Since this device is always used with vehicle, it is not sold to general end users separately. Therefore there is no user manual of this device by alone. This document is an excerpt from a user manual of vehicle. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC/IC This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device. Le prsent appareil est conforme aux la Partie 15 des rgles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. SMART KEY SYSTEM EAU61660 Smart key system The smart key system enables the fol-
lowing operations to be carried out without using a mechanical key. Power ON/OFF Engine start and stop Steering lock release and locking Seat lock release TIP To preserve battery power, the smart key will turn off automatically about a week after the vehicle is last used. Turn the smart key on before using the vehi-
cle again. EWA14703 WARNING Keep implanted pacemakers and defibrillators, as well as oth-
er electric medical devices away from the smart key system an-
tenna (see illustration). Radio waves transmitted by the antenna may affect the opera-
tion of such devices when close by. If you have an electric medical device, consult a doctor or the 1 2 3 4 5 6 7 8 9 10 11 12 device manufacturer about any risk of possible interference be-
fore using this vehicle. 1 1. Vehicle mounted antenna ECA15762 NOTICE The smart key system uses weak ra-
dio waves. The smart key system may not work normally in the follow-
ing situations. When the smart key is placed in a location exposed to strong ra-
dio waves or other electromag-
netic noise. When there are facilities nearby that are emitting strong radio waves e.g. TV towers, power plants, broadcasting stations, 3-1 airports etc. When you are carrying or using equipment communication such as radios or mobile phones in close proximity of the smart key. When the smart key is in contact with or covered by metallic ob-
jects. When other vehicles equipped with a smart key system are nearby. In such situations, move the smart key to another location and perform the operation again. If it still does not work, use the mechanical key to carry out the operation in emergen-
cy mode (refer to Page 6-1). Handling of mechanical key and smart key EAU61640 EWA17950 WARNING The smart key should be carried by the driver. Do not store it on the vehicle. When the smart key is within op-
erating range, exercise due care because other people not carry-
ing the smart key can also start the engine or operate the vehi-
cle. Included with the vehicle are one smart key, one smart key identifi-
cation tag, one mechanical key and one mechanical key identifica-
tion tag. Keep the mechanical key and tag separate from the smart key and tag. Should you lose the smart key, the mechanical key will serve as a back up. We also rec-
ommend that you note down the identification number in a just in case you lose the identification tag. 1 2 3 4 5 1. Mechanical key 2. Smart key 3. Smart key identification number tag 4. Mechanical key 5. Mechanical key identification number tag If the smart key and tag are lost or damaged, and there is no record of the identification number, all the parts of the smart key system will need to be replaced. The identification number of the smart key is displayed on the in-
side of the smart key. The smart key identification number (6 digits) and mechanical key identification number (1 letter + 4 digits) are dis-
played on the two respective iden-
tification tags as well. By inputting 3-2 SMART KEY SYSTEM the identification number of the smart key in an emergency, the engine can be started and the var-
ious locks can be released without using the smart key. Please refer to emergency mode on page 6-1 on how to operate the smart key system in an emergency. 1 1 1. ID number ECA21570 NOTICE The smart key has precision elec-
tronic components. Observe the fol-
lowing precautions to prevent possible malfunction or damage. Do not drop,bend, or subject the smart key to strong impacts. Do not allow the smart key to 1 2 3 4 5 6 7 8 9 10 11 12 SMART KEY SYSTEM get wet. Do not put heavy objects on top of the smart key. Do not leave the smart key in a place exposed to direct sun-
light, high temperature, or high humidity. Do not cut, drill, or attempt to modify the smart key. Keep the smart key away from strong magnetic fields and mag-
netic objects such as key hold-
ers, TVs, and computers. Keep the smart key away from electric medical equipment. Do not allow oils, polishing agents, fuel, or any strong chemicals to come in contact with the smart key. The smart key body may become discol-
ored or crack. TIP The expected battery life is ap-
proximately 2 years, but this may vary according to operating condi-
tions. The smart key uses battery power even when it is away from the ve-
1 2 3 4 5 6 7 8 9 10 11 12 hicle. If the smart key continually re-
ceives radio waves, the battery will discharge quickly in reaction to this. (For example, when placed in the vicinity of electrical products such as televisions, radios, or computers.) Replace the battery when the smart key system indicator light flashes for 20 seconds when the power of the vehicle is turned on.
(Refer to page 3-4 on how to re-
place the battery) If the smart key system indicator light does not come on when you press the lock / unlock switch, the smart key battery may be dis-
charged or the smart key may be faulty. After replacing the battery, contact your Yamaha dealer if the smart key system does not oper-
ate normally. You can register up to six smart keys for the same vehicle. Please contact your Yamaha dealer re-
garding spare smart keys. 3-3 EAU61670 Smart key 1 2 1. Lock/unlock switch 2. Smart key system indicator light This model is equipped with a smart key system. When the smart key is ac-
tivated and brought within range, the smart key system allows you to operate the vehicle without having to physically insert or remove the key. To activate or deactivate the smart key To activate or deactivate the smart key, press and hold the smart key button for approximately one secondto switch the smart key from on to off. When the smart key is turned off (deactivated), the vehicle cannot be operated even if the smart key is brought within range of the vehicle. Turn the key on (activate it) and bring it within range to operate the vehicle. SMART KEY SYSTEM from children. Do not expose the battery to di-
rect sunlight or other heat sources. ECA15782 NOTICE Use a cloth when disassembling with a screwdriver etc. Direct contact with hard objects may damage or scratch the key. Make sure you install the battery with the poles in the correct po-
sitions. Take precautions to prevent the waterproof seal from being damaged or contaminated by dirt. Do not touch the internal cir-
cuits and terminals. This may result in malfunctions. Do not apply excessive force to the smart key when replacing the battery. How to replace the battery 1. Open the case of the smart key. 1 2 3 4 5 6 7 8 9 10 11 12 EAU61600 How to replace the battery of the smart key Please replace the battery with in the following situations. The key signal light flashes for about 20 seconds when the power of the vehicle is turned ON. When the smart key system does not receive signals sent from the smart key. 1 EWA14722 1. Key signal light WARNING The battery and other remov-
able parts may cause injury if swallowed. Keep the battery and other removable parts away 3-4 SMART KEY SYSTEM 2. Remove the cover of the battery. 1 2 1. Switch plate 2. Battery cover 3. Note the polarity of the battery. 4. Remove the battery. TIP Dispose of the removed battery in ac-
cordance with local regulations. 1 2 3 4 5 6 7 8 9 10 11 12 5. Replace the battery with a new one. Battery used:
Button battery CR2025 1 unit 2 1 EAU61570 Mechanical key The mechanical key can be used when the smart key is lost or its battery is dis-
charged, or whenever the smart key system is not operating normally. The seat lock can be released, the cargo can be removed, and the vehicle bat-
tery can be replaced using the mechan-
ical key. To release the seat lock Inserti the mechanical key into the lock inside front storage compartment B and turn it clockwise. 1. Battery cover 2. Battery 6. Attach the cover of the battery. 7. Re-assemble the smart key. TIP Take note of the assembly direction of the switch plate. TIP Be sure that the seat is properly secured before starting off. Do not store the mechanical key in 3-5 you will need the rear storage compartment or lock it in front storage compart-
ment B. In the event of an emer-
gency, the mechanical key to unlock the seat lock, access the rear storage com-
partment, and operate the vehicle in emergency mode (see page 6-1). EAU61580 Operating range of the smart key system The operating range of the smart key system is about 0.8 m (3.15 in.) from the center of the handlebars. TIP As the smart key system uses weak radio waves, the operating range may be affectedby the sur-
rounding situation. When the battery of the smart key is discharged, the smart key may not work, or its operating range be-
come very small. The smart key may not work when it is muchhigher than the vehicle or close to the ground. If the smart key is in a locked state, 3-6 SMART KEY SYSTEM the smart key system will not work even if you carry the smart key with you. If the smart key system does not work, check the lock/un-
lock state of the smart key. If you continuously operate the start switch, OFF/steering lock switch, or seat open/parking switch when the smart key is out of range or cannot communicate with the vehicle, all switches will be temporarily disabled. The interior of the front trunk and rear trunk may block communica-
tion between the smart key and ve-
hicle. If the rear trunk is locked with the smart key inside, the smart key system may be disabled. The smart key must always be carried by the driver. When leaving the vehicle, make sure you apply the steering and carry the smart key with you. It is recommended that you keep the smart key in a locked state. 1 2 3 4 5 6 7 8 9 10 11 12 SMART KEY SYSTEM Vehicle power ON and steering lock release EAU61630 1. With the smart key in operating range and the vehicle in the un-
locked state, press the start switch for at least one second. 1 1. Start switch 2. Upon authentication of the smart key, the system will sound twice, the key signal light will come on and the steering lock will release automatically. TIP The key signal light will flash if the steering lock cannot automatically release itself. Try moving the han-
dlebars gently to the left or right 1 2 3 4 5 6 7 8 9 10 11 12 and then operate the steering un-
lock function again. If the steering continues to be locked and will not release, the key signal light will flash 16 times and the steering lock release operation will stop midway. Move the handle-
bar gently to the left and right to help release the steering lock and then operate the steering unlock function again. The power of the vehicle will not be turned on if the steering lock is not released completely. ECA15823 NOTICE If the steering lock will not release and the key signal light on the meter is flashing, consult your Yamaha dealer about a possible malfunction in the smart key system. TIP Even when the vehicle is parked in a lo-
cation partitioned by a fence ot the glass window of a shop, if the vehicle is in the operating range of the smart key system, other people who do not have 3-7 a smart key will be able to start the en-
gine, lock the seat, or release the steer-
ing lock. Please keep the smart key system in a locked state in such situa-
tions. (Refer to page 3-3 on how to lock/
unlock the smart key.) 3. The power of the vehicle is turned ON once the steering lock is com-
pletely released. In this case, the key signal light will go off and the display will return to normal. EAU61690 Powering off the vehicle To turn the vehicle off, have the smart key unlocked (on) and within operating range, press the OFF/steering lock switch. The smart key system will sound once to confirm that the vehicle has been successfully turned off. If the smart key is not within operating range or cannot communicate with the vehicle when you press the OFF/steer-
ing lock switch, the power of the vehicle will not be turned off and the smart key system will sound for three seconds
(smart key system indicator light will also flash) to alert you that the power was not successfully turned off. Con-
firm the location and condition of the smart key and try powering off the vehi-
cle again. SMART KEY SYSTEM 1 Please refer to the emergency mode in Page 6-1 on how to turn ON the power without a smart key. 1. OFF/steering lock switch TIP The driver must turn off the power of the vehicle manually. The power of the vehicle will not turn off automatically even if the smart key is moved out of operat-
ing range of the smart key system. The power of the vehicle cannot be turned off when the vehicle is run-
ning. Be sure to stop the vehicle in a safe place when turning off the power. Even if there is no smart key, the power supply can be turned OFF if the power OFF operation is carried out again while the key signal light on the meter is flashing. 3-8 1 2 3 4 5 6 7 8 9 10 11 12 SMART KEY SYSTEM EAU61610 How to steering lock After turning OFF the power of the ve-
hicle, move the vehicle to a safe park-
ing place. Turn the handlebars fully to the left and then press the OFF/steer-
ing lock switch for at least one second. TIP If the steering lock function locks as normal, the system will sounds once. If the steering lock function does not lock correctly, the system will sound for three seconds and the key signal light will flash. Turn the handlebar fully to the left one more time and try locking the steering again. 1 2 3 4 5 6 7 8 9 10 11 12 EWA14742 WARNING Do not operate the steering lock while the vehicle is moving. Seat opening and closing EAU61680 1. With the smart key in operating range, press the seat open/park-
ing switch. TIP The handlebars must be turned manually. The steering lock func-
tion will not turn the handlebars for you. Before leaving the vehicle, make sure youve applied the steering lock and have the smart key. It is recommended that you keep the smart key system in a locked state. 1 1. Seat open/parking switch 2. The seat lock will be released upon authentication of the smart key. EWA17940 WARNING Do not operate the seat open/park-
ing switch while the vehicle is mov-
ing. 3. Lift up the front part of the seat to open the seat. 3-9 To close the seat, lower the seat and push it down to lock it in place. TIP Make sure the seat is properly closed before starting off. The seat can be opened mechani-
cally in the event of an emergency. See emergency mode on page 6-1 for more information. SMART KEY SYSTEM The seat cannot be opened or closed while in parking mode. ECA10062 NOTICE Do not use the hazard lights for an extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge. To exit parking mode Press and hold the seat open/parking switch. Upon authentication of the smart key, parking mode is cancelled and the system will sound once. 1 2 3 4 5 6 7 8 9 10 11 12 EAU61590 Parking mode The steering is locked, and the hazard lights and turn signal lights can be turned on, but all other electrical sys-
tems are off. To use the parking mode 1. Lock the steering. (Refer to Page 3-9) 2. Press and hold the seat open/
parking switch for at least one sec-
ond. 3. When the smart key is authenticat-
ed, the smart key system mode will change to parking mode and sound twice. TIP If you try to enter parking mode without locking the steering first, the smart key system will sound three times and the smart key sys-
tem light will flash. The hazard switch and turn signal indicator lights can be operated in parking mode. The key signal light will come on while in the parking mode. 3-10