H S I L G N E S D N A L R E D E N S I A N A R F L O A P S E S E U G U T R O P I M O U S O N A I L A T I K S N A D A K S N E V S K S R O N H C S T U E D LED UNIT MODEL VS-15NP180R / VS-15NP180R1 VS-15NP180F / VS-15NP180F1 VS-12NP180R / VS-12NP180R1 VS-12NP180RD / VS-12NP180RD1 VS-12NP180RH / VS-12NP180RH1 VS-12NP180F / VS-12NP180F1 VS-12NP180FD / VS-12NP180FD1 VS-12NP180FH / VS-12NP180FH1 Users Manual Warning:
Be sure to follow the directions below. This equipment is not suitable for use in locations where children are likely to be present. This product requires special installation to prevent hazard. Please ask installation specialists for installation. Dont attempt to install the product by yourself. This users manual is important to you. Please read it before using your product. For MITSUBISHI dealer Please read Set-up and Installation Manual before installing the product. For Set-up and Installation Manual, please contact the distributor. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. EN-2 Important safeguards Please read all these instructions regarding your product and retain them for future reference. Follow all warnings and instructions marked on the product. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to. Instructions All operating instructions must be followed. 4. 5. Cleaning the Cabinet Refer screen cleaning to qualified service personnel. Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning. Refer screen cleaning to qualified service personnel. 6. Attachments and equipment Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, electric shock or other personal injury. 7. Water and moisture Do not use this product near water or in contact with water. 8. Accessories Do not place this product on an unstable cart, stand, tripod, bracket or table. Use only with a cart, stand, tripod bracket, or table recommended by the manufacturer or sold with the product. Any mounting of the appliance should follow the manufacturers instructions and should use a mounting accessory recommended by the manufacturer. manufacturers instructions have been adhered to. 10. Power sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your appliance dealer or local power company. 11. Power-cable protection Power-cable should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and points where they exit from the appliance. 12. Objects and liquids Never push objects of any kind through openings of this product as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 13. Servicing Do not attempt to service this product yourself. Refer all servicing to qualified service personnel. 14. Damage requiring service Stop using the product and refer servicing to qualified service personnel under the following conditions:
(a) If the power-cable or plug is damaged.
(b) If liquid has been spilled, or objects have
(c) If the product does not operate fallen into the product. normally after you follow the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and may often require extensive work by a qualified technician to restore the product to its normal operation.
(d) If the product has been exposed to rain or water.
(e) If the product has been dropped or the cabinet has been damaged.
(f) If the product exhibits a distinct change in performance - this indicates a need for service. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the product and to protect it from overheating. Do not block these openings or allow them to be blocked by placing the product on a bed, sofa, rug, or bookcase. Ensure that there is adequate ventilation and that the 15. Replacement parts When replacement parts are required, be sure that the service technician has used replacement parts specified by the manufacturer or parts having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 16. Safety check Upon completion of any service or repair to this product, ask the service technician to perform safety checks determining that the product is in a safe operating condition. EN-3 ENGLISH WARNING:
Stop using the product immediately if there is something wrong with your product. Do not operate if smoke, strange noise or odor comes out of your product. It might cause fire or electric shock. In this case, stop using the product immediately and contact your dealer. Never remove the cover. This product contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owners Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the product. Do not modify this equipment. It can lead to fire or electric shock. Use the optional specified power cable. Electrostatic discharge may harm the surface of the LED units. To prevent such damage, you should discharge static electricity from your body before you contact with the LED units. In addition, during the installation/maintenance work, remove any static charge that your body may have accumulated by touching a metal-grounded object periodically. Do not use the product under the following circumstances, which may cause fire or electric shock. in a dusty or humid place near a heater in a oily, smoky or damp Place in direct sunlight in corrosive gas where the air vents are directly exposed to the air where the product is frequently exposed to vibrations with high temperature, such as the closed car where the temperature is lower than 5C (41F) or where any corrosive gas i.e. SULFIDE-CONTAINING-
from an air conditioner higher than 40C (104F) GAS is produced. Place the product more than 20cm (8in.) from the wall to prevent blocking the intake, exhaust slots and ventilation of this product because not air comes out of it. This product use magnets. If a pacemaker or other medical device is in use, magnetic fields may affect the operation of these devices. For the control terminal, use an Ethernet cable only. For your safety, connect to an Ethernet network which does not exceed the voltage limit of the Ethernet connector. NOTE:
This symbol mark is for EU countries only. This symbol mark is according to the directive 2012/19/EU Article 14 Information for users and Annex IX, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste. If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%) In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators. Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre. Please, help us to conserve the environment we live in!
COMPLIANCE NOTICE OF FCC FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. COMPLIANCE NOTICE OF INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Warning:
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. EN-4 VS-15NP180R / VS-15NP180R1 / VS-15NP180F / VS-15NP180F1 Model VS-15NP180R / VS-15NP180R1 Display system Resolution Screen size Light emitting diode (LED) 320 x 360 pixels 480mm x 540mm H S I L G N E VS-15NP180F / VS-15NP180F1 Input / Output Power consumption Power supply External dimensions
(excluding protrusions) Signal Power Width Height Depth Mitsubishi original image and control link (RJ45 x 2) Mitsubishi original circular connector (Input x 1, Output x 1) Max. Input AC 100-120V: 11.4A, AC 220-240V: 6.0A Max. Output AC 100-120V: 9.5A, AC 220-240V: 5.0A 185 W AC 100-120V 1.9A / AC 220-240V 1.0A 480 mm (18.9 inches) 540 mm (21.3 inches) 99 mm (3.9 inches) Operation temperature and humidity Weight Accessories 5C 40C (41F 104F), 20 % 80 %
12.4 kg (27.3 lbs) 13.0 kg (28.7 lbs) Users Manual, Power cable, Joint parts (4 pcs.), Adjustment bolts and nuts (3pairs) VS-12NP180R / VS-12NP180R1 / VS-12NP180RD / VS-12NP180RD1 / VS-12NP180RH /VS-12NP180RH1 Model VS-12NP180R / VS-15NP180R1 VS-12NP180RD / VS-12NP180RD1 VS-12NP180RH / VS-12NP180RH1 Display system Resolution Screen size 384 x 432 pixels 480mm x 540mm 384 x 216 pixels 480mm x 270mm Light emitting diode (LED) Input / Output Power consumption Power supply External dimensions
(excluding protrusions) Signal Power Width Height Depth
(RJ45 x 2) Mitsubishi original image and control link
(RJ45 x 4)
(RJ45 x 2) Mitsubishi original circular connector (Input x 1, Output x 1) Max. Input AC 100-120V: 11.4A, AC 220-240V: 6.0A Max. Output AC 100-120V: 9.5A, AC 220-240V: 5.0A 185 W AC 100-120V 1.9A / AC 220-240V 1.0A 480 mm (18.9 inches) 540 mm (21.3 inches) 99 mm (3.9 inches) Operation temperature and humidity Weight Accessories 5C 40C (41F 104F), 20 % 80 %
12.6 kg (27.8 lbs) 12.8 kg (28.2 lbs) 10.4 kg (22.9 lbs) Users Manual, Power cable, Joint parts (4 pcs.), Adjustment bolts and nuts (3pairs) VS-12NP180F / VS-12NP180F1 / VS-12NP180FD / VS-12NP180FD1 / VS-12NP180FH /VS-12NP180FH1 Model VS-12NP180F / VS-15NP180F1 VS-12NP180FD / VS-12NP180FD1 VS-12NP180FH / VS-12NP180FH1 Display system Resolution Screen size 384 x 432 pixels 480mm x 540mm 384 x 216 pixels 480mm x 270mm Light emitting diode (LED) Input / Output Power consumption Power supply External dimensions
(excluding protrusions) Signal Power Width Height Depth
(RJ45 x 2) Mitsubishi original image and control link
(RJ45 x 4)
(RJ45 x 2) Mitsubishi original circular connector (Input x 1, Output x 1) Max. Input AC 100-120V: 11.4A, AC 220-240V: 6.0A Max. Output AC 100-120V: 9.5A, AC 220-240V: 5.0A 185 W AC 100-120V 1.9A / AC 220-240V 1.0A 480 mm (18.9 inches) 540 mm (21.3 inches) 99 mm (3.9 inches) Operation temperature and humidity Weight Accessories 5C 40C (41F 104F), 20 % 80 %
13.4 kg (29.5 lbs) 13.6 kg (30.0 lbs) 11.2 kg (24.7 lbs) Users Manual, Power cable, Joint parts (4 pcs.), Adjustment bolts and nuts (3pairs) EN-5 Contact Information North America U.S.A. (Mitsubishi Electric US, Inc. Visual and Imaging Systems) 5900-A Katella Avenue Cypress, CA 90630-5019, U.S.A. Phone :+1 (888) 307-0349 Canada (Mitsubishi Electric Sales Canada Inc.) 4299 14th Avenue Markham, Ontario L3R 0J2, Canada
:+1 (905) 475-7728 Phone Europe France (Mitsubishi Electric Europe B.V. French Branch) 25, Boulevard des Bouvets 92741 Nanterre Cedex. France Phone
:+33 (1) 55.68.55.68 Germany (Mitsubishi Electric Europe B.V. German Branch) Gothaer Strasse 8 40880 Ratingen, Germany
:+49 (2102) 486-9250 Phone Italy (Mitsubishi Electric Europe B.V. Italian Branch) Centro Direzionale Colleoni, Palazzo Sirio-Ingresso 1 Viale Colleoni 7, 20041 Agrate Brianza (Milano), Italy
:+39 (039) 60531 Phone Benelux (Mitsubishi Electric Europe B.V. Benelux Branch) Nijverheidsweg 23A, 3641 RP, Mijdrecht, The Netherlands
: +31 (297) 282461 Phone Russia (Mitsubishi Electric (Russia) LLC) Letnikovskaya street 2, bld.1, 5th Tel., Moscow, 115114, Russia Phone Fax
:+7 (495) 721-20-70
:+7 (495) 721-20-71 Spain (Mitsubishi Electric Europe B.V. Spanish Branch) Carretera de Rubi 76-80 AC-420, 08190 Sant Cugat del Valles, Barcelona, Spain
:+34 (935) 653-131 Phone Scandinavia (Mitsubishi Electric Europe B.V. Scandinavian Branch) Hammarbacken 14, Box 750 S-17127, Sollentuna, Sweden
:+46 (8) 625-1000 Phone UK (Mitsubishi Electric Europe B.V. UK Branch) Travellers Lane, Hateld, Hertfordshire, AL10 8XB, England, United Kingdom
:+44 (1707) 278684 Phone Asia China (Mitsubishi Electric Air-Conditioning &
Visual Information Systems (Shanghai) Ltd.) T3L3, Hongqiao Vanke Center, No.988 Shenchang Road, Shanghai, 201106 China
:+86(21) 2312-3030 Phone Singapore (Mitsubishi Electric Asia Pte. Ltd.) 307, Alexandra Road, #05-01/02 Mitsubishi Electric Building, Singapore 159943
:+65-6473-2308 Phone India (Mitsubishi Electric Asia Pte. Ltd.) 307, Alexandra Road, #05-01/02 Mitsubishi Electric Building, Singapore 159943
:+65-6473-2308 Phone Indonesia (Mitsubishi Electric Asia Pte. Ltd.) 307, Alexandra Road, #05-01/02 Mitsubishi Electric Building, Singapore 159943
:+65-6473-2308 Phone Philippines (Mitsubishi Electric Asia Pte. Ltd.) 307, Alexandra Road, #05-01/02 Mitsubishi Electric Building, Singapore 159943
:+65-6473-2308 Phone Malaysia (Mitsubishi Electric Asia Pte. Ltd.) 307, Alexandra Road, #05-01/02 Mitsubishi Electric Building, Singapore 159943
:+65-6473-2308 Phone Vietnam (Mitsubishi Electric Asia Pte. Ltd.) 307, Alexandra Road, #05-01/02 Mitsubishi Electric Building, Singapore 159943
:+65-6473-2308 Phone Korea (Setsuyo Astec Corporation Seoul Branch) 16F KT Bldg., 28-2 Yeouido-dong, Yeoungdeungpo-gu, Seoul 150-931, Korea
:+82-(0) 2-2657-9841~3
:+82-(0) 2-2657-9900 Phone Fax Taiwan (Mitsubishi Electric Taiwan Co., Ltd) 11th Floor, No. 88 Sec. 6, Chung-Shan N. Road, Taipei, Taiwan, 111 R.O.C
:+886(2) 2832-8255 Phone Oceania Australia (Mitsubishi Electric Australia) 348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
:+612- 9684-7777 Phone 0118907540 0223537817 0368716655 0457501711 0487783336 0527210133 0762529598 0664548676 0756225811 0822852101 SS 0862421901 0878313188 0924838212 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan 6178550 1 871D530A80