FCC ID: RK7WCH-304 Onboard Vehicle Wireless Power Transfer Device with NFC

RK7WCH-304 Information to the Installer (car manufacturer) FCC This device complies with RF exposure guidelines of the FCC rules and with Industry Canada license-exempt RSS standard(s) under normal use case conditions. FCC ID: RK7WCH-304

RK7WCH-304 Information to the User ENGLISH:

FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: RK7WCH-304 Any changes or modifications not expressly approved by Molex Technologies GmbH could void the user's authority to operate this equipment. The device has been tested for human exposure limits and found compliant at 0 cm for human extremities.

RK7WCH-304 Information to the Installer (car manufacturer) FCC This device complies with RF exposure guidelines of the FCC rules and with Industry Canada license-exempt RSS standard(s) under normal use case conditions. Thus the installation by the car manufacturer must take place at greater than declared minimum distances to human body in order to ensure compliance. Minimum distances are 7.5cm in top direction and 8cm laterally to the edges of the device.

RK7WCH-304 Information to the User ENGLISH:

FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: RK7WCH-304 Any changes or modifications not expressly approved by Molex CVS Dabendorf GmbH could void the user's authority to operate this equipment. The device has been tested for human exposure limits and found compliant at a minimum distance of 3in / 7.5cm in top direction and 3.1in / 8cm laterally to the edges during operation of 15W. Thus a distance of 3in / 7.5cm in top direction and 3.1in / 8cm laterally to the edges must be maintained during operation.

Exhibit 8 Label Location FCC RK7WCH304 IC 4774A-WCH304 Label is attached (lasered) on the bottom side of the product Molex Confidential Information Molex, LLC All Rights Reserved. Unauthorized Reproduction/Distribution is Prohibited. 1(2) Molex Confidential Information Molex, LLC All Rights Reserved. Unauthorized Reproduction/Distribution is Prohibited. 2(2)

molex American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 U.S.A. 31/05/2023 Title: Product Certification Manager On behalf of: Molex Technologies GmbH

(Company Name) Telephone: +49 1735706505 To Whom It May Concern:

We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Ines Baufeld

(Print name)

(Signature ) Molex Technologies GmbH MizarstraRe 3 | 12529 Schinefeld Germany | p: +49 30 166 380 700 | e: tech.office@molex.com VAT/UST-Nr. DE 138 544 145 | Citibank | EUR GB81 CITI 1850 0810 3547 67 | USD GB59 CITI 1850 0810 3547 75 | BIC: CITIGB2LXXX Sitz der Molex Technologies GmbH: Schnefeld | Amtsgericht Cottbus | HRB 16946 CB | Geschaftsfiihrer: Rayko Janicke, Dietmar Herden, Frank Homann, Mehran Aminzadeh Molex Technologies GmbH | MizarstraRe 3 | 12529 Schonefeld

Molex Technologies GmbH | Mizarstrae 3 | 12529 Schnefeld American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 Certification Application Attestation Statements 26/04/2023 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) Molex Technologies GmbH certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) Molex Technologies GmbH (the applicant) certifies that, as of the date of the filing of this application, the applicant - is / - is not identified on the Covered List as an entity producing covered equipment. Thank you, By:

(Signature ) Ines Baufeld

(Print name) Title:

Product Certification Manager Company: Molex Technologies GmbH Telephone: +49 173 5706505 Molex Technologies GmbH Mizarstrae 3 | 12529 Schnefeld | Germany | p: +49 30 166 380 700 | e: tech.office@molex.com VAT/UST-Nr. DE 138 544 145 | Citibank | EUR GB81 CITI 1850 0810 3547 67 |USD GB59 CITI 1850 0810 3547 75 | BIC: CITIGB2LXXX Sitz der Molex Technologies GmbH: Schnefeld | Amtsgericht Cottbus | HRB 16946 CB | Geschftsfhrer: Rayko Jnicke, Dietmar Herden, Frank Homann, Mehran Aminzadeh

Molex Technologies GmbH | Mizarstrae 3 | 12529 Schnefeld Federal Communications Commission Laboratory Division, 7435 Oakland Mills Road, Columbia, MD. 21046 26/04/2023 Class II Permissive Change to FCC ID: RK7WCH-304 To whom it may concern, This is to request a Class II Permissive Change to FCC ID: RK7WCH-304. Following change has been made:

With this change the separation distance of 7.5 cm in top direction and 8 cm laterally can be reduced to 0 cm. The DUT can be installed in the vehicle in different configurations. The worst-case installation location is expected to be the vehicles rear-seat armrest, where it is possible for the passenger to place his arm on the DUT during the operation of charging. With the Numerical Dosimetry Investigation of the DUT a 0 cm separation distance fulfill SAR limits. Sincerely, Ines Baufeld Product Certification Manager Molex Technologies GmbH Mizarstrae 3 | 12529 Schnefeld | Germany | p: +49 30 166 380 700 | e: tech.office@molex.com VAT/UST-Nr. DE 138 544 145 | Citibank | EUR GB81 CITI 1850 0810 3547 67 |USD GB59 CITI 1850 0810 3547 75 | BIC: CITIGB2LXXX Sitz der Molex Technologies GmbH: Schnefeld | Amtsgericht Cottbus | HRB 16946 CB | Geschftsfhrer: Rayko Jnicke, Dietmar Herden, Frank Homann, Mehran Aminzadeh

molex American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Desi nated U.S.A ent Company Name: Molex, LLC Contact Name: Robert J. Zeitler Street Address: 2222 Wellington Court City/Province/Zip: Lisle, IL 60532-1682, USA Telephone No: +1 6305274884 Email: Bob.Zeitler@molex.com FRN #: 0024863532 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)}(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: April 5, 2023 Signed by Robert J. Zeitler, Secreta Molex Technologies GmbH MizarstraRe 3 | 12529 Schnefeld | Germany | p: +49 30 166 380 700 | e: tech.office@molex.com VAT/UST-Nr. DE 138 544 145 | Citibank | EUR GB81 CITI 1850 0810 3547 67 |USD GBS59 CITI 1850 0810 3547 75 | BIC: CITIGB2LXXX Sitz der Molex Technologies GmbH: Schnefeld | Amtsgericht Cottbus | HRB 16946 CB | Geschiftsfithrer: Rayko Janicke, Dietmar Herden, Frank Homann, Mehran Aminzadeh Molex Technologies GmbH | MizarstraBe 3 | 12529 Schnefeld U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) molex The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Molex Technologies GmbH Grantee Code: RK7 Contact Name: Ines Baufeld Street Address: Mizarstrasse 3 City/Province/Zip: 12529 Schonefeld, Germany Telephone No: +49 173 5706505 Email: ines.baufeld@molex.com Applicant Signature:

Date: April 5, 2023 Signed by Ines Baufeld, Product Certification Manager

Molex CVS Dabendorf GmbH | Mrkische Strae 72 | 15806 Zossen Request for Confidentiality Date: 10/06/2022 Subject: Confidentiality Request for: RK7WCH-304 / 4774A-WCH304 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Schematics Test Setup Photos Users Manual Molex CVS Dabendorf GmbH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Molex CVS Dabendorf GmbH Mrkische Strae 72 | 15806 Zossen | Germany | p: +49 3377 316 0 | f: +49 3377 316 300 | e: dabe.info@molex.com VAT/UST-Nr. DE 138 544 145 | Citibank | EUR GB81 CITI 1850 0810 3547 67 |USD GB59 CITI 1850 0810 3547 75 | BIC: CITIGB2LXXX Sitz der Molex CVS Dabendorf GmbH: Zossen | Amtsgericht Potsdam | HRB 213 | Geschftsfhrer: Rayko Jnicke, Dietmar Herden, Bill Fitzer Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Product Certification Manager

(Signature/Title) Ines Baufeld

(Print name) Sincerely, By:

RK7WCH-304 Cover Letter to section 5 b) of KDB 680106 The EUT does comply with clauses (1), (2), (3), (4) and (6) of section 5b) of KDB 680106 v03r01.

(1) Power transfer frequency is less than 1 MHz.

- The device operates at the frequency of 127.55 kHz.

(2) Output power from each primary coil is less than or equal to 15 Watts.

- The device is compliant according to the Qi Wireless Power Transfer System Power Class 0 Specification (BPP and EPP) of the Wireless Power Consortium.

(3) The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time.

- The transfer system includes multiple primary coils and single secondary coil.

(4) Client device is placed directly in contact with the transmitter.

- Client device is inserted in or placed in directly contact with the transmitter.

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

- Followed instruction from previous FCC guidance.

- Measurement started at 10cm. The measurement distance was reduced in 2cm steps until the limit was reached.

- Measurement was also performed at 20cm and 15cm for evidence of fulfilling clause (6).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit.

- The EUT field strength levels at 15cm surrounding the device and 20cm above the top surface is less than 50% of the MPE limit. Refer to EMF test report.