FCC ID: BGBX1T161IMB22301 The Immobilizer System

] Locking and unlocking ) Keys EF21AAQ

{- Master key (Black) . 2- Sub key (Grey) | -.

. Three keys are provided. Two of them are master keys and the third is a sub key. The master keys fit all locks. Keep one in a safe place as a spare key. The sub key fits all locks except for the glove box. | . NOTE

(1) The key number is stamped on the tag as indicated in the illustration. Make a record of the key number and store the key and key number tag in separate places, so that you can order a key from your authorized MITSUB-. _ ISHI dealer in the event the original keys being lost. a

(2) The engine is designed so that it will not turn over if the ID code registered in the . immobilizer computer and the keys ID. code do not match. Refer to the sec-

tion entitled Electronic immobilizer for

- details and key usage.

(3) Keys should never be placed in areas which contain magnetic or metal objects as this may interfere with the Z\ CAUTION

(1) Keep a spare key or pieces of magnet/metal away when the key

(2) Be careful not to damage the

- key with a cutter etc. since there js a transponder irisitie the key.

(3) Don't make any alterations or additions to the immobilizer system; any alterations or addi-

immobilizer. (4) Three keys are provided. |

| : key from your authorized MIT-

SUBISHI dealer as soon as pos-

sible. me authorized MISTUBISHI dealer. If you need an extra spare key, take your vehicle and ALL the keys to your authorized MITSUB-

ISHI dealer. Because all the keys have to be re-registered in the

-Immobilizer computer unit. is turned to the ON position. tions could cause failure of the:

If you lose one of them, order a To make a key, take your vehicle and the remaining key.to your ~

transponder. NOTE

(1) The immobilizer allows-up to 8 differ-

ent ID codes to be registered; you can possess a maximum of 8 spare keys.

(2) Asystem failure is suspected if tum-

"ning the ignition key to START posi-

tion does not cause the engine to start. In such a case, consult an authorized MITSUBISHI dealer. |

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

_(1) This device may not cause harm-

ful interference, and (2) this device must accept any interference receiv-

ed, including interference that may 2 cause undesired operation. NO USER SERVICEABLE PARTS IN-

SIDE. DO NOT ATTEMPT TO MODIFY THIS EQUIPMENT. IF MODIFIED, YOUR AUTHORITY TO OPERATE THIS EQUIPMENT MIGHT BE VOID-

ED BY FCC.

~ Doors Operation from outside the vehicle.

{- Insert or remove the key 2- Lock 3- Unlock Electronic immobilizer

(Anti-theft starting system) EF11C-KD The electronic immobilizer is designed to reduce significantly the possibility of vehicle theft. The purpose of the system is to. immobilize the vehicle if an invalid start is _ attempted. A valid start attempt can only be achieved (subject to certain conditions), using a key registered to the ignition lock. Sa FI2A133A_ we EF12A-F8

5