|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2019-06-27
|
|
1 2 3 4 5 6 7 8
|
2019-06-26
|
|
1 2 3 4 5 6 7 8
|
2019-06-13
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
MobileHelp, LLC
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0022105803
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
5050 Conference Way N
|
|
1 2 3 4 5 6 7 8
|
Boca Raton, Florida 33431
|
|
1 2 3 4 5 6 7 8
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
t******@siemic.com
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
PXT
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
201706SC20A
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
R******** F******
|
|
1 2 3 4 5 6 7 8
|
Title |
President
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
561 3********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
561 3********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
r******@go-m3.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | No |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | No |
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/24/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 | PCB - PCS Licensed Transmitter |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 8 | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | C2PC to add MobileHelp Tablet Base Station and reduce power via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is <0.10 W/kg and 1.09 W/kg respectively.
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | C2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.14 W/kg and 1.20 W/kg respectively.
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | C2PC to add MobileHelp Tablet Base Station and reduce power via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.21 W/kg and 1.31 W/kg respectively.
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | C2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 1.06 W/kg and 1.31 W/kg respectively.
Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
| 1 2 3 4 5 6 7 8 | Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
A Test Lab Techno Corp.
|
|
1 2 3 4 5 6 7 8
|
Name |
J****** L******
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
88632******** Extension:
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
88632********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
j******@atl-lab.com.tw
|
|