FCC ID: PXT-DC-HBWM2-02 Wall Mount Button IP67

Waterproof Wall Button When used in conjunction with MobileHelps Cellular Base Station and/or Mobile Device, the waterproof Wall Button allows you to obtain emergency help with the press of a button. The Wall Button can be mounted on a flat surface such as a wall or placed on a table top. Mounting hardware and two-sided tape is included. The Wall Button has an LED Light that will communicate the following:

Light Indicator What it Means When you press your emergency Wall Button, the LED light will flash red. RED AMBER When the battery level is low, the LED light will blink amber. LED Light Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MHP-06676B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. For body worn operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. ISED - Canadian Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Avis Canadien Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Radiation Exposure Statement:

1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 2. For body worn operation, this phone has been tested and meets RF exposure guidelines when used with an accessory that contains no metal. Use of other accessories may not ensure compliance with RF exposure guidelines. Dclaration de lexposition aux radiations RF:

1. Pour se conformer aux exigences de conformit RF canadienne lexposition, cet appareil et son antenne ne doivent pas tre co-

localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. 2. Pour le fonctionnement du corps, ce tlphone a t test et rpond aux directives dexposition RF lorsquil est utilis avec un accessoire qui ne contient pas de mtal. Utilisation dautres accessoires peut ne pas assurer le respect des directives dexposition RF. MHP-06676B

Propose Label Design YY QDIZZZZZ-X Model: DC-HBWM2-02 FCC ID: PXT-DC-HBWM2-02 IC: 10876A-DCHBWM202 MobileHelp Made in Malaysia

MobileHelp, LLC 5050 Conference Way N, Suite 125, Boca Raton, FL 33431, United States Of America SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia Uli cremey ely Mobilehelp, LLC 5050 Conference Way N, Suite 125 Boca Raton FL 33431 United States of America Regarding: Confidentiality Request regarding application for FCC ID PXT-DC HB 2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby req confidential treatment of the documents listed below, associated with the certificat ne eferenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until tn we(-W looms marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days o the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Schematic(s}

Block Diagrams ere el Description External Photos Internal Photos Test Setup Photo User manual(s) Sincerely, Robert Flippo President Mobilehelp, LLC i nappicaion

MobileHelp, LLC 5050 Conference Way N, Suite 125, Boca Raton, FL 33431, United States Of A Date: 2019/1 2/4 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: PXT-DC-HBWM2-02 To whom it may concern:

We, the undersigned, hereby authorize SGS Taiwan Ltd. to act on our behalf in atl manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., stil resides with <<Mobilehelp, LLC>>. This authorization is valid until further written notice from the applicant. Name (Printed): Robert Ftippo BI com adcktlo(s014 Signature:

On behalf of Company: Mobilehelp, LLC 347-6255