ITFIT BE7 manual_aw Size: 70.5mm(w) x 90mm(h) WIRELESS SPORTS EARPHONES Power button O Volume button
+ / -
Instruction Manual Removable ear tip Action Press and hold O for about 2 seconds Press and hold O for about 4 seconds Press and hold O for about 5 seconds Press and hold O for about 2 seconds LED Indicator Blue LED flashes for 1 second Red LED flashes for 1 second Blue & Red LED flashes alternately Blue LED flashes quickly & reconnects automatically Instruction for use Function Turn the earphone ON Turn the earphone OFF Bluetooth connection
(First time to pair with mobile device) Bluetooth connection
(Reconnected to mobile device after paired) Play or pause Music Volume up Volume down Skip forward Skip backward Pick up a call Reject the call Terminate the call Switch device during the call*
Press and hold O for about 1 second Short pressing +
Short pressing Long pressing +
Long pressing Press O Press and hold O for about 1 second during the call When an incoming call Press O Press and hold O for about 1 second during the call Short press O Switch caller in a call
(Terminate current call)*
Switch caller in a call
(Pause & Hold current call)*
Switch caller in a call
(Switch back the on-hold call)*
Keep current caller & Reject a new coming call*
* Depending on whether the mobile device supports this feature Press O twice Press O twice Press and hold O for about 1 second Blue LED flashes once every 5 seconds Disposal of Electronic Products 1. Do not place the product as household waste;
2. Please dispose of discarded electronic products properly Micro USB cable according to local regulations. 3. Please participate in electronics recycling program. Bluetooth Pairing Quick Start Guide 1.Press and hold the O button for about 5 seconds to power on and put the earphone into paring mode. 2.The LED indicator will flash red and blue alternately. 3.Open the Bluetooth settings on your mobile device and search for nearby Bluetooth devices. 4.Locate and select BE7 entry from the list. When pairing is successful, the LED will flash blue every 5 seconds. (Note that if the earphone will remember the last device it was paired with and will automatically reconnect whenever it is in range.) Press & hold for about 5 secs. How to charge 1. Open the charger port cover. 2. Connect the headset to USB power adaptor via Micro USB cable. 3. The LED indicator will glow RED when charging. 4. The LED indicator will glow BLUE when the battery is full. 5. When the battery is low Standby mode:
The LED indicator will flash RED once every second. Working mode:
The LED indicator will flash RED every 5 seconds. 2019 AUG 01 Wireless Earphone Model : BE7
: 5.0
: 10m
: 8Hz~20kHz
: 32 Ohm
: 90mAh Specification:
Bluetooth Version Effective Range Frequency response Impedance Battery Non-stop working time : Up to 6 hours Charging time Energy Saving mode Dimensions
: Approx. 2 hours
: Auto power off
: 49 x 47mm earbud, 500mm cord length
: 19g Weight Contains:
1. 1 x Wireless Earphone 2. Removable ear tips (3 pairs):
Small / Middle (installed on Earphone) / Large 3. 1 x Micro USB charging cable 4. Instruction Manual Copyright @ 2019 ITFIT All rights reserved FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requir ement. The device can be used in portable exposure condition without restriction FCC ID: 2ANBQ-BE7