Audio System About Your Audio System The audio system features AM/FM radio and SiriusXM Radio service. It can also play USB flash drives, and iPod, iPhone and Bluetooth devices. You can operate the audio system from the buttons and switches on the panel, the remote controls on the steering wheel, or the icons on the touchscreen interface *. USB Flash Drive 1About Your Audio System SiriusXM Radio is available on a subscription basis only. For more information on SiriusXM Radio, contact a dealer. 2 General Information on the Audio System P. 299 SiriusXM Radio is available in the United States and Canada, except Hawaii, Alaska, and Puerto Rico. SiriusXM is a registered trademark of SiriusXM Radio, Inc. F e a t u r e s Remote Controls iPod iPod, iPhone and iTunes are trademarks of Apple Inc. State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle. Place your phone where you can get good reception. 202
* Not available on all models USB Port(s) In the console compartment Install the iPod USB connector or the USB flash drive to the USB port. Models with color audio system u The USB port (1.0 A) is for playing sound files on a USB flash drive and connecting cellular phone. Models with display audio system u The USB port (1.5 A) is for playing sound files and connecting with Apple CarPlay and Android Auto through cellular phone and charging devices. In the console compartment *
The USB port (1.0 A) is for playing sound files on the USB flash drive and connecting cellular phone.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models uuAudio SystemuUSB Port(s) 1USB Port(s) Do not leave the iPod or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it. We recommend using an extension cable with the USB port. Do not connect the iPod or USB flash drive using a hub. Do not use a device such as a card reader or hard disk drive, as the device or your files may be damaged. We recommend keeping your data backed up before using the device in your vehicle. Displayed messages may vary depending on the device model and software version. If the audio system does not recognize the iPod, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturers instructions provided with the iPod or visit www.apple.com/ipod. USB charge (1.5 A) The USB port can supply up to 1.5 A of power. It does not output 1.5 A unless the device requests. For amperage details, read the operating manual of the device that needs to be charged. Turn the ignition switch to ACCESSORY (q or ON
(w *1 first. Under certain conditions, a device connected to the port may generate noise in the radio you are listening to. F e a t u r e s 203 uuAudio SystemuAudio Remote Controls 1Audio Remote Controls Some mode appears only when an appropriate device or medium is used. Depending on the Bluetooth device you connect, some functions may not be operated. F e a t u r e s Audio Remote Controls Models with information display Allow you to operate the audio system while driving. SOURCE Button Button Button
(+ Button
(- Button SOURCE Button Cycles through the audio modes as follows:
FM AM USB iPod Bluetooth Audio
(+ (- (Volume) Buttons Press (+: To increase the volume. Press (-: To decrease the volume. Buttons When listening to the radio Press Press Press and hold Press and hold
: To select the next preset radio station.
: To select the previous preset radio station.
: To select the next strong station.
: To select the previous strong station. When listening to an iPod, USB flash drive, or Bluetooth Audio Press Press
: To skip to the next song.
: To go back to the beginning of the current or previous song. When listening to an USB flash drive Press and hold Press and hold
: To skip to the next folder.
: To go back to the previous folder. Continued 205 1Audio Remote Controls Some mode appears only when an appropriate device or medium is used. Depending on the Bluetooth device you connect, some functions may not be operated. Press previous command or cancel a command.
(Hang-up/back) button to go back to the Press button to switch display. 2 Switching the Display P. 210 uuAudio SystemuAudio Remote Controls Models with multi-information display Allow you to operate the audio system while driving. The information is shown on the i-MID. ENTER Button
(+ Button Button Button
(- Button F e a t u r e s or Buttons 4 3 to cycles through the audio 3 4 Press mode as follow:
FM AM SiriusXM
* USB iPod Pandora Bluetooth Audio Audio Apps *
* Aha *
When listening to the radio and SeriusXM 1. Press ENTER to switch the display to a
*
preset list you stored in the preset buttons. to select a preset, then press 3 4 or 2. Press ENTER. When listening to an USB flash drive 1. Press ENTER to display the folder list. 2. Press 3. Press ENTER to display a list of tracks in that to select a folder. or 3 4 folder. 4. Press 3 ENTER. or 4 to select a track, then press When listening to an iPod 1. Press ENTER to display the iPod music list. 2. Press 3. Press ENTER to display a list of items in the to select a category. or 3 4 category. 4. Press 3 4 or to select an item, then press ENTER. 206
* Not available on all models uuAudio SystemuAudio Remote Controls u Press ENTER and press 3 or 4 repeatedly until a desired item you want to listen is displayed. When listening to a Pandora 1. Press ENTER to display the station list. 2. Press to select an item, then press 3 4 or
*
ENTER. When listening to a Bluetooth audio 1. Press ENTER to display the track list. 2. Press to select a track, then press or 4 3 ENTER.
(+ (- (Volume) Bar Press (+: To increase the volume. Press (-: To decrease the volume. Models with display audio system Slide up or down also increase or decrease the volume.
* Not available on all models Continued F e a t u r e s 207 Audio System Basic Operation Models with Display Audio To use the audio system function, the ignition switch must be in ACCESSORY (q or ON (w *1. AUDIO HOME VOL MENU BACK
: Select to go to the home screen. 2 Switching the Display P. 228
: Select to display any mode. The available mode includes Sound, View Radio Text, Music Search, and play modes.
: Select to go back to the previous display when it is displayed.
: Select to change the audio/information screen brightness. Select an adjustment. once and select (- or (+ to make u Each time you select
, the mode switches among the daytime mode, nighttime mode and off mode. 1Audio System Basic Operation Audio Menu Items 2 Station List P. 256, 258 2 Music Search List P. 269, 269, 279 2 Scan P. 257, 259, 267, 259, 280 2 Play Mode P. 270, 270, 280
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch. F e a t u r e s 227 uuAudio System Basic OperationuAudio/Information Screen Changing the Home Screen Icon Layout 1. Select 2. Select and hold an icon. u The screen switches to the customization screen. 3. Drag and drop the icon to where you want it to be. 4. Select OK. u The screen will return to the home screen. F e a t u r e s 232 Home Screen To change to a next screen Swipe uuAudio System Basic OperationuAudio/Information Screen 1Home Screen The home screen has 5 pages (fixed). You cannot add any more pages. Selecting home screen quickly from any pages. to go back to the first page of the Selecting or
, or swiping the screen left or right changes to the next screen. Icon Icon Current page position F e a t u r e s Continued 239 uuAudio System Basic OperationuAudio/Information Screen To use apps or widgets
. 1. Select 2. Select 3. Select App List. u The Apps screen appears. 4. Select the app or widget you want to use. Preinstall app list:
Browser: Displays the web browser utilized by smartphone and Wi-Fi connection. Calculator: Displays Calculator. Downloads: Displays the data downloaded from the web browser and so on. Install USB: Installs and updates app stored in the USB flash drive. Search: Displays various retrieval screens. Settings: Displays the Android setting screen. Aha Radio:
AndroidAuto:
AvPlayer:
Calendar: Displays calendar. CarPlay:
Clock: Displays clock. DaSettings:
DealerDiagActivity:
EcoTripComputer:
ETC:
FileManager:
App List Icon F e a t u r e s 240 1To use apps or widgets Select and hold a selected app or widget to add that app's or widget's shortcut on the home screen. Pre-installed apps may not start up normally. If this occurs, you need to reset the system. 2 Defaulting All the Settings P. 329 If you perform Factory Data Reset, it may reset all the settings to their factory default. 2 Defaulting All the Settings P. 329 In case those apps still do not startup normally even after Factory Data Reset, contact your dealer. There is a possibility that a browser is shut down in the situation of the use. In that situation, the screen will return to before the browser startup. You can delete user installed apps by the following procedure. 1. Select 2. Select Settings. 3. Select System. 4. Select the Others tab. 5. Select Detail Information. 6. Select an App that you want to delete. 7. Select Delete. Pre-installed apps cannot be deleted. uuAudio System Basic OperationuAudio/Information Screen Gallery:
Garmin Navigator:
Info:
Phone:
TaskManager:
TelemaSettings:
TelematicsAPP:
WavPlayer:
F e a t u r e s Continued 241 Closing Apps You can close specific apps running in the background on the system. 1. Select and hold 2. Select an app you want to close. 3. Select Clear. u The display will return to the app list. uuAudio System Basic OperationuAudio/Information Screen 1Closing Apps If you leave the apps used open in the background, some apps may stop operating properly next time using them. If this happens close unused apps. To close all apps on the system, select Clear All, then Yes. You cannot close the apps of HondaLink, AhaTM and Garmin *. F e a t u r e s 247
* Not available on all models 1Adjusting the Sound The SVC has four modes: Off, Low, Mid, and High. SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases. You can also adjust the sound the following procedure. 1. Select 2. Select Settings. 3. Select Audio. 4. Select Sound. uuAudio System Basic OperationuAdjusting the Sound Adjusting the Sound
. 1. Select 2. Select Audio. 3. Select 4. Select Sound. Select a tab from the following choices:
BASS, MIDDLE, TREBLE, FADER, BALANCE, SUBW, Speed Volume Compensation
(SVC), DTS Neural Surround F e a t u r e s 248 1Selecting an Audio Source If you startup preinstalled audio apps, displayed on the lower right of the screen. These preinstalled apps cannot be displayed on the source select screen. You can startup those audio apps from is
. When you are using the AhaTM screen and you want to select another source, select AUDIO on the upper left of the screen. The source select screen will appear. Select the source you want. uuAudio System Basic OperationuDisplay Setup Selecting an Audio Source Select the source icon. Source Select Screen Source List Icons Select the current source icon, then select an icon on the source list to switch the audio source. Limitations for Manual Operation Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped. F e a t u r e s 250 Playing AM/FM Radio uuAudio System Basic OperationuPlaying AM/FM Radio
/AUDIO (Power/Audio) Icon Select to turn the audio system on and off. VOL (Volume) Icons Select to adjust the volume.
(Menu) Icon Select to display the menu items.
(Back) Icon Select to go back to the previous display. AUDIO HOME VOL MENU BACK Scan Icon Select to scan each station with a strong signal. Tune Icons Select frequency. to tune the radio or
*1:Some or all of the lists may not be displayed. Multi-Information Display Audio/Information Screen Open/Close Icon*1 Displays/hides the detailed information. Models with HD RadioTM TAG Select to tag the song if it is played on an HD RadioTM station. The iPod/
iPhone should be connected to the audio system to store the tagged song information on your device. F e a t u r e s Seek Icons Select to search up and down the selected band for a station with a strong signal. or Preset Icons Tune the radio frequency for preset memory. Select and hold the preset icon to store that station. Select to display preset 7 onwards. Continued 255 uuAudio System Basic OperationuPlaying AM/FM Radio Preset Memory To store a station:
1. Tune to the selected station. 2. Select and hold the preset number for the station you want to store. You can also store a preset station by the following procedure. 1. Tune to the selected station. 2. Select the open/close icon to display a list. 3. Select the Preset tab. 4. Select and hold the preset number for the station you want to store. F e a t u r e s Station List Lists the strongest stations on the selected band. 1. Select the open/close icon to display a list. 2. Select the Station List tab. 3. Select the station. Manual update Updates your available station list at any time. 1. Select the open/close icon to display a list. 2. Select the Station List tab. 3. Select Refresh. 256 1Playing AM/FM Radio Models with HD RadioTM If the audio system has the memory capacity, the tagged song information can be stored in it. 1Preset Memory The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available. Switching the Audio Mode Press the select SOURCE on the screen. 3 4 or button on the steering wheel or 2 Audio Remote Controls P. 205 You can store 6 AM stations and 12 FM stations into preset memory. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD RadioTM and the HD, HD Radio, and Arc logos are proprietary trademarks of iBiquity Digital Corp. Scan Samples each of the strongest stations on the selected band for 10 seconds. To turn off scan, select Cancel or
. Models with HD RadioTM Tag Song to Device If your iPod/iPhone is connected to the USB port, you can store the TAG information. If the iPod/iPhone is not connected to the audio system, the information is stored in the audio system temporarily, then once the device is connected to the system, data is transferred to the iPod/iPhone. To store the TAG information to the iPod/iPhone or the audio system, select TAG. Models with HD RadioTM Tagged Song List Displays the TAG information saved to the audio system. 1. Select 2. Select Song Tag List. uuAudio System Basic OperationuPlaying AM/FM Radio F e a t u r e s Continued 257 uuAudio System Basic OperationuPlaying AM/FM Radio Models with HD RadioTM HD Subchannel Displays the subchannel list when an HD RadioTM station is selected while listening to an FM station. 1. Select
. 2. Select HD Subchannel. 3. Select the channel number. Radio Data System (RDS) Provides text data information related to your selected RDS-capable FM station. F e a t u r e s To find an RDS station from Station List 1. Select the open/close icon to display a list while listening to an FM station. 2. Select the Station List tab. 3. Select the station. Manual update Updates your available station list at any time. 1. Select the open/close icon to display a list while listening to an FM station. 2. Select the Station List tab. 3. Select Refresh. 258 1Radio Data System (RDS) When you select an RDS-capable FM station, the RDS automatically turns on, and the frequency display changes to the station name. However, when the signals of that station become weak, the display changes from the station name to the frequency. uuAudio System Basic OperationuPlaying AM/FM Radio Radio text Displays the radio text information of the selected RDS station. 1. Select 2. Select View Radio Text. Scan Samples each of the strongest stations on the selected band for 10 seconds. To turn off scan, select Cancel or
. F e a t u r e s 259 uuAudio System Basic OperationuPlaying SiriusXM Radio Playing SiriusXM Radio
/AUDIO (Power/Audio) Icon Press to turn the audio system on and off. Album Art AUDIO HOME VOL MENU BACK VOL (Volume) Icons Select to adjust the volume.
(Menu) Icon Select to display the menu items.
(Back) Icon Select to go back to the previous display. Scan Icon Select to scan each channel. Category Icons Select SiriusXM Radio category. or to display and select a
*1:Some or all of the lists may not be displayed. F e a t u r e s 260 or Skip Icons Select section in the channel. Select and hold to move rapidly within the section. to change Multi-Information Display Channel Icons Select or or next channel. Select and hold to rapidly skip 10 channels at a time. to the previous Audio/Information Screen Station Art Open/Close Icon*1 Displays/hides the detailed information. TAG Select to tag a song played at a SiriusXM Radio channel. The iPod/
iPhone should be connected to the audio system to store the tagged song information on your device. Preset Icons Tune the radio frequency for preset memory. Select and hold the preset icon to store that station. Select to display preset 7 onwards. To Change the Tune Mode 1. Select 2. Select Tune Mode. 3. Select Channel Mode or Category Mode. uuAudio System Basic OperationuPlaying SiriusXM Radio 1Playing SiriusXM Radio In the channel mode, all available channels are selectable. In the category mode, you can select a channel within a category (Jazz, Rock, Classical, etc.). There may be instances when SiriusXM Radio does not broadcast all the data fields (artist name, title). This does not indicate a problem with your audio system. SiriusXM Radio stations load in ascending order, which can take about a minute. Once they have loaded you will be able to scroll up or down to make your selections. Switching the Audio Mode Press the SOURCE button on the steering wheel or select SOURCE on the screen. 2 Audio Remote Controls P. 205 Tune Start:
When you change to a preset channel, a song being played on that channel restarts from the beginning with this function. This can be turned on or off from the Audio settings screen. 2 Customized Features P. 302 F e a t u r e s Continued 261 1Playing SiriusXM Radio You can store 12 SiriusXM channels into the preset memory. uuAudio System Basic OperationuPlaying SiriusXM Radio Preset Memory To store a channel:
1. Tune to the selected channel. 2. Select to hold the preset number for the station you want to store. 3. Select Replace. You can also store a channel by the following procedure. 1. Tune to the selected channel. 2. Select the open/close icon to display a list. 3. Select the Preset tab. 4. Select and hold the preset number for the station you want to store. Multi-channel preset (for music channels only) You can store up to four of your preferred music channels per preset. 1. Tune a station. 2. Select the open/close icon to display a list. 3. Select the Preset tab. 4. Select and hold the preset number you want to add a music channel. u A message appears if there are no available presets. 5. Select Combine. F e a t u r e s 262 uuAudio System Basic OperationuPlaying SiriusXM Radio Listening to Featured Channels Suggested channel listing received from SiriusXM can be displayed and selected. 1. Select the open/close icon to display a channel list. 2. Select the Channel List tab. 3. Select the featured channel list title you want to listen to. 1Listening to Featured Channels Up to three featured channels by SiriusXM can be displayed. Featured channel lists are at the top of the channel list. u The selected channel list of the title is displayed. 4. Select the channel. F e a t u r e s Continued 263 uuAudio System Basic OperationuPlaying SiriusXM Radio Replay Function The system can record up to the last 60 minutes broadcast of your currently tuned channel as well as the last 30 minutes broadcast of preset channels, starting from the moment you turn the vehicle on. If you tuned to preset channel, the system records up to 60 minutes of a broadcast instead of up to 30 minutes. You can rewind and replay the last 30 or 60 minutes of a broadcast. 1. Select 2. Select Playback Position. 3. Move the gauge to the position you want to replay. F e a t u r e s To play or pause on playback mode:
1. Select 2. Select Play/Pause. Returning to real-time broadcast 1. Select 2. Select Play Live Broadcast. 1Replay Function The system starts storing broadcast in memory when the power mode is turned ON. You can go back to the program from that point. You can no longer replay any program once the power mode is turned off as it erases memory. You can check how long the program has been stored in memory from the audio/information screen. After 30 or 60 minutes of recording the system will automatically start deleting the oldest data. Audio/Information Screen
(A)
(B)
(C)
(A): Shows how much time the replayed segment is behind the real-time broadcast
(B): Replayed segment
(C): Length stored in memory 264 uuAudio System Basic OperationuPlaying SiriusXM Radio Live Sports Alert While listening to other channel, you can receive sports alerts such as scores from your favorite teams. 1Live Sports Alert The sports alert function at SiriusXM mode only. To set up a favorite team
. 1. Select 2. Select Settings. 3. Select Audio. 4. Select Sports Flash Setup. 5. Select Favorite Team. 6. Select a team. To set up a alert message 1. Select 2. Select Settings. 3. Select Audio. 4. Select Sports Flash Setup. 5. Select Interrupt. 6. Select On(one time) or On(continue). 1To set up a favorite team Sports alerts cut in only when SiriusXM mode is on. Selecting On(one time) from the customize settings disables the alert feature next time you turn the power mode to ON. 2 Customized Features P. 302 You can also set up a favorite team by the following procedure. 1. Select Audio. 2. Select 3. Select Setting. 4. Select Sports Flash Setup. F e a t u r e s Continued 265 uuAudio System Basic OperationuPlaying SiriusXM Radio
. To set up a alert beep 1. Select 2. Select Settings. 3. Select Audio. 4. Select Sports Flash Setup. 5. Select Interrupt Beep. 6. Select On. Traffic and Weather Information You can receive traffic and weather information. 1. Select 2. Select Settings. 3. Select Audio. 4. Select Traffic & Weather Setup. 5. Select the region. F e a t u r e s u When you do not want to receive the information, select Unset. 1To set up a alert beep You can also set up a alert beep by the following procedure. 1. Select Audio. 2. Select 3. Select Settings. 4. Select Sports Flash Setup. 1Traffic and Weather Information The traffic and weather information function at SiriusXM mode only. You can also set up the traffic and weather information by the following procedure. 1. Select Audio. 2. Select 3. Select Settings. 4. Select Sports Flash Setup. 266 uuAudio System Basic OperationuPlaying SiriusXM Radio Scan Sample each channel on the selected mode for 10 seconds. 1. Select Scan. 2. Select Scan Channels. u You can select the desired channel by songs using Scan Songs in Presets. To turn off scan, select Cancel Scan. 1Scan The Scan Songs in Presets function is based on TuneScanTM technology of SiriusXM. The Featured Channels function is based on Featured FavoritesTM technology of SiriusXM. TuneScanTM and Featured FavoritesTM are registered trademarks of SiriusXM Radio, Inc. Tag Song to Device If your iPhone/iPod is connected to the USB port, you can store the TAG information. If the iPod/iPhone is not connected to the audio system, the information is stored in the audio system temporarily. Once the device is connected to the system, data is transferred to the iPod/iPhone. To store the TAG information to the iPod/iPhone, or the audio system, select TAG. Tagged Song List Displays the TAG information saved to the audio system. 1. Select 2. Select Tagged Song List. F e a t u r e s 267 U.S. models Playing Pandora*
Your audio system allows you to listen to music from the Pandora app on a compatible smartphone. This function is available when the phone is paired and connected to the vehicles Bluetooth HandsFreeLink (HFL) system, or with an iPhone, you can connect using your USB cable to the USB port. 2 Phone Setup P. 336 2 USB Port(s) P. 203 Multi-Information Display Cover Art Audio/Information Screen
/AUDIO (Power/
Audio) Icon Select to turn the audio system on and off. VOL (Volume) Icons Select to adjust the volume.
(Menu) Icon Select to display the menu items.
(Back) Icon Select to go back to the previous display. Like/Dislike Icons Select to evaluate a song. Play/Pause Icon Select to resume or play a song. uuAudio System Basic OperationuPlaying Pandora*
1Playing Pandora*
Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. Pandora is currently available exclusively in the United States. To find out if your phone is compatible with this feature, visit www.handsfreelink.honda.com, or call 1-888-528-7876. To use this service in your vehicle, the Pandora app must first be installed on your phone. Visit www.pandora.com. for more information. Pandora is free, personalized radio that plays music and comedy youll love. Just start with the name of one of your favorite artists, songs, comedians or composers and Pandora will create a custom station that plays similar tracks. Pandora also features hundreds of genre stations ranging from Dubstep to Smooth Jazz to Power Workout. If you cannot operate Pandora through the audio system, it may be streaming through Bluetooth Audio. Make sure Pandora mode on your audio system is selected. F e a t u r e s Station Up/Down Icons Select to change a station. Skip Icon Select to skip a song.
*1:Some or all of the lists may not be displayed.
* Not available on all models Continued 275 uuAudio System Basic OperationuPlaying Pandora*
Pandora Menu You can operate some of the Pandora menu items from your vehicles audio system. The available items are:
Bookmark Station List New Station Sound Setting Operating a menu item 1. Select 2. Select an item. F e a t u r e s 1Pandora Menu Available operating functions vary on software versions. Some functions may not be available on the vehicles audio system. If there is a problem, you may see an error message on the audio/information screen. 2 Pandora* P. 297 Pandora may limit the total number of skips allowed on the service. If you dislike a track after the skip limit has been reached, your feedback will be saved but the current track will continue to play. To change stations, activate the Pandora menu, select Station List, and then select a new station. It also changes stations on the main Pandora screen. 276
* Not available on all models Playing AhaTM AhaTM can be displayed and operated on the audio/information screen when your smartphone is connected to the audio system by Wi-Fi or through Bluetooth with the HondaLink app downloaded to your smartphone. 2 Wi-Fi Connection P. 288 2 HondaLink P. 283 Multi-Information Display Audio/Information Screen
/AUDIO (Power/
Audio) Icon Select to turn the audio system on and off. VOL (Volume) Icons Select to adjust the volume.
(Back) Icon Select to go back to the previous display. uuAudio System Basic OperationuPlaying AhaTM 1Playing AhaTM AhaTM by Harman is a cloud-based service that organizes your favorite web content into live radio stations. You can access podcasts, internet radio, location-based services, and audio updates from social media sites. Available operating functions vary on software versions. Some functions may not be available on the vehicles audio system. The menu items vary depending on the station you selected. You must have a previously set up AhaTM account prior to using the service in your vehicle. Visit www.aharadio.com for more information. F e a t u r e s You want to select another source, select AUDIO on the upper left of the screen. The source select screen will appear. Select the source you want. 277 uuAudio System Basic OperationuPlaying a USB Flash Drive Playing a USB Flash Drive Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA, or AAC*1 format. Connect your USB flash drive to the USB port, then select the USB mode. 2 USB Port(s) P. 203
/AUDIO (Power/Audio) Icon Select to turn the audio system on and off. VOL (Volume) Icons Select to adjust the volume. F e a t u r e s
(Menu) Icon Select to display the menu items.
(Back) Icon Select to go back to the previous display. Folder Icons to skip to the next folder, and Select to the beginning of the previous folder. to skip
*1:Only AAC format files recorded with iTunes are playable on this unit.
*2:Some or all of the lists may not be displayed. 278 Multi-Information Display USB Indicator Appears when a USB flash drive is connected. Audio/Information Screen Open/Close Icon*2 Displays/hides the detailed information. Track Icons Select Select and hold to move rapidly within a track. or to change files. uuAudio System Basic OperationuPlaying a USB Flash Drive 1Playing a USB Flash Drive Use the recommended USB flash drives. 2 General Information on the Audio System P. 299 WMA files protected by digital rights management
(DRM) cannot be played. The audio system displays Unplayable File, then skips to the next file. If there is a problem, you may see an error message on the audio/information screen. 2 iPod/USB Flash Drive P. 296 Select Switch USB Device in the Audio menu screen to switch to another USB device. F e a t u r e s How to Select a File from the Music Search List 1. Select 2. Select Music. and select Music Search. Folder Selection 3. Select a folder. Track Selection 4. Select a track. Continued 279 uuAudio System Basic OperationuPlaying a USB Flash Drive How to Select a Play Mode You can select scan, repeat, and random modes when playing a file. Scan 1. Select 2. Select Scan. 3. Select a play mode. Random/Repeat Select a play mode. 1How to Select a Play Mode Play Mode Menu Items Scan Scan Folders: Provides 10-second sampling of the first file in each of the main folders. Scan Tracks: Provides 10-second sampling of all files in the current folder. Random/Repeat Random in Folder: Plays all files in the current folder in random order. Random All Tracks: Plays all files in random order. Repeat Folder: Repeats all files in the current folder. Repeat Track: Repeats the current file. To turn off a play mode Select the mode you want to turn off. F e a t u r e s 280 uuAudio System Basic OperationuPlaying Bluetooth Audio Playing Bluetooth Audio Your audio system allows you to listen to music from your Bluetooth-compatible phone. This function is available when the phone is paired and connected to the vehicles Bluetooth HandsFreeLink (HFL) system. 2 Phone Setup P. 361 Multi-Information Display
/AUDIO (Power/
Audio) Icon Select to turn the audio system on and off. VOL (Volume) Icons Select to adjust the volume.
(Menu) Icon Select to display the menu items.
(Back) Icon Select to go back to the previous display. Play Icon Pause Icon Audio/Information Screen Bluetooth Indicator Appears when your phone is connected to HFL. Open/Close Icon*1 Displays/hides the detailed information. Track Icons Select to change tracks. or Group Icons Select or change group. to 1Playing Bluetooth Audio Not all Bluetooth-enabled phones with streaming audio capabilities are compatible. To check if your phone is compatible, visit http://www.handsfreelink.com/Honda/. It may be illegal to perform some data device functions while driving. Only one phone can be used with HFL at a time. When there are more than two paired phones in the vehicle, the first paired phone the system finds is automatically connected. The connected phone for Bluetooth Audio can be different. If more than one phone is paired to the HFL system, there may be a delay before the system begins to play. In some cases, the name of the artist, album, or track may not appear correctly. Some functions may not be available on some devices. F e a t u r e s
*1:Depending on the Bluetooth device you connect, some or all of the lists may not be displayed. Continued 281 uuAudio System Basic OperationuPlaying Bluetooth Audio To Play Bluetooth Audio Files 1. Make sure that your phone is paired and connected to the system. 2 Phone Setup P. 361 2. Select the Bluetooth Audio mode. If the phone is not recognized, another HFL-
compatible phone, which is not compatible for Bluetooth Audio, may already be connected. 1. Select 2. Select Music Search. 3. Select a search category (e.g., Albums). 4. Select an item. u The selection begins playing. F e a t u r e s To pause or resume a file Select the play icon or pause icon. Searching for Music 282 1To Play Bluetooth Audio Files To play the audio files, you may need to operate your phone. If so, follow the phone maker's operating instructions. Switching to another mode pauses the music playing from your phone. You can change the connected phone in the Bluetooth settings on the Audio menu screen by the following procedure. 1. Select 2. Select Settings. 1Searching for Music Depending on the Bluetooth device you connect, some or all of the lists may not be displayed. uuAudio System Basic OperationuWi-Fi Connection Wi-Fi Connection You can connect the display audio to the Internet using Wi-Fi and browse websites or use online services on the audio/information screen. If your phone has cell hotspot capabilities, the system can be tethered to the phone. Use the following steps to setup. Wi-Fi mode (setting for the first time)
. 1. Select 2. Select Settings. 3. Select Bluetooth/Wi-Fi. 4. Select the Wi-Fi tab. 5. Select Wi-Fi On/Off Status, then On. 6. Select Wi-Fi Network List. u Make sure your phones Wi-Fi setting is in access point (tethering) mode. u Select the phone you want to connect to the system. u If you do not find the phone you want to connect in the list, select Scan. 7. Select Connect. u Enter a password for your phone, and select OK. u When the connection is successful, the icon is displayed on the list. 8. Select to go back to the home screen. F e a t u r e s 288 1Wi-Fi mode (setting for the first time) You cannot go through the setting procedure while a vehicle is moving. Park in a safe place to setup the Wi-Fi connection. Some cell phone carriers charge for tethering and smartphone data use. Check your phones data subscription package. Check your phone manual to find out if the phone has Wi-Fi connectivity. You can confirm whether Wi-Fi connection is on or off with the Transmission speed and others will not be displayed on this screen. icon on Wi-Fi Network List. uuAudio System Basic OperationuWi-Fi Connection Wi-Fi mode (after the initial setting has been made) Make sure your phone's Wi-Fi setting is in access point (tethering) mode. 1Wi-Fi mode (after the initial setting has been made) iPhone users You may need to go through an initial setup for Wi-
Fi connection again after you boot your phone. F e a t u r e s 289 Phone Setup uu Bluetooth HandsFreeLink
*uHFL Menus 1Phone Setup Your Bluetooth-compatible phone must be paired to the system before you can make and receive hands-
free calls. Phone Pairing Tips:
You cannot pair your phone while the vehicle is moving. Up to six phones can be paired. Your phone's battery may drain faster when it is paired to the system. If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and return to idle. F e a t u r e s To pair a cell phone (when there is no phone paired to the system) 1. Select Phone. 2. Select Yes. 3. Make sure your phone is search or discoverable mode, then select Continue. u HFL automatically searches for a Bluetooth device. 4. Select your phone when it appears on the list. u If your phone does not appear, you can select Refresh to search again. u If your phone still does not appear, select Phone Not Found and search for Bluetooth devices using your phone. From your phone, search for HandsFreeLink. 5. The system gives you a pairing code on the audio/information screen. u Confirm if the pairing code on the screen and your phone match. This may vary by phone. Continued 361 uu Bluetooth HandsFreeLink
*uHFL Menus To change the currently paired phone 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Bluetooth Device List. 3. Select a phone to connect. u HFL disconnects the connected phone and starts searching for another paired phone. 4. Select Connect Phone/Audio, Connect Phone, or Connect Audio. To change the pairing code setting 1. Select 2. Select Settings. 3. Select Bluetooth/Wi-Fi. 4. Select the Bluetooth tab. 5. Select Edit Pairing Code. 6. Select Random or Fixed. 1To change the currently paired phone If no other phones are found or paired when trying to switch to another phone, HFL will inform you that the original phone is connected again. To pair other phones, select Add Bluetooth Device from the Bluetooth device list screen. 1To change the pairing code setting The default pairing code is 0000 until you change the setting. To create your own, select Fixed, and delete the current code, then enter a new one. For a randomly generated pairing code each time you pair a phone, select Random. F e a t u r e s 362 To delete a paired phone 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Bluetooth Device List. 3. Select a phone you want to delete. 4. Select Delete. 5. A confirmation message appears on the screen. Select Yes. uu Bluetooth HandsFreeLink
*uHFL Menus F e a t u r e s Continued 363 uu Bluetooth HandsFreeLink
*uHFL Menus To Set Up a Text Message/E-mail Options To turn on or off the text/e-mail function 1. Go to the Phone settings screen. 2 Phone settings screen P. 356 2. Select the Text/Email tab, then Enable Text/Email. u A pop-up menu appears on the screen. 3. Select On or Off. To turn on or off the text/e-mail notice 1. Go to the Phone settings screen. 2 Phone settings screen P. 356 2. Select the Text/Email tab, then New Message Notification. u A pop-up menu appears on the screen. 3. Select On or Off. 1To Set Up a Text Message/E-mail Options To use the text message/e-mail function, it may be necessary to set up on your phone. 1To turn on or off the text/e-mail notice On: A pop-up notification comes on every time you receive a new message. Off: The message you receive is stored in the system without notification. F e a t u r e s 364 Ring Tone You can change the ring tone setting. 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Ring Tone. 3. Select Fixed or Mobile Phone. uu Bluetooth HandsFreeLink
*uHFL Menus 1Ring Tone Fixed: The fixed ring tone sounds from the speakers. Mobile Phone: The ring tone stored in the connected cell phone sounds from the speakers. F e a t u r e s Continued 365 uu Bluetooth HandsFreeLink
*uHFL Menus Automatic Import of Cellular Phonebook and Call History When Automatic Phone Sync is set to On:
When your phone is paired, the contents of its phonebook and call history are automatically imported to the system. Changing the Automatic Phone Sync setting 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Automatic Phone Sync. 3. Select On or Off. 1Automatic Import of Cellular Phonebook and Call History When you select a name from the list in the cellular phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name. Pref Home Mobile Work Pager Fax Car Other Voice Blank On some phones, it may not be possible to import the category icons to the system. The phonebook is updated after every connection. Call history is updated after every connection or call. F e a t u r e s 366 uu Bluetooth HandsFreeLink
*uHFL Menus 1Speed Dial When a voice tag is stored, press the call the number using the voice tag. Say the voice tag name. button to F e a t u r e s Speed Dial Up to 20 speed dial numbers can be stored per phone. To store a speed dial number:
1. Go to the Phone menu screen. 2 Phone menu screen P. 359 2. Select Speed Dial. 3. Select New Entry. From Import from Call History:
u Select a number from the call history. From Manual Input:
u Input the number manually. From Import from Phonebook:
u Select a number from the connected cell phones imported phonebook. 4. When the speed dial is successfully stored, you are asked to create a voice tag for the number. Select Yes or No. 5. Select Record to store a voice tag for the speed dial entry. u Using the button, follow the prompts to store a voice tag for the speed dial entry. Continued 367 uu Bluetooth HandsFreeLink
*uHFL Menus 1Speed Dial Avoid using duplicate voice tags. Avoid using home as a voice tag. It is easier for the system to recognize a longer name. For example, use John Smith instead of John. To add a voice tag to a stored speed dial number 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Edit Speed Dial. 3. Select an existing speed dial entry. u From the pop-up menu, select Edit. 4. Select Voice Tag. 5. Select Record, or use the u From the pop-up menu, select Record. button and follow the prompts to complete the voice tag. To delete a voice tag 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Edit Speed Dial. 3. Select an existing speed dial entry. u From the pop-up menu, select Edit. 4. Select Voice Tag. u From the pop-up menu, select Clear. 5. A confirmation message appears on the screen. Select Yes. F e a t u r e s 368 To edit a speed dial 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Edit Speed Dial. 3. Select an existing speed dial entry. u From the pop-up menu, select Edit. 4. Select a setting you want. To delete a speed dial 1. Go to the phone settings screen. 2 Phone settings screen P. 356 2. Select Edit Speed Dial. 3. Select an existing speed dial entry. u From the pop-up menu, select Delete. 4. A confirmation message appears on the screen. Select Yes. uu Bluetooth HandsFreeLink
*uHFL Menus F e a t u r e s Continued 369 uu Bluetooth HandsFreeLink
*uHFL Menus Phonebook Phonetic Modification Add phonetic modifications or a new voice tag to the phones contact name so that it is easier for HFL to recognize voice commands. 1Phonebook Phonetic Modification You can store up to 20 phonetic modification items. To add a new voice tag 1. Select 2. Select Settings. 3. Select System. 4. Select the Voice Recog tab. 5. Select Phonebook Phonetic Modification. 6. Select the phone you want to add phonetic modification to. F e a t u r e s 370 uu Bluetooth HandsFreeLink
*uHFL Menus 7. Select New Voice Tag. 8. Select a contact name you want to add to. u The pop-up menu appears on the screen. 9. Select Modify. 10. Using Record or the button, follow the prompts to complete the voice tag. 11. You will receive a confirmation message on the screen, then select OK. F e a t u r e s Continued 371 uu Bluetooth HandsFreeLink
*uHFL Menus 1Phonebook Phonetic Modification You can only modify or delete contact names for the currently connected phone. To modify a voice tag 1. Select 2. Select Settings. 3. Select System. 4. Select the Voice Recog tab. 5. Select Phonebook Phonetic Modification. 6. Select the phone you want to modify phonetic modification. 7. Select a contact name you want to modify. u The pop-up menu appears on the screen. 8. Select Modify. 9. Using Record or the button, follow the prompts to complete the voice tag. 10. You will receive a confirmation message on the screen, then select OK. F e a t u r e s 372
. To delete a modified voice tag 1. Select 2. Select Settings. 3. Select System. 4. Select the Voice Recog tab. 5. Select Phonebook Phonetic Modification. 6. Select the phone you want to delete phonetic modification. 7. Select a contact name you want to delete. u The pop-up menu appears on the screen. 8. Select Delete. u The selected contact name has been selected. 9. Select OK. uu Bluetooth HandsFreeLink
*uHFL Menus F e a t u r e s Continued 373 uu Bluetooth HandsFreeLink
*uHFL Menus
. To delete all modified voice tags 1. Select 2. Select Settings. 3. Select System. 4. Select the Voice Recog tab. 5. Select Phonebook Phonetic Modification. 6. Select the phone you want to delete phonetic modification. u The contact name list appears. 7. Select Delete All. 8. You will receive a confirmation message on the screen, then select Yes. Making a Call You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial. 1Making a Call Any voice-tagged speed dial entry can be dialed by voice from most screens. Press the button and say the voice tag name. Once a call is connected, you can hear the voice of the person you are calling through the audio speakers. F e a t u r e s 374 uu Bluetooth HandsFreeLink
*uHFL Menus F e a t u r e s AAAAAA AAA BBBBBB BBB CCCCCC CCC To make a call using the imported phonebook 1. Go to the Phone menu screen. 2 Phone menu screen P. 359 2. Select Phonebook. 3. Select a name. u You can also search by letter. Select Search. u Use the keyboard on the touch screen for entering name, if multiple numbers exist select a number. 4. Select a number. u Dialing starts automatically. To make a call using a phone number 1. Go to the Phone menu screen. 2 Phone menu screen P. 359 2. Select Dial. 3. Select a number. u Use the keyboard on the touch screen for entering numbers. 4. Select Dial. u Dialing starts automatically. Continued 375 uu Bluetooth HandsFreeLink
*uHFL Menus To make a call using redial 1. Go to the Phone menu screen. 2 Phone menu screen P. 359 2. Select Redial. u Dialing starts automatically. 1To make a call using redial Press and hold the number dialed. button to redial the last To make a call using the Call History Call history is stored by All, Dialed, Received, and Missed. 1. Go to the Phone menu screen. 2 Phone menu screen P. 359 2. Select Call History. 3. Select All, Dialed, Received, or Missed. 4. Select a number. u Dialing starts automatically. To make a call using a Speed Dial entry 1. Go to the Phone menu screen. 2 Phone menu screen P. 359 2. Select Speed Dial. 3. Select a number. u Dialing starts automatically. 1To make a call using the Call History The call history displays the last 20 all, dialed, received, or missed calls.
(Appears only when a phone is connected to the system.) 1To make a call using a Speed Dial entry When a voice tag is stored, press the call the number using the voice tag. button to 2 Speed Dial P. 367 Any voice-tagged speed dial entry can be dialed by voice from any screen. Press the button and follow the prompts. F e a t u r e s 376 uu Bluetooth HandsFreeLink
*uHFL Menus button to put the current call on hold to 1Receiving a Call Call Waiting Press the answer the incoming call. Press the call. Select Ignore to ignore the incoming call if you do not want to answer it. Press the current call. button again to return to the current button if you want to hang up the You can select the icons on the audio/information screen instead of the buttons. and 1Options During a Call Touch Tones: Available on some phones. You can select the icons on the audio/information screen. F e a t u r e s Receiving a Call When there is an incoming call, an audible notification sounds (if activated) and the Incoming call screen appears. Press the Press the button to answer the call. button to decline or end the call. Options During a Call The following options are available during a call. Mute: Mute your voice. Transfer: Transfer a call from the system to your phone. Touch Tones: Send numbers during a call. This is useful when you call a menu-
driven phone system. Mute Icon The available options are shown on the lower half of the screen. Select the option. u The mute icon appears when Mute is selected. Select Mute again to turn it off. Continued 377
Devices that Emit Radio Waves The following products and systems on your vehicle emit radio waves when in operation. Audio System Bluetooth Audio Bluetooth HandsFreeLink Collision Mitigation Braking SystemTM Immobilizer System Remote Transmitter Charging Cable Interactive Remote Control Each of the above complies with the appropriate requirements or the required standards of FCC (Federal Communications Commission) and Industry Canada Standard, described below:
As required by the FCC:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Industry Canada Standard RSS-Gen/210/251/310. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. I n f o r m a t i o n 569 This device complies with part 15 of FCC Rules and Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme la partie 15 des rgles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. licence-exempt Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency
(RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles les radiolectriques (RF) de la FCC lignes directrices d'exposition et dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.