TPMS Installation Manual
(1) Dismount tire and sensor from the wheel. And clear valve stem hole in rim of any corrosion or dirt. p.s. The below steps (2)~(5) is just to verify if our sensor can be compatible with your selected vehicle before installing into the tire.
(2) Please use the ATEQ, Bartec or other TPMS scan tools to check and verify sensor
(3) Vehicle Selection (Model, Year,) 1
(4) Tire Select (Choose the tire position)
(5) Trigger the sensor (press the TEST button) If succeed, the Pass button be shone. Once it shows Fail, it could mean the sensor cant fit to the selected vehicle or other product issues.
(6) Push the valve stem thru the rim, install the washer and nut, then tighten the nut to 36 in-lb (4 N.m) 2
(7) Hold the sensor body against the rim and install then tighten the screw to 20 in-lb (2.2 N.m).
(8) Mount the tire back to vehicle. 3
(9) Follow OE re-learn procedures Please refer to the standard re-learn procedures issued by the selected carmakers.
(10) Finish As long as the sign is removed from the dashboard
, it means TPMS installation is finished.
(11) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to thee following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired. Information to user The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. 4 TX-P001, TX-P002 Transmitter Specification Frequency Pressure Range 315 / 433 MHz 0 ~ 350 KPa / 0 ~ 800 KPa
(Varied by Vehicles Models) Temperature Range Operating Humidity Operating Temperature Storage Temperature
-40 ~125 Max. 95%
-40 ~105
-40 ~125 Dimensions (Valve Included) 78.5 (L) x 30.8 (W) x 19 (H) mm Weight (Valve Included) 46 g Adjustable Angle 0~40 Degrees 5