all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Manual | Users Manual | 1.97 MiB | ||||
1 2 | Operational Description | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Operational Description | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report |
1 2 | Manual | Users Manual | 1.97 MiB |
128 8001 1.01 US English Operating Manual Funkwerk Dabendorf reserves the right to modi cations in the course of technological progress and deviations from the delivery scope! All rights reserved! Reproduction, in whole or in part, is only permitted with the prior written consent of Funkwerk Dabendorf GmbH!
EGO TALK 1 List of contents 1 2 3 4 5 6 6.1 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 6.2 6.2.1 6.2.2 6.2.3 6.2.4 6.3 6.3.1 6.3.2 6.3.3 6.4 6.5 6.5.1 6.5.2 LIST OF CONTENTS LIST OF ILLUSTRATIONS INTRODUCTION / FOREWORD SAFETY NOTES SCOPE OF DELIVERY / PACKAGE CONTENT INSTALLATION GUIDE Determination of required con guration Vehicle Telephone Muting (Radio Muting) Upgrading existing Funkwerk hands-free installations to EGO TALK Add-on speakers / car audio telephone connection Car audio line-in Installation locations Checking cable lengths Selection of the point of installation for the electronics box Selection of the point of installation for the microphone Selection of the point of installation for the control console Installation Mounting the electronics box Mounting the microphone Mounting the control console Connection scheme Installation of the ISO connecting cable Checking the mute inputs Checking the installation 3 5 6 7 8 9 9 9 9 9 9 10 10 10 10 10 11 12 12 12 13 13 14 16 16 18 2 | 3 6.5.3 6.6 6.7 7 7.1 7.1.1 7.2 7.3 7.3.1 7.3.2 7.3.3 7.3.4 7.4 7.4.1 7.4.2 7.5 7.5.1 7.5.2 7.5.3 7.5.4 7.6 8 9 10 11 12 13 Additional external speakers Connecting the components to the electronics box Operational test OPERATING MANUAL Features Overview of features Symbols Getting started About Bluetooth technology On / Off function Coupling Automatic connection Calling Incoming call Outgoing call Audio Player Coupling Play / Pause Stop Skip features Volume SERVICE SPARE PARTS AND ACCESSORIES TECHNICAL SPECIFICATIONS CERTIFICATION CONFORMITY STATEMENT HOTLINE EGO TALK 18 19 21 22 22 22 22 24 24 25 25 25 26 26 26 26 26 27 27 27 27 28 30 32 32 33 35 2 List of illustrations Fig. 01 Fig. 02 Fig. 03 Fig. 04 Fig. 05 Fig. 06 Fig. 07 Fig. 08 Fig. 09 Fig. 10 Fig. 11 a/b Fig. 12 Fig. 13 Scope of delivery Signal orientation of Bluetooth antenna Installation location for electronics box Installation location for microphone Installation dimensions of electronics box Connecting the Mini-ISO-connector Installation procedure Type-dependent pin allocation Plug wiring scheme Connection system Changing power supply wiring Connecting external loudspeakers Connecting the electronics box 8 10 11 11 12 15 16 17 17 17 18 19 20 4 | 5 3 Introduction/Foreword Congratulations on your new EGO!
EGO TALK is the intelligent entry-level solution for telephone use in your car: simple to operate, elegant and compact with Bluetooth and audio enjoyment, too. EGO TALK has an integrated MP3 playback function for your mobile phone, your iPod or any other MP3 Player. Enjoy your favourite tracks on your cars audio speakers, in superb stereo sound. The installation of your EGO TALK in your car requires specialized knowledge and skills. We therefore recommend that the installation be performed by a quali ed professional. Before installation in your car, please make sure that your mobile phone is fully compatible with EGO TALK. If you are uncertain, please consult your dealer or a quali ed workshop. Our service team will also be happy to help you with any information you may require. Further information on compatibility between EGO TALK and various mobile phones can be found on our website. EGO TALK 4 Safety notes systems, your complete attention must be paid to the current traf c conditions. It is always advisable to avoid phone calls while driving in dif cult traf c situations!
and skills are required for installing the system. We strongly recommend that the system be installed by a quali ed professional. 1. Incorrect installation Incorrect installation may lead to damage to the units and/or your car! Specialized knowledge 2. Risk of injury Unsuitable installation locations may become a source of injury in an accident situation, or may inhibit the correct functioning of essential safety equipment. Please carefully read the notes in the Installation chapter carefully!
3. Risk of injury/material damage the removal of vehicle lining with sharp or pointed objects may lead to injuries or material damage. 4. Road safety risk Diverted attention can lead to dangerous situations in traf c. Even when using hands-free phone 5. Damage to airbags An incorrect installation location may cause damage to, or inhibit the correct function of, your airbags. Do not install the components within the deployment area of the airbags!
6. Insulation damage Damaged insulation can lead to equipment and wiring damage. The cables and leads may not be 7. Polarity and shorting damage Cables connected with reversed polarity, or in such a way as to produce a short circuit, can lead to serious damage to your equipment. Before commencing installation, make sure that the car battery is disconnected. 8. Damage to essential vehicle components Essential vehicle components or wiring can be damaged when drilling mounting holes or screwing in self-threading screws. Please make sure there is always suf cient space behind the 9. Interference with on-board electronics Despite the extreme protection against interference, incorrect installation 10. Appropriate use This equipment is intended solely for use with mobile telephones in motor vehicles. 11. Damage caused by inappropriate replacement parts Inappropriate spare or replacement parts may lead to malfunctions. Please use only the approved parts listed in the section Spares parts and accessories!
12. Road safety risk For your own safety, never initiate the coupling procedure while your vehicle is in motion!
can lead to interference with the vehicle electronic systems. Please read the vehicle manufacturers notes to this effect!
under tension when installed. Install the cables and leads in such a way as to avoid pinching or abrasion. screw holes and drilled holes!
6 | 7 5 Scope of delivery / package content
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
Electronics box Control console Microphone ISO-cable for connection to the car electrical system Adapter cable Self-adhesive pad Quick guide Safety manual
[1]
[4]
[3]
[6]
QUICK GUIDE EGO TALK 12 8 8 011 1 01
[7]
[2]
[5]
1. Safety Instructions Improper installation Improper installation may cause damages to the unit or to the v abilities. We therefore strongly recommend to have the installation one by a professional. 2. Personal injury Inappropriate places for the installation may cause personal injuries in Installation!
3. Personal injury / Material damage When you remove coverings or armature parts, sha 4. Negative effects on road safety Talking whil t d i Dont submit the connecting cables to pressure.
[8]
Fig. 01:
Scope of Delivery q PLEASE MAKE SURE THE CONTENT OF THE PACKAGE is complete. If any parts are missing, please dont hesitate to contact our service hotline team: +49 (0) 3377 - 316 233, Mon.Thurs 7.00 a.m.5.00 p.m., Fri. 7.00 a.m.4.00 p.m. EGO TALK 6 Installation guide 6.1 Determination of required con guration Before installation of your EGO TALK, please note which features and connection options are provided by your car audio system. It is advantageous when your audio has the following: a muting function, phone input and line-in. You can nd out which of these input options your audio system has in the documentation provided. 6.1.1 Vehicle The hands-free system may only be installed in vehicles with a negative grounded, 12 V electrical system. If no car audio is installed, an add-on speaker will be required. For the installation of the optional charging cradle, you will require a model-
speci c mounting that may be purchased from a specialist dealer 6.1.2 Telephone A Bluetooth-compatible telephone must be available for use with this system. You can nd a list of supported Bluetooth telephones online at www.fwd-online.de. 6.1.3 Muting (radio muting) The muting function (Radio Muting) ensures that the audio sound is turned off during telephone calls. The system supports the muting function. Your car`s audio documentation will show whether your car audio has a mute option. If your car audio is not equipped with a muting option, you can install the optionally available Stereo Mute Box to facilitate speaker muting. 6.1.4 Upgrading existing Funkwerk hands-free installations to EGO TALK The adapter cable is the ideal and simple solution for customers who already own a Funkwerk hands-free system (e.g. Audio 2000, 3000, Audio blue, Audio com, Audio compact) and would like to upgrade to EGO TALK. The adapter cable connects the ISO cable of your existing Funkwerk hands-free system to the EGO TALK. q NOTE! This simple upgrade is only possible for installations without a Stereo Mute Box. When installing your EGO TALK with a Stereo Mute Box, the ISO cable from the Stereo Mute Box is to be used for the connection to the cars electrical system. 8 | 9 6.1.5 Add-on speakers / Car audio telephone connection The cars loudspeakers are transferred to the system is by means of switch contacts. These are designed for a peak power handling of 35 W (Sinus). Loudspeaker power handling exceeding 35 W leads to premature wear on the switching contacts. For higher outputs, use the telephone connection of the car audio or a 5 W / 4-Ohm satellite speaker. This port is only designed for voice reproduction. 6.1.6 Car audio line-in input A car audio with a line-in input option is required for music reproduction in stereo. As an alternative to line-in, the car audio may have a mini-ISO port (block connector C), a 0.14 in jack socket or a RCA input socket. An appropriate adapter lead is required for the connection between the EGO TALK line-out and the line-in version of your audio system. If your car audio system has no line-in option, you can employ the optionally available Stereo Mute Box for stereo reproduction in combination with your cars front speakers. 6.2 Installation locations q RISK OF INJURY! Unsuitable installation locations may become a source of injury in an accident (or emergency braking) situation, or may inhibit the correct functioning of essential safety equipment. 6.2.1 Checking cable lengths Before youve securely installed the components, check that the installation locations have been selected in such a way that the cable length is suf cient to connect the individual components. electronics box 6.2.2 Selection of the installation location for the The Bluetooth antenna for the connection to the mobile phone is installed in the electronics box. The antenna transmits directionally towards the front. For this reason, EGO TALK Fig. 02:
Signal transmission of the Bluetooth antenna during installation, ensure that the antenna faces into the passenger cell (see Fig. 02). Vertical mounting is ideal. Metallic screening between the front panel and the passenger cell, such as metal or metallised plastic panels, are unsuitable and may interfere with the Bluetooth connection. Locations behind the dashboard or in a metal-
lined glove compartment are also unsuitable. A covering in plastic, fabric or wood presents no problems whatsoever. Suitable locations for the electronics box:
Passenger side, next to the middle console under the paneling, model-speci c installation console (dealer). Our suggested installation locations are shown in the illustration on the right. Further unsuitable locations are:
Leg and knee height, potential head impact zone, airbag in ation space, engine compartment 6.2.3 Selection of the point of installation for the microphone Suitable for the microphone:
Where voice can reach the microphone unhindered (distance between the speaker and the microphone should be approx. 13.78 in), on the A-column (between windshield and drivers side window), next to the drivers sun visor, on the dashboard Unsuitable for the microphone:
Close to the speakers (less than 31 in), under the dashboard, in the air stream from open windows or air vents. Fig. 03:
Installation locations for the electronics box Fig. 04:
Installation location for microphone The illustration shows one of the potential microphone mounting locations. Alternatively, the microphone may be attached to the sun visor with the clip provided. 10 | 11 6.2.4 Selection of the installation location for the control console Suitable for the control console:
In the space above the DIN installation shaft, close to the steering wheel (in an easily accessible and visible position) Unsuitable for the control console:
Airbag in ation space, potential head impact zones, out of reach of drivers reach 6.3 Installation q DAMAGE TO ESSENTIAL VEHICLE COMPONENTS! Essential vehicle components or wiring can be damaged when drilling mounting holes or screwing in self-threading screws. Please make sure there is always suf cient space behind the screw holes and drilled holes!
6.3.1 Mounting the electronics box Installation consoles for a number of car models are available from your dealer. These are designed to contain all the system components, including the electronics box. When it is not possible to use an installation console, please proceed as follows:
De ne the mounting points Making sure that there is at least 2.8 in space for the plug and socket connectors. Mark the positions for the xing screws. 5.12 in 1.77 in 2.76 in Fig. 05:
Electronics box dimensions EGO TALK Mounting the electronics box For mounting the electronics box, use four self-threading screws and appropriate washers. We recommend size ST 2,9x25 DIN 7981self-threading screws. These are ideal for the xing of the electronics box. Pre-drill the holes with a 0.08 in drill. 6.3.2 Mounting the microphone De ne the mounting location The microphone holder has a self-adhesive strip on the back. The mounting location should have the same form and area as the self-adhesive strip on the microphone holder. The location selected must allow the microphone cable to reach the electronics box! Position the microphone with the head facing towards the direction of speech. Cleaning and degreasing the mounting location The mounting location must be clean and free from grease and dirt/dust. Prior to installation, clean the area with a cleansing product containing ethyl alcohol. Only use products that do not damage plastics or varnished wood nishes and are themselves free of oils or grease. Unsuitable cleansers are, for example, lighter uid, acetone, turpentine, trichloroethylene and similar products. Attaching the microphone holder Peel off the protective backing from the self-adhesive strip. Hold the microphone holder at a distance of several millimetres (about a quarter of an inch) above the desired mounting location. Re-check the positioning. Re-positioning after mounting is no longer possible. Place the microphone holder on the mounting location and x by applying short and light pressure. Attaching the microphone Attach the microphone by sliding it into the holder and position the microphone head towards the direction of speech. 6.3.3 Mounting the control console De ne the mounting location The control console is mounted on a smooth service by means of the self-adhesive pad provided. Make sure that the location is within easy reach of the intended user. 12 | 13 Cleaning and degreasing the mounting location The mounting location must be clean and free from grease and dirt/dust. Prior to installation, clean the area with a cleansing product containing ethyl alcohol. Only use cleansing products that do not damage plastics or varnished wood nishes and are themselves free of oils or grease. Unsuitable cleansers are, for example, lighter uid, acetone, turpentine, trichloroethylene and similar products. Attaching the control console After de ning the appropriate cable direction on the back of the console, x it by covering it with the self-adhesive pad. Hold the control console at a distance of several millimetres (about a quarter of an inch) above the desired mounting location. Re-check the positioning. Re-positioning the console after mounting is no longer possible. Apply the control console to the proposed mounting location and x by applying short and light pressure. 6.4 Connection scheme Installation for call reception for a car audio system with a mute input but without a phone input With this connection option, voice playback is is emitted from the front right car speaker. During calls, the mute input blocks the car audio signal. q NOTE: Please observe the information in section 6.5.1 Checking the mute inputs on connecting the mute lead of the ISO connecting cable. Installation for voice playback with a car audio system with phone and mute input options With this connection option, voice playback comes through the car audio system speakers. During calls, the car radio output is switched to the phone input by the mute input In order to access the phone input of your car audio system, the speaker output of your EGO TALK must be connected to the phone input of your car audio system. The purple and green leads of the ISO cable must be connected to the car audio phone input for this option. The purple and green leads must be disconnected from the ISO connector. The green lead (pin 14 of the 14-pin plug) should be connected to Phone Out, and the purple lead (pin 7 of the 14-pin plug) to Phone In + of the Mini-ISO socket. For information on the phone connection options of your car audio system, please consult the manufacturers user manual. EGO TALK q NOTE: If your car audio system has different phone connection options from those mentioned here, please consult a quali ed professional for installation of the system. Furthermore, please read the section with information on connecting the mute lead of the ISO connection cable, 6.5.1 Checking the mute input. Fig. 06:
Mini-ISO connection 14 | 15 6.5 Installation of the ISO connecting cable The battery must be disconnected before starting cable installation. Disconnect the grounding cable from the negative pole of the battery. The cable installation procedure is shown in the illustrations. o i d u a r a C Fig. 07:
Installation procedure Connect EGO TALK ISO connectors to car wiring harness ISO connectors Disconnect car wiring harness from car radio x o b s c i n o r t c e l E Connect 14-pin ISO connecting cable to EGO TALK Connect EGO TALK ISO connector to car radio o i d u a r a C 2 3 Connect yellow mute lead to one of the three mute inputs
(see table) 1 4 When the installation is completed, reconnect the grounding cable to the negative pole of the battery. 6.5.1 Checking the mute inputs Picture 5 of Fig. 07 shows mute inputs 13. The yellow mute lead of the hands-free system should be connected to one of these inputs. Which mute input should be selected is shown in the tables:
EGO TALK Fig. 08:
Type-
dependent pin allocation Radio model Audi, Volkswagen, Grundig Radio model Ford, Mercedes, Porsche, Becker Radio model Blaupunkt Radio model Philips Wiring of power supply connectors Socket wiring from the rear (see table) Plug wiring from the rear 2 1 4 3 6 5 8 7 1 2 3 4 5 6 7 8 Socket contact housing Wire colour Function Mute blue red brown Ignition (15) Permanent positive (30) Ground (31) Socket contact housing Wire colour Function red blue brown Mute Permanent positive (30) Ignition (15) Ground (31) Socket contact housing Wire colour Function Mute red blue brown Permanent positive (30) Ignition (15) Ground (31) Socket contact housing Wire colour Function Mute red blue brown Permanent positive (30) Ignition (15) Ground (31) Pin 1 2 3 4 7 8 Pin 1 2 3 4 7 8 Pin 1 2 3 4 7 8 Pin 1 2 3 4 7 8 i i o o d d u a a r o r t a u C A x x o o b b s k c i n i n o o r r t t k c e e l l E E Fig. 09:
Plug wiring scheme s s e m n r u a a h b g l e n b i r a i K w
e Z l F c K i h e V Fig. 10:
Connection system 16 | 17 6.5.2 Checking the installation When the ISO connection cable is correctly installed, a call remains active until the call is ended, even if the ignition has already been turned off beforehand. The system switches off automatically when the call has been ended. If the system switches to off immediately switches off,then exchange the ignition lead (blue) with the power supply lead (red) as shown in Fig. 11b Abb. 11a:
View of original connection Abb. 11b:
View after changing cables q PLEASE NOTE: the fuses should remain in place when opening the fuse compartment, make sure that they are not inadvertently exchanged!
6.5.3 Additional external speakers In the following cases, additional speakers (4 , min. 5 W) must be used:
when the car audio system speakers should not be used when the output rating of the speaker channel is greater than 35 W (Sinus) and the car audio when the car audio system is used with active speakers and has no phone connection option system has no phone connection option Feedback interferes with the clarity of calls. Mount additional speakers at a distance of at least 31 in from the microphone. When mounting additional speakers, please observe the manufacturers installation instructions. Speakers can be connected to the green (pin 14) and the purple (pin 7) leads of the connection cable. First of all, the purple and green leads must be disconnected from the ISO connector (see Fig. 12). EGO TALK Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Colour Brown Yellow White Purple Red Blue Black Green Function Ground (31) Radio mute View of the plug side, from which the wiring is fed in the plug housing
(with pin allocation) Connection option for additional speakers on pin 7
(purple lead) and pin 14 (green lead) of the 14-pin plug Car audio speaker output +
(front right) Speaker lead +
(front right) Permanent positive (30) Ignition (15) Car audio speaker output -
(front right) Speaker lead -
(front right) 6.6 Connecting the components to the electronics box The individual components are connected to the electronics box as follows:
con guration, one of the following cables is required:
[1] Plug the microphone jack into the jack socket with the microphone symbol
[2] The electronics box line-out must be connected to the car audio line-in. Depending on the car audio line-in
[3] The control console must be connected to the control console input. Connection cable 0.14 in stereo jack to 0.14 in stereo jack (l = 4.92 ft) Connection cable 0.14 in stereo jack to RCA plug (l = 4.92 ft) Connection cable 0.14 in stereo jack to Mini-ISO (l = 4.92 ft) Fig. 12:
Additional external loudspeakers 18 | 19
[4] The 14-pin plug of the ISO connecting cable must be connected with the electronics box.
[5] The base plate for the charging cradle may also be connected to the charger output socket.
[6] The USB port is exclusively reserved for servicing purposes. Fig. 13:
Electronics box connection EGO TALK
[1]
[2]
[3]
[5]
[6]
[4]
6.7 Operational test An operational test is only possible after coupling the system with a Bluetooth- compatible device. The procedure is explained in the sections 7.3 Getting started and 7.5 Audio Player shown in the following pages. 20 | 21 7 User Guide q ROAD SAFETY RISK! Distracted attention can lead to dangerous situations in traf c. Even when using hands-free phone systems, your complete attention must be paid to the current traf c conditions. It is always advisable to avoid phone calls while driving in dif cult traf c situations!
7.1 Features 7.1.1 Overview of features The hands-free EGO TALK system supports the Bluetooth Hands-free Prole. This means that you can operate phones that support this pro le with our system. EGO TALK is the intelligent entry-level solution for in-car telephony and offers the following range of features:
Call functions, such as incoming/outgoing calls and redial Supports mobile voice dialing Music playback playback of music les from mobile phones, iPods or MP3 Players via Automatic radio muting Registration of up to 8 mobile phones Bluetooth Audio-Streaming (A2DP) 7.2 Symbols The control console of the EGO TALK has a total of six keys. The illustration on the right shows an overview of the key locations. The functions of the existing keys are explained in the following section. EGO TALK Key functions The key (green) is for accepting calls. It also controls the redial function; if you have already dialed a number from your phone, press this key to redial. When listening to music, this key controls both the play and pause functions. Functions: accept, redial, play, pause The key (red) is used for rejecting incoming calls and ending completed calls (hang-up). During music playback, this key controls the track stop function. This key is also the switching control between hands-free mode and music control mode. Functions: hang-up, reject, stop, switch between hands-free and music control The key starts the phones voice dialing function. It supports the features shown in the users manual of your mobile phone model. During music playback, the key performs the forward-skip function. Only complete titles can be skipped. Functions: start phone voice dialing function, forward skip The key controls the reverse-skip function. Functions: reverse skip The key increases the volume in phone and music playback modes. Functions: raise volume The key decreases the volume in phone and music playback modes. Functions: lower volume 22 | 23 LED indicators Two different coloured LEDs (red and green) are integrated in the EGO TALK. The LEDs indicate the current status of the system. The following combinations are possible. LED Status Green blinks at intervals no device coupled Both red and green steadily on Hands-free connection enabled (hands-free mode) Green only on A2DP active (music mode) Green steadily on and red momentarily off Music playback stopped (Both pro les enabled, Red steadily on and green blinks periodically active call hands-free mode) 7.3 Getting started Take enough time to familiarize yourself with the use of the system in combination with your phone. First of all, make a few calls to determine the ideal volume and the best voice pick-up direction before using the system in traf c. The best way of optimizing conditions of use is to park your car in a quiet place especially for this purpose. It is also helpful if another phone user can take some time to assist you when making test calls. 7.3.1 About Bluetooth technology Bluetooth technology is a wireless technology and allows, as such, communication between individual devices without the need for cables. Data and voice information can be transmitted simultaneously. It is not unnecessary to have line-of-
sight routing between the devices. The transmission/reception range in the open is typically 32.8 feet. Interference from other electrical or electronic equipment or obstacles may, however, reduce this range. The frequency band in which Bluetooth operates, is reserved virtually worldwide. This coupled with the fact that each Bluetooth product is tested and approved for compatibility with other Bluetooth devices, ensures the highest possible levels of compatibility with devices from a wide range of manufacturers. The EGO TALK supports the Bluetooth Hands-free Pro le. This means that it is fully compatible with all phones supporting the Bluetooth Hands-free Pro le. If uncertain, read the User Guide of your mobile phone to see which pro les are supported. EGO TALK A2DP (Advanced Audio Distribution Pro le) is a technology that enables the wireless transmission of stereo audio signals via Bluetooth to a compatible receiving device. Please take a look at our homepage for information about compatible mobile phones. 7.3.2 On / Off function Turning the ignition key simultaneously activates the hands-free system. Immediately after the system is activated, the two LEDs blink four times. This indicates that the system is in standby mode and ready to make a connection. In order to use the system for phone calls, a Bluetooth compatible phone must be coupled to the EGO TALK system. How this is done is explained in detail in the following sections. When the ignition is turned off, the hands-free system also shuts down. If the ignition is turned off during a call, the phones capabilities are maintained and the system only shuts down when the call has been completed. 7.3.3 Coupling A mobile phone intended for use with the hands-free system must be coupled to the EGO TALK. As long as no devices are connected, the system is visible for all Bluetooth devices. In this state, the green LED blinks every 7.5 seconds to indicate that no devices are connected. The telephone to be used must be registered with the EGO TALK. The Bluetooth search and coupling procedure is initiated from the telephone. Die Bluetooth code is EGO TALK. The default input PIN is 0000. When the connection/coupling procedure is successfully completed, both diodes are steadily on. One phone per user may be coupled. If you wish to couple an additional phone, use your initial phone to decouple the current connection. Should you encounter problems while coupling, please read the section Solving Problems, and take a look in your phone manual at the section about Bluetooth operations. 7.3.4 Automatic coupling If a phone is already connected with the system, the EGO TALK tries to couple to this phone. When a connection has been successfully made, the two LEDs are steadily on. The connection is always made to the most recently coupled phone. If this phone is out of range, the system will search for other phones registered in the system. When the search is successful, the connection to this phone is completed automatically. If the search process was unsuccessful, the system reverts to the coupling mode. This enables manual connection from the phone. 24 | 25 7.4 Calling 7.4.1 Incoming call When an incoming call is received, the ring tone is audible over the EGO TALK. At the same time, the green LED blinks periodically. Pressing key accepts the incoming call. If the call is to be rejected, press the key. When the system registers an incoming call during audio playback, the system automatically switches to hands-free mode. After completion of the call, you can revert to audio playback mode by pressing key to restart the player. 7.4.2 Outgoing call There are various options for initiating a call. Pressing the key starts the phones redial function and dials the last number called. When the connection has been made, the green LED blinks periodically. Pressing the key initiates the phones voice dialing mode. You can now verbally give the number, name or commands supported by your phone. The green LED also blinks periodically in this mode when the call has succesfully been placed. The third option is direct dialling from the mobile handset. q IMPORTANT NOTE: Please observe your countrys regulations on in-car telephone use!
7.5 Audio Player 7.5.1 Coupling Coupling with music players varies from model to model. If you are using a phone that supports both hands-free and A2DP, there is no need to repeat the coupling procedure, because the phone is already coupled to the system. However, when using a player that does not support A2DP (MP3 Player), this must be equipped with a separate A2DP adapter. In the case of such players, there may be no connection between the EGO TALK and your phone when coupling for the first time, otherwise the stand-alone device will be unable to find the EGO TALK unit. In this case, the connection to the phone must be disabled. Once the device has been recognised, a direct connection will be made to your EGO TALK, even when EGO TALK a phone connection already exists. A2DP compatible phone models differ in the method of starting music players. You can find more information on this subject on our homepage. 7.5.2 Play / Pause When an A2DP player is connected and the player has been started, the key starts music playback. Playback can be temporarily stopped by the key (pause function) and resumed by repressing the same key (resume function). 7.5.3 Stop Playback can be stopped when listening to music by pressing the key. The key can also be used to stop music playback and switch to hands-free mode. 7.5.4 Skip function If you wish to skip forward one track, press the key. To skip back one track press the key. 7.6 Volume The volume of audio playback can be controlled by the and keys. Pressing the key raises the volume, pressing the key lowers the volume. 26 | 27 8 Service FAQ List of frequently asked questions:
1. How big are the displays and/or control consoles?
You can nd the dimensions in the Technical speci cations. 2. Are EGO systems suitable for all car models?
Yes, EGO systems are suitable for all cars. See the installation guide!
3. Is there a list of optional charger cradles?
Yes. You can nd a list of the available holders on our homepage. Through an authorized dealers. You canlocate the nearest authorized dealer online, just click on Dealer Dealer Search. 4. Where can I buy EGO systems?
5. How are les exported for music playback?
6. Do EGO systems have an external antenna option?
EGO TALK can play music les over A2DP. But if your MP3 player doesnt have A2DP, you will need an A2DP adapter. You can make your MP3 player or iPod Bluetooth compatible with a dongle/adapter. Your mobile phone can be connected to an external antenna in conjunction with our charging cradle, available as an optional accessory. EGO TALK Troubleshooting:
Problem Ursache Abhilfe Power supply disabled If necessary, replace fuse and check all leads and connections EGO TALK doesnt turn on Ignition not on Turn ignition on Ignitions circuit disabled Check cable and 1 A fuse The party you are calling cannot hear you Microphone not plugged in Connect microphone to electronics box, defective cables require replacement The party you are calling complains about interference Microphone in air stream Mount microphone elsewhere or reduce ventilation Phone too close to EGO TALK components or car radio Increase the distance between your phone and the EGO Talk or radio The party you are calling hears an echo Distance between microphone and speakers too small Increase distance or lower volume Volume too high Lower volume Your phone cannot nd EGO TALK during coupling EGO TALK already connected to another device Disconnect existing connection Sound is unclear, distorted Poor Bluetooth connection Reduce the distance between your phone and the EGO TALK or remove any (metallic) obstructions No connection to coupled phone when ignition turned on Phone is out of range. Make sure your phone is within the range of the EGO TALK. Phone Bluetooth interface is deactivated. Switch phone Bluetooth function to ON
(Option Automatic is not suf cient) Phone requires con rmation of connection set-up. Con rm connection on your phone. Deactivate security function
(see your phone manual) One of the two devices no longer has a valid connection code. Repeat the coupling procedure. 28 | 29 9 Spares parts and accessories You can nd out more about supported mobile phones on our website at www.fwd-online.de. Your dealer will also be happy to advise you if you have any questions. Accessories:
Stereo Mute Box Relax and listen to music or phone from your car. The Stereo Mute Box provides smart sound management. This compact box plays your calls or music over the cars speakers of course in superb stereo sound. The car radio is muted during calls or when listening to music. Features:
- Radio muting during calls or music playback (Audio Streaming)
- Stereo music reproduction in combination with the cars front speakers
- Phone audio over the front speakers Base plate with charging cradle The charging cradle is a practical accessory for Bluetooth hands-free systems by Funkwerk Dabendorf. The charging cradle holds your mobile phone rmly and allows you to recharge its batteries in your car and is an ideal accessory for drivers who are constantly on the road and often need their phones. In addition, the external antenna connection ensures outstanding reception and transmission. Features:
- Intelligent charging circuit for mobile phones
- Mobile phone safely and securely held in the charging cradle
- External antenna connection for excellent call quality EGO TALK Replacement parts:
[1]
[2]
[3]
[4]
[5]
Electronics box Control console Microphone Cable connection set Adapter cable
[1]
[4]
[5]
[2]
[3]
30 | 31 10 Technical speci cations External dimensions: Electronics box External dimensions: Control console Cable length: Control console Operating voltage Quiescent current (ignition off) Fuse: Permanent positive Fuse: Ignition Temperature range 5.1 in x 1.8 in x 0.9 in 1.8 in x 1.3 in x 0.7 in 6.6 ft 11 V to 15 V max. 0,1 mA 2 A 1 A 14 F to 131F Supported Bluetooth Pro les Handsfree, A2DP, AVRCP 11 Certi cation 0681 Fully compliant with the EU R&TTE Directive 1999/5/EC 03 5010 Model certi cation according to EU Directive 72/245/EWG (2006/28/EC) Electromagnetic compatibility in motor vehicles Bluetooth is a registered brand name of Bluetooth SIG, Inc. EGO TALK 12 Conformity statement This equipment employs Bluetooth wireless technology. In some countries, the use of this equipment may be restricted or forbidden. Please make sure you are familiar with such restrictions and do not use your equipment if you are unsure whether its use is permitted in particular countries you may be visiting. Bluetooth is a registered brand name of Bluetooth SIG, Inc. Funkwerk Dabendorf GmbH Mrkische Strae D-15806 Dabendorf Con rms that the hands-free system EGO TALK complies with the fundamental requirements and other relevant regulations of the EU Directive 1999/5/EC. 0681 32 | 33 FCC statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. q NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. q WARNING: Changes or modi cations made to this equipment not expressly approved by FWD may void the FCC authorization to operate this equipment. FCC Radiation Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the speci c operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. EGO TALK 13 Hotline Any questions, comments, or suggestions? Would you like some more detailed information? Do you need an adviser or service in your area? Just give us a call!
Our service hotline is there to help you during the following times:
MondayThursday Friday from 7.00 a.m. to 5.00 p.m. from 7.00 a.m. to 4.00 p.m. Before you call us with your problem, please check rst with the following steps:
Check whether you can solve your problem with the Troubleshooting checklist in Chapter 8. Make sure you have your hands-free system and holder set type available. Try to explain your problem as precisely as possible. You can contact our service hotline by dialing:
From Germany:
Phone:
0800 - 0 393 393 From outside Germany:
Phone:
Fax:
+49 (0) 3377 - 316 233
+49 (0) 3377 - 316 234
+49 (0) 3377 - 316 244 34 | 35 Funkwerk Dabendorf GmbH Mrkische Strae 15806 Dabendorf Germany Phone
+49 (0) 3377 316 - 0
+49 (0) 3377 316 - 300 Fax Email info@fwd-online.de Internet www.fwd-online.de A Funkwerk AG company. Funkwerk Dabendorf reserves the right to modi cations in the course of technological progress and deviations from the delivery scope! All rights reserved! Reproduction, in whole or in part, is only permitted with the prior written consent of Funkwerk Dabendorf GmbH!
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-08-20 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | JBC - Part 15 Class B Computing Device/Personal Computer |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2007-08-20
|
||||
1 2 | Applicant's complete, legal business name |
Molex CVS Dabendorf GmbH
|
||||
1 2 | FCC Registration Number (FRN) |
0009779075
|
||||
1 2 | Physical Address |
Maerkische Strasse 72
|
||||
1 2 |
Zossen, N/A 15806
|
|||||
1 2 |
Germany
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@ets-ps.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
RK7
|
||||
1 2 | Equipment Product Code |
128-01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
I******** B******
|
||||
1 2 | Telephone Number |
+4917********
|
||||
1 2 | Fax Number |
+49-3********
|
||||
1 2 |
i******@molex.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | JBC - Part 15 Class B Computing Device/Personal Computer | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Handsfree Car Kit | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Eurofins Product Service GmbH
|
||||
1 2 | Name |
R****** K********
|
||||
1 2 | Telephone Number |
49-33********
|
||||
1 2 | Fax Number |
49-33********
|
||||
1 2 |
r******@eurofins.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0004000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC