ALV3 Card Encoder without Print Function User Manual User Manual Product name ALV3 Card Encoder without Model DWHL-V3UA01 Print Function Ver.1.00 07.21.21 Miwa Lock Co., Ltd. 1 / 9 ALV3 Card Encoder without Print Function User Manual
< Revision History >
Ver. Date Application 1.0 08/06/2021 Create a new entry Prepared by Approved by Reviewed by Nakamura Ninomiya Matsunaga Miwa Lock Co., Ltd. 2 / 9 ALV3 Card Encoder without Print Function User Manual
<< Contents >>
1. Introduction ............................................................................................................................................. 4 2. Precautions on use ............................................................................................................................... 5 3. Product Specifications .......................................................................................................................... 8 Appendix 1. Outside view of DWHL-V3UA01 main unit....................................................................... 9 Miwa Lock Co., Ltd. 3 / 9 ALV3 Card Encoder without Print Function User Manual This document describes the specifications for the ALV3 Card Encoder without Print Function (here under refer by DWHL-V3UA01). DWHL-V3UA01 is a MIFARE/MIFARE Plus card reader/writer that connects to the PC 1. Introduction server via USB. USB MIFARE card DWHL-V3UA01 PC Server Fig 1-1 Host connection Miwa Lock Co., Ltd. 4 / 9 ALV3 Card Encoder without Print Function User Manual 2. Precautions on use
(1) Be careful not to generate static electricity when touching this device.
(2) Do not place objects that generate electromagnetic waves around this device. Otherwise it may cause malfunction or failure.
(3) Do not wipe with benzene, thinner, alcohol, etc. Otherwise it may cause discoloration or distortion. When wiping dirt, wipe it off with a soft cloth.
(4) Do not install this device outdoors including cables.
(5) Do not install this device in direct sunlight or near a heater such as a stove. Otherwise it may cause malfunction or fire.
(6) Do not use this device when it is completely sealed with plastic bag nor wrap, etc. Otherwise it may cause overheating, malfunction or fire.
(7) This device is not dustproofing. Therefore, do not use it in dusty locations. Otherwise it may cause overheating, malfunction or fire.
(8) Do not perform a violent action such as hitting, dropping, or otherwise applying strong force to the machine. It may cause damage, malfunction, electric shock or fire.
(9) Do not let water or other liquids get stuck on the device. Also, do not touch it with a wet hand. Otherwise problems, it may cause malfunction, electric shock or fire.
(10) Disconnect the USB cable if an abnormal heat output or smell occurs while using the machine.
(11) Never disassemble or modify the unit. Otherwise problems, it may cause malfunction, electric shock or fire. Miwa is not responsible for any malfunction or damage caused by the user disassembling or modifying the unit.
(12) It may not work properly on metals such as ferrous metal.
(13) Multiple cards cannot be read or written at the same time. Miwa Lock Co., Ltd. 5 / 9 ALV3 Card Encoder without Print Function User Manual Caution:
Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the unit. USA-Federal Communications Commission (FCC) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This unit complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This unit may not cause harmful interference, and
(2) This unit must accept any interference received, including interference that may cause undesired operation. Responsible Party U.S. Contact Information MIWA LOCK CO.,LTD. USA Office 9272 Jeronimo Road, Suite 119, Irvine, CA 92618 Telephone1-949-328-5280 / FAX1-949-328-5281 Miwa Lock Co., Ltd. 6 / 9 ALV3 Card Encoder without Print Function User Manual Innovation, Science and Economic Development Canada ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference. operation of the device.
(2)This device must accept any interference, including interference that may cause undesired Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1)Lappareil ne doit pas produire de brouillage;
(2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Miwa Lock Co., Ltd. 7 / 9 ALV3 Card Encoder without Print Function User Manual Table 3.1. Product Specifications 3. Product Specifications Item Appearance Dimension Specifications Weight Cable Power supply Input voltage Current consumption MAX200mA Environment Temperature conditions 90[mm](W)80.7mm](D)28.8[mm](H) Approx. 95 [g] (including enclosure and cable) USB connector A Plug 5V supplied from USB Approx. 1.0m Operating temperature: Ambient 0 to 40[C]
Storage Temperature: Ambient-10 to 50 [C]
No freezing and no condensation Humidity conditions 30 to 80[%RH] at an ambient temperature of 25C No freezing and no condensation Standard VCCI Drip-proof specifications Not supported Class B Compliance Radio communication Inductive read/write communication equipment No.BC-20004 13.56MHz Card communication distance Approximately 12mm or more at the center of the card and Basic performance reader This varies depending on the operating environment and media used. ISO 14443 Type A (MIFARE, MIFARE Plus, etc.) USB2.0 (Full-Speed) Supported cards USB Supported Operating Systems Windows10 LED Buzzer 2 Color (Red, Green) Reference frequency: 2400 Hz Sound pressure Min. 75dB Miwa Lock Co., Ltd. 8 / 9 Appendix 1. Outside view of DWHL-V3UA01 main unit ALV3 Card Encoder without Print Function User Manual USB Connector Card access section 950 80.7 90 Status LED Miwa Lock Co., Ltd. 9 / 9