FCC ID: BGBMT345XFOR6A TDMA/AMPS Cellular and PCS Phone

TABLE OF CONTENTS KEYPAD LAYOUT wesecee 2 Menu SysTeM 27 PHONE OVERVIEW 0.4... 3 Menu Map .. 28 ENTERING TEXT .. 23 USING THIS GUIDE .. 4 TEXT MESSAGES 31 Kev SYMBOLS .... 4 VOICE MAIL ....-..- 35 DISPLAY ICONS .. 5 PHONE BOOK .... . 36 GETTING STARTED .. ~7 SETTINGS ..... 39 ATTACHING THE BATTERY .... 7 CALL HISTORY .. 47 CHARGING BATTERY ... wed OFFICE TOOLS 49 CHANGING FACEPLATE ...... 10 SECURITY ....- 55 NETWORK SELECTION . Basic PHONE - 59 OPERATIONS ..csceneeeess 12 APPENDIX cccsesccssnesseere 61 TURNING ON THE PHONE ... 12 ACCESSORIES . 61 STANDBY SCREEN .. GLOSSARY .... 62 MAKING A CALL... TROUBLESHOOTING . 64 CONVERSATION OPTIONS .. 13 DIsPLAY MESSAGES . 65 ANSWERING A CALL . ENDING A CALL KEYPAD LOCK 04... -

TURNING OFF THE PHONE .. 14 NETWORK MESSAGES .. SAFETY INFORMATION .. CARE AND MAINTENANCE . 19 GENERAL FEATURES ..... 20 DIALING STORED NUMBERS .20 SPEED DIALING wo. ceeccene 29 EMERGENCY CALLS Quiet Mop!

MUTING ... VOLUME ADIUSTMENT . SENDING DTMF TONES SILENT SCRATCHPAD:

CALL WAITING .... PAUSE DIAUNG ... os TH+ DIALING eee 26 EDITING PHONE NUMBERS 26 T300 KEYPAD LAYOUT KEY ACTIONS

= a Softkeys or selection keys Pertorm the actions indicated by the text abave it.

= lend, On/Off key Press and hold to tum the phone on or off. 1 | Press to end a call. |

i Press while in menus to go back to the standby screen, |

Send key Press to make or answer a call. Press in standby screen recalls last dialed numbers Express Key

| Press left to view Phone Book entries of return to previous display. Press right to enter main menu and/or select a feature from list. In conversation, press up of down to adjust volume. |

Press up or down to scroll up/down the menus. In standby, press up or down to enter volume contro! menu. Moves the cursor through the displayed text when editing. |

| Alphanumeric keys, 0-9, *, #

Enters numbers, characters and punctuation marks. key. Press and hold to call the voice mail number.

@ to @ keys. Press and hold to speed dial preset numbers:

& key. Press and hold to enter 'P symbol and SP symbol. Press to toggle between upper and lower case text. ;

@ key. Use with keypad lock softkey to fock/unlock the keypad. Press and hold to view special characters. 0600 0310) OOOO T300 PHONE OVERVIEW LED Retractable Call and antenna battery charge Extend the indicator antenna fully when making or Headset socket receiving a cal Connect the headset here Earpiece Graphic display Jelephone numbers, menus, messages, etc. are displayed here Right softkey Performs action indicated by text directly above Left softkey Performs action indicated by text directly above Express Key Navigates around the memories and menus. Press up or down during conversation to adjust volume Send, Answer key Dials displayed number or name and answers calls on/off, End key Press and hold to turn the phone on or off, Press to end a call or return to standby screen Alphanumeric keys Enter text and telephone numbers Microphone AC Adapter Accessories socket socket USING THIS GUIDE Your dual band/dual mode T300 phone operates on PCS 800 MHz digitaYanalog and 1900 MHz digital networks. Digital systerns provide improved voice quality as well as security and privacy. Dual mode means that if you travel to an area without digital service, your phone will transfer to an analog system with no gap in your connection. Certain features included in this guide called Network Services are supplied by wireless service providers Before you can activate or use any of these Network Services, you must subscribe to the services from your home service provider. For a full list and explanation of Network Services, please ask your service provider. One of the most versatile features of the T300 phone ate the softkey functions. They provide immediate access to the actions you are most likely to do next, depending on what you are currently doing. If you are ona call, the Options softkey brings you directly to options such as muting the microphone or entering OTMF tones without fumbling through menus. Softkey actions and labels change with each new screen. Key SYMBOLS When these symbols appear in this guide, it indicates that the corresponding key is to be pressed Left softkey G@ __ Right arrow on Express Key

@ Right softkey Left arrow on Express Key

\) SEND key @ Uparrow on Express Key fs END/Power key Down arrow on Express Key Store (> Softkeys control the action or function displayed on the screen above. Press the softkey below the term to perform that action. For example, Store {*) means press the softkey under the word Store. Softkey actions and labels change with each new screen. Select. Use Gand ) to scroll to the desired item in the menu and choose by pressing G. For example, select Phone Book means scroll to the menu item Phone Book and choose by pressing C3. DispLay Icons The display screen shows pictures, icons, numbers, text and animations. Icon al Rr Pus e eo Display screen in standby mode item Signal Strength Level Digital Roaming Private System Unanswered Call Voice Mail Short Message Service (SMS) or Text Message SMS message bank is full Keypad Lock Quiet Mode Description Four levels indicate the strength of the received signal from network on which phone is currently registered. If no network is available, the icon does not appear Digital network available. If not displayed, phone is operating on analog network Phone is logged on to a network other than its home network Phone is accessing a private or residential network Incoming call is missed (unanswered) PCS voice mail message has been teceived and stored. Must be offered by service provider and subscription purchased PCS text message has been received and stored. Must be offered by service provider and subscription purchased SMS message bank is full and cannot store new messages Keypad lock is activated Instantly silences ringer, keypad tones, and alert tones g Mute Ye Silent Mode oe Vibe Mode wig Text Mode Upper Case as Text Mode Lower Case Battery Level Low Battery 0 6 Scroll arrows Conversation Mode he Voice Privacy Off Microphone is muted during conversation Incoming ring tone is turned off Vibrate alert set for incoming call Upper case text can be entered Lower case text can be entered Three levels indicate the battery charge level; low, medium, high Flashes when the battery is nearly empty More menu items can be displayed if @

or ) are pressed Currently connected to call Veice Privacy is not supported by current network connection - usually analog channels GETTING STARTED ATTACHING THE BATTERY Battery catch CHARGING THE BATTERY Note: The battery must be fully charged before using the phone for the first time. To reach full capacity, charge and discharge the new battery three times before use. To charge the battery, follow procedure below. To fully discharge the battery, teave the phone on unti you heara warning tone and the Low Battery! warning appears. Connect the AC Adapter to the phone as shown. When the phone s off, battery charging is indicated by Charging... message. The LED tight will be red. When charging is finished, Battery Full! displays and the LED light will change to green. When the phone is on, charging is indicated by the battery icon flashing 4-2-3 bars continuously. When charging is completed, the battery icon will show three solid bars. If a call is received during charging, the LED light will flash green rapidly. If the phone Is used while charging, the charging time will be longer. BATTERY CHARGING TIMES Approximate battery recharging time using the AC Rapid Charging Adapter:

Battery || Type 7 Charging time 1050 mAh Lithium lon | Standard 3 hours 1400 mAh Lithium lon | Extended Ufe 3 hours BaTTERY UsE TIMES INCLUDE?

Low BATTERY WARNING When the battery power falls to its iowest level, the message Low Battery!

displays and a low battery warning tone sounds, If you are ona call, end the call and turn off the phone by pressing and holding down &J. Recharge the battery as described or replace it with a charged one. Low Battery!

Exit REMOVING THE BATTERY tor fi Pushy up and held he BATTERY USE AND SAFETY INFORMATION When the operating time (standby and talk time) is noticeably shorter than normal, it is time to buy a new battery. jt is normal for batteries to become warm during charging. Do not leave batteries connected to a charger jonger than neces-

sary, overcharging will shorten battery life. True for Lithium Ion?

Disconnect battery chargers from the power source when not in use

* Do not leave the phone in a closed car during hot summer or cold winter conditions. The phone may tempora rily not work with a hot or cold battery.

* Batteries may explode if discarded into a fire. Avoid putting the batteries into contact with metal objects which may short circuit the battery terminals (e.g. keys, paper clips, coins, chains etc).

= Donot drop or subject the batteries to strong physical shocks. if the battery terminals become soiled, clean them with a soft cloth.

* Old batteries must be returned to the place of purchase or to a battery recycling center. Do not dispose of old batteries together with household waste. CHANGING THE FACEPLATE Before changing the faceplate always turn off the phone and disconnect from any charging device or car kit. REMOVING THE FACEPLATE 10 REPLACING THE FACEPLATE

. ha GRE HES Do not use excessive force when changing the faceplate Avaid bending the faceplate De not leave in direct suntight. Always use the phone with the faceplate attached. Do not clean the phone with alcohol, strong chemicals or solvents. Wipe it only with a soft, slightly dampened cloth, Read the Care and Maintenance instructions on page 19. 11 Basic PHONE OPERATIONS TURNING ON THE PHONE go Press and hold! (pA bi

") tommon tone sounds: |

Code

> See pages 46 and 56 for more details on Lock Cades. STANDBY SCREEN When you turn on your phone, a picture animation displays and a turn-on tone sounds, then the name of the network and/or service provider appears. Signal strength, battery level and Digital System (if available) icons appear. The Quiet and KeyLock softkey functions appear as well. nnn Mitsubishi Thu. Jen, 20, 2000 40:45 arn KeyL Standby Screen example Press @) to go to your Phone Book (see page 35}

Press CG to go to the phone Main Menu (see page 27). Press @) to go to volume control (see page 23). Yo set time and date, see page 45. MAKING A CALL 4ooceniartiie felaphone samber you wish toda!

Cotrct any mistaks by. pressing Clear ci. Press anid hold this key to erase the entire entry. Sees 2 Press \W) to dia! (seqdy the pumbea

> Extend the antenna fully when calling for best results To store the dialed number in the Phone Book, press Store {> before pressing {&) to connect the call. While the call is connecting, the dialed number displays. If the number matches a Phone Book entry, the name displays instead of the number. After connecting, the call timer dispiays If the call does not connect and Auto Redial is activated, the phone will attempt to dial again (see page 39 for details). 12 MUTING While talking, to mute the microphone, press Mute softkey. On the screen, the G icon appears. Ta turn the microphone back on, press UnMute softkey. VOLUME ADJUSTMENT During a call, press G) or G te adjust your caller's voice. Press and hold to continuously increase or decrease volume. The normal conversation screen returns after 3 seconds or press the right softkey. CONVERSATION OPTIONS While talking, press Options softkey to send AutoDTMF tones, use the Silent Scratch pad, of Mute the microphone. Press ( to access the Main Menu. If offered by your service provider, press \&) to send a hook+flash request. See Conversation Options on page 22 for details. ANSWERING A CALL The ringer alerts you to an incoming call and the LED light flashes green The callers name and number are displayed if they are stored in your Phone Book. Press the right softkey to mute ring tone. To answer the call, Quiet MopE The Quiet softkey allows you to silence the ringer, turn off DTMF touch tones, and silence any Alert tones with one touch of a key. Use this when entering a meeting or a theater, for example. See page 22 for details. ENDING A CALL 13 KeypaD Lock When Keypad Lock is activated, it prevents accidental key presses oF calls being made when the phone is carried in a packet, briefcase or handbag. Keypad Lock is suspended during incoming calls and resumes when the call ends. Emergency calls can still be made. To activate Keypad Lock, Poss KeyLock To deactivate Keypad Lock, A picture animation displays and a turn-off tone sounds (if Silent Mode is not activated). ff the keypad is locked, you must unlock it first before turning off the phone. NeETworK MESSAGES A Network Message screen will appear when you have missed an incoming call, received a voice message, or received a text message. An alert tone will also play for voice and text messages. ff you do not want to view or hear the message at once, press Exit @\ to go to the standby screen. The appropriate icon will remain on top of the screen to remind you. Network Messages Voice Messages: t BSClOCE cca One type of Network Message Multiple types of Network Messages 14 When any of these icons display on screen, you have missed an incoming call, received a voice message, or received a text message. Follow these actions to pick up your messages. ficon tam:

Unanswered Call Press @, then select Call History. Select Call Lags. Select Unanswered Call List. See Call Logs on page 47 for details. e Voice Mail Press (I to speed dial your voice mail message center. See page 35 for details. ge Text Message Text Message bank is full To read the message, press CG}, then select Text Messages. Select InBox to display the message header. Press GQ, then select Read Message. See Text Messages on page 31. Delete at least one old received message to be able to receive new messages. See Managing Text Messages on page 32 for details. 15 SAFETY INFORMATION Exposure To RADIO FREQUENCY SIGNALS Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. These guidelines are consistent with the safety standards previously set by both U.S and international standards bodies:

* ANSE C95.1 (1992)

*NCRP Report 86 (1986)

*ICNIRP (1996)

* american National Standards Institute, National Councit on Radiation Protection and Measurements, International Commission on Non-lonizing Radiation Protection Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). The design of your phone complies with the FCC guidelines (and those standards) Your phone has been tested and meets the limits for radio frequency

(RF) exposure set by the FCC for normal handheld use next to the ear or worn on the body using a Mitsubishi brand belt clip accessory specified for this phone, and used as intended. Operation of the phone in other situations such as in shirt pockets or non-Mitsubishi brand belt clips or holsters, or operation with the back of the phone closer than 13mm

(0.51"} to the body, have not been tested. Therefore operation of the phone in non-tested situations may not meet the limits for RF exposure set by the FCC and must be avoided. ANTENNA CARE Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. PHONE OPERATION NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. 16 EFFICIENT OPERATION: For your phone to cperate most efficiently, do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. DRIVING Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:

Give full attention to driving - driving safely is your first responsibility.

* Use hands-free operation, if available.

* Pulloff the road and park before making or answering a call if driv-

ing conditions sa require. ELECTRONIC DEVICES Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the BF signals from your wireless phone. Pacemakers The Health industry Manufacturers Association recommends that a minimum separation of six (6") inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:

* Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON

* Should not carry the phone in a breast pocket

+ Should use the ear opposite the pacemaker to minimize the potential for interference

{f you have any reason to suspect that interference is taking place, turn your phone OFF immediately

. Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives). Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately Vv shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to de so. Haspitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Pasted Facilities Turn your phone OFF in any facility where pasted notices so require. AIRCRAFT FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. BLASTING AREAS To avoid interfering with blasting operations, turn your phone OFF when in a biasting area or in areas posted "Turn off two-way radio. Obey all signs and instructions. POTENTIALLY EXPLOSIVE AREAS Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling areas such as gasoline stations;

below deck on boats; fuel or chemical transfer or storage facilities;

vehicles using liquefied petroleum gas (such as propane or butane);

areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. FOR VEHICLES EQUIPPED WITH AIR BAGS An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment avea. Hf in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. 18 CARE AND MAINTENANCE This telephone is the product of advanced engineering, design and craftsmanship and should be treated with care. The suggestions below will help you to enjoy this product for many years. Do not expase the phone to any extreme environment where the temperature or humidity is high. Do not expose or store in cold temperatures. When the phone warms up after power on, to its normal temperature, moisture can form inside where it may damage the electrical parts. Do not attempt to disassemble the phone. There are no serviceable parts inside that you can replace. Do not expose the phone to water, rain or liquids. it is not water-

proof Do not abuse this phone by dropping, knocking or violent shaking. Rough handling can damage it Deo not clean the phone with strong chemicals or solvents, Wipe it only with a soft, slightly dampened cloth, Do not place the telephone near computer discs, credit or travel cards or other magnetic media, The information contained on discs or cards may be affected by the phone. Do not connect incompatible products. The use of third party equip ment of accessories, not made or authorized by Mitsubishi Wireless Communications Inc., may invalidate the warranty of your phone and may be a safety risk. Do not remove the labels. The numbers on it are important for ser-

vice and other related purposes. Contact an authorized service center if a defect is noticed. 19 GENERAL FEATURES DIALING STORED NUMBERS Any number stored in the phone's memory can be recalied to the display and dialed. .from the Phone Book

> See Phone Book, page 36. . from the Last Numbers Dialed List The last 10 numbers you have dialed are stored in the Call Logs. 4

...from the Call Logs List The last 10 numbers dialed, the last 10 received call numbers, and the last 10 unanswered call numbers are stored in the Call Logs. ..from SMS text messages The call-back number on an SMS message header ora phone number included within an SMS message can be dialed directly. i the desired mess:

Press and bold |) to dial the number :

> See Text Messages, page 31. 20

.. from the Memo Pad ieee Pi entel the Maint Mebu. Select Office Tools. 2 Select Memo Pad, then select Read Memos. Bo pes Sore ite the desited memo:

> See Memo Pad, page 53 SPEED DIALING Speed dialing is an easy way to dial stored numbers. You can choose up to 8 numbers and names for speed dial on your phone with two exceptions: Key 1 is fixed as the Voice Mail Center number and Key 9 will dial an emergency number. Use either of the following two methods. old the digit Kay; oF:

ss the digit key, then press AL). :

> See Speed Dialing on page 38 to set up Speed Dial numbers.

> Emergency Key 9 option can be changed. See Emergency Key 3on page 39, EMERGENCY CALLS When Emergency Key 9 is enabled in the Phone 800k menu, you can speed dial an emergency number with one key. To speed dial Emergency Key 9, ides and Hold (9, or press 9? ther press. (Q)-

Emergency call speed dialing can be enabled or disabled via the Main Menu. The default setting is Yes (enabled). See Emergency Key 9 set up on page 33. Emergency call dialing wil} override Auto Lock and any call restriction setting.

\f Keypad Lock is turned on, dial 9-1-1 and press () key. Press and hold 9 or press 9 and Send key to speed dial the emergency call will not work when Keypad Lock is turned on. Some service providers may offer a second emergency number instead of 911 as speed dia Key 9. Contact your service provider for details. 21 Quiet Mope This instant quiet feature silences all incoming ring tones, turns off DTME touch tones and silences alert tones with one touch of a key. Use when entering 4 meeting, library, movie or other places where you do not want your phone to ring. To turn on or off Quiet Mode,

> Quiet Mode overrides current tone settings but does not change them. To turn on or off Quiet Mode fram the menu, To quickly turn off the ring of an incoming call, You can turn on or off the following alert tones separately. Ringer Alert tones -- p. 42 Voice Mail alerts -- p. 35 Text Message alerts -- p. 32 Calendar reminder tone -- p. 52 CONVERSATION OPTIONS Mute/UNMUTE Jo mute or unmute your phones microphone during conversation, press Mute i, The microphone turns off turns back.

> The microphone can also be muted by pressing Options /S} and selecting Mute. 22 ADJUSTING VOLUME Shortcut to adjust volume during conversation, If you are not in conversation while adjusting volumes, a sample tone will sound after each level change to judge the effect of the change. SENDING DTMF Toucu TONES You can send Dual Tone Multi-Frequency (OTMF) touch tones to communicate with computerized systems, such as answering machines, voice mail or banking-by-phone. These tenes can also be used for credit card calls or long distance calling cards. A DINE touch tone is a digit or string of digits that produces tone signals. DTMF strings can also be stored in the Phone Book. Refer to Storing Numbers on page 36. MANUALLY To send DTME touch tones directly from the keypad during conversation, ah api = with 23 AUTOMATICALLY To send a consecutive string of DTMF tones during conversation, AutaDTME SILENT SCRATCHPAD Use the phone as a memo pad to store num

bers during a conversation yall confint the entry CALL WAITING If your service provider offers Call Waiting, then your phone can receive a second call while one is in progress. 46s iit daring a conwersatio thee:

and a Incoming call or call waiting display if offered by your service provider, use the \t) key as the Hook- Flash button to switch between active calis or initiate a three-party conference call. 24 DIALING OPTIONS Pause DIALING Telephone numbers and a sequence of DIMF touch tones can be en-

tered in the display or stored in memory together if they are separated by a Pause. At each Pause, press (4) to transmit the DTMF string. hihe: P character SECRET PAUSE DIALING Use Secret Pause Dialing to store secret numbers such as credit card numbers or passwords in the Phone Book which number may be used to access a DIMF system such as Voice Mail, banking by phone, or credit card calls. Secret Pause displays the DTMF digits as 7??? on screen ta keep the digits hidden. To in oN 3@ returned to the entry screen with the SP character now at the end of the telephone number, Shortcut: Press and hold @) for 15 seconds. 10. ime:

4 > Enter DIMF key sequence you want to send:

5. Repeat step 2, 3, and 4 to add more DIME stings 6 Press We) to dial the numba :

she 25 1+ DIALING MODE To add 1 to a telephone number in order to make a long distance call, EDITING PHONE NUMBERS There are two ways to correct or edit digits while entering phone numbers. One way is to press Clear ) to erase each digit from the end of the entry until you reach the incorrect digit. An easier way is to use the Edit dialing option. To edit a telephone number, 1 While the desired telephone number is displayed, press Ci

: aod scroll down to select Egit, ee ibe retucs F ;

26 Menu System The easy-to-use menu system is where all af the phone's features and functions settings are stored. Access the menu system by using the Express Key and the softkeys. You can alo access features and services you have requested from your service provider. ACCESS TO THE Menus

* Press flabeled MEM) to go to all stored telephone numbers in the Phone Book.

* Press G@ {labeled MENU) to enter the Main Menu at any time.

* All other functions and features are then selected by pressing or Select .

* To return to a previous menu, press or Exit O.

* To exit from the menus to the standby screen, press and hold Exit }

or if no call is in progress, press (ey). The display window at the Main Menu screen appears as either of these Picture Based menu screen Text Based menu screen You can choose the appearance of the Main Menu screens. The Picture Based screen is the default setting. See page 41 to change the Main Menu screen to Text Based. DEFAULT SETTINGS Most menu items have a default setting that allows you to return the item to its original factory setting. These default settings are listed with their menu items, beginning with SMS Message Alert Tone, page 32. Note: Some service providers may choose to set different default settings than those fisted in this manual. 27 T300 Menu Map Text Messoges InBox OuiBox *

Create New *

Olen Used *

Alert Tone Storage Free Voice Mail Listen Number Alex Tone Phone Book. Recall Entry Store Number Remaining Locations Own Number Speed Dialing Emergency 9 Call Settings fusn Answer edicl ween Nuorber Display Settings Bucidighting ThiK Lame Display Tone Settings coy Map LEGEND SBHRGS = First menu level Coll Settings = Second menv level ou prawer m Third menu level Time Settings anefDate Total Privats Operating Secunty:

Restriction Privote Mode Residentiol Network Set Lock Code Set Security Code Tolk Timer Rese!

Raset io Default ice Tools Celendar Memo Pad Calculator Network Selction Monual Search New Search

* appears if offered by service provider and subscription purchased 28 ENTERING TEXT Jo store names in the Phone Book, use the Calendar, use the Memo Pad or write SMS text messages, you will enter and edit text in the display. In the upper right corner of the display, the au icon indicates lower case text mode and the . icon indicates upper case text mode is active. Text and numbers can be now be entered or edited directly fram the keypad. ed key one, two Example To enter Card in the Memo Pad, 1, 2 3. Press CB, then press ) three times to select Office Toals Select Memo Pad, then select Write New Memo. Press @ to go to upper case mode, wt" icon is displayed. Press @

briefly three times, C appears in the display. Wait for the cursor to move or press (} to move to the next position, notice that a is displayed. Press @ briefly once, a appears. Press @ briefly three times, r appears. Press @ briefly once, d appears. The word Card will now be in the display. Press (AJ to exit from this example. 29 ENTERING SPECIAL CHARACTERS Shortcut for entering punctuation marks, press CO from one to: toventer spate. @ Peete

> Press and hold Dt Oo enter digit Shortcut for entering bracket symbols, 30 TEXT MESSAGES SMS text messaging is a Network Service that enables you to send or receive shart text messages to or from other PCS phones with the same capability, The messages are not sent directly to the other mobile phone but go via your service provider's message center, You can also use the OutBox to store, edit, and forward messages as well as saving any of the numbers they contain. The message length capacity of the phone is 255 characters, but it may be less depending on the network's capability. Some service providers support SMS or email text messages receipt only. In this case, the menu options that will appear are InBox, Alert Tone, and Storage Free. READING A New SMS or Emalt Messace An audio alert and Network Message screen signal the arrival of an SMS text message

* Each message header displays the sender's cafl-back number or name if it matches Phone Book entry, date/time stamp, first line of message, message state, message urgency, and number of messages

* These message state icons in the message header indicate:

2) Unread (new) message Mt) Read message BS Locked message Message urgency is indicated by:

ay Emergency Urgent

(blanky Normal

* Use Q and to scroll between pages or between messages.

{f & appears, the SMS message storage !s full, Delete old messages to be able ta receive new messages.

* Ifyou skipped past the Network Message screen, the message icon &

appears to remind you of a new text message waiting. 31 MANAGING Text MESSAGES After reading the text message, press Options fs for these options:

Item cFunctlon. Delete Message Deletes the message Read Message Lock Message Displays the remainder of the text Locks the message so it will not be auto-

matically deleted when memory is full Callback Number

}Galls or stores the number(s) contained in the SMS header or text. Press Send key to dial number. Press Store fs) to store in Phone Boo k. Reply *

Replies to the sender of the message Forward *

Forwards the message ta another phone Delete All Messages Deletes all SMS text messages

* Options appear only if service provider supports sending SMS messages and subscription is purchased. SENDING A New SMS 32 oR EMAIL TEXT MESSAGE OuTBox MESSAGES The QutBox contains unsent draft messages and stored sent messages, identified by their headers. These messages can be selected from the Out8ox menu and can be modified and resent as new SMS messages To select an OutBox message, Read Message Delete Message | Deletes the message Edit & Send Edits the message, then Send options appear 33 SMS ALERT TONE the Standby screen Default = Tone 2 STORAGE FREE -- AVAILABLE SMS MEMORY ew the amount of available memory in the InBox and OutBox, Te vi 34 Voice MAIL You can receive Voice Mail Your voice mail box must before receiving voice mail offered by your service provider. 1 messages if ervice provider first be set up with your 5 messages. Listen An audio alert and Network Message screen signal the arrival of a new Voice Mall message the voice mail center number to listen to your Voice Mail To dial messages, qe ipiessand hold 2. :

SET NUMBER If a voice mail cent the Set Voice Mail set up s be er number is not entered, you will automatically go to reer. Voice MAIL ALERT TONE when a new Voice Mail diy screen will alert tane to announce Choose a tone or no If no alert tone is chosen, the stan message is received, still display the Voice Mail icon ?. To choose a Voice Mail Ajert Tone, Default = Tone 1 35 PHONE Book Names and numbers can be stored directly in the Phone Book or moved from other stored areas such as from Text Messages, Memo Pad, or Last Dialed Number list, etc. The Phone Book stores up to 100 entries, each consisting of Name (up to 16 characters) and Number (up to 32 digits). See page 29 for instructions on entering text. STORING NUMBERS There are three ways to store numbers into the Phone Book.

* Directly from the standby screen

> Press Clear @) to erase a digit or press and hold Clear @) to erase entire entry, Also see Editing Phone Numbers on page 26. Using the menu Foo ePress Cy Select Phone Book. Select: Store Number:

Enter the. phone number. and press OK (). i:

an Bow

* From other stored locations Numbers stored in the Last Dialed, Received Call, and Unanswered Call Lists, as well as in the Silent Scratchpad, Memo Pad and Text Message lecations can all be stored in the Phone Book.

| ber 2 Follow the display instructions,

* The characters *, #, P (Pause) and SP (Secret Pause) can be stored together with numbers. See Pause Dialing and Secret Pause Dial-

ing on page 25.

* If the Phone Book is full, a warning message appears when selecting the Phone Book, 36 VIEWING AND DIALING NUMBERS Phone Book entries can be recalled into the display to be edited, deleted or dialed. There are two ways to view and dial numbers stored in the Phone Book,

* Directly from the standby screen

* Using the menu accessed in the Phone Book. The list of Phone Book entries will be displayed in alphabetical order together with the telephone number. Press ) or to scroll through the Phone Book. For quick access to another entry, press a number key to ga to the first alphabetic entry corresponding with the first letter on the key. For example, to go directly to entries starting with

'P press @

Press Options [9 to display the following men itera pee Runction |

Edit Edits the name and number entry Delete Entry Deletes the entry Call Calls the number displayed 5. | Press Exit

[OF Cito return te the standby screen, REMAINING LOCATIONS To see how many Phone Book locations have been used and how many are available:

Own Numeer Disptay You can view your own phone number in the Ph SPEED DIALING Phone Book numbers can be assigned to Keys 2 - 9 which when held down will dial those numbers. Key 1 is reserved for the voice mail center number and cannot be changed. To assign Phone Book numbers to the speed dialing keys,

* When you scroll to Key 9, if Emergency 9 is set to Yes, then Key 9 will be fixed to speed dial Emergency 911.

* if you live in an area that uses a different Emergency number and your service provider has programmed that number to the phone, then Key 9 will speed dial that Emergency number.

* If Emergency 9 is set to No, you can assign any Phone Book entry to Key 9. 38 EMERGENCY 9 SPEED DIAL SETTING To control whether Speed Dial Key is automatically set to dial the emergency number, Default = Yes SETTINGS This menu option allows you to customize your Call Settings, Display Settings, Tone Settings, Time Settings, and lock your phone. CALL SETTINGS AUTO ANSWER When the phone is connected to a handsfree car kit or headset, the phone will automatically answer an incoming call after S or 10 seconds without having to press any keys Osec. or off. Press Sel fuiri to the standby:screen, :

Default = OFF AUTO REDIAL When set to On, the phone will auto matically redial a failed call up to 10 times, when due to a busy system or unavailable signal from the network. Default = Off

* When set to On, Redialing appears each time a redial call attempt is made. Press Cancel @ to end dialing for that call. 39 SEND OwN NUMBER (OUTGOING CALLER ID) This Network Service allows you to send or disable sending your phone number as Caller {D information when you make a call. If you do not want your phone number to appear on the receiving person's phone, set this feature to No Jo send or disable sending your phone number as Caller ID, 6. then select Call'Se Default = Yes

* When traveling outside of your local network service area, this feature may not work or let you make a call. Set feature to Yes. DISPLAY SETTINGS BACKLIGHTING This option controls the backlighting during key entry and incoming ring tone. The two settings are:

Off -- backlight stays off. Off after 10 sec. -- Display and key backlight stay on for 10 seconds after the last key press of during an incoming call. Pless CQ. Select. Settings, thenselect: Dis p Settings. Select: Backlighti :

Wo urty ( the standby screen:

Default = Off After 16 sec. CONTRAST You can adjust the contrast of the display using 4 7 level bar scale. lect Di Default = Middle Level 40 LANGUAGE The phone menu screens can be displayed in one of four languages:

English, French, Spanish, or Portuguese. To select the language of your choice, Default = English

* To reset the phone language to English, enter *#0044#. Main MENU FORMAT Choose whether you want the main menu selections to display in picture format or text format. aVoice Mail HPhone Book Rone ano Picture Based menu screen Text Based menu screen To select the main menu format, Oefault = Picture Based TALK TimeR DISPLAY The Talk Timer appears when a call connects and displays the duration of an on-gaing call. To turn on or off the Talk Timer display, or eto return to the standby screen. Default = On 41 TONE SETTINGS RING TONE Choose the sound of the incoming ring tone from a stored selection of 5 rings, 2 tones and 8 melodies. To hear your chosen ring tone or melody, scroll to a selection. Wait a few seconds and it will play. To select a ring tone, ALERT MODE This feature allows you to set the method or turn off the incoming ring tone, alert and reminder tones. AL. Press Ch. Select Settings, then select Tone Settings. Vibrate Only, vi 9, Press Select Default = Ring Only none Phone will ring for all ring tones

| Backlight flashes & LED light flashes green 3Eg | Vibrate Only Phone will vibrate for all ring tones & alerts. tig | Vibrate then Ring IF incoming call, phone will vibrate first, then ring. If SMS, Voice Mail or Calendar alerts, phone will vibrate but no ring will be heard. Phone will vibrate and ring at the same time for all ring tones and alerts. Eg | Vibrate and Ring

* Ifa Vibrate option is chosen, the phone still vibrates in Quiet Mode.

* If Quiet Mode is in effect, any changes to Alert Mode will not cancel Quiet Mode but will take effect when Quiet Made is turned Off. 42 VOLUME ADJUSTMENT Adjust the volume of the incoming ring tone, key presses, and your callers voice. Wo Pree

(Tone Settings.

{pI araoonoMeniot pen, Tf Speech SJ] Yolume aati Default = Middle Level

= Asample tone will play after each level change to hear the change in volume {if not in conversation).

* The volume cannot be set to zero, except for Key Volume. Use Silent Alert Mode to silence the ring tone completely. See Alert Mode on page 42 Shortcut to Key Volume adjustment, During & call, pre or GY RaAMPING RINGER Ramping causes the incoming ring tone to gradually increase to maximum volume level if the call is not answered after the first ring Pies (5 Select Settings, then select Tone Settings Default = On 43 VoIce PRIVACY TONE if your network supports the Voice Privacy feature, your call will be encrypted so that no one can access your call. Your phone always attempts to use voice privacy mode during a call. if your service provider's system does not support this feature or if the phone is on an anajog channel, the Voice Privacy Off icon g& appears on the left side of the screen and a warning tone sounds. You can turn this warning tone on or off. ss). Sele QUIET MoocE This instant quiet feature silences all incoming ring tones, turns off DIMF tones and silences alert tones with one touch of a key. Use this when entering a meeting or a theater, for example. Shortcut to Quiet Mode, Mode overrides current tone settings but does not change Jo turn on or off Quiet Mode using the menus, 1. Press C5. Select: Settings; then slect Tone 2. Select Quiet Mode. 3 Select On OF OF. Press Sele to contin:

4: Pies? Exit G\or ito return to the standby scr ettinigs. Default = Off

* Quiet Mode setting is not retained when the phone is turned off. 44 TIME SETTINGS You can choose how the time and date appear on the standby screen, as well as the time/date format in Text Messages. To choose whether the time appears in am/pm ora 24 hour clock Default = ampm Ta choose the order of how the month, date and year appear, flor iodo retuien to the standby scree 3 Default = MM/DDIVYYY SET TIME & DATE To set the current time and date on the clock in the standby screen, 1). Press (': Select. Settings, then select. Time Settings, Set Time utes high 45 Press Exit (\ anytime during this process to exit the menu without a change.

* The Set Date screen will appear in the same format as the chosen Date Format menu option.

* The Set Time screen will appear in the same format as the chosen Time Format menu option {anvpm or 24 hour).

* The range of years in the Set Date screen is 1980-2079.

* An internal battery maintains the date and time setting for up to 3 hours when the phone is turned off and without a battery, of with a completely discharged battery attached. After this 3 hour period, you may need to reset the clack when the phone is turned on again. AuTo Lock Auto Lock prevents use of the phone by anyone without the Lock Code, When Auto Lock is enabled, you must enter the 3-digit Lock Code each time the phone is turned on. To enable or disable Auto Lock, bw Default = Disable

* The default Lock Code is O00. We recommend that you change your Lock Code then write it down and store it in a separate place. To change the Leck Code, see Set Lock Code on page 56. 46 CALL HISTORY Details of incoming and outgaing calls, duration of the last call, and accumulated totat of all calls made are stored in Call History menu. CALL Logs The last 10 numbers dialed, the last 10 received call numbers, and the fast 10 unanswered call numbers are stored in the Call Logs. To view or dial @ number from the Call Logs, Wc Press: Ch. Select Call History.

: 2 Select Call Cogs. 3... Select Last Dialed Numbers, Received Call List, Unanswered Call Lis! : He ee Press) OF 49 screll through the call lists:

The most recent number dialed or received is displayed first. For received and unanswered calls, if the caller's number is in your Phone Book or sent by the network, the name is shown. If not, Unknown number displays. Stores the name and number in the Phone Book Delete Entry Deletes the entry Delete All |_Deletes all the entries Edit | Edits the name and number entry Store Number GB Press Exit or @ to return to the standby screen. 47 CALL TIMERS The length of the last call and total accumulated time of alt calls are stored in the Call Timers menu. To view Call Timers, Last Calk Talk time for the last call in minutes and seconds Total Public Accumulated talk time in hours and minutes when making calls om Public Systems Total Private | Accumulated talk time in hours and minutes when making calls on Private Systems Operating Accumulated talk time in hours and minutes when making calls on both Public and Private Systems 4. Press Exit @\or Gite returns to the stindby

* To reset all of the call timers except the Operating Timer, see Reset Talk Timer on page 57.

* Since the accumulated talk timers do not have space to count sec-

onds, they work by counting each call as at least one minute in length, even if the call lasts less than one minute. For example, if you make 4 fifteen second calls, the accumulated talk timer will count 4 minutes of talk time used, not one minute. 48 OFFICE TOOLs Office Tools menu contains a Calendar to keep track of appointments, a Memo Pad and a Calculator. CALENDAR Use the Calendar to keep track of appointments, meetings and speciat events. You can even set 4 Reminder tone to alert you when appoint-

ment time approaches. Up to 50 Calendar events can be stored. There are two types of Calendar events; Appointment and All Day Event. Appointments have a start and end time, and Ail Day Events last an entire day, such as an anniversary. New APPOINTMENT To enter a new Appointment event, Enter subject and press OK () Use 2) of ) to scroll to the desited Recurrenice pattern and press Select /@). :

Somme Recurrence options have a highlighte 49 New ALL Day Event To enter a new All Day event, REMINDER TONE NoTEs You must leave the phone GN for the reminder tane to work. If the phone is OFF, the reminder tone will not sound at its scheduled time. If the phone is OFF when a reminder tone is due, then an Overdue Reminder screen will display when the phone is turned ON. Press OK ) to clear the Overdue Reminder. View CALENDAR To view the Calendar,

: Press: Ci Select Office Tools, Select Calendar: =

_ Select View Calendar. A scieen, displays

| apouthe The cutrent dat ow

* Days that have events scheduled will have the date highlighted.

* Use or keys to scroll by week from the blinking cursor location. Use or (3 keys to move one-by-one through the days of the week. 50 To view a scheduled event, So HuHaDaaoMnORONNHTOHION Meeting 2 Ee 2/14/00 1200 em Es BY 14/00 11:00 pra

ah 30 Minutes SOPtIONS Faso ths Appointment detail screen sg gsorongeoripangtien SEB Valentine's Vay i 2f14s00 214/00 No Reminder sOptions E All Day cetail screen

* In the detail screen, S indicates Start date and time. E indicates End date and time. R indicates if Reminder tone has been set and if so, the time it will sound before the event time. {f event is All Day, only start and end dates will display. 4. Press Options /*) Jor the. following menu:

a item j oo BeROR Edit | Edits the Calendar entry View Recurring pattern displays; for example, Recurrence every week on Mondays, or every month on the 24th, Delete Entry | Deletes the selected Calendar entry So Press Exit ior G/ to retura to the sta View ALL EVENTS To view all events in the Calendar, to the: standby scleen. 51 DELETE PAST EVENTS You can clear out non-recurring appointments or events that are over. To delete all non-recurring past events in the Calendar, CALENDAR REMINDER TONE To choose a Calendar Reminder Tone, Tone 5. :

Bach:

Default = Tone 3 52 Memo Pap The Memo Pad allows you to store up to 10 separate entries of 20 characters each. The characters can be letters or numbers. To write a memo, cribed on page 29. Memo Stored displays, To read, edit or dial a number from a memo, Edit ~ | Edits the Memo Call Number Stores or calls the number(s} contained in the Memo. Press Send key to dial number. Press Store { to store in Phone Book. Delete Entry Delete All Deletes the selected Memo entry Deletes all Memo entries SB Press ERIC org to return to the standby screen,

* You can also press and hold |) while viewing the Memo to dial the number contained in the Memo 53 CALCULATOR The calculator allows you to perform simple calculations using

+ (addition) - (subtraction) x (multiplication} + {division}

+/> (sign invert) To use the calculator, Press desired numbed keys toenter digits: Ae Use Cy to-move right to highlight the desired operation, Press Select () to select (L The symbol appeals on $c:

ext dio! cS :

* Press @ to enter a decimal point.

* Press Clear @) to erase an entry. If Clear @) is pressed after an calcula-

tion has been performed, the result will be erased, Press and hold Clear ) to erase the calculation 54 SECURITY The Security menu allows you to control calling restrictions, control if the phone can be used in Private or Residential systems, change the Lock and Security Codes, and reset the Talk Timer and default settings. To enter this menu, you must type in your 4-digit Security Code. When entering your Security Code, the digits appear as **** on screen. If you make a mistake, press Clear @\ then enter the correct digits. The default code is 0000. We recommend that you change this code at once and write it down and store it in a separate place. Contact your service provider if you have lost your Security Code If an incorrect Security Code is typed in, Invalid Code message dispiays and you are returned to the previous menu sceen, CALL RESTRICTION This option allows you to place restrictions on the type of calls made from the phone. The three types of restriction levels are:

tii No Restriction | Ali types of calls are allowed Recall Only Calls dialed only from Phone Book entries are allowed. New or edits to Phone Book entries are not allowed, Receive Only Incoming calls can be answered but no outgoing calls can be made. Phone Book access is blocked.

* For Recall Only and Receive Only options, numbers cannot be entered from the keypad, and manual OTMF transmission is restricted.

* Emergency calls are allowed at any restriction level.

* When the phone is in Private Mode, there are no call restrictions, even if the phone is set to one of the restriction levels. To set a cail restriction level, all Ouly, or Recewe Only. dby scree :

Default = No Restriction 55 PRIVATE NETWORK Use this menu option to set up your phone to use a private system. bie RESIDENTIAL NETWORK Use this menu option to set up your phone to use a residential system. SET Lock CopE Set Lock Code allows you to change your 3-digit Lock Code, used when Auto Lock is active. Aute Lock prevents use of the phone by anyone without the Lock Code. When Auto Lock is active, each time the phone is turned on, you must enter the 3-digit Lock Code to use the phone. To change the Lock Code, aw:

Press OK y=) to save the new: code. Press Exit lor 6 to. retuin'to: the standby screen wt Default = 000 56 SET Security CODE The Security Code allows entry into the Security menu. To change the Security Code, Default = 0000 RESET TALK TIMER Reset all of the Call Timers except the Operating Call Timer. To reset the Call Timers, Default = No RESET TO DEFAULT Use Reset to Default to revert the phone settings back to the factory default settings. This does not affect the Phone Book or Text Message inBox and OutBox. Note: Some service providers may choose to set different default settings than those listed in this manual. To reset the phone to default settings, Select Yes or No. Press Selects 5 Press Exit fol oF ji to tetiiny to the standby screen: =

Default = No 57 Factory default settings are:

58 1s ep Feature cos SMS Alert Tone Default setting Vaice Mail Alert Tone Emergency 9, Send Own Number Auto Answer, Auto Redial Backlighting Off After 10sec. Contrast, Volume levels Middle ievel Language English Main Menu Format Picture Based Talk Time Display On Ring Tone Ring 1 Alert Mode Ring Only Ramping Ringer, Voice Privacy Tone On Time Format arvpm Date Format Mi/DD/YYYY Auto Lock Disable Calendar Alert Tone Tone 3 Call Restriction None Network SELECTION Use this menu to select a Network System when you are out of your home cellular service area. To search for all available network systems in the area,

* If no systems can be found, No Service message appears. To locate new private network systems in the area, If no systems can be found, No Service message appears. 59 60 ACCESSORIES

' Headset (earphone + microphone) i Simple Holder with bracket (mounts in car to hold

| phone) Standard battery (Lithium lon) Desktop Battery Charger (for phone + spare battery) AC Rapid Charging Adapter 1 20V (for battery charging using wall outlet}

Cigarette Lighter Adapter ~ plug one end into car cigarette lighter, other end inte phone jack to use

:and charge phone in your car Belt Clip w/Button Data Cable To purchase accessories, contact your service provider or shop online at www. mitsubishiwireless.com. Do you have questions about accessories or would you like to place an order by phone?

Our trained accessory specialists are ready to assist you. Please call toll free 1-877-581-8776 M-F 5:00 am - 9:00 pm PT Sat 6:00 am- 8:00 pm PT Sun 10:00 am - 7:00 pm PT 61 GLOSSARY Term AMPS, Analog system Cellular Coverage Conversation made DIMF Dual band Dual mode Digital tcD LED Mobile system 62 Description Advanced Mobile Phone System. Analog system used in the United States for celiular telephones. Variable waveform system of voice transmission instead of the zeros and ones used by a digital system, Wireless communications system that uses many base stations to divide a service area into multiple cells. Cellular calls are transferred from base Station to base station as a user travels from cell to cell. Geographical reach of 2 mobile phone network or system. When the phone is making or receiving a call Dual Tone Multi-frequency Tones, or touch tones. Each key pressed generates a unique frequency which the phone company recognizes as a particular digit Mobile phone that works on different frequency bands; 800 MHz cellular and 1900 MHz PCS frequencies. Mobile phane that works on both analog and digita! networks. Wireless communication technology that converts ali voice transmissions to computer language

(zeros and ones, or binary language) and then feconstructs them into the original voice format at the other end Liquid Crystal Display. Flat screen used to display Numbers, characters, icons and pictures. Light Emitting Diode. Light on a handset that alerts the user of various conditions or functions. Transmission of radio signals to or from a centrally located antenna attached to a mobile telephone switch, PCs Roaming RSS|

SMS Standby mode Standby time Service provider Talk time TDMA Wireless communication Personal Communications Services. Collective term tor group of three American digital cellular phone technologies in the 1900 MHz frequency band. These are GSM 1900, COMA IS-95, and TOMA 18-136. Make and receive calls in places outside one's home calling area. Received Signal Strength Indicator. Short Message Service. Available on digital networks allowing text messages to be sent and received via the network operator's message center to your mobile phone. When the phone is on and registered to a network but not making or receiving a call. Amount of time a fully charged wireless phone can be on before the phone's battery will lose power. A company that provides services and subscriptions to telephone, mobile phone and Internet users. Length of time one can talk on a wireless phone without recharging the battery. Time Division Multiple Access. Digital radio technology in which the frequency band is split into a number of channels which in turn are stacked into short time units so that several calls can share a single channel without interfering with one another. TDMA is also the name of a digital technology based on the IS-136 standard. Radio-based systems that allow transmission of telephone and/or data signals through the air without a physical connection, such as a metal wire ar fiber optic cable. 63 TROUBLESHOOTING

* If the phone is new, see Charging the Battery on page 7. Otherwise, recharge or teplace the battery The phone does not * A battery is required to use the handsfree work with the adapter; verify a charged battery is handsfree adapter installed on the back of the phone. Verify the phone is attached to the adapter. lace the Nu mbers cannot be * Keypad Lock is turned on (@ is displayed). entered into the display press UnLock @\, then press @. Phone numbers Cannot + Call restrictions may be in place. See Gall be dialed: estriction on page $5. :

Callscannot be madeor * The signal strength will depend on your received; dropped calls location. Check the received signal strength indicator sal and make sure your antenna is fully extended, and try again after the signal strength increases (another bar appears). In addition to geographic location, the signal will weaken behind walls, under bridges, in tunnels, or other obstructions. dig vo!

vaya speed travel:

64 Display MESSAGES Phone Locked * To use the phone, the 3-digit Lock Code must first be entered Battery Full! s tte has finished charging. Charging The phone i is charging normally while powe off. Since the phone is off, you cannot make or receive calls.

* You can press the @f key to turn on the phone and operate it normally. The battery will con-

tinue to charge. Low Battery! and = * The battery is about to run out. The phone phone beeps should be turned off and the battery recharged or replaced. The phone will turn itself off within one minute. Keypad Loek 4 ds actwated dental key press Bee tum off thls. :

No Service Phone cannot connect to the network {call s can not be placed or received), either because the signal is too weak or the local network does not support your phone. Try moving to another location to use your phone.

* The Vore Mall Cetter phon nutiber must be setup before using Voice screen Will prompt to add a voice! mail number Enter the number press OK Pandit willauto-

matically diat i prevents acch 65 INDEX 1+ Dialing Mode . 26 A Accessories ...... Adjusting Volume . Alert Mode Alert Tone Calendar Reminder... 52 Ringer .... 42 SMS Text 32 Voice Mail . 35 Answering a Call Auto Answer Auto Lock ... Auto Redial . AutoDTMF, Sending . Backlighting 0.0.0.0... Basic Phone Operations . Battery Attaching Charging ... -

Battery Use eee 2 c Calculator .. Calendar .. Calendar Reminder Tone Calendar, View... Call History ....... Call Logs ........ Call Restriction ..... Call Settings ........ Call Timers . Call Waiting Call ANSWETING ee. 13 66 Ending oe 1B Making ..... devine WZ Callback Number ..... 32, 36, 53 Galler 1D, Send Own Number 40 Care and Maintenance ........ 19 Changing Faceplate ............. 10 Charging Battery CONTASE eee Conversation Options .......... 13 DB Daily Schedule 51 Date & Time, Set . 45 Date Format .. a5 Defauit Settings Default, Reset to . vee Delete Past Events-Calendar 52 Dialing a Number Cialing Options ... Dialing Stared Numbers Display Icons oo. eee Display Messages Display Own Number Display Settings ......... DTMF Touch Tones Send Automatically ..... 24 Send Manually....... Editing Phone Numbers ....... 26 Emergency Key 9 Speed Dial Setting ..... veces 3D Emergency Calis ve 24 End key oo... wa 2,3 Ending a Call wo. 13 Entezing Special Characters . 30 Entering Text bee 29 Express Key we 2,3, 4 F Faceplate, Changing .......... 10 G Getting Started Glossary ........ H Hook-Flash button ...

(cons, Display .

(nBox ........ insert Often Used wo. 32 K Key Symbols Key Volume Keylock ...... Keypad Layout L Language . 44 Last Call ... 48 Last Dialed Numbers 20, 47 LEO light ........ Listen-Voice Mail Lock Code, Set... Leck, Auto--Phone Lock . Lock, Keypad wn... M Main Menu Format .. o Al Making a Call ....... 12 Managing Text Messages ... 32 Manual Search, Network .... 59 Memo Pad ........ a. 21, 53 Menu Format ... 41 Menu System ... Messages Display... 6A Network ... Mute/Unmute ... Network Private 0... Residential .... Network Messages . Network Selection .. New All Day Event ....... New Appointment .... New Search, Network Numbers StOTING i BE Viewing and Dialing .... 37 0 Office Tools ... OnOtt key Operating-Call History OutBox Messages Overview .......... Own Number Display ... Pp Pause Dialing wo... 25 Pause Dialing, Secret . 25 Phone Book 2.0.0.0... BE Emergency Key 9 .. 39 Own Number Display .. 38 Remaining Locations ... 37 Speed Dialing .............. 38 Storing Numbers ......... 36 View and Dial Numbers 37 67 Phone Overview Private Network Problems ........... Q Quiet Mode ............ 13, 22,44 R Ramping Ringer .....0.0...0. 43 Reading New Text Message . 31 Recalf Entry ....... weve OF Received Calf List . 20,47 Remaining Locations-

Phone Book 37 52 57 5?

.. 56 22,44 Reminder Tone . Reset Talk Timer . Reset to Default .. Residential Network . Restore . Ring Only . 42 Ring Tone 42 Ring Volume woe 43 Ss Safety information .............. 16 Scratchpad, Silent . 24 Secret Pause Dialing .......... 25 Security oe ee 55 Gall Restriction .0..0..... 55 Private Network .......... 56 Reset Talk Timer .......... 57 Reset to Default ......... 57 Residential Network 56 Set Lock Code ..... 56 Set Security Code 57 Security Code, Seto... 57 Send key ... 2,3 Send Own Number

{Outgoing Caller [D).... 40 Sending New Text Message . 32 Set Lock Code wo SE 68 Set Number-Voice Mail ....... 35 Set Security Code ... Set Time & Date Settings ......... we Auto Lock on 46 Cail 39 Display 40 Time 45 Tone 42 Silent Scratchpad ... Silent-Alert Mode SMS Alert Tone .... SMS Text Alert Tone 0.0... Softkeys ee 2,3,4 Special Characters, Entering 30 Speech Volume ...0......... Speed Dial, Emergency Speed Dialing .... Standby Screen Starage Free (Available SMS Memory) Storing Numbers .... T Talk Timer Display ..... Talk Timer, Reset -

Text Messages ..... Alert Tone 0... Callback Number Managing ........... Reading Sending .... Sending New Storage Free Text, Entering ... Time & Date, Set . Time Format ..... Time Settings .... Tone Settings .. Tone, Ring ........ Tone, Voice Privacy Total Private .. Total Public... Al Touch Tones (DTMF)............ 23 Troubleshooting Turning Off the Phone Turning Gn the Phone .. U Unanswered Cali List. 20, 47 Unlock Keypad ....... we 14 Using this Guide we 4 Vv View Ali Events-Calendar .... 514 View Calendar .......... 50 Viewing and Dialing Numbers37 Voice Mail ...........+

Alert Tone Listen .... Set Number . Voice Privacy Tone... 44 Volume Volume Adjustment 13, 23, 43 69 70 ONE YEAR LIMITED WARRANTY MODEL T300 Mitsubishi Wireless Communications Inc. 3805 Crestwood Parkway, Suite 350 Duluth, GA 30096 800-866-6600 Mitsubishi Electric Sales Canada Inc, Corporate Service Division 4299 14th Avenue, Markham, Ont. L3R 032

{905) 475-7728 Mitsubishi Wireless Communications, Inc. (MWC1I) warrants this product to the original purchaser (Purchaser) against defects in material and workmanship as set forth below. If ownership of the product is transferred, this warranty is terminated. This warranty applies only to product purchased or repaired in the United States or Canada For the period of time specified below from the date of first retail purchase, MWCI shall at its sole and absolute opinion either repair or feplace the defective product or part with a new or comparable refurbished product or part. Mitsubishi brand accessories are covered under this warranty for one year, Batteries are covered under this warranty for 90 days. Carrying cases are covered under this warranty for one year. To obtain warranty service in the US, please contact MWCl at 1-800-866-

6608 to obtain the nearest location of the MWC! authorized service center so as to make arrangements for repair or replacement. To obtain warranty service in Canada, please contact Mitsubishi Electric Sales Canada, Inc. (MESCA) at ($05) 475-7728 on at the Canadian address above. Purchaser must present proof of purchase in the form of a retail bill of sale, invoice or other document that witl show that the product is within the applicable warranty period. No charge will be made for parts or labor directly related to the repair or replacement of the defective product or part. The repaired or replaced product will be warranted for 90 days from the date of return shipment or for the balance of the original warranty, whichever is longer. Repair or replacement, as provided under this warranty, is the only remedy provided to the purchaser. MAVCI SHALL NOT BE LIABLE FOR ANY 71 INCIDENTAL OR CONSEQUENTIAL DAMAGES INCURRED BY PURCHASER such as, but not limited to, interruption of service, loss of anticipated benefits or profits, or damage to any other equipment resulting fram the use of operation of the product, or arising trom breach of express or implied warranties on this product. MWC! SHALL NOT BE LIABLE FOR DAMAGE TO TELEPHONE EQUIPMENT, VEHICLES, AND/OR PERSONAL PROPERTY CAUSED BY IMPROPER INSTALLATION OR USAGE. THIS WARRANTY DOES NOT COVER FUSES OR CLAIMS OF DAMAGE DUE TO ALTERATION, ACCIDENT, MISUSE, ABUSE, NEGLECT, IMPROPER INSTALLATION OR MAINTENANCE, CONNECTION TO AN IMPROPER VOLTAGE SUPPLY, RECEPTION PROBLEMS CAUSED BY INADEQUATE SIGNALS, LIQUID SPILLS, OR OAMAGE THAT 1S ATTRIBUTABLE TO ACTS OF GOD. REMOVAL AND INSTALLATION COSTS ARE NOT COVERED BY THIS WARRANTY. COSMETIC DAMAGE, SUCH AS MARS, SCRATCHES, CRACKS, BLEMISHES, AND THE WEARING OF PRINTED LOGOS OR KEYS, IS NOT COVERED BY THIS WARRANTY. DAMAGE RESULTING FROM THE USE OF ACCESSORIES THAT ARE NOT MITSUBISHI BRAND ACCESSORIES IS NOT COVERED LOSS AND DAMAGE OCCURRING DURING TRANSIT ARE NOT COVERED BY THIS WARRANTY, Products repaired or replaced under warranty will be returned to the Purchaser transportation prepaid. Return shipping costs for out-of-warranty repairs shall be paid by the Purchaser. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS EXCLUDED EXCEPT WHERE PROHIBITED BY LAW, AND WHERE PROHIBITED, IS LIMITED TO THE MINIMUM PERIOD PERMITTED BY SUCH LAW. Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on an implied warranty, so the above limitations or exclusions may net apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State, or Province to Province. 72