FCC ID: 2BKZNVZ-AB515-P SPEAKER BOX

FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC ID LABELING AND LOCATION FCC ID Label SPEAKER BOX FCC ID: 2BKZNVZ-AB515-P FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. that prohibit equipment authorization TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Miyako USA Grantee code: 2BKZN FCC ID: 2BKZNVZ-AB515-P FRN: 0035930122 Contact Name: Alejandro Rodriguez Address: 1598 NW 108th Avenue Miami, Florida United States 33172 Telephone No: 305-594-7855 Fax No: /

Email: [email protected] i. ii.

[Miyako USA] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Miyako USA] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification.

[Miyako USA] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing covered equipment . Date: 2024/11/29 Applicants Name: Alejandro Rodriguez Title:COO Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.2 Miyako USA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-11-29 Subject: Request for Confidentiality FCC ID: 2BKZNVZ-AB515-P To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential 1/1 C5266091_X10_Ed.2 documents and those information will be available for public review once the grant of equipment authorization is issued. Signature:

Name: : Alejandro Rodriguez Title: COO Date: 2024-11-29 1/1

Miyako USA Product Similarity Declaration Product name: SPEAKER BOX Model name: VZ-AB515-P, FU-PRO1590, FU-PRO1290, FU-PRO15500, VZ-AB15300, VZ-HLKIT313-P, VZ-AB828, VZ-AB1028 FCC ID: 2BKZNVZ-AB515-P We (Miyako USA) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature:

Name: : Alejandro Rodriguez Title: COO Signature of applicant:

Date: 2024-11-29

C5266091_X8_Ed.1 Letter of Authorization Miyako USA 2BKZNVZ-AB515-P Company: Miyako USA Address: 1598 NW 108th Avenue Miami, Florida United States 33172 Product Name: SPEAKER BOX Model Number: VZ-AB515-P, FU-PRO1590, FU-PRO1290, FU-PRO15500, VZ-AB15300, VZ-HLKIT313-P,VZ-AB828, VZ-AB1028 FCC Identifier:

We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Signature:

Name: : Alejandro Rodriguez Title: COO Signature of applicant:

Date: 2024-11-29 1/1

US Agent for Service of Process LETTER OF ATTESTATION 0035930122 Alejandro Rodriguez 1598 NW 108th Avenue Miami, Florida United States 33172 305-594-7855

TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Miyako USA FRN: 0035930122 Contact Name: Alejandro Rodriguez Address: Address: 1598 NW 108th Avenue Miami, Florida United States 33172 Telephone No: 305-594-7855 Email: [email protected] Applicant:

Company name: Miyako USA Product Description: SPEAKER BOX Grantee code: 2BKZN FCC ID: 2BKZNVZ-AB515-P FRN:

Contact Name:

Address:

Telephone No:

Fax No:

Email: [email protected]

[Miyako USA] certifies that, as of the date of this filing of the application with the TCB, [Miyako USA] is our designated US agent for service of process for the above referenced FCC ID. [Miyako USA] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Miyako USA] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicantis aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2024/11/29 Applicants Name: Alejandro Rodriguez Title: COO Signature US Agents Name: Alejandro Rodriguez Title: COO Signature 1/1