Molekule Air Mini User Manual 01 Best Practices Try it in the bedroom. clean, sleep-breathing zone. Run it 24/7. So keep fresh air flowing. Molekule Air Mini will work in any room, but giving it space in a central location, and on a shelf, stand, or table will help maximize air intake. Its designed for rooms under 250 sq. ft. We recommend running it in the bedroom, closer to your bed for a Constantly clean air is a good thing, plus, your Molekule Air Mini is low energy. 02 Setting Up Twist off shell and Unwrap PECO-Filter Align logo on shell with Unwind cord and Once WiFi light is Download the Molekule pull out PECO-Filter. and place on base. arrow on base. Close shell plug in. pulsing, youre ready to app to complete setup and twist to lock. pair to the app. and set up device control from your phone. 03 Controls & Interface 04 Modes & States Theres just one button. Its on top, in the center of the display. Tap it to wake the device, and cycle through fan speeds. A long press of 3 seconds puts it on standby, which deactivates the fan, UV-A lights, and display lights. Fan Speeds Your devices five fan speeds correspond to the number of dotted white lights. Tapping the button cycles through speeds. Fan speeds PECO-Filter status WiFi status Press here PECO-Filter Status The PECO-Filter status indicator helps you track the replacement schedule for your PECO-Filter. Keeping your Molekule Air Mini connected to WiFi lets you track this information on your app. An orange pulsing light indicates when your PECO-Filter is nearing recommended replacement time. If the PECO-Filter hasnt been replaced for an extended period of time, your device will go on standby, and the PECO-Filter Status and fan speed lights will pulse as a reminder to replace immediately. You can restart Molekule Air Mini from the app, or by tapping the button on your device. Molekule Air Mini will continue to go on standby after extended use until the PECO-Filter is replaced. If the PECO-Filter Status Indicator is off, theres no need to replace your PECO-Filter. A red pulsing light indicates when your PECO-Filter has reached recommended replacement time. Replace the existing PECO-Filter. WiFi Status Each time you plug in your device or lock its shell into place, it checks the authenticity of the PECO-Filter. The light will pulse white while in progress. If it turns green, its confirmed as a certified Molekule PECO-Filter and will run normally. If it turns red, the PECO-Filter has not been verified and the device will not start. Upon powering the device (after setup), this indicator will pulse white while the device searches for a connection. Once it has connected successfully, the indicator will briefly turn green. If the WiFi status indicator turns red, an issue with your WiFi is prohibiting your device from connecting. If this indicator is off, your device has successfully connected. If it stops pulsing and turns solid white, its paired to your phone, but hasnt been connected to WiFi. 05 How do I replace the PECO-Filter?
User Servicing Instructions With the base on a steady surface, Lift used PECO-Filter off device Remove new PECO-Filter from Place device shell back onto base twist device shell counterclockwise base and discard. packaging and place onto base with and twist clockwise to click into and lift to open. small hole face down, as indicated place. Good work. on PECO-Filter. Were here to help you breathe easier. If you have issues with your device, filter, app How do PECO-Filter auto-refills work?
06 Help & Support or account. Visit us https://help.molekule.com Call us seven days a week 8am-5pm PT
+1 (855) 999-9069 07 Frequently Asked Questions Molekule Air Mini ships with one PECO-Filter. We offer PECO-Filter auto-
refill plans to help ensure you have clean air when you need it. PECO-Filters are automatically shipped to your doorstep. To start or manage your auto-refill plan, go to Molekule.com How do I reset my device?
To reset your device, hold the center button on the device for 10 seconds. Your device will return to its out-of-box settings, and the device name and all WiFi settings will be deleted. To reconnect your device to WiFi, open the Molekule mobile app, go to More
> Add device, and follow the prompts. Why does my device keep turning off?
If the filter hasnt been replaced for an extended period of time, your device will turn off, and its fan speed lights and filter status indicator will pulse as Molekule Air Mini does not require the Molekule app to function?
The device will work just as effectively without being connected to WiFi. Connecting your device lets you control it remotely from your smartphone a reminder to replace the filter immediately. through the app and see your filter health. You can restart Molekule Air Mini by tapping the button on the device. Why is my device unresponsive, and my WiFi and PECO-Filter status device ships with a small bag of natures oldest purifier: activated carbon. warranty and how to get a replacement unit. Why does my device come with a bag of activated carbon on top?
To reduce the presence of volatile organic compounds (VOCs) in the air before youve had a chance to plug in your new Molekule Air Mini, each new Once your device is plugged in, you can reuse the bag. To rejuvenate it, simply leave it outside in direct sunlight for at least an hour once a month. Itll then be ready to help deodorize your fridge, pets room or anywhere else you have odors. indicators pulsing red?
Something has triggered a fatal error. Unfortunately, your device is no longer operational. Contact Molekule Customer Support from 8am-5pm PT seven days a week at +1 (855) 999-9069 to see if your device is under Why wont my device power on?
these recommended steps:
If you touch the device button and the lights or fan dont turn on, follow Make sure the device is plugged into a working outlet. Make sure the PECO-Filter inside the device is unwrapped. Make sure your PECO-Filter has been verified by inserting it into the device, twisting the device shell closed, and waiting for the PECO-Filter Status Indicator light to turn green. 08 Safety Precautions & Warnings Never place any objects on top of the unit. Do not place the unit directly below a shelf and other objects that might hinder the exiting air flow. Never cover vents while the unit is running. Avoid dropping the device or placing the device on an uneven or potentially unstable location. To help ensure stable placement of the device and limit risk of tipping, only place on stable, flat floor surfaces and make sure the cord is fully clipped into the cord holder. Do not insert or drop any foreign objects or liquids into the device. If either happens, immediately unplug the device and contact customer service. If the device is responding to external communication resulting in unwanted or unexpected behavior, unplug the device and contact customer service regarding the integrity of your account. 09 Limited Warranty Information Do not alter, clean or tinker with the PECO-Filter. Changes or damage to the PECO-Filter may interfere with proper operation. The LEDs in your Molekule Air Mini are meant to last the lifetime of the product. Do not attempt to repair nor replace these LEDs without explicit instruction and approval from Molekule. Do not clean the device with any liquid cleaning agents or water. These items pose a fire, electric shock or injury risk. The device should only be cleaned using a dry cloth. Do not operate any device with a damaged power cord or plug. Discard fan or contact Molekule Customer Support for examination and/or repair. Do not run the power cord under carpeting or cover the cord with throw rugs, runners or similar coverings. Do not route the cord under furniture or appliances. Keep the cord away from high-traffic areas to avoid a tripping hazard. Molekule warrants that for a period of two years from shipment, the Product will be free from defects in materials and workmanship under normal use in accordance with the documentation provided with the Product. In the event of a defect, visit Molekule at molekule.com/contact for return instructions.Molekules sole obligation under this warranty will be at its option to repair or replace the Product and the replaced product will be warranted for the remaining period of the original warranty. Replacement products may contain new or refurbished parts. This warranty does not apply to Products damaged by misuse, accident, electrical disturbance or normal wear and tear. The Product is not designed for or warranted against damage from use in areas subject to extreme temperature, excessive moisture, or other inherently hazardous environments. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. EXCEPT FOR THE LIMITED EXPRESS WARRANTIES SET FORTH ABOVE, MOLEKULE DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
FCC Radiation Exposure Statement:
(1) This device may not cause harmful interference, and (2) this device must accept any interference This equipment should be installed and operated with minimum distance 20cm between the radiator &
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. received, including interference that may cause undesired operation. NOTE: This equipment has been your body. tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void the These limits are designed to provide reasonable protection against harmful interference in a residential users authority to operate the equipment. installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Responsible party: Molekule Inc. 1301 Folsom Street, San Francisco, CA 94103 However, there is no guarantee that interference will not occur in a particular installation. If this equipment Phone Number: +1 (855) 999-9069 FCC Statement 10 does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 11 IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science IC Radiation Exposure Statement:
and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled conditions:
environment. This equipment should be installed and operated with minimum distance 20cm between 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. the radiator & your body. The transmitter module may not be co-located with any other transmitter or antenna. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR distance entre la source de rayonnement et votre corps. dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. 1. Lappareil ne doit pas produire de brouillage. 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Please Recycle v.1 READ AND SAVE THESE INSTRUCTIONS