all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
manual Part I | Users Manual | 1.95 MiB | ||||
1 2 |
|
manual Part II | Users Manual | 3.26 MiB | ||||
1 2 |
|
manual Part III | Users Manual | 2.45 MiB | ||||
1 2 |
|
manual Part IV | Users Manual | 1.65 MiB | ||||
1 2 |
|
users manual part I | Users Manual | 1.95 MiB | ||||
1 2 |
|
users manual part II | Users Manual | 3.26 MiB | ||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Operational Description | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) |
1 2 | manual Part I | Users Manual | 1.95 MiB |
Mitsumi Electric Co., Ltd. Wavit11 User's Manual Wavit11 Users Manual Revision 1.01 1/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual Revision History December 6, 2001 Revision 1.0 Translated from Japanese edition (Rev. 1.0) January 19, 2002 Revision 1.01 Regulatory Compliance Notice changed 2/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual Contents Revision History............................................................................................2 About This Guide..........................................................................................5 Regulatory Compliance Notices ................................................................6 1. Preface....................................................................................................8 1. Preface....................................................................................................8 2. Accompanied Accessories........................................................................8 3. Features ..................................................................................................8 4. How to use Wavit11.................................................................................9 5. About Wireless LAN Network ...............................................................10 5.1. Ad-Hoc LAN .................................................................................. 11 5.2. IBSS LAN......................................................................................12 5.3. Infrastructure LAN..........................................................................13 5.4. Wireless Bridge...............................................................................14 6. Installation method of Wavit11 Configuration Utility ..............................15 6.1. Microsoft Windows Version ............................................................16 6.2. Confirm an Ethernet port.................................................................17 6.3. Confirm the TCP/IP protocol...........................................................19 6.4. Confirm an IP Address....................................................................25 6.5. Installation of the Wavit11Configuration Utility ...............................28 7. Wavit11 Set Up .....................................................................................33 7.1. How to Start the Wavit11Configuration Utility .................................34 7.2. How to setup the Ad-Hoc mode.......................................................38 7.3. How to Setup the 802.11 Ad-Hoc mode...........................................41 7.4. How to Setup the Infrastructure mode..............................................44 7.5. How to Setup the Both mode...........................................................47 7.6. How to Setup the AP mode..............................................................51 7.7. How to Setup the Wireless Bridge Mode..........................................55 7.8. How to Change the Wavit11 IP address............................................59 7.9. How to Change the Control Password ..............................................61 7.10. Wavit11 Initialization ....................................................................63 8. Encryption Setting.................................................................................65 8.1. Encryption setting ...........................................................................65 8.2. Original Encryption ........................................................................68 8.2. 40bit WEP Encryption.....................................................................71 8.3. 128bit WEP Encryption...................................................................74 8.4. Encryption Disable..........................................................................77 3/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 9. Wavit11Setting up .................................................................................79 9.1. Connection to personal computer.....................................................80 9.2. Connection to Printer ......................................................................81 9.3. Connection to Network Equipment..................................................82 10. Items that can be set with Configuration Utility ....................................83 10.1. Operational Mode .........................................................................84 10.2. SS ID............................................................................................85 10.3. Channel........................................................................................86 10.4. Data Rate......................................................................................87 10.5. Roaming.......................................................................................88 10.6. Hidden Node Compensation..........................................................89 10.7. Details ..........................................................................................90 10.8. RTS Threshold ..............................................................................91 10.9. Fragmentation Threshold ...............................................................92 10.10. Short Retry Limit ........................................................................93 10.11. Long Retry Limit.........................................................................94 10.12. Beacon Interval...........................................................................95 10.13. SSID transmission.......................................................................96 10.14. Authentication Algorithm ............................................................97 10.15. Basic Rate Set.............................................................................98 10.16. Encryption mode.........................................................................99 10.17. Encryption Key ......................................................................... 100 10.18. Default Key .............................................................................. 101 10.19. Destination Address................................................................... 102 11. Interoperability with third vendor wireless LAN ................................. 103 11.1. Confirmed wireless LAN card ..................................................... 103 11.2. Confirmed Access Point .............................................................. 104 11.3. Setting ........................................................................................ 105 12. Troubleshooting................................................................................. 106 13. Specifications.................................................................................... 108 4/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual About This Guide Absolutely do not do the operation when the instruction is given with this mark. Please pay attention in the case you do the operation indicated with this mark. The relevant usage is explained. Please refer, as occasion demands. This is for an explanation such as terminology. 5/108 CONFIDENTIAL which the receiver is connected. Class B Equipment This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:
l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit deferent from that to Mitsumi Electric Co., Ltd. Wavit11 User's Manual Regulatory Compliance Notices CAUTION (United States only) FCC Radio-Frequency Exposure Statement This equipment generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, this equipment has to be installed and operated while maintaining a minimum body to antenna distance of 20 cm. Canadian Notice Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Modifications Change or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. l Consult the dealer or an experienced radio/TV technician for help. 6/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual If this product is used near the television set or radio receiver, the TV display may be sometimes disturbed or the noise may be heard in audio output. In such a situation, it will be necessary to install this product far from TV and radio set. This product may affect the medical apparatus, so you cannot install this product inside a hospital. install If you this product near the microwave oven, communication performances may degrade due to the radio wave emitted from microwave oven. Install this product far from microwave oven or prevent from the simultaneous usage. Accompanied AC adapter is designed for 117volts AC use only. The use of AC other than 117volts is dangerous and not permitted. The use of other AC adapters is prohibited. If other AC adapters were used, the product would heat or it may lead to a fire. Wavit is a registered trademark of Mitsumi Electric Co., Ltd. Wi-FiTM is a registered trademark of Wireless Ethernet Compatibility Alliance. RC4 is a registered trademark of RSA Security Inc. in United State and other country. Microsoft, Windows, and Windows NT are Corporation. All company names and product names are trademark of their respective companies. Mitsumi are not responsible for any damage or loss caused by the Wavit11 Wireless LAN. Mitsumi hold the copyright on this Users Manual. Anyone cannot copy or reproduce this Users manual unless Mitsumi grant agreement in writing form. trademarks of Microsoft 7/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 1. Preface Thank you for purchasing the Wavit11. This users manual includes various notices to allow you to use the Wavit11 safely and properly. Keep this anytime and read carefully. In this way, you can always refer to this. 2. Accompanied Accessories The following accessories are accompanied to Wavit11. If you could not check all accessories, contact with the distributor. Item Wavit11 Wireless LAN AC Adapter Ethernet Cable Wall Mount Attachment Users Manual Wavit11 Configuration Utility Accessories Quantity 1 1 1 1 1 1 Note Straight Cable (1m) This document 3.5 inch Floppy disk Wavit11 Wireless LAN 3. Features AC Adapter Wall Mount Wavit11 Users Attachment Manual Configuration Ethernet Cable Utility The Wavit11 is standalone wireless LAN with 10BASE-T interface. When using Wavit11, you can install wireless network not only to personal computers but also to printer and other network equipment that have 10BASE-T ports. The Wavit11 is connected to network devices with 10BASE-T cable, so you do not need to install device drivers to set up Wavit11. The Wavit11 operates as Access Point that supports up to 16 Wavit11. Also, it operates as Wireless Bridge. Wireless Bridge connects two networks that are physically separated by two Wavit11s. Access Point If you install the combination network of wired LAN and wireless LAN, you will need intermediary device in order to connect the wired and wireless networks. Such equipment is called Access Point. 8/108 CONFIDENTIAL of Wavit11. 1. Select a kind of wireless LAN network according to the omtended use Mitsumi Electric Co., Ltd. Wavit11 User's Manual 4. How to use Wavit11 2. Install Wavit11 Configuration Utility to the personal computer. 3. Set up the Wavit11 by using Wavit11 Configuration Utility. 4. In the case that an encryption is used, set up the encryption mode. 5. Set up Wavit11. About Wireless LAN Network page10 Installation method of Wavit11 Configuration Utility page15 Wavit11 Set Up Encryption Setting Wavit11Setting up page33 page65 page79 9/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5. About Wireless LAN Network There are 4 types of wireless LAN network that using Wavit11. Make a selection according to the usage of the wireless LAN network. Wireless LAN Type Ad-Hoc LAN IBSS LAN Infrastructure LAN The network combined both wired and wireless clients. Wireless Bridge The network consists of only wireless clients. The network consists of only wireless clients. The network connects two networks wirelessly. Function Ad-Hoc LAN IBSS LAN Infrastructure LAN Wireless Bridge page11 page12 page13 page14 10/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.1. Ad-Hoc LAN The Ad-Hoc LAN is a network consisting of only wireless LAN. It is the network that does not connect to the Ethernet backbone and external network such as Internet. There is not a restriction on the number of wireless LAN units in the Ad-Hoc LAN. Set the communication mode of Wavit11 to Ad-Hoc mode. Ad-Hoc LAN Ad-Hoc Mode Ad-Hoc Mode Ad-Hoc Mode The communication between all Wavit11 will be possible if the channel and encryption setting agree in the Ad-Hoc LAN. Paying attention on the security is necessary for the setting up. How to setup the Ad-Hoc mode Page38 11/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.2. IBSS LAN The IBSS LAN is a network of only wireless LAN. It is the network that does not communicate to the Ethernet backbone and external network such as Internet. There is not a restriction on the number of wireless LAN units in the IBSS LAN. Set the communication mode of Wavit11 to 802.11 Ad-Hoc mode. IBSS LAN IBSS Mode IBSS Mode IBSS Mode Communication between Wavit11 is possible as long as their SS ID agree in contrast to Ad-Hoc LAN, although intended use of IBSS LAN is similar to that of Ad-Hoc LAN. How to Setup the 802.11 Ad-Hoc mode page41 12/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.3. Infrastructure LAN Communication is established via an Access Point in the infrastructure LAN, therefore direct communication with other Wavit11s is not possible. This is the network that is used in such an occasion where Ethernet is being connected to Access Point and Internet access is carried out through Ethernet. Set the communication mode of one Wavit11 to AP mode and set the other Wavit11 communication mode to Infrastructure mode. Hub Hub Router Internet AP Mode Infrastructure LAN Infrastructure Mode Infrastructure Mode One Wavit11 can support up to 16 units of Wavit11 in AP mode. How to Setup the Infrastructure mode How to Setup the AP mode page44 page51 13/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.4. Wireless Bridge The Wireless Bridge connects two wired network using two Wavit11. The maximum number of network equipment that can be connected to wired LAN is 16. Set the communication mode of Wavit11 to Wireless Bridge mode. Wireless Bridge Internet Router Hub Hub Wireless Bridge Mode Wireless Bridge Mode If more than 16 network equipment are connected, there will be cases where some network equipment cannot access to the other side network equipment. How to Setup the Wireless Bridge Mode page55 14/108 CONFIDENTIAL 1. Confirm the operating system of personal computer and its version. 2. Confirm the existence of Ethernet port in your personal computer. 3. Confirm if the TCP/IP protocol is installed and set up appropriately in Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6. Installation method of Wavit11 Configuration Utility 4. In the case "Obtain an IP address automatically is set in a TCP/IP of 5. Install Wavit11 Configuration Utility to your personal computer. your personal computer IP address will be confirmed. your personal computer. Microsoft Windows Version Confirm an Ethernet port Confirm the TCP/IP protocol Confirm an IP Address page16 page17 page19 page25 Installation of the Wavit11Configuration Utility page28 Wavit11 Configuration Utility does not operate on the operating system other than Microsoft Windows, such as MAC operating system and Lynux. At least one personal computer in which Microsoft Windows operating system runs is necessary to set up Wavit11 using Wavit11 Configuration Utility. 15/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.1. Microsoft Windows Version Wavit11 Configuration Utility runs on Microsoft Windows of the following version. OS Windows95 Windows95 OSR2 Windows95 OSR2.5 Windows98 Windows98 SE Windows Me Windows NT 4.0 WorkStation Windows 2000 Windows XP Status Notes Install 4.01 or above Internet Explorer Install 4.01 or above Internet Explorer Install 4.01 or above Internet Explorer OK OK OK OK OK Install 4.01 or above Internet Explorer Windows NT SP3 is required to install Internet Explorer 4.01. 16/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.2. Confirm an Ethernet port Wavit11 Configuration Utility should be installed to the personal computer with Ethernet port. Also, the device driver needs to be set up appropriately. Confirm in accordance with the following procedure.
[STEP1] Select Start->Setting->Control Panel.
[STEP2] Click Network icon in the control panel. 17/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Check to see that an Ethernet adapter is installed in Configuration page. If there is no Ethernet adapter in the Configuration page, install Ethernet adapter according to the users manual of your personal computer or the users manual of Ethernet adapter you use.
[STEP4] Click the Cancel button. 18/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.3. Confirm the TCP/IP protocol The TCP/IP protocol should be installed to the personal computer with Wavit11 Configuration Utility. It is necessary that Wavit11 Configuration Utility is set up appropriately. Confirm the TCP/IP protocol in accordance with the following procedure.
[STEP1] Select Start->Setting->Control Panel
[STEP2] Click Network icon in the Control Panel. 19/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Check to see that the relevant TCP/IP protocol is installed that corresponds to the Ethernet adapter used in the Configuration page. Select TCP/IP protocol corresponding the Properties button. the Ethernet adapter and click to 20/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Confirm your selection in the IP address page. Which one is selected, either Obtain an IP address automatically or Specify an IP address?
In the case that "Specify an IP address is selected proceed to
"STEP10". Consult your network administrator, in the case that you do not know whether you should select Obtain an IP address automatically or Specify an IP address. 21/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] Click Cancel button.
[STEP6] Click Cancel button. Proceed to Confirm an IP Address page25 22/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP10] In the case that Specify an IP address is selected in the IP Address page, check that the IP Address and Subnet Mask are set. Take notes of the "IP Address" and "Subnet Mask" that are confirmed here. Return to STEP5 in the case that Obtain an IP address automatically is selected. Consult your network administrator, in the case that an "IP Address" and "Subnet Mask" are not set. 23/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP11] Click the Cancel button.
[STEP12] Click the Cancel button. 24/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.4. Confirm an IP Address
[STEP1] Click Start->Run
[STEP2] Input winipcfg to Open and click OK button. 25/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Select Ethernet adapter at Adapter Address in IP Configuration window. Install an Ethernet adapter, in accordance to the users manual of the personal computer and Ethernet adapter you use, in the case that no "Ethernet adapter" is discovered.
[STEP4] Confirm the IP Address and Subnet Mask. Take notes of the IP Address and Subnet Mask you confirmed here. 26/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual In IP Address and Subnet Mask are both 0.0.0.0, it will mean that the IP address acquisition is not accomplished successfully. Click Renew All button to obtain an IP Address.
[STEP5] Click OK button. 27/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.5. Installation of the Wavit11Configuration Utility
[STEP1] Insert Wavit11Configuration Utility disk to drive A.
[STEP2] Click My Computer icon.
[STEP3] Click 3.5 floppy (A:) icon. 28/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Click Setup icon. The Install Shield Wizard window appears. 29/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] Click the Next> button in Install Shield Wizard window.
[STEP6] Select Destination Folder. Click Next> button to install the Configuration Utility to the default folder. Click the Browse button in the case that you want to install to a different folder. 30/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP7] Select Program Folder. Click Next> button if you agree the default folder. If you prefer to install it to another folder, select from the Existing Folders and click Next button. The Setup Status appears. 31/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP8] Install Shield Wizard Complete appears. Click the Finish button. 32/108 CONFIDENTIAL
1 2 | manual Part II | Users Manual | 3.26 MiB |
Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7. Wavit11 Set Up 1. Start Wavit11 Configuration Utility. 2. Set the Wavit11 in accordance with a communication mode. How to Start the Wavit11Configuration Utility page34 How to setup the Ad-Hoc mode How to Setup the 802.11 Ad-Hoc mode How to Setup the Infrastructure mode How to Setup the AP mode How to Setup the Wireless Bridge Mode page38 page41 page44 page51 page57 33/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.1. How to Start the Wavit11Configuration Utility
[STEP1] Connect Wavit11 and personal computer using the straight cable.
[STEP2] Connect DC plug of AC adapter to Wavit11 DC IN jack.
[STEP3] Connect AC adapter to AC outlet.
[STEP4] Click the Wavit11 Configuration Utility icon.
[STEP5] Wavit11 Wireless LAN window appears. The information of Wavit11 that is connected to this personal computer is displayed in the station list in the Wavit11 Wireless LAN window. 34/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual In the case that only "MAC Address" and "IP Address" are displayed in the station list in the "Wavit11 Wireless LAN"
window, you cannot set up the Wavit11. Modify the IP address of Wavit11. How to Change the Wavit11 IP address page59 35/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual In the case that nothing is displayed to the station list of the Wavit11 Wireless LAN window, you cannot set up the Wavit11. Confirm the following. 1. Connection between the Wavit11 and your personal computer 2. Connection between the Wavit11 and the AC adapter 3. Connection between the AC adapter and the AC outlet 4. TCP/IP setting of your personal computer 36/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP6] Click Setup in the Wavit11 Wireless LAN window. If the operational mode is AP or Wireless Bridge:
The Log in window will appear after clicking the Setup button. Input control password. The default control password is password. Initialize Wavit11 when you have forgotten password. Wavit11 Initialization page63 the control 37/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.2. How to setup the Ad-Hoc mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 38/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to Ad-Hoc, select the Channel and then click the Apply button. The Channel should be same on all Wavit11 in Ad-Hoc mode. The Wavit11 that has different Channel cannot communicate each other.
[STEP4] Click the OK button. 39/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to Ad-Hoc and the Channel is set correctly as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility. When your selection is not reflected, click the "Search. 40/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.3. How to Setup the 802.11 Ad-Hoc mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 41/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to 802.11 Ad-Hoc and set the SSID, and then click the Apply button. Set the SSID in 802.11 Ad-Hoc mode. Wavit11 with different SSID cannot communicate each other.
[STEP4] Click the OK button. 42/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to 802.11 Ad-Hoc and the Channel is set correctly as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly and then end the Wavit11 Configuration Utility 43/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.4. How to Setup the Infrastructure mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 44/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At to Infrastructure mode and set the SSID, then click the Apply button. the Property page, change the Operational Mode Set the SSID in Infrastructure mode. This SSID must be same with that of Access Point.
[STEP4] Click the OK button. 45/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to Infrastructure, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly and then end the Wavit11 Configuration Utility. 46/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.5. How to Setup the Both mode If there is an Access Point, Wavit11 in Both mode is will operate as Wavit11 in Infrastructure mode. If there is no Access Point, Wavit11 in Both mode will operate as Wavit11 in Ad-Hoc mode. Hub Hub Router Internet AP Mode Infrastructure Mode Both mode Both Mode Ad-Hoc LAN Ad-Hoc Mode Ad-Hoc Mode The Wavit11 in Both mode cannot operate both Infrastructure LAN and Ad-Hoc LAN simultaneity. The Wavit11 in Both mode decides whether there is an Access Point or not at the time of boot and then it decides whether it should connect to Access Point or join to Ad-Hoc LAN. To connect to Access Point after joining to Ad-Hoc LAN, it is necessary to reboot Wavit11. 47/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 48/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational mode to Both, set the SSID and select the Channel, and then click the Apply button. Set the SSID and select the Channel in Both mode. This SSID must be the same as that of Access Point.
[STEP4] Click the OK button. 49/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Channel is set as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility. In the Both mode, there are cases where Ad-Hoc or Infrastructure is shown under Mode or Operational Mode. 50/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.6. How to Setup the AP mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 51/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to AP mode and set the SSID and select the Channel, and then click the Apply button. Set the SSID and select the Channel in AP mode. This SSID must be the same as that of Wavit11 in Infrastructure mode.
[STEP4] Click the OK button. 52/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to AP and Channel is set correctly as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility. 53/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP7] Change the control password. Many unidentified person can access the Wavit11 in AP mode. When the setting of Wavit11 has been modified, Access Point cannot make the proper operation. Modify the control password so as to provide protection against the settings being changed. Take notes for the new control password after its modification. How to Change the Control Password page61 54/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.7. How to Setup the Wireless Bridge Mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property. 55/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to Wireless Bridge and select the Channel, and then open the Wireless Bridge page.
[STEP4] Last 6 digit of MAC address that is indicated at the label put on the other end of Wavit11 should be inserted to MAC address to communicate with, at the Wireless Bridge page, and then click the Apply button. 56/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] Click the OK button.
[STEP6] After checking that the Operational Mode is set to Wireless Bridge and the Channel is set correctly as you selected, and then click the OK button. 57/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP7] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility.
[STEP8] Change the Control password. Many unidentified person can access the Wavit11 in Wireless Bridge mode. When the setting of Wavit11 has been modified, the Wireless Bridge cannot make a proper operation. Modify the control password so as to provide the protection against the settings being changed. Take notes for the new control password after its modification. How to Change the Control Password page61 58/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.8. How to Change the Wavit11 IP address
[STEP1] Click the IP address in the Wavit11 Wireless LAN window.
[STEP2] At the IP address configuration window, set the IP Address and the Subnet Mask, and then click the OK button. A host address different from that of personal computer should be set to the host address area. Setting will not be practicable if every bit comprising the host address is 1 and host address is 0. 59/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual When the wrong subnet mask is input by mistake, Wavit11 cannot sometimes communicate with personal computer. Thus there are possibilities that the setting of Wavit11 cannot be accomplished and the mistaken setting cannot be reverted afterwards. Initialize the Wavit11, if this kind of mistake takes place. Wavit11 Initialization page63
[STEP3] Click the OK button.
[STEP4] After the Wavit11 Wireless LAN window appears, Wavit11 information is shown in the station list. 60/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.9. How to Change the Control Password
[STEP1] Click the Password in the Wavit11 Wireless LAN window.
[STEP2] Input current control password, and click the OK button.
[STEP3] Input new passwords twice, and click the OK button. 61/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Click the OK button. The password can be modified only when the operational mode is AP or Wireless Bridge.
[STEP5] The Wavit11 Wireless LAN window appears. 62/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.10. Wavit11 Initialization
[STEP1] Click File (F)->Initialize (R) in the Wavit11 Wireless LAN window.
[STEP2] The window opens to confirm your intention of carrying out the initialization. Click the OK button.
[STEP3] At the Initialization window, input 6 digits of the MAC address that is indicated at the label put on the bottom part of Wavit11 undertaking the initialization, then click the OK button. 63/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Click the OK button.
[STEP5] The Wavit11 Wireless LAN window is displayed. It is necessary to make a setting again, because the setting of Wavit11 has returned to the original setting at the time of the factory shipment. 64/108 CONFIDENTIAL
1 2 | manual Part III | Users Manual | 2.45 MiB |
Mitsumi Electric Co., Ltd. Wavit11 User's Manual 8. Encryption Setting 8.1. Encryption setting
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Encryption mode page. 65/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] The encryption mode page opens. Select an encryption mode; the encryption mode at the time of factory shipment is Disable. 66/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual There are 3 type of encryption mode. 1. Mitsumi proprietary Original Encryption. 2. 40bit WEP Encryption. 3. 128bit WEP Encryption. Original Encryption 40bit WEP Encryption 128bit WEP Encryption Encryption Disable page68 page71 page74 page77 67/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 8.2. Original Encryption
[STEP1] At the Encryption mode page, select the Original as an Encryption mode, input a Generation string that generates encryption keys, and then click the Generate button.
[STEP2] Select the Default Key. 68/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Click the Write button.
[STEP4] Click the OK button. 69/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] The Encryption mode and the Encryption keys are written. Click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, end the Wavit11 Configuration Utility. 70/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 8.2. 40bit WEP Encryption
[STEP1] At the Encryption mode page, select the 40bit WEP as an Encryption mode, input a Generation string that generates encryption keys, and then click the Generate button.
[STEP2] Select the Default Key. 71/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Click the Write button.
[STEP4] Click the OK button. 72/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] The Encryption mode and the Encryption keys are written. Click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, end the Wavit11 Configuration Utility. 73/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 8.3. 128bit WEP Encryption
[STEP1] At the Encryption mode page, select the 128bit WEP as an Encryption mode, input a Generation string that generates encryption key, and then click the Generate button.
[STEP2] Click the Write button. 74/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Click the OK button.
[STEP4] The Encryption mode and the Encryption key are written. Click the OK button. 75/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP6] After returning to the Wavit11 Wireless LAN window, end the Wavit11 Configuration Utility. 76/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 8.4. Encryption Disable
[STEP1] Select the Disable as an Encryption mode, and then click the Write button.
[STEP2] Click the OK button. 77/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] The Encryption mode is written. Click the OK button.
[STEP4] After returning to the Wavit11 Wireless LAN window, end the Wavit11 Configuration Utility. 78/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 9. Wavit11Setting up Connection to personal computer Connection to Printer Connection to Network Equipment page80 page81 page82 79/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 9.1. Connection to personal computer
[STEP1] Connect Wavit11 and the personal computer with a straight cable.
[STEP2] Connect the DC plug of the AC adapter to the Wavit11 DC jack.
[STEP3] Connect the AC adapter to the AC outlet. The setup of Wavit11 must be completed in advance, or the setup can be done after [STEP3]. To connect to a personal computer, the following modes are recommended. Ad-Hoc mode 802.11Ad-Hoc mode Infrastructure mode Wavit11 Set Up page33 80/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 9.2. Connection to Printer
[STEP1] Set the Wavit11 appropriately.
[STEP2] Connect Wavit11 and printer with a straight cable.
[STEP3] Connect the DC plug of the AC adapter to the Wavit11 DC jack.
[STEP4] Connect the AC adapter to the AC outlet. The printer to connect to Wavit11 needs the Ethernet port. The setup of Wavit11 must be completed in advance. To connect to the printer, the following operational mode are recommended. Ad-Hoc mode 802.11Ad-Hoc mode Infrastructure mode Wavit11 Set Up page33 81/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 9.3. Connection to Network Equipment HUB Cable Modem ADSL Modem Router Example of the Network equipment is as follows.
[STEP1] Set the Wavit11 appropriately.
[STEP2] Connect Wavit11 and personal computer with a straight cable.
[STEP3] Connect the DC plug of the AC adapter to the Wavit11 DC jack.
[STEP4] Connect the AC adapter to the AC outlet. The setup of Wavit11 must be completed in advance. To connect recommended. to network equipment, the AP mode is Wavit11 Set Up page33 82/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10. Items that can be set with Configuration Utility You can set the following items with the Wavit11 Configuration Utility. Items Operational Mode SS ID Channel Data Rate Roaming Hidden Node Compensation RTS Threshold Fragmentation Threshold Short Retry Limit Long Retry Limit Beacon Interval SSID Transmission Authentication Algorithm Basic Rate Set Encryption Mode Encryption Key Default Key Destination MAC Address Choice Infrastructure, Both, AP, Wireless Ad-Hoc, Bridge, 802.11Ad-Hoc Within 32 letters (ASCII code: 0x20 - 0x7e) 1-11 1M, 2M, 5.5M, 11M, Auto Enable/Disable Enable/Disable 0-2347, Default 2347 256 2346, Default 2346 1-255, Default 7 1-255, Default 4 20-1000 ms, Default 100 Enable/Disable Open system/Shared Key 1,2Mbps/1,2,5.5,11Mbps Disable/Original/40bit WEP/128bit WEP 5byte x 4, Default key 1-4 00-a0-96-xx-xx-xx Normally, it is not necessary to change the following item setting. Check each item in this manual when modifying the setting. RTS Threshold Fragmentation Threshold Short Retry Limit Long Retry Limit Beacon Interval SSID Transmission Authentication Algorithm Basic Rate Set 83/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.1. Operational Mode Select the operational mode for the Wavit11. About Wireless LAN Network page10 84/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.2. SS ID It is a Network ID that indicates whole wireless LAN network. Set any ASCII string: 32 characters max. It will be necessary to set the same SSID to all Wavi11 in case of Infrastructure LAN. It will be necessary to set the same SSID to all Wavit11 in case of IBSS LAN. 85/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.3. Channel Set a channel Wavit11 uses. Channel setting will be required in case of the following operational mode. Ad-Hoc mode Both mode AP mode Wireless Bridge mode To configure several wireless LAN groups within a same area, a unique channel should be set per each group, and it is necessary to set each channel at the place 5 channels apart in order to avoid the interference between the wireless LANs. In the case 3 groups of the wireless LAN are configured in the close area, it will be necessary to make the setting at 1CH, 6CH and 11CH to the respective group. 86/108 CONFIDENTIAL
1 2 | manual Part IV | Users Manual | 1.65 MiB |
Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.4. Data Rate There are 5 choices: 1Mbps, 2Mbps, 5.5Mbps, 11Mbps and the automatic setting. When the automatic setting is selected, Wavit11 makes communication in the fastest possible rate, and this depends on the equipment at the other end. If the communication environment is degraded and making communication in the present data rate becomes impractical, the data rate will be lowered and the wireless LAN communication will continue. 87/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.5. Roaming This is a way to set whether the Wavit11does a roaming or not. What is Roaming?
This function can be activated in an environment where multiple Access Points exist. If the wireless LAN under communication with a certain Access Point moves and fails in receiving the radio wave, the roaming function will enable Wavit11 to change the destination to the other nearby Access Point. If Wavit11 switches the Access Point successfully, it can send and receive the wireless LAN data without interruption, and that it can access the network without any interruption. Setting up of Roaming function will be possible only if the operational mode is as follows:
Infrastructure mode AP mode 88/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.6. Hidden Node Compensation Depended on the placement of multiple wireless LANs, there is a case that the wireless LAN communication disturbance caused by other wireless LANs takes place and the data rate may be fallen off. If the Hidden Node Compensation is set to Enable, the Wavit11 seizes the wireless LAN communication line prior to the actual data transmission, so it can mitigate the mutual disturbance of wireless LAN communication and the degradation of data rate. What is Hidden Node?
In the wireless LAN system, many wireless LANs communicate each other on the same frequency. Normally every wireless LAN senses whether or not another wireless LAN has already started the wireless LAN communication so as not to disturb the already started wireless LAN communication. However, some wireless LANs disturb the already started wireless LAN communication transmitting the data without sensing the existence of another wireless LAN communication. Such a kind of wireless LAN that may disturb the other wireless LAN communication is called Hidden Node. 89/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.7. Details Click the Details button to enable the Wavit11 detailed setting. Normally you do not need to change these items. Check each item of this manual, when the setting should be modified. 90/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.8. RTS Threshold In the case that the Hidden node compensation is set to Enable, setup of RTS threshold will be possible. The Wavit11 seizes the wireless LAN communication line prior to actual data transmission if the data length is greater than RTS Threshold. When the Hidden node compensation is set to Enable, the initial value is 0, therefore, the Wavit11 seizes the wireless LAN communication line prior to every length of actual data transmission. The wireless LAN performance will improve when this RTS Threshold is enlarged, in the case that Hidden node disturbance is not so violent. Check the performance by modifying the RTS threshold, when you modify the value from the initial value, because the optimal RTS threshold depends on the placement and application of wireless LAN. 91/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.9. Fragmentation Threshold In the case that the transmitted data do not correctly reach the wireless LAN on the partner side, the Wavit11 will retransmit the data predefined times. This retransmission occurs frequently by a communication error under poor communication condition and the performance of the wireless LAN network sometimes deteriorates. There is a way to mitigate the performance deterioration, that is the retransmission of divided frame. Thus, the wireless LAN frame should be divided into small pieces, and here is a way to set the size of divided frame. All frames are sent without any data frame division in default setting. 92/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.10. Short Retry Limit In the case that the transmitted data do not correctly reach the wireless LAN on the partner side, the Wavit11 will retransmit the data predefined times and the number of retransmission times is set here. In Short Retry Limit, the number of retransmission is set, for the data frame whose length is below RTS threshold. If a big value is set needlessly, the Wavit11 may try to retransmit data many times to the wireless LAN at which the radio wave cannot get, so the performance of the whole wireless LAN can be deteriorated. Closely examine the degree of performance required by the application, if you modify the setting. 93/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.11. Long Retry Limit In the case that the transmitted data do not correctly reach the wireless LAN on the partner side, the Wavit11 will retransmit the data predefined times and the number of retransmission times is set here. In Long Retry Limit, the number of retransmission is set, for the data frame whose length is above RTS threshold. If a big value is set needlessly, the Wavit11 may try to retransmit data many times to the wireless LAN at which the radio wave cannot get, so the performance of the whole wireless LAN can be deteriorated. Closely examine the degree of performance required by the application, if you modify the setting. 94/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.12. Beacon Interval The Wavit11 in AP mode periodically transmits special frame called Beacon to information about current setting to another Wavit11 that tries to join the wireless LAN network. Here, is a way to set the Beacon interval. This item can be set only if the operational mode is AP mode. 95/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.13. SSID transmission This is a description to set SSID transmission. It is possible to select whether SS ID should be included in Beacon frame transmitted by Wavit11 in AP mode. This item can be set only if the operational mode is AP mode. 96/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.14. Authentication Algorithm The algorithm that is used for the Authentication between Wavit11 is selected. There are 2 kinds of Authentication Algorithm, Open System and Shared Key, and the checking of the encryption key is carried out mutually in Shared Key. You can set this item in the following operational mode. Infrastructure mode AP mode Both mode 802.11 Ad-Hoc mode You cannot set this item if the encryption mode is set to Disable. 97/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.15. Basic Rate Set The sending speed of broadcast and multicast frame can be set. 98/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.16. Encryption mode The Encryption mode used for the wireless LAN communication between Wavit11 is selected. It is not possible to make communication between Wavit11 with different encryption mode. 99/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.17. Encryption Key It is the Encryption key for the encryption of data transmission. Set the same encryption key to each Wavit11. There are two ways to set encryption key:
You set some string and encryption key from string. You set the encryption key directly.
the Wavit11 automatically generate 100/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.18. Default Key This is one of the encryption keys Wavit11 use for data transmission. You can set this item if the Encryption Mode is either Original or 40bit WEP. When the different Default Key is set to each Wavit11, the security against the illegal wiretapping is strengthened. 101/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 10.19. Destination Address Set the MAC address of the Wavit11 on the other side for Wireless Bridge operation. The MAC address is indicated at the label put at the back of the Wavit11. Make sure to satisfy the following condition to set the MAC address correctly for the successful Wireless Bridge operation:
- Wavit11 should be in Wireless Bridge mode
- Channel should be the same 102/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 11. Interoperability with third vendor wireless LAN Wavit11 has interoperability with third vendor wireless LAN under certain conditions. If you install intermixed wireless network of third vendor Wireless LAN and Wavit11, refer to Users Manual enclosed in the package of third vendor wireless LAN. However, Mitsumi does not guarantee that Wavit11 can communicate with non-Wavit11 wireless LAN. 11.1. Confirmed wireless LAN card Table 1.1 Wireless LAN Card information Vendor Product 3ComAirConnect Wireless LAN PC Card AirMac Card Cisco Aironet 340 Series Wireless PC Card 3Com Apple Cisco COMPAQ WL-100 Wireless LAN PC Card Corega Corega Elecom Linksys Lucent Melco Melco Melco NEC NTT-M E Samsung Symbol corega Wireless LAN PCC11 corega Wireless LAN PCCA11 Laneed Wireless PC Card Instant Wireless Network PC Card ORINOCO PC Card Gold AirStation Wireless LAN Card AirStation Wireless LAN Card AirStation Wireless LAN Card WarpStar Aterm WL11C MN128 SS-LAN CARD11 SWL-2000N 11Mbps Wireless LAN PC Card Spectrum24 PC Card 11Mbps Table 1.2 Test results Vendor Model #
WL-100 3CRWE737A AIR-PCM -342 CG-WLPCC11 CG-WLPCCA11 LD-W11/PCC 3Com Apple Cisco COMPA Q Corega Corega Elecom Linksys WPC11 Lucent Melco Melco Melco NEC NTT-M E WLC010-D53 PC24E-H-FC WLI-PCM-L11 WLI-PCM-L11G WLI-PCM-S11 PC-WL/11C AdHoc WEP 40bit OK
OK OK OK OK OK
WEP Disable OK
OK OK OK OK OK
OK(1) OK(1) OK OK OK OK NG NG OK OK Model#
3CRWE737A M7600J/B AIR-PCM -342 WL-100 CG-WLPCC11 CG-WLPCCA11 LD-W11/PCC WPC11 PC24E-H-FC WLI-PCM-L11 WLI-PCM-L11G WLI-PCM-S11 PC-WL/11C WLC010-D53 SWL-2000N LA4121-1020 Firmware Version V2.20-01 1.3.1 4.23 00.08.00.00 0.7.5 00.08.00.00 4.04/6.16 00.07.05.00 0.75 V2.20.01 Driver Version 2.2.5.10 6.64 0.29.4 0.29.4 0.29.4 1.0.4 0.29.10a 6.28 1.21 1.21 1.01.00.0 1.0.0.0 0.29.4 3.65 2.2.5.10 Results 802.11AdHoc(IBSS) Infrastructure WEP 128bit OK
WEP Disable OK OK OK OK OK WEP 40bit OK
OK OK WEP 128bit OK
OK WEP Disable OK OK OK OK OK WEP 40bit OK
OK OK
OK OK NG(2) NG(2)
OK
OK OK OK OK OK OK OK OK OK OK OK OK(1) OK(1) OK OK OK OK OK OK OK OK
OK OK OK
OK
OK OK 103/108 CONFIDENTIAL WEP 128bit OK
OK OK
OK OK
OK
OK SWL-2000N LA4121-1020 Mitsumi Electric Co., Ltd. Wavit11 User's Manual OK(1) OK Samsung Symbol OK OK
(1) This product does not receive fragmented frame.
(2) This product does not support hexagonal encryption key setting. OK(1) OK OK OK
OK
OK
OK OK OK OK OK 11.2. Confirmed Access Point Table 2.1 Wireless LAN Access Point Information Vendor 3Com Apple Cisco COMPAQ Product Model #
3ComAirConnect Wireless LAN Access Point 3CRWE747A AirMac Base Station Cisco Aironet 340 Series Access Point WL-400 Wireless LAN Hardware Access Point corega Wireless LAN AP-11 Laneed Airhawk M7601J/B AIR-AP342E2C WL-400 corega Elecom IO-DATA Wireless LAN Access Point Lucent Melco Melco Melco NEC NTT-M E Symbol YAMAHA Net Volante RT60w ORINOCO WavePOINT2 Access Point AirStation Access Point WLA-T1-L11 AirStation Access Point WLA-L11 AirStation Access Point WLA-L11G WarpStar Aterm WL50T MN128 SOHO SLOT IN AirPack11 Spectrum24 Access Point 11Mbps CG-WLAP11 LD-W11/AP WN-B11/AXP WavePOINT2 WLA-T1-L11 WLA-L11 WLA-L11G PC-WL50T1 AP4121-1050 RT60w Firmware Version 01.50.10 4.25.08 2.5.3 4.5.5G 2.0.0 3.0.39 3.71 v100 6.08 6.08 1.70 02.20.04 5.0010 Table 2.2 Test Results Vendor Modem #
3CRWE747A AIR-AP342E2C CG-WLAP11 LD-W11/AP 3Com Apple Cisco COMPAQ WL-400 corega Elecom IO-DATA WN-B11/AXP Lucent Melco Melco Melco NEC NTT-M E AirPack11 Symbol YAMAHA RT60w WLA-T1-L11 WLA-L11 WLA-L11G PC-WL50T1 AP4121-1050 WEP Disable OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK Results WEP 40bit OK
OK OK OK OK OK OK
OK OK OK OK(1) OK OK WEP 128bit
OK OK OK
OK
OK(1)
104/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 11.3. Setting The general setup method to connect with third vendor wireless LAN is as follows, for each communication mode.
(Ad-Hoc mode) In Ad-Hoc mode, set same channel to both Wavitr11 and third vendor Wireless LAN.
(802.11 Ad-Hoc mode) In 802.11 Ad-Hoc mode, set same SSID to both Wavit11 and third vendor wireless LAN.
(Infrastructure mode) In Infrastructure mode, set same SSID to both Wavit11 and third vendor Access Point.
(AP mode) In AP mode, set same SSID to Wavit11 and third vendor Wireless LAN.
(Wireless Bridge mode) In Wireless Bridge mode connection to the third vendor wireless LAN is not possible. You need to use two Wavit11s when you set up a wireless bridge. Wavit11 mode Wavit11 setting Ad-Hoc 802.11Ad-Hoc Infrastructure Both AP Wireless Bridge Channel SS ID SS ID SS ID Channel SS ID Wireless LAN setting Channel SS ID SSID Channel SS ID (ESS ID) Access Point setting SS ID (ESS ID) SS ID (ESS ID) Channel 105/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 12. Troubleshooting Situations It does not work Verifying Does Power LED light up?
Does LINK LED light up?
Does TX/RX LED light up?
to meet Are the configuration settings appropriate the condition of the target Wavit11?
Is settings appropriately?
channel the It does not communicate in Ad-Hoc mode. the Are appropriately set?
encryption keys It does not communicate in 802.11 Ad-Hoc mode. Is the appropriate SSID set?
the Are appropriately set?
encryption keys It does not communicate in Infrastructure mode. Is the appropriate SSID set?
the Are appropriately set?
encryption keys Measures to Connect AC Adapter Wavit11. Connect AC Adapter to the outlet. Connect 10BASE-T cable properly. Check 10BASE-T cable polarity. Install Wavit11 near the target Wireless LAN, and confirm the communication. By using configuration tool, check configuration. of tool, In Ad-Hoc mode, the same the should be set. Open configuration and confirm channel settings. You need to set the same encryption keys. Open the configuration tool, and write in encryption keys again. You need to set the same SSID other with that the Wavit11.Open configuration and confirm the SSID. You need to set the same encryption keys. Open the configuration tool, and write in encryption keys again You need to set the same SSID with that of Access Point. Open the configuration tool, and confirm the SSID. You need to set the same encryption keys. Open the configuration tool, and write in encryption keys again tool, It does not communicate in Both mode. It does not communicate in Access Point mode. the encryption Are appropriately set?
Is the channel set appropriately? You need to set the same channel in Both mode. Open the configuration tool, and confirm channel settings. You need to set the same encryption keys. Open the configuration tool, and write in encryption keys again. You need to set the same SSID with that of the client. Open the configuration tool, and confirm the SSID. Does the SSID fit to the client SSID?
keys 106/108 CONFIDENTIAL to set the keys encryption Is the channel set appropriately?
Are appropriately set?
It does not communicate in Wireless Bridge mode. Mitsumi Electric Co., Ltd. Wavit11 User's Manual same You need encryption keys. Open the configuration tool, and write in encryption keys again. In Wireless Bridge mode, you need to set the same channel. Open the configuration tool, and confirm the channel. You need to set the target MAC address correctly. Open the configuration tool, and confirm the MAC address. You need to set the same encryption keys. Open the configuration tool, and write in encryption keys again. Refer to Operating System Users Manual. Was the MAC address properly set?
Are appropriately set?
encryption computer keys the It does not communicate in all modes. Wavit11s The distance is too far. Change the Wavit11 position to enable the communication. Refer to the Operating System Users manual and configure the networks. Can you find Wavit11s on the screen in the top window of configuration tool?
Is the TCP/IP protocol installed to your personal computer?
Was the network configuration of Personal set properly?
Does it communicate properly when personal computers are connected to each other with 10BASE-T cross cable?
Can make communication when they are installed in the neighborhood?
What is your operating system? For configuration tool, you need Windows95+IE4.01 or above. Connect personal computer and Wavit11 using 10BASE-T straight cable. Refer to Users manual of the personal computer to install the TCP/IP protocol to your personal computer. Open the configuration tool, and change the IP address so as the network address. Open the configuration tool and perform initialization. After initialization, you need to set up all configurations again. Open the configuration tool and perform the initialization. After initialization, you need to set up all configurations again. Is the network address of Wavit11 IP address the same with the personal computer?
to match that of 107/108 CONFIDENTIAL The configuration tool does not start. Setting is not feasible with the configuration tool. Was the unusable IP address set?
I have forgotten the password. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 13. Specifications Item Frequency Channel Modulation Interface Data Rate Receive Sensitivity Output Power Temperature Range Standards Supply Voltage Consumption Current Size Weight Range Data Rate 11Mbps 5.5Mbps 2Mbps 1Mbps Specification 2,400 -2,483.5MHz 11 CCK (Complementary Code Keying) 10BASE-T 11Mbps/5.5Mbps/2Mbps/1Mbps
-83dBm(11Mbps, FER=8x10-2) 15dBm 0-40 Celsius ARIB STD-T66 IEEE 802.11b 5.0V TX: 600mA RX: 330mA 65(W) x88(D) x 29.9(H) mm, Antenna is excluded 110g Indoor 30m 40m 50m 60m Outdoor 60m 80m 100m 120m These ranges are estimated from the general environment. For Wavit11 installation, refer to the above and confirm the communication. Performance The performance is measured on the application. The performance varies according to PC power, network interface card power, installation environment, wireless network traffic and external noise. On condition that setting is made in the following environment: Ad-Hoc, Windows SE and TCP/IP protocol, the highest performance of the Wavit11 will be given at around 5Mbps. 108/108 CONFIDENTIAL
1 2 | users manual part I | Users Manual | 1.95 MiB |
Mitsumi Electric Co., Ltd. Wavit11 User's Manual Wavit11 Users Manual Revision 1.01 1/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual Revision History December 6, 2001 Revision 1.0 Translated from Japanese edition (Rev. 1.0) January 19, 2002 Revision 1.01 Regulatory Compliance Notice changed 2/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual Contents Revision History............................................................................................2 About This Guide..........................................................................................5 Regulatory Compliance Notices ................................................................6 1. Preface....................................................................................................8 1. Preface....................................................................................................8 2. Accompanied Accessories........................................................................8 3. Features ..................................................................................................8 4. How to use Wavit11.................................................................................9 5. About Wireless LAN Network ...............................................................10 5.1. Ad-Hoc LAN .................................................................................. 11 5.2. IBSS LAN......................................................................................12 5.3. Infrastructure LAN..........................................................................13 5.4. Wireless Bridge...............................................................................14 6. Installation method of Wavit11 Configuration Utility ..............................15 6.1. Microsoft Windows Version ............................................................16 6.2. Confirm an Ethernet port.................................................................17 6.3. Confirm the TCP/IP protocol...........................................................19 6.4. Confirm an IP Address....................................................................25 6.5. Installation of the Wavit11Configuration Utility ...............................28 7. Wavit11 Set Up .....................................................................................33 7.1. How to Start the Wavit11Configuration Utility .................................34 7.2. How to setup the Ad-Hoc mode.......................................................38 7.3. How to Setup the 802.11 Ad-Hoc mode...........................................41 7.4. How to Setup the Infrastructure mode..............................................44 7.5. How to Setup the Both mode...........................................................47 7.6. How to Setup the AP mode..............................................................51 7.7. How to Setup the Wireless Bridge Mode..........................................55 7.8. How to Change the Wavit11 IP address............................................59 7.9. How to Change the Control Password ..............................................61 7.10. Wavit11 Initialization ....................................................................63 8. Encryption Setting.................................................................................65 8.1. Encryption setting ...........................................................................65 8.2. Original Encryption ........................................................................68 8.2. 40bit WEP Encryption.....................................................................71 8.3. 128bit WEP Encryption...................................................................74 8.4. Encryption Disable..........................................................................77 3/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 9. Wavit11Setting up .................................................................................79 9.1. Connection to personal computer.....................................................80 9.2. Connection to Printer ......................................................................81 9.3. Connection to Network Equipment..................................................82 10. Items that can be set with Configuration Utility ....................................83 10.1. Operational Mode .........................................................................84 10.2. SS ID............................................................................................85 10.3. Channel........................................................................................86 10.4. Data Rate......................................................................................87 10.5. Roaming.......................................................................................88 10.6. Hidden Node Compensation..........................................................89 10.7. Details ..........................................................................................90 10.8. RTS Threshold ..............................................................................91 10.9. Fragmentation Threshold ...............................................................92 10.10. Short Retry Limit ........................................................................93 10.11. Long Retry Limit.........................................................................94 10.12. Beacon Interval...........................................................................95 10.13. SSID transmission.......................................................................96 10.14. Authentication Algorithm ............................................................97 10.15. Basic Rate Set.............................................................................98 10.16. Encryption mode.........................................................................99 10.17. Encryption Key ......................................................................... 100 10.18. Default Key .............................................................................. 101 10.19. Destination Address................................................................... 102 11. Interoperability with third vendor wireless LAN ................................. 103 11.1. Confirmed wireless LAN card ..................................................... 103 11.2. Confirmed Access Point .............................................................. 104 11.3. Setting ........................................................................................ 105 12. Troubleshooting................................................................................. 106 13. Specifications.................................................................................... 108 4/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual About This Guide Absolutely do not do the operation when the instruction is given with this mark. Please pay attention in the case you do the operation indicated with this mark. The relevant usage is explained. Please refer, as occasion demands. This is for an explanation such as terminology. 5/108 CONFIDENTIAL which the receiver is connected. Class B Equipment This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:
l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit deferent from that to Mitsumi Electric Co., Ltd. Wavit11 User's Manual Regulatory Compliance Notices CAUTION (United States only) FCC Radio-Frequency Exposure Statement This equipment generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, this equipment has to be installed and operated while maintaining a minimum body to antenna distance of 20 cm. Canadian Notice Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Modifications Change or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. l Consult the dealer or an experienced radio/TV technician for help. 6/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual If this product is used near the television set or radio receiver, the TV display may be sometimes disturbed or the noise may be heard in audio output. In such a situation, it will be necessary to install this product far from TV and radio set. This product may affect the medical apparatus, so you cannot install this product inside a hospital. install If you this product near the microwave oven, communication performances may degrade due to the radio wave emitted from microwave oven. Install this product far from microwave oven or prevent from the simultaneous usage. Accompanied AC adapter is designed for 117volts AC use only. The use of AC other than 117volts is dangerous and not permitted. The use of other AC adapters is prohibited. If other AC adapters were used, the product would heat or it may lead to a fire. Wavit is a registered trademark of Mitsumi Electric Co., Ltd. Wi-FiTM is a registered trademark of Wireless Ethernet Compatibility Alliance. RC4 is a registered trademark of RSA Security Inc. in United State and other country. Microsoft, Windows, and Windows NT are Corporation. All company names and product names are trademark of their respective companies. Mitsumi are not responsible for any damage or loss caused by the Wavit11 Wireless LAN. Mitsumi hold the copyright on this Users Manual. Anyone cannot copy or reproduce this Users manual unless Mitsumi grant agreement in writing form. trademarks of Microsoft 7/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 1. Preface Thank you for purchasing the Wavit11. This users manual includes various notices to allow you to use the Wavit11 safely and properly. Keep this anytime and read carefully. In this way, you can always refer to this. 2. Accompanied Accessories The following accessories are accompanied to Wavit11. If you could not check all accessories, contact with the distributor. Item Wavit11 Wireless LAN AC Adapter Ethernet Cable Wall Mount Attachment Users Manual Wavit11 Configuration Utility Accessories Quantity 1 1 1 1 1 1 Note Straight Cable (1m) This document 3.5 inch Floppy disk Wavit11 Wireless LAN 3. Features AC Adapter Wall Mount Wavit11 Users Attachment Manual Configuration Ethernet Cable Utility The Wavit11 is standalone wireless LAN with 10BASE-T interface. When using Wavit11, you can install wireless network not only to personal computers but also to printer and other network equipment that have 10BASE-T ports. The Wavit11 is connected to network devices with 10BASE-T cable, so you do not need to install device drivers to set up Wavit11. The Wavit11 operates as Access Point that supports up to 16 Wavit11. Also, it operates as Wireless Bridge. Wireless Bridge connects two networks that are physically separated by two Wavit11s. Access Point If you install the combination network of wired LAN and wireless LAN, you will need intermediary device in order to connect the wired and wireless networks. Such equipment is called Access Point. 8/108 CONFIDENTIAL of Wavit11. 1. Select a kind of wireless LAN network according to the omtended use Mitsumi Electric Co., Ltd. Wavit11 User's Manual 4. How to use Wavit11 2. Install Wavit11 Configuration Utility to the personal computer. 3. Set up the Wavit11 by using Wavit11 Configuration Utility. 4. In the case that an encryption is used, set up the encryption mode. 5. Set up Wavit11. About Wireless LAN Network page10 Installation method of Wavit11 Configuration Utility page15 Wavit11 Set Up Encryption Setting Wavit11Setting up page33 page65 page79 9/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5. About Wireless LAN Network There are 4 types of wireless LAN network that using Wavit11. Make a selection according to the usage of the wireless LAN network. Wireless LAN Type Ad-Hoc LAN IBSS LAN Infrastructure LAN The network combined both wired and wireless clients. Wireless Bridge The network consists of only wireless clients. The network consists of only wireless clients. The network connects two networks wirelessly. Function Ad-Hoc LAN IBSS LAN Infrastructure LAN Wireless Bridge page11 page12 page13 page14 10/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.1. Ad-Hoc LAN The Ad-Hoc LAN is a network consisting of only wireless LAN. It is the network that does not connect to the Ethernet backbone and external network such as Internet. There is not a restriction on the number of wireless LAN units in the Ad-Hoc LAN. Set the communication mode of Wavit11 to Ad-Hoc mode. Ad-Hoc LAN Ad-Hoc Mode Ad-Hoc Mode Ad-Hoc Mode The communication between all Wavit11 will be possible if the channel and encryption setting agree in the Ad-Hoc LAN. Paying attention on the security is necessary for the setting up. How to setup the Ad-Hoc mode Page38 11/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.2. IBSS LAN The IBSS LAN is a network of only wireless LAN. It is the network that does not communicate to the Ethernet backbone and external network such as Internet. There is not a restriction on the number of wireless LAN units in the IBSS LAN. Set the communication mode of Wavit11 to 802.11 Ad-Hoc mode. IBSS LAN IBSS Mode IBSS Mode IBSS Mode Communication between Wavit11 is possible as long as their SS ID agree in contrast to Ad-Hoc LAN, although intended use of IBSS LAN is similar to that of Ad-Hoc LAN. How to Setup the 802.11 Ad-Hoc mode page41 12/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.3. Infrastructure LAN Communication is established via an Access Point in the infrastructure LAN, therefore direct communication with other Wavit11s is not possible. This is the network that is used in such an occasion where Ethernet is being connected to Access Point and Internet access is carried out through Ethernet. Set the communication mode of one Wavit11 to AP mode and set the other Wavit11 communication mode to Infrastructure mode. Hub Hub Router Internet AP Mode Infrastructure LAN Infrastructure Mode Infrastructure Mode One Wavit11 can support up to 16 units of Wavit11 in AP mode. How to Setup the Infrastructure mode How to Setup the AP mode page44 page51 13/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 5.4. Wireless Bridge The Wireless Bridge connects two wired network using two Wavit11. The maximum number of network equipment that can be connected to wired LAN is 16. Set the communication mode of Wavit11 to Wireless Bridge mode. Wireless Bridge Internet Router Hub Hub Wireless Bridge Mode Wireless Bridge Mode If more than 16 network equipment are connected, there will be cases where some network equipment cannot access to the other side network equipment. How to Setup the Wireless Bridge Mode page55 14/108 CONFIDENTIAL 1. Confirm the operating system of personal computer and its version. 2. Confirm the existence of Ethernet port in your personal computer. 3. Confirm if the TCP/IP protocol is installed and set up appropriately in Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6. Installation method of Wavit11 Configuration Utility 4. In the case "Obtain an IP address automatically is set in a TCP/IP of 5. Install Wavit11 Configuration Utility to your personal computer. your personal computer IP address will be confirmed. your personal computer. Microsoft Windows Version Confirm an Ethernet port Confirm the TCP/IP protocol Confirm an IP Address page16 page17 page19 page25 Installation of the Wavit11Configuration Utility page28 Wavit11 Configuration Utility does not operate on the operating system other than Microsoft Windows, such as MAC operating system and Lynux. At least one personal computer in which Microsoft Windows operating system runs is necessary to set up Wavit11 using Wavit11 Configuration Utility. 15/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.1. Microsoft Windows Version Wavit11 Configuration Utility runs on Microsoft Windows of the following version. OS Windows95 Windows95 OSR2 Windows95 OSR2.5 Windows98 Windows98 SE Windows Me Windows NT 4.0 WorkStation Windows 2000 Windows XP Status Notes Install 4.01 or above Internet Explorer Install 4.01 or above Internet Explorer Install 4.01 or above Internet Explorer OK OK OK OK OK Install 4.01 or above Internet Explorer Windows NT SP3 is required to install Internet Explorer 4.01. 16/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.2. Confirm an Ethernet port Wavit11 Configuration Utility should be installed to the personal computer with Ethernet port. Also, the device driver needs to be set up appropriately. Confirm in accordance with the following procedure.
[STEP1] Select Start->Setting->Control Panel.
[STEP2] Click Network icon in the control panel. 17/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Check to see that an Ethernet adapter is installed in Configuration page. If there is no Ethernet adapter in the Configuration page, install Ethernet adapter according to the users manual of your personal computer or the users manual of Ethernet adapter you use.
[STEP4] Click the Cancel button. 18/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.3. Confirm the TCP/IP protocol The TCP/IP protocol should be installed to the personal computer with Wavit11 Configuration Utility. It is necessary that Wavit11 Configuration Utility is set up appropriately. Confirm the TCP/IP protocol in accordance with the following procedure.
[STEP1] Select Start->Setting->Control Panel
[STEP2] Click Network icon in the Control Panel. 19/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Check to see that the relevant TCP/IP protocol is installed that corresponds to the Ethernet adapter used in the Configuration page. Select TCP/IP protocol corresponding the Properties button. the Ethernet adapter and click to 20/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Confirm your selection in the IP address page. Which one is selected, either Obtain an IP address automatically or Specify an IP address?
In the case that "Specify an IP address is selected proceed to
"STEP10". Consult your network administrator, in the case that you do not know whether you should select Obtain an IP address automatically or Specify an IP address. 21/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] Click Cancel button.
[STEP6] Click Cancel button. Proceed to Confirm an IP Address page25 22/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP10] In the case that Specify an IP address is selected in the IP Address page, check that the IP Address and Subnet Mask are set. Take notes of the "IP Address" and "Subnet Mask" that are confirmed here. Return to STEP5 in the case that Obtain an IP address automatically is selected. Consult your network administrator, in the case that an "IP Address" and "Subnet Mask" are not set. 23/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP11] Click the Cancel button.
[STEP12] Click the Cancel button. 24/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.4. Confirm an IP Address
[STEP1] Click Start->Run
[STEP2] Input winipcfg to Open and click OK button. 25/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] Select Ethernet adapter at Adapter Address in IP Configuration window. Install an Ethernet adapter, in accordance to the users manual of the personal computer and Ethernet adapter you use, in the case that no "Ethernet adapter" is discovered.
[STEP4] Confirm the IP Address and Subnet Mask. Take notes of the IP Address and Subnet Mask you confirmed here. 26/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual In IP Address and Subnet Mask are both 0.0.0.0, it will mean that the IP address acquisition is not accomplished successfully. Click Renew All button to obtain an IP Address.
[STEP5] Click OK button. 27/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 6.5. Installation of the Wavit11Configuration Utility
[STEP1] Insert Wavit11Configuration Utility disk to drive A.
[STEP2] Click My Computer icon.
[STEP3] Click 3.5 floppy (A:) icon. 28/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Click Setup icon. The Install Shield Wizard window appears. 29/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] Click the Next> button in Install Shield Wizard window.
[STEP6] Select Destination Folder. Click Next> button to install the Configuration Utility to the default folder. Click the Browse button in the case that you want to install to a different folder. 30/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP7] Select Program Folder. Click Next> button if you agree the default folder. If you prefer to install it to another folder, select from the Existing Folders and click Next button. The Setup Status appears. 31/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP8] Install Shield Wizard Complete appears. Click the Finish button. 32/108 CONFIDENTIAL
1 2 | users manual part II | Users Manual | 3.26 MiB |
Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7. Wavit11 Set Up 1. Start Wavit11 Configuration Utility. 2. Set the Wavit11 in accordance with a communication mode. How to Start the Wavit11Configuration Utility page34 How to setup the Ad-Hoc mode How to Setup the 802.11 Ad-Hoc mode How to Setup the Infrastructure mode How to Setup the AP mode How to Setup the Wireless Bridge Mode page38 page41 page44 page51 page57 33/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.1. How to Start the Wavit11Configuration Utility
[STEP1] Connect Wavit11 and personal computer using the straight cable.
[STEP2] Connect DC plug of AC adapter to Wavit11 DC IN jack.
[STEP3] Connect AC adapter to AC outlet.
[STEP4] Click the Wavit11 Configuration Utility icon.
[STEP5] Wavit11 Wireless LAN window appears. The information of Wavit11 that is connected to this personal computer is displayed in the station list in the Wavit11 Wireless LAN window. 34/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual In the case that only "MAC Address" and "IP Address" are displayed in the station list in the "Wavit11 Wireless LAN"
window, you cannot set up the Wavit11. Modify the IP address of Wavit11. How to Change the Wavit11 IP address page59 35/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual In the case that nothing is displayed to the station list of the Wavit11 Wireless LAN window, you cannot set up the Wavit11. Confirm the following. 1. Connection between the Wavit11 and your personal computer 2. Connection between the Wavit11 and the AC adapter 3. Connection between the AC adapter and the AC outlet 4. TCP/IP setting of your personal computer 36/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP6] Click Setup in the Wavit11 Wireless LAN window. If the operational mode is AP or Wireless Bridge:
The Log in window will appear after clicking the Setup button. Input control password. The default control password is password. Initialize Wavit11 when you have forgotten password. Wavit11 Initialization page63 the control 37/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.2. How to setup the Ad-Hoc mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 38/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to Ad-Hoc, select the Channel and then click the Apply button. The Channel should be same on all Wavit11 in Ad-Hoc mode. The Wavit11 that has different Channel cannot communicate each other.
[STEP4] Click the OK button. 39/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to Ad-Hoc and the Channel is set correctly as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility. When your selection is not reflected, click the "Search. 40/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.3. How to Setup the 802.11 Ad-Hoc mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 41/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to 802.11 Ad-Hoc and set the SSID, and then click the Apply button. Set the SSID in 802.11 Ad-Hoc mode. Wavit11 with different SSID cannot communicate each other.
[STEP4] Click the OK button. 42/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to 802.11 Ad-Hoc and the Channel is set correctly as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly and then end the Wavit11 Configuration Utility 43/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.4. How to Setup the Infrastructure mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 44/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At to Infrastructure mode and set the SSID, then click the Apply button. the Property page, change the Operational Mode Set the SSID in Infrastructure mode. This SSID must be same with that of Access Point.
[STEP4] Click the OK button. 45/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to Infrastructure, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly and then end the Wavit11 Configuration Utility. 46/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.5. How to Setup the Both mode If there is an Access Point, Wavit11 in Both mode is will operate as Wavit11 in Infrastructure mode. If there is no Access Point, Wavit11 in Both mode will operate as Wavit11 in Ad-Hoc mode. Hub Hub Router Internet AP Mode Infrastructure Mode Both mode Both Mode Ad-Hoc LAN Ad-Hoc Mode Ad-Hoc Mode The Wavit11 in Both mode cannot operate both Infrastructure LAN and Ad-Hoc LAN simultaneity. The Wavit11 in Both mode decides whether there is an Access Point or not at the time of boot and then it decides whether it should connect to Access Point or join to Ad-Hoc LAN. To connect to Access Point after joining to Ad-Hoc LAN, it is necessary to reboot Wavit11. 47/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 48/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational mode to Both, set the SSID and select the Channel, and then click the Apply button. Set the SSID and select the Channel in Both mode. This SSID must be the same as that of Access Point.
[STEP4] Click the OK button. 49/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Channel is set as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility. In the Both mode, there are cases where Ad-Hoc or Infrastructure is shown under Mode or Operational Mode. 50/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.6. How to Setup the AP mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property page. 51/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to AP mode and set the SSID and select the Channel, and then click the Apply button. Set the SSID and select the Channel in AP mode. This SSID must be the same as that of Wavit11 in Infrastructure mode.
[STEP4] Click the OK button. 52/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] In the Status page, check that the Operational Mode is set to AP and Channel is set correctly as you selected, and then click the OK button.
[STEP6] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility. 53/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP7] Change the control password. Many unidentified person can access the Wavit11 in AP mode. When the setting of Wavit11 has been modified, Access Point cannot make the proper operation. Modify the control password so as to provide protection against the settings being changed. Take notes for the new control password after its modification. How to Change the Control Password page61 54/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.7. How to Setup the Wireless Bridge Mode
[STEP1] Click the Setup in the Wavit11 Wireless LAN window.
[STEP2] Click the Property. 55/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP3] At the Property page, change the Operational Mode to Wireless Bridge and select the Channel, and then open the Wireless Bridge page.
[STEP4] Last 6 digit of MAC address that is indicated at the label put on the other end of Wavit11 should be inserted to MAC address to communicate with, at the Wireless Bridge page, and then click the Apply button. 56/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP5] Click the OK button.
[STEP6] After checking that the Operational Mode is set to Wireless Bridge and the Channel is set correctly as you selected, and then click the OK button. 57/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP7] After returning to the Wavit11 Wireless LAN window, check that all setups you selected are reflected correctly, and then end the Wavit11 Configuration Utility.
[STEP8] Change the Control password. Many unidentified person can access the Wavit11 in Wireless Bridge mode. When the setting of Wavit11 has been modified, the Wireless Bridge cannot make a proper operation. Modify the control password so as to provide the protection against the settings being changed. Take notes for the new control password after its modification. How to Change the Control Password page61 58/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.8. How to Change the Wavit11 IP address
[STEP1] Click the IP address in the Wavit11 Wireless LAN window.
[STEP2] At the IP address configuration window, set the IP Address and the Subnet Mask, and then click the OK button. A host address different from that of personal computer should be set to the host address area. Setting will not be practicable if every bit comprising the host address is 1 and host address is 0. 59/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual When the wrong subnet mask is input by mistake, Wavit11 cannot sometimes communicate with personal computer. Thus there are possibilities that the setting of Wavit11 cannot be accomplished and the mistaken setting cannot be reverted afterwards. Initialize the Wavit11, if this kind of mistake takes place. Wavit11 Initialization page63
[STEP3] Click the OK button.
[STEP4] After the Wavit11 Wireless LAN window appears, Wavit11 information is shown in the station list. 60/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.9. How to Change the Control Password
[STEP1] Click the Password in the Wavit11 Wireless LAN window.
[STEP2] Input current control password, and click the OK button.
[STEP3] Input new passwords twice, and click the OK button. 61/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Click the OK button. The password can be modified only when the operational mode is AP or Wireless Bridge.
[STEP5] The Wavit11 Wireless LAN window appears. 62/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual 7.10. Wavit11 Initialization
[STEP1] Click File (F)->Initialize (R) in the Wavit11 Wireless LAN window.
[STEP2] The window opens to confirm your intention of carrying out the initialization. Click the OK button.
[STEP3] At the Initialization window, input 6 digits of the MAC address that is indicated at the label put on the bottom part of Wavit11 undertaking the initialization, then click the OK button. 63/108 CONFIDENTIAL Mitsumi Electric Co., Ltd. Wavit11 User's Manual
[STEP4] Click the OK button.
[STEP5] The Wavit11 Wireless LAN window is displayed. It is necessary to make a setting again, because the setting of Wavit11 has returned to the original setting at the time of the factory shipment. 64/108 CONFIDENTIAL
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-06-13 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2002-06-13
|
||||
1 2 | Applicant's complete, legal business name |
Mitsumi Electric Co Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0006990816
|
||||
1 2 | Physical Address |
2-11-2,Tsurumaki,Tama-shi
|
||||
1 2 |
Tokyo,206-8567, N/A
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@metlabs.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
EW4
|
||||
1 2 | Equipment Product Code |
DWLA001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M**** T********
|
||||
1 2 | Telephone Number |
81-42********
|
||||
1 2 | Fax Number |
81-42********
|
||||
1 2 |
t******@mitsumi.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless LAN Desktop Unit | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output Power listed is Peak EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Akzo Nobel K.K.
|
||||
1 2 | Name |
S****** K****
|
||||
1 2 | Telephone Number |
+81 4********
|
||||
1 2 | Fax Number |
+81 4********
|
||||
1 2 |
k******@akzoemc.co.jp
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.0427000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC