REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 ATTACHMENT E.
- USRS MANUAL MPP-100 User Guide FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 I .Summary MPP-100 USB Device have normal PC soundcard function and Data Storage function. a. Sound Card function b. Support Stereo 2.1channel Dolby output c. AGC(Auto Gain Control) basic institution function d. Support Mike input(support 8bit, 16bit sampling ) e. Supply separate Exterior speaker output port HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 f. Volume adjustment function g. Speaker & MIC mute function h. Support Ear-Mics in/output
. Specification
* MPP-100 Specification Part Description USB Spec USB Version 1.1 Operating Power USB Self Bus Power USB Connector A Type to PC & Mini A Type to Module USB Cable 1.2mm Shield Cable with Core Speaker Jack 3.5pie Stereo Plug Microphone Jack 3.5pie Mono Plug Ear-Mic 2.5pie Mono Plug Audio S/N Etc MIC : 11k, +22.5dB Input : Mono 8~16 bit SPE : 32, 1130mVrms Output : Stereo 24 bit A/D : 92dB , D/A : 96dB Volume Up & Down Switch Speaker Mute & MIC Mute Switch 79mm x 44mm x 14mm Size
I. Composition Check your MPP-100 package for the following item-list. 1. MPP-100 2. Software & Driver support CD 3. 1.2m USB Cable 4. User Guide HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 5. Quick Setup Guide IV. Installation 1. What is USB ?
It is a initial of Universal Serial Bus. It is developed spec. easily to connect between PC and PC circumference . It can transfer data quickly and has Plug & Play function. 2. Check the Circumstance of Utilization You can use this product under over Windows 98 SE , Linux, Mac OS9 operating system.
Do you have USB port in your PC?
If you use Celeron or Pentium /, you have 100% of USB port. There are two USB port which are located beside keyboard and mouses plug in the rear of computer. But it is possible to have USB port in front of computer, if your computer is a new style.
Wait! How to find USB port
Is your Operating system(OS) over Windows 98SE?
s mark is USB port, has to plug USB connecter. If you have over Windows 98SEOS, it can be recognized USB automatically regardless of a separate driver. But sometimes Installing driver can be possibly to need a original CD. 3. Product picture 1) MPP-100
Mini USB port
Power Display Lamp
MIC Mute Display Lamp HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 2) USB Cable
MIC Mute Button
Volume Up & Down Button
EarMIC Jack
Microphone Jack
Speaker Jack
Speaker Mute Button
Speaker Mute Display Lamp 4. How to Install MPP-100 1) Connect offered USB Cable to PC and MPP-100. 2) If your PC O/S is a standard Windows XP, there is a general recognition procedure of new hardware on the Taskbar.
[Picture4-1]
[Picture 4-3]
[Picture 4-2]
[Picture 4-4]
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 4-5]
[Picture 4-7]
[Picture 4-9]
[Picture 4-11]
[Picture 4-6]
[Picture 4-8]
[Picture 4-10]
[4 Picture -12]
After proceeding as above procedure, it will be displayed as [Picture 13]. It means the recognition of MPP-100 hardware is done.
[Picture 4-13]
Now user can use MPP-100. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 5. Check Installing a MPP-100 1) Device Manager Check
(1) After mouse pointer move from My computer to Properties on the menu as [Picture 5-1], click the right of mouse. Then it will be showed the window of System Properties as [Picture 5-2].
[Picture 5-1]
[Picture 5-2]
2) After clicking Hardware on System Properties as [Picture 5-2], select Device Manager. Then it will be showed the window of Device Manager as [Picture 5-3]. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 5-3]
If showed above marked information as [Picture 5-3], it means MPP 100 is recognized correctly. 2) Control Panel Check
(1) After clicking start on the Taskbar, select Control Panel on menu. Then it will be showed the window of Control Panel as [Picture 5-4].
[Picture 5-4]
Click Sound Menu on the Control Panel as[Picture 5-4], then it will be showed the window of Sounds, Speech, and Audio Devices as [Picture 5-5].
[Picture 5-5]
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 Click Sounds, and Audio Devices on the menu of Sounds, Speech, and Audio Devices as [Picture 5-5]. Then it will be showed the window of Sounds, and Audio Devices Properties as [Picture 5-6].
[Picture 5-6] [Picture 5-7] [Picture 5-8]
If there is each of UAC3556B mark on the Volume menu as [Picture 5-6], on the Audio menu as [Picture 5-7], on the Voice menu as [Picture 5-8], it means MPP 100 is recognized correctly. 6. How to remove MPP-100 1) After Mouse Pointer move to Show hidden icons, click the left side of mouse on the marked icon as [Picture 6-1]. Then it will be showed Message bar as [Picture 6-2].
[Picture 6-1]
2) Click Message bar as [Picture 6-2].
[Picture 6-2]
3) If you have the message of Safe To Remove Hardware as[Picture 6-3], MPP-100 can be removed from PC. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 6-3]
Cautio If you forcibly remove MPP-100 from PC without above procedure, be careful to damage on stored MPP 100 data. 7. How to use MPP-100 and How to test functions 1) How to use MPP-100 Similar usage to general sound card of PC
(1) Make sure of connection between PC and MPP-100.
(2) If there is a Red lamp on MPP-100, it means correctly connected.
(3) Connect the terminal of general speaker or headsets speaker to spk on the left side of MPP-100.
(4) Connect the terminal of general Microphone or headsets microphone to MIC on the left side of MPP-
100.
(5) Connect the terminal of general 2.5 pie earset or served earset to EARSET on the left side of MPP-
100. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[The Description of Picture ]
[Picture 7-1]
- Mute ON : Press spk button one time, operated with Yellow Lamp.
- Mute OFF : Press spk button one more time, operated without Yellow Lamp.
(6) The description of functions a. spk Button : spk button has Speaker mute function. If mute is on, there is no sound-output from connected device because only mute function is operated in the MPP-100 except for sound from EARSET port. b. Mic Button : Mic button has MIC mute function. If Mute is on, there is no sound-input from connected device because all mute functions of MIC port and EARSET port are opercated in the MPP-100. c. +/- vol Button : +/- button has the function of adjusting volume.
- Mute ON : Press Mic button one time, operated with Orange Lamp.
- Mute OFF : Press Mic button one more time, operated without Orange Lamp.
- Press +/- buttons + once or continuously , increase sound-output volume.
- Press+/- buttons - once or continuously, decrease sound-output volume. 2) The advanced function of MPP-100
(1) How to output user voice Click start -> All Programs -> Accessories -> Entertainment -> Volume Control on the Taskbar menu as
[Picture 7-2] in order, it will be showed the window of speaker as [Picture 7-3]. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 7-2]
[Picture 7-3]
Click Options on the [Picture 7-3] as [Picture 7-4], select Properties. Then it will be showed the window of properties as [Picture 7-5]. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 7-4]
[Picture 7-5]
Select Microphone in the Show the following volume controls as [Picture 7-5], click OK button. Then it will be showed the window of Speaker as [Picture 7-6]. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 7-6]
According to Microphone setting up as [Picture 7-6], adjust voice-output of user.
- Setting up by Mute : It doesnt come out user voice from speaker, but mic is generally operated.( Possible to communicate with contact in the chat program as messenger)
- Volume : According to height of Volumes bar, increase/decrease volume.
(2) How to output advanced controls of Speaker Click the window of Speaker same as How to output user voice on the [Picture 7-6].
[Picture 7-6]
After clicking Options, Advanced Controls in order as [Picture 7-6], it will be showed the window of HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003 Advanced Controls for Speaker as [Picture 7-7].
[Picture 7-7]
You can adjust sound quality in the Advanced Controls for Speaker as [Picture 7-7]. After adjusting, if press Close button, setting up is completed.
(3) How to test MIC Click start -> All Programs -> Accessories -> Entertainment -> Sound Recorder on the Taskbar menu in order same as [Picture 7-2] of How to output user voice, it will be showed the window of Sound-Sound Recorder as [Picture 7-8]. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr REPORT NO : HCT-F03-1206 FCC ID : RQXMPP-100 DATE :DECEMBER 30,2003
[Picture 7-8] [Picture 7-9]
Press Recording Button as [Picture 7-8], it will be started recording as [Picture 7-9]. If recording is completed or press the Stop Button in the middle of record, it will be showed as
[Picture 7-10].
[Picture 7-10] [Picture 7-11]
If you want to listen to the recorded, press Play Button as[Picture 7-11], then it will be started to play the record.
(4) How to test Speaker If you want to test sound-output form speaker normally, play stored audio file with general Audio and Media player as general PCs Sound Card. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr