CR1215A 1. Power On the unit Press POWER button on panel or remote control LED back light ON, default function is Radio tuner 2. Radio Mode Press POWER button, default is radio, LCD shows TUNER and channel XX.XX. Auto Search Station: Long press SCAN button (Panel or remote control), it will search stations automatically Single Search Station: Long Press PREV/NEXT button (Panel or remote control) to search station, once a station searched, it will be stop. Select the saved station: In the radio mode, press PREV/NEXT to select station
(CH/CH+ on remote control) AM/FM Switch: Press AM/FM button to switch channel 3. CD Mode Press INPUT button until CD Mode, LCD shows CD. Press OPEN/CLOSE button to open CD Door, place your CD and Press OPEN/CLOSE button to close CD Door. LCD shows READING during reading CD. It will play the CD automatically once finished reading. Press STOP button to stop playing Press REPEAT button to set REPEAT ONE or REPEAT ALL. Press RANDOM button to play music randomly PROGRAM: During stop, press PROGRAM button, LCD shows total songs + PXXXX, press PREV/NEXT button to select the song, press PROGRAM to confirm and then select other songs. After program, press PLAY button to play music 4. Bluetooth Function Press INPUT button until Bluetooth Mode, LCD shows BT. Switch on your mobile device Bluetooth function, and search Bluetooth Name CR1215A and connect. Once success, small bt flash in display. Press PLAY button to play music. Press PAIR button to disconnect current device and ready to connect other devices 5. AUX IN Mode Press INPUT button until AUX IN mode, LCD shows AUX. Insert AUX in cable and connect your device and play music 6. LIGHT Mode Power On the unit, short press LIGHT MODE button (Panel or remote control), select different light flashing mode. During flashing, press twice LIGHT MODE button, it can lock in certain color. Long press LIGHT MODE to switch off lighting In the Box 1. Main unit 2. Adaptor 21V/3A 3. Remote control 4. AUX in cable Speaker: 15W x 2 Bluetooth distance: 10Meter without any blocking FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.