Page 1 of 4 WML-C68_User_Manual 18. Jun. 2012 WML- C68 User Manual The purpose of this manual is to explain correct way how to integrate module WML-68 to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Content 1.General 2. European Community Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC 3. FCC Regulatory Information 4. Canada-Industry Canada (IC) 1. General This Bluetooth radio module has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer. This Bluetooth radio module is intended to be placed on the market in all States, where the Bluetooth technology and the used frequency band is released. For detail information concerning type approval of this module (e.g. where this module is already pre-approved) please contact the manufacturer. The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTDs prior agreement in writing. COMMERCIAL IN CONFIDENCE WML-C68 Page 2 o 8_User_Man 18. Jun. 20 of 4 nual 012 pean Com mmunity Declarat tion of Co onformity y with Re egard to t the R&TT TE ive 1999/
/5/EC TSUMI dec nts and othe clares that T r relevant pr The Mitsumi rovisions of D i module W Directive 19 WML-C68 is 999/5/EC. in complianc ce with the e essential ked with the ment is mark tes complian nce with the s:
pecifications symb R&TTE Dire bol and can ective 1999/
be used thro
/5/EC and m oughout the meets the rel European c levant parts community. of following 8, Electroma Data transmis
; Harmonize 9-17, Electro ity (EMC) sta HYPERLAN 1, Safety of Assessmen gnetic fields (
agnetic com ssion equipm ed EN cover omagnetic C andard for ra Equipment. Information nt of electron
(0 Hz-300 G Exposure e must not be Exposure ev to Radio F e co-located valuation. patibility and ment operati ring essentia Compatibility adio equipm d Radio spe ing in the 2,4 al requireme y and Radio ment and ser ctrum Matte 4 GHz ISM nts under ar spectrum M rvices; Part 1 ers (ERM); W band and us rticle 3.2 of t Matters (ERM 17: Specific Wideband tra sing wide ba the R&TTE D M); Electrom Conditions f ansmission and modulat Directive agnetic for Wideban nd tion Technology nic and elect GHz). t. y Equipment trical equipm ment related Frequency d or operatin n. y Radiation ng in conjunc ction with an to human ex xposure res strictions for ny other ante enna or trans smitter, with out cal documen ntation as re equired by th he Conformit ty Assessme ent procedu re is kept at the followin g O, 206-8567 JAPAN. TSURUMA MI ELECTR NEERING DE ODULE BUS 81-42-310-56 81-42-310-5 AKI, TAMA-S SHI, TOKYO D. RIC CO.,LTD EPTMENT SINESS DIVI 691 582 ISION his material ma ay not in who w without MITS COMME le or part be c SUMI ELECT ERCIAL IN CO copied, stored TRIC CO., LT E ONFIDENCE electronically y or communic eement in wri TDs prior agre icated to third iting. parties 3. FCC Regulatory Information Page 3 of 4 WML-C68_User_Manual 18. Jun. 2012 Caution:
Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help
Labelling MITSUMI Bluetooth module WML-C68 is labeled as below. FCC ID: POOWML-C68 If FCC ID is not visible when the module is installed into the system, Contains FCC ID:
POOWML-C68 shall be placed on the outside of final host system. This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTDs prior agreement in writing. COMMERCIAL IN CONFIDENCE Page 4 of 4 WML-C68_User_Manual 18. Jun. 2012 4. Canada-Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of this device. L utilization de ce dispositif est autorise seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Labelling MITSUMI Bluetooth module WML-C68 is labeled as below. IC ID: 4250A-WMLC68 If IC ID is not visible when the module is installed into the system, Contains IC ID:
4250A-WMLC68 shall be placed on the outside of final host system. This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTDs prior agreement in writing. COMMERCIAL IN CONFIDENCE