press and hold down F Select h: xxx Menu to open the service menu.
, and confirm this by pressing OK
. The currently held call will be activated and the active call held. Transferring a Call Blind Transfer You are making a call and want to transfer it to another party without consulting with that party beforehand:
E Press and hold down F Select call transfer Menu to open the service menu.
, and confirm this by pressing OK
. Under "A: ..." youll see the phone number of your current party. B: ( ) F Select F Select one of the following menu items and confirm this by pressing
, and confirm this by pressing OK
. OK
. To end the enquiry call and return to the held call:
A Press the hook key. The service menu opens automatically. F Select OK
, and confirm this by pressing h: pp5050
. no by phonebook edit number Opens the telephone book. You can then dial a phone number that has been stored there (see User Guide available on our website www.aas-
tra.com). Use this to enter the number by means of the number keys, and then press OK
.
"h:" stands for "hold", and "pp5050" in this example is the name of the first party. Note If you are entering a phone number and don't press any key for four seconds, the number that has been entered up to that point will be dialed. Postdialing is not possible. F Select start
, and confirm this by pressing OK
. Your handset returns to the idle state. 26 27 Making Calls Consultative Transfer You are making an enquiry call and your handset is in the toggle state (see above):
E Press and hold down F Select call transfer Menu to open the service menu.
, and confirm this by pressing OK
. The two parties in your call are displayed under "A: ... " and "B: ...". F Select start
, and confirm this by pressing OK
. Your handset returns to the idle state. If the desired party is busy or cannot be contacted:
r Press the R key to return to the first call. Note If you initiate the calls and you then connect the two other parties by means of the call transfer call. Under certain circumstances the call charges may be billed to you. menu item, please note that you have no further control over the duration of the Appendix Menu Structure Key Lock on/off Alarm Ringer Settings Volume Settings Caller Filter System Alarm active Set Date / Time Melody Melody Type Device Volume Settings Earpiece Hands-free Headset Buzzer Accept list Block List Filter off List of numbers Subscriptions IPEI Version Number Internal External Unknown Number VIP Alarm Messages Repeat Play once Buzzer Vibrator Headset Systemname
(depends on the system being operated/
only appears after login) Deutsch English Franais Espaol Italiano Nederlands Svenska Dansk Norsk Portugues Suomi Cesky Slovensky Key Click Coverage Warn Battery alarm Confirm tones End of Menu Telephone Option Language User Name Attention tones Emergency Call Voice BOX No. Auto Answer Silent Charging Charger Answer Auto.KQuick Hook Auto.key lock Charging LED Disp.Contrast Reset 28 29 Aastra Phone 142 US If youve read this owners manual and still have problems, please visit our website at www.aastratelecom.com or call 1-800-574-1611 for technical assistance. Copyright 2006 Aastra All Rights Reserved Created in November 2006 Item-No. 69014.025 The right to technical changes is reserved.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-07-04 | JBP - Part 15 Class B Computing Device Peripheral | Class II Permissive Change | |
2 | 1921.54 ~ 1928.45 | PUE - Part 15 Unlicensed PCS portable Tx held to ear | ||
3 | 2006-12-18 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
4 | 1921.54 ~ 1928.45 | PUE - Part 15 Unlicensed PCS portable Tx held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2007-07-04
|
||||
1 2 3 4 |
2006-12-18
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
Mitel Deutschland GmbH
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0015598576
|
||||
1 2 3 4 | Physical Address |
Zeughofstrasse 1
|
||||
1 2 3 4 |
Berlin, N/A
|
|||||
1 2 3 4 |
Berlin, N/A 10997
|
|||||
1 2 3 4 |
Germany
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
t******@ets-ps.com
|
||||
1 2 3 4 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 3 4 |
A3: Unlicensed Personal Communication System (PCS) devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
UOU
|
||||
1 2 3 4 | Equipment Product Code |
69126OP27DS-01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
H****** W******
|
||||
1 2 3 4 | Telephone Number |
+4943******** Extension:
|
||||
1 2 3 4 | Fax Number |
+4943********
|
||||
1 2 3 4 |
h******@mitel.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 3 4 | PUE - Part 15 Unlicensed PCS portable Tx held to ear | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Aastra DECT 142 | ||||
1 2 3 4 | Aastra Phone 142 US | |||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Output is conducted. Device has been tested for SAR compliance for head and body-worn configurations. The Charging Rack 960001488001 with AC/DC Adaptor FW7362 incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. SAR compliance for body-worn operating configurations is limited to the specific belt clip tested for this filing. End-users must be informed of the operating requirements for satisfying body-worn RF exposure compliance. The highest reported SAR values are: head 0.072 W/kg; body 0.079 W/kg | ||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Eurofins Product Service GmbH
|
||||
1 2 3 4 | Name |
R****** K******
|
||||
1 2 3 4 | Telephone Number |
49-33********
|
||||
1 2 3 4 | Fax Number |
49-33********
|
||||
1 2 3 4 |
r******@eurofins.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15D | CC | 1921.54000000 | 1928.45000000 | 119.0000000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15D | CC | 1921.54000000 | 1928.45000000 | 0.1190000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC