FCC ID: 2AXQZWYSAGVDXG-M Wireless LAN & Bluetooth Combo Module

User Manual Since this module is not sold to general end users directly, there is no user manual of module. The following information must be indicated on the host device of this module;

Contains Transmitter Module FCC ID: 2AXQZWYSAGVDXG-M Contains FCC ID: 2AXQZWYSAGVDXG-M This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device. The following statements must be described on the user manual of the host device of this module;

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. or The following statements is not for the requirement to describe on the user manual of the host This device complies with below part 15 of the FCC Rules. The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of The final host product still requires Part 15 Subpart B compliance testing with the modular device of this module;

Part 15 Subpart C Part 15 Subpart E certification. transmitter installed.

Brand Model WYSAGVDXG-M MITSUBISHI ELECTRIC Document No. BNP-C9791-R4-001(ENG)-*

Label specifications and sticking position 1Label specification The label specifications of the wireless module are shown in Figure 1. Figure 1 Label specification 2Sticking position Sticking position of label is shown in Figure 2. Sticking position Figure 2 Sticking position MITSUBISHI ELECTRIC CORPORATION NAGOYA WORKS NC Hardware System Section 1 Numerical Control System Dept. 1-14 YADA-MINAMI 5-CHOME HIGASHI-KU NAGOYA, 461-8670 JAPAN Phone: +81-52-712-3934 Fax: +81-52-723-0427 Page 1 of 1

wee Yida a (aniversay Y. Spuutlallx. Kimemet =

Yuutatsu MITSUBISHI ELECTRIC CORPORATION Tokyo Building, 2-7-3, Marunouchi, Chiyoda-ku, Tokyo 100-8310, Japan, Phone +81-3-3218-2111 hanges for the Better Letter of Authorization Date: March 23, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCCID :2AXQZWYSAGVDXG-M Applicant : Mitsubishi Electric Corporation Nagoya Works SOR uelmuCNmuenuaen Please be advised we authorize Shuichi Ohyama of Consumer Technology Division, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Suse he Kanemoto Mitsubishi Electric Corporation Nagoya Works

MITSUBISHI ELECTRIC |

_, Yuutatsu Kanemoto VSL d ra Canioe SO UY Tokyo Building, 2-7-3, Marunouchi, Chiyoda-ku, Tokyo 100-8310, Japan, Phone +81-3-3218-2111 OT SMM La Declaration Letter of Changing ID March 23, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 We Mitsubishi Electric Corporation Nagoya Works, are requesting a change of ID grant for original FCC ID: RYYWYSAGVDXG and we will be identifying it with FCC ID: 2AXQZWYSAGVDXG-M. SUR eo core Nm eC TENOR Biawm eee UmVon OBB cell memieusuiecemeeelua The module manufacturer is the same. The original test results are applicable and representative of this changed device. Only FCC ID and model number(*) that is included in the scope of changing ID are different. Meanwhile we submit the following documents. The documents on file with Federal Communication Commission from the original certification remain unchanged and continue to be valid except for these documents.

(*) WYSAGVDXG (Chip Antenna model) is the only scope of this certification. Oo miee eA eR-leltoe Cwm NOM TOMA caiCs) oom BU ee olerai External Photo Internal Photo User Manual Label drawing/ location Block Diagram Specification Schematic Diagram lane yh ank you for your attention to this matter nn <<< <<

ou Sincerely Mitsubishi Electric Corporation Nagoya Works

: Declaration about Change in identification of equipment March 17, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Subject Original Application:

FCC ID

: RYYWYSAGVDXG

: TAIYO YUDEN CO., LTD.

: Wireless LAN & Bluetooth Combo Module

: WYSAGVDXG

: April 18, 2019

: 2AXQZWYSAGVDXG-M

: Mitsubishi Electric Corporation Nagoya Works

: Wireless LAN & Bluetooth Combo Module

: WYSAGVDXG-M Grant date Multiple Listing Application:

Applicant Product name Model name FCC ID Applicant Product name Model Name To Whom It May Concern:

We, TAIYO YUDEN CO., LTD., hereby declare at our sole responsibility, that the following product Wireless LAN & Bluetooth Combo Module [FCC ID: RYYWYSAGVDXG] granted on April 18, 2019 is the same device with Wireless LAN & Bluetooth Combo Module [FCC ID: 2AXQZWYSAGVDXG-M]. We submitted several models at original application timing but only model name described above is a scope of the multiple listing application in this time. We accept Mitsubishi Electric Corporation Nagoya Works applies the Multiple Listing Application for Wireless LAN & Bluetooth Combo Module (WYSAGVDXG-M) in accordance with 2.933. The documents on file with FCC from the original certification remain unchanged and continue to be valid. We accept for FCC officials to use documents on file with the Department from the existing certification. This permission is accepted for the only identified equipment and it doesnt mean that we will delegate responsibilities to Mitsubishi Electric Corporation Nagoya Works. Thank you for your attention to this matter. Sincerely yours, Hideki Kato TAIYO YUDEN CO., LTD.