FCC ID: RZO-AT-VMMS Wireless charger

ENGLISH ENGLISH ENGLISH ENGLISH MAGNETIC WIRELESS CHARGING VENT MOUNT has been tested and found to comply device, to provide to Part 15 of the FCC reasonable protection pursuant in a residential radio frequency installation. energy and, if not This equipment uses and can radiate These limits harmful equipment for a Class B digital are designed interference FCC STATEMENT:This with the limits Rules. against generates installed harmful guarantee this equipment reception, on, the user is encouraged more of the following and used in accordance interference that interference measures:

to radio communications. may cause with the instructions, there is no will not occur in a particular If installation. does cause harmful interference by turning to radio or television the equipment by one or off and the interference to try to correct However, which can be determined the receiving or relocate the separation the equipment Reorient Increase Connect to which the receiver Consult between the equipment into an outlet is connected. or an experienced antenna. radio/TV the dealer on a circuit and receiver. from that different technician for help. LIMITED WARRANTY Thank you for purchasing a Autotech product from Mizco international, Inc. We want you to enjoy this product without any problems. However, in the unlikely either repair or replace it as part of the product's we will event that it malfunctions, 5 year limited warranty. If the product has malfunctioned during normal use, the responsibility of Autotech is limited solely to the repair or at its option, of the product. replacement, not extend to damage or failure neglect, maintenance. accidents, alteration, does This warranty from misuse, or that results abuse, improper installation is subject 15 of the FCC rules. This device complies with part two conditions:

to the following Operation interference, 1. this device may not cause harmful and 2. this device must accept any interference received, interference CAUTION:

party responsible operatethe equipment that may cause undesired Changes or modifications for compliance operation. not expressly could void the user's approved to by the authority including Thisequipment complies with FCC radiation foranuncontrolled environment. exposure limits setforth All brands represented herein are registered trademarks of their respective manufacturers. Design and specifications are subject to change without notice. 1. Press the quick release button to open the grips and lock the mount securely to the vent. Press button again to release. 2. Turn knob to lock the phone holder in place. The mount can AT-VMMS RF Exposure Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the 4. Plug the cable into the port and the other side into your car device and 20 cm above the top surface of the device must be respected

. located or operating in a cases. For non Apple phones you can use the ring plate (included) USB to charge wireless. 3. Magsafe compatible to attach to phone mount. or higher without magnet, securely holds your iPhone 12 turn 360 degrees. IC CANIECS-003/NMB-003 FCC ID:RZO-AT-VMMS Mizco International, All trade names are registered Inc. All rights reserved. ofthe trademarks respective Mizco International listed. Inc., Cranford, NJ 07016 manufacturers techsupport@mizco.com www.mizco.com www.toughtested.com

Mizco International Inc. 80 Essex Avenue East Avenel, NJ 07001 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-5-29 To whom it may concer:

We, Mizco International Inc., hereby certify that the equipment for which authorization is sought (FCC ID: RZO-AT-VMMS) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (httos://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and ()(5) and (6). Sincerely, paves Signature Albert Mizrahi manager Mizco Intemational Inc. The information provided inthis eter is based on the referenced rle parts of Tile 47 of the CFR as well as KDB 986446 DOI.

Mizco International Inc. Add: 80 Essex Avenue East Avenel, NJ 07001 United States Date: 2023-5-29 FCC ID: RZO-AT-VMMS Dear Sir/Madam, We, Mizco International Inc. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Wireless charger Model no.: AT-VMMS, E-WL-20-62-XCT Sincerely, yet, nish Name/Title: Albert Mizrahi/manager

: Mizco International Inc. 80 Essex Avenue East Avenel, NJ 07001 United States 17329122000 Albertm2@mizco.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-5-29>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name

(MMS RZO-AT-VMMS A For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up moOooARRoo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Barts ties Albert Mizrahi/manager Mizco International Inc. 80 Essex Avenue East Avenel, NJ 07001 United States 17329122000 Albertm2@mizco.com

Mizco International Ine. 80 Essex Avenue East Avenel, NJ 07001 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-5-29 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: RZO-AT-VMMS including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, port: Hes Name/Title: Albert Mizrahi/manager Mizco International Inc. 80 Essex Avenue East Avenel, NJ 07001 United States 17329122000 Albertm2@mizco.com

Mizco International Inc. 80 Essex Avenue East Avenel, NI 07001 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 6/6/2023 U.S. Agent Designation Mizco International Inc.acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: RZO-AT-VMMS):

Name and company of U.S. agent: Mizco International Inc. Physical U.S. address of agent: 80 Essex Avenue East Avenel, NJ 07001 United States, FRN of U.S. agent: 0022407209 Email address of U.S. agent: Albertm2@mizco.com izco International Inc. acknowledges their obligation to accept service of process on behalf of izco International Inc.. Mizco International Inc. with the FRN 0022407209 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, f Any k UN aber ee bibert woe Signature Signature Albert Mizrahi Albert Mizrahi manager manager Mizco International Inc. Mizco International Ine. The information provided in this eter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DOI. An expiration date fr ths letter does nt exist Incase the US. agent changes, the grance is obligated to notify the FCC within 30 days via the granting TCE