FCC ID: 2AX9S-RCWPA Wireless pad

User Manual Getting Started Charging Your Wireless Pad Charging Your Smartphone with Wireless Pad Charging Wireless Pad Wireless Charger LED Charge Meter Wireless Charger Wireless Charger Wireless Charger Wireless Pad www.rushcharge.com 1.Use Type-C to Type-C charging Cable to charge your Wireless Pad 2.After plug in the Type-C cable the LED will flashing 3S and then off. 3.LED indicate will show red by accident. 1 3 1 2 3 4 2 4 1.Powers any device equipped with wireless charging. 2. wireless charge is show by the LED indicate. wireless charge is show by the LED indicate. wireless charge is show by the LED indicate. wireless charge is show by the LED indicate. 2 3 4 1 2 3 4 3.When charger is in use,LED will show green , After full charge, 4. When the device is not in the correct charging area,the LED flash red. LED will show red. Specification Input Output 40W(max) 4*7.5W/5W/10W Frequency Response 110-205KHZ Charging Distance 2-5mm Dimension 202*202*12mm FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Made in P.R.C. All trademarks are the property of their respective owners.

Page: 1 of 8 Appendix FCC ID Label FCC ID: 2AX9S-RCWPA Wireless pad This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Model: RCWPA Size for the label: 30mm X 20mm FCC ID: 2AX9S-RCWPA TB-RF-074-1.0 Page: 2 of 8 Appendix ID Label Location ID LOCATION FCC ID: 2AX9S-RCWPA TB-RF-075-1.0

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2020/12/18>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AX9S-RCWPA Model name RCWPA For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Cleopatra Georgiades/Manager Company:

Address:

Phone:

Fax:

E-Mail:

Molonlave Group LLC 36-20 34th Street, Long Island City, NY 11106, USA 201 560 7647 N/A Cleopatra@rushcharge.com

Molonlave Group LLC 36-20 34th Street, Long Island City, NY 11106, USA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2020/12/18 We, Molonlave Group LLC the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID:

2AX9S-RCWPA including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Cleopatra Georgiades/Manager Molonlave Group LLC 36-20 34th Street, Long Island City, NY 11106, USA 201 560 7647 N/A Cleopatra@rushcharge.com

Molonlave Group LLC Date: 12/18/2020 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AX9S-RCWPA To Whom It May Concern:

This letter is to ascertain that Molonlave Group LLC Product Wireless pad Model:RCWPA , has been the units used for conducting FCC compliance testing, and it meets KDB 680106 Clause 5(2) all 6 conditions as stated below hence PBA is not required. 1 Power transfer frequency is less than 1 MHz. Yes, Operation Frequency is 110KHz-205KHz. 2 Output power from each primary coil is less than or equal to 15 watts. max output power less than 40W. 3 The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. No. The transfer system includes four same charging circuit part and each part include one pair of primary and secondary coils. 4 Client device is placed directly in contact with the transmitter Yes. 5 Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).. Yes 6 The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes. If you have any question or concerns, pls. contact us. Sincerely,

<Signature of Cleopatra Georgiades >

Cleopatra Georgiades Name Company: Molonlave Group LLC Address:

Phone:

Fax:

E-Mail:

36-20 34th Street, Long Island City, NY 11106, USA 201 560 7647 N/A Cleopatra@rushcharge.com