all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
various |
|
User manual | Users Manual | 403.07 KiB | April 05 2016 / June 05 2016 | |||
various |
|
Users Manual | Users Manual | 3.72 MiB | ||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Attestation Statements | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | April 05 2016 / June 05 2016 | ||||||
various | Cover Letter(s) | April 05 2016 / June 05 2016 | ||||||
various | Test Report | April 05 2016 / June 05 2016 | ||||||
various | Test Setup Photos | April 05 2016 / June 05 2016 | ||||||
various | Cover Letter(s) | |||||||
various | External Photos | |||||||
various | Internal Photos | |||||||
various | Cover Letter(s) | |||||||
various | ID Label/Location Info | |||||||
various | RF Exposure Info | |||||||
various | Test Setup Photos | |||||||
various | Cover Letter(s) | |||||||
various | Test Setup Photos | |||||||
various | Cover Letter(s) | |||||||
various | Internal Photos | |||||||
various | Test Setup Photos | |||||||
various | Cover Letter(s) | |||||||
various | ID Label/Location Info | |||||||
various | ID Label/Location Info | |||||||
various | Internal Photos | |||||||
various | Cover Letter(s) | |||||||
various | RF Exposure Info | |||||||
various | Test Setup Photos | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | External Photos | |||||||
various | ID Label/Location Info | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | RF Exposure Info | |||||||
various | Cover Letter(s) | |||||||
various | Parts List/Tune Up Info | |||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | ID Label/Location Info | |||||||
various | ID Label/Location Info | |||||||
various | RF Exposure Info | January 11 2013 | ||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | RF Exposure Info | |||||||
various | Cover Letter(s) | November 07 2013 | ||||||
various | Attestation Statements | November 07 2013 | ||||||
various | ID Label/Location Info | November 07 2013 | ||||||
various | Cover Letter(s) | November 07 2013 | ||||||
various | Cover Letter(s) | November 07 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Antenna specification | Operational Description | July 11 2013 | confidential | ||||
various | Test Setup Photos | November 07 2013 / July 01 2014 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Block diagram | Block Diagram | July 11 2013 | confidential | ||||
various | Test Report | November 07 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Test Report | July 11 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Test Report | July 11 2013 | ||||||
various | Test Report | November 07 2013 | ||||||
various | Test Setup Photos | November 07 2013 / July 01 2014 | ||||||
various | Operational description | Operational Description | July 11 2013 | confidential | ||||
various | Schematics | Schematics | July 11 2013 | confidential |
various | User manual | Users Manual | 403.07 KiB | April 05 2016 / June 05 2016 |
Page 1 of 8 DWM-W095A_User_Manual User Manual MITSUMI Wireless LAN Bluetooth Combo Module MODEL DWM-W095A The purpose of this manual is to explain correct way how to integrate module DWM-W095A to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Content 1. General 2. Hardware Essentials 3. Wireless Utility Guide 4. BT Utility Guide 5. Regulatory Statement 1. General This MITSUMI Wireless LAN Bluetooth Combo Module, model DWM-W095A has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer. For detail information concerning type approval of this module (e.g. where this module is already pre-approved) please contact the authorized local distributor or manufacturer. The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. 2. Hardware Essentials Overall Appearance Page 2 of 8 DWM-W095A_User_Manual Package Outline LGA Module of 155 pins Dimension Width 17.0 mm x Depth 10.5 mm x Height 1.5 (MAX) mm Weight 0.45g Environmental Conditions Operating Temperature: -10C to +75C Operating Humidity: 20% to 85% (None dew) Storage Temperature: -25C to +85C Storage Humidity: 20% to 85% (None dew) Page 3 of 8 DWM-W095A_User_Manual 3. WLAN Utility Guide Wireless Network Connection Setting Step-1: Install WLAN Driver (Broadcom 802.11g Network Adapter). Step-2: Set the Wireless Zero Configuration property.
(Software supply and support will be done by Broadcom according to the licence agreement.) Startup type: Automatic, Service status: Start, and click OK. Step-3: Select the SSID of WLAN Access Point (AP) which you want to create a connection, and click Connect. Then, a connection between the Module DWN-W095A and the WLAN AP is created. Page 4 of 8 DWM-W095A_User_Manual
(Software supply and support will be done by Broadcom according to the licence agreement.) 4. BT Utility Guide Bluetooth Link Setting Step-1: Install the application software for Bluetooth, run the application, and load firmware. Step-2: Set Event Filter. Step-3: Make Write Scan enable. Step-4: Scan the device (Module DWM-W095A) by the Bluetooth product which you want to establish a link, and set PIN code. Step-5: Send PIN Code Request Reply to the Bluetooth product. Then, a link between the Module DWN-W095A and the Bluetooth product is established. Page 5 of 8 DWM-W095A_User_Manual 5. Regulatory Statements
- OEM integrators must ensure that its product is electrically identical to Mitsumis reference designs. Any modifications to Mitsumis reference designs may invalidate regulatory approvals in relation to the product, or may necessitate notifications to the relevant regulatory authorities.
- OEM integrators are responsible for regression testing to accommodate changes to designs, new antennas, and host and submit for C2PC filings. Colocation with other transmitter modules will be addressed through filings for those co-located transmitters when necessary or that colocation of other transmitters will be according to applicable KDB guidelines including those for RF exposure
-The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter
- Appropriate labels must be affixed to the product that complies with applicable regulations in all respects. The regulatory label on the final system must include the statement: Contains FCC ID:
EW4DWMW095A and/or IC: 4250A-DWMW095A.
- A users manual or instruction manual must be included with the product that contains the text as required by applicable law shall be provided to OEM integrators. They may include:
5.1 USAFederal Communications Commission (FCC) FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be collocated or operating in conjunction with any other antenna or transmitter. FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Page of 8 DWM-W095A_User_Manual The final host manual shall include the following regulatory statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be collocated or operating in conjunction with any other antenna or transmitter. 5.2. Canada - Industry Canada (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Lutilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Caution:
Users should also be advised that
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les utilisateurs devraient aussi tre aviss que
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Page of 8 DWM-W095A_User_Manual
(ii) le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e.;
(iii) le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. De plus, les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux
(c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. En vertu de la rglementation de l'industrie du Canada, cet metteur de radio ne peuvent fonctionner en utilisant une antenne d'un type et maximum (ou moins) Gain approuv pour l'metteur par Industrie Canada. pour rduire risque d'interfrence aux autres utilisateurs, le type d'antenne et son gain doivent tre choisis de sorte que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour la russite de communication. Exposure to Radio Frequency Radiation To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Pour se conformer aux exigences en matire d'exposition RF IC, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil et toutes les personnes. Cet appareil ne doit pas tre co-localises ou oprant en conjonction avec une autre antenne ou un autre metteur. 5.3 Taiwan NCC 5.25-5.35 Labeling. MITSUMI Wireless LAN Bluetooth Combo Module DWM-W095A labeled as below. Contains NCC ID: CCXXXXYYYYYZZW Page 8 of 8 DWM-W095A_User_Manual 5.4 Europe-EU Declaration of Conformity and Restrictions Hereby, MITSUMI declares that this MITSUMI Wireless LAN Bluetooth Combo Module MODEL DWM-W095A is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment is marked with the symbol and can be used throughout the European community. This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical specifications:
EN 300 328, Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 893, Broadband Radio Access Networks (BRAN) 5 GHz high performance RLAN Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive EN 301 489-17, Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specific Conditions for Wideband Data and HYPERLAN Equipment. EN 60950-1, Safety of Information Technology Equipment. EN 62311, Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz). Marking by the symbol indicates that usage restrictions apply. Restrictions:
- This product is for indoor use only when using channels 36, 40, 44, or 48 (51505250MHz).
- To ensure compliance with local regulations, be sure to select the country in which the access point in installed. Caution: Exposure to Radio Frequency Radiation. This device must not be co-located or operating in conjunction with any other antenna or transmitter, without further RF Exposure evaluation. Remark:
This module is for a fixed application only. The OEM integrator will need to conduct full EMC testing in accordance with EN301 489-17 in the final use configuration
various | Users Manual | Users Manual | 3.72 MiB |
Users Guide Learn how to use your Fujitsu LIFEBOOK Q5 Tablet PC Guide dutilisation Dcouvrez comment utiliser votre PC Tablette LIFEBOOK Fujitsu Q5 Draft version Users Guide Learn how to use your Fujitsu STYLISTIC Q584 Tablet PC Copyright and Trademark Information Fujitsu America, Inc.has made every effort to ensure the accuracy and completeness of this document. Because ongoing development efforts are made to continually improve the capabilities of our products, however, the data contained herein represents Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. This product data does not constitute a warranty. Specifications are subject to change without knowledge. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; STYLISTIC is a registered trademark of Fujitsu America, Incorporated. Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The SD Logo is registered with the U.S. Patent and Trademark Office and with other trademark offices around the world by SD-3C, LLC. AMD and Radeon are trademarks or registered trademarks of Advanced Micro Devices, Inc. OmniPass is a trademark of Softex, Inc. Skype is a trademark of Skype Limited. Broadcom is a registered trademark of Broadcom Corporation.smartcard Norton Internet Security is a trademark of Symantec Corporation in the United States and other countries. AirPrime is a trademark of Sierra Wireless Inc. Gobi3000 is a trademark of Qualcomm Inc. Adobe and Adobe Reader are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Ralink is a registered trademark of Ralink Technology Corporation. Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG, Inc. Realtek is a trademark of Realtek Semiconductor Corp. Wi-Fi is a trademark of the Wireless Ethernet Compatibility Alliance (WECA). All other products are trademarks or registered trademarks of their respective companies. All other trademarks mentioned herein are the property of their respective owners. Copyright 2012 Fujitsu America, Incorporated. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written consent of Fujitsu America, Incorporated. No part of this publication may be stored or transmitted in any electronic form without the prior consent of Fujitsu America, Incorporated. B5FK-0131-01ENZ0-00 USER GUIDE FOR WIRELESS BROADBAND CONNECTION IF YOU HAVE THE OPTIONAL WIRELESS WAN (WWAN) DEVICE INSTALLED IN YOUR TABLET PC, THE WWAN USERS GUIDE IS LOCATED AT:
http://solutions.us.fujitsu.com/www/content/support/mobile/support_notices PLEASE CLICK 3G MINI-CARD GOBI3000 REGULATORY AND SAFETY INFORMATION TO OPEN THE FULL USER GUIDE CONTAINING WARNINGS AND PRECAUTIONS ASSOCIATED WITH RF SAFETY WHEN USING THE WWAN DEVICE. DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:
Address:
Telephone:
Declares that product:
Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085
(408) 746-6000 Base Model Configuration: STYLISTIC Q584 Tablet PC This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. Complies with Part 15 of the FCC Rules. IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a current of 3.16A (60 W). AC adapter output polarity:
+
When using your tablet PC, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
CAUTION: HOT SURFACE: THE BOTTOM OF THIS COMPUTER CAN BECOME HOT WHEN USED FOR LONG PERIODS OF TIME. WHEN USING THIS DEVICE, TAKE CAUTION TO LIMIT LONG TERM OR CONTINUOUS USE WHILE RESTING IT ON EXPOSED SKIN, SUCH AS THE LAP. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS CONTAINED HEREIN. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. For Authorized Repair Technicians Only SAVE THESE INSTRUCTIONS DANGER OF EXPLOSION IF LITHIUM (CLOCK) BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURERS INSTRUCTION. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE. Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly. Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Corporation
(RBRC)**, a non-profit public service organization dedicated to protecting our environment by recycling old batteries at no cost to you. RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the location nearest you, go to www.RBRC.org or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website (http://EIAE.org/) and search for a convenient disposal location. Remember protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or www.fujitsu.ca/products/notebooks in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu. Contents Chapter 1 About This Guide . 11 Conventions Used in the Guide . 11 Fujitsu Contact Information . 12 Getting to Know Your Tablet PC Overview. 14 Locating the Connectors and Controls. 15 Front Features. 15 Back Features . 17 Left Side Features . 19 Right Side . 20 Status Indicator Panel. 22 Display Panel . 24 Active Digitizer/Touchscreen . 26 Active Digitizer Display. 26 Using the Capacitive Touchscreen . 30 Caring for the Pen. 32 Changing the Pen Battery . 33 Replacing the Pen Tip. 33 Tablet PC Buttons . 35 6 Chapter 2 Chapter 3 Getting Started with Your Tablet PC Power Sources . 37 Connecting the Power Adapters . 37 Starting Your STYLISTIC Tablet PC . 39 Power On . 39 Boot Sequence . 40 Hard Disk Drive Passwords . 40 BIOS Setup Utility . 41 Booting the System. 42 Starting Windows the First Time. 42 Power Management . 44 Power/Suspend/Resume Switch . 44 Sleep Mode . 44 Hibernation (Save-to-Disk) Feature. 45 Windows Power Management . 46 Restarting the System. 46 Powering Off . 46 User-Installable Features Lithium Polymer Battery. 47 Recharging the Batteries . 48 Replacing the Battery . 49 Secure Digital Cards. 52 Installing SD Cards . 52 Removing an SD Card . 53 7 -
Chapter 4 Chapter 5 Chapter 6 Troubleshooting Your Tablet PC Troubleshooting. 54 Identifying the Problem . 54 Specific Problems . 56 Power On Self Test Messages . 62 Restoring Your System Image and Software. 63 Saving and Recovering Your Factory and System Images . 63 Backing Up a System Image . 65 Recovery and Utility tools . 69 Recovering your Factory Image using Recovery and Utility . 71 Downloading Driver Updates . 72 Care and Maintenance Caring for your Tablet PC. 73 Cleaning your Tablet PC . 74 Storing your Tablet PC. 76 Traveling with your Tablet PC . 76 Batteries . 77 Media Care . 78 Secure Digital Cards . 79 System Specifications Specifications . 80 Microprocessor . 80 Chipset. 80 Memory . 80 Video . 81 Audio . 81 Mass Storage Device Options . 81 Communications . 82 Security Features. 82 8 -
Device Ports. 82 Power. 83 Dimensions and Weight . 83 Environmental Requirements. 83 Popular Accessories. 84 Included Software . 84 Learning About Your Software . 84 Regulatory Information . 86 Appendix A: WLAN Users Guide Before Using the Optional Wireless LAN. 91 Wireless LAN Device Covered by this Document . 91 Characteristics of the WLAN Device . 91 Wireless LAN Modes Using this Device. 92 Deactivating/Disconnecting the WLAN Device. 94 Deactivation Using the Wireless On/Off Switch . 95 Disconnection Using the Icon in the Taskbar. 95 Activating the WLAN Device . 95 Configuration of the WLAN Device. 96 Configuring the WLAN Using Windows . 96 Connection to the network . 96 Troubleshooting the WLAN. 97 Troubleshooting . 97 WLAN Specifications . 99 Specifications . 99 Using the Bluetooth Device . 100 What is Bluetooth . 100 Where to Find Information About Bluetooth . 100 9 -
Appendix B: Fingerprint Sensor Device Introducing the Fingerprint Sensor Device . 102 Getting Started . 103 Installing OmniPass . 103 User Enrollment . 106 Using OmniPass . 108 Configuring OmniPass . 113 OmniPass Control Center . 115 Troubleshooting . 117 Index . 119 10 -
Preface About This Guide The STYLISTIC Q584 Tablet PC is a high-performance pen-based computer that has been designed to support MicrosoftWindows 7 and Windows 8 Professional editions. This manual explains how to operate your Tablet PC hardware and built-in system software. The STYLISTIC Q584 Tablet PC is a completely self-contained unit with a 10.1 WXGA LED backlit IPS display with 160 degree vertical and horizontal viewing angles. It has a powerful interface that enables it to support a variety of optional features. Conventions Used in the Guide Pages with additional information about a specific topic are cross-referenced within the text. On screen buttons or menu items appear in bold. Example: Click OK to restart your Tablet PC. THE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF THE SUBJECT MATERIAL. THE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR COMPUTER, OR TO THE INTEGRITY OF YOUR FILES. PLEASE READ ALL CAUTION INFORMATION CAREFULLY. 11 THE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR TABLET PC, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY. Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways:
Toll free: 1-800-8FUJITSU (1-800-838-5487) Website:
U.S.A. - us.fujitsu.com/solutions Canada - www.fujitsu.ca Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Shopping Online You can go directly to the online by going to the website at: www.shopfujitsu.com. Maintaining Latest Configuration To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available to allow you to download the latest drivers, utilities, and applications from the Fujitsu Support site. If you have a Windows 7 operating system, you will need to go to the Support Site (http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS). 12 - About This Guide Limited Warranty Your Tablet PC is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your tablet for the Limited Warranty period and terms and conditions. 13 - About This Guide Chapter 1 Getting to Know Your Tablet PC Overview The STYLISTIC Q584 Tablet PC is a high-performance pen-based computer that has been designed to support Microsoft Windows 7 and Windows 8 Professional editions. This chapter provides an overview of the STYLISTIC Q584 Tablet PC and its many features. Figure 1. STYLISTIC Q584 Tablet PC 14 Locating the Connectors and Controls Features and controls that you use to operate your Tablet PC are outlined below and illustrated in Figures 2 and 3. Details on using these features and controls are provided later in this manual. Display Front Web Camera Speaker Web Camera Access LED Ambient Light Sensor Docking Cradle Connector Windows Button Docking Cradle Guide Pin Speaker Figure 2. STYLISTIC Q584 Tablet PC Features (Bottom, Right View) Front Features Front Web Camera The front-facing HD (1280 x 720 pixel) web camera allows you to take pictures of yourself to send over the internet. Web Cam Access LED The web cam access LED indicates when the web camera is in use. 15 - Locating the Connectors and Controls Ambient Light Sensor The ambient light sensor automatically recognizes lighting conditions and adjusts the display to provide optimum battery life. Display The 10.1 Wide XGA display offers 160 degree vertical and horizontal viewing angles. Speakers The speakers allow you to hear sound from the system. Docking Cradle Guide Pin The docking cradle guide pin provides an alignment point when docking your system in the cradle. Windows Button Pressing the Windows button gives you quick access to the Modern Start screen. Docking Cradle Connector Allows you to connect the optional STYLISTIC Docking Cradle. Display The 10.1 HD display offers 160 degree vertical and horizontal viewing angles. 16 - Locating the Connectors and Controls SmartCard Slot Rear Web Camera Battery Lock Latch SD Card Slot Battery Release Latch Removable Battery Fingerprint Sensor Pen Tether Attachment Point Figure 3. STYLISTIC Q584 Tablet PC Features (Back View) Back Features Battery Lock Latch The battery lock latch is used with the battery release latch to allow removal of the battery. SD Card Slot The Secure Digital (SD) card slot allows you to insert a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices. See Secure Digital Cards on page 52. 17 - Locating the Connectors and Controls Battery Release Latch The battery release latch is used with the battery lock latch to allow removal of the battery. Removable Lithium Polymer Battery Can be removed and replaced with a charged battery. See Lithium Polymer Battery on page 47. Pen Tether Attachment Point The pen tether attachment point is used to connect your pen -- or stylus -- to the system to prevent its loss. Fingerprint Sensor The fingerprint sensor allows you to start your system by swiping your finger over the sensor. See Introducing the Fingerprint Sensor Device on page 102. Rear Web Camera The 5.0 megapixel auto-focus rear web camera allows you to take pictures of objects in front of you for sharing over the internet. Smart Card Slot The dedicated Smart Card slot allows you to insert a Smart Card on which you can store such data as medical information or electronic cash. 18 - Locating the Connectors and Controls Air Vents USB 2.0 Connector DC-In Jack HDMI Connector Headphone Jack Figure 4. STYLISTIC Q584 Tablet PC Features Left Side Left Side Features Air Flow Vents The air flow vents assist in proper cooling of the system. TO PROTECT YOUR TABLET FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO KEEP ALL AIR VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED. DO NOT OPERATE THE TABLET IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION. USB 2.0 port Allows you to connect Universal Serial Bus-compliant devices (compliant with USB Standard Revision 2.0) to the Tablet PC. Four additional USB ports are located on the optional STYLISTIC Docking Cradle. DC input connector Allows you to connect the AC adapter or auto adapter. Line Out/Headphone Jack Allows you to connect a set of stereo headphones. HDMI Connector The HDMI connector is used to connect compatible digital devices with your computer (such as a high-definition television or AV receiver). 19 - Locating the Connectors and Controls Built-in Microphone Volume Up Button USB 2.0 Connector Power/Suspend/Resume Switch Built-in Microphone Power Indicator Charge Indicator Pen Tether Attachment Point Volume Down Button Wireless On/Off Switch Rotation Lock Button Pen Attachment Slot Figure 5. STYLISTIC Q584 Tablet PC Features Right Side Right Side USB 2.0 port Allows you to connect Universal Serial Bus-compliant devices (compliant with USB Standard Revision 2.0) to the Tablet PC. Four additional USB ports are located on the optional STYLISTIC Docking Cradle. Built-in Microphones The built-in microphones allow you to input analog audio. Power/Suspend/Resume Switch Allows you to turn on, off, sleep, resume, hibernate or wake the Tablet PC in order to optimize battery life. See Starting Your STYLISTIC Tablet PC on page 39. Volume Up / Volume Down Buttons The Volume Up and Volume Down buttons allow you to control the volume of the tablet. 20 - Locating the Connectors and Controls Charge and Power Indicators Indicate the operational status of the Tablet PC power and battery charge level. See Status Indicator Panel on page 22. Pen Tether Attachment Point The pen tether attachment point is used to connect your pen -- or stylus -- to the system to prevent its loss. Pen Attachment Slot The pen attachment slot allows you to attach an optional pen holder to secure your pen. Wireless On/Off switch The wireless on/off switch is used to turn the optional WLAN, WWAN, and Bluetooth devices on and off. Switching the device off when not in use will help to extend battery life. Rotation Lock Button The rotation lock button is used to Pause or Resume the auto rotation feature. If the auto rotation feature is resumed, the display rotates automatically when the system is rotated. When the auto rotation feature is paused, the display doesn't rotate automatically when the tablet is rotated. 21 - Locating the Connectors and Controls Status Indicator Panel Icons appear under each of the system status LEDs in the status display indicating the status of system power and battery charge status. The location of icons in the Status display is shown in Figure 6. Table 1 explains how the LEDs associated with the individual icons are displayed, and describes what the variations of that display indicate. (If an icon is not displayed, it indicates that the related system function is off or inactive. Power Indicator Charge/DC-In Indicator Figure 6. Status Display Icons 22 - Status Indicator Panel In the following table, a blinking LED flashes at the rate of once per second; an LED that is blinking, slow flashes at the rate of one second on, five seconds off. Table 1. Status Display Conditions Icon Power Charge/DC In Mode/State LED State Remarks On State Idle Mode Sleep Off State Hibernate On State Idle Mode Sleep Hibernate Off State Blue, continuous Blue, blinking Off The system is powered on and ready for use. The system has suspended and saved active settings to RAM. The system has suspended and saved settings and data to the hard disk drive. Green Orange Green, blinking Orange, blinking Off AC adapter and battery are available and charged battery level is 50-100%. AC adapter and battery are available and charged battery level is less than 50%. Tablet PC is in Suspend mode, AC adapter and battery are available and charged battery level is 50-100%. Tablet PC is in Suspend mode, AC adapter and battery are available and charged battery level is less than 50%. The AC Adapter is not available. 23 - Status Indicator Panel Figure 7. Tablet PC Display Panel Display Panel Your STYLISTIC Q584 Tablet PC contains an LCD display panel that is backlit for easier viewing in bright environments. The slate design of your Tablet PC allows you to easily hold the unit and rotate it 90o, 180o, or 270o in either direction. This display is used as a tablet, much as you would a pad of paper. Adjusting Display Panel Brightness To adjust brightness with the power management utility:
From the Modern Start screen, press [Windows]+[X], then select Control Panel. In View by:, select one of the icon views. Select Display, then click Adjust brightness in the left pane. Under Choose or customize a power plan, select the plan settings you want to use. Drag Screen brightness: bar (at the bottom of the window) to the left or right, depending on your preference. 24 - Display Panel Holding the Tablet PC The STYLISTIC Q584 can be held in any of four orientations, depending upon how you would like to use it. There are primary and secondary landscape orientations and primary and secondary portrait orientations. (The orientation nomenclatures reflect those used in the button utility). When you rotate the system using the Rotation button, the order in which it rotates is illustrated below. Primary Landscape Orientation Secondary Portrait Orientation Secondary Landscape Orientation Primary Portrait Orientation 25 - Display Panel Active Digitizer/Touchscreen Active Digitizer Display The integrated active digitizer allows you to use the included stylus (also called a pen) as a pointing device.
(For detailed information about caring for your stylus, go to Caring for the Pen on page 32.) You can use the stylus to click, double-click, drag items and icons, write text, or to draw like a pen or pencil in applications that support this behavior, such as drawing or painting programs. See the documentation that came with your application for details. Figure 8. Using the Active Digitizer Display DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS. EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR ACTIVE DIGITIZER. TO PURCHASE ADDITIONAL OR REPLACEMENT STYLUSES, VISIT THE FUJITSU ACCESSORIES WEBSITE AT: WWW.SHOPFUJITSU.COM. 26 - Active Digitizer/Touchscreen Clicking on Active Digitizer Display To left-click, touch the object you wish to select and then lift the stylus tip immediately. Figure 9. Clicking on the Active Digitizer Display Figure 10. Right-clicking Active Digitizer Right-Clicking on Active Digitizer Right-click can be accomplished by holding the front toggle button down while tapping on the screen. To change the settings for the right-click feature, go to Modern Start screen->[Windows]+[X]-> Control Panel -> Pen and Touch. In the Pen Options tab, select Press and Hold then click the
[Settings] button. 27 - Active Digitizer/Touchscreen Double-Clicking To double-click, touch the item twice, and then immediately remove the stylus tip. Figure 11. Double-clicking the Display Dragging Dragging means moving an item with the stylus by touching the screen, moving and then lifting the stylus. To drag, touch the Active Digitizer Display with your stylus on the item you wish to move. While continuing to touch the screen with the stylus, drag the item to its new location by moving the stylus across the screen, and then lifting the stylus to release it. Figure 12. Dragging on the Display 28 - Active Digitizer/Touchscreen Calibrating the Display In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility before you use the system for the first time, or after you change the display resolution. To run the calibration utility:
1 Go to Modern Start screen -> [Windows]+[X]-> Control Panel. 2 Double-click the Tablet PC Settings icon and select the Display tab 3 Click the [Calibrate] button, then select whether you want to calibrate pen input or touch input. 4 Adjust the display of your Tablet PC to a comfortable angle and find the (+) symbol in the upper-left corner of the display. DO NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR TOUCH PANEL. 5 Using the stylus or your finger (depending upon which type of input you are calibrating), firmly touch the screen directly on the (+) symbol. Lift the stylus from the screen and the target will move to a different location on the screen. 6 Repeat step 5 until you have selected all of the (+) symbols. 7 Once you have selected all the symbols, press the [OK] button. 8 Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not satisfied with the screens calibration, press the [Calibrate] button to begin again. 29 - Active Digitizer/Touchscreen Using the Capacitive Touchscreen Certain configurations of this Tablet PC have an optional dual digitizer that allows you to use either the stylus or your finger(s) as a pointing device. This type of display also allows you to use gestures to perform such actions as scroll, zoom, and rotate. GESTURE SUPPORT IS DETERMINED BY THE APPLICATION IN USE. WHEN ONE FINGER IS USED ON THE TOUCHSCREEN, IT BEHAVES IN THE SAME MANNER AS A STYLUS. THE STYLUS TAKES PRECEDENCE OVER FINGER TOUCH. IF THE STYLUS IS WITHIN ACTIVE RANGE OF THE SCREEN, FINGER TOUCH WILL BE DISABLED. Right-clicking the touchscreen To perform a right-click action using two fingers, press the first finger at the location you want to perform a right-click, then quickly tap and release the second finger on the screen. Gesture Mode To initiate gesture mode, two fingers must touch the screen within 200 ms of each other. If the second finger touches the screen after 200 ms has elapsed, the second finger is ignored. If more than two fingers touch the screen in that time, Advanced Gesture Mode is activated instead. When Gesture Mode is activated, no cursor movement is sent to the system. When both fingers are removed, Gesture mode ends. When a third finger is added, gesture mode ends and Advanced gesture mode is activated. Note that if a gesture cant be recognized, no action is taken. In that case, remove both fingers from the screen and try again. Scrolling Gesture To scroll through long documents or on a web page, place both fingers on the screen (one finger quickly followed by the second). If at least one finger has moved at least 3 mm, a scroll is considered. If both fingers are moving in the same direction and parallel (given a tolerance of 5 mm), Scroll Mode is activated. If one finger is stationary, it is not considered a scroll. If either finger is lifted, Scroll Mode is canceled. Zoom Gesture The zoom gesture is especially helpful when viewing pictures. To zoom in, place two fingers on the item you want to enlarge (one finger quickly followed by the second), then spread them away from each other. 30 - Active Digitizer/Touchscreen If at least one finger has moved at least 10 mm, a zoom event is considered. If the distance between the fingers has changed by at least 10 mm, and both fingers have stayed on approximately the same line, Zoom Mode is entered. If either finger strays more than 10 mm from the "zoom line" created when the fingers first made contact, the zoom is canceled. To zoom out, place two fingers on the item you want to reduce (one finger quickly followed by the second), then move them towards each other. Rotate Gesture To change the orientation of an object on the screen, place two fingers on the image you want to rotate (one finger quickly followed by the second), then move them in opposite directions (as if you were turning a knob). The direction the item turns is dependant upon the direction you move your fingers. If at least one finger moves at least 12 mm, a rotate is considered. If one finger is stationary (moving less than 5 mm in any direction), and the other is moving, a rotate is considered. If the fingers begin moving in the same direction, the rotation is canceled. If the distance between the fingers changes by more than 10 mm, the rotation is canceled. 31 - Active Digitizer/Touchscreen Caring for the Pen ONLY USE THE PEN PROVIDED WITH YOUR TABLET PC. DO NOT USE SUBSTITUTE PEN TIPS THAT WERE NOT SPECIALLY DESIGNED FOR YOUR TABLET PC. REPLACE THE STYLUS TIP IF IT IS WORN. THE WARRANTY DOES NOT COVER A SCRATCHED SCREEN. WHILE WRITING, DO NOT TO SCRATCH THE SURFACE OF THE DISPLAY (E.G., WITH A WRISTWATCH OR BRACELET). THE PEN OF YOUR TABLET PC IS AN ELECTRONIC INSTRUMENT WHICH CAN BE DAMAGED IF USED INCORRECTLY. HANDLE THE PEN WITH CARE. THE FOLLOWING LIST CONTAINS GUIDELINES FOR PROPER PEN HANDLING:
DO NOT GESTURE WITH THE PEN OR USE IT AS A POINTER. NEVER USE THE PEN ON ANY OTHER SURFACE THAN THE SCREEN OF YOUR TABLET PC. DO NOT TRY TO TURN THE THUMB GRIP ON THE PEN. NEVER STORE THE PEN WITH THE TIP BEARING THE WEIGHT OF THE PEN. IF THE PEN IS STORED WITH THE TIP POINTING DOWN, THIS MAY HAVE AN ADVERSE EFFECT ON THE PEN MECHANISM (PARTICULARLY UNDER HIGH TEMPERATURES). IN THIS CASE THE PEN TIP MAY REACT AS THOUGH IT IS CONSTANTLY BEING PRESSED DOWN. THE PEN CAN BE INFLUENCED BY ELECTROMAGNETIC FIELDS (CURSOR QUIVERS OR JUMPS). THERE MAY BE A FEW AREAS ON THE SCREEN WHERE THE CURSOR QUIVERS SLIGHTLY IN SPITE OF PRESSING THE PEN DOWN FIRMLY. Changing the Pen Settings There are a few changes you can make to your pen settings in order to make it more suitable to your needs (such as changing the pressure sensitivity). To do so, go to Modern Start screen->[Windows]+[X] > Control Panel and select one of the icon views from the View by: dropdown. Click on the Pen and Touch icon to open the window from which you can change a variety of pen settings. 32 - Active Digitizer/Touchscreen Changing the Pen Battery DO NOT REMOVE THE TIP OF THE PEN TO REPLACE THE BATTERY;
REMOVE ONLY THE CAP ON THE TOP OF THE PEN. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES IN ACCORDANCE WITH LOCAL INSTRUCTIONS. The pen contains a AAAA-battery. Before proceeding, be sure to have a new battery available. 1 Remove the rear Pen Cap (Figure 13). 2 Remove the battery from the pen barrel. 3 Insert the new battery into the pen barrel in the same orientation as the one that was removed. 4 Close the rear Pen Cap. Replacing the Pen Tip With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen. A damaged or worn tip may not move freely, causing unpredictable results when using the pen. If a problem like this should occur, you should replace the pen tip. 1 Using the pen tip removal tool that was included with your system, pinch the pen tip and pull it from the barrel. 2 Using one of the new tips that were supplied with your pen, insert the pointed end of the tip into the barrel and push it in firmly until it is in place 33 - Active Digitizer/Touchscreen Pen Cap Pen Barrel AAAA-battery Figure 13. Replacing the Battery Pen Tip Pen Tip Removal Tool Figure 14. Replacing the Pen Tip Installing a Pen Tether To prevent dropping or losing your pen, you should attach it to your system using the pen tether that is included with the system. To attach the pen tether to your Tablet PC, perform the following steps:
1 Attach the end of the pen tether with the smaller loop to your pen. To do so, push the end of the tether under the slot on the top of the pen, then thread the opposite end of the tether through the loop. 2 Attach the end of the pen tether with the larger loop to the attachment point on the right side of your tablet. To do so, insert the end of the pen tether through the attachment point, then feed the pen through the large loop in the tether. Figure 15. Installing a Pen Tether 34 - Active Digitizer/Touchscreen Tablet PC Buttons The three Tablet buttons are located on the right-hand side of a horizontally-oriented system. The Windows button is located at the bottom center of the display. Windows Button Volume Down Button Volume Up Button Rotation Lock Button Figure 16. Application buttons Button Name Primary Function (Press) Press at Splash Screen*
In BIOS Setup Utility Description Volume Down Button Volume Down Opens BIOS setup Volume Up Button Volume Up None Acts as Down key while in BIOS Setup Pressing the Volume Down button decreases the volume. While the system is starting up, it opens the BIOS Setup utility, and while the BIOS is open, it can be used to move the cursor down. Acts as Up key while in BIOS Setup Pressing the Volume Up button increases the volume. When the BIOS is open, it can be used to move the cursor up. 35 - Tablet PC Buttons Button Name Primary Function (Press) Press at Splash Screen*
In BIOS Setup Utility Description Rotation Lock Button Enables/disable Auto Rotation feature Opens the Boot menu None Windows Button Open Modern Start screen/Ctl+Alt+Del when pressed with Power button None None Pressing and holding the button enables and disables the Auto Rotate function. It also opens the Boot menu if pressed while the system is starting up. In post-logon, the Windows button can be used to perform two functions. When pressed alone, it opens up the Modern Start screen. When pressed at the same time as the power button, it acts the same as if pressing [Ctl] + [Alt] + [Del].
* Press at Splash Screen refers to the action that occurs when you press the button when the Fujitsu logo appears when you first start up the system. 36 - Tablet PC Buttons Chapter 2 Getting Started with Your Tablet PC Power Sources Your Fujitsu STYLISTIC Tablet PC has three possible power sources: a primary Lithium Polymer battery, an AC adapter or an optional Auto/Airline adapter. Connecting the Power Adapters The AC adapter or optional Auto/Airline adapter provides power for operating your Tablet PC and charging the batteries. Connecting the AC Adapter 1 Plug the DC output cable into the DC power jack of your STYLISTIC Tablet PC. 2 Plug the AC adapter into an AC electrical outlet. Connecting the Optional Auto/Airline Adapter 1 Plug the DC output cable into the DC power jack on your Tablet PC. 2 Plug the Auto/Airline adapter into the cigarette lighter of an automobile, or, 3 Plug the Auto/Airline adapter into the DC power jack on an airplane seat. 37 AC Adapter DC Power Jack Figure 17. Connecting the AC Adapter Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power 1 Be sure that you have at least one charged battery installed. 2 Remove the AC adapter or the Auto/Airline adapter. THE LITHIUM POLYMER BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO CONNECT EITHER THE AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR TABLET PC. 38 - Power Sources Starting Your STYLISTIC Tablet PC Power On Power/Suspend/Resume Switch The Power/Suspend/Resume switch is used to turn on your STYLISTIC Tablet PC from its off state. Once you have connected your AC adapter or charged the internal Lithium Polymer battery, you can power on your Tablet PC. WHEN YOU TURN ON YOUR STYLISTIC TABLET PC BE SURE YOU HAVE A POWER SOURCE. THIS MEANS THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE ADAPTER IS CONNECTED AND HAS POWER. To turn on your STYLISTIC Tablet PC from its off state, slide the Power/Suspend/Resume switch, located on the bottom edge of the right side (when the system is held horizontally). When you are done working you can either leave your Tablet PC in Suspend mode or you can turn it off. See Sleep Mode on page 44 and Powering Off on page 46. Figure 18. Power/Suspend/Resume Switch 39 - Starting Your STYLISTIC Tablet PC When you power on your STYLISTIC, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your STYLISTIC Tablet PC will emit an audio warning and/or an error message will be displayed. See Power On Self Test Messages on page 62. Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the POST, your Tablet PC will load your operating system. NEVER TURN OFF YOUR STYLISTIC TABLET PC DURING THE POWER ON SELF TEST (POST) OR IT WILL CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR STYLISTIC TABLET PC ON THE NEXT TIME. See Power On Self Test Messages on page 62. Boot Sequence The procedure for starting-up your Tablet PC is termed the Bootup sequence and involves your Tablet PCs BIOS. When your STYLISTIC Tablet PC is first turned on, the main system memory is empty, and it needs to find instructions to start up your Tablet PC. This information is in the BIOS program. Each time you power up or restart your Tablet PC, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your Tablet PC is performing a standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating systems opening screen. The boot sequence is executed when:
You turn on the power to your STYLISTIC Tablet PC. You restart your Tablet PC from the Windows Shut Down dialog box. The software initiates a system restart. Example: When you install a new application. Hard Disk Drive Passwords To provide additional security for your data, you can assign passwords to your hard disk drive(s). This feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about accessing the utility. 40 - Starting Your STYLISTIC Tablet PC REMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND MASTER HARD DISK PASSWORDS, FUJITSU WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE. BIOS Setup Utility The BIOS Setup Utility is a program that sets up the operating environment for your STYLISTIC Tablet PC. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your Tablet PC. The BIOS Setup Utility configures:
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the setup utility, do the following:
1 Turn on or restart your STYLISTIC Tablet PC. 2 To enter the BIOS Setup Utility, either press the Rotation button (or press the [F2] key if you have an external keyboard) when the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3 Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings. BIOS Guide A guide to your Tablet PCs BIOS is available online. Please visit our service and support website at http://www.computers.us.fujitsu.com/support, then select Users Guides under Online Support. Select your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide. 41 - Starting Your STYLISTIC Tablet PC Booting the System We strongly recommend that you not attach any external devices until you have gone through the initial power on sequence. When you turn on your Tablet PC for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Starting Windows the First Time After you boot up the system the first time and follow the instructions on the screen, you will eventually come to the Sign-In screen which prompts you for your user name. After sign-in, it takes less then a minute for the computer to boot to Windows and during that time a progress bar and interactive messages are displayed on the screen. During the course of the first start up, you will need to read and accept the End User License Agreements (EULAs) for Microsoft and Fujitsu. YOU CANNOT USE YOUR NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENT. IF YOU STOP THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME PROCESS, EVEN IF YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN. Following first boot, you will arrive at the Modern start screen. Some useful shortcuts for your reference: Press the Windows + D key to go to traditional Windows desktop. Press Windows + M key to load the traditional Windows desktop and minimize all applications. Installing Bonus Apps After you have started your system the first time, you will see a Bonus Apps icon on your desktop. Click on the icon to see which additional applications are available for you to install. Alternatively, you can access Bonus Apps by opening the Charms panel from Modern Start screen and searching for "Bonus Apps". Applications that are already installed appear in grey; those that are available for installation appear in blue. Select the applications you wish to install by selecting the checkbox adjacent to your selection, or click [Select All] if you would like to install all available applications. Once you have made your selections, click [Install]. 42 - Starting Your STYLISTIC Tablet PC Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot. There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Registering your LIFEBOOK with Fujitsu You can register your notebook by going to our website at: http://www.us.fujitsu.com/computers. You will need to be set up with an Internet Service Provider (ISP) to register online. 43 - Starting Your STYLISTIC Tablet PC Power Management Your Fujitsu STYLISTIC Tablet PC has many options and features for conserving battery power. Some of these features are automatic and need no user intervention. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your Tablet PC may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. Besides the options available for conserving battery power, there are also some things that you can do to prevent your battery from running down as quickly. For example, you can create an appropriate power saving profile, put your Tablet PC into Sleep mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings. Power/Suspend/Resume Switch When your Tablet PC is active, the Power/Suspend/Resume switch can be used to manually put the Tablet PC into Sleep mode. Push the Power/Suspend/Resume switch when the Tablet PC is active, but not actively accessing anything, and immediately release the button. If your Tablet PC is suspended, pushing the Power/Suspend/Resume switch returns it to active operation. You can tell whether the system is Suspended by looking at the Power indicator. If the indicator is visible and not flashing, your Tablet PC is fully operational. If the indicator is visible and flashing, the Tablet PC is in Sleep mode. If the indicator is not visible, the power is off or your Tablet PC is in Hibernation mode. Sleep Mode Sleep mode in Windows saves the contents of your system memory during periods of inactivity by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal components except those necessary to maintain system memory and for restarting. Your Tablet PC can be put in sleep mode by:
Pressing the Power/Suspend/Resume switch when your system is turned on. Selecting Sleep after clicking Windows + C -> Settings-> Power button then clicking the small arrow at the bottom right of the window. Timing out from lack of activity. 44 - Power Management Allowing the battery to reach the Dead Battery Warning condition. Your Tablet PCs system memory typically stores the file on which you are working, open application information, and any other data required to support operations in progress. When you resume operation from Sleep mode, your Tablet PC will return to the point where it left off. You must use the Power/Suspend/Resume switch to resume operation, and there must be an adequate power source available, or your Tablet PC will not resume. MODE, THOUGH NOT AS QUICKLY AS WHEN FULLY OPERATIONAL. IF RUNNING YOUR TABLET PC ON BATTERY POWER, BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE WHILE YOUR TABLET PC IS IN SLEEP DISABLING THE POWER/SUSPEND/RESUME SWITCH PREVENTS IT FROM BEING USED TO PUT THE TABLET PC INTO SLEEP OR HIBERNATION MODE. IF YOUR TABLET PC IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE SLEEP OR HIBERNATION MODE, CHANGES TO OPEN FILES ARE NOT LOST. THE FILES ARE LEFT OPEN AND MEMORY IS KEPT ACTIVE DURING SLEEP MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL HARD DRIVE DURING HIBERNATION MODE. THE BUTTON RESUME FUNCTION CANNOT BE DISABLED. THE MAIN ADVANTAGE OF USING HIBERNATION IS THAT POWER IS NOT REQUIRED TO MAINTAIN YOUR DATA. THIS IS PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR TABLET PC IN A SUSPENDED STATE FOR A PROLONGED PERIOD OF TIME. THE DRAWBACK OF USING HIBERNATION MODE IS THAT IT LENGTHENS THE POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES. Hibernation (Save-to-Disk) Feature The Hibernation feature saves the contents of your notebooks system memory to the hard drive as a part of the Power/Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature The default settings are not enabled. To enable or disable the Hibernation feature, follow these steps:
1 From the Modern Start screen, press [Windows]+[X]. Select Control Panel from the menu, then select Power Options. 2 Select Choose what the power button does or Choose what closing the lid does, then make your selection (Do Nothing, Sleep, Hibernate, or Shut Down). 45 - Power Management Windows Power Management The Power Options icon in the Control Panel allows you to configure some of the power management settings. For example, you can use Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery or one of the adapters. Restarting the System If your system is on and you need to restart it, be sure that you use the following procedure. 1 From the Modern Start screen, open Charms ([Windows]+C) or mouse over [-] in the bottom right corner of the screen). Click [Settings]->[Power]. 2 Select Restart from the list. TURNING OFF YOUR LIFEBOOK NOTEBOOK WITHOUT EXITING WINDOWS OR TURNING ON YOUR NOTEBOOK WITHIN 10 SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN YOU START THE NEXT TIME. Powering Off Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shutdown procedure. BE SURE TO CLOSE ALL FILES AND EXIT ALL APPLICATIONS PRIOR TO TURNING OFF THE POWER. IF FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED, AND MAY CAUSE DISK ERRORS. Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
From the Modern Start screen, open Charms ([Windows]+C) or mouse over [-] in the bottom right corner of the screen), click [Settings]->[Power]. Select Shut down from the list. 46 - Power Management Chapter 3 User-Installable Features Lithium Polymer Battery Your STYLISTIC Tablet PC has a Lithium Polymer battery that provides power for operating your Tablet PC when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards. The Lithium Polymer battery operating time may become shorter if it is used under the following conditions:
When used at temperatures that exceed a low of 5C or a high of 35C (41 to 95 F). Extreme temperatures not only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its operating temperature range. When using a high current device such as an external optical drive or the hard drive, using the AC adapter will conserve your battery life. DO NOT LEAVE A FAULTY BATTERY IN YOUR TABLET PC. IT MAY DAMAGE YOUR AC ADAPTER, OPTIONAL AUTO/AIRLINE ADAPTER, OR YOUR TABLET PC ITSELF. IT MAY ALSO PREVENT OPERATION OF YOUR TABLET PC BY DRAINING ALL AVAILABLE CURRENT INTO THE BAD BATTERY. 47 ACTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE IT WITH A NEW ONE. UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING THEM IN THE TRASH. PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES PROPERLY. CHECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT YOUR SUPPORT REPRESENTATIVE AT 1-800-
8FUJITSU (1-800-838-5487) Recharging the Batteries If you want to know the condition of the primary Lithium Polymer battery, check the Battery Level indicator located on the Status Indicator panel. The indicator changes as the battery level changes. The Lithium Polymer battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge the battery make sure the battery that needs to be charged is installed in your STYLISTIC Tablet PC and connect the AC or Auto/Airline adapter. MAKE SURE THAT THE PERCENTAGE CHARGE IS INDICATED BY THE BATTERY CHARGING INDICATOR ON THE STATUS INDICATOR PANEL. There is no memory effect on the Lithium Polymer battery therefore you do not need to discharge the battery completely before recharging. The charge times will be significantly longer if your Tablet PC is in use while the battery is charging. If you want to charge the battery more quickly, put your Tablet PC into Sleep mode, or turn it off while the adapter is charging the battery. (See Power Management on page 44 for more information on Sleep mode and shutdown procedure) USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT CHARGING COMPLETELY. 48 - Lithium Polymer Battery Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your Tablet PC will go into Sleep mode. There is no guarantee that your data will be saved once the Tablet PC reaches this point. ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT YOUR TABLET PC INTO SLEEP MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU SHOULD PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS POSSIBLE. WHEN YOU ARE IN SLEEP MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU REMOVE ALL POWER SOURCES WHILE YOUR STYLISTIC TABLET PC IS IN SLEEP MODE, ANY DATA THAT HAS NOT BEEN SAVED TO THE HARD DRIVE WILL BE LOST. Dead Battery Suspend mode shows on the Status indicator just like the normal Sleep mode. Once your Tablet PC goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter, or a charged battery. Once you have provided power, you will need to press the Power/Suspend/Resume switch to resume operation. In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the data that was not stored. Once you provide power, you can continue to use your Tablet PC while an adapter is charging the battery. Shorted Batteries The Status Indicator panel indicator associated with the Battery Level indicator displays the operating level available in that battery. If this display shows a flashing red LED, it means the battery is damaged and must be replaced so it does not damage other parts of your STYLISTIC Tablet PC. Replacing the Battery With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
49 - Lithium Polymer Battery Cold-swapping Batteries To cold-swap batteries in your battery bay, follow these easy steps:
1 Have a charged battery ready to install. 2 Perform one of the following two steps:
Click the Fujitsu Battery Swap Utility icon on the desktop. Follow the instructions that appear to put the system into Hibernate mode. Using this procedure saves your data and the system powers down. It is then safe to swap the batteries. Save your data, then power down the system. It is then safe to swap the batteries. 3 Note that the battery latch on the left is spring loaded, while the latch on the right is not. Unlock the battery by first pushing the right latch backwards, then pushing and holding the left latch (Figure 19). While holding the left latch, lift the battery out at the lift point (Figure 20). 4 To install a battery, first verify that the right latch is pushed back. While pushing the left latch back and holding it, insert a new battery into the bay. Lock the battery in place by sliding the right latch forward. 5 Plug in the AC adapter and turn the power on. Lift Point Figure 19. Unlocking the Battery Figure 20. Removing the Battery 50 - Lithium Polymer Battery Hot-swapping Batteries To hot-swap batteries in your battery bay follow these easy steps:
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES. 1 Plug an AC Adapter into the system and connect it to a power outlet. 2 Follow steps 3 through 5 in Cold Swapping Batteries. IF THE LITHIUM POLYMER BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR TABLET PC OR CHARGE YOUR BATTERY. 51 - Lithium Polymer Battery Secure Digital Cards Your STYLISTIC Tablet PC supports Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they dont need a power source to retain data. Note that SD and SDHC Cards are supported, but SDXC Cards are not. SD Cards allow portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and PDAs. SD Cards transfer data quickly, with low battery consumption. SD Card SD Card Slot
(relative location on rear) SD Card Slot SD Card Figure 21. SD Card Slot - Front Access Figure 22. SD Card Slot - Rear Access Installing SD Cards When holding the Tablet PC in horizontal position with the front facing you and the web camera on the left, the SD Card slot is located at the top left edge of the system, in the rear (Figures 21 and 22). To install an SD Card, follow these steps:
52 - Secure Digital Cards INSTALLING OR REMOVING AN SD CARD DURING YOUR STYLISTIC TABLET PCS SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR STYLISTIC TABLET PC. DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR STYLISTIC TABLET PC, OR BOTH. 1 See your specific card manual for instructions on the installation of your card. Some cards may require that your Tablet PC is off while installing them. 2 Make sure there is no card currently in the slot. If there is, see Removing an SD Card. 3 With the product label facing in the same direction as the display screen, insert your card into the slot. 4 Push the card firmly into the slot until it is seated in the connector. Removing an SD Card To remove an SD Card, follow these easy steps:
SEE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME CARDS MAY REQUIRE YOUR STYLISTIC TABLET PC TO BE IN SLEEP MODE OR OFF WHILE REMOVING THEM. 1 Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop]. 2 Push the SD Card in until it unlatches. It will then eject from the slot for removal. 53 - Secure Digital Cards Chapter 4 Troubleshooting Your Tablet PC Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service. Identifying the Problem If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
1 Turn off your STYLISTIC Tablet PC. 2 Make sure the AC adapter is plugged into your Tablet PC and to an active AC power source. 3 Make sure that any cards installed are seated properly. If it appears that there is a problem with a card, remove the card from the slot, thus eliminating it as a possible cause of failure. 4 Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure. 5 Turn on your Tablet PC. Make sure it has been off at least 10 seconds before you turn it back on. 6 Go through the boot sequence. 7 If the problem has not been resolved, refer to the Troubleshooting Table that follows for more detailed troubleshooting information. 54 IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE. 8 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487) Web site: http://www.computers.us.fujitsu.com/support Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any See the Configuration Label on the bottom of your Tablet PC for configuration and serial numbers. 55 - Troubleshooting Specific Problems Using the Troubleshooting Table When you have problems with your Tablet PC, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your Tablet PC. Troubleshooting Table Audio Problems. page 57 Power Failures . page 58 Hard Drive Problems. page 57 Shutdown and Startup Problems . page 60 Keyboard or Mouse Problems . page 57 Video Problems . page 61 Pen Input Problems . page 57 Miscellaneous Problems . page 62 USB Device Problems . page 58 56 - Troubleshooting Problem Audio Problems Possible Cause Possible Solutions There is no sound coming from the built-in speaker. The volume is turned too low. Adjust the volume control on your Tablet PC and operating system. Click the Volume icon in the system tray on the bottom right of the screen. (It looks like a speaker). If the Mute box has a red circle on it, click on it to deselect it. Headphones are plugged into your Tablet PC. Plugging in headphones disables the built-in speaker. Remove the headphones. Hard Drive Problems You cannot access your hard drive. The wrong drive designator was used by an application when a bootable disc was used to start the Tablet PC. Security is set so your operating system cannot be started with-
out a password. Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted. Verify your password and security settings. Keyboard or Mouse Problems You have installed an optional external keyboard or mouse, and it does not seem to work. You have connected an external keyboard or a mouse and it seems to be locking up the system. Pen Input Problems Your operating system is not set up with correct software driver for that device. Check your device and operating system documentation and activate the proper driver. Your operating system is not setup with correct driver. Check your device and operating system documentation and activate the proper driver. Your system has crashed. Try to restart your Tablet PC. Cursor isnt tracking the pen. Display needs to be calibrated See Calibrating the Display on page 29. for more information. 57 - Troubleshooting Problem Possible Cause Possible Solutions Tablet is not responding to the pen System may have crashed. If the Tablet PC does not respond to the pen, connect an external keyboard to the system to see if it responds to keyboard commands. If the system doesnt respond to a keyboard, the application or system may have crashed, and it may be necessary to reboot the system. If the system responds to a keyboard but not to a pen, contact your local help desk or reseller, or call Fujitsu Service and Support at 1-800-8Fujitsu
(1-800-838-5487) for further assistance. Memory Problems Your System screen in the Control Panel does not show the correct amount of installed memory. USB Device Problems Your system doesnt recog-
nize a USB device you installed, or the device doesnt work properly. Power Failures You have a memory failure. Check for Power On Self Test (POST) messages. See Power On Self Test Messages on page 62. The device is not properly installed. The device may have been installed while an application was running, so your system is not aware of its installation. Your device may not have the correct software driver active. Remove and re-install the device. Close the application and restart your Tablet PC. See your software documentation and activate the correct driver. You turn on your Tablet PC and nothing seems to happen. The installed battery is com-
pletely discharged or there is no power adapter installed. Check the Status Indicator Panel to determine the presence and condition of the bat-
tery. See Status Indicator Panel on page 22. Install a charged battery or a Power adapter. The battery is installed but is faulty or very low. When the battery reaches a critically low level, the system is forced into Sleep mode to avoid a total system power failure. To correct this problem, either connect an external power supply (such as the AC adapter), or install a charged battery in the Tablet PC. 58 - Troubleshooting Problem Possible Cause Possible Solutions You turn on your Tablet PC and nothing seems to happen.
(continued) System is at a critical thermal limit. To avoid damage to heat-sensitive components, the system enters sleep mode when it gets too hot. System operation cannot be resumed until the Tablet PC cools off to a tolerable temperature. Move the Tablet PC to a cooler location. AC power adapter is not plugged in properly. Verify that your adapter is connected correctly. See Power Sources on page 37. The power adapter has no power from the AC or airline outlet. Move the AC cord to a different outlet, or check for a line switch or tripped circuit breaker. If you are using an auto/airline adapter in a car be sure the ignition switch is in the On or Accessories position. The power adapter is faulty. Try a different power adapter. Your STYLISTIC Tablet PC turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. Move the mouse to restore operation. If that fails, push Power/Suspend/Resume switch. Check your power management settings, or close your applications and go to Power Options located in the Control Panel to adjust timeouts to better suit your needs. Your power adapter has failed or lost its power source. You ignored a low battery alarm until the battery entered Dead Battery Suspend mode. You have a battery failure. Make sure the adapter is plugged in and the outlet has power. Install a power adapter, then push the Power/Suspend/Resume switch. See Power Sources on page 37. Verify the condition of the battery using the Status Indicator panel. If the battery is shorted, replace or remove it. See Status Indicator Panel on page 22. Your Tablet PC will not work on battery alone. The installed battery is dead. Replace the battery with a charged one or use an adapter. No battery is installed. Install a charged battery. Battery is improperly installed. Verify that the battery is properly connected by re-installing it. Your installed battery is faulty. Verify the condition of the battery using the Status Indicator panel and replace or remove any batteries that are shorted. See Status Indicator Panel on page 22. 59 - Troubleshooting Problem The battery seems to discharge too quickly. Possible Cause Possible Solutions The power savings features may be disabled. Check the Power Options menu settings and adjust according to your operating needs. The brightness is turned all the way up. Turn down the brightness adjustment. The higher the brightness the more power your display uses. Youre running an application that uses a lot of power due to frequent drive access, or use of wireless devices. Use a power adapter for this application when at all possible. The battery is very old. Replace the battery. The battery was exposed to high temperatures. Replace the battery. The battery is too hot or too cold. Restore the Tablet PC to normal operating temperature. Charging icon on the Status Indicator panel will flash when battery is outside of operating range. Shutdown and Startup Problems The Suspend/Resume switch does not work. Suspend/Resume switch is disabled. There may be application soft-
ware. conflict You have a secured system requiring a password to load your operating system. The system powers up and displays power on informa-
tion, but fails to load the operating system. To enable the button, go to Control Panel -> Power Options and click on the Advanced tab. In the Power buttons area, select the Change what the power button does option. Close all applications and try the button again. Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as accordingly. See BIOS Setup Utility on page 41. The boot sequence settings of the setup utility are not com-
patible with your configuration. Set the operating source by pressing the [F12] key while the Fujitsu logo is on screen or use the [F2] key and enter the setup utility and adjust the source settings from the Boot menu. See BIOS Setup Utility on page 41. Hard drive was not detected. Use BIOS setup utility to auto detect the internal hard drive. 60 - Troubleshooting Problem Possible Cause Possible Solutions An error message is dis-
played on the screen during the boot sequence. Power On Self Test (POST) has detected a problem. See the Power On Self Test (POST) messages to determine the meaning and severity of the problem. Not all messages are errors; some are simply status indicators. See Power On Self Test Messages on page 62. Your Tablet PC appears to change setup parameters when you start it. BIOS setup changes were not saved when made and you exited the setup utility. Video Problems The display is blank when you turn on your Tablet PC. Power management timeouts are set for short intervals and you didnt see the display go on and off again. Make sure you select Save Changes And Exit when exiting the BIOS setup utility. Move the mouse to restore operation. If that fails, push the Power/Suspend/Resume switch. (The display may be shut off by Sleep mode, Auto Suspend or Video Timeout) The Tablet PC turned on with a series of beeps and the display is blank. Power On Self Test detected a failure which does not allow the display to operate. Contact your support representative. The display goes blank by itself after you have been using it. The display has bright or dark spots. Power management timeouts are set for short intervals and you failed to notice the display come on and go off again. The Tablet PC has gone into Sleep or Hibernate mode because you have not used it for a period of time. If the spots are very tiny and few in number, this is normal for a large LCD display. If the spots are numerous or large enough to interfere with your operation needs. Push the Power/Suspend/Resume switch. (The display may be shut off by Sleep Mode, Auto Suspend or Video Timeout) Push Power/Suspend/Resume switch. Check power management settings, or close applications and go to the Power Savings menu of the setup utility to adjust timeout values to suit your needs. See BIOS Setup Utility on page 41. This is normal; do nothing. Display is faulty; contact your support representative. 61 - Troubleshooting Problem Miscellaneous Problems Possible Cause Possible Solutions Error message displayed on the screen during operation of an application. Application software often has its own set of error message dis-
plays. See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. Power On Self Test Messages The following is a list of error-and-status messages that the Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check the operating system documentation on screen and in the manual. If you can find no reference to the message, contact a support representative.
*Invalid NVRAM Data Problem with NVRAM access. In the unlikely case that you see this message you may have a display problem. You can continue operating but should contact your support representative for more information.
*Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted.
*Real time clock error - Check date and time settings Real-time clock fails BIOS test. May require board repair. Contact your support representative. 62 - Troubleshooting Restoring Your System Image and Software It is very important that you create DVD copies of your Factory Image and Bootable Disc before beginning to use your system. To do so, follow the instructions in the Saving Your Factory Image and Creating Backup Images of Factory Image and Discs sections of this chapter. Saving and Recovering Your Factory and System Images Along with instructions on saving your Factory Image, this document outlines several other important procedures, such as making a system image, restoring your Factory Image and system images, managing your images, and restoring the partitions on a hard drive. IN ORDER TO MAKE COPIES OF FACTORY AND SYSTEM IMAGES AND BURN BOOTABLE DISCS YOU MUST HAVE AN INTERNAL OR EXTERNALLY CONNECTED WRITABLE DVD DRIVE. IT IS EXTREMELY IMPORTANT THAT YOU COPY YOUR FACTORY IMAGE TO REMOVABLE MEDIA (E.G., DVD DISCS). FAILURE TO DO SO COULD RESULT IN AN INABILITY TO RESTORE THE IMAGE AT A FUTURE DATE. WE RECOMMEND THAT YOU USE DVD-R OR DVD+R DISCS FOR YOUR BACKUP, BUT SUPPORTED MEDIA* FOR IMAGE BACKUPS INCLUDE:
FOR FACTORY IMAGE, APPLICATION DATA, AND BOOTABLE DISC: DVD-R/+R. FOR USER-CREATED BACKUP IMAGE: DVD-R/+R, DVD-RW/+RW, DVD-DL.
* DEPENDING UPON YOUR OPTICAL DRIVE AND MEDIA FORMAT USED, SOME MEDIA TYPES MAY BE INCOMPATIBLE FOR CREATING IMAGE BACKUPS. DUE TO CERTAIN LICENSING REQUIREMENTS, SOME THIRD-PARTY APPLICATIONS WILL NEED TO BE INSTALLED SEPARATELY. Saving your Factory Image When you purchased your new system, a copy of the pre-installed Factory Image was loaded into a hidden partition on your hard disk drive. Having a copy of the original Factory Image available to you means that in the event of system failure, you will be able to restore it to its original state. 63 - Restoring Your System Image and Software To make a copy of the Factory Image to DVD discs, you will need four or five blank discs (DVD-R or DVD+R discs are recommended) to create the copy. After creating the copy, be sure to label the discs and keep them in a safe place to ensure they do not get damaged. Creating Backup Images of Factory Image and Bootable Disc Using the [Manage/Change] button, you can create backup images of the Factory Image and/or Bootable Disc. ALL USER-CREATED DATA WILL BE DELETED FROM YOUR SYSTEM WHEN THE FACTORY IMAGE IS RESTORED. 1 Launch System Backup and Restore from the desktop icon and click [Yes] on the User Account Control dialog. 2 Click [Next] on the Backup Your Data screen. 3 Select the [Manage/Create] tab, then click [Make Recovery Disc set] to burn your factory image to DVD. 4 On Step 1: Please select a media type for Recovery Disc screen select Media Type from the drop down box, then click [Next]. (Note: This screen shows the number of discs required for backup.) 5 On Step 2: Confirm your Recovery Disc both the Bootable Disc and Recovery disks are selected by default under List of Recovery Discs. When the backup is created for the first time, these options should stay selected. Click
[Next]. 6 Click [OK] on the Attention about media confirmation screen. DURING THE FOLLOWING PROCESS, YOU SHOULD CONNECT AN AC ADAPTER SINCE THE PROCESS MAY TAKE A LONG TIME. 7 Click [Start] on Step 3: Making Recovery Disc . 8 The process will prompt you to insert your discs. 9 Once the process completes successfully, click [Finish] on Step 4: Making Recovery Disc process has been completed screen. 64 - Restoring Your System Image and Software Recovering Your Factory Image. In the event you need to restore your original Factory Image, perform the following steps. ALL USER-CREATED DATA WILL BE DELETED FROM YOUR SYSTEM WHEN THE FACTORY IMAGE IS RESTORED. In order to recover your Factory Image, perform the steps outlined in Running Recovery and Utility from hard disk. Backing Up a System Image Optional Step: Launch the Fujitsu Bonus Apps utility from your desktop, and select the components you wish to install. (Alternatively, you can access Bonus Apps by opening Charms panel from Modern Start screen and searching for "Fujitsu BonusApps".) User-Configured System Backups: On your desktop, there is a [System Backup and Restore] icon that allows you to make backups of your current system image either to another location on your hard drive or on removable media. A system image is the configuration of your C: drive at a particular point of time. You may want to make system image backups occasionally in order to have points to which you can return without having to go all the way back to the Factory Image. By default, system images are saved in the D: drive in the System Backup and Restore folder. You can also elect to save the image to an external hard drive. 1 Launch System Backup and Restore from the desktop icon and click [Yes] on User Account Control dialog 2 Click [Next] on Backup Your Data screen 3 Select the [Backup] tab on System Backup and Restore screen. 4 Click the [Backup User System] button. 65 - Restoring Your System Image and Software 5 On the Step 1: Select a backup destination screen select your destination drive. By default the Destination is set to D: drive. You can also select the [Other drive] option to back up to an external drive. Select whether you would like the system to [Shutdown] or [Restart] after the process is completed. 6 On the Step 2: Name your backup images screen that appears, you can enter up to 300 characters of information about the backup file. This information will help you to identify the image at a later date. 7 On Step 3: Backup the entire C: drive image verify your backup settings and click [Next]. 8 Click [OK] on Step 4: Please confirm the following before starting your backup to restart you computer and begin backup. 9 After backup completes and the system restarts, Step 5: Backup Completed. Confirm the results screen should appear on your desktop confirming that backup image has been created successfully. Click [Close] to close System Backup and Restore dialog. 10 Click [OK] to quit the System Backup and Restore utility. Managing Your Backup Images With the System Backup and Restore tool you can also make copies of backup images, archive them on DVD, or delete them from your hard drive. 1 Launch System Backup and Restore from the desktop icon and click [Yes] on User Account Control dialog. 2 Click [Next] on the Backup Your Data screen. 3 Select the [Create/Manage] tab and click on [Manage User System Backup]. 4 In the next window there are three options allowing you to [Copy], [Delete], or [Add Comment] to your images. Click the action button you would like to perform:
Selecting [Copy] option (Note that you must have an external disk drive connected for the [Copy] button to work, otherwise an attempt to copy will result in an error.) a. On Step 1: Select a backup file that you wish to copy, select the location of a backup file. A list of backup files will appear. Select the file you wish to copy from the list and click [Next]. 66 - Restoring Your System Image and Software b. On Step 2: Select a drive to copy a backup file, select the destination drive and click [Next]. c. On Step 3: Start to copy the following information confirm the information and click [Start]. d. Step 4: Processing backup data copying screen displays the progress bar. e. Click [Finish] on Step 5: Copy completed. Confirm the results screen. Selecting Delete option a. On Step 1: Please select your target data screen select location of a backup file. A list of backup files will appear. Select the file(s) you wish to delete and click [Next]. b. Click [Start] on Step 2: Delete backup data screen. c. Click [OK] to the confirmation message. d. Click [Finish] on Step 4: Delete process has been completed screen. Selecting Add Comment option a. On the Step 1: Select target data screen select location of a backup file. A list of backup files will appear. Select the file you wish to add comments to and click [Next]. b. On the Step 2: Add comment screen, type in a maximum of 300 characters in Comment text area and click [Add]. c. Click [Finish] on the Step 3: Adding comment has been completed screen. Restoring your backup images 1 Launch System Backup and Restore from the desktop icon and click [Yes] on the User Account Control dialog 2 Click [Next] on the Backup Your Data screen 3 Select the Restore tab and click on Restore User System Backup 4 On Step 1: Please confirm the following before starting restore process, confirm information and click [OK]. The system will restart to begin restoring your backup. 67 - Restoring Your System Image and Software 5 After the system restarts, the Explanation about Restore User System Backup screen is shown. Once you read the EULA, select [Agree] choice and click [Next]. 6 Select an image to restore from the Backup data list and click [Next]
7 Click [Start] on Confirm before restoration screen 8 Once restoration finishes, click [Close] in Finished restoration screen, the computer will restart to Windows. Using the Recovery and Utility Tools The Recovery and Utility tools consist of a variety of tools that will help you recover your Factory Image, recover system images, and delete the data from your hard disk. Methods for accessing the utilities Recovery and Utility Tools are preinstalled in a hidden partition by the factory, or they can be accessed by using the bootable disc. Please note that you can delete Recovery and Utility tools from your hard disk drive if you modify the partitions. In this case you will not be able to use the hidden partition for booting to Recovery and Utility Tools, but you will still be able to boot from the Bootable Disc. Determining whether Recovery and Utility is pre-loaded 1 Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. 2 From the Boot Menu that appears, check whether the <Recovery and Utility> option is present. If it is not present, it means that the utility must be used from the disc. Proceed to Running Recovery and Utility from the Bootable Disc if <Recovery and Utility> is unavailable. Running Recovery and Utility from hard disk 1 Turn on or reboot your system. When the Fujitsu logo appears, press the [F12] key. 2 Cursor down to <Recovery and Utility> and press the [Enter] key. 3 Choose your Language (English or French). 4 Three tool options appear: Diagnostics, Recovery and Utility (Please see Recovery and Utility tools section below for instructions on how to use these tools). 68 - Restoring Your System Image and Software Running Recovery and Utility from the Bootable disc To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps:
1 Power on your system. When the Fujitsu logo appears on the screen. press the [F12] key. 2 Highlight the CD/DVD option from the Boot menu, then press [Enter]. 3 Insert the bootable disc into the drive tray. 4 Click [OK]. 5 Select CD/DVD boot mode: UEFI Mode and press [Enter]. While the files are being loaded from the disc, the Fujitsu logo screen will appear followed by a progress bar screen at the bottom of the screen. Recovery and Utility tools Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you will need to use this tool. If you should need to use this tool, perform the following steps:
1 Press the Diagnostics Tool button to start the Diagnostics tool. A progress bar appears while the Diagnostics tool is starting up. 2 Read the note, then click [OK]. 3 Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics Tool window:
CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse. Click the [Option] button to specify how many times the tool should run diagnostics on each selected component. Press [Execute] to start the Diagnostics tool. 4 After the execution is completed, the selected components are circled in red to indicated that they have been diagnosed and the result dialog window is opened. 5 Click [End] to close the Diagnostics tool, then click [Yes] to confirm the end of diagnostics session. Recovery tool: The Recovery tool contains three options. User System Backups: Recovering C: Drive from D: Drive or external storage device), Restore C: Drive: Restore factory image (only C: drive), and Restore Full Hard Drive:
69 - Restoring Your System Image and Software Restore factory image (full hard drive).You can use these tools to restore the Factory Image from the hidden partition, restore backup image(s) created by you or images stored on DVD discs, and perform a full hard drive recovery. Please refer to instructions above for details on how to create Factory Image Recovery DVDs, user backup DVDs and system image backup. To recover from D: drive or external storage device:
1 Click [User System Backups]
2 The progress bar screen is followed by EULA screen. Click [Agree] to accept the EULA. 3 On Select an image to restore screen select the image to restore from the list of images and click [Next]. 4 Click [Start] on the Confirm before restoration screen to begin the restoration process. 5 Once restoration finishes, click [Close] in the Finished restoration screen; the computer will restart to Windows. To restore from the Factory Image (hidden partition):
1 Click [Restore C: drive]. 2 The progress bar screen is followed by Restore Factory Image (only C: drive) screen confirming that the Factory Image will be restored to the C: drive and D: drive data will remain. Click [Next]. 3 Read the instruction screen and select [Agree], then [Next]. 4 Click [OK] to the warning message to restore factory image to the C: drive. 5 When the progress bar screen, wait for the process to complete. 6 Click [Finish] when the process completes; the computer will restart to Windows. To restore full hard drive:
Follow the steps in section Recovering your Factory Image using Recovery and Utility (for new hard drive or non-bootable hard drive) 70 - Restoring Your System Image and Software Utility tool: The Utility tool contains two options: Hard Disk Data Delete and Partition Creation. The Hard Disk Data Delete utility is used to delete all data on the hard disk and prevent the data from being reused. NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions. To delete hard disk data:
a. Click the [Hard Disk Data Delete] button b. The progress bar appears, followed by the EULA screen. c. Agree to the EULA and click [Next]. d. Choose the hard disk from which the data should be deleted in the list of hard disks and click [Next]. The Partition Creation utility is used to change the C: and D: drive partition sizes. To run this utility:
a. Click the [Partition Creation] button. b. A progress bar screen appears, followed by the EULA screen. Agree to the EULA. c. On the Recovery Tool - Partition Creation screen move the slider to set disk size, then click [OK]. d. Click YES in the Partition Creation confirmation dialog. Recovering your Factory Image using Recovery and Utility (for new hard drive or non-bootable hard drive) If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. 1 Power on your system. When the Fujitsu logo appears on the screen, press the [Enter] key. 2 Highlight the CD/DVD option from the Boot Menu and press [Enter]. 3 Insert the bootable disc in your DVD drive, then click [OK]. 4 Select CD/DVD boot mode: UEFI Mode and press [Enter]. While the files are being loaded from the disc, Fujitsu logo screen will appear followed by a progress bar screen at the bottom of the screen. 5 Choose your language (English or French). 6 Three tool options appear: Diagnostics, Recovery and Utility. Select [Recovery]. 71 - Restoring Your System Image and Software 7 Select [Restore full hard drive]. 8 Click [Next] to confirm full hard drive restoration. (All data on HDD will be deleted). 9 Agree to EULA by selecting [Agree] option and clicking [Next]. 10 Click [Next] on the Recovery Disk Check screen to verify that the bootable disk has been inserted into the optical drive. 11 The Checking for Recovery Disk screen appears followed by the prompt to insert the first disk. Click [OK] to continue. Repeat this step for all disks. After all recovery disks have been checked and the check has been completed, click [Next]
12 Reinsert the first recovery disk and click [Next]
13 Click [OK] when you receive the final warning informing you that all data on drives C: and D: will be lost. This starts the recovery process. 14 Follow the prompts to insert the next recovery disks and click [OK]. 15 After the copying of the factory image to the HDD completes and the factory image is restored, follow the prompt to insert bootable disk. 16 After the restore process is complete, click [Finish] to restart the system. The computer will restart automatically and then go through the first boot process. Downloading Driver Updates The Fujitsu Software Download Manager (FSDM) utility is available to allow you to download the latest drivers, utilities, and applications from the Fujitsu Support site. If you have a Windows 8 or Windows 7 operating system, you will need to go to the Support Site (http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS). 72 - Restoring Your System Image and Software Chapter 5 Care and Maintenance Caring for your Tablet PC If you use your STYLISTIC Tablet PC carefully, you will increase its life and reliability. This section provides some tips for looking after the Tablet PC and its devices. THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD). TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING PRECAUTIONS:
IF YOU DROP YOUR TABLET PC OR DAMAGE THE HOUSING IN ANY WAY, IMMEDIATELY TURN OFF POWER AND DISCONNECT THE POWER PLUG. FAILURE TO DO SO COULD RESULT IN A SHORT CIRCUIT, SMOKE, AND/OR FIRE. CONTACT FUJITSU SERVICE AND SUPPORT BY PHONE AT 1-800-8FUJITSU (1-
800-838-5487), BY EMAIL AT 8FUJITSU@US.FUJITSU.COM, OR THROUGH THE WEBSITE AT HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO LEARN HOW TO GET THE SYSTEM REPAIRED. BEFORE DOCKING OR UNDOCKING YOUR TABLET PC (WHEN USING A DOCKING CRADLE), IT IS GOOD PRACTICE TO TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC ELECTRICITY IN YOUR BODY. ELECTRICAL EQUIPMENT MAY BE HAZARDOUS IF MISUSED. OPERATIONS OF THIS PRODUCT OR SIMILAR PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE INTERIOR OF ANY ELECTRICAL PRODUCTS AND DO NOT PERMIT THEM TO HANDLE ANY CABLES. Your STYLISTIC is a durable but sensitive electronic device. Treat it with respect and care. Make a habit of transporting it in a suitable carrying case. Do not attempt to service the computer yourself. Always follow installation instructions closely. Keep it away from food and beverages. 73 If you accidentally spill liquid on your STYLISTIC Tablet PC:
1 Turn it off. 2 Position it so that the liquid can run out and let it dry out for 24 hours, or longer if needed. 3 If your Tablet PC will not boot after it has dried out, call your support representative. Do not use your Tablet PC in a wet environment (near a bathtub, swimming pool). Always use the AC adapter and batteries that are approved for your Tablet PC. Avoid exposure to sand, dust and other environmental hazards. Do not expose your Tablet PC to direct sunlight for long periods of time as temperatures above 140 F (60 C) may damage your Tablet PC. Do not put heavy or sharp objects on the computer. Cleaning your Tablet PC General instructions Always shut down the computer, unplug the power adapter, and remove the battery when cleaning or disinfecting the computer exterior, keyboard or LCD display. Cleaning guidelines using recommended off-the-shelf cleaners Computer exterior, computer keyboard To clean the exterior and keyboard, use one of the following off-the-shelf products only:
Office Depot #154-616 Notebook Cleaning Kit Meridrew Enterprises Klear_Screen Wipes 3M CL563 Cleaner Wipes Note: After cleaning with one of these products, gently polish with a dry, soft, lint-free cloth until the solution is no longer visible. 74 - Caring for your Tablet PC LCD display, fingerprint sensor*
To clean the LCD display or fingerprint sensor, use one of the following off-the-shelf products only:
Office Depot #154-616 Notebook Cleaning Kit Meridrew Enterprises Klear_Screen Wipes
* Applies to Tablet PC, convertible PC with LCD shield, and standard notebook LCD displays. Note: Wipe the LCD surface gently, allowing it to dry before turning on the computer. Disinfecting guidelines using recommended off-the-shelf disinfectants To disinfect the Tablet PC, use one of the following off-the-shelf products only:
Veridien ViraGuard Hospital Disinfectant Veridien ViraGuard Disinfectant Wipes before turning on the computer. 1 Disinfect the surface with a soft cloth which has been lightly dampened with the solution. Allow the surface to dry OR 2 Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide which has been registered as a hospital disinfectant by the EPA . USE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE LCD AND/OR DAMAGE TO THE COMPUTER. ALWAYS REFER TO THE CLEANER MANUFACTURER'S GUIDELINES AND MATERIAL SAFETY DATA SHEETS FOR PROPER HANDLING AND USE OF THE PRODUCTS. NEVER USE AMMONIA, ACIDIC, OR ALKALINE CLEANERS OR ORGANIC CHEMICALS SUCH AS PAINT THINNER, ACETONE, PROPYL OR ISOPROPYL ALCOHOL, OR KEROSENE. IT MAY DAMAGE SURFACE FINISHES AND THE COATING OF THE LCD SCREEN. NEVER USE COMPRESSED AIR FOR CLEANING YOUR COMPUTER. 75 - Caring for your Tablet PC Storing your Tablet PC If storing your Tablet PC for a month or longer, turn it off, fully charge the battery, then remove and store all Lithium Polymer batteries. Store your Fujitsu STYLISTIC in a cool, dry location. Temperatures should remain between 13F
(-25C) and 140F (60C). Store your tablet and batteries separately. If you store your system with a battery installed, the battery will discharge, and battery life will be reduced. In addition, a faulty battery might damage your system. ALWAYS POWER OFF THE COMPUTER BEFORE TRANSPORTING AND/OR PACKAGING IT. AFTER SHUTTING DOWN THE SYSTEM, WAIT UNTIL THE STATUS LED PANEL INDICATES POWER OFF CONDITION (I.E., NO LIGHTS ARE ILLUMINATED). IT IS POSSIBLE THAT THE UNIT MAY NOT AUTOMATICALLY GO TO POWER OFF OR HIBERNATE MODE WHEN YOU CLOSE THE LID. THIS SITUATION MAY OCCUR DUE TO PRE-OS BOOT PASSWORD SECURITY SETTINGS OR SOME OTHER APPLICATION RUNNING ON THE COMPUTER. ATTEMPTING TO TRANSPORT THE COMPUTER WHILE POWER IS ON MAY DAMAGE THE TABLET PC DUE TO SHOCK OR OVERHEATING. Traveling with your Tablet PC Do not transport your Tablet PC while it is turned on. You should carry your Tablet PC with you while traveling, rather than checking it in as baggage. Never put your Tablet PC through a metal detecto; have it hand-inspected by security personnel. You can however, put your Tablet PC through a properly tuned X-ray machine. To avoid problems, place it close to the entrance of the machine and remove it as soon as possible or have it hand-
inspected by security personnel. Security officials may require you to turn your system on, so make sure you have a charged battery on hand. 76 - Caring for your Tablet PC Take the necessary plug adapters if you're traveling overseas. Check the following diagram to determine which plug adapter you'll need or ask your travel agent. Outlet Type Location Outlet Type Location United States, Canada, parts of Latin America, Mexico, Japan, Korea, the Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), most of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, most of South Asia United Kingdom, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand Batteries Caring for your Battery Always handle batteries carefully. Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects. Doing so may cause an explosion or fire. Do not drop, puncture, disassemble, mutilate or incinerate the battery. Recharge batteries only as described in this manual and only in ventilated areas. Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten the life of your battery. Do not leave a battery in storage for longer than 6 months without recharging it. Increasing Battery Life Power your Tablet PC through the AC or optional auto/airline adapter whenever possible. If your tablet runs on battery power all day, connect it to an AC adapter overnight to recharge it. 77 - Caring for your Tablet PC Keep brightness to the lowest level comfortable. Set the power management for maximum battery life. Put your Tablet PC in Sleep mode when it is turned on and you are not actually using it. Limit your media drive access. Disable the Media Player auto insert notification function. Media Care Caring for your Media (when optional external optical drive is installed) Media discs are precision devices and will function reliably if given reasonable care. Always store your media disc in its case when it is not in use. Always handle discs by the edges and avoid touching the surface. Avoid storing any media discs in extreme temperatures. Do not bend or scratch media discs or set heavy objects on them. Do not spill liquids or get dust on media discs. Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen. If a disc is dirty, use only a DVD/CD cleaner or wipe it with a clean, soft, lint free cloth starting from the inner edge and wiping to the outer edge. If a disc is subjected to a sudden change in temperature, condensation may form on the surface. Wipe moisture off with a soft, lint free cloth and let it dry at room temperature. DO NOT use a hair dryer or heater to dry media discs. Caring for an Optional Optical Drive An optional optical drive is durable but you must treat it with care. Please pay attention to the following points:
The drive rotates the compact disc at a very high speed. Do not carry it around or subject it to shock or vibration with the power on. Avoid using or storing the drive where it will be exposed to extreme temperatures. Avoid using or storing the drive where it is damp or dusty. Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. 78 - Caring for your Tablet PC Avoid using or storing the drive where it will be subjected to shock or vibration. Do not disassemble or dismantle the optical drive. Use of a commercially available lens cleaner is recommended for maintenance of your drive. Secure Digital Cards Caring for your Cards Secure Digital Cards are durable, but you must treat them with care. The documentation supplied with your card will provide specific information, but you should pay attention to the following points:
To keep out dust and dirt, store cards in their protective sleeves when they are not installed. Avoid prolonged exposure to direct sunlight or excessive heat. Keep the cards dry. Do not flex or bend the cards, and do not place heavy objects on top of them. Do not force cards into the slot. Avoid dropping cards, or subjecting them to excessive vibration. 79 - Caring for your Tablet PC Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu STYLISTIC Tablet PC. Specifications of particular configurations will vary. Microprocessor AMD Z60 APU (with AMD Radeon HD 6250 Graphics) Chipset AMD A68M FCH Memory System Memory DDR3-1066 MHz SDRAM memory module Fixed 4GB of total memory depending upon configuration Cache Memory 1MB L2 cache on-die 80 Video Video Color and Resolution Anti-glare 10.1" HD LED backlit IPS display Internal: 1366 x 768 pixel resolution, 16M colors HDMI: 1920 x 1080 pixel resolution, 16M colors Simultaneous: 1366 x 768, 16M colors 160 vertical and horizontal viewing angles Digitizer N-trig DuoSense technology. Dual Digitizer, consisting of active digitizer and capacitive touch panel (uses active stylus input and up to 10 finger touch input). Video RAM AMD Radeon HD 6250 graphics Win8/Win7 (32bit): max 1908MB (HyperMemory) when the main memory is 4GB Win8/Win7 (64bit): max 1964MB (HyperMemory) when the main memory is 4GB Audio Realtek codec ALC269 Headphones: Stereo headphone jack, 3.5 mm, 1 Vrms or less, minimum impedance 32 Ohms Two built-in stereo speakers Two built-in dual analog microphones Mass Storage Device Options Hard Drive Options FDE Solid State Drive, S-ATA/300 (3.0Gbps), 64 GB, with TRIM command support FDE Solid State Drive, S-ATA/300 (3.0Gbps), 128 GB, with TRIM command support Solid State Drive, S-ATA/300 (3.0Gbps), 256 GB, with TRIM command support 81 - Specifications Communications WLAN: Mitsumi MW-W095 (Broadcom: 43241) Bluetooth: Broadcom BCM20702 Bluetooth USB device for wireless personal area network communication WWAN: Wireless Gobi 5000 EM7355 Security Features Trusted Platform Module The STYLISTIC Q584 Tablet PC may have an optional Trusted Platform Module (TPM) installed for added system security. Fingerprint Recognition Sensor Swipe sensor for biometric security. SmartCard Slot Integrated SmartCard slot (requires third-party application) Device Ports On the STYLISTIC Tablet PC:
SD Card slot Two USB 2.0 (Universal Serial Bus) connectors for input/output devices One DC In connector One HDMI connector Docking port (40-pin, to dock with optional STYLISTIC Docking Cradle) One stereo headphone jack 5.0 megapixel auto-focus rear-facing web camera, HD (1240 x 720 pixel) front-facing web camera On the Optional STYLISTIC Docking Cradle Three USB 2.0 connectors for input/output devices One Ethernet LAN connector 82 - Specifications One DC-in connector One docking connector (40-pin, to dock with Tablet PC) Power Battery Lithium Polymer Battery, 2 cells, 7.2V, 36Wh, 5000 mAh AC Adapter Autosensing 100-240V AC, supplying 19V DC, 3.16A, 60W to the Tablet PC; includes an AC cable Power Management Conforms to ACPI (Advanced Configuration and Power Interface). Dimensions and Weight Overall Dimensions Approximately 10.76" (w) x 6.93" (d) x 0.54" (h) (273.5 x 176 x 13.6 mm) Weight Approximately 1.65 lb. (748g) Environmental Requirements Temperature Operating: 41 to 95 F (5 to 35 C). Non-operating: 5 to 140 F (15 to 60 C) Humidity Operating: 20% to 85%, relative, non-condensing. Non-operating: 8% to 85%, relative, non-condensing Altitude Operating: 10,000 feet (3,048 m) maximum 83 - Specifications Popular Accessories For ordering or additional information on Fujitsu accessories please visit our Web site at www.shopfujitsu.com or call 1-800-FUJITSU. Included Software Depending on your pre-installed operating system, your Tablet PC comes with software for playing audio and video files of various formats. In addition there is virus protection software and Power Management software. The following list indicates the software included with your system. Adobe Reader Norton Studio Skype OmniPass Fingerprint application Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them upon installation. We highly recommend that you step through the tutorial before you use an application. Manuals Included with your Tablet PC you will find manuals for your installed operating system and other pre-installed software. Any manuals that are not included, are available online through the help system of the software. We recommend that you review these manuals for general information on the use of these applications. Adobe Reader The Adobe Reader allows you to view, navigate, and print PDF files from across all of the major computing platforms. Norton Studio Easily manage your Norton protection for your PCs and other devices right from your Windows 8 tile interface desktop. Designed and optimized for Windows 8 tile interface, Norton Studio lets you view, control, fix, update, and renew all your Norton protection products from a single screen. 84 - Specifications OmniPass Fingerprint application The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass lets you use a "master password" for all Windows, applications, and on-line passwords, and presents a convenient user interface through which you can securely manage passwords, users, and multiple identities for each user. Skype Skype allows users to communicate with peers by voice, video, and instant messaging over the Internet. Skype can be used to place phone calls on traditional telephone networks. Calls to other users within Skype are free, while calls to landlines and cell phones are charged via a user account system. Skype is also a popular tool for file transfer and teleconferencing. Operating System The following operating system configuration is installed on your system:
Microsoft Windows 8 Professional Edition 85 - Specifications Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this users authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet that is on a different circuit than the receiver. Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. 86 - Regulatory Information Appendix A: WLAN Users Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identified as harmful. In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. THE PRODUCT ID LABEL IS LOCATED IN THE BATTERY COMPARTMENT. THE LABEL CAN BE SEEN BY REMOVING THE BATTERY AS PER INSTRUCTIONS ON PAGE 50. LTIQUETTE DIDENTIFICATION DU PRODUIT EST SITUE DANS LE COMPARTIMENT DE LA BATTERIE. POUR VOIR LTIQUETTE, RETIREZ LA BATTERIE CONFORMMENT AUX INSTRUCTIONS DE LA PAGE 50. 87 Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral. Federal Communications Commission and Industry Canada statement:
This device complies with Part 15 of FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. Dclaration dIndustrie Canada Cet appareil est conforme la Section 15 des Rgles de la FCC et la (aux) norme(s) RSS concernant les appareils exempts de licence par Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1 Reorient or relocate the receiving antenna. 2 Increase the distance between the equipment and the receiver. 88 -
Figure A-1. Ad Hoc Mode Network 3 Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4 Consult the dealer or an experienced radio/TV technician for help. FCC/IC Radio Frequency Exposure statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada. This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device directly contacted to the body. Dclaration de la FCC/dIndustrie Canada sur lexposition aux radiofrquences La norme rgissant lexposition des appareils sans fil aux radiofrquences emploie une unit de mesure dnomme Taux dabsorption spcifique, ou TAS. La FCC et Industrie Canada ont dfini la mme limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites dexposition gnrales de la population/non contrles dfinies par les rgles C95.1-1992 de lANSI/IEEE et RSS 102 dIndustrie Canada ; il a t test en conformit avec les mthodes et procdures de mesure spcifies dans le supplment C du bulletin 65 de lOET (Office dingnierie et de technologie) et la rgle RSS 102 dIndustrie Canada. Cet appareil a t test selon les directives de la FCC et dIC concernant lexposition aux radiofrquences et sest rvl conforme ces dernires lorsquil a t test en contact direct avec le corps. Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user's right to operate this equipment. 89 -
Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210. In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 -
5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avis pour le Canada Le matriel destin un usage sur la bande 5 150 - 5 250 MHz doit tre utilis uniquement lintrieur afin de rduire les risques de brouillage nuisible caus aux systmes mobiles par satellite fonctionnant sur un mme canal. Un gain dantenne de 6 dBi est autoris (pour le matriel utilisant les bandes 5 250 - 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformment la limite p.i.r.e. maximale permise selon l'annexe A9.2 affrent aux priphriques RSS210. En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance sont considrs comme des utilisateurs principaux
(ce qui signifie qu'ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu'ils pourraient causer des interfrences et/ou des dommages aux appareils de rseau exempts de licence. 90 -
Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN USB device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference. Wireless LAN Device Covered by this Document This document is applicable to systems containing the following device:
Mitsumi DMW-W095 (Broadcom: 43241 )Wireless LAN USB Device Characteristics of the WLAN Device The WLAN device is a USB module attached to the main board of the mobile computer. The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. The WLAN devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n The WLAN devices are Wi-Fi certified and operate (as applicable) at a the maximum data rate of 150 Mbps
(theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, CCX4.0, and CCX5.0. 91 - Before Using the Optional Wireless LAN Wireless LAN Modes Using this Device Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Figure 23. Ad Hoc Mode Network 92 - Before Using the Optional Wireless LAN Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases). Internet ADSL modem, cable modem, or similar Wired LAN Access Point*
Wireless LAN
*An optional hub for a wired LAN may be required depending upon the type of access point used. Figure 24. Access Point (Infrastructure) Mode Network 93 - Before Using the Optional Wireless LAN How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The operating system that your mobile computer comes with has been pre-configured to support the WLAN device. The Wireless LAN devices support IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n. The WLAN devices operate in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands. Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be deactivated by using the Wireless On/Off Switch, and it can be disconnected in Windows using the WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected.). 94 - Before Using the Optional Wireless LAN Deactivation Using the Wireless On/Off Switch The WLAN device can be deactivated quickly and efficiently by toggling the Wireless On/Off Switch to the Off position. The switch has no effect on non-Wireless LAN models. Wireless On/Off Switch Figure 25. Wireless LAN/Bluetooth On/Off Switch Location Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected. 1 Right-click the WLAN icon in the taskbar at the bottom right of your screen. 2 Choose Disconnect from a network. Activating the WLAN Device Activation of the WLAN device can be accomplished using the same methods as the deactivation process Using the Wireless On/Off Switch In Windows, by right-clicking the WLAN icon then clicking Connect to a network 95 - Before Using the Optional Wireless LAN Configuration of the WLAN Device The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software.Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:
Configuring the WLAN Using Windows 1 From Modern Start screen press [Windows]+[X], then select Control Panel from the menu. 2 If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and Sharing Center icon. Select "Setup a new connection or network". 3 Depending upon what type of connection you would like to make, make a selection. For an infrastructure network, select Manually connect to a wireless network. 4 Enter the required information. You may need to consult with your network administrator for some information. 5 In the event you require assistance, go to the Network and Sharing Center window (Control Panel -> Network and Sharing Center), and type in relevant keywords in the Search box. Connecting to a Network After you have configured your computer, you can connect to an active network by performing the following steps:
1 Click on the WLAN icon in the system tray. 2 Select Connect to a network. 3 Select a network from the list that appears, and click the [Connect] button. Connection to the network After you have configured your computer, you can connect to an active network by clicking on the Wireless Network icon in the system tray. 96 - Configuration of the WLAN Device Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. If you are unfamiliar with the steps required, consult your System Administrator or go to [Start] ->
Help and Support -> Networking and the Web Problem Possible Cause Possible Solution Unavailable network connection Incorrect network name (SSID) or network key Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been configured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Weak received signal strength and/or link quality Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better transmission. The WLAN device has been deactivated or disabled Check if the wireless switch is turned On. Go to Modern Start screen->[Windows]+[X] -> Control Panel, and double-click on Windows Mobility Center. If the wireless network is off, click the [Turn wireless on]
button. The computer to be connected is turned off Check if the computer to be connected is turned ON. 97 - Troubleshooting the WLAN Problem Possible Cause Possible Solution Unavailable network connection
(continued) RF interference from Access Points or other wireless networks The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Wireless network authentication has failed Re-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a misconfigured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. Incorrectly configured network settings Recheck the configuration of your network settings. Incorrect IP address configuration This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 98 - Troubleshooting the WLAN WLAN Specifications Specifications Item Type of network Transfer rate Active frequency Typical operating distances**
Number of channels Specification The integrated Mitsumi DMW-W095 (Broadcom: 43241) Wireless LAN USB Device conforms to IEEE 802.11a, 802.11b/g, and 802.11n, Wi-Fi based*.
(Automatic switching) 150 Mbps maximum data rate 802.11n: 2.4 GHz or 5 GHz 802.11b/g: 2400~2473 MHz 802.11a: 4900 ~ 5850 MHz 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies. 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels 802.11n: 2.4 GHz - 3 non-overlapping channels when Channel Bonding is not used; 2 non-overlapping channels when Channel Bonding is used. 5 GHz - 12 non-overlapping UNII channels with or without Channel Bonding Security Encryption Types - WEP, TKIP, AES***, WPA 1.0 compliant Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) 10 units or less ****
* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.
** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.
*** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104 bits after subtracting the fixed length of 24 bits.
**** Depending on practical environments, the allowable number of computers to be connected may be decreased. 99 - WLAN Specifications Using the Bluetooth Device Bluetooth is integrated into the WLAN module. The Bluetooth capabilities are Bluetooth Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other. TO ENABLE OR DISABLE EITHER THE WIRELESS LAN OR BLUETOOTH DEVICES INDIVIDUALLY, PERFORM THE FOLLOWING STEPS:
> TURN ON THE WLAN/BLUETOOTH SWITCH.
> GO TO THE MODERN START SCREEN -> CHARMS -> SETTINGS -> CHANGE PC SETTINGS -> WIRELESS.
> UNDER WIRELESS->WIRELESS DEVICES, CLICK ON "BLUETOOTH" SWITCH TO TURN IT ON. Where to Find Information About Bluetooth For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www.bluetooth.com. 100 - Using the Bluetooth Device FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The Bluetooth antenna is located on the front edge of the right palm rest and is exempt from minimum distance criteria due to its low power. The transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Warranty Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty. 101 - Using the Bluetooth Device Appendix B: Fingerprint Sensor Device Introducing the Fingerprint Sensor Device Your system has a fingerprint sensor device on the rear of the tablet in the top right corner. With a fingerprint sensor, you can avoid having to enter a username and password every time you want to:
Figure 26. Fingerprint sensor Fingerprint Sensor Device Log onto Windows Resume from sleep mode Cancel a password-protected screen saver Log into home pages that require a username and password 102 After you have enrolled - or registered - your fingerprint, you can simply swipe your fingertip over the sensor for the system recognize you. The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all Windows, applications, and on-
line passwords. OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to the Windows desktop. This device results in a secure authentication system for restricting access to your computer, applications, web sites, and other password-protected resources. OmniPass presents a convenient graphical user interface, through which you can securely manage passwords, users, and multiple identities for each user. Getting Started This section guides you through the preparation of your system for the OmniPass fingerprint recognition application. You will be led through the OmniPass installation process. You will also be led through the procedure of enrolling your first user into OmniPass. Installing OmniPass If OmniPass has already been installed on your system, skip this section and go directly to User Enrollment on page 106. You can determine whether OmniPass has already been installed by checking to see if the gold key-shaped OmniPass icon is present in the system tray at the bottom right of the screen. System Requirements The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OSs). The minimum requirements are as follows:
Windows XP Professional operating system or later At least 35 MB available hard disk space 103 - Introducing the Fingerprint Sensor Device Installing the OmniPass Application If OmniPass is already installed on your system, go to User Enrollment on page 106. Otherwise continue with this section on software installation. INSTALLATION OF THE APPLICATION REQUIRES THAT YOU HAVE AN EXTERNAL OPTICAL DRIVE ATTACHED TO YOUR SYSTEM. FOR INSTALLATION, OMNIPASS REQUIRES THAT THE USER INSTALLING OMNIPASS HAVE ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE PROCEEDING WITH OMNIPASS INSTALLATION. To install OmniPass on your system you must:
1 Insert the installation media for the OmniPass application into the appropriate drive. If you are installing from CD-ROM or DVD-ROM, you must find and launch the OmniPass installation program (setup.exe) from the media. 2 Follow the directions provided in the OmniPass installation program. Specify a location to which you would like OmniPass installed. It is recommended that you NOT install OmniPass in the root directory (e.g. C:\). 3 Once OmniPass has completed installation you will be prompted to restart you system. Once your system has rebooted you will be able to use OmniPass. If you choose not to restart immediately after installation, OmniPass will not be available for use until the next reboot. 4 The installation program automatically places an icon (Softex OmniPass) in the Windows Control Panel as well as a golden key shaped icon in the taskbar. Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. To check the version information of OmniPass:
104 - Introducing the Fingerprint Sensor Device 1 From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen), or, Click Modern Start screen->[Windows]+[X], and click Control Panel. Double-click OmniPass in the Control Panel, and the OmniPass Control Center will appear. If it does not appear, then the program is not properly installed. 2 Select the About tab at the top of the OmniPass Control Center. The About tab window appears with version information about OmniPass. FOR UNINSTALLATION, OMNIPASS REQUIRES THAT THE USER UNINSTALLING OMNIPASS HAVE ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE PROCEEDING WITH OMNIPASS UNINSTALLATION. Uninstalling OmniPass To remove the OmniPass application from your system:
1 Click Start on the Windows taskbar. Select Settings, and then Control Panel. 2 Double-click Add/Remove Programs. 3 Select OmniPass, and then click Change/Remove. 4 Follow the directions to uninstall the OmniPass application. 5 Once OmniPass has finished uninstalling, reboot your system when prompted. 105 - Introducing the Fingerprint Sensor Device User Enrollment Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept Computer resources are often protected with passwords. Whether you are logging into your computer, accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access. This can result in dozens of sets of credentials that you have to remember. During user enrollment a "master password is created for the enrolled user. This master password replaces all other passwords for sites you register with OmniPass. Example: A user, John, installs OmniPass on his system (his home computer) and enrolls an OmniPass user with username John_01 and password freq14. He then goes to his webmail site to log onto his account. He inputs his webmail credentials as usual (username John_02 and password STYLISTIC), but instead of clicking [Submit], he directs OmniPass to Remember Password. Now whenever he returns to that site, OmniPass will prompt him to supply access credentials. John enters his OmniPass user credentials (John_01 and freq14) in the OmniPass authentication prompt, and he is allowed into his webmail account. He can do this with as many web sites or password protected resources he likes, and he will gain access to all those sites with his OmniPass user credentials (John_01 and freq14). This is assuming he is accessing those sites with the system onto which he enrolled his OmniPass user. OmniPass does not actually change the credentials of the password protected resource. If John goes to another computer without he OmniPass account to access his webmail, he would need to enter his original webmail credentials (John_02 and STYLISTIC) to gain access. If he attempts his OmniPass user credentials on a system other than a system hes enrolled on, he will not gain access. THE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH OMNIPASS. IF YOU DESIRE SUCH FUNCTIONALITY, CONSULT THE APPROPRIATE SECTIONS OF THIS DOCUMENT. 106 - Introducing the Fingerprint Sensor Device Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard, you can bring it up by accessing OmniPass via Control Panel. 1 Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard enters the credentials of the currently logged in Windows user. 2 Enter the password you use to log in to Windows. This will become the master password for this OmniPass user. In most cases, the Domain: value will be your Windows computer name. In a corporate environment, or when accessing corporate resources, the Domain: may not be your Windows computer name. Click [Next] to continue. 3 In this step OmniPass captures your fingerprint. Refer to Enrolling a Fingerprint on page 107 for additional information. 4 Next, choose how OmniPass notifies you of various events. We recommend you keep Taskbar Tips on Beginner mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get accustomed to how OmniPass operates. Click [Next] to proceed with user enrollment. You will then see a Congratulations screen indicating your completion of user enrollment. 5 Click [Done] to exit the OmniPass Enrollment Wizard. You will be asked if youd like to log in to OmniPass with your newly enrolled user; click [Yes]. Enrolling a Fingerprint Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure. You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click the system tray OmniPass icon. Select the User Settings tab and click Enrollment under the User Settings area. Click Enroll Authentication Device and authenticate at the authentication prompt to start device enrollment. 107 - Introducing the Fingerprint Sensor Device 1 During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to enroll and click [Next]. 2 It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen times out, click [Back] to restart the fingerprint enrollment process. Your system has a swipe fingerprint sensor. A swipe sensor is small and resembles a skinny elongated rectangle. To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger screen has a
[Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how your fingerprint is captured, proceed to enroll a finger. 3 Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically appear. To verify your enrolled fingerprint, place your fingertip on the sensor and hold it there as if you were having a fingerprint captured. Successful fingerprint verification will show a green fingerprint in the capture window and the text Verification Successful under the capture window. Using OmniPass You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your authentications. Password Replacement You will often use the password replacement function. When you go to a restricted access website (e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to enter your login credentials. OmniPass can detect these prompts and you can teach OmniPass your login credentials. The next time you go to that website, you can authenticate with your fingerprint to gain access. 108 - Introducing the Fingerprint Sensor Device OmniPass Authentication Toolbar After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass authentication system is invoked. The OmniPass authentication system may be invoked frequently: during Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming from sleep or hibernate, when unlocking a password-enabled screensaver, during password replacement for remembered site or application logins, and more. When you see this toolbar, OmniPass is prompting you to authenticate. The Logon Authentication window indicates what OmniPass-restricted function you are attempting. The icons in the lower left (fingerprint and key) show what authentication methods are available to you. Selected authentication methods are highlighted while unselected methods are not. When you click the icon for an unselected authentication method, the authentication prompt associated with that method is displayed. When prompted to authenticate, you must supply the appropriate credentials: an enrolled finger for the fingerprint capture window or your master password for the master password prompt (the key icon). Remembering a Password OmniPass can remember any application, GUI, or password protected resource with a password prompt. Using the following procedure, you can store a set of credentials into OmniPass. These credentials will then be linked to your master password or fingerprint. Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt, enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter], [Submit], [OK], or Login). Right-click the OmniPass system tray icon and select Remember Password from the submenu. The Windows arrow cursor will change to a golden key OmniPass cursor. Click the OmniPass cursor in the login prompt area, but dont click [Login] or [Submit]. Associating a Friendly Name After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a friendly name for this site. You should enter something that reminds you of the website, the company, or the service you are logging into. In its secure database, OmniPass associates this friendly name with this website. 109 - Introducing the Fingerprint Sensor Device Additional Settings for Remembering a Site When OmniPass prompts you to enter a friendly name you also have the opportunity to set how OmniPass authenticates you to this site. There are three effective settings for how OmniPass handles a remembered site. The default setting is Automatically click the OK or Submit button for this password protected site once the user is authenticated. With this setting, each time you navigate to this site OmniPass will prompt you for your master password or fingerprint authentication device. Once you have authenticated with OmniPass, you will automatically be logged into the site. Less secure is the option to Automatically enter this password protected site when it is activated. Do not prompt for authentication. Check the upper box to get this setting, and each time you navigate to this site OmniPass will log you into the site without prompting you to authenticate. THIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS SETTING, YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE SITE. BUT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR OMNIPASS USER LOGGED IN, ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN AUTOMATIC ACCESS. If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master password or fingerprint authentication device. Once you have authenticated with OmniPass your credentials will be filled in to the site login prompt, but you will have to click the website [OK],
[Submit], or [Login] button to gain access to the site. Click Finish to complete the remember password procedure. The site location, the credentials to access the site, and the OmniPass authentication settings for the site are now stored in the OmniPass secure database. The OmniPass authentication settings (Settings for this Password Site) can always be changed in Vault Management. Logging in to a Remembered Site Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined by Settings for this Password Site and can be changed in Vault Management. 110 - Introducing the Fingerprint Sensor Device The following cases are applicable to using OmniPass to login to: Windows, remembered web sites, and all other password protected resources. With Master Password Once you return to a site you have remembered with OmniPass, you may be presented with a master password prompt. Enter your master password and you will be allowed into the site. Logging into Windows with a Fingerprint Device When logging into Windows with a fingerprint device, the fingerprint capture window will now appear next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have used Ctrl-Alt-Del/Windows button +
Power button to lock a system, and the fingerprint device can be used to log back in as stated above. IF A MACHINE IS LOCKED AND OMNIPASS DETECTS A DIFFERENT USER LOGGING BACK IN WITH A FINGERPRINT, THE FIRST USER WILL BE LOGGED OUT AND THE SECOND USER LOGGED IN. Password Management OmniPass provides an interface that lets you manage your passwords. To access this GUI, double-click the OmniPass key in the system tray. Click Vault Management; you will be prompted to authenticate. Once you gain access to Vault Management, click Manage Passwords under Vault Settings. You will see the Manage Passwords interface, with a list of friendly names. You can view the credentials stored for any remembered website by highlighting the desired resource under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under Password Protected Dialog and click Delete Page. You will be prompted to confirm the password deletion. The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or directly logs you into the remembered site. 111 - Introducing the Fingerprint Sensor Device OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember Password on an already remembered site. The exception to the above rule is when resetting the Windows password. If your password is reset in Windows, the next time you login to Windows, OmniPass will detect the password change and prompt you to Update or Reconfirm the password with OmniPass. Enter your new Windows password in the prompt and click OK. Your OmniPass "master password" will still be your Windows password. OmniPass User Identities Identities allow OmniPass users to have multiple accounts to the same site (e.g., bob@biblomail.com and boballen@biblomail.com). If OmniPass did not provide you identities, you would be limited to remembering one account per site. To create and manage identities, double-click the OmniPass key in the system tray. Click Vault Management;
OmniPass will prompt you to authenticate. Once you gain access to Vault Management, click Manage Identities under Vault Settings. You can only manage the identities of the currently logged in OmniPass user To add a new identity, click New Identity or double-click Click here to add a new identity. Name the new identity and click [OK], then click [Apply]. You can now switch to the new identity and start remembering passwords. To delete an identity, highlight the identity you want to delete and click [Delete Identity], then [Apply]. WHEN YOU DELETE AN IDENTITY, ALL OF ITS ASSOCIATED REMEMBERED SITES AND PASSWORD PROTECTED DIALOGS ARE LOST. To set the default identity, highlight the identity you want as default and click [Set as Default]; click [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that OmniPass user. You can choose the identity with which you are logging in if you login using
"master password". 112 - Introducing the Fingerprint Sensor Device Choosing User Identity during Login To choose your identity during login, type your username in the User Name: field. Press [Tab] and see that the Domain: field self-populates. Click the Password: field to bring the cursor to it, and you will see the pull-down menu in the Identity: field. Select the identity to login as, then click OK. Switch User Identity To switch identities at any time, right-click the OmniPass system tray icon and click Switch User Identity from the submenu. The Switch Identity dialog will appear. Select the desired identity and then click OK. Identities and Password Management On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center, there is a pull-
down selection box labeled, Identity. This field lets you choose which identity you are managing passwords for. When you select an identity here, only those password protected dialogs that are associated with that identity are shown. You can perform all the functions explained in Password Management on page 111. Configuring OmniPass This section gives an overview of both the Export/Import function and the OmniPass Control Center. Exporting and Importing Users YOU CANNOT IMPORT A USER INTO OMNIPASS IF THERE ALREADY IS A USER WITH THE SAME NAME ENROLLED IN OMNIPASS. Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user. All OmniPass data for a user is backed up to a single encrypted database file. During the import process, the Windows login of the exported user is required. If the proper credentials cannot be supplied, the user profile will not be imported. 113 - Introducing the Fingerprint Sensor Device YOU SHOULD PERIODICALLY EXPORT YOUR USER PROFILE AND STORE IT IN A SAFE PLACE. IF ANYTHING HAPPENS TO YOUR SYSTEM, YOU CAN IMPORT YOUR OMNIPASS PROFILE TO A NEW SYSTEM AND HAVE ALL YOUR REMEMBERED SETTINGS AND FINGERPRINTS INSTANTLY. YOU DON'T FORGET THE WINDOWS LOGIN CREDENTIALS WHEN EXPORTING. WHEN YOU EXAMINE THE IMPORTATION, YOU ARE PROMPTED FOR AUTHENTICATION. THE CREDENTIALS THAT WILL ALLOW A USER PROFILE TO BE IMPORTED ARE THE WINDOWS LOGIN CREDENTIALS OF THE EXPORTED USER. THEY ARE THE CREDENTIALS THAT HAD TO BE SUBMITTED WHEN THE USER PROFILE WAS EXPORTED. YOU WILL NEED USER NAME, PASSWORD, AND DOMAIN. Exporting an OmniPass User Profile To export a user, open the OmniPass Control Center, and click Import/Export User under Manage Users. Click Exports an OmniPass user profile. OmniPass will prompt you to authenticate. Upon successfully authentication, you must name the OmniPass user profile and decide where to save it. An .opi file is generated, and you should store a copy of it in a safe place. This .opi file contains all your user specific OmniPass data, and it is both encrypted and password protected. This user profile does NOT contain any of your encrypted data files. Importing an OmniPass User Profile To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File (*.opi) and click Next. OmniPass will then prompt you to browse for the file you had previously exported (.opi file). When you select the .opi file for importation, OmniPass will prompt you for authentication. The credentials that will allow a user profile to be imported are the Windows login credentials of the exported user. They are the credentials that had to be submitted when the user profile was exported. You will need User Name, Password, and Domain. If you dont remember the value for Domain, in a PC or SOHO environment Domain should be your computer name. OmniPass will notify you if the user was successfully imported. 114 - Introducing the Fingerprint Sensor Device Things to Know Regarding Import/Export Assume you export a local Windows User profile from OmniPass. You want to import that profile to another machine that has OmniPass. Before you can import the profile, a Windows user with the same login credentials must be created on the machine importing the profile. Example: I have a Windows user with the username Tom and the password Sunshine on my system. I have enrolled Tom into OmniPass and remembered passwords. I want to take all my passwords to new system. I export Toms OmniPass user profile. I go to my new system and using the Control Panel I create a user with the username "Tom" and the password "Sunshine". I can now successfully import the OmniPass user data to the new system. If you export an OmniPass-only user, you can import that user to any computer running OmniPass, provided that a user with that name is not already enrolled in OmniPass. If you attempt to import a user profile who has the same name as a user already enrolled in OmniPass, the OmniPass import function will fail. OmniPass Control Center This section serves to explain functions within OmniPass Control Center that werent explained earlier. You can access the OmniPass Control Center any of three ways:
Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lower-right corner of the desktop) Search for OmniPass using Windows 8 Search accessible from Charms panel (Windows button + C) Open the Windows Control Panel (accessible via Modern Start screen->[Windows]+[X] -> Control Panel) and double-click the OmniPass icon. User Management The User Management tab has two major interfaces: Add/Remove User and Import/Export User. Import/Export User functionality is documented in Exporting and Importing Users on page 113. Add/Remove User functionality is straightforward. 115 - Introducing the Fingerprint Sensor Device If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The Enrollment Wizard is documented in User Enrollment on page 106. If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate. Authenticate with the credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass will prompt you to confirm user removal. Click OK to complete user removal. REMOVING A USER WILL AUTOMATICALLY DESTROY ALL OMNIPASS DATA ASSOCIATED WITH THAT USER. ALL IDENTITIES AND CREDENTIALS ASSOCIATED WITH THE USER WILL BE LOST. IF YOURE SURE YOU WANT TO REMOVE THE USER, WE RECOMMEND YOU EXPORT THE USER PROFILE. User Settings User Settings tab has three interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings allow you to customize OmniPass to suit your preferences. Under User Settings (Audio Settings and Taskbar Tips) you can set how OmniPass notifies you of OmniPass events (e.g., successful login, access denied, etc.). Details of each setting under the Audio Settings and Taskbar Tips interfaces are self-explanatory. The Enrollment interface allows you to enroll fingerprints. For the procedure to enroll and authentication device refer to Chapter 2.3. To enroll additional fingerprints, click Enroll Authentication Device, and authenticate with OmniPass. Select the fingerprint recognition device in the Select Authentication Device screen (it should already be marked by a green check if you have a finger enrolled) and click Next. System Settings The OmniPass Startup Options interface can be found in the System Settings tab. With these options you can specify how your OmniPass Logon is tied to your Windows Logon. The first option, Automatically log on to OmniPass as the current user, will do just as it says; during Windows login, you will be logged on to OmniPass using your Windows login credentials. If the user logging into Windows was never enrolled into OmniPass, upon login no one will be logged on to OmniPass. This setting is appropriate for an office setting or any setting where users must enter a username and password to log into a computer. This is the default setting. 116 - Introducing the Fingerprint Sensor Device With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to login once you have logged on to Windows. With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to be logged on. You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log in User from the right-click menu. Troubleshooting You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings. You can do this by going to Modern Start screen->[Windows]+[X], Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand Security Options, and double-click Network Access: Sharing and Security Model for Local Accounts. The correct setting should be Classic - Local Users Authenticate as Themselves. Cannot add a User with a Blank Password to OmniPass If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust your local security settings. First attempt the procedure explained in the Cannot add Windows user to OmniPass section. If the difficulties persist, then try the following procedure. Click Modern Start screen->[Windows]+[X], Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand Security Options, and double-click Accounts: Limit local account use of blank passwords to console login only. This setting should be set to Disabled. Dialog appears after OmniPass authentication during Windows Logon After installing OmniPass on your system, you can choose to logon to Windows using OmniPass. You authenticate with OmniPass (via master password, or an enrolled security device) and OmniPass logs you into Windows. You may, during this OmniPass authentication, see a Login Error dialog box. 117 - Introducing the Fingerprint Sensor Device This dialog box occurs when OmniPass was unable to log you into Windows with the credentials supplied (username and password). This could happen for any of the following reasons:
Your Windows password has changed Your Windows account has been disabled If you are having difficulties due to the first reason, you will need to update OmniPass with your changed Windows account password. Click Update Password and you will be prompted with a dialog to reconfirm your password. Enter the new password to your Windows user account and click OK. If the error persists, then it is unlikely the problem is due to your Windows user account password changing. 118 - Introducing the Fingerprint Sensor Device Index A About This Guide 11 AC adapter 37 plug adapters 77 Active Digitizer 26 application buttons 35 Auto/Airline Adapter 37, 38 B Battery 47 care 77 cold-swapping 50 conserving power 44 dead 59 faulty 59 hot-swapping 51 increasing life 77 Lithium Polymer battery 47 problems 59, 60 recharging 48 replacing 49 shorted 49 Standby mode 49 battery release latch 17, 18 BIOS 41 Bluetooth 100 Boot Sequence 40 Built-in Speakers 57 C Cameras 15, 18, 20 Capacitive Touchscreen 30 Clicking 26 Contact Information 12 Conventions used in the guide 11 D DC input connector 19 DC Output Cable 37 Display Panel 24, 61 E Error Messages 62 F Fingerprint Sensor Device 102 enrolling a fingerprint 107 getting started 103 installing OmniPass 103 logging into a remembered site 110 OmniPass authentication toolbar 109 password replacement 108 remembering a password 109 uninstalling OmniPass 105 user enrollment 106 using OmniPass 108 Front Web Camera 15, 20 Fujitsu Contact Information 12 119 G Gestures 30 H Hard Disk Drive 57 Hard Disk Drive Passwords 40 HDMI Port 19 headphone 19 Hibernation Feature 45 L Lithium Polymer Battery 18 M Media Player 78 Mouse 57 P Pen 58 Caring for the Pen 32 Changing the Pen Battery 33 Changing the Pen Settings 32 Installing a Pen Tether 34 Replacing the Pen Tip 33 Pen Tether Attachment Point 17, 21 Power AC adapter 37 Auto/Airline adapter 37 failure 58, 59 management 44 off 46 on 39 problems 60 sources 37 power icon 23 120 Power Management 44 Power On Self Test 40, 62 Power/Suspend/Resume Switch 44 Pre-Installed Software 84 R Rear Web Camera 18 Registration 43 Regulatory Information 86 Removable battery pack 18 Restarting 46 Restoring Your Pre-installed Software 63 S SD Card installing 52 removing 53 Sleep Mode 44 Specifications 80 Audio 81 Chipset 80 Digitizer 81 Dimensions and Weight 83 Environmental Requirements 83 Keyboard 82 mass storage device options 81 Memory 80 Microprocessor 80 Power 83 Video 81 status display 22, 23 T Touch Screen calibrating 29 clicking 27 dragging 28 Troubleshooting 54 Audio Problems 57 battery 59 display 61 hard drive 57 mouse 57 power 58 USB 58 U Universal Serial Bus 19, 20 W Warranty 13 Windows 11 Windows Power Management 46 Wireless LAN Before Using the Wireless LAN 91 configuring 91 connection to the network 96 deactivating/disconnecting 94 modes 92 Specifications 99 Troubleshooting 96 121 Guide dutilisation Dcouvrez comment utiliser votre PC Tablette STYLISTIC Fujitsu Q584 Table des matires Chapitre 1 propos de ce guide . 11 Conventions utilises dans ce guide . 11 Coordonnes pour contacter Fujitsu . 12 la dcouverte de votre PC Tablette Aperu gnral. 14 Emplacement des commandes et des connecteurs . 15 lments situs lavant . 15 lments situs larrire . 17 Fonctionnalits sur le ct gauche . 19 Ct droit. 20 Tableau de voyants dtat . 22 cran . 24 Numriseur actif/cran tactile . 26 cran de numriseur actif . 26 Utilisation de lcran tactile capacitif. 30 Entretien du stylet . 32 Changement de la pile du stylet . 33 Remplacement de lembout du stylet . 33 Boutons du PC Tablette. 35 6 Chapitre 2 Chapitre 3 Chapitre 4 Guide dintroduction votre PC Tablette Sources dalimentation . 37 Connexion des adaptateurs dalimentation. 37 Dmarrage de votre PC Tablette STYLISTIC. 39 Mise sous tension . 39 Procdure damorage . 40 Mots de passe daccs au disque dur . 40 Utilitaire de configuration du BIOS . 41 Amorage du systme. 42 Premier dmarrage de Windows . 42 Gestion de lalimentation . 44 Commutateur dalimentation/veille/reprise. 44 Mode veille . 44 Mode veille prolonge (enregistrement sur le disque). 45 Gestion de lalimentation dans Windows. 46 Redmarrage du systme. 46 Mise hors tension . 47 Options installables par lutilisateur Batterie au lithium-polymre . 48 Procdure de recharge des batteries . 49 Remplacement de la batterie. 50 Cartes Secure Digital . 53 Installation dune carte SD . 53 Retrait dune carte SD . 54 Dpannage de votre PC Tablette Dpannage . 55 Identification du problme. 55 7 -
Chapitre 5 Chapitre 6 Problmes spcifiques . 57 Messages de lauto-diagnostic de mise sous tension . 65 Restauration de votre image de systme et de vos logiciels . 66 Enregistrement et restauration de vos images dorigine et de systme 66 Cration dune image de systme . 68 Restauration et Utilitaires. 73 Restauration de limage dorigine avec la fonctionnalit Restauration et Utilitaires. 76 Tlchargement des mises jour de pilotes . 77 Entretien Entretien de votre PC Tablette . 78 Nettoyage de votre PC Tablette . 79 Entreposage de votre PC Tablette . 81 Voyager avec votre PC Tablette . 81 Batteries . 82 Entretien de votre lecteur multimdia. 83 Cartes Secure Digital . 84 Spcifications techniques Spcifications . 85 Microprocesseur . 85 Puce. 85 Mmoire . 85 Vido . 86 Audio . 86 Options de mmoire de masse. 86 Communications . 87 Fonctions de scurit . 87 Ports de priphriques . 87 Alimentation . 88 8 -
Dimensions et poids . 88 Environnement dexploitation . 88 Accessoires prfrs des utilisateurs . 89 Logiciels fournis . 89 Apprendre utiliser vos logiciels . 89 Renseignements sur la rglementation . 91 Annexe A : Guide dutilisation de la carte de rseau local sans fil Avant dutiliser la carte rseau sans fil en option . 96 Cartes rseau sans fil prsentes dans ce document . 96 Caractristiques de la carte rseau sans fil . 96 Modes de rseau sans fil compatibles avec cette carte. 97 Dsactivation/dconnexion de la carte rseau sans fil . 99 Dsactivation avec le commutateur de la carte rseau sans fil . 100 Dsactivation par licne dans la zone de notification . 100 Activation de la carte rseau sans fil . 100 Configuration de la carte rseau sans fil. 101 Configuration de la carte de rseau local sans fil sous Windows . 101 Connexion au rseau . 101 Dpannage de la carte rseau sans fil. 102 Dpannage . 102 Spcifications de la carte rseau sans fil. 104 Spcifications . 104 Utilisation de Bluetooth . 105 Prsentation de Bluetooth . 105 Sources dinformations supplmentaires sur Bluetooth . 105 Annexe B : Capteur dempreintes digitales Prsentation du capteur dempreintes digitales . 107 Guide dintroduction . 108 9 -
Installation dOmniPass . 108 Enregistrement des utilisateurs . 111 Utilisation dOmniPass . 114 Configuration dOmniPass . 119 Centre de contrle OmniPass . 122 Dpannage . 124 Index . 126 10 -
Informations sur les droits dauteurs et les marques commerciales La socit Fujitsu America, Inc. sest efforce dassurer la prcision ainsi que lintgralit de ce document. Toutefois, en raison de dveloppements continus visant amliorer constamment les capacits de nos produits, les donnes contenues dans ce document reprsentent seulement les objectifs de conception de Fujitsu et ne sont donnes qu titre indicatif ; les rsultats rels peuvent varier en fonction de facteurs trs varis. Les donnes relatives ce produit ne sont pas garanties. Les spcifications sont sujettes modification sans pravis. Fujitsu et le logo Fujitsu sont des marques dposes de Fujitsu, Limited. STYLISTIC est une marque dpose de la socit Fujitsu America, Inc. Microsoft et Windows sont des marques dposes de la socit Microsoft aux tats-Unis et/ou dans dautres pays. Le logo SD a t enregistr par la socit SD-3C, LLC auprs du U.S. Patent and Trademark Office (Agence amricaine des brevets et marques de commerce) et auprs dautres agences de ce type dans le monde. AMD et Radeon sont des marques dposes ou des marques de commerce de la socit Advanced Micro Devices, Inc. OmniPass est une marque de commerce de la socit Softex, Inc. Skype est une marque de commerce de la socit Skype Limited. Broadcom est une marque dpose de la socit Broadcom. Norton Internet Security est une marque de commerce de la socit Symantec aux tats-Unis et dans dautres pays. AirPrime est une marque de commerce de la socit Sierra Wireless Inc. Gobi3000 est une marque de commerce de la socit Qualcomm Inc. Adobe et Adobe Reader sont des marques de commerce ou des marques dposes de la socit Adobe Systems Inc. aux tats-Unis et/ou dans dautres pays. Ralink est une marque dpose de la socit Ralink Technology. Bluetooth et le logo Bluetooth sont des marques dposes de la socit Bluetooth SIG, Inc. Realtek est une marque de commerce de la socit Realtek Semiconductor. Wi-Fi est une marque de commerce de la Wireless Ethernet Compatibility Alliance (WECA). Tous les autres noms de produit sont des marques de commerce ou des marques dposes de leurs propritaires respectifs. Toutes les autres marques de commerce mentionnes dans le prsent document sont la proprit de leurs dtenteurs respectifs. 2012 Fujitsu America, Incorporated. Tous droits rservs. Aucune partie de cette publication ne peut tre copie, reproduite ou traduite sans le consentement pralable de la socit Fujitsu America, Inc. Aucune partie de cette publication ne peut tre enregistre ou transmise lectroniquement sans le consentement crit pralable de la socit Fujitsu America, Inc. B5FK-0131-01ENZ0-00 GUIDE DUTILISATION POUR LA CONNEXION SANS FIL EN LARGE BANDE SI LE PRIPHRIQUE DE RSEAU TENDU SANS FIL (WWAN) OPTIONNEL EST INSTALL SUR VOTRE ORDINATEUR TABLETTE, LE GUIDE DUTILISATION CORRESPONDANT ESTDISPONIBLE SUR :
http://solutions.us.fujitsu.com/www/content/support/mobile/support_notices LA VERSION COMPLTE DU GUIDE DUTILISATION CONTIENT DES AVERTISSEMENTS ET DES MISES EN GARDE SUR LA SCURIT DES RADIOFRQUENCES LORSQUON UTILISE UN DISPOSITIF DE RSEAU TENDU SANS FIL, POUR LES CONSULTER, CLIQUEZ SUR 3G MINI-CARD GOBI3000 REGULATORY AND SAFETY INFORMATION . DCLARATION DE CONFORMIT selon la partie 15 des rgles de la FCC Nom de la partie responsable :
Adresse :
Tlphone :
Dclare que le produit :
Fujitsu America, Inc. 1250 E. Arques Avenue, Sunnyvale, CA 94085
(408) 746-6000 Configuration du modle de base : PC Tablette STYLISTIC Q584 est conforme aux exigences de la partie 15 des rgles de la FCC. Cet appareil est conforme aux exigences de la partie 15 des rgles de la FCC. Lutilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisible ; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. CONSIGNES DE SCURIT IMPORTANTES Pour fonctionner, cet appareil ncessite un adaptateur secteur. Utilisez uniquement un adaptateur de classe 2 pour quipement informatique, homologu UL I.T.E., avec une sortie nominale de 19 V c.c. et un courant de 3,16A (60 W). Polarit de sortie de ladaptateur secteur :
+
Lorsque vous utilisez votre ordinateur tablette, vous devez toujours prendre certaines prcautions de base pour viter les risques dincendie, de choc lectrique et de blessure, notamment :
ATTENTION : SURFACE CHAUDE : LE DESSOUS DE CET ORDINATEUR PEUT SCHAUFFER LORSQUE LAPPAREIL EST UTILIS PENDANT UNE LONGUE PRIODE. LORSQUE VOUS UTILISEZ CET ORDINATEUR ET QUIL REPOSE MME LA PEAU (SUR LES JAMBES NUES), PRENEZ GARDE NE PAS LUTILISER PENDANT TROP LONGTEMPS OU DE MANIRE CONTINUE. ATTENTION : IL Y A UN RISQUE DEXPLOSION SI LA BATTERIE NEST PAS REMPLACE PAR UNE BATTERIE APPROPRIE. JETEZ LES BATTERIES USES CONFORMMENT AUX INSTRUCTIONS DU FABRICANT. Nutilisez pas ce produit proximit dun point deau (baignoire, lavabo, vier de cuisine, vier de buanderie) ni dans un sous-sol humide ou ct dune piscine. Utilisez uniquement le cordon dalimentation et les piles recommands dans ce manuel. Ne jetez pas les batteries dans le feu. Elles risquent dexploser. Vrifiez si la rglementation locale comporte des instructions spciales dlimination. Avis rserv des rparateurs qualifis CONSERVEZ CES INSTRUCTIONS DANGER DEXPLOSION SI LA BATTERIE AU LITHIUM (HORLOGE) EST INCORRECTEMENT REMPLACE. LA PILE DOIT TRE REMPLACE UNIQUEMENT PAR UNE PILE IDENTIQUE OU DUN TYPE QUIVALENT RECOMMAND PAR LE FABRICANT. JETEZ LES BATTERIES USES CONFORMMENT AUX INSTRUCTIONS DU FABRICANT. POUR BNFICIER DUNE PROTECTION CONTINUE CONTRE LES RISQUES DINCENDIE, LE FUSIBLE NE DOIT TRE REMPLAC QUE PAR UN AUTRE FUSIBLE DE MME TYPE ET DE MME CAPACIT. Recyclage de la batterie Avec le temps, lautonomie des batteries qui alimentent votre ordinateur portable finira par diminuer ; cest un phnomne naturel pour toutes les batteries. Lorsque vous remarquerez cela, songez installer une batterie neuve*. Si vous remplacez votre ancienne batterie, il est important que vous la jetiez comme il convient car, dans le cas contraire, les matriaux quelle contient risquent de nuire lenvironnement. Chez Fujitsu, nous portons une attention particulire la protection de lenvironnement et nous collaborons donc avec la Rechargeable Battery Recycle Corporation (RBRC**), une organisation de service publique but non lucratif qui sengage dans la protection de lenvironnement par le recyclage des batteries usages sans cot pour vous. La RBRC dispose de dizaines de milliers de points de collecte aux tats-Unis et au Canada. Pour trouver le lieu de collecte le plus proche de chez vous, visitez www.RBRC.org ou appelez au 1-800-822-8837. Si aucun des lieux proposs par la RBRC ne vous convient, vous pouvez en trouver un en visitant le site de la Consumer Education Initiative
(Initiative pour lducation des consommateurs) de lEIA ladresse http://EIAE.org/. Rappelez-vous que la protection de lenvironnement est laffaire de tous, vous devriez donc faire tout votre possible afin dy contribuer, pour la gnration actuelle et les gnrations suivantes.
* Pour commander une nouvelle batterie compatible avec votre ordinateur portable Fujitsu, allez sur www.shopfujitsu.com (tats-Unis) ou www.fujitsu.ca/products/notebooks (Canada).
** La RBRC est une organisation indpendante dont Fujitsu finance une partie des activits de recyclage ; la RBRC nest en aucune faon affilie Fujitsu. Prface propos de ce guide Le PC Tablette STYLISTIC Q584 est un ordinateur de haute performance, fonctionnant avec un stylet, qui a t conu pour le systme dexploitation MicrosoftWindows 7 et Windows 8, dition professionnelle. Ce manuel prsente le mode demploi du PC Tablette et de ses logiciels intgrs. Le PC Tablette STYLISTIC Q584 est un systme monobloc entirement quip, dot dun cran daffichage DEL rtroclair WXGA de 10,1 pouces avec angle de vision verticale et horizontale de 160. Il est dot dune puissante interface autorisant la prise en charge de divers priphriques offerts en option. Conventions utilises dans ce guide Le texte contient plusieurs renvois vers des pages contenant des informations supplmentaires sur un sujet quelconque. Les boutons affichs lcran et les lments de menu sont indiqus en caractres gras. Exemple: Cliquez sur OK pour redmarrer le PC Tablette. LICNE DINFORMATIONS MET EN VIDENCE DES RENSEIGNEMENTS QUI VOUS AIDERONT MIEUX COMPRENDRE LE SUJET TRAIT. LICNE DE MISE EN GARDE MET EN VIDENCE DES INFORMATIONS IMPORTANTES POUR LUTILISATION SCURITAIRE DE VOTRE ORDINATEUR OU POUR LINTGRIT DE VOS FICHIERS. VEUILLEZ LIRE ATTENTIVEMENT TOUTES LES MISES EN GARDE. 11 LICNE DAVERTISSEMENT MET EN VIDENCE DES INFORMATIONS SUR DES DANGERS POUR VOUS, VOTRE PC TABLETTE OU VOS FICHIERS. VEUILLEZ LIRE ATTENTIVEMENT TOUS LES AVERTISSEMENTS. Coordonnes pour contacter Fujitsu Service et assistance Plusieurs faons soffrent vous pour contacter lquipe de service et assistance de Fujitsu :
Appel sans frais : 1-800-8FUJITSU (1-800-838-5487) Site Internet :
U.S.A. - us.fujitsu.com/solutions Canada - www.fujitsu.ca Avant de nous contacter, veuillez avoir les informations suivantes porte de main pour que notre prpos du service la clientle puisse vous venir en aide le plus rapidement possible :
Nom du produit Numro de configuration du produit Numro de srie du produit Date dachat Conditions dans lesquelles le problme est survenu Texte des messages derreur reus Types de priphriques connects, si applicable Site de vente par internet de Fujitsu Vous pouvez vous rendre sur ce site directement : www.shopfujitsu.com. 12 - propos de ce guide Maintien de la plus rcente configuration Pour vous assurer de toujours disposer des versions les plus actuelles des pilotes de votre systme, il vous est suggr dutiliser priodiquement lutilitaire de mise jour Fujitsu Software Download Manager (FSDM). Lutilitaire FSDM est votre disposition pour tlcharger les plus rcentes versions des pilotes, utilitaires et applications depuis le site dassistance Fujitsu. Si vous avez un systme dexploitation Windows 7, vous devez vous connecter au site dassistance
(http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS). Garantie limite Votre PC Tablette est accompagn dune garantie limite internationale de Fujitsu. Pour connatre les conditions gnrales et la dure de votre garantie limite, consultez la pochette de service livre avec votre tablette. 13 - propos de ce guide Chapitre 1 la dcouverte de votre PC Tablette Aperu gnral Le PC Tablette STYLISTIC Q584 est un ordinateur de haute performance, fonctionnant avec un stylet, qui a t conu pour le systme dexploitation Microsoft Windows7 et Windows8, dition professionnelle. Ce chapitre donne un aperu du PC Tablette STYLISTIC Q584 et de ses nombreuses fonctions. Figure 1. PC Tablette STYLISTIC Q584 14 Emplacement des commandes et des connecteurs Les fonctions et commandes qui vous permettront dutiliser votre PC Tablette sont prsentes et illustres danslesfigures 2 et3. Des informations plus dtailles sur ces fonctions et commandes sont donnes dans leschapitressuivants. cran Camra Web avant Haut-parleur Connecteur pour duplicateur de ports Bouton Windows Cheville de guidage du pidestal Haut-parleur DEL daccs la camra Web Capteur de lumire ambiante Figure 2. Caractristiques du PC Tablette STYLISTIC Q584 (dessous, vue du ct droit) lments situs lavant Camra Web avant La camra web HD (1280 x 720 pixels) situe lavant vous permet de transmettre sur Internet des images de vous-mme. DEL daccs la camra Web Le voyant daccs la camra web sallume lorsque la camra web est en marche. 15 - Emplacement des commandes et des connecteurs Capteur de lumire ambiante Le capteur de lumire ambiante reconnat automatiquement les conditions dclairage et ajuste la luminosit delcran de faon optimiser la longvit de la batterie. cran Le grand cran XGA de 10,1 pouces offre un angle de vision verticale et horizontale de 160 degrs. Hauts-parleurs Les haut-parleurs permettent dcouter le son manant de votre systme. Cheville de guidage du pidestal La cheville de guidage du pidestal procure un point dalignement utile lorsque vous installez le systme sur le pidestal. Bouton Windows Le bouton Windows procure un accs rapide lcran de dmarrage rapide. Connecteur pour duplicateur de ports Ce connecteur vous permet de brancher un duplicateur de ports (en option) votre ordinateur. cran Lcran HD de 10,1 pouces offre un angle de vision verticale et horizontale de 160 degrs. 16 - Emplacement des commandes et des connecteurs Fente pour carte Smartcard Camra Web arrire Loquet de verrouillage de la batterie Fente pour carte SD Loquet de dgagement de la batterie Batterie amovible Capteur dempreintes digitales Point dattache du cordon du stylet Figure 3. Caractristiques du PC Tablette STYLISTIC Q584 (vue arrire) lments situs larrire Loquet de verrouillage de la batterie Le loquet de verrouillage de la batterie est utilis avec le loquet de dgagement de la batterie pour sortir la batterie deson compartiment. Fente pour carte SD La fente pour carte Secure Digital (SD) permet dinsrer une carte mmoire pour la conservation des donnes. Cettecarte mmoire vous permet de transfrer des donnes partir de et vers une varit de priphriques numriques. Voir Cartes Secure Digital en page 53. 17 - Emplacement des commandes et des connecteurs Loquet de dgagement de la batterie Le loquet de dgagement de la batterie est utilis avec le loquet de verrouillage de la batterie pour sortir la batterie de son compartiment. Batterie au lithium-polymre amovible La batterie peut tre retire et remplace par une batterie charge. Voir Batterie au lithium-polymre en page 48. Point dattache du cordon du stylet Le point dattache du cordon permet de relier votre stylo ou stylet lordinateur pour viter de le perdre. Capteur dempreintes digitales Le capteur dempreintes digitales vous permet de mettre votre ordinateur en marche : il suffit de glisser votre doigt sur le capteur. Voir Prsentation du capteur dempreintes digitales en page 107. Camra Web arrire La camra web arrire de 5.0 mgapixels mise au point automatique permet de prendre en photo des objets situs devant vous et de partager celles-ci sur Internet. Fente pour carte Smart Card La fente rserve vous permet dinsrer une carte Smart Card sur laquelle vous pouvez enregistrer des informations importantes, telles que renseignements mdicaux ou de largent lectronique . 18 - Emplacement des commandes et des connecteurs Grilles de ventilation Connecteur USB 2.0 Prise dalimentation c.c. Figure 4. lments du PC Tablette STYLISTIC Q584, ct gauche Connecteur HDMI Prise dcouteurs Fonctionnalits sur le ct gauche Grilles de ventilation Les grilles de ventilation permettent le refroidissement correct du systme. POUR PROTGER VOTRE TABLETTE DES DOMMAGES ET OPTIMISER SES PERFORMANCES, GARDEZ TOUJOURS LES GRILLES DE VENTILATION DGAGES, PROPRES ET SANS DBRIS. IL EST POSSIBLE QUE VOUS DEVIEZ LES NETTOYER PRIODIQUEMENT, SELON LENVIRONNEMENT DANS LEQUEL VOUS UTILISEZ LORDINATEUR. NE PLACEZ PAS LA TABLETTE DANS UN ENDROIT O LES GRILLES DE VENTILATION POURRAIENT TRE OBSTRUES, NOTAMMENT DANS UN PETIT ESPACE FERM OU SUR UNE SURFACE MOLLE COMME UN LIT OU UN COUSSIN. Port USB 2.0 Ce port vous permet de connecter lordinateur PC Tablette des priphriques USB (Universal Serial Bus) compatibles avec la norme USB 2.0. Quatre ports USB supplmentaires sont situs sur le duplicateur de ports STYLISTIC en option. Connecteur entre c. c. Ce connecteur vous permet de brancher ladaptateur secteur ou ladaptateur auto. Prise de sortie audio/couteurs Cette prise vous permet de connecter des couteurs stro. Connecteur HDMI Le connecteur HDMI est conu pour tre utilis avec des priphriques numriques compatibles avec votre ordinateur, tels quune tlvision haute dfinition ou un rcepteur AV (audio-vido). 19 - Emplacement des commandes et des connecteurs Microphone intgr Bouton daugmentation du volume Microphone intgr Voyant dalimentation Voyant de charge Cordon du stylet Point dattache Connecteur USB 2.0 Commutateur dalimentation/
veille/reprise Bouton de diminution du volume Bouton de verrouillage de rotation Fente du cordon de stylet Interrupteur de communications sans fil Figure 5. lments du PC Tablette STYLISTIC Q584, ct droit Ct droit Port USB 2.0 Ce port vous permet de connecter lordinateur PC Tablette des priphriques USB (Universal Serial Bus) compatibles avec la norme USB 2.0. Quatre ports USB supplmentaires sont situs sur le duplicateur de ports STYLISTIC en option. Microphones intgrs Les micros intgrs vous permettent dintroduire de laudio analogue. Commutateur dalimentation/veille/reprise Ce commutateur vous permet dallumer le PC Tablette, de lteindre, de le mettre en mode Sommeil, en mode Veille prolonge ou de le remettre en marche, ceci afin dconomiser lautonomie de la batterie. Voir Dmarrage de votre PC Tablette STYLISTIC en page 39. Boutons daugmentation/diminution du volume Ils vous permettent de contrler le volume de la tablette. 20 - Emplacement des commandes et des connecteurs Voyants de charge et dalimentation Ces voyants indiquent ltat de fonctionnement et de charge des batteries du PC Tablette. Voir Tableau de voyants dtat en page 22. Point dattache du cordon du stylet Le point dattache du cordon permet de relier votre stylo ou stylet lordinateur pour viter de le perdre. Fente du cordon de stylet La fente de fixation du stylet permet dinstaller un porte-stylet optionnel pour y dposer votre stylet. Interrupteur de communications sans fil Ce commutateur permet dactiver/dsactiver les dispositifs WLAN (rseau local sans fil), WWAN (rseau sans fil tendu) et Bluetooth en option. Pour prolonger la longvit de la batterie, teignez ces priphriques entre les utilisations. Bouton de verrouillage de rotation Le bouton de verrouillage de la rotation permet de dsactiver/ractiver la rotation automatique. Lorsque la fonction de rotation automatique est ractive, lcran pivote automatiquement la moindre rotation du systme. Lorsque la rotation automatique est dsactive, lcran reste en position quels que soient les mouvements de lordinateur. 21 - Emplacement des commandes et des connecteurs Tableau de voyants dtat Les icnes apparaissant sous chacun des voyants dtat dans la zone dtat indiquent ltat du fonctionnement et leniveau de charge des batteries. Lemplacement des icnes dans la zone dtat est illustre Figure 6. Le tableau 1 explique la manire dont les voyants associs aux icnes individuelles sont affichs et dcrit la signification des diffrents affichages. (Si une icne ne saffiche pas, cela signifie que la fonction associe est teinte ou dsactive.) Voyant dalimentation batterie/entre c.c. Figure 6. Icnes de la zone dtat 22 - Tableau de voyants dtat Dans le tableau suivant, un voyant clignote une fois par seconde ; un voyant clignotant lentement sallume une fois toutes les cinq secondes. Tableau 1. Conditions de la zone dtat Mode/tat tat du voyant Remarques Icne Voyant Sous tension Mode dinactivit Sommeil Bleu continu Bleu clignotant Hors tension teint Veille prolonge Sous tension Mode dinactivit Sommeil Vert Orange Niveau de charge/entre c.c. Veille prolonge Vert clignotant Hors tension Orange clignotant teint Le systme est allum et prt tre utilis. Le systme est en mode Veille, les paramtres actifs sont enregistrs dans la mmoire vive. Le systme est en mode Veille, les paramtres et donnes sont enregistrs sur le disque dur. Ladaptateur secteur et la batterie sont disponibles, et la batterie est charge entre 50 et 100 %. Ladaptateur secteur et la batterie sont disponibles, et la batterie est charge moins de 50 %. Lordinateur est en mode Veille, ladaptateur secteur et la batterie sont disponibles, et la batterie est charge entre 50et 100 %. Lordinateur est en mode Veille, ladaptateur secteur et la batterie sont disponibles, et la batterie est charge moins de 50 %. Ladaptateur secteur nest pas branch. 23 - Tableau de voyants dtat Figure 7. cran du PC Tablette cran Votre PC Tablette STYLISTIC Q584 est dot dun cran daffichage DEL rtroclair vous permettant de mieux voir son contenu lorsque la lumire environnante est intense. La ligne svelte de votre PC Tablette vous permet de le manipuler facilement et de le tourner 90, 180, ou 270 dans toutes les directions. Cet cran peut tre utilis comme tablette, de la mme faon quun bloc de papier. Rglage de la luminosit de lcran Pour rgler la luminosit avec lutilitaire de gestion de lalimentation :
Allez lcran de dmarrage moderne, appuyez sur [Windows]+[X], puis slectionnez Panneau de configuration. Dans Affichage par : , slectionnez un des affichages par icnes. Slectionnez Affichage, puis cliquez sur Rgler la luminosit dans la partie gauche de lcran. Sous Slectionner ou personnalisez un rgime dalimentation, choisissez le rgime que vous souhaitez. Faites glisser la barre Luminosit de lcran : (au bas de la fentre) vers la gauche ou la droite selon votre prfrence. 24 - cran Comment tenir le PC Tablette Lordinateur STYLISTIC Q584 peut tre tenu de quatre faons diffrentes, que vous pouvez choisir selon vos besoins du moment. Vous pouvez donc choisir lorientation horizontale primaire ou secondaire, ou encore lorientation verticale primaire ou secondaire. (Les dsignations dorientation sont conformes celles utilises dans lutilitaire de boutons.) Lillustration ci-dessous indique lordre des rotations lorsque vous faites pivoter le systme avec le bouton de rotation. Orientation horizontale primaire Orientation verticale secondaire Orientation horizontale secondaire Orientation verticale primaire 25 - cran Numriseur actif/cran tactile cran de numriseur actif Le numriseur intgr vous permet dutiliser le stylet comme un pointeur. (Pour de plus amples informations sur lentretien du stylet, voir Entretien du stylet on page 32.) Vous pouvez utiliser le stylet pour cliquer, double-cliquer, faire glisser des lments ou icnes ou pour dessiner comme avec un stylo ou un crayon dans des applications qui fonctionnent avec cette caractristique, notamment des programmes de dessin et de peinture. Pour de plus amples informations, consultez la documentation accompagnant votre application. Figure 8. Utilisation de lcran numriseur LORSQUE VOUS TOUCHEZ LCRAN AVEC LE DOIGT ET LORSQUE VOUS CRIVEZ AVEC LE STYLET, NUTILISEZ PAS DE FORCE EXCESSIVE. DANS LE CAS CONTRAIRE, VOUS RISQUEZ DENDOMMAGER LCRAN DEL ET/OU LCRAN TACTILE. POUR ACHETER DES STYLETS SUPPLMENTAIRES OU DE REMPLACEMENT, VISITEZ LE SITE INTERNET DES ACCESSOIRES DE FUJITSU :
WWW.SHOPFUJITSU.COM. 26 - Numriseur actif/cran tactile Cliquer sur lcran numriseur actif Pour faire un clic gauche, touchez lobjet que vous voulez slectionner, puis soulevez immdiatement lebout du stylet. Figure 9. Cliquer sur lcran numriseur actif Figure 10. Faire un clic droit sur lcran numriseur Faire un clic droit sur lcran numriseur Pour faire un clic droit, maintenez le bouton sur le devant dustylet enfonc en tapotant sur lcran. Pour changer lesparamtres pour la fonction de clic droite, allez lcran de dmarrage moderne->[Windows]+[X]-> Panneau de configuration -> Paramtres tactiles et du stylet. Dans longlet des Options de stylet, slectionnez Appuyer et maintenir , puis cliquez sur le bouton [Paramtres]. 27 - Numriseur actif/cran tactile Double-cliquer Pour double-cliquer, touchez llment deux fois, puis retirez immdiatement le bout du stylet. Figure 11. Faire un double clic sur lcran Glisser Glisser signifie dplacer un lment avec le stylet en touchant lcran, puis en dplaant et en soulevant le stylet. Pour glisser, touchez lcran tactile avec votre stylet sur llment que vous souhaitez dplacer. Tout en continuant de toucher lcran avec le stylet, glissez llment vers son nouvel emplacement en dplaant le stylet travers lcran, puisen soulevant le stylet pour le relcher. Figure 12. Faire glisser un objet sur lcran 28 - Numriseur actif/cran tactile talonner lcran Pour assurer une correspondance prcise entre le curseur et le stylet, vous devez excuter lUtilitaire dtalonnage de lcran tactile avant dutiliser lcran tactile pour la premire fois. Faites de mme si vous avez modifi la rsolution de lcran et/ou lorientation. Pour excuter lutilitaire dtalonnage :
1 Allez lcran de dmarrage moderne -> [Windows]+[X] -> Panneau de configuration. 2 Double-cliquez sur licne Paramtres PC Tablette, puis slectionnez longlet Ecran. 3 Cliquez sur le bouton [talonner], puis slectionnez la fonction talonner : stylet ou tactile. 4 Rglez lcran de votre portable un angle confortable, puis reprez le symbole (+) dans le coin suprieur gauche de lcran. LORSQUE VOUS TAPOTEZ SUR LCRAN PENDANT LTALONNAGE, NUTILISEZ PAS DE FORCE EXCESSIVE. DANS LE CAS CONTRAIRE, VOUS RISQUEZ DENDOMMAGER LCRAN DEL ET/OU LCRAN TACTILE. 5 A laide du stylet ou de votre doigt (selon la fonction que vous avez choisi dtalonner), touchez fermement lcran directement sur le symbole (+). Soulevez le stylet de lcran et la cible se dplacera vers une position diffrente sur lcran. 6 Rptez ltape 5 jusqu ce que vous ayez slectionn tous les symboles (+). 7 Une fois cette opration termine, appuyez sur le bouton [OK]. 8 Touchez le stylet sur plusieurs points de lcran pour vrifier quil est bien talonn. Si vous ntes pas satisfait deltalonnage de lcran, appuyez sur le bouton [talonner] pour recommencer. 29 - Numriseur actif/cran tactile Utilisation de lcran tactile capacitif Certaines configurations de ce PC Tablette comportent un numriseur double optionnel permettant dutiliser le stylet ou un doigt comme pointeur. Ce type dcran permet galement dutiliser des mouvements pour excuter diverses oprations, notamment pour dfiler, zoomer et pivoter. LA RECONNAISSANCE DES MOUVEMENTS EST ACTIVE SUIVANT LAPPLICATION UTILISE. LE STYLET EST PRIORITAIRE PAR RAPPORT LA COMMUNICATION TACTILE. SI LE STYLET SE TROUVE DANS LE RAYON DACTION DE LCRAN, LA COMMUNICATION TACTILE EST DSACTIVE. LORSQUE LUTILISATEUR POSE UN DOIGT SUR LCRAN TACTILE, CE DERNIER RAGIT COMME SI LE STYLET TAIT UTILIS. Faire un clic droit sur lcran tactile Pour excuter un clic droit avec deux doigts, placez un doigt lendroit o vous dsirez excuter le clic droit, puis tapotez rapidement une fois sur lcran. Mode mouvements Pour activer le mode mouvements, deux doigts doivent toucher lcran avec un intervalle de moins de 200 ms. Si le deuxime doigt touche lcran plus de 200 ms aprs le premier doigt, le deuxime doigt est ignor. Si plus de deux doigts touchent lcran pendant cet instant, cest plutt le mode mouvements avanc qui est activ. Lorsque le mode mouvements est activ, aucun mouvement de curseur nest envoy au systme. Lorsque les deux doigts quittent lcran tactile, le mode mouvements est dsactiv. Lorsquun troisime doigt est ajout, le mode mouvements normal est dsactiv au profit du mode mouvements avanc. Si le systme ne reconnat pas un mouvement, aucune opration nest excute. Dans ce cas, retirez les deux doigts de lcran et essayez de nouveau. Mouvement de dfilement Pour faire dfiler un long document ou une page Web, placez deux doigts sur lcran (un premier doigt rapidement suivi du deuxime). Si au moins un des doigts se dplace dau moins 3 mm, un dfilement est produit. Si les deux doigts se dplacent dans la mme direction de faon parallle (avec une tolrance de 5 mm), le mode dfilement est activ. Si un doigt demeure immobile, aucun dfilement nest produit. Si un des deux doigts est lev, le mode dfilement est dsactiv. Mouvement de zoom Le mouvement de zoom est particulirement utile pour voir des images. Pour faire un zoom avant, placez deux doigts sur llment que vous dsirez agrandir (posez un premier doigt rapidement suivi du deuxime), puis cartez-les lun de lautre. 30 - Numriseur actif/cran tactile Si au moins un des doigts se dplace dau moins 10 mm, un zoom est produit. Si la distance entre les doigts change de10 mm ou plus et que les deux doigts sont demeurs peu prs aligns, le mode zoom est activ. Si un des deuxdoigts scarte de plus de 10 mm de la ligne de zoom cre lors du contact initial des doigts, le mode zoomestdsactiv. Pour faire un zoom arrire, placez deux doigts sur llment que vous dsirez rduire (posez un premier doigt rapidement suivi du deuxime), puis dplacez-les lun vers lautre. Mouvement de rotation Si vous dsirez faire pivoter un objet sur lcran, placez deux doigts sur limage que vous dsirez faire pivoter (posezun premier doigt rapidement suivi du deuxime), puis dplacez-les en sens contraire, comme pour tourner une poigne. La direction du pivotement de lobjet dpend de la direction du mouvement des doigts. Si au moins un des doigts se dplace dau moins 12 mm, une rotation est produite. Si un doigt demeure immobile
(se dplaant de moins de 5 mm dans nimporte quelle direction) et que lautre est dplac, une rotation est produite. Si les doigts commencent se dplacer dans la mme direction, la rotation est annule. Si la distance entre les doigts change de plus de 10 mm, la rotation est annule. 31 - Numriseur actif/cran tactile Entretien du stylet UTILISEZ UNIQUEMENT LE STYLET FOURNI AVEC VOTRE PC TABLETTE. NUTILISEZ PAS DE STYLETS DIFFRENTS : ILS NONT PAS T CONUS SPCIALEMENT POUR TRE UTILISS AVEC VOTRE ORDINATEUR PORTABLE. REMPLACEZ LEMBOUT DU STYLET SIL EST US. LA GARANTIE NE COUVRE PAS LES GRATIGNURES SUR LCRAN. LORSQUE VOUS CRIVEZ QUELQUE CHOSE, PRENEZ GARDE NE PAS GRATIGNER LA SURFACE DE LCRAN (EX. AVEC UNE MONTRE OU UN BRACELET). LE STYLET DE LORDINATEUR EST UN INSTRUMENT LECTRONIQUE QUI PEUT TRE ENDOMMAG EN CAS DUTILISATION NON CONFORME. IL CONVIENT DE LE MANIPULER AVEC PRCAUTION. LA LISTE SUIVANTE DONNE DES INDICATIONS SUR LA FAON DE BIEN UTILISER LE STYLET :
NE FAITES PAS DE GRANDS MOUVEMENTS AVEC LE STYLET ET NE LUTILISEZ PAS COMME POINTEUR. NE LUTILISEZ JAMAIS SUR UNE SURFACE AUTRE QUE CELLE DE LCRAN DE VOTRE ORDINATEUR. NESSAYEZ PAS DE FAIRE TOURNER LA ZONE DE MAINTIEN PAR LE POUCE. NE STOCKEZ JAMAIS LE STYLET DE MANIRE CE QUE LEMBOUT SUPPORTE LE POIDS DU STYLET. SI VOUS ENTREPOSEZ LE STYLET DE CETTE FAON, LES MCANISMES INTERNES RISQUENT DTRE ENDOMMAGS (SURTOUT SI LA TEMPRATURE EST LEVE). DANS CE CAS, LE STYLET PEUT RAGIR COMME SI LEMBOUT TAIT CONSTAMMENT ENFONC. LE STYLET PEUT SUBIR LINFLUENCE DES CHAMPS LECTROMAGNTIQUES (VIBRATIONS ET TRESSAUTEMENTS DU CURSEUR). IL SE PEUT QUE LE CURSEUR VIBRE LGREMENT DANS CERTAINES ZONES DE LCRAN MME SI LON APPUIE FERMEMENT SUR LE STYLET. Modification des paramtres du stylet Vous pouvez oprer quelques changements dans les paramtres du stylet pour ladapter vos besoins (changement de la sensibilit la pression, notamment) Pour ce faire, allez lcran de dmarrage moderne->[Windows]+[X]-> Panneau de configuration, puis slectionnez un des affichages dans la zone Page daccueil du Panneau de configuration : . Cliquez sur licne Stylet et priphriques dentre , la fentre des paramtres saffichera alors. 32 - Numriseur actif/cran tactile Changement de la pile du stylet NE RETIREZ PAS LEMBOUT DU STYLET POUR ACCDER LA PILE, RETIREZ UNIQUEMENT LE CAPUCHON LARRIRE DU STYLET. IL Y A UN RISQUE DEXPLOSION SI LA PILE EST REMPLACE PAR UNE PILE DONT LE TYPE NE CORRESPOND PAS. JETEZ LES PILES USAGES CONFORMMENT AUX PROCDURES LOCALES. Capuchon du stylet Le stylet fonctionne avec une pile AAAA. Avant de commencer, assurez-vous davoir disposition une pile neuve. 1 Retirez le capuchon larrire du stylet (Figure 13). 2 Retirez la pile du fourreau. 3 Insrez la pile neuve dans le fourreau dans le mme sens que celle qui y tait auparavant. 4 Refermez le capuchon. Remplacement de lembout du stylet Avec le temps, il se peut que lembout du stylet suse ou que des particules trangres sy attachent, risquant de rayer lcran. Une fois abm, lembout sera difficile manipuler et lcran ragira de manire imprvue. Si un problme de ce genre se produit, remplacez lembout du stylet. 1 Avec loutil dextraction dembout de stylet inclus dans la bote de votre systme, pincez lembout du stylet et retirez-le du cylindre. 2 En vous aidant dun des nouveaux conseils fournis avec votre stylet, insrez lextrmit pointue de lembout dans le fourreau et enfoncez-la fermement pour la mettre en place. 33 - Numriseur actif/cran tactile Fourreau du stylet Pile AAAA Figure 13. Remplacement de la batterie Embout du stylet Outil de retrait de lembout du stylet Figure 14. Remplacement de lembout du stylet Installation du cordon Pour viter dchapper ou de perdre votre stylo, attachez-le votre ordinateur laide du cordon fourni. Pour attacher le cordon votre PC Tablette, suivez les tapes suivantes :
1 Attachez lextrmit du cordon (petite boucle) votre stylet. Pour ce faire, enfilez la petite boucle travers letrou du stylo, puis faites passer lautre extrmit ducordon travers la boucle. 2 Attachez la grande boucle du cordon au point dattache de votre ordinateur. Pour ce faire, enfilez le bout du cordon (grande boucle) travers le point dattache, puis faites passer le stylo travers la grande boucle. Figure 15. Installation du cordon 34 - Numriseur actif/cran tactile Boutons du PC Tablette Les trois boutons de la Tablette sont situs sur le ct droit de lordinateur lorsque celui-ci est lhorizontale. Le bouton de Windows se trouve au centre en bas de lcran Bouton Windows Bouton de diminution du volume Bouton daugmentation du volume Rotation Bouton de verrouillage Figure 16. Boutons dapplications Nom du bouton Fonction Primaire
(Appuyer) Action Press at Splash Screen*
(Pression lcran de dmarrage initial) Bouton de diminution du volume Diminution du volume ouvre la configuration du BIOS Dans lutilitaire de configuration du BIOS est utilis comme touche Bas dans la configuration du BIOS Description Lorsque vous appuyez sur le bouton Diminution du volume, vous rduisez le volume. Le systme ouvre lutilitaire de la configuration du BIOS au dmarrage. Le BIOS tant ouvert, il peut tre utilis pour dplacer le curseur vers le bas. 35 - Boutons du PC Tablette Nom du bouton Fonction Primaire
(Appuyer) Action Press at Splash Screen*
(Pression lcran de dmarrage initial) Bouton daugmentation du volume Augmentation du volume Aucune Il permet galement douvrir le menu damorage Bouton de verrouillage de rotation Bouton Windows Ce bouton permet dactiver ou dsactiver la rotation automatique Ouvre lcran de dmarrage moderne/Ctrl+Alt+Suppr lorsquil est enfonc enmme temps que le bouton dalimentation Aucune Aucune Dans lutilitaire de configuration du BIOS est utilis comme touche Haut dans la configuration du BIOS Aucune Description Lorsque vous appuyez sur le bouton Augmentation du volume, vous augmentez le bouton. Lorsque le BIOS est ouvert, il peut tre utilis pour dplacer le curseur vers le haut. Lorsque vous appuyez sur ce bouton et le maintenez enfonc, vous activez ou dsactivez la fonction de rotation automatique. Il ouvre galement le menu dAmorage lorsque vous lappuyer lors du dmarrage du systme. En postconnexion, le bouton Windows sert activer deux fonctions. Lorsquil est utilis seul, il ouvre lcran de dmarrage moderne. Lorsque vous appuyez sur ce bouton en mme temps que sur le bouton dalimentation, il ouvre le gestionnaire des tches [Ctrl] + [Alt] + [Suppr].
* Laction Press at Splash Screen dsigne laction qui se produit quand vous appuyez sur le bouton lorsque le logo Fujitsu apparat au premier dmarrage de lordinateur. 36 - Boutons du PC Tablette Chapitre 2 Guide dintroduction votre PC Tablette Sources dalimentation Votre PC Tablette STYLISTIC Fujitsu peut utiliser trois sources dalimentation diffrentes : une batterie au lithium-
polymre principale, un adaptateur secteur et un adaptateur auto/avion. Connexion des adaptateurs dalimentation Ladaptateur secteur et ladaptateur auto/avion disponible en option permettent tous deux de faire fonctionner votre PC Tablette et de charger les batteries. Connexion de ladaptateur secteur 1 Branchez le cble de sortie c.c. dans la prise dalimentation c.c. de votre PC Tablette STYLISTIC. 2 Branchez ladaptateur secteur sur une prise lectrique secteur (c.a.). Connexion de ladaptateur auto/avion disponible en option 1 Branchez le cble de sortie c.c. sur la prise dalimentation c.c. de votre ordinateur. 2 Branchez ladaptateur auto/avion dans lallume-cigare dune automobile, ou, 3 Branchez ladaptateur auto/avion sur la prise dalimentation c.c. de votre sige davion. 37 Adaptateur secteur Prise dalimentation c.c. Figure 17. Connexion de ladaptateur secteur Passer dune alimentation sur adaptateur secteur ou auto/avion une alimentation sur batterie 1 Assurez-vous quau moins une batterie charge est installe dans votre ordinateur. 2 Dbranchez ladaptateur secteur ou ladaptateur auto/avion. LORSQUE VOUS RECEVEZ VOTRE NOUVEL ORDINATEUR, LA BATTERIE AU LITHIUM-POLYMRE NEST PAS CHARGE. LORS DE LA PREMIRE UTILISATION DE VOTRE ORDINATEUR, VOUS DEVEZ CONNECTER LADAPTATEUR SECTEUR OU LADAPTATEUR AUTO/AVION. 38 - Sources dalimentation Dmarrage de votre PC Tablette STYLISTIC Mise sous tension Commutateur dalimentation/veille/reprise Lorsque votre PC Tablette STYLISTIC est teint, le bouton dalimentation/veille/reprise permet de lallumer. Pour allumer votre PC Tablette, vous devez avoir connect votre adaptateur secteur ou disposer dune batterie au lithium-polymre charge. LORSQUE VOUS ALLUMEZ VOTRE PC TABLETTE STYLISTIC, ASSUREZ-VOUS DAVOIR UNE SOURCE DALIMENTATION. VOUS DEVEZ DONC AVOIR AU MOINS UNE BATTERIE INSTALLE ET CHARGE OU AVOIR BRANCH LADAPTATEUR SECTEUR OU LADAPTATEUR AUTO/AVION UNE PRISE SOUS TENSION. Pour allumer le PC Tablette STYLISTIC lorsquil est compltement teint, appuyez sur le bouton dalimentation/veille/
reprise situ en haut droite du clavier. Lorsque vous avez termin dutiliser votre PC Tablette, vous pouvez soit le mettre en mode veille (sommeil), soit lteindre compltement. Voir Mode veille en page 44 et Mise hors tension en page 47. Figure 18. Commutateur dalimentation/veille/reprise 39 - Dmarrage de votre PC Tablette STYLISTIC Lorsque vous allumez votre ordinateur STYLISTIC, ce dernier excute un auto-test de mise sous tension pour vrifier les composants internes et la configuration. Si une anomalie est dcouverte, votre PC Tablette STYLISTIC met un avertissement audio et/ou affiche un message derreur. Voir Messages de lauto-diagnostic de mise sous tension en page 65. Selon la nature du problme, vous pourrez poursuivre le dmarrage du systme dexploitation ou vous devrez ouvrir lutilitaire de configuration du BIOS pour corriger certains paramtres. Une fois les diagnostics termins, le PC Tablette charge le systme dexploitation. VOUS NE DEVEZ JAMAIS TEINDRE VOTRE PC TABLETTE STYLISTIC DURANT LAUTO-TEST DE MISE SOUS TENSION. AUTREMENT, LA PROCHAINE FOIS QUE VOUS ALLUMEREZ LORDINATEUR, CE DERNIER AFFICHERA UN MESSAGE DERREUR. Voir Messages de lauto-diagnostic de mise sous tension en page 65. Procdure damorage La procdure de dmarrage du PC Tablette invoque une procdure damorage qui fait dabord appel au BIOS. La premire fois que lordinateur STYLISTIC est allum, la mmoire principale du systme est vide et doit trouver les instructions de dmarrage de lordinateur. Ces informations se trouvent dans le programme BIOS. Chaque fois que vous dmarrez ou redmarrez votre PC Tablette, il excute une procdure damorage et lcran affiche le logo Fujitsu jusqu ce que le systme dexploitation soit charg. Durant lamorage, votre systme excute une procdure damorage standard y compris un auto-test de mise sous tension. Si la procdure damorage est excute sans chec et sans demande daccs lutilitaire de configuration du BIOS, le message de bienvenue du systme dexploitation saffiche. La procdure damorage est excute lorsque :
Vous allumez votre PC Tablette STYLISTIC. Vous redmarrez le PC Tablette partir de la bote de dialogue darrt de Windows. Un logiciel lance un redmarrage du systme. Exemple : Lorsque vous installez une nouvelle application. Mots de passe daccs au disque dur Pour mieux scuriser vos donnes, vous pouvez crer des mots de passe contrlant laccs au(x) disque(s) dur(s). Cette fonction est gre par lutilitaire de configuration BIOS. Pour savoir comment procder, reportez-vous la section Utilitaire de configuration du BIOS ci-aprs. 40 - Dmarrage de votre PC Tablette STYLISTIC RETENEZ BIEN VOS MOTS DE PASSE. SI VOUS CONFIGUREZ DES MOTS DE PASSE DE MATRE ET DUTILISATEUR, PUIS QUE VOUS LES OUBLIEZ, FUJITSU NE POURRA PAS RINITIALISER VOTRE SYSTME. VOUS RISQUERIEZ ALORS DE PERDRE DES DONNES ET DE DEVOIR REMPLACER VOTRE CARTE SYSTME OU VOTRE DISQUE DUR. Utilitaire de configuration du BIOS Lutilitaire de configuration du BIOS est un programme qui dfinit lenvironnement de fonctionnement de votre PC Tablette STYLISTIC. Votre BIOS a t configur en usine pour des conditions dutilisation normales. Vous ne devriez donc pas avoir configurer ni modifier votre environnement BIOS pour utiliser lordinateur. Lutilitaire de configuration du BIOS permet de configurer :
Les paramtres de commande des priphriques, notamment les adresses dentre-sortie et les lecteurs de dmarrage. Les paramtres de scurit des donnes du systme, ce qui comprend notamment les mots de passe. Entre dans lutilitaire de configuration du BIOS Pour ouvrir lutilitaire de configuration du BIOS, excutez les oprations suivantes :
1 Allumez ou redmarrez votre PC Tablette STYLISTIC. 2 Pour entrer dans lutilitaire, appuyez sur le bouton Rotation (ou sur la touche [F2] si vous avez un clavier externe) lorsque le logo Fujitsu apparat lcran. Le menu principal de lutilitaire de configuration du BIOS saffichera avec les paramtres courants. 3 Avec la [TOUCHE FLCHE DROITE] ou la [TOUCHE FLCHE GAUCHE], parcourez les autres menus de configuration et vrifiez/modifiez les paramtres actuels. Guide dinformation sur le BIOS Un guide dinformation sur le BIOS de votre ordinateur portable est disponible en ligne. Veuillez visiter notre site de service aprs vente et dassistance en ligne http://www.computers.us.fujitsu.com/support, puis, sous Online Support (Assistance en ligne), slectionnez Users Guides (Guides dutilisation). Slectionnez votre produit, sa srie et son modle, puis cliquez sur [Go]. Sous longlet Manuals (Manuels), slectionnez BIOS Guide (Guide du BIOS). 41 - Dmarrage de votre PC Tablette STYLISTIC Amorage du systme Il est fortement recommand de ne pas installer de priphrique externe avant que la procdure de dmarrage ne soit entirement termine. La premire fois que vous allumez votre PC Tablette, lcran affiche le logo Fujitsu. Si vous nintervenez pas, lordinateur charge le systme dexploitation et lance la procdure douverture Windows. Premier dmarrage de Windows La premire fois que vous faites dmarrer le systme et que vous suivez les instructions lcran, vous voyez apparatre une fentre douverture de session vous demandant votre nom dutilisateur. Aprs louverture de session, il faut moins dune minute lordinateur pour amorcer Windows. Pendant cette procdure, vous voyez une barre de progression et des messages interactifs. Lors du premier dmarrage, vous devrez lire et accepter les contrats de licence dutilisation de Microsoft et Fujitsu. VOUS NE POURREZ LUTILISER QUE SI VOUS ACCEPTEZ LE CONTRAT DE LICENCE. SI VOUS NALLEZ PAS AU BOUT DE CETTE PROCDURE, VOTRE ORDINATEUR RETOURNE LCRAN DE BIENVENUE WINDOWS, MME SI VOUS ESSAYEZ DTEINDRE LORDINATEUR ET DE LE REDMARRER. Aprs la premire procdure damorage, vous verrez apparatre lcran de dmarrage moderne. Certains raccourcis pouvant vous tre utiles : Appuyez sur les touches Windows + D pour faire apparatre le bureau Windows traditionnel. Appuyez sur les touches Windows + M si vous dsirez charger le bureau Windows traditionnel et rduire toutes les applications. Installer des applications en prime Aprs le premier dmarrage de votre systme, une icne Applications en prime saffiche sur votre bureau Windows. Cliquez sur cette icne et vous verrez une liste dapplications supplmentaires pouvant tre installes. Vous pouvez galement accder lutilitaire Bonus Apps en ouvrant le tableau Icnes sur lcran de dmarrage moderne et en cherchant Bonus Apps . Les applications dj installes sont affiches en gris et celles que vous pouvez installer sont affiches en bleu. Pour slectionner une application que vous dsirez installer, cochez la case de choix ct de lapplication ou cliquez sur [Slectionner tout] si vous dsirez installer toutes les applications disponibles. Lorsque vous avez fait vos choix, cliquez sur [Installer]. 42 - Dmarrage de votre PC Tablette STYLISTIC Veuillez prendre note que dans certains cas (selon les applications slectionnes), il est possible que vous deviez redmarrer le systme aprs linstallation des applications. Si vous demandez linstallation de plusieurs applications et que lune delles ncessite un redmarrage du systme, le redmarrage est excut immdiatement et les applications restantes sont ensuite installes. Enregistrement de votre LIFEBOOK chez Fujitsu Pour enregistrer votre ordinateur LIFEBOOK, vous pouvez aller sur notre site Internet : http://www.us.fujitsu.com/computers. Pour vous enregistrer en ligne, vous devez avoir un compte valide auprs dun fournisseur daccs Internet. 43 - Dmarrage de votre PC Tablette STYLISTIC Gestion de lalimentation Votre PC Tablette Fujitsu STYLISTIC possde plusieurs dispositifs permettant dconomiser lnergie des batteries. Certains dentre eux sont automatiques et ne ncessitent donc aucune intervention. Cependant, dautres dpendent de paramtres que vous pouvez configurer en fonction de vos conditions dutilisation, notamment en ce qui concerne la luminosit de lcran. Les paramtres de gestion interne de lalimentation de votre PC Tablette peuvent tre configurs dans votre systme dexploitation, dans une application intgre de gestion de lalimentation ou dans lutilitaire de configuration du BIOS. Outre les dispositifs prcdents de conservation de lnergie de la batterie, dautres moyens sont votre disposition pour viter lpuisement trop rapide de votre batterie. Par exemple, vous pouvez crer un profil de conservation de lnergie appropri, mettre votre ordinateur en mode sommeil lorsquil nexcute aucune opration et vous pouvez limiter lutilisation des priphriques consommant beaucoup dnergie. linstar de tous les ordinateurs portables aliments par batterie, vous devez trouver le meilleur compromis entre performance et rendement nergtique. Commutateur dalimentation/veille/reprise Lorsque votre PC Tablette est allum, vous pouvez utiliser le commutateur dalimentation/veille/reprise pour placer manuellement votre systme en mode veille. Assurez-vous alors que le PC Tablette nest pas en train daccder des donnes, puis enfoncez et relchez immdiatement le bouton dalimentation/veille/reprise. Pour rveiller le PC Tablette lorsquil est en mode sommeil, appuyez de nouveau sur le bouton veille/reprise. Pour savoir si lordinateur est en mode veille, regardez le voyant lumineux dalimentation. Si le voyant est allum sans clignoter, lordinateur est entirement fonctionnel. Si le voyant est allum et quil clignote, lordinateur est en mode sommeil. Si le voyant est teint, lordinateur est teint ou en veille prolonge. Mode veille Lorsque le mode sommeil est activ, Windows conserve le contenu de votre mmoire de systme durant la priode dinactivit en maintenant lalimentation de certains composants critiques. Ce mode teint lunit centrale, lcran, le disque dur et tous les autres composants internes sauf ceux qui sont ncessaires pour conserver la mmoire du systme et permettre son redmarrage. 44 - Gestion de lalimentation Votre PC Tablette peut tre mis en sommeil de plusieurs faons :
En appuyant sur le bouton dalimentation/veille/reprise (si lordinateur est allum). En slectionnant Sommeil aprs avoir cliqu sur Windows + C -> Paramtres -> bouton dalimentation, puisen cliquant sur la petite flche situe en bas droite de la fentre. Lorsque le dlai dinactivit est atteint. En laissant la charge de la batterie descendre au niveau Avertissement de batterie faible. Dans ces situations, la mmoire de systme du PC Tablette enregistre gnralement le fichier sur lequel vous travaillez, des informations sur les applications ouvertes et dautres donnes ncessaires aux oprations en cours. Lorsque vous quittez le mode veille, le PC Tablette retourne ltat o vous lavez laiss. Pour reprendre lutilisation du PC Tablette, vous devez employer le bouton dalimentation/veille/reprise et vous devez disposer dune source dalimentation valide. MAIS PLUS LENTEMENT QUEN MODE DE FONCTIONNEMENT NORMAL. SI LE PC TABLETTE UTILISE LALIMENTATION PAR BATTERIE, NOUBLIEZ PAS QUE LA BATTERIE CONTINUE SE DCHARGER MME EN MODE VEILLE, SI VOUS DSACTIVEZ LE BOUTON DALIMENTATION/VEILLE/REPRISE, VOUS NE POURREZ PLUS LUTILISER POUR METTRE LE PC TABLETTE EN MODE SOMMEIL OU EN VEILLE PROLONGE (ENREGISTREMENT SUR LE DISQUE). LA FONCTION DE REPRISE DU BOUTON NE PEUT PAS TRE DSACTIVE. SI VOTRE PC TABLETTE ACCDE ACTIVEMENT DES INFORMATIONS AU MOMENT O VOUS LE METTEZ EN MODE SOMMEIL OU EN MODE VEILLE PROLONGE, LES MODIFICATIONS AUX FICHIERS OUVERTS NE SERONT PAS PERDUES. LORSQUE VOUS ACTIVEZ LE MODE SOMMEIL, LES FICHIERS SONT LAISSS OUVERTS ET LA MMOIRE DEMEURE ACTIVE. SI VOUS CHOISISSEZ LE MODE VEILLE PROLONGE, LA MMOIRE EST TRANSFRE SUR LE DISQUE DUR INTERNE. LE PRINCIPAL AVANTAGE DU MODE VEILLE PROLONGE EST QUAUCUNE NERGIE NEST NCESSAIRE POUR CONSERVER VOS DONNES. CET AVANTAGE EST PARTICULIREMENT IMPORTANT SI VOUS COMPTEZ LAISSER VOTRE PC TABLETTE EN VEILLE PENDANT DE LONGUES PRIODES. LES PRINCIPAUX INCONVNIENTS DE LA VEILLE PROLONGE SONT UNE PLUS LONGUE DURE DES PROCDURES DE MISE EN VEILLE ET DE REPRISE, AINSI QUE LA RINITIALISATION DES PRIPHRIQUES. Mode veille prolonge (enregistrement sur le disque) Le mode veille prolonge enregistre le contenu de la mmoire du systme sur le disque dur, ce qui fait partie du mode alimentation/veille/reprise. Cette fonction peut tre active et dsactive. 45 - Gestion de lalimentation Activation et dsactivation de la fonction de veille prolonge Dans la configuration par dfaut, cette fonction nest pas active. Pour activer ou dsactiver la fonction de veille prolonge, excutez les oprations suivantes :
1 Depuis lcran de dmarrage moderne, appuyez sur [Windows]+[X]. Dans le menu, slectionnez Panneau de configuration puis Options dalimentation. 2 Puis slectionnez Choisir ce que fait le bouton dalimentation ou Choisir ce que fait la fermeture du couvercle , puis faites votre slection (Ne rien faire, Sommeil, Veille prolonge ou Arrter). Gestion de lalimentation dans Windows Licne des options dalimentation disponible dans le Panneau de configuration vous permet de configurer certains paramtres de gestion de lalimentation. Par exemple, vous pouvez utiliser les Options dalimentation pour rgler les valeurs de temporisation (dlai dinactivit) afin dteindre lcran et les disques durs selon que lordinateur est aliment par batterie ou par lun des adaptateurs. Redmarrage du systme Si votre systme est allum et que vous dsirez le redmarrer, vous devez excuter les oprations suivantes :
1 Depuis lcran de dmarrage moderne, ouvrez les Icnes ([Windows]+C) ou dposez le pointeur [-] dans le coin infrieur droit de lcran) Cliquez sur [Paramtres]->[Alimentation]. 2 Dans la liste, slectionnez Redmarrer. SI VOUS ARRTEZ VOTRE ORDINATEUR SANS FERMER WINDOWS OU SI VOUS LALLUMEZ MOINS DE 10 SECONDES APRS LAVOIR ARRT, VOUS RISQUEZ DE PROVOQUER UNE ERREUR LORS DU PROCHAIN DMARRAGE DU SYSTME. 46 - Gestion de lalimentation Mise hors tension Avant de mettre lordinateur hors tension, assurez-vous que le voyant daccs au disque dur/lecteur optique est teint. Si vous arrtez lordinateur alors quun disque est en cours dutilisation, vous risquez de perdre des donnes. Pour vous assurer que lordinateur sarrte sans erreur, utilisez la procdure darrt Windows. AVANT DTEINDRE LORDINATEUR, ASSUREZ-VOUS DE FERMER TOUS LES FICHIERS ET DE QUITTER TOUS LES PROGRAMMES. SI DES FICHIERS SONT OUVERTS LORSQUE VOUS COUPEZ LALIMENTATION, VOUS PERDREZ TOUTES LES MODIFICATIONS NAYANT PAS T ENREGISTRES ET VOUS RISQUEZ DE CAUSER DES ERREURS DE DISQUE. Si vous arrtez votre systme depuis Windows, vous permettez lordinateur de terminer les oprations en cours, vous lui permettez aussi dexcuter les oprations de mise hors tension dans le bon ordre et vous vitez les risques derreur. La procdure approprie est la suivante :
Depuis lcran de dmarrage moderne, ouvrez les Icnes ([Windows]+C) ou dposez le pointeur [-] dans le coin infrieur droit de lcran), puis cliquez sur [Paramtres]->[Alimentation]. Dans la liste, slectionnez Arrter. 47 - Gestion de lalimentation Chapitre 3 Options installables par lutilisateur Batterie au lithium-polymre Votre PC Tablette STYLISTIC possde une batterie au lithium-polymre qui lui permet de fonctionner lorsque vous navez pas accs une source dalimentation externe. Cette batterie est robuste et durable, mais elle ne doit pas tre expose des tempratures extrmes, des tensions leves, des produits chimiques ou dautres situations dangereuses. Si la batterie au lithium-polymre est utilise dans les conditions suivantes, son autonomie peut en tre rduite :
Utilise des tempratures en de de 5C ou au-del de 35C (41F 95F). Les tempratures extrmes ne diminuent pas seulement lefficacit du chargement, elles risquent galement de provoquer la dtrioration de la batterie. Si vous tentez de charger une batterie sous une temprature ambiante dpassant les seuils de tolrance, vous voyez clignoter licne de charge en cours sur le tableau de voyants dtat. Lorsque vous servez dun dispositif courant lev tel quun lecteur optique externe ou un disque dur, lutilisation de ladaptateur secteur vous permettra de conserver la dure de vie de la batterie. NE LAISSEZ JAMAIS UNE BATTERIE DFECTUEUSE DANS VOTRE PC TABLETTE. ELLE POURRAIT ENDOMMAGER LADAPTATEUR SECTEUR, LADAPTATEUR AUTO/AVION DISPONIBLE EN OPTION OU LORDINATEUR LUI-MME. UNE BATTERIE ENDOMMAGE PEUT GALEMENT NUIRE AU FONCTIONNEMENT DU PC TABLETTE EN UTILISANT TOUT LE COURANT DISPONIBLE. 48 LAUTONOMIE DE LA BATTERIE DPEND DE LA LUMINOSIT DE LCRAN, DES APPLICATIONS, DES FONCTIONS, DES PARAMTRES DE GESTION DE LALIMENTATION, DE LTAT DE LA BATTERIE, AINSI QUE DAUTRES PRFRENCES DE LUTILISATEUR. LUTILISATION DU DISQUE DUR A GALEMENT UN EFFET NOTOIRE SUR LAUTONOMIE. EN OUTRE, LA CAPACIT DE CHARGE DE LA BATTERIE DIMINUE AVEC LUSAGE. SI VOTRE BATTERIE PERD RAPIDEMENT SA CHARGE, REMPLACEZ-LA PAR UNE NEUVE. IL EST POSSIBLE QUE DES LOIS FDRALES, PROVINCIALES OU LOCALES INTERDISENT DE JETER DES BATTERIES DANS LES DCHETS DOMESTIQUES. CONTRIBUEZ LA PROTECTION DE LENVIRONNEMENT ET JETEZ VOS BATTERIES USES CONFORMMENT AUX LOIS EN VIGUEUR. POUR OBTENIR DES INFORMATIONS SUR LE RECYCLAGE ET LA MISE AUX REBUTS DES VIEILLES BATTERIES, CONSULTEZ LES AUTORITS LOCALES OU PROVINCIALES COMPTENTES. SI VOUS NARRIVEZ PAS TROUVER CES INFORMATIONS, CONTACTEZ UN PRPOS DU SERVICE LA CLIENTLE AU 1-800-8FUJITSU
(1-800-838-5487). Procdure de recharge des batteries Pour connatre le niveau de charge de votre batterie principale au lithium-polymre, vrifiez le voyant de batterie dans le tableau de voyants dtat. Ce voyant change selon le niveau de charge de la batterie. La batterie au lithium-polymre peut tre recharge avec ladaptateur secteur ou avec ladaptateur auto/avion. Pour recharger une batterie, assurez-vous quelle est bien installe dans le PC Tablette STYLISTIC et connectez ladaptateur secteur ou ladaptateur auto/avion. ASSUREZ-VOUS QUE LE VOYANT DE BATTERIE EN CHARGE SUR LE TABLEAU DE VOYANTS DTAT INDIQUE BIEN LE NIVEAU DE CHARGE EN COURS. Puisque les batteries au lithium-polymre nont aucun effet de mmoire, il nest pas ncessaire de dcharger compltement votre batterie avant de la recharger. La dure de charge sera nettement plus longue si vous utilisez le PC Tablette pendant que la batterie se charge. Si vous dsirez charger la batterie le plus rapidement possible, placez votre ordinateur en mode sommeil ou teignez-le pendant que la batterie se charge. (Pour de plus amples informations sur le mode veille et la procdure darrt, reportez-vous Gestion de lalimentation en page 44). SI VOUS UTILISEZ DES PRIPHRIQUES FORTE CONSOMMATION DNERGIE OU SI VOUS ACCDEZ FRQUEMMENT AU LECTEUR OPTIQUE EXTERNE, LA BATTERIE RISQUE DE NE PAS SE CHARGER COMPLTEMENT. 49 - Batterie au lithium-polymre Batterie faible Lorsque la batterie est faible, le systme affiche un avis de batterie faible. Si vous ne prtez pas attention cet avis de batterie faible, la batterie continuera se dcharger jusqu ce quelle ne puisse plus faire fonctionner le systme. Lorsque cela se produit, le PC Tablette se place en mode sommeil. Dans un tel cas, rien ne garantit que toutes vos donnes seront sauvegardes. LORSQUE LAVIS DE BATTERIE FAIBLE APPARAT, VOUS DEVEZ ENREGISTRER TOUTES VOS DONNES ACTIVES ET PLACER VOTRE ORDINATEUR EN MODE SOMMEIL JUSQU CE QUE VOUS PUISSIEZ DISPOSER DUNE AUTRE SOURCE DALIMENTATION. VOUS DEVEZ CONNECTER LE PLUS RAPIDEMENT POSSIBLE UNE BATTERIE CHARGE, UN ADAPTATEUR SECTEUR OU UN ADAPTATEUR AUTO/AVION. LORSQUE LORDINATEUR EST EN MODE SOMMEIL, IL DOIT TOUJOURS DISPOSER DUNE BONNE SOURCE DALIMENTATION. SI VOUS RETIREZ TOUTES LES SOURCES DALIMENTATION ALORS QUE LE PC TABLETTE STYLISTIC EST EN MODE SOMMEIL, TOUTES LES DONNES NAYANT PAS T SAUVEGARDES SERONT PERDUES. Si lordinateur se place en mode veille car batterie puise , le voyant dtat apparat comme si lordinateur tait en mode sommeil normal. Lorsque le PC Tablette est en mode Veille de batterie puise, il est impossible den reprendre lutilisation avant davoir connect une source dalimentation valide provenant dun adaptateur ou dune batterie charge. Lorsque vous avez connect une alimentation valide, vous devez ensuite appuyer sur linterrupteur dalimentation/veille/
reprise pour reprendre lutilisation de lordinateur. Lorsque lordinateur est en mode veille de batterie puise, vos donnes peuvent tre sauvegardes pendant une certaine priode, mais si vous ne connectez pas rapidement une source dalimentation valide, le voyant dalimentation cesse de clignoter et steint. Vous avez alors perdu toutes les donnes nayant pas t enregistres. Ds que vous fournissez une source dalimentation, vous pouvez poursuivre lutilisation du PC Tablette pendant que la batterie se recharge. Batterie court-circuite Le tableau de voyants dtat comprend un voyant de charge indiquant le niveau de charge disponible de la batterie. Si ce voyant affiche un voyant rouge clignotant, cela signifie que la batterie est endommage : elle doit donc tre remplace pour viter quelle ne nuise dautres composants de votre PC Tablette STYLISTIC. Remplacement de la batterie Si vous achetez une batterie supplmentaire de rechange, vous pourrez remplacer la batterie principale si elle vient se dcharger compltement. Deux mthodes soffrent vous pour remplacer votre batterie : le remplacement hors tension et le remplacement sous tension. 50 - Batterie au lithium-polymre Remplacement hors tension de la batterie Pour remplacer la batterie alors que le systme est hors tension, excutez les oprations suivantes :
1 Trouvez une batterie charge, prte linstallation. 2 Excutez lune des deux tapes suivantes :
Cliquez sur licne de lutilitaire Fujitsu Battery Swap de votre bureau Windows. Suivez les instructions qui apparaissent lcran pour mettre lordinateur en Veille prolonge. Cette procdure permet de sauvegarder vos donnes et dteindre lordinateur. Vous pouvez ensuite changer la batterie. Sauvegardez vos donnes, puis teignez lordinateur. Vous pouvez ensuite changer la batterie. 3 Notez que le loquet de la batterie situ gauche est mont sur ressort mais que le loquet de droite ne lest pas. Dgagez la batterie en poussant dabord le loquet droit vers larrire, puis en poussant et en maintenant le loquet gauche (figure 19). Tout en maintenant le loquet gauche, soulevez la batterie au point de soulvement (figure 20). 4 Pour installer la batterie neuve, vrifiez dabord que le loquet droit est retir. Tout en poussant le loquet gauche vers larrire et en le maintenant ainsi, insrez la batterie neuve dans le compartiment. Bloquez la batterie en position en faisant glisser le loquet droit vers lavant. 5 Branchez ladaptateur secteur et allumez lordinateur. Point de sou Figure 19. Dverrouillage de la batterie Figure 20. Retrait de la batterie 51 - Batterie au lithium-polymre Remplacement sous tension Pour remplacer la batterie alors que le systme est sous tension, excutez les oprations suivantes :
AVANT DENLEVER LA BATTERIE, ASSUREZ-VOUS QUE LADAPTATEUR SECTEUR EST BIEN CONNECT. LORDINATEUR NE DISPOSE DAUCUNE BATTERIE TEMPORAIRE POUR FAIRE FONCTIONNER LE SYSTME DURANT LE REMPLACEMENT DE LA BATTERIE. SI VOUS NUTILISEZ PAS LADAPTATEUR SECTEUR, VOUS PERDREZ TOUTES LES DONNES NON ENREGISTRES. 1 Branchez ladaptateur secteur sur votre ordinateur, puis sur une prise lectrique sous tension. 2 Suivez les tapes 3 5 de la section Remplacement hors tension . SI LE CONNECTEUR DE LA BATTERIE AU LITHIUM-POLYMRE NEST PAS BIEN ENFONC, VOUS RISQUEZ DE NE PAS POUVOIR UTILISER LORDINATEUR OU RECHARGER LA BATTERIE. 52 - Batterie au lithium-polymre Cartes Secure Digital Votre PC Tablette STYLISTIC peut accueillir des cartes Secure Digital (SD), sur lesquelles vous pouvez stocker et transfrer des donnes vers et partir de divers dispositifs numriques. Ces cartes utilisent une architecture de mmoire flash, ce qui veut dire que vous navez pas besoin dune source dnergie pour conserver les donnes. Veuillez prendre note que les cartes SD et SDHC sont prises en charge, mais que les cartes SDXC ne sont pas compatibles. Les cartes SD permettent un stockage mobile sur plusieurs types de dispositifs, tels que des tlphones cellulaires, des systmes de positionnement mondial, des appareils photo numriques et des assistants numriques personnels. Les cartes SD transfrent les donnes rapidement et sollicitent trs peu la batterie. Carte SD Fente pour carte SD
(emplacement approximatif sur le dessous) Fente pour carte SD Carte SD Figure 21. Fente pour carte SD Accs par lavant Figure 22. Fente pour carte SD Accs par larrire Installation dune carte SD Lorsque vous tenez le PC Tablette en position horizontale avec lavant de lappareil face vous et la camra web gauche, la fente pour carte SD est situe dans la partie suprieure du ct gauche, larrire (Figures 21 et 22). Pourinstaller une carte SD, excutez les oprations suivantes :
53 - Cartes Secure Digital SI VOUS INSREZ OU RETIREZ UNE CARTE SD PENDANT LE PROCESSUS DARRT OU DE DMARRAGE DE VOTRE PC TABLETTE STYLISTIC, VOUSRISQUEZ DENDOMMAGER LA CARTE ET/OU VOTRE ORDINATEUR. NINSREZ PAS DE CARTE DANS LA FENTE SIL Y A DE LEAU OU TOUTE AUTRE SUBSTANCE SUR LA CARTE, CAR VOUS POURRIEZ ENDOMMAGER DEFAON PERMANENTE LA CARTE, VOTRE PC TABLETTE STYLISTIC OU LES DEUX. 1 Le guide dutilisation de la carte mmoire vous indiquera comment linstaller. Certaines cartes pourraient ncessiter que votre ordinateur soit teint pendant que vous les insrez. 2 Avant dinsrer votre carte, assurez-vous quaucune autre carte nest dj installe dans la fente. Si cest le cas, consultez la rubrique Retirer une carte SD. 3 Tenez lordinateur de sorte que ltiquette soit dans le mme sens que lcran, puis insrez votre carte dans lafente. 4 Poussez fermement la carte dans la fente jusqu ce quelle soit loge dans le connecteur. Retrait dune carte SD Pour retirer une carte SD, suivez ces tapes faciles :
LE GUIDE DUTILISATION DE LA CARTE MMOIRE VOUS INDIQUERA COMMENT LA RETIRER. CERTAINES CARTES POURRAIENT NCESSITER QUE VOTRE PCTABLETTE STYLISTIC SOIT EN MODE SOMMEIL OU QUIL SOIT TEINT PENDANT QUE VOUS LES RETIREZ. 1 Dans la zone de notification, cliquez sur licne Retirer le priphrique en toute scurit . Dans la liste, mettez la carte en surbrillance, puis cliquez sur Stop. 2 Enfoncez la carte SD jusqu ce que vous sentiez un dclic de dverrouillage. La carte sjecte ensuite de la fente pour que vous puissiez la retirer. 54 - Cartes Secure Digital Chapitre 4 Dpannage de votre PC Tablette Dpannage Il est possible que vous rencontriez parfois des problmes simples de configuration ou dexploitation pouvant tre rsolus sur le champ, ou des problmes au niveau dun priphrique pouvant tre rsolus en remplaant lquipement. Les informations contenues dans cette section vous aideront isoler et rsoudre certains de ces problmes simples et identifier les pannes qui ncessitent une rparation. Identification du problme Si vous prouvez un problme, consultez la procdure suivante avant dentreprendre un processus de dpannage complexe :
1 teignez votre PC Tablette STYLISTIC. 2 Assurez-vous que ladaptateur secteur est connect votre ordinateur portable et une source dalimentation secteur active. 3 Assurez-vous que les cartes ventuellement installes sur lordinateur sont bien branches. Si un problme se produit avec une carte, retirez-la de la fente, vous liminerez ainsi ce risque de dfaillance. 4 Assurez-vous que tous les priphriques connects aux connecteurs externes sont bien branchs. Vous pouvez galement dconnecter ces priphriques pour vous assurer quils ne sont pas lorigine de la panne. 55 5 Mettez votre PC Tablette en marche. Assurez-vous quil soit rest hors fonction pendant 10 secondes au moins avant de le remettre en marche. 6 Laissez sexcuter la procdure damorage. 7 Si le problme na pas t rsolu, consultez le tableau suivant pour obtenir des renseignements plus dtaills concernant le dpannage. SI VOUS PRENEZ EN NOTE TOUT CE QUE VOUS ESSAYEZ, LE SERVICE DASSISTANCE POURRA VOUS AIDER PLUS RAPIDEMENT EN VOUS DONNANT DES SUGGESTIONS SUPPLMENTAIRES AU TLPHONE. 8 Si vous avez essay les solutions suggres par le tableau de dpannage sans succs, communiquez avec le service dassistance :
Appel sans frais : 1-800-8Fujitsu (1-800-838-5487) Site Web : http://www.computers.us.fujitsu.com/support Avant de nous contacter, veuillez avoir les informations suivantes porte de main pour que notre prpos du service la clientle puisse vous venir en aide le plus rapidement possible :
Nom du produit Numro de configuration du produit Numro de srie du produit Date dachat Conditions dans lesquelles le problme est survenu Texte des messages derreur reus Types de priphriques connects, si applicable Pour les numros de srie et de configuration, consultez ltiquette de configuration sur le dessous de votre ordinateur. 56 - Dpannage Problmes spcifiques Utilisation du tableau de dpannage Lorsque vous prouvez des problmes avec votre PC Tablette, essayez de trouver les symptmes sous la colonne Problme du tableau suivant pour la fonction qui vous cause des problmes. Vous trouverez une description des causes communes pour ce symptme sous la colonne Cause possible ; le cas chant, ce que vous pouvez faire pour corriger la situation se trouve sous la colonne Solutions possibles. Il est possible que certaines causes et solutions possibles ne sappliquent pas votre ordinateur. Tableau de dpannage Problmes audio. page 58 Problmes dalimentation lectrique. page 60 Problmes de disque dur . page 58 Problmes darrt et de dmarrage . page 62 Problmes de clavier ou de souris . page 58 Problmes vido . page 63 Problmes de saisie avec le stylet . page 59 Problmes divers . page 64 Problmes de priphrique USB. page 59 57 - Dpannage Problme Problmes audio Cause possible Solutions possibles Aucun son ne sort du haut-parleur incorpor. Le volume est rgl un niveau trs bas. Rglez le volume de votre ordinateur et de votre systme dexploitation. Cliquez sur licne Volume dans la zone de notification, en bas droite de lcran (elle ressemble un haut-parleur). Si la case Mute (Sourdine) est entoure dun cercle rouge, cliquez dessus pour la dslectionner. Des couteurs sont branchs sur votre PC Tablette. Le branchement dcouteurs dsactive le haut-parleur incorpor. Retirez les couteurs. Problmes de disque dur Vous ne pouvez pas accder votre disque dur. Un mauvais identificateur dunit a t utilis par une application lorsquun disque damorage a t utilis pour dmarrer votre ordinateur. Les paramtres de scurit exigent un mot de passe pour le dmarrage du systme dexploitation. Assurez-vous que la lettre dunit utilise par lapplication est bien celle quutilise lesystme dexploitation. Lorsque le systme dexploitation est dmarr partir dun CD, les identifications du lecteur sont ajustes automatiquement. Vrifiez votre mot de passe et vos paramtres de scurit. Problmes de clavier ou de souris Vous avez install un clavier ou une souris externe en option et il/elle ne semble pas fonctionner. Votre systme dexploitation nutilise pas le bon pilote pour ce priphrique. Consultez la documentation du priphrique et du systme dexploitation, puis installez le pilote appropri. Vous avez connect un clavier externe ou une souris et il/elle semble bloquer le systme. Votre systme dexploitation nutilise pas le bon pilote. Consultez la documentation du priphrique et du systme dexploitation, puis installez le pilote appropri. Votre systme sest plant. Essayez de redmarrer votre systme. 58 - Dpannage Problme Problmes de saisie avec le stylet Cause possible Solutions possibles Le curseur ne suit pas le stylet. Lcran doit tre talonn. Pour de plus amples informations, voir Voir talonner lcran en page 29. La Tablette ne ragit pas au stylet. Il se peut que le systme se soit plant. Si le PC Tablette ne ragit pas au stylet, connectez un clavier externe lordinateur pour voir sil ragit aux impulsions des touches. Si lordinateur ne ragit pas non plus dans ce cas, il se peut que lapplication ou le systme se soit plant, auquel cas un redmarrage semble ncessaire. Si lordinateur ragit au clavier mais pas au stylet, contactez votre reprsentant ou distributeur local, ou appelez le service de soutien Fujitsu au 1-800-8Fujitsu (1-800-838-5487) pour obtenir de laide. Problmes de mmoire Dans le panneau de configuration, lcran Systme nindique pas le montant correct de mmoire installe. Votre mmoire est dfaillante. Vrifiez les messages de lauto-diagnostic de dmarrage (POST). Voir Messages de lauto-diagnostic de mise sous tension en page 65. Problmes de priphrique USB Votre systme ne reconnat pas le priphrique USB que vous avez install ou le priphrique ne fonctionne pas correctement. Votre priphrique nest pas bien install. Le priphrique a peut-tre t install pendant quune application tait en excution, par consquent votre systme ne reconnat pas son installation. Votre priphrique pourrait ne pas disposer du bon pilote de logiciel actif. Retirez et rinstallez votre priphrique. Fermez lapplication et redmarrez votre ordinateur portable. Consultez la documentation relative votre logiciel et activez le bon pilote. 59 - Dpannage Problme Problmes dalimentation Cause possible Solutions possibles Lorsque vous allumez votre PC Tablette rien ne semble se. La batterie installe est compltement dcharge ou aucun adaptateur de courant nest install. La batterie est installe, mais elle est dfectueuse ou faible. Le systme a atteint une temprature critique. Vrifiez le tableau de voyants dtat pour dterminer la prsence et ltat de la batterie. Voir Tableau de voyants dtat en page 22. Installez une batterie charge ou branchez un adaptateur dalimentation. Lorsque la batterie descend un niveau critique, le systme se met systmatiquement en mode Veille pour viter tout problme dalimentation. Pour rsoudre ce problme, branchez une source dalimentation externe (adaptateur secteur, par exemple) ou une batterie charge dans lordinateur. Pour viter tout dgt aux composants sensibles la chaleur, lordinateur se met en mode Sommeil lorsque la temprature est trop leve. Il est impossible de reprendre lutilisation de lordinateur tant quil ne sest pas refroidi suffisamment. Mettez lordinateur dans un endroit frais. Ladaptateur secteur nest pas branch convenablement. Vrifiez si votre adaptateur est branch de faon approprie. Voir Sources dalimentation en page 37. Ladaptateur dalimentation ne reoit pas de courant de la prise murale ou de la prise de lavion. Branchez le cordon dalimentation secteur dans une autre prise murale et vrifiez si un interrupteur ou un disjoncteur coupe le courant. Si vous utilisez un adaptateur auto/avion dans un vhicule, assurez-vous que la cl de contact est la position On (marche) ou Acc. (accessoires). Ladaptateur secteur est dfaillant. Essayez un autre adaptateur dalimentation. 60 - Dpannage Problme Cause possible Solutions possibles Votre PC Tablette STYLISTIC steint tout seul. Le PC Tablette ne fonctionne pas lorsquil est aliment uniquement par batterie. Les paramtres de gestion dalimentation sont rgls des temporisations (dlais dinactivit) automatiques trop courtes par rapport vos besoins dexploitation. Votre adaptateur dalimentation est tomb en panne ou a perdu sa source dnergie. Vous avez ignor un avertissement de batterie faible, la batterie sest puise et le systme est entr en mode de veille. Votre batterie est dfectueuse. La batterie installe est puise. Bougez la souris pour rtablir le fonctionnement. Si cela ne fonctionne pas, appuyez sur le bouton dalimentation/veille/reprise. Vrifiez vos paramtres de gestion dalimentation, ou fermez vos applications et consultez les proprits des Options dalimentation du Panneau de configuration pour ajuster les valeurs de temporisation afin quelles rpondent mieux vos besoins. Assurez-vous que ladaptateur est branch et que la prise est alimente. Installez un adaptateur dalimentation puis appuyez sur le bouton dalimentation/veille/reprise. Voir Sources dalimentation en page 37. Vrifiez ltat des batteries laide du Tableau de voyants dtat. Si la batterie est court-circuite, remplacez-la ou retirez-la. Voir Tableau de voyants dtat en page 22. Remplacez la batterie par une batterie charge ou branchez un adaptateur dalimentation. Aucune batterie nest installe. Installez une batterie charge. La batterie na pas t correctement installe. La batterie installe est dfectueuse. Vrifiez si la batterie est bien connecte en la rinstallant. Consultez le tableau de voyants dtat pour connatre ltat de la batterie et remplacez ou retirez la batterie si elle est court-circuite. Voir Tableau de voyants dtat en page 22. 61 - Dpannage Problme Cause possible Solutions possibles La batterie semble se dcharger trop rapidement. Les fonctions dconomies dnergie sont peut-tre dsactives. Consultez le menu Options dalimentation du Panneau de configuration pour changer les paramtres en fonction de vos besoins. La luminosit est rgle au maximum. Rduisez la luminosit. Plus la luminosit est leve, plus lcran daffichage consomme de lnergie. Utilisez un adaptateur de courant pour cette application chaque fois que vous le pouvez. Une des applications que vous excutez utilise beaucoup dnergie en raison dun accs frquent un lecteur ou de lutilisation de la carte rseau local sans fil. La batterie est trs vieille. Remplacez la batterie. Les batteries ont t exposes des tempratures leves. Remplacez la batterie. La batterie est trop chaude ou trop froide. Rtablissez le PC Tablette la temprature dexploitation normale. Licne de chargement sur le tableau de voyants dtat clignote lorsque la batterie est en dehors de la plage de fonctionnement. Problmes darrt et de dmarrage La glissire dalimentation/veille/reprise ne fonctionne pas. La glissire dalimentation/
veille/reprise est dsactiv. Pour le ractiver, allez Panneau de configuration -> Options dalimentation, puis cliquez sur longlet Avancs. Dans la zone Alimentation, slectionnez loption Changer ce que fait le bouton dalimentation . Il est possible quil y ait un conflit entre logiciels. Fermez toutes les applications et essayez le bouton nouveau. 62 - Dpannage Problme Cause possible Solutions possibles Le systme se met en marche et affiche les informations sur la mise en marche, mais nest pas en mesure de charger le systme dexploitation. Vous avez un systme protg qui requiert un mot de passe pour charger votre systme dexploitation. Assurez-vous davoir le bon mot de passe. Accdez lutilitaire de configuration et vrifiez les paramtres de scurit, puis modifiez-les en consquence. Voir Utilitaire de configuration du BIOS en page 41. Les paramtres damorage de lutilitaire de configuration du BIOS sont incompatibles avec votre configuration. Configurez la source dexploitation en appuyant sur la touche [F12] pendant que le logo Fujitsu est affich sur lcran ou utilisez la touche [F2], accdez lutilitaire de configuration et ajustez les paramtres de source partir du menu Amorage. Voir Utilitaire de configuration du BIOS en page 41. Le disque dur na pas t dtect. Utilisez lutilitaire de configuration du BIOS pour dtecter automatiquement le disque dur interne. Un message derreur saffiche sur lcran durant la procdure damorage. Lauto-diagnostic de mise sous tension (POST) a dtect un problme. Votre PC Tablette semble changer les paramtres de configuration lorsque vous le dmarrez. Les modifications que vous avez apportes la configuration du BIOS nont pas t sauvegardes et vous avez quitt lutilitaire sans les sauvegarder. Problmes vido Lcran daffichage demeure vide lorsque vous mettez en marche votre PC Tablette. La temporisation daffichage a t rgle des intervalles trop courts et vous navez pas remarqu que lcran sallume et steint souvent. Consultez les messages de lauto-diagnostic de dmarrage pour dterminer la signification et la gravit du problme. Tous les messages nindiquent pas des erreurs ; certains sont simplement des indicateurs dtat. Voir Messages de lauto-diagnostic de mise sous tension en page 65. Assurez-vous de slectionner loption Sauvegarder les changements et quitter lorsque vous quittez lutilitaire de configuration du BIOS. Bougez la souris pour rtablir le fonctionnement. Si cela ne fonctionne pas, appuyez sur le bouton dalimentation/veille/reprise (lcran daffichage peut avoir t arrt par le mode sommeil, veille automatique ou temporisation vido). Le PC Tablette sest mis en marche en mettant une srie de tonalits et votre cran intgr est vide. Lauto-diagnostic de dmarrage
(POST) a dtect une dfaillance qui ne permet pas lcran de fonctionner. Communiquez avec le service dassistance. 63 - Dpannage Problme Cause possible Solutions possibles Lcran devient vide par lui-mme aprs avoir t utilis. Les valeurs de temporisation menant au mode dconomie dnergie sont rgles des intervalles trs courts et vous navez pas remarqu que lcran sest allum, puis teint de nouveau. Appuyez sur le bouton dalimentation/veille/reprise. (Lcran daffichage peut avoir t arrt par le mode sommeil, veille automatique ou temporisation vido). Le PC Tablette sest mis en mode Sommeil ou en mode Veille prolonge car vous ne lavez pas utilis pendant un certain moment. Appuyez sur le bouton dalimentation/veille/reprise. Vrifiez vos paramtres degestion de lalimentation, ou fermez vos applications et allez dans le menu conomies dnergie de lutilitaire de configuration pour ajuster les valeurs detemporisation afin quelles rpondent mieux vos besoins. Voir Utilitaire de configuration du BIOS en page 41. Si ces zones sont trs petites et si leur nombre est restreint, cela est normal pour un grand cran ACL. Si les zones sont nombreuses ou suffisamment grandes pour perturber vos besoins dexploitation. Ne faites rien. Lcran est dfectueux : communiquez avec le service dassistance. Les applications gnrent souvent leurs propres messages derreur. Pour obtenir de plus amples informations, consultez le guide dutilisation et les crans daide de votre application. Tous les messages nindiquent pas des erreurs ;
certains sont simplement des indicateurs dtat. Lcran affiche des zones claires ou sombres. Problmes divers Un message derreur saffiche sur lcran durant lexcution dune application. 64 - Dpannage Messages de lauto-diagnostic de mise sous tension Voici une liste des messages derreur et dtat que le BIOS Phoenix et/ou votre systme dexploitation peuvent gnrer ainsi quune explication pour chacun deux. Les messages derreurs sont marqus dun *. Si un message derreur est affich et ne se trouve pas dans la liste, prenez-le en note et vrifiez-le dans la documentation du systme dexploitation
( lcran et dans le manuel imprim). Si vous ne trouvez pas dexplication au message, communiquez avec le service dassistance.
*Donnes NVRAM non valides Problme daccs la mmoire NVRAM. Au cas o ce message safficherait, ce qui est peu probable, vous pourriez avoir un problme daffichage. Vous pouvez continuer utiliser votre ordinateur mais vous devriez communiquer avec le service dassistance pour plus dinformations.
*Systme dexploitation introuvable Le systme dexploitation ne peut pas tre localis ni sur le lecteur A: ni sur le lecteur C: Accdez lutilitaire de configuration et vrifiez si le disque fixe et le lecteur A: sont bien identifis et si la squence damorage est bien configure. Le systme dexploitation devrait tre sur le lecteur C: sauf si vous avez chang sensiblement votre installation. Si lutilitaire de configuration est bien install, votre disque dur pourrait tre corrompu.
*Erreur de lhorloge de temps rel - Vrifiez les paramtres dheure et de date Lhorloge de temps rel a chou le test du BIOS. Une rparation de la carte mre pourrait tre ncessaire. Communiquez avec le service dassistance. 65 - Dpannage Restauration de votre image de systme et de vos logiciels Avant de commencer utiliser votre ordinateur, il est trs important de copier sur DVD limage dorigine de votre systme et votre disque damorage. Pour ce faire, suivez les instructions donnes dans les sections Sauvegarde de limage dorigine et Cration de sauvegardes de limage dorigine et des disques de ce chapitre. Enregistrement et restauration de vos images dorigine et de systme Outre les instructions sur lenregistrement de votre image dorigine, ce document explique plusieurs autres procdures importantes, notamment la cration dune image de systme, la restauration de limage dorigine et des images de systme, la gestion de vos images et la restauration des partitions sur un disque dur. POUR INSTALLER DES APPLICATIONS, POUR COPIER LIMAGE DORIGINE ET LES IMAGES DE SYSTME, POUR GRAVER UN DISQUE DAMORAGE, VOUS DEVEZ AVOIR UN GRAVEUR DE DVD INTERNE OU EXTERNE. IL EST EXTRMEMENT IMPORTANT DE COPIER VOTRE IMAGE DORIGINE SUR DES SUPPORTS AMOVIBLES (P. EX. DISQUES DVD). DANS LE CAS CONTRAIRE, VOUS RISQUEZ DE NE PAS POUVOIR RESTAURER LIMAGE UNE DATE ULTRIEURE. NOUS VOUS RECOMMANDONS DUTILISER DES DISQUES DE TYPE DVD-R OU DVD+R POUR VOS SAUVEGARDES MAIS LES SUPPORTS* SUIVANTS SONT AUSSI PRIS EN CHARGE :
POUR LIMAGE DORIGINE, LES DONNES DAPPLICATION ET LE DISQUE DAMORAGE POUR LES IMAGES DE SYSTME CRES PAR LUTILISATEUR
* SELON LE LECTEUR OPTIQUE ET LE FORMAT DU SUPPORT UTILIS, CERTAINS TYPES DE SUPPORTS PEUVENT NE PAS CONVENIR LA CRATION DIMAGES DE SYSTME.
: DVD-R/+R, DVD-RW/+RW, DVD-DL.
: DVD-R/+R. EN RAISON DE CERTAINES EXIGENCES DE LICENCE, CERTAINES APPLICATIONS TIERCES DEVRONT TRE INSTALLES SPARMENT. Enregistrement de votre image dorigine Lorsque vous avez achet votre nouveau systme, limage dorigine a t pr-installe dans une partition cache de votre disque dur. Une copie de limage dorigine vous permettra, en cas de panne grave, de restaurer votre systme exactement comme il tait lorigine. 66 - Restauration de votre image de systme et de vos logiciels Pour crer une copie de scurit de limage dorigine sur des DVD, quatre ou cinq disques vierges (les DVD-R ou DVD+R sont recommands) vous seront ncessaires. Lorsque vous avez termin la copie, assurez-vous dtiqueter clairement les disques et de les conserver en lieu sr. Cration dimages de sauvegarde de limage dorigine et dun disque damorage Le bouton [Grer/Changer] permet de crer des copies de sauvegarde de limage dorigine et/ou du disque damorage. TOUTES LES DONNES CRES PAR LUTILISATEUR SERONT SUPPRIMES DE VOTRE SYSTME LORSQUE LIMAGE DORIGINE SERA RESTAURE. 1 Lancez lapplication Sauvegarde et restauration de systme avec laide de licne correspondante sur le bureau Windows, puis cliquez sur [Oui] dans la bote de dialogue Contrle de compte dutilisateur. 2 Sur lcran Faites une copie de scurit de vos donnes, cliquez sur [Suivant]. 3 Slectionnez longlet [Grer/crer], puis cliquez sur [Crer un jeu de disques de restauration] afin de graver limage dorigine de votre ordinateur sur des DVD. 4 Sous Step 1: Veuillez slectionner un type de support pour le disque de restauration , slectionnez Type de support dans la liste droulante, puis cliquez sur [Suivant]. (Remarque : cet cran indique le nombre de disques ncessaires la restauration). 5 Sous Step 2: Confirm your Recovery Disc (tape 2 : Confirmez votre disque de restauration), les disques damorage et de restauration sont par dfaut tous les deux slectionns dans la Liste des disques de restauration. Si vous gravez une sauvegarde pour la premire fois, veillez slectionner les options suivantes : Cliquez sur [Suivant]. 6 Sur lcran de confirmation Mise en garde concernant les disques , cliquez sur [OK]. VEILLEZ BRANCHER LORDINATEUR SUR LE SECTEUR POUR LES TAPES SUIVANTES CAR ELLES RISQUENT DE DURER LONGTEMPS. 67 - Restauration de votre image de systme et de vos logiciels 7 Cliquez sur le bouton [Dmarrer] de lcran tape 3 : Making Recovery Disc (tape 3 : Cration du disque de Restauration), cliquez sur [Dmarrer]. 8 Le systme vous demandera dinsrer les disques. 9 Lorsque la procdure est termine, vous devez cliquer sur [Terminer] sous le message tape 4 : Making Recovery Disc process has been completed (tape 4 : La cration du disque de restauration est termine) apparat, cliquez sur [Terminer]. Restauration de votre image dorigine. Si vous avez un jour besoin de restaurer votre image dorigine, excutez les oprations suivantes. TOUTES LES DONNES CRES PAR LUTILISATEUR SERONT SUPPRIMES DE VOTRE SYSTME LORSQUE LIMAGE DORIGINE SERA RESTAURE. Si vous dsirez restaurer votre image dorigine, excutez les oprations indiques sous Excution de la fonctionnalit Restauration et Utilitaires partir du disque dur . Cration dune image de systme tape facultative : Depuis votre bureau Windows, lancez lutilitaire Applications Fujitsu en prime, puis slectionnez les composants que vous dsirez installer. (Vous pouvez aussi accder aux Applications bonus en ouvrant le panneau Charms partir de lcran Modern Start, et en recherchant les applications bonus Fujitsu.) Copies de sauvegarde de limage systme configures par lutilisateur : Sur votre bureau, il existe une icne [Sauvegarde et restauration du systme] qui vous permet de faire une copie de scurit de votre image systme actuelle sur un autre emplacement de votre disque dur ou sur un support externe. Une image systme est un enregistrement de la configuration de votre unit de disque C un moment prcis. Il est conseill de faire occasionnellement une copie de scurit de limage systme afin de pouvoir revenir certains stades prcdents sans avoir revenir au tout dbut, limage dorigine. 68 - Restauration de votre image de systme et de vos logiciels Par dfaut, les images de systme sont enregistres dans lunit de disque D: situe dans le dossier Sauvegarde et restauration du systme. Vous pouvez galement dcider denregistrer limage sur un disque dur externe. 1 Lancez lapplication Sauvegarde et restauration de systme avec laide de licne correspondante sur le bureau Windows, puis cliquez sur [Oui] dans la bote de dialogue Contrle de compte dutilisateur. 2 Sur lcran Faites une copie de scurit de vos donnes, cliquez sur [Suivant]. 3 Sur lcran Sauvegarde et restauration de systme, slectionnez longlet [Sauvegarde]. 4 Cliquez sur le bouton [Sauvegarder le systme de lutilisateur]. 5 Sous Step 1: Select a backup destination (tape 1 : Slectionnez une destination de sauvegarde), slectionnez le disque de destination. Par dfaut, le lecteur de destination est le D. Vous pouvez galement choisir loption
[Autre disque] pour enregistrer limage sur un disque externe. Slectionnez si vous dsirez que le systme excute une opration [Arrter] ou [Redmarrer] lorsque la procdure est termine. 6 Sous Step 2: Name your backup images (tape 2 : Nommez vos images de sauvegarde.), vous pouvez saisir jusqu 300 caractres dinformations se rapportant au fichier de sauvegarde. Ces informations vous aideront identifier limage ultrieurement. 7 Sous Step 3: Faites une copie de scurit de toute limage du disque C: , vrifiez vos paramtres de sauvegarde et cliquez sur [Suivant]. 8 Cliquez sur le bouton [OK] de lcran tape 4 : Please confirm the following before starting your backup (tape4:
Veuillez confirmer les donnes suivantes avant de lancer la sauvegarde), cliquez sur [OK] pour redmarrer votre ordinateur et lancer la sauvegarde. 9 Une fois la sauvegarde effectue et aprs redmarrage du systme, lcran Step 5: Backup Completed. Confirm the results (tape 5 : Sauvegarde termine. Confirmez les rsultats) doit apparatre sur le bureau, confirmant que la cration limage de sauvegarde est russie. Cliquez sur [Fermer] pour fermer la bote de dialogue Sauvegarde et restauration de systme. 10 Cliquez sur [OK] pour fermer lutilitaire Sauvegarde et restauration de systme. 69 - Restauration de votre image de systme et de vos logiciels Gestion de vos images de sauvegarde Loutil Sauvegarde et restauration du systme permet galement de copier vos images de sauvegarde, de les archiver sur des DVD, ou de les supprimer de votre disque dur lorsquelles ny sont plus utiles. 1 Lancez lapplication Sauvegarde et restauration de systme avec laide de licne correspondante sur le bureau Windows, puis cliquez sur [Oui] dans la bote de dialogue Contrle de compte dutilisateur. 2 Sur lcran Faites une copie de scurit de vos donnes, cliquez sur [Suivant]. 3 Slectionnez longlet [Crer/grer] et cliquez sur [Grer la sauvegarde de systme de lutilisateur]. 4 Dans la fentre suivante, le systme vous offre de [Copier], [Supprimer] et [Ajouter des commentaires] vos images. Slectionnez laction que vous voulez voir le bouton effectuer. Si vous choisissez Copier (Pour que le bouton [Copier] fonctionne, un disque externe doit tre connect au systme, faute de quoi toute tentative de copie produira un message derreur.) a. Sous Step 1: Select a backup file that you wish to copy (tape 1 : Slectionnez un fichier de sauvegarde que vous souhaitez copier.), slectionnez lemplacement du fichier de sauvegarde dsir. Une liste de fichiers de sauvegarde apparat. Dans la liste, slectionnez le fichier que vous dsirez copier et cliquez sur [Suivant]. b. Sous Step 2: Slectionnez le disque sur lequel sera copi le fichier de restauration , slectionnez le fichier de destination et cliquez sur [Suivant]. c. Sous Step 3: Commencez copier les informations suivantes , vrifiez les informations affiches et cliquez sur [Dmarrer]. d. Lcran Step 4: Processing backup data copying (tape 4 : Copie des donnes de sauvegarde en cours), affiche une barre de progression. e. Cliquez sur le bouton [Terminer] de lcran tape 5 : Copy completed. Confirm the results
(tape 5 : Confirmez les rsultats), cliquez sur [Terminer]. 70 - Restauration de votre image de systme et de vos logiciels Slection de loption [Supprimer]. a. Sous Step 1: Please select your target data (tape 1 : Veuillez slectionner les donnes dsires.), slectionnez lemplacement du fichier de sauvegarde dsir. Une liste de fichiers de sauvegarde apparat Slectionnez le ou les fichiers que vous dsirez supprimer et cliquez sur [Suivant]. b. Cliquez sur le bouton [Dmarrer] de lcran tape 2 : Delete backup data (tape 2 : Supprimer les donnes de sauvegarde), cliquez sur [Dmarrer]. c. Le systme ouvre une fentre de confirmation. Cliquez sur [OK]. d. Cliquez sur le bouton [Terminer] de lcran tape 4 : Delete process has been completed
(tape 4 : Lasuppression est termine.), cliquez sur [Terminer]. Slection de loption [Ajouter un commentaire]. a. Sous Step 1: Please select your target data (tape 1 : Veuillez slectionner les donnes dsires.), slectionnez lemplacement du fichier de sauvegarde dsir. Une liste de fichiers de sauvegarde apparat. Slectionnez le fichier auquel vous dsirez ajouter des commentaires et cliquez sur [Suivant]. b. Sous Step 2: Add comment (tape 2 : Ajouter un commentaire), saisissez au maximum 300 caractres dans la zone Commentaire , puis cliquez sur [Ajouter]. c. Cliquez sur le bouton [Terminer] de lcran tape 3 : Adding comment has been completed (tape 3 : Ajout du commentaire termin), cliquez sur [Terminer]. Restauration partir de vos images de sauvegarde 1 Lancez lapplication Sauvegarde et restauration de systme avec laide de licne correspondante sur le bureau Windows, puis cliquez sur [Oui] dans la bote de dialogue Contrle de compte dutilisateur. 2 Sur lcran Faites une copie de scurit de vos donnes, cliquez sur [Suivant]. 3 Slectionnez longlet Restaurer et cliquez sur Restore User System Backup (Restaurer partir dune sauvegarde du systme utilisateur). 71 - Restauration de votre image de systme et de vos logiciels 4 Sous Step 1: Avant de dbuter la procdure de restauration, excutez les oprations suivantes , vrifiez les informations affiches et cliquez sur [OK]. Le systme redmarrera pour permettre la restauration de commencer. 5 Aprs le redmarrage du systme, lcran Explanation about Restore User System Backup (Explications sur la restauration partir de la sauvegarde de lutilisateur) apparat. Lisez le contrat de licence, puis cliquez sur [Jaccepte]
et sur [Suivant]. 6 Dans la liste de donnes de restauration qui saffiche ensuite, slectionnez une image de restauration et cliquez sur [Suivant]. 7 Cliquez sur le bouton [Dmarrer] de lcran Confirmer avant le dbut de la restauration . 8 Lorsque la restauration est termine, cliquez sur [Fermer] dans le message Restauration termine . Lordinateur redmarre. Utilisation des outils Restauration et Utilitaires Le disque Restauration et Utilitaires contient divers outils permettant de restaurer votre image dorigine ou une image de systme, ainsi que deffacer certaines donnes inutiles sur votre disque dur. Mthodes pour accder aux utilitaires Les outils Restauration et Utilitaires sont pr-installs en usine dans une partition cache et sont disponibles sur le disque auto-amorage. Veuillez prendre note que si vous modifiez la configuration des partitions de votre disque dur, vous risquez de supprimer les outils Restauration et Utilitaires . Dans un tel cas, vous ne pourrez plus utiliser la partition cache pour lancer les outils Restauration et Utilitaires , mais vous pourrez toujours amorcer le systme partir du disque damorage. Comment dterminer si la fonctionnalit Restauration et Utilitaires est dj installe 1 Allumez ou redmarrez votre systme. Lorsque le logo Fujitsu apparat, appuyez sur la touche [F12]. 2 Dans le menu Amorage qui apparat, vrifiez si loption <Restauration et Utilitaires> est prsente. Si elle ny est pas, cela signifie que la fonctionnalit doit tre utilise partir du disque. Si loption <Restauration et Utilitaires> nest pas disponible, reportez-vous Excution de la fonctionnalit Restauration et Utilitaires partir du disque damorage . 72 - Restauration de votre image de systme et de vos logiciels Excution de la fonctionnalit Restauration et Utilitaires partir du disque dur 1 Allumez ou redmarrez votre systme. Lorsque le logo Fujitsu apparat, appuyez sur la touche [F12]. 2 Avec le curseur, allez en bas de page jusqu <Restauration et Utilitaires>, puis appuyez sur [Entre]. 3 Choisissez votre langue (anglais ou franais). 4 Trois options sont disposition : Diagnostics, Restauration et Utilitaires (pour savoir comment utiliser ces outils, consultez la section Restauration et Utilitaires ci-dessous). Excution de la fonctionnalit Restauration et Utilitaires partir du disque damorage Si vous dsirez vrifier/changer la priorit damorage (plutt que de dmarrer partir du disque dur ou dun lecteur de disquette externe), excutez les oprations suivantes :
1 Mettez le systme sous tension. Lorsque le logo Fujitsu apparat lcran, appuyez sur la touche [F12]. 2 Mettez en surbrillance loption CD/DVD du menu damorage et appuyez sur la touche [Entre]. 3 Mettez le disque damorage sur le plateau du lecteur. 4 Cliquez sur [OK]. 5 Slectionnez le mode damorage CD/DVD. Mode UEFI et appuyez sur [Entre]. Le logo Fujitsu suivi dune barre de progression, apparatra en bas de lcran pendant le transfert des fichiers partir du disque. Restauration et Utilitaires Outil Diagnostics : Loutil de diagnostic est conu pour tre utilis par des informaticiens professionnels. Il y a peu de chances que vous ayez besoin de lutiliser. Si vous devez toutefois lutiliser, procdez selon les tapes suivantes :
1 Appuyez sur le bouton Outil Diagnostic pour dmarrer loutil de diagnostic. Une barre de progression saffiche pendant le dmarrage de loutil. 2 Lisez lavis et cliquez sur [OK]. 73 - Restauration de votre image de systme et de vos logiciels 3 Dans la fentre affichant les outils de diagnostic matriel Fujitsu, choisissez une ou plusieurs des options suivantes :
Unit centrale, Mmoire, cran, Disque dur, CD/DVD/BD, Disquette, Clavier, et Souris. Cliquez sur lebouton [Option]
pour indiquer combien de fois la procdure de diagnostic doit tre excute sur chaque composant slectionn. Appuyez sur [Excuter] pour lancer le fonctionnement de loutil de diagnostic. 4 Une fois lopration termine, les composants slectionns sont entours en rouge, ce qui indique quils ont t diagnostiqus, puis la fentre de rsultats apparat. 5 Cliquez sur [Terminer] pour fermer loutil de diagnostic, puis cliquez sur [Oui] pour confirmer la fin de la session de diagnostic. Outil Restauration : Loutil de restauration contient trois options. Copies de sauvegarde de limage systme configures par lutilisateur : Restauration du disque C: partir du disque D: ou dun support externe), Restauration du disque C:
Restauration de limage dorigine (disque C: uniquement), et Restauration complte dudisque dur : Vous pouvez utiliser ces outils pour restaurer limage dorigine partir de la partition cache, pour restaurer une image de sauvegarde cre par vous ou des images enregistres sur des DVD, et pour restaurer compltement votre disque dur. Si vous dsirez savoir comment crer des DVD de restauration de limage dorigine, des DVD de sauvegarde cre par lutilisateur, et une sauvegarde de limage de systme, reportez-vous aux sections appropries ci-dessus. Pour une restauration partir du disque D: ou dun support externe :
1 Cliquez sur [Images de systme de lutilisateur]
2 Un cran avec une barre de progression saffiche, suivi par lcran avec laccord de licence. Cliquez sur [Jaccepte]
pour accepter les conditions du contrat. 3 Dans la liste dimages de restauration qui saffiche ensuite, slectionnez une image de restauration et cliquez sur[Suivant]. 4 Cliquez sur le bouton [Dmarrer] de lcran Confirmer avant le dbut de la restauration . Le processus de restauration dbute ensuite. 5 Lorsque la restauration est termine, cliquez sur [Fermer] dans le message Restauration termine . Lordinateur redmarre. 74 - Restauration de votre image de systme et de vos logiciels Pour une restauration partir de limage dorigine (partition cache) :
1 Cliquez sur [Restaurer le disque C: ]. 2 Un cran avec une barre de progression saffiche, suivi par lcran Restore Factory Image (only C: drive)
(Restauration partir de limage dorigine disque C: uniquement) confirmant que limage dorigine sera restaure sur le disque C: et que les donnes prsentes sur le disque D: seront conserves. Cliquez sur [Suivant]. 3 Lisez les instructions, puis cliquez sur [Jaccepte] et sur [Suivant]. 4 Cliquez sur [OK] en bas du message davertissement pour restaurer limage dorigine sur le disque C:. 5 Lorsque lcran avec la barre de progression apparat, attendez la fin du processus. 6 Lorsque la procdure est termine, cliquez sur [Terminer]. Lordinateur redmarre. Pour une restauration complte du disque dur :
Suivez les instructions donnes dans la section approprie : Recovering your Factory Image using Recovery and Utility
(for new hard drive or non-bootable hard drive) (Restauration de limage dorigine avec la fonctionnalit Restauration et Utilitaires - partir dun nouveau disque dur ou dun disque dur sans auto-amorage). Outil Utilitaires : Loutil Utilitaires comprend deux options : Supprimer les donnes sur le disque dur et Crer des partitions . Lutilitaire Supprimer les donnes sur le disque dur permet de supprimer toutes les donnes sur votre disque dur et den empcher leur rutilisation. REMARQUE : Nutilisez pas lutilitaire Supprimer les donnes sur le disque dur , moins que vous soyez absolument certain de vouloir effacer votre disque dur en entier, y compris toutes les partitions. Pour supprimer les donnes sur le disque dur :
a. Cliquez sur [Suppression des donnes sur le disque dur]
b. Une barre de progression apparat, suivie par un cran avec laccord de licence. c. Acceptez les conditions du contrat et cliquez sur [Suivant]. d. Dans la liste de disques durs affiche, choisissez le disque dur sur lequel les donnes seront effaces, puiscliquez sur [Suivant]. 75 - Restauration de votre image de systme et de vos logiciels Lutilitaire Cration de partitions sert changer la taille des partitions sur le disque C: et le disque D:. Pour excuter cet utilitaire :
delicence. a. Cliquez sur [Cration dune partition]. b. Une barre de progression apparat, suivie par un cran avec laccord de licence. Acceptez laccord c. Sur lcran Outil de restauration Cration de partitions, glissez la coulisse jusqu la taille approprie et cliquez sur [OK]. d. Au message vous demandant de confirmer la cration des partitions, cliquez sur [Oui]. Restauration de limage dorigine avec la fonctionnalit Restauration et Utilitaires
( partir dun nouveau disque dur ou dun disque dur sans auto-amorage) Si vous avez install un nouveau disque dur ou si votre disque dur na pas de fonction dauto-amorage, excutez lesoprations suivantes. 1 Mettez le systme sous tension. Lorsque le logo Fujitsu apparat lcran, appuyez sur la touche [Entre]. 2 Mettez en surbrillance loption CD/DVD du menu damorage et appuyez sur la touche [Entre]. 3 Insrez le disque damorage dans le lecteur de DVD, puis cliquez sur [OK]. 4 Slectionnez le mode damorage CD/DVD. Mode UEFI et appuyez sur [Entre]. Le logo Fujitsu, suivi dune barrede progression, apparatra en bas de lcran pendant le transfert des fichiers partir du disque. 5 Choisissez votre langue (anglais ou franais). 6 Trois options sont disposition : Diagnostics, Restauration et Utilitaires. Slectionnez [Restauration]. 7 Slectionnez [Restauration intgrale du disque dur]. 8 Cliquez sur [Suivant] pour confirmer la restauration complte du disque dur. (Toutes les donnes prsentes surledisque dur seront effaces.) 9 Lisez le contrat de licence, slectionnez [Jaccepte] et cliquez sur [Suivant]. 76 - Restauration de votre image de systme et de vos logiciels 10 Cliquez le bouton [Suivant] de lcran Vrification du disque de restauration afin de confirmer que le disque damorage a bien t insr dans le lecteur de disque. 11 Lcran de vrification du disque de restauration apparat, suivi par un message vous invitant insrer le premier disque. Cliquez sur [OK] pour continuer. Rptez cette tape pour tous les disques. Lorsque tous les disques de restauration ont t vrifis et que la procdure de vrification est entirement termine, cliquez sur [Suivant]. 12 Rinsrez le premier disque de restauration et cliquez sur [Suivant]. 13 Lorsque le systme affiche lavertissement final signalant que toutes les donnes des disques C: et D: seront perdues, cliquez sur [OK]. Le processus de restauration dmarre alors. 14 Suiviez les instructions dinsertion du disque de restauration suivant et cliquez sur [OK]. 15 Une fois limage dorigine copie sur le disque dur et restaure, insrez le disque damorage lorsque le message vous y invite. 16 Lorsque la procdure de restauration est termine, cliquez sur [Terminer] pour redmarrer le systme. Lordinateur redmarrera automatiquement puis effectuera son amorage initial. Tlchargement des mises jour de pilotes Lutilitaire FSDM (Fujitsu Software Download Manager) est votre disposition pour tlcharger les plus rcentesversions des pilotes, utilitaires et applications depuis le site dassistance Fujitsu. Si vous avez unsystmedexploitation Windows 8 ou Windows 7, vous devez vous connecter au site dassistance
(http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS) 77 - Restauration de votre image de systme et de vos logiciels Chapitre 5 Entretien Entretien de votre PC Tablette Si vous prenez soin de votre PC Tablette STYLISTIC, vous augmenterez sa dure de vie et sa fiabilit. Cette section fournit certains conseils relatifs lentretien de votre PC Tablette et de ses dispositifs. LE SYSTME CONTIENT DES COMPOSANTS POUVANT TRE FORTEMENT ENDOMMAGS PAR UNE DCHARGE LECTROSTATIQUE (DES). POUR MINIMISER CE RISQUE, VEUILLEZ PRENDRE LES PRCAUTIONS SUIVANTES :
SI VOUS LAISSEZ TOMBER VOTRE PC TABLETTE OU ENDOMMAGEZ LE BOTIER DUNE FAON OU DUNE AUTRE, TEIGNEZ IMMDIATEMENT LORDINATEUR ET DBRANCHEZ LA FICHE DALIMENTATION. DANS LE CAS CONTRAIRE, CELA RISQUE DE PROVOQUER UN COURT-CIRCUIT, DE LA FUMEET/OU UN INCENDIE. POUR SAVOIR COMMENT RPARER LORDINATEUR, CONTACTEZ LE SERVICE APRS-VENTE ET LE SOUTIEN TECHNIQUE FUJITSU PAR TLPHONE AU 1-800-8FUJITSU (1-800-838-5487), PAR COURRIEL 8FUJITSU@US.FUJITSU.COM OU VIA NOTRE SITE WEB HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT. AVANT DE CONNECTER OU DE DCONNECTER VOTRE PC TABLETTE STYLISTIC (LORSQUE VOUS UTILISEZ UN DUPLICATEUR DE PORTS), IL EST TOUJOURS RECOMMAND DE TOUCHER UN OBJET MTALLIQUE MIS LA TERRE AFIN DE DCHARGER LLECTRICIT STATIQUE QUI SESTACCUMULEDANS VOTRE CORPS. TOUT QUIPEMENT LECTRIQUE PEUT TRE DANGEREUX SIL EST UTILIS DE FAON INAPPROPRIE. LE FONCTIONNEMENT DE CE PRODUIT OU DAUTRES PRODUITS SIMILAIRES DOIT TOUJOURS SE FAIRE SOUS LA SUPERVISION DUN ADULTE. NE PERMETTEZ PAS AUX ENFANTS DACCDER LINTRIEUR DE TOUT PRODUIT LECTRIQUE ET NE LEUR PERMETTEZ PAS DEN MANIPULER LES CBLES. Votre ordinateur STYLISTIC est durable, mais cest un appareil lectronique sensible. Traitez-le avec respect etprcaution. Prenez lhabitude de transporter votre ordinateur dans une mallette convenable. 78 Nessayez pas de rparer lordinateur vous-mme. Suivez toujours les instructions dinstallation la lettre. Gardez-le loin de la nourriture et des boissons. Si vous renversez par accident un liquide sur votre PC Tablette STYLISTIC :
1 teignez-le. 2 Positionnez-le de faon ce que le liquide puisse scouler et laissez-le scher pendant 24 heures, oupluslongtemps sil le faut. 3 Sil ne dmarre pas une fois sec, contactez le service dassistance clients. Nutilisez pas votre PC Tablette dans un environnement trs humide ( proximit dune baignoire, dunepiscine). Utilisez toujours ladaptateur secteur dorigine et des batteries approuves pour votre ordinateur. vitez dexposer lordinateur au sable, la poussire et dautres matires. Nexposez pas votre ordinateur portable la lumire directe du soleil pendant de longues priodes, carlestempratures de plus de 60C (140F) pourraient lendommager. Ne dposez pas dobjets lourds ou tranchants sur lordinateur. Nettoyage de votre PC Tablette Instructions gnrales Avant de nettoyer ou de dsinfecter lextrieur de votre ordinateur, le clavier ou lcran ACL, prenez garde toujours teindre le systme, dbrancher ladaptateur secteur et retirer la batterie. Suivez les procdures de nettoyage en utilisant des produits nettoyants recommands disponibles dans le commerce. Extrieur et clavier de lordinateur Pour nettoyer lextrieur et le clavier, utilisez uniquement lun des produits suivants :
Kit de nettoyage pour ordinateur portable Office Depot N 154-616 Lingettes Meridrew Enterprises Klear_Screen Lingettes de nettoyage 3M CL563 Remarque : Aprs avoir nettoy votre systme avec lun de ces produits, faites-le reluire et retirez les traces de produit laide dun tissu doux non-pelucheux. 79 - Entretien de votre PC Tablette cran ACL, capteur dempreintes digitales*
Pour nettoyer lcran ACL ou le capteur dempreintes digitales, utilisez uniquement lun des produits suivants :
Kit de nettoyage pour ordinateur portable Office Depot N 154-616 Lingettes Meridrew Enterprises Klear_Screen
* Convient aux crans des PC Tablettes, PC convertibles avec protecteur ACL et ordinateurs portables standard. Remarque : Nettoyez lcran doucement et laissez-le scher avant dallumer votre ordinateur. Suivez les procdures de dsinfection en utilisant des dsinfectants recommands disponibles dans le commerce Pour dsinfecter le PC Tablette, utilisez uniquement lun des produits suivants :
Dsinfectant pour hpitaux Veridien ViraGuard Lingettes dsinfectantes Veridien ViraGuard 1 Dsinfectez la surface avec un chiffon doux lgrement mouill avec la solution. Laissez scher la surface avant dallumer lordinateur. OU 2 Nettoyez la surface de lordinateur laide dun tissu doux imbib dune solution dthanol 50% ou dun autre germicide base dthanol homologu par lEPA ( Environment Protection Agency , ou Agence amricaine de protection de lenvironnement) en tant que dsinfectant hospitalier. SI VOUS NUTILISEZ PAS LES BONS PRODUITS, LAFFICHAGE DE LCRAN ACL OU LORDINATEUR LUI-MME PEUT EN TRE ENDOMMAG. POUR SAVOIR COMMENT UTILISER ET MANIPULER CONVENABLEMENT LES PRODUITS NETTOYANTS, PRENEZ GARDE TOUJOURS CONSULTER LES PROCDURES DE NETTOYAGE DU FABRICANT, AINSI QUE LES FICHES TECHNIQUES DE SCURIT. NUTILISEZ JAMAIS DE NETTOYANTS BASE ALCALINE, DAMMONIAQUE, DACIDE, OU DE PRODUITS CHIMIQUES BIOLOGIQUES TELS QUE DISSOLVANTS POUR PEINTURE, ACTONE, ALCOOL PROPYLIQUE OU ISOPROPYLIQUE OU PTROLE. LA FINITION DES SURFACES DE LORDINATEUR ET LA PELLICULE DE PROTECTION DE LCRAN ACL POURRAIENT EN TRE ENDOMMAGES. NUTILISEZ JAMAIS DAIR COMPRIM POUR NETTOYER VOTRE ORDINATEUR. 80 - Entretien de votre PC Tablette Entreposage de votre PC Tablette au lithium-polymre, puis enlevez-les.
(-25C) et 140F (60C). Si vous entreposez votre PC Tablette durant un mois ou plus, teignez-le, chargez compltement les batteries Rangez votre Fujitsu STYLISTIC dans un endroit frais et sec. Les tempratures acceptables sont comprises entre 13F Rangez votre ordinateur portable et les batteries sparment. Si vous rangez votre ordinateur avec une batterie installe, la batterie se dchargera et sa dure de vie sera rduite. De plus, une batterie dfectueuse pourrait endommager votre ordinateur. TEIGNEZ TOUJOURS VOTRE ORDINATEUR AVANT DE LE TRANSPORTER ET/OU DE LEMBALLER. APRS AVOIR TEINT LE SYSTME, ATTENDEZ QUE LEPANNEAU DE VOYANTS DTAT INDIQUE BIEN LE STATUT HORS TENSION (CEST DIRE QUAUCUN VOYANT NEST ALLUM). IL EST POSSIBLE QUE LAPPAREIL NE SE METTE PAS AUTOMATIQUEMENT EN MODE HORS TENSION OU VEILLE PROLONGE APRS QUE VOUS AVEZ FERM LE COUVERCLE. CETTE SITUATION PEUT SE PRODUIRE EN FONCTION DES PARAMTRES DE SCURIT PAR MOT DE PASSE QUI GRENT LA PR-INITIALISATION DU SYSTME OU DUNE AUTRE APPLICATION EN COURS DUTILISATION SUR LORDINATEUR. SI VOUS ESSAYEZ DE TRANSPORTER LORDINATEUR ALORS QUIL EST ALLUM, VOUS RISQUEZ DENDOMMAGER LA TABLETTE CAUSE DES CHOCS ETSURCHAUFFES VENTUELS. Voyager avec votre PC Tablette Ne transportez pas votre PC Tablette pendant quil est en marche. Vous devriez toujours transporter votre PC Tablette en cabine au lieu de lenregistrer comme bagage. Ne faites jamais passer votre PC Tablette au dtecteur de mtal. Demandez plutt quil soit vrifi la main par du personnel de scurit. Par contre, le PC Tablette peut tre soumis un appareil radioscopique correctement rgl. Pour viter les problmes, placez-le proximit de lentre de lappareil et retirez-le aussitt que possible ou faites inspecter votre ordinateur portable manuellement par le personnel de scurit. Il se peut que les responsables de la scurit vous demandent dallumer votre ordinateur, alors assurez-vous que vous avez une batterie charge disposition. 81 - Entretien de votre PC Tablette Apportez avec vous les adaptateurs de fiches ncessaires lorsque vous voyagez outre-mer. Vrifiez le diagramme suivant pour dterminer quel adaptateur de fiche vous serait ncessaire ou renseignez-vous auprs de votre agent de voyage. Type de prise Emplacement Type de prise Emplacement Canada, tats-Unis, Mexique, certains pays dAmrique latine, Japon, Core, Tawan, Philippines Russie et Communaut des tats indpendants (CEI), la plupart des pays dEurope, certains pays dAmrique Latine, Moyen-Orient, certains pays dAfrique, Hongkong, Inde, laplupart des pays de lAsie du Sud le Royaume-Uni, Irlande, Malaisie, Singapour, certains paysdAfrique Chine, Australie, Nouvelle-Zlande Batteries Entretien de la batterie Manipulez toujours les batteries avec soin. Ne court-circuitez pas les terminaux des batteries (cest dire, ne touchez pas les deux terminaux avec des objets mtalliques). Ne transportez pas des batteries dans votre poche ou sac main car elles pourraient entrer en contact avec de la monnaie, des cls ou dautres objets mtalliques. Cela pourrait causer une explosion ou un incendie. Il ne faut jamais laisser tomber, percer, dsassembler, abmer ou incinrer une batterie. Rechargez les batteries uniquement selon les instructions de ce manuel et seulement dans des endroits ars. Ne laissez pas les batteries dans des endroits chauds pendant plus dune journe ou deux. Les grandes chaleurs risquent de raccourcir la dure de vie de votre batterie. Ne rangez pas la batterie pendant plus de 6 mois sans la recharger. 82 - Entretien de votre PC Tablette Augmenter la dure de vie des batteries vous le pouvez. Alimentez votre PC Tablette avec ladaptateur secteur ou ladaptateur dauto/avion optionnel chaque fois que Si votre ordinateur portable fonctionne sur lalimentation par batterie pendant toute une journe, branchez-le sur ladaptateur secteur durant la nuit pour recharger la batterie. Gardez la luminosit au niveau le plus bas possible. Rglez la gestion de la consommation dnergie pour une dure de vie maximale de la batterie. Lorsque votre PC Tablette est allum et que vous ne lutilisez pas, mettez-le en mode sommeil. Limitez votre accs au lecteur multimdia. Dsactivez la fonction davis automatique dinsertion de votre lecteur Entretien de votre lecteur multimdia Entretien de vos lecteurs (lorsquun priphrique externe est install) Les disques multimdias sont des dispositifs prcis qui fonctionneront de manire fiable si vous en prenez bien soin. Rangez toujours vos disques multimdias dans leurs tuis lorsquils ne sont pas utiliss. Tenez toujours les disques par les bords et vitez den toucher la surface. vitez de ranger les disques multimdias dans des endroits o les tempratures sont extrmes. Ne courbez pas les disques multimdias, ne les rayez pas et ne dposez pas dobjets lourds par dessus. Ne renversez pas de liquides sur les disques multimdia, ne les exposez pas la poussire. Ncrivez jamais sur la surface de ltiquette avec un stylo bille ou un crayon. Utilisez toujours un crayon-feutre. Si un disque est sale, utilisez seulement un nettoyant pour DVD/CD ou essuyez-le avec un chiffon doux, propre et non pelucheux : commencez par le bord intrieur et essuyez en direction du bord extrieur. Si un disque subit un changement soudain de temprature, il est possible quune condensation se forme sur la surface. Essuyez lhumidit avec un chiffon doux et non pelucheux, puis laissez le disque scher temprature ambiante. NUTILISEZ PAS de sche-cheveux ou dautre appareil chauffant pour scher les disques multimdia. 83 - Entretien de votre PC Tablette Entretien de votre lecteur optique optionnel Votre lecteur optique (en option) a une longue dure de vie mais vous devez en prendre soin. Veuillez faire attention aux points suivants :
Le lecteur fait pivoter le disque compact une vitesse trs leve. Lorsquil fonctionne, ne le transportez pas dun endroit un autre, et vitez quil subisse un choc ou des vibrations. vitez dutiliser ou de ranger le lecteur dans un endroit o il serait expos des tempratures extrmes. vitez dutiliser ou de ranger le lecteur dans un endroit humide ou poussireux. vitez dutiliser ou de ranger le lecteur proximit daimants ou de dispositifs qui gnrent de forts champs magntiques. Nutilisez pas et ne rangez pas le lecteur dans des endroits exposs des chocs ou des vibrations. Ne dsassemblez pas ou ne dmontez pas le lecteur optique. Lusage dun nettoyant spcial pour lentilles est recommand pour lentretien du lecteur. Cartes Secure Digital Entretien de vos cartes Les cartes ExpressCard sont durables, mais vous devez en prendre soin. La documentation fournie avec votre carte vous donnera des renseignements spcifiques, mais vous devriez aussi faire attention aux points suivants :
Pour les protger de la poussire et de la salet, rangez vos cartes dans leurs tuis de protection lorsquelles nesont pas installes. vitez toute exposition prolonge aux rayons du soleil ou une chaleur excessive. Gardez les cartes au sec. Ne flchissez pas ou ne courbez pas les cartes et ny placez pas dobjet lourd. Ne faites pas entrer par force une carte dans une fente. vitez de faire tomber les cartes ou de les exposer des vibrations excessives. 84 - Entretien de votre PC Tablette Chapitre 6 Spcifications techniques Spcifications Cette partie prsente les spcifications techniques du matriel et de lenvironnement de votre PC Tablette STYLISTIC Fujitsu. Selon les configurations, les spcifications techniques peuvent varier. Microprocesseur AMD Z60 APU (avec carte graphique AMD Radeon HD 6250) Puce AMD A68M FCH Mmoire Mmoire systme Module de mmoire vive SDRAM DDR3, 1066 MHz Capacit totale de mmoire de 4 Go selon la configuration Mmoire cache Cache intgr L2 de 1 Mo 85 Vido Couleur et rsolution Vido cran IPS HD antireflets DEL rtroclair de 10,1 pouces Interne : Rsolution 1366 x 768 pixels, 16 mln couleurs HDM : Rsolution 1920 x 1080 pixels, 16 mln couleurs En simultan : Rsolution 1366 x 768 pixels, 16 mln couleurs Angle de vision verticale et horizontale de 160 Numriseur Technologie N-trig DuoSense. Numriseur double, comprenant le numriseur actif et le pav tactile technologie capacitive (impulsion par le stylo et impulsion digitale jusqu 10 doigts) Mmoire vive vido Carte graphique AMD Radeon HD 6250 Win8/Win7 (32 bits) : max 1908 Mo (hyper-mmoire) lorsque la mmoire principale est de 4 Go Win8/Win7 (64 bits) : max 1964 Mo (hyper-mmoire) lorsque la mmoire principale est de 4 Go Audio Codec Realtek ALC269 couteurs : Prise dcouteurs stro de 3,5 mm, 1 Veff. ou moins, impdance minimale de 32 ohms Deux haut-parleurs stro intgrs Deux microphones analogues doubles intgrs Options de mmoire de masse Options de disque dur Disque dur solide FDE, S-ATA/300 (3,0 Gbit/sec), 64 Go, avec soutien de commande TRIM Disque dur solide FDE, S-ATA/300 (3,0 Gbit/sec), 128 Go, avec soutien de commande TRIM Disque dur solide FDE, S-ATA/300 (3,0 Gbit/sec), 256 Go, avec soutien de commande TRIM 86 - Spcifications Rseau local sans fil : Mitsumi DMW-W095 (Broadcom: 43241) Bluetooth : Dispositif Bluetooth USB BCM20702 Broadcom pour communications personnelles sur rseau Rseau tendu sans fil : Carte de rseau tendu sans fil intgre WWAN Gobi 5000, en option Communications localsans fil
(EM7355) Fonctions de scurit Puce Trusted Platform Module (TPM) Certaines configurations du PC Tablette STYLISTIC Q584 peuvent tre dotes en option dune puce TPM pour amliorer la scurit du systme. Capteur dempreintes digitales Capteur de glissement pour scurit biomtrique. Fente pour carte SmartCard Fente intgre pour carte SmartCard (application tierce requise) Ports de priphriques Sur le PC Tablette STYLISTIC :
Emplacement pour SD Card Deux connecteurs USB 2.0 (Universal Serial Bus) pour priphriques en entre/sortie Une prise dentre c.c. Un connecteur HDMI Port de connexion ( 40 broches pour assurer la connexion avec le pidestal STYLISTIC en option) Une prise couteur stro Camra Web arrire de 5.0 mgapixels avec mise au point automatique, camra Web avant HD
(1240x720pixels) 87 - Spcifications Sur le pidestal STYLISTIC optionnel Trois connecteurs USB 2.0 pour priphriques dentre/sortie Un connecteur de rseau local Ethernet Une entre c.c. Connecteur pour duplicateur de ports (40 broches, pour arrimage au PC Tablette) Alimentation Batterie Batterie au lithium-polymre, 2 accumulateurs ; 7,2 V ; 36 WH ; 5000 mAh Adaptateur secteur Autodtection c.a. 100-240 V, fournissant c.c. de 19 V ; 3,16A ; 60W au PC Tablette, y compris un cble c.a. Gestion de lalimentation Conforme la norme ACPI (Advanced Configuration and Power Interface, ou Interface avance de configuration et de gestion de lnergie) Dimensions et poids Dimensions gnrales Environ 273,5 mm de largeur x 176 mm de profondeur x 13,6 mm dpaisseur (10,76 po x 6,93 po x 0,54 po) Poids Environ 1.65 lb (748g) Environnement dexploitation Temprature Utilisation : 5C 35C (41F 95F) Stockage : 5 140 F (-15 60 C) 88 - Spcifications Humidit Utilisation : 20 85% dhumidit relative, sans condensation Stockage : 8% 85 % dhumidit relative, sans condensation Altitude Utilisation : 3 048 m (10 000 pieds) maximum Accessoires prfrs des utilisateurs Pour commander des accessoires ou demander des informations supplmentaires, veuillez visiter notre site Internet www.shopfujitsu.com ou appelez 1-800-FUJITSU. Logiciels fournis Selon le systme dexploitation pr-install, votre PC Tablette est livr avec des logiciels inclus afin de vous permettre dcouter des fichiers audio et de visionner des fichiers vido de formats divers. De mme, lordinateur est fourni avec des logiciels de protection contre les virus et de gestion de lalimentation. La liste suivante indique les logiciels fournis avec votre systme. Adobe Reader Norton Studio Skype OmniPass (application de reconnaissance des empreintes digitales) Apprendre utiliser vos logiciels Tutoriaux Tous les systmes dexploitation et la plupart des logiciels dapplication ont des didacticiels intgrs ds leur installation. Nous vous recommandons vivement de passer en revue le tutorial avant dutiliser une application. 89 - Spcifications Guides dutilisation Sont compris dans votre PC Tablette, les guides dutilisation pour votre systme dexploitation et les autres applications pr-installes. Tous les guides dutilisation non prsents sont disponibles en ligne par lintermdiaire du systme daide du logiciel. Nous vous recommandons de passer en revue ces guides dutilisation pour obtenir des informations gnrales sur lutilisation des logiciels. Adobe Reader Adobe Reader vous permet de visualiser, de naviguer et dimprimer des fichiers pdf partir des principales plates-
formes informatiques. Norton Studio Gre avec facilit la protection Norton de vos ordinateurs et de vos priphriques directement partir de linterface mosaque Windows 8. Conu et optimis pour linterface mosaque Windows 8, Norton Studio permet de voir, contrler, rparer, actualiser et renouveler tous vos abonnements de produits Norton partir dun seul et mme cran. OmniPass (application de reconnaissance des empreintes digitales) Le capteur dempreintes digitales utilise le logiciel Softex OmniPass qui fournit des fonctions de gestion de mot de passe aux systmes dexploitation Microsoft Windows. OmniPass vous permet dutiliser un mot de passe principal, ou matre pour toutes les applications Windows et mots de passe en ligne, avec une interface dutilisateur conviviale permettant de grer en toute scurit les mots de passe, les utilisateurs et les identits multiples pour chaque utilisateur. Skype Skype permet de communiquer sur Internet par voix, vido et messagerie instantane. Skype permet de raliser des appels tlphoniques sur les rseaux de tlphonie classiques. Les appels dautres utilisateurs Skype sont gratuits, alors que les appels des tlphones fixes et des tlphones cellulaires sont facturs via un systme de comptes dutilisateur. Skype constitue galement un outil utile pour les transferts de fichiers et les tlconfrences. Systme dexploitation Votre ordinateur est quip du systme dexploitation suivant :
Microsoft Windows 8 dition Professionnelle 90 - Spcifications Renseignements sur la rglementation Avis Les changements ou modifications qui ne sont pas expressment approuvs par Fujitsu pourraient interdire aux utilisateurs dutiliser lematriel. AVIS DE LA FCC Avis aux utilisateurs de postes radio et de tlviseurs Cet appareil a t test et jug conforme aux limites tablies pour le matriel numrique de classe B, selon la Partie 15 des rglements de la FCC. Ces limites sont conues pour assurer une protection raisonnable contre les interfrences nuisibles dans un environnement rsidentiel. Cet appareil gnre, utilise et met de lnergie radiofrquence et, si son installation et son utilisation ne sont pas conformes aux instructions, il peut tre la cause de parasites nuisibles aux communications radio. Il nest toutefois pas garanti quaucune interfrence ne sera observe dans un environnement particulier. Si ce matriel cause des interfrences nuisibles la rception des ondes de radio ou de tlvision, ce qui peut tre vrifi en le mettant hors tension puis sous tension, lutilisateur devra tenter de les corriger en procdant comme suit :
Rorienter ou dplacer lantenne rceptrice. Accrotre la distance entre lappareil et le rcepteur. Brancher lappareil sur une prise relie un circuit diffrent de celui sur lequel le rcepteur est branch. Consulter le vendeur ou un technicien radio/tlvision expriment pour obtenir de laide. Des cbles de liaison paires torsades blindes doivent tre utiliss pour assurer la conformit aux limites dmission RF qui gouvernent ce dispositif. AVIS DOC (INDUSTRIE CANADA) Avis aux utilisateurs de postes radio et de tlviseurs Cet appareil numrique de classe B respecte toutes les exigences de la Rglementation canadienne sur le matriel brouilleur. Cet appareil numrique de classe B respecte toutes les exigences de la Rglementation canadienne sur le matriel brouilleur. 91 - Renseignements sur la rglementation Annexe A : Guide dutilisation de la carte de rseau local sans fil Renseignements sur la rglementation de la FCC Veuillez prendre note des renseignements suivants sur la rglementation relative la carte rseau sans fil en option. Remarques et dclarations rglementaires Sant et autorisation dutilisation Carte rseau sans fil Une carte rseau sans fil met de lnergie lectromagntique radiofrquence. Les niveaux dnergie de ces missions sont toutefois beaucoup moins levs que ceux dautres appareils sans fil, tels que les tlphones cellulaires. La carte rseau sans fil peut tre utilise en toute scurit car son fonctionnement est conforme aux recommandations et aux normes de scurit en matire de radiofrquences. Lusage dune carte rseau sans fil peut tre limit dans certaines situations ou certains environnements, notamment :
bord dun avion ;
dans un lieu contenant des matires explosives ;
dans des situations o le risque dinterfrence avec dautres appareils ou services est jug dangereux. Lorsque la politique dutilisation des cartes rseaux sans fil de certains lieux risque nest pas bien dfinie (par exemple, dans les aroports, leshpitaux, les usines de produits chimiques, les raffineries de ptrole ou de gaz et dans les difices privs), obtenez dabord une autorisation. LTIQUETTE DE LIDENTIFIANT DE PRODUIT EST SITUE DANS LE COMPARTIMENT DE LA BATTERIE. CETTE TIQUETTE PEUT TRE LUE EN RETIRANT LABATTERIE (VOIR LES INSTRUCTIONS EN PAGE 50). LTIQUETTE DIDENTIFICATION DU PRODUIT EST SITUE DANS LE COMPARTIMENT DE LA BATTERIE. POUR VOIR LTIQUETTE, RETIREZ LA BATTERIE CONFORMMENT AUX INSTRUCTIONS DE LA PAGE 50. 92 Renseignements sur la rglementation et avis de non-responsabilit Cette carte rseau sans fil doit tre installe et utilise conformment aux instructions de la documentation livre avec le produit. Toute modification apporte sans lapprobation expresse du fabricant peut annuler le droit de lutilisateur de sen servir. Le fabricant nest pas responsable des interfrences avec la rception des ondes de radio ou de tlvision causes par une modification non autorise ou par leremplacement ou le raccord de cbles et de matriel de connexion autres que ceux prescrits par le fabricant. Il incombe lutilisateur deremdier aux interfrences causes par une telle modification, substitution ou connexion non autorise. Le fabricant et ses revendeurs oudistributeurs autoriss ne peuvent tre tenus responsables des dommages ni de toute infraction la rglementation gouvernementale rsultant du non-respect de ces directives. Cet appareil ne doit pas tre utilis avec ou proximit immdiate dune antenne ou dun metteur. Avis concernant les rseaux sans fil IEEE 802.11a : Le matriel destin un usage sur la bande 5,15~5,25 GHz doit tre utilis uniquement lintrieur et son antenne doit tre intgrale. Dclarations concernant la rglementation de la FCC et Industrie Canada :
Ce matriel est conforme aux limites dfinies dans la Partie 15 des rglements de la FCC et dans les normes RSS dexemption de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisible; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. Dclaration dIndustrie Canada Cet appareil est conforme la Section 15 des Rgles de la FCC et la (aux) norme(s) RSS concernant les appareils exempts de licence par Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisible;
(2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. Dclaration concernant les dispositions de la FCC sur les interfrences Cet appareil a t test et reconnu conforme aux limites tablies pour le matriel numrique de classe B, selon la Partie 15 des rglements de la FCC. Ces limites sont conues pour assurer une protection raisonnable contre les interfrences nuisibles dans un environnement rsidentiel. Cet appareil gnre, utilise et peut mettre de lnergie radiofrquence. Sil nest pas install et utilis conformment aux instructions, il peut causer des interfrences nuisibles aux communications radio. Il nest toutefois pas garanti quaucune interfrence ne sera observe dans un environnement particulier. Si ce matriel cause des interfrences nuisibles la rception des ondes de radio ou de tlvision, ce qui peut tre vrifi en le mettant hors tension puis sous tension, lutilisateur devra tenter de les corriger en procdant comme suit :
1 Rorienter ou dplacer lantenne rceptrice. 2 loigner le matriel du rcepteur. 93 -
3 Brancher le matriel sur une prise alimente par un circuit diffrent de celui du rcepteur. 4 Consulter le vendeur ou un technicien radio/tlvision expriment pour obtenir de laide. Dclaration concernant la rglementation de la FCC/IC sur lexposition aux frquences radio Selon les donnes scientifiques disponibles, il nexiste pas de problmes de sant lis lutilisation des priphriques sans fil de faible puissance. En revanche il nexiste pas non plus de preuves qui dmontrent que ces priphriques sont absolument dpourvus de risques. Les priphriques sans fil de faible puissance mettent, lors de leur utilisation, une faible nergie de frquences radio dans la plage des micro-ondes. Alors que des niveaux levs de frquences radio risquent dentraner des effets nfastes sur la sant (en chauffant les tissus), lexposition un faible niveau de frquences radio ne provoque pas les effets calorifiques qui ont un effet adverse sur la sant. De nombreuses tudes portant sur lexposition de faibles niveaux de frquences radio nindiquent aucun effet biologique. Certaines tudes laissent entendre que des effets biologiques sont possibles, mais ces conclusions nont pas t confirmes par des recherches supplmentaires. La carte de rseau local sans fil a t teste et les rsultats obtenus sont conformes aux limites tablies par la FCC en matire dexposition au rayonnement dun quipement non contrl; ainsi que les directives de la FCC en matire dexposition aux radiofrquences selon le Supplment C du Bulletin lOET65. La norme dexposition dappliquant aux appareils de communications sans fil utilise une unit de mesure appele taux dabsorption spcifique (ou SAR en anglais). La limite SAR tablie par la FCC est de 1,6 W/kg et de 1,6 W/kg galement pour Industrie Canada. Cet appareil est conforme aux limites du taux dabsorption spcifique de la population gnrale ou des expositions non contrles (norme ANSI/IEEE C95.1-1992 et norme RSS 102 au Canada) et il a t test conformment aux mthodes de mesure et aux procdures spcifies dans le bulletin OET 65, supplment C et dans la norme canadienne RSS 102. Cet appareil a fait lobjet de tests et respecte les normes de la FCC/IC relatives lexposition aux rayonnements, lorsque les tests ont t raliss avec lappareil en contact direct avec le corps. Dclaration de la FCC/dIndustrie Canada sur lexposition aux radiofrquences La norme rgissant lexposition des appareils sans fil aux radiofrquences emploie une unit de mesure dnomme Taux dabsorption spcifique, ou TAS. La FCC et Industrie Canada ont dfini la mme limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites dexposition gnrales de la population/non contrles dfinies par les rgles C95.1-1992 de lANSI/IEEE et RSS 102 dIndustrie Canada ; il a t test en conformit avec les mthodes et procdures de mesure spcifies dans le supplment C du bulletin 65 de lOET (Office dingnierie et de technologie) et la rgle RSS 102 dIndustrie Canada. Cet appareil a t test selon les directives de la FCC et dIC concernant lexposition aux radiofrquences et sest rvl conforme ces dernires lorsquil a t test en contact direct avec le corps. 94 -
Restrictions concernant lexportation Ce produit ou logiciel contient du code de chiffrement qui ne peut tre export ou transfr du Canada ou des tats-Unis sans un permis dexportation du dpartement du commerce des tats-Unis. Ce matriel est conforme la Partie 15 des rglements de la FCC, ainsi qu lanorme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisible; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. Toute modification nayant pas t expressment approuve par la socit Fujitsu America, Inc. peut annulerledroit de lutilisateur de se servir du matriel. Avis pour le Canada Le matriel destin un usage sur la bande 5 150 - 5 250 MHz doit tre utilis uniquement lintrieur afin de rduire les risques de brouillage nuisible caus aux systmes mobiles par satellite fonctionnant sur un mme canal. Un gain dantenne de 6 dBi est autoris (pour le matriel utilisant les bandes 5 250 - 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformment la limite p.i.r.e. maximale permise selon lannexe A9.2 affrent aux priphriques RSS210. En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance sont considrs comme des utilisateurs principaux
(ce qui signifie quils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et quils pourraient causer des interfrences ou des dommages aux appareils de rseau exempts de licence. 95 -
Avant dutiliser la carte rseau sans fil en option Ce guide explique comment installer et configurer correctement la carte rseau sans fil USB intgre (disponible enoption), ci-aprs dsigne sous le nom de carte rseau sans fil . Avant dutiliser la carte rseau sans fil, lisez attentivement le prsent guide afin de bien comprendre son fonctionnement. Conservez ce guide en lieu sr afin depouvoir vous y rfrer ultrieurement. Cartes rseau sans fil prsentes dans ce document Ce document sapplique aux systmes quips du composant suivant :
Mitsumi DMW-W095 (Broadcom: 43241) Caractristiques de la carte rseau sans fil La carte rseau sans fil est un module USB connect la carte mre de lordinateur portable. Elle fonctionne dans les bandes RF pouvant tre utilises sans autorisation spciale, ce qui limine le besoin dobtenir une licence de la FCC pour les radiocommunications. Elle fonctionne dans la bande industrielle, scientifique et mdicale (ISM) de 2,4 GHz et dans les bandes UNII (Unlicensed National Information Infrastructure) infrieures, intermdiaires et suprieures (5 GHz). Les cartes rseau sans fil peuvent tre utilises selon quatre modes de fonctionnement : IEEE 802.11a, IEEE 802.11b, IEEE 802.11g et IEEE 802.11n (version prliminaire). Les cartes rseau sans fil sont certifies Wi-Fi et fonctionnent un dbit maximal thorique de 150 Mbit/s enmode IEEE 802.11n (version prliminaire), de 54 Mbit/s en mode IEEE 802.11a ou IEEE 802.11g, et de 11Mbit/s en mode IEEE 802.11b. La carte rseau sans fil prend en charge les modes de chiffrement WEP, TKIP, CKIP et AES. La carte rseau sans fil est conforme aux normes suivantes : WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, CCX4.0 etCCX5.0. 96 - Avant dutiliser la carte rseau sans fil en option Modes de rseau sans fil compatibles avec cette carte Mode Ad Hoc Le mode Ad hoc dsigne une topologie de rseau sans fil dans laquelle la connectivit entre les divers ordinateurs est tablie sans priphrique central de rseau sans fil, ou point daccs. La connectivit est tablie uniquement laide de priphriques clients dans une configuration gal gal. Les rseaux Ad hoc sont donc galement connus sous le nom de rseaux dgal gal. Un rseau Ad hoc est une mthode aise et peu coteuse de relier plusieurs ordinateurs en rseau. Le mode Ad hoc exige que les paramtres de nom de rseau SSID, dauthentification rseau et de cl de chiffrement soient configurs de faon identique sur tous les ordinateurs du rseau. Figure 23. Rseau en mode Ad hoc 97 - Avant dutiliser la carte rseau sans fil en option Mode point daccs (Infrastructure) Le mode Infrastructure dsigne une topologie de rseau sans fil dans laquelle les appareils communiquent au sein dun rseau sans fil ou cbl par lintermdiaire dun point daccs. En mode Infrastructure, les appareils sans fil peuvent communiquer directement entre eux ou sur un rseau cbl. Les rseaux sans fil dentreprise fonctionnent en mode Infrastructure car ils ncessitent une connexion au rseau local sans fil pour accder aux ordinateurs, auxpriphriques et aux services (par exemple, serveurs de fichier, imprimantes et bases de donnes). Internet Modem ADSL modem cble, ou similaire Rseau local cbl Point daccs*
Rseau local sans fil
*Un concentrateur en option pour rseau local peut tre requis selon le type de point daccs utilis. Figure 24. Rseau en mode point daccs (Infrastructure) 98 - Avant dutiliser la carte rseau sans fil en option Manipulation de la carte rseau sans fil La carte rseau local sans fil est un dispositif en option qui peut tre fourni avec votre ordinateur portable. Normalement, vous ne devriez pas avoir besoin de la retirer ou de la rinstaller. Le systme dexploitation de lordinateur est dj configur pour utiliser la carte rseau sans fil. Le rseau local sans fil fonctionne dans les modes IEEE802.11a, IEEE802.11b, IEEE802.11g et IEEE802.11n. Elles fonctionnent dans la bande ISM de 2,4 GHz et dans les bandes UNII infrieures, intermdiaires et suprieures (5 GHz). Les fours micro-ondes peuvent interfrer avec la carte rseau sans fil car ils utilisent la mme bande de frquences (2,4 GHz) que les spcifications IEEE 802.11b/g/n. Les fours micro-ondes ne causent aucune interfrence en mode IEEE 802.11a car celui-ci utilise la bande radiofrquence de 5 GHz. Les appareils sans fil qui mettent dans la bande de frquences de 2,4 GHz peuvent nuire au fonctionnement des priphriques IEEE 802.11b/g/n. Les symptmes associs aux interfrences incluent une rduction du dbit, des coupures intermittentes de connexion et un nombre important derreurs de trames. Il est FORTEMENT recommand de mettre hors tension les appareils gnrant des interfrences afin dassurer le bon fonctionnement de la carte rseau sans fil. Dsactivation/dconnexion de la carte rseau sans fil La dsactivation de la carte rseau sans fil peut tre souhaitable dans certaines circonstances (pour prolonger lavie de la batterie) ou dans des endroits o lutilisation des appareils lectroniques est rglemente (par exemple:hpitaux, cliniques, avions, etc.). La carte rseau sans fil peut tre dsactive avec le commutateur marche/arrt correspondant ou avec Windows, en utilisant licne correspondante dans la zone de notification (Remarque : cette deuxime procdure nteindra pas la radio : lmission et la rception continueront bien que la carte rseau ait t dsactive). 99 - Avant dutiliser la carte rseau sans fil en option Dsactivation avec le commutateur de la carte rseau sans fil La carte rseau sans fil peut tre rapidement et efficacement dsactive en mettant le commutateur de carte rseau sans fil la position OFF (arrt). le commutateur de la carte rseau sans fil na aucun effet sur les modles pour rseau local cbl. Interrupteur de communications sans fil Figure 25. Commutateur marche/arrt pour rseau local sans fil/Bluetooth Dsactivation par licne dans la zone de notification Notez quavec cette procdure, la radio ne sera pas teinte, lmission et la rception sont toujours actives bien que la carte ne soit plus connecte. 1 Faites un clic droit sur licne Carte rseau sans fil dans la zone de notification en bas droite de lcran. 2 Choisir Se dconnecter dun rseau. Activation de la carte rseau sans fil La carte rseau sans fil peut tre active de la mme faon que pour sa dsactivation. Avec le commutateur correspondant Sous Windows, en cliquant laide du bouton droit de la souris licne de la carte rseau sans fil puis en cliquant sur Connexion un rseau 100 - Avant dutiliser la carte rseau sans fil en option Configuration de la carte rseau sans fil La carte rseau sans fil en option peut tre configure pour tablir la connectivit du rseau sans fil en utilisant le logiciel intgr dans Windows. Ce logiciel prend galement en charge la plupart des solutions de scurit standard. Certains paramtres prdfinis seront requis pour cette procdure. Pour les obtenir, consulter votre administrateur de rseau :
Configuration de la carte de rseau local sans fil sous Windows 1 Allez lcran de dmarrage moderne, appuyez sur [Windows]+[X], puis slectionnez Panneau de configuration dans le menu. 2 Si le Panneau de configuration nest pas en affichage classique, slectionnez Basculer vers laffichage classique sur le panneau de gauche. Double-cliquez sur licne du Centre de rseau et partage. Slectionnez Configurer une nouvelle connexion ou un nouveau rseau . 3 Selon le type de connexion que vous souhaitez faire, faites une slection. Pour un rseau en mode infrastructure, slectionnez Connecter manuellement un rseau sans fil . 4 Entrez les informations requises. Pour obtenir ces renseignements, il est possible que vous deviez consulter votre administrateur de rseau. 5 Dans lventualit dun besoin daide, allez la fentre du Centre de rseau et partage (Panneau de configuration ->
Centre de rseau et partage) et entrez les mots-cls dans la bote Recherche. Se connecter un rseau Aprs avoir configur votre ordinateur, vous pouvez vous connecter un rseau actif en ralisant les tapes suivantes :
1 Cliquez sur licne de la carte rseau sans fil de la zone de notification. 2 Slectionnez Connexion un rseau . 3 Slectionnez un rseau dans la liste qui apparat et cliquez sur le bouton [Connexion]
Connexion au rseau Une fois la configuration effectue, vous pouvez vous connecter un rseau actif en cliquant sur licne Connexion rseau sans fil de la zone de notification. 101 - Configuration de la carte rseau sans fil Dpannage de la carte rseau sans fil Dpannage Le tableau ci-dessous prsente les causes possibles et les mesures correctives pour diffrents problmes de rseau sans fil. Si les tapes raliser ne vous sont pas connues, consultez votre administrateur systme ou allez dans
[Dmarrer] -> Aide et soutien (ou support) -> Gestion du rseau et Web. Problme Cause possible Solution possible Connexion rseau indisponible Nom de rseau (SSID) ou cl WEP non valide Connexion en mode Ad hoc : Assurez-vous que le SSID et la cl WEP de tous les ordinateurs du rseau ont t configurs correctement. Les noms de rseau et les valeurs de la cl WEP doivent tre identiques sur chaque ordinateur. Connexion en mode point daccs (Infrastructure) : Attribuez aux ordinateurs le mme SSID et la mme cl WEP que ceux du point daccs. Attribuez la mme valeur dauthentification rseau que celle du point daccs. Consultez votre administrateur de rseau si cette valeur est requise. Signal faible et/ou mauvaise qualit delaliaison Connexion en mode Ad hoc : Essayez de rtablir la connexion aprs avoir rapproch lordinateur ou retir les ventuels obstacles. Connexion en mode point daccs (Infrastructure) : Essayez de rtablir la connexion aprs avoir rapproch le point daccs ou retir les ventuels obstacles. La carte rseau sans filest dsactive Assurez-vous que linterrupteur de la carte rseau sans fil est sur ON. Allez lcran de dmarrage moderne->[Windows]+[X] -> Panneau de configuration, puis double-cliquez sur Centre de mobilit Windows. Si le rseau sans fil est teint, cliquez sur le bouton Allumer le rseau sans fil . Lordinateur connecter est teint Vrifiez si lordinateur est allum. 102 - Dpannage de la carte rseau sans fil Problme Cause possible Solution possible Connexion rseau indisponible
(suite) Interfrences RF provenant de points daccs ou dautres rseaux sans fil chec de lauthentification de la carte rseau sans fil. Paramtres rseau mal configurs Configuration incorrecte de ladresseIP Lutilisation de canaux RF identiques ou se chevauchant peut nuire au fonctionnement de la carte rseau sans fil. Changez le canal de votre point daccs en tenant compte du canal du priphrique nuisible. Vrifiez les paramtres dauthentification rseau, de chiffrement et de scurit. Si les paramtres de scurit sont mal configurs, en raison, par exemple, dune cl WEP comportant une faute de frappe, dun nom dutilisateur LEAP incorrect ou dun mauvais choix de mthode dauthentification, la carte rseau sans fil sassociera au rseau sans fil mais ne sy authentifiera pas. Vrifiez la configuration des paramtres rseau. Ceci sapplique uniquement aux rseaux qui utilisent des adresses IP statiques. Pour obtenir les paramtres appropris, consultez votre administrateur de rseau. 103 - Dpannage de la carte rseau sans fil Spcifications de la carte rseau sans fil Spcifications lment Type de rseau Dbit Frquence active Porte nominale**
Nombre de canaux Spcification La carte rseau sans fil intgre Ralink RT3572, IEEE 802.11a/b/g/n est conforme aux spcifications IEEE 802.11a, 802.11b/g et 802.11n, Wi-Fi*.
(Commutation automatique) dbit maximum de 150 Mbit/s 802.11n : 2,4 GHz ou 5 GHz 802.11b/g : 2 400 ~ 2 473 MHz 802.11a : 4 900 ~ 5 850 MHz 802.11a : 12 mtres (40 pi) 54 Mbit/s ; 91 mtres (300 pi) 6 Mbit/s 802.11b : 30 mtres (100 pi) 11 Mbit/s ; 91 mtres (300 pi) 1 Mbit/s 802.11g : 30 mtres (100 pi) 54 Mbit/s ; 91 mtres (300 pi) 1 Mbit/s 802.11n : selon les estimations, les portes des modes 802.11g et 802.11a, dans leurs frquences 802.11a : 8, indpendants 802.11b/g : 11, dont 3 sans chevauchement 802.11n : 2,4 GHz - 3 sans chevauchement si la liaison entre canaux nest pas utilise, 2 sans respectives, sont multiplies par deux. chevauchement si la liaison entre canaux est utilise. 5 GHz - 12 canaux UNII sans chevauchement avec ou sans utilisation de la liaison entre canaux Scurit Types de chiffrement compatible avec WEP, TKIP, AES*** et WPA 1.0 Nombre maximum recommand dordinateurs connects au rseau local sans fil (en mode Ad hoc) 10 ou moins****
*
**
Type Wi-Fi indique que le test dinterconnectivit de la Wi-Fi Alliance (organisation garantissant linterconnectivit des rseaux sans fil) a russi. La porte peut varier selon certains facteurs (par exemple, nombre de murs, rflectivit des matriaux ou interfrences provenant dautres sources de radiofrquences).
*** Le chiffrement par cl de rseau (WEP) est effectu avec le nombre de bits indiqu ci-dessus, mais lutilisateur peut dfinir une cl de 40 ou 104 bits aprs avoir soustrait la longueur fixe de 24 bits.
**** Selon lenvironnement, le nombre maximum dordinateurs peut tre infrieur. 104 - Spcifications de la carte rseau sans fil Utilisation de Bluetooth Le module Bluetooth 4.0+HS permet de communiquer rapidement et sans fil avec un autre appareil situ proximit. Prsentation de Bluetooth La technologie Bluetooth est conue pour assurer la liaison sans fil faible porte entre divers appareils mobiles, telsque tlphones, ordinateurs portables, imprimantes et camras. La technologie Bluetooth permet dtablir desrseaux personnels (PAN) entre des appareils situs courte distance les uns des autres. POUR ACTIVER OU DSACTIVER SPARMENT LA CARTE DE RSEAU LOCAL SANS FIL OU BLUETOOTH, PROCDEZ COMME SUIT :
> METTEZ LE COMMUTATEUR DE RSEAU LOCAL SANS FIL/BLUETOOTH EN POSITION DE MARCHE.
> ALLEZ LCRAN DE DMARRAGE MODERNE -> ICNES -> PARAMTRES -> MODIFIER LES PARAMTRES DE LORDINATEUR -> SANS FIL.
> SOUS SANS FIL->APPAREILS SANS FIL, CLIQUEZ SUR BLUETOOTH POUR ACTIVER CETTE FONCTION. Sources dinformations supplmentaires sur Bluetooth Pour en savoir davantage sur la technologie Bluetooth, visitez le site Web : www.bluetooth.com. 105 - Utilisation de Bluetooth nonc de la FCC relatif lexposition aux rayonnements Cet quipement respecte les normes de la FCC relatives lexposition aux rayonnements, dfinies pour un environnement non contrl. Lantenne Bluetooth est situe sur le rebord avant du repose-mains droit et est exempte des critres de distance minimale en raison de sa faible puissance. Les metteurs de ce priphrique ne doivent pas tre utiliss avec ou proximit immdiate dune antenne ou dun autre metteur. Avis pour le Canada Pour viter que ce service fourni sous licence soit perturb par des interfrences radio, ce matriel doit tre utilis lintrieur et distance des fentres. Si lquipement (ou lantenne de transmission) est install lextrieur, unelicence peut tre ncessaire. Garantie Les utilisateurs ne sont pas autoriss modifier ce produit. Toute modification annule la garantie. Cet quipement ne peut tre modifi, altr ou chang en aucune faon sans lautorisation crite de Fujitsu. Toute modification non autorise annulera les autorisations dquipement de la FCC et dIndustrie Canada, de mme que la garantie. 106 - Utilisation de Bluetooth Annexe B : Capteur dempreintes digitales Prsentation du capteur dempreintes digitales Votre systme est dot dun capteur dempreintes digitales, sur larrire de la tablette dans le coin suprieur droit. Capteur dempreintes digitales Figure 26. Capteur dempreintes digitales Grce au capteur dempreintes digitales, il nest plus ncessaire de saisir votre nom dutilisateur et votre mot de passe chaque fois que vous voulez :
Ouvrir une session dans Windows Reprendre partir du mode sommeil Annuler un conomiseur dcran protg par mot de passe Ouvrir une session dans des pages daccueil ncessitant un nom dutilisateur et un mot de passe 107 Aprs avoir inscrit ou enregistr votre empreinte digitale, il vous suffit de glisser le bout de votre doigt sur le capteur pour que le systme vous reconnaisse. Le capteur dempreintes digitales utilise le logiciel Softex OmniPass qui fournit des fonctions de gestion de mot de passe aux systmes dexploitation Microsoft Windows. OmniPass vous permet dutiliser un mot de passe principal pour tous les crans en ligne, toutes les applications Windows et dautres applications demandant un mot de passe. OmniPass demande aux utilisateurs de sauthentifier laide du capteur dempreintes digitales avant de leur donner accs au bureau Windows. Ce priphrique comporte un systme dauthentification scuris qui limite laccs votre ordinateur, vos applications, vos sites Web et aux autres ressources protges par mot de passe. OmniPass prsente une interface graphique conviviale, qui permet de grer de faon scuritaire les mots de passe, les comptes utilisateur et les identits multiples pour chaque utilisateur. Guide dintroduction Cette section vous montre comment prparer votre systme linstallation de lapplication de reconnaissance dempreintes digitales OmniPass. Vous y trouverez des conseils qui vous guideront au long de la procdure dinstallation. Elle indique galement de faon dtaille comment enregistrer votre premier utilisateur dans OmniPass. Installation dOmniPass Si lapplication OmniPass a dj t installe sur votre systme, sautez cette section et allez directement Enregistrement des utilisateurs en page 111. Vous pouvez dterminer si lapplication OmniPass a dj t installe en vrifiant si licne OmniPass en forme de cl dore est visible dans la zone de notification, en bas droite de lcran. Configuration de systme ncessaire Lapplication OmniPass ncessite de lespace sur votre disque dur ainsi quun systme dexploitation (SE) spcifique. Les exigences minimales sont les suivantes :
Systme dexploitation Windows XP Professionnel ou ultrieur Au moins 35 Mo despace disque disponible 108 - Prsentation du capteur dempreintes digitales Installation de lapplication OmniPass Si lapplication OmniPass est dj installe sur votre systme, allez directement Enregistrement des utilisateurs en page 111. Autrement, continuez suivre les instructions de cette section concernant linstallation du logiciel. POUR INSTALLER LE LOGICIEL, VOUS DEVEZ AVOIR UN LECTEUR OPTIQUE EXTERNE RACCORD VOTRE ORDINATEUR. LUTILISATEUR DSIRANT INSTALLER OMNIPASS DOIT DISPOSER DE DROITS DADMINISTRATEUR DANS LE SYSTME. SI VOUS NAVEZ PAS DE TELSDROITS, FERMEZ LA SESSION ET OUVREZ-EN UNE AUTRE AVEC UN NOM DUTILISATEUR POSSDANT CES DROITS AVANT DE POURSUIVRE LINSTALLATION DOMNIPASS. Pour installer OmniPass dans votre systme, vous devez excuter les oprations suivantes :
1 Insrez le disque dinstallation de lapplication OmniPass dans le lecteur appropri. Si vous installez OmniPass partir dun CD-ROM ou dun DVD-ROM, vous devez trouver et lancer le programme dinstallation (setup.Exe) setrouvant sur le disque. 2 Suivez les instructions figurant dans le programme dinstallation. Indiquez lendroit o vous souhaitez installer OmniPass. Il est recommand de NE PAS installer lapplication dans le rpertoire racine (par exemple : C:\). 3 Une fois linstallation dOmniPass termine, vous serez invit redmarrer votre systme. Vous pourrez ensuite utiliser OmniPass. Si vous dcidez de ne pas redmarrer votre systme immdiatement aprs linstallation, OmniPass ne sera pas disponible avant le prochain redmarrage. 4 Le programme dinstallation place automatiquement une icne (Softex OmniPass) dans le panneau de configuration Windows, ainsi quune icne dore en forme de cl dans la zone de notification. Vrification des informations concernant votre version dOmniPass Aprs avoir install OmniPass et redmarr votre systme, vous pouvez dcider de vrifier la version du logiciel. Pour vrifier votre version dOmniPass :
109 - Prsentation du capteur dempreintes digitales 1 Double-cliquez sur licne en forme de cl OmniPass de votre barre de tches Windows (gnralement en bas droite de lcran), ou Cliquez sur lcran Dmarrage moderne -> [Windows]+[X], puis cliquez sur Panneau de configuration. Double-
cliquez sur OmniPass dans le panneau de configuration et vous verrez apparatre le Centre de contrle OmniPass. Sil ne saffiche pas, cela signifie que le programme nest pas install correctement. 2 Slectionnez longlet propos de en haut du Centre de contrle OmniPass. Une fentre indiquant la version du logiciel OmniPass apparat. LUTILISATEUR DSIRANT DSINSTALLER OMNIPASS DOIT DISPOSER DE DROITS DADMINISTRATEUR DANS LE SYSTME. SI VOUS NAVEZ PAS DE TELSDROITS, FERMEZ LA SESSION ET OUVREZ-EN UNE AUTRE AVEC UN NOM DUTILISATEUR POSSDANT CES DROITS AVANT DE POURSUIVRE LA DSINSTALLATION DOMNIPASS. Dsinstallation dOmniPass Pour supprimer lapplication OmniPass de votre systme :
1 Cliquez sur Dmarrer dans la barre des tches. Slectionnez Paramtres, puis Panneau de configuration. 2 Double-cliquez sur Ajouter ou supprimer des Programmes. 3 Slectionnez OmniPass, puis cliquez sur Modifier/Supprimer. 4 Suivez les instructions de dsinstallation de lapplication OmniPass. 5 Aprs la dsinstallation dOmniPass, redmarrez votre systme lorsque vous y tes invit. 110 - Prsentation du capteur dempreintes digitales Enregistrement des utilisateurs Avant de pouvoir utiliser les fonctions dOmniPass, vous devez enregistrer un utilisateur dans ce programme. Concept du mot de passe principal Les ressources dun ordinateur sont souvent protges par des mots de passe. Lorsque vous vous connectez votre ordinateur, que vous consultez vos courriels, que vous effectuez des oprations bancaires sur Internet, que vous payez des factures en ligne ou que vous accdez aux ressources dun rseau, il vous est souvent demand de vous identifier. Il se peut alors que vous ayez besoin de dizaines de mots de passe dont vous devez vous rappeler. Lors de lenregistrement dun utilisateur, un mot de passe principal est cr son intention. Ce mot de passe remplace tous les autres mots de passe des sites sur lesquels lutilisateur senregistre avec OmniPass. Exemple : Un utilisateur, Jean, installe OmniPass sur son systme (son ordinateur de maison) et inscrit un utilisateur OmniPass avec le nom dutilisateur Jean_01 et mot de passe freq14 . Il se rend ensuite sur son site Internet de courriel pour ouvrir une session dans son compte. Il entre, comme dhabitude, son nom dutilisateur et son mot de passe (par exemple, Jean_02 et STYLISTIC ), mais demande OmniPass de Mmoriser le mot de passe au lieu de cliquer sur [Envoyer]. Dornavant, chaque fois quil retournera sur ce site, OmniPass linvitera fournir ses informations didentification. Jean saisira alors les informations OmniPass ( Jean_01 et freq14 ) dans linvite dauthentification dOmniPass et pourra accder son compte de courriel. Il peut rpter cette opration avec autant de sites Web ou de ressources protges par mot de passe quil le souhaite et pourra accder tous ces sites laide de ses informations didentification dutilisateur OmniPass ( Jean_01 et freq14 ). Pour ce faire, il devra utiliser le systme sur lequel il sest enregistr titre dutilisateur OmniPass. En fait, OmniPass ne change pas les informations didentification de la ressource protge par mot de passe. Si Jean veut accder son courriel depuis un ordinateur sur lequel le compte OmniPass nexiste pas, il devra saisir ses informations didentification originales ( Jean_02 et STYLISTIC ). Dans ce cas, sil tente dutiliser ses informations didentification OmniPass, laccs au site lui sera refus. CETTE PROCDURE DENREGISTREMENT REPOSE SUR LHYPOTHSE QUE VOUS NE VOULEZ INTGRER OMNIPASS AUCUN PRIPHRIQUE DAUTHENTIFICATION OU AUTRE EMPLACEMENT DE STOCKAGE. SI VOUS SOUHAITEZ DISPOSER DE CETTE FONCTIONNALIT, CONSULTEZ LESSECTIONSCORRESPONDANTES DU PRSENT DOCUMENT. 111 - Prsentation du capteur dempreintes digitales Enregistrement de base LAssistant denregistrement vous guidera travers les tapes denregistrement dun utilisateur. Sauf indication contraire de votre part, lAssistant denregistrement sera lanc aprs linstallation dOmniPass au moment de louverture dune session Windows. Si V.ous ne voyez pas lAssistant denregistrement, vous pouvez lafficher en accdant OmniPass via le Panneau de configuration. 1 Cliquez sur Enregistrement pour procder la vrification de lutilisateur et du mot de passe. Par dfaut, lAssistant denregistrement entre les informations didentification de lutilisateur Windows actuellement connect. 2 Entrez le mot de passe qui vous sert ouvrir une session dans Windows. Il deviendra le mot de passe principal de cet utilisateur OmniPass. Dans la plupart des cas, la valeur de Domaine : correspondra au nom de votre ordinateur Windows. Dans un environnement dentreprise, ou lorsque vous accdez des ressources professionnelles, il se peut que Domaine : ne corresponde pas au nom de votre ordinateur. Cliquez sur [Suivant] pour continuer. 3 Au cours de cette tape, OmniPass prend votre empreinte digitale. Pour de plus amples informations, reportez-
vous Capteur dempreintes digitales en page 112. 4 Ensuite, choisissez comment OmniPass doit vous avertir de diffrents vnements. Nous vous recommandons de laisser Astuces de la barre de tches sur Astuces de la barre des tches en mode dbutant et Invites audio sur au moins Invite avec signaux sonores uniquement, jusqu ce que le fonctionnement dOmniPass vous soit familier. Cliquez sur [Suivant] pour continuer la procdure denregistrement de lutilisateur. Un cran de flicitations, indiquant que lenregistrement de lutilisateur est termin, apparatra. 5 Cliquez sur [Termin] pour quitter lassistant denregistrement. Il vous sera demand si vous voulez vous connecter OmniPass avec les informations dutilisateur nouvellement enregistres. Cliquez sur [Oui]. Capteur dempreintes digitales Lenregistrement dune empreinte digitale augmentera la scurit de votre systme et simplifiera la procdure dauthentification. 112 - Prsentation du capteur dempreintes digitales Lenregistrement des empreintes digitales se fait partir du Centre de contrle OmniPass. Aprs vous tre connect titre dutilisateur OmniPass, faites un double clic sur licne OmniPass dans la zone de notification. Slectionnez longlet Paramtres utilisateur, puis cliquez sur Enregistrement dans la zone Paramtres utilisateur. Cliquez surEnregistrer le priphrique dauthentification et authentifiez-vous linvite dauthentification dOmniPass. Lesystme ouvre la procdure denregistrement du priphrique. 1 Pendant la procdure denregistrement initial de lutilisateur, vous serez invit slectionner le doigt qui sera enregistr. Les doigts dj enregistrs seront marqus dun crochet vert. Le doigt slectionn pour lenregistrement sera marqu dune flche rouge. OmniPass vous permet de renregistrer un doigt. Si vous choisissez un doigt qui a dj t enregistr et que vous poursuivez la procdure denregistrement, OmniPass enregistre lempreinte digitale actuelle la place de lancienne empreinte. Slectionnez un doigt enregistrer et cliquez sur [Suivant]. 2 Il est temps pour OmniPass de prendre lempreinte que vous avez choisie. Plusieurs tentatives peuvent tre ncessaires avant quOmniPass prenne votre empreinte digitale. Si OmniPass ny parvient pas ou si lcran de capture de lempreinte digitale expire, cliquez sur [Prcdent] pour redmarrer le processus denregistrement dempreinte digitale. Votre systme est quip dun capteur dempreintes digitales glissement . Les capteurs glissement sont de taille rduite et ressemblent un mince rectangle allong. Pour prendre une empreinte digitale, faites glisser ou tirez doucement vers vous le bout de votre doigt sur le capteur ( partir de la deuxime articulation). Un glissement trop rapide ou trop lent pourrait faire chouer la prise dempreintes. Lcran Choisir un doigt dispose dun bouton
[Pratique] ; cliquez dessus pour pratiquer la prise de votre empreinte digitale. Lorsque vous matrisez la prise dempreintes digitales, vous pouvez procder lenregistrement dun doigt. 3 Lorsque OmniPass a correctement pris lempreinte digitale, lcran Vrifier lempreinte digitale saffiche automatiquement. Pour vrifier lenregistrement de votre empreinte, placez le bout de votre doigt sur le capteur comme lors dune prise dempreinte digitale. Si lempreinte a t vrifie avec succs, une empreinte digitale verte apparat dans la fentre de prise et le texte Vrification russie saffiche en dessous. 113 - Prsentation du capteur dempreintes digitales Utilisation dOmniPass Vous pouvez maintenant commencer utiliser OmniPass. Son utilisation rgulire vous permettra de simplifier vos procdures dauthentification. Remplacement du mot de passe Vous utiliserez souvent la fonction de remplacement du mot de passe. Lorsque vous allez sur un site Internet accs restreint (par exemple, de votre banque, de votre courrier lectronique, de paiement ou denchres en ligne), vous serez toujours invit entrer vos rfrences de connexion. OmniPass peut dtecter ces invites et vous pouvez lui enseigner enregistrer vos rfrences. La prochaine fois que vous visiterez un de ces sites, vous pourrez vous authentifier laide de votre empreinte digitale pour y accder. Barre doutils dauthentification OmniPass Aprs avoir install OmniPass et redmarr votre ordinateur, vous remarquerez la prsence dune nouvelle bote dedialogue au dbut de votre session Windows. Il sagit de la barre doutils dauthentification OmniPass. Celle-ci saffiche chaque fois que le systme dauthentification est appel. Ce systme peut tre appel frquemment :
pendant louverture dune session Windows, lors de la connexion OmniPass, lorsque vous dverrouillez votre poste de travail, lorsque vous reprenez le systme depuis le mode sommeil ou veille prolonge, lorsque vous dverrouillez un conomiseur dcran activ par mot de passe, lors du remplacement du mot de passe dun site mmoris ou des noms de connexion dapplications, etc. Lorsque cette barre doutils saffiche, OmniPass vous invite vous authentifier. La fentre Authentification de la connexion indique la fonction restreinte par OmniPass laquelle vous tentez de vous connecter. Les icnes en bas gauche (empreinte digitale et cl) indiquent les mthodes dauthentification disponibles. Les mthodes slectionnes sont en surbrillance, contrairement aux mthodes non slectionnes. Lorsque vous cliquez sur licne pour obtenir une mthode dauthentification non slectionne, linvite dauthentification associe cette mthode saffiche. linvite dauthentification, vous devez fournir les informations didentification appropries : un doigt enregistr dans la fentre dempreintes digitales ou votre mot de passe principal dans la case de mot de passe principal (licne en forme de cl). 114 - Prsentation du capteur dempreintes digitales Mmorisation dun mot de passe OmniPass peut mmoriser toute application, toute interface graphique ou toute autre ressource protge par un mot de passe. laide de la procdure suivante, vous pourrez sauvegarder dans OmniPass toutes les informations permettant de vous identifier. Ces informations seront ensuite associes votre mot de passe principal ou votre empreinte digitale. Allez sur un site comportant une procdure de connexion (nom dutilisateur et mot de passe), mais ne vous connectez pas tout de suite. linvite de connexion au site, entrez votre nom dutilisateur et votre mot de passe dans les champs appropris, mais nentrez pas sur le site (nappuyez pas sur [Entrer], [Soumettre], [OK], ou Connexion). Cliquez avec le bouton droit de la souris sur licne OmniPass de la zone de notification et slectionnez Mmoriser le mot de passe dans le sous-menu. Le curseur flch Windows devient un curseur OmniPass en forme de cl dore. Cliquez sur ce curseur dans la zone dinvite de connexion, mais ne cliquez pas sur le bouton [Connexion] ou [Envoyer]. Association dun nom convivial Aprs avoir cliqu sur le curseur en forme de cl prs de linvite de connexion, OmniPass vous invitera entrer un nom convivial pour ce site. Vous devez entrer un terme qui vous rappelle le site Internet, la socit ou le service auquel vous vous connectez. Dans sa base de donnes scurise, OmniPass associe ce nom convivial au site Internet. Paramtres supplmentaires pour mmoriser un site Lorsque vous tes invit entrer un nom convivial , vous pouvez dfinir la manire dont OmniPass vous authentifie sur ce site. Trois choix sont votre disposition pour chaque site mmoris par OmniPass. Le paramtre par dfaut est Cliquer automatiquement sur le bouton OK ou Soumettre pour ce site protg par mot de passe une fois lutilisateur authentifi. Avec ce paramtre, chaque fois que vous accdez ce site, OmniPass vous demandera votre mot de passe principal ou votre priphrique dauthentification dempreintes digitales. Lorsque votre authentification est complte par OmniPass, vous tes automatiquement connect au site. 115 - Prsentation du capteur dempreintes digitales La deuxime option est moins scuritaire : Entrer automatiquement sur ce site protg par mot de passe lorsquil est activ. Ne pas demander dauthentification. Cochez la case suprieure pour slectionner ce choix. Ensuite, chaque fois que vous vous connectez ce site, OmniPass vous donnera accs sans vous demander de vous authentifier. CE PARAMTRE EST PLUS PRATIQUE CAR DS QUE VOUS DEMANDEZ UN SITE QUI Y EST ASSOCI, VOUS SAUTEZ LA PROCDURE DAUTHENTIFICATION ET VOUS ACCDEZ INSTANTANMENT AU SITE. CEPENDANT, SI VOUS LAISSEZ VOTRE ORDINATEUR SANS SURVEILLANCE AVEC VOTRE CONNEXION OMNIPASS ACTIVE, TOUTE PERSONNE UTILISANT VOTRE SYSTME PEUT ENTRER SUR LES SITES PROTGS EN USURPANT VOTRE IDENTIT. Si vous dslectionnez les deux cases dans Paramtres pour ce site protg par mot de passe, OmniPass vous demande votre mot de passe principal ou votre priphrique dauthentification. Lorsque votre authentification est complte par OmniPass, vos informations didentification saffichent linvite de connexion du site. Toutefois, vous devez cliquer sur le bouton [OK], [Envoyer] ou [Connexion] pour accder au site. Cliquez sur Terminer pour achever la procdure de mmorisation du mot de passe. Lemplacement du site, les informations didentification pour y accder et les paramtres dauthentification OmniPass correspondant ce site sont dsormais sauvegards dans la base de donnes scurise dOmniPass. Les paramtres dauthentification dOmniPass
(Paramtres pour ce site protg par mot de passe) peuvent toujours tre modifis dans Gestion du coffre-fort. Connexion un site mmoris Selon les informations contenues dans Paramtres pour ce site protg par mot de passe, OmniPass vous invitera ou non vous authentifier lorsque vous retournerez un site mmoris. Ces informations peuvent tre modifies dans Gestion du coffre-fort. Les cas suivants sappliquent lutilisation dOmniPass pour se connecter : Windows, aux sites mmoriss et toutes les autres ressources protges par mot de passe. Avec mot de passe principal Lorsque vous retournez un site mmoris avec OmniPass, il se peut que le systme vous demande un mot de passe principal. Entrez votre mot de passe principal et vous serez autoris accder au site. 116 - Prsentation du capteur dempreintes digitales Connexion Windows avec un capteur dempreintes digitales Lorsque vous vous connectez Windows laide dun capteur dempreintes, la fentre de prise dempreintes digitales apparat ct de lcran de connexion Windows. Placez votre doigt enregistr sur le capteur pour que le systme vous identifie. Vous serez simultanment connect Windows et OmniPass. La fentre de prise dempreinte saffiche galement si vous avez utilis Ctrl-Alt-Suppr/bouton Windows + bouton dalimentation afin de verrouiller le systme. En outre, le capteur dempreintes peut tre utilis pour vous reconnecter, comme indiqu ci-dessus. SI UN ORDINATEUR EST VERROUILL ET QUOMNIPASS DTECTE UN UTILISATEUR DIFFRENT SE RECONNECTANT AVEC SON EMPREINTE DIGITALE, LEPREMIER UTILISATEUR SERA DCONNECT ET LE SECOND CONNECT. Gestion des mots de passe OmniPass propose une interface qui vous permet de grer vos mots de passe. Pour accder cette interface graphique, cliquez deux fois sur la cl OmniPass dans la zone de notification. Cliquez sur Gestion du coffre-fort; vous serez invit vous authentifier. Lorsque vous avez accd Gestion du coffre-fort, cliquez sur Grer les mots de passe sous Paramtres du coffre-fort. Linterface Grer les mots de passe apparat avec une liste de noms conviviaux. Si vous dsirez afficher les informations didentification sauvegardes pour un site Internet mmoris, mettez en surbrillance la ressource souhaite sous Bote de dialogue Protection par mot de passe et cliquez sur Afficher lesvaleurs. En cas de rinitialisation dun mot de passe ou dexpiration dun compte, vous pouvez supprimer les informations didentification sauvegardes dans OmniPass. Mettez en surbrillance la ressource souhaite sous Botede dialogue Protection par mot de passe, puis cliquez sur Supprimer la page. Vous serez invit confirmer la suppression du mot de passe. Les deux cases cocher dans Grer les mots de passe dterminent si OmniPass vous invite vous authentifier ou vous connecte directement au site mmoris. Si vous tentez dutiliser Mmoriser le mot de passe sur un site dj connu, OmniPass efface les anciennes informations didentification. 117 - Prsentation du capteur dempreintes digitales Le remplacement de votre mot de passe Windows constitue lexception la rgle ci-dessus. Si votre mot de passe estrinitialis dans Windows, le changement sera dtect par OmniPass qui vous invitera Mettre jour ou Reconfirmer le mot de passe. Entrez votre nouveau mot de passe Windows dans linvite, puis cliquez sur OK. Votremot de passe principal Omnipass sera toujours votre mot de passe Windows. Identits dutilisateur OmniPass Les identits permettent aux utilisateurs OmniPass de possder plusieurs comptes sur un mme site (par exemple, claude@biblomail.com et claudepicard@biblomail.com). Si OmniPass ne vous a pas fourni didentits, vous ne pourrez mmoriser quun seul compte par site. Pour crer et grer des identits, cliquez deux fois sur la cl OmniPass dans la zone de notification. Cliquez sur Gestion du coffre-fort. OmniPass vous invite vous authentifier. Lorsque vous avez accd Gestion du coffre-fort, cliquez sur Grer les identits sous Paramtres du coffre-fort. Vous pouvez seulement grer les identits de lutilisateur OmniPass actuellement connect. Pour ajouter une nouvelle identit, cliquez sur Nouvelle identit ou double-cliquez sur Cliquer ici pour ajouter une nouvelle identit. Nommez la nouvelle identit et cliquez sur [OK], puis sur [Appliquer]. Vous pouvez dsormais basculer vers la nouvelle identit et dmarrer la mmorisation des mots de passe. Pour supprimer une identit, mettez en surbrillance lidentit supprimer et cliquez sur [Supprimer lidentit], puis cliquez sur [Appliquer]. LORSQUE VOUS SUPPRIMEZ UNE IDENTIT, TOUS LES SITES MMORISS ET LES BOTES DE DIALOGUE PROTECTION PAR MOT DE PASSE ASSOCIS LIDENTIT SONT PERDUS. Pour dfinir lidentit par dfaut, mettez en surbrillance lidentit souhaite puis cliquez sur [Dfinir par dfaut] et cliquez sur [Appliquer] pour vrifier que les paramtres sont bien enregistrs. Si vous accdez OmniPass laide dun capteur dempreintes digitales, vous serez automatiquement connect lidentit par dfaut de lutilisateur OmniPass associ lempreinte. Si vous utilisez la procdure de connexion laide du mot de passe principal , vouspouvez choisir lidentit avec laquelle vous vous connectez. 118 - Prsentation du capteur dempreintes digitales Choix de lidentit de lutilisateur lors de la connexion Pour choisir votre identit lors de la connexion, tapez votre nom dutilisateur dans le champ Nom dutilisateur :
Appuyez sur [Tab] et assurez-vous que le champ Domaine : se remplit automatiquement. Cliquez sur le champ Mot de passe : pour pointer le curseur dessus et vous verrez le menu droulant dans le champ Identit : Slectionnez lidentit souhaite puis cliquez sur OK. Changement didentit de lutilisateur Pour changer les identits tout moment, cliquez avec le bouton droit de la souris sur licne OmniPass dans la zone de notification, puis cliquez sur Changer lidentit de lutilisateur dans le sous-menu. La bote de dialogue Changer didentit apparat. Slectionnez lidentit souhaite puis cliquez sur OK. Gestion des mots de passe et des identits Sur linterface Grer les mots de passe de longlet Gestion du coffre-fort du Centre de contrle OmniPass, il existe une liste de slection droulante nomme Identit. Ce champ vous permet de choisir lidentit pour laquelle vous dsirez grer les mots de passe. Lorsque vous slectionnez une identit dans cette liste, le systme affiche seulement les botes de dialogue Protection par mot de passe associes cette identit. Vous pouvez effectuer toutes les fonctions expliques dans Gestion des mots de passe en page 117. Configuration dOmniPass Cette section vous donne un aperu de la fonction Exportation/Importation et du Centre de contrle OmniPass. Exportation et importation dutilisateurs VOUS NE POUVEZ PAS IMPORTER UN UTILISATEUR DANS OMNIPASS SI UN UTILISATEUR PORTANT LE MME NOM Y EST DJ ENREGISTR. 119 - Prsentation du capteur dempreintes digitales Vous pouvez importer et exporter des utilisateurs dans et hors dOmniPass laide du Centre de contrle. Le processus dexportation permet de sauvegarder tous les sites mmoriss, les informations didentification et les empreintes enregistres dun utilisateur OmniPass. Toutes les donnes OmniPass dun utilisateur sont sauvegardes dans un fichier de base de donnes crypt unique. Durant le processus dimportation, vous devez utiliser les informations de connexion Windows de lutilisateur export. Si les informations didentification appropries ne sont pas fournies, le profil utilisateur ne sera pas import. VOUS DEVEZ EXPORTER PRIODIQUEMENT VOTRE PROFIL UTILISATEUR ET LE SAUVEGARDER DANS UN ENDROIT SR. SIL DEVAIT ARRIVER QUELQUE CHOSE VOTRE SYSTME, VOUS POUVEZ IMPORTER VOTRE PROFIL OMNIPASS SUR UN NOUVEAU SYSTME ET DISPOSER INSTANTANMENT DE TOUS VOS PARAMTRES ET EMPREINTES DIGITALES MMORISS. NOUBLIEZ PAS VOS INFORMATIONS DIDENTIFICATION WINDOWS UTILISES LORS DE LEXPORTATION. LORSQUE VOUS PROCDEZ LIMPORTATION DUN PROFIL UTILISATEUR, OMNIPASS VOUS INVITE VOUS AUTHENTIFIER. LES INFORMATIONS DIDENTIFICATION PERMETTANT DIMPORTER UN PROFIL SONT LES RFRENCES DE CONNEXION WINDOWS DE LUTILISATEUR EXPORT. CES RFRENCES SONT CELLES QUIL FALLAIT SOUMETTRE LORSQUE LE PROFIL DUTILISATEUR A T EXPORT. VOUS AUREZ BESOIN DU NOM DUTILISATEUR, DU MOT DE PASSE ET DU DOMAINE. Exporter un profil dutilisateur OmniPass Pour exporter un profil utilisateur, ouvrez le Centre de contrle OmniPass et cliquez sur Importer/exporter un utilisateur sous Grer les utilisateurs. Cliquez sur Exporter un profil utilisateur OmniPass. OmniPass vous invitera vous authentifier. Une fois lauthentification russie, vous devez nommer le profil utilisateur OmniPass et dcider o lenregistrer. Un fichier .opi est gnr et vous devez en sauvegarder une copie dans un endroit sr. Ce fichier .opi contient toutes vos donnes dutilisateur OmniPass. Il est crypt et protg par mot de passe. Ce profil utilisateur ne contient AUCUN de vos fichiers de donnes crypts. 120 - Prsentation du capteur dempreintes digitales Importer un profil dutilisateur OmniPass Pour importer un profil utilisateur, ouvrez le Centre de contrle OmniPass et cliquez sur [Importer/exporter un utilisateur]
sous Grer les utilisateurs. Cliquez sur [Importer un nouvel utilisateur dans OmniPass], slectionnez Fichier dimportation/
exportation OmniPass (*.opi) puis cliquez sur [Suivant]. OmniPass vous invite ensuite rechercher le fichier export auparavant (fichier .opi). Lorsque vous slectionnez le fichier .opi pour limporter, OmniPass vous invite vous authentifier. Les informations didentification permettant dimporter un profil sont les rfrences de connexion Windows de lutilisateur export. Ces rfrences sont celles quil fallait soumettre lorsque le profil dutilisateur a t export. Vous aurez besoin du Nom dutilisateur, du Mot de passe et du Domaine. Si vous avez oubli la valeur pour Domaine, celle-ci doit correspondre au nom de votre ordinateur dans un environnement PC ou SOHO. OmniPass vous informe si le profil utilisateur a t correctement import. Informations importantes sur les oprations dimportation et dexportation Supposons que vous exportez un profil dutilisateur Windows local depuis OmniPass. Vous voulez importer ce profil sur un autre ordinateur dot dOmniPass. Avant de pouvoir importer le profil, un utilisateur Windows avec les mmes rfrences de connexion doit tre cr sur lordinateur important le profil. Exemple : Jai un utilisateur Windows avec le nom dutilisateur Thomas et le mot de passe Soleil sur mon systme. Jai enregistr Thomas dans OmniPass et mmoris des mots de passe. Je veux transfrer tous mes mots de passe vers le nouveau systme. Jexporte le profil utilisateur OmniPass de Thomas. Jaccde mon nouveau systme et laide du panneau de configuration, je cre un utilisateur avec le nom dutilisateur Thomas et le mot de passe Soleil . Je peux maintenant importer les donnes utilisateur OmniPass dans lenouveau systme. Si vous exportez un utilisateur propre OmniPass, vous pouvez importer cet utilisateur dans tout ordinateur excutant OmniPass, condition quun utilisateur portant le mme nom ny soit pas dj enregistr. Si vous tentez dimporter un profil utilisateur portant le mme nom quun utilisateur dj enregistr dans OmniPass, le processus dimportation choue. 121 - Prsentation du capteur dempreintes digitales Centre de contrle OmniPass Cette section a pour but de prsenter les fonctions du Centre de contrle OmniPass qui nont pas t expliques auparavant. Vous pouvez accder au Centre de contrle OmniPass de trois faons :
Double-cliquez sur licne OmniPass en forme de cl dore dans la zone de notification Windows
(gnralement situe dans le coin infrieur droit du bureau). Cherchez OminiPass avec loutil de recherche Windows 8 accessible depuis le tableau Icnes Ouvrez le Panneau de configuration Windows (accessible partir de lcran Dmarrage moderne->
(boutonWindows+ 8)
[Windows]+[X] -> Panneau de configuration) et double-cliquez sur licne OmniPass. Gestion des utilisateurs Longlet Gestion des utilisateurs comporte deux interfaces principales : Ajouter/supprimer un utilisateur et Importer/exporter un utilisateur. La fonctionnalit Importer/exporter un utilisateur est explique dans Exportation et importation dutilisateurs en page 119. La fonctionnalit Ajouter/supprimer un utilisateur est explicite. Si vous cliquez sur Ajouter un nouvel utilisateur OmniPass, vous dmarrez lAssistant denregistrement OmniPass. LAssistant denregistrement est expliqu dans Enregistrement des utilisateurs en page 111. Si vous cliquez sur Supprimer un utilisateur OmniPass, vous tes invit vous authentifier. Authentifiez-vous laide des informations didentification (ou de lempreinte digitale enregistre) de lutilisateur supprimer. OmniPass vous invite confirmer la suppression de lutilisateur. Cliquez sur OK pour terminer le processus de suppression. LA SUPPRESSION DUN UTILISATEUR DTRUIT AUTOMATIQUEMENT TOUTES LES DONNES OMNIPASS ASSOCIES CET UTILISATEUR. TOUTESLESIDENTITS ET TOUTES LES INFORMATIONS DIDENTIFICATION DE LUTILISATEUR SERONT PERDUES. SI VOUS TES CERTAIN DE DEVOIR SUPPRIMER LUTILISATEUR, NOUS VOUS RECOMMANDONS DEXPORTER LE PROFIL UTILISATEUR. 122 - Prsentation du capteur dempreintes digitales Paramtres utilisateur Longlet Paramtres utilisateur comporte quatre interfaces : Paramtres audio, Astuces de la barre de tches etEnregistrement. Les paramtres utilisateur vous permettent de personnaliser OmniPass pour rpondre vos prfrences. Sous Paramtres utilisateur (Paramtres audio et Astuces de la barre de tches), vous pouvez configurer la manire dont OmniPass vous informe des vnements dOmniPass (par exemple, connexion russie, accs refus, etc.). Les dtails de chaque paramtre sous les interfaces Paramtres audio et Astuces de la barre des tches sont explicites. Linterface Enregistrement vous permet denregistrer des empreintes digitales. Si vous dsirez des informations sur la procdure denregistrement dun priphrique dauthentification, reportez-vous au Chapitre 2.3. Pour enregistrer des empreintes digitales supplmentaires, cliquez sur Enregistrer un priphrique dauthentification et authentifiez-vous dans OmniPass. Slectionnez le priphrique de reconnaissance dempreintes digitales dans lcran Slectionner un priphrique dauthentification (il doit tre dj marqu dune coche verte si vous avez enregistr un doigt), puis cliquez sur Suivant. Paramtres de systme Vous trouverez linterface Options de dmarrage dans longlet Paramtres de systme . Les options de cette interface vous permettent de spcifier la manire dont votre ouverture de session OmniPass est associe votre ouverture de session Windows. La premire option, Se connecter automatiquement OmniPass en tant quutilisateur actuel, est explicite. Lorsde louverture dune session Windows, vous tes connect OmniPass laide de vos rfrences de connexion Windows. Si lutilisateur ouvrant une session Windows na jamais t enregistr dans OmniPass, personne nest connect OmniPass au moment de la connexion. Ce paramtre convient une configuration de bureau ou toute configuration ncessitant la saisie dun nom dutilisateur et dun mot de passe pour utiliser lordinateur. Il sagit du paramtre par dfaut. Avec la deuxime option, Se connecter manuellement OmniPass au dmarrage, OmniPass vous invite vous connecter une fois que vous avez ouvert une session Windows. Si vous choisissez la troisime option, Ne pas se connecter OmniPass au dmarrage, OmniPass ninvite pas lutilisateur se connecter. 123 - Prsentation du capteur dempreintes digitales Vous pouvez vous connecter manuellement OmniPass en cliquant avec le bouton droit de la souris sur licne dOmniPass dans la zone de notification et sur Connecter lutilisateur dans le menu gnr. Dpannage Vous ne pouvez pas utiliser OmniPass pour crer des utilisateurs Windows. Vous devez dabord crer lutilisateur Windows, ce qui ncessite des droits dadministrateur. Une fois lutilisateur Windows cr, vous pouvez lajouter dans OmniPass avec le mme nom dutilisateur et le mme mot de passe. Impossible dajouter des utilisateurs Windows dans OmniPass Si vous rencontrez des difficults pour ajouter un utilisateur Windows dans OmniPass, vous devrez peut-tre modifier vos paramtres de scurit locale. Pour ce faire, allez lcran Dmarrage moderne->[Windows]+[X], Panneau de configuration, Outils dadministration et Paramtres de scurit locale. Ouvrez Stratgies locales et Options de scurit, puis double-cliquez sur Accs rseau : Modle de partage et de scurit pour les comptes locaux. La configuration correcte doit tre Classique Les utilisateurs locaux sauthentifient eux-mmes. Impossible dajouter un utilisateur avec un mot de passe vide dans OmniPass Si vous rencontrez des difficults pour ajouter un utilisateur avec un mot de passe vide dans OmniPass, vous devrez peut-tre modifier vos paramtres de scurit locale. Essayez dabord la procdure explique dans la section Impossible dajouter un utilisateur Windows dans OmniPass. Si le problme persiste, essayez la procdure suivante. Cliquez sur lcran Dmarrage moderne->[Windows]+[X], Panneau de configuration, Outils dadministration et Paramtres de scurit locale. Ouvrez Stratgies locales et Options de scurit, puis double-cliquez sur Comptes:
restreindre lutilisation de mots de passe vierges par le compte local louverture de session console. Ce paramtre doit tre configur sur Dsactiv. Durant la procdure douverture dune session Windows, une bote de dialogue saffiche aprs lauthentification OmniPass Aprs avoir install OmniPass sur votre systme, vous pouvez choisir de vous connecter Windows laide dOmniPass. Vous vous authentifiez avec OmniPass ( laide du mot de passe principal ou dun priphrique de scurit enregistr) et OmniPass vous connecte Windows. Au cours du processus dauthentification, il se peut que la bote de dialogue Erreur de connexion saffiche. 124 - Prsentation du capteur dempreintes digitales Cette bote de dialogue apparat si OmniPass na pas russi vous connecter Windows laide des informations didentification fournies (nom dutilisateur et mot de passe). Ceci peut arriver dans les circonstances suivantes :
Votre mot de passe Windows a chang. Votre compte Windows a t dsactiv. Si vous rencontrez des difficults cause de la premire raison, vous devrez mettre jour OmniPass avec votre mot de passe de compte Windows modifi. Cliquez sur Mettre jour le mot de passe et une bote de dialogue vous invitera reconfirmer votre mot de passe. Entrez le nouveau mot de passe Windows et cliquez sur OK. Si lerreur persiste, il est peu probable que le problme soit d la modification de votre mot de passe Windows. 125 - Prsentation du capteur dempreintes digitales Index A propos de ce guide 11 Adaptateur Adaptateur auto/avion 37, 38 adaptateurs secteur 37 Alimentation de fiches 82 adaptateur auto/avion 37 adaptateur secteur 37 allumer 39 dfectuosit 60 teindre 47 gestion 44 problmes 62 sources 37 Amorage du systme 42 Auto-diagnostic de mise sous tension 40, 65 B Batterie 48 augmentation de la longvit 83 batterie au lithium-polymre 48 conservation de l'nergie 44 court-circuite 50 dfectueuse 61 entretien 82 puise 61 faible 50 mode veille 50 problmes 61, 62 remplacement 50 remplacement hors tension 51 remplacement sous tension 52 Batterie amovible 18 Batterie au lithium-polymre 18 BIOS Bluetooth guide 41 utilitaire de configuration 41 informations supplmentaires 105 bouton de rotation 36 boutons dapplications C Cble de sortie c.c. 37 Camra Web arrire 18 Camra Web avant 15, 20 Camras 15, 18, 20 Capteur d'empreintes digitales barre doutils dauthentification OmniPass 114 connexion un site mmoris 116 dsinstallation dOmniPass 110 enregistrement dune empreinte digitale 112 enregistrement des utilisateurs 111 mmorisation dun mot de passe 115 premire mise en marche 108 remplacement du mot de passe 114 utilisation dOmniPass 114 126 Capteur dempreintes digitales 107 Carte rseau ans fil connexion au rseau 101 Carte rseau sans fil avant d'utiliser la carte rseau sans fil 96 configuration 96 dpannage 101 dsactivation/dconnexion 99 modes 97 spcifications 104 Carte SD installation 53 retrait 54 Carte Secure Digital 53 retrait 54 Cliquer 26 Commutateur d'alimentation/veille/reprise 44 Connecteur entre c. c. 19 Conventions utilises dans ce guide 11 Coordonnes 12 Coordonnes pour contacter Fujitsu 12 D Dpannage 55 alimentation 60 batterie 61 disque dur 58 cran 63 problmes audio 58 souris 58 USB 59 Disque dur problmes 58 127 E couteurs 19 cran 24 cran tactile problmes 63, 64 cliquer 27 talonner 29 glisser 28 cran tactile capacitif 30 Enregistrement 43 F Fonction de veille prolonge 45 G Garantie 13 Gestion de l'alimentation dans Windows 46 Gestion de lalimentation 44 H Haut-parleurs incorpors 58 I icne d'alimentation 23 L le stylet ne rpond pas 59 Lecteur multimdia entretien 84 Logiciels pr-installs 89 Logiciels prinstalls Adobe Reader 90 manuels 90 loquet de dgagement de la batterie 17, 18 M Messages d'erreurs 65 Microsoft Office Starter 2010 90 Mode sommeil (veille) 44 Mots de passe d'accs au disque dur 40 Mouvements 30 N Numriseur 26 P Point d'attache du cordon du stylet 17, 21 Port HDMI 19 Ports USB (Universal Serial Bus) 19, 20 Prise d'alimentation c.c. 37 Procdure d'amorage 40 R Recharge des batteries 49 Redmarrage 46 Renseignements sur la rglementation 91 Restaurer vos logiciels pr-installs 66 S Souris problmes 58 Spcifications 85 alimentation 88 audio 86 clavier 87 dimensions et poids 88 environnement requis 88 mmoire 85 microprocesseur 85 numriseur 86 options de mmoire de masse 86 puce 85 vido 86 Stylet entretien du stylet 32 installation du cordon 34 modification des paramtres du stylet 32 remplacement de l'embout du stylet 33 remplacement de la pile du stylet 33 Syst 90 U Utilisation de lcran tactile capacitif optionnel 30 V Veille prolonge activation/dsactivation 46 W Windows 11 Z zone d'tat 22 zone dtat icne d'alimentation, tats du systme indiqus par 23 128
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-05-30 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2016-05-06 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | |
3 | 2015-10-19 | 5745 ~ 5825 | DTS - Digital Transmission System | |
4 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
6 | 2015-10-15 | 5745 ~ 5825 | DTS - Digital Transmission System | |
7 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
8 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
9 | 2014-10-20 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
10 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
11 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
12 | 2013-10-31 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | |
13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
14 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
15 | 2013-07-11 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
16 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
17 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
various | Effective |
2016-05-30
|
||||
various |
2016-05-06
|
|||||
various |
2015-10-19
|
|||||
various |
2015-10-15
|
|||||
various |
2014-10-20
|
|||||
various |
2013-10-31
|
|||||
various |
2013-07-11
|
|||||
various | Applicant's complete, legal business name |
Mitsumi Electric Co Ltd
|
||||
various | FCC Registration Number (FRN) |
0006990816
|
||||
various | Physical Address |
2-11-2,Tsurumaki,Tama-shi
|
||||
various |
Tokyo,206-8567, N/A
|
|||||
various |
Japan
|
|||||
app s | TCB Information | |||||
various | TCB Application Email Address |
c******@telefication.com
|
||||
various |
T******@TIMCOENGR.COM
|
|||||
various |
L******@ul.com
|
|||||
various | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
various | Grantee Code |
EW4
|
||||
various | Equipment Product Code |
DWMW095A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
various | Name |
M******** T********
|
||||
various | Telephone Number |
81-42********
|
||||
various | Fax Number |
81-42********
|
||||
various |
t******@mitsumi.co.jp
|
|||||
app s | Technical Contact | |||||
various | Firm Name |
SGS Taiwan Ltd.
|
||||
various |
134, Wu Kung Rd.,
|
|||||
various | Name |
W******** C******
|
||||
various | Physical Address |
No.134, Wu Kung Road, New Taipei
|
||||
various |
134, Wu Kung Rd., Wuku Industrial Zone
|
|||||
various |
134, Wu Kung Rd.
|
|||||
various |
Taiwan
|
|||||
various | Telephone Number |
88622******** Extension:
|
||||
various |
88622********
|
|||||
various | Fax Number |
88622********
|
||||
various |
w******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
various | Firm Name |
Mitsumi Electric Co Ltd
|
||||
various |
SGS Taiwan Ltd.
|
|||||
various |
134, Wu Kung Rd.,
|
|||||
various | Name |
M******** T******
|
||||
various |
W**** C********
|
|||||
various | Physical Address |
2-11-2, Tsurumaki, Tama-shi
|
||||
various |
134, Wu Kung Rd., Wuku Industrial Zone
|
|||||
various |
134, Wu Kung Rd.
|
|||||
various |
Japan
|
|||||
various |
Taiwan
|
|||||
various | Telephone Number |
042-3********
|
||||
various |
88622******** Extension:
|
|||||
various |
88622********
|
|||||
various | Fax Number |
81-42********
|
||||
various |
88622********
|
|||||
various |
t******@mitsumi.co.jp
|
|||||
various |
w******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
various | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
various | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
various | Yes | |||||
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/31/2015 | ||||
various | 03/29/2016 | |||||
various | 04/18/2015 | |||||
various | 04/28/2014 | |||||
various | 01/07/2014 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
various | Is this application for software defined/cognitive radio authorization? | No | ||||
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
various | DTS - Digital Transmission System | |||||
various | DSS - Part 15 Spread Spectrum Transmitter | |||||
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11abgn 2X2 MIMO + BT/BLE RADIO MODULE | ||||
various | P263 | |||||
various | P265 | |||||
various | 802.11 11abgn 2x2 MIMO+BT/BLE RADIO MODULE | |||||
various | 802.11 11abgn 2X2 MIMO + BT/BLE RADIO MODULE | |||||
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
various | Yes | |||||
various | Modular Equipment Type | Single Modular Approval | ||||
various | Does not apply | |||||
various | Limited Single Modular Approval | |||||
various | Purpose / Application is for | Class II Permissive Change | ||||
various | Original Equipment | |||||
various | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
various | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
various | Grant Comments | Class II Permissive Change : Applying for approval under 15.407(b)(ii) for devices with antenna gains less than 10 dBi. Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
various | Class II Permissive Change : This change is to accommodate with the new U-NII rules. Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC: Integration in a host with FCC ID: XHM-P263L31 with adding 4 new antennas. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.425 W/kg and 0.825 W/kg, respectively. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.455 W/kg and 0.674 W/kg, respectively. C2PC: Integration in a host with FCC ID: XHM-P263L31 with adding 4 new antennas. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC: Integration in a host with FCC ID: XHM-P263L31 with adding 4 new antennas. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 07/11/2013) Class II Permissive Change: This Class II Permissive Change is to and 2 antennas and install this module into the platform, host owner: FLYTECH TECHNOLOGY CO., LTD. Model: P265(D31L), platform: P265. The highest reported SAR values for body and simultaneous transmission use conditions are 0.369 W/kg, and 0.581 W/kg, respectively. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive Change is to and 2 antennas and install this module into the platform, host owner: FLYTECH TECHNOLOGY CO., LTD. Model: P265(D31L), platform: P265. Power Output is conducted. The highest reported SAR value for simultaneous transmission use condition is 0.422 W/kg. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. Operations in 5.15-5.25 GHz band are for indoor use only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 07/11/2013) Class II Permissive Change: This Class II Permissive Change is to and 2 antennas and install this module into the platform, host owner: FLYTECH TECHNOLOGY CO., LTD. Model: P265(D31L), platform: P265. The highest reported SAR values for body and simultaneous transmission use conditions are 0.343 W/kg, and 0.466 W/kg, respectively. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 07/11/2013) Class II Permissive Change: This Class II Permissive Change is to install this module into host Tablet PC, Trade Name: Fujitsu, Model Q555. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. Operations in 5.15-5.25 GHz band are for indoor use only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 07/11/2013) Class II Permissive Change: This Class II Permissive Change is to install this module into host Tablet PC, Trade Name: Fujitsu, Model Q555. The highest reported SAR value is 1.25W/kg. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 07/11/2013) Class II Permissive Change: This Class II Permissive Change is to install this module into host Tablet PC, Trade Name: Fujitsu, Model Q555. The highest reported SAR value is 1.52W/kg. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. Operations in 5.15-5.25 GHz band are for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 7/11/2013) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to install this module into host Tablet PC, Trade Name: FUJITSU, Model: Q584. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.76 W/kg and 0.76 W/kg, respectively. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to install this module into host Tablet PC, Trade Name: FUJITSU, Model: Q584. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Date of Grant: 7/11/2013) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to install this module into host Tablet PC, Trade Name: FUJITSU, Model: Q584. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.97 W/kg and 1.47 W/kg, respectively. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Output power is conducted. Device is 2x2 802.11abgn with Bluetooth and BLE combo card module. Approval is limited to OEM installation only in mobile RF exposure configurations. Operations in 5.15-5.25 GHz band are for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Is there an equipment authorization waiver associated with this application? | No | ||||
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
various | Firm Name |
SGS Taiwan Ltd. Electronics & Communication Lab
|
||||
various |
SGS Taiwan Ltd.
|
|||||
various |
EMC Technologies Pty. Ltd.
|
|||||
various |
Sporton International Inc.
|
|||||
various |
Compliance Certification Services
|
|||||
various | Name |
R****** W******
|
||||
various |
R****** W****
|
|||||
various |
J**** L********
|
|||||
various |
C**** Z********
|
|||||
various |
A**** C********
|
|||||
various |
T******** C********
|
|||||
various | Telephone Number |
+886-******** Extension:
|
||||
various |
+886-******** Extension:
|
|||||
various |
886-2******** Extension:
|
|||||
various |
61-3-********
|
|||||
various |
886-3******** Extension:
|
|||||
various |
510-7********
|
|||||
various | Fax Number |
+886-********
|
||||
various |
+886-********
|
|||||
various |
886 2********
|
|||||
various |
61-3-********
|
|||||
various |
886-3********
|
|||||
various |
510-6********
|
|||||
various |
r******@sgs.com
|
|||||
various |
R******@sgs.com
|
|||||
various |
j******@sgs.com
|
|||||
various |
c******@emctech.com.au
|
|||||
various |
a******@sporton.com.tw
|
|||||
various |
t******@ccsemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 38 CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 38 49 CC MO | 5745 | 5825 | 0.283 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC MO | 5745 | 5825 | 0.036 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.0089 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC MO | 2412 | 2462 | 0.459 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15C | CC MO | 5745 | 5825 | 0.283 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0130000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402 | 2480 | 0.0089 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15C | CC MO | 2412 | 2462 | 0.459 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15C | CC MO | 5745 | 5825 | 0.283 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0130000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15E | CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15E | CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0130000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15E | CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15C | CC | 2402 | 2480 | 0.0089 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15C | CC MO | 2412 | 2462 | 0.459 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15C | CC MO | 5745 | 5825 | 0.283 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15E | CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0130000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15C | CC | 2402 | 2480 | 0.0089 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15C | CC MO | 2412 | 2462 | 0.459 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15C | CC MO | 5745 | 5825 | 0.283 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0130000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO | 5180 | 5240 | 0.04 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.049 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15E | CC MO ND | 5500 | 5700 | 0.04 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15C | CC | 2402 | 2480 | 0.0089 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15C | CC MO | 2412 | 2462 | 0.459 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15C | CC MO | 5745 | 5825 | 0.283 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC