(Model:FM2000M) 1/13 Contents 1. Direction before Use 1.1. Direction for safety usage 1.2. Product packing and contents 1.3. Parts name and function 1.4. Fingerprint identification process 2. Product Specifications and Function 2.1. Specification 2.2. Function Buttons 2.3. Voice Work 3. Manager Registeration and Change 3.1. Master Fingerprint Regiateration 3.2. Master Card Registeration 3.3. Chaing Master Fingerprint 3.4. Chaing Master Card 4. User Management 4.1. User Registeration 4.2. User Deletion 4.3. All User Deletion 5. Entrance/Exit Setup 5.1. Access Mode 5.2. Set how to recognize 6. Product initialization and Reset 6.1. Product initialization 6.2. Product resetting 7. Product installation 8. Others 8.1. Checking matters before request for A/S 8.2. Terminology explanation 2/13 1 1. Direc 1
.1 Directi Do no
: In cas be b case Do no
: The s Do no
: This if yo or o tion bef fore Usi ing on for saf t move or se of arbi broken dow e, call the t place th system ma t open/clo system is ou arbitrari perator if e fety usage reinstall t the system ving or ins trarily mov wn due to o an elec operator. e equipme ay receive ose or rep a high-p ily open/c needed. ent around e electrica pair the sys recision e close or re m arbitrarily stalling the ctrical sho y. e system, ock or ina the syste adequate em may no connectio ot work or r on. In this s h voltage f voltage. flows. d places w l effect du stem arbit electronic pair it. Ma where high ue to high trarily. product. S ake sure to So, it can o call the be damag sales com ged mpany 1
.2 Produc ct packing g and cont tents a. fm2000 0 Fingerprin nt Control U Unit b. RF Card d(13.56MH Hz) c. Accesar ries(Conne ector, Screw w and etc) d. CD(hard dware/softw ware manu ual, pc prog gram) 1ea 2ea 1ea 1ea
* Select O rder : AC P Power Adap ptor(DC12V V, 2.5~3A) 1
.3 Parts n name and Function Fi
(fi ingerprint ingerprint window recognitio n window) C ontact poin contact wit
(c nt of RF ca thin 4cm) ard L ED(green, red) F 1, F2 funct Registration
(R n tion button n,Commute e managem ment) S peaker
(B Beep, Voic ce prompts
) R Reset butto n 3/13 1.4 Fingerprint identification process picture1 picture2 Finger should be kept clean, so that a correct recognition is possible. If the finger is wet, recognition may be impossible. Make sure that there is no alien substance on the fingerprint recognizer. Place the finger correctly at the center of the fingerprint recognizer as shown in <Picture 1>. All fingerprint should be touching the fingerprint recognizer as shown in <Picture 2>. 2. Product Specifications and Function 2.1 Specification Event Log CPU RAM Communication User Registration FLASH(Program & Data) ARM9 400MHz 32MByte 64MByte 4Fingerprint + 1Card : 5,000Users Card : 50,000 Users Total 55,000 Users 200,000 Events RS422, Ethernet, Wiegand 4 Signal Inputs, 1 Relay Output 13.56MHz Mifare Speaker Access Control and Time Attendance
-20 ~ 50C / Lower than 90%
RH(Non-Condensing) DC 12 3 V 300 mA Optical Sensor 800 ms 1: 1,000 Identification Time < 1sec System Software Operating Environment 1:1 Verification Time Power Consumption Card Reader Sensor Type In/Out Audio Template Size MAX 490Bytes 2.2 Function button and explanation on LED
** This product is designed to work using function buttons and LEDs alone without numeral buttons. For convenient use, read carefully how to work function buttons and LEDs) 4/13 2,2,1 Function button Press F1 2 times and F2 once Press each F1 and F2 2 times Function to have master card registered and Changed. Function to have master finger print registered and Changed Press F2 2 times and F1 once. Press F1+F2+F1 User registration and deletion (F1:ongoing F2:completed) Setting mode of how to access(incoming/outgoing)
(F1:Menu change, F2:setting completed and closed) Setting how to recognize Back to original position(initial state) or Cancellation Press F2+F1+F2 Press F1 & F2 at the same time Press F1+fingerprint (or card) After a voice Attendance is heard, save the time to work After a voice Go out is heard, save the time to go out in the office. After a voice Return to the office is heard, save the time to get back to the office After a voice Leave Office is heard, save time to go home After a voice Door opened is heard, Fingerprint (card) ID is stored with green LED on F1 & F2 turned on. A sound Beep is heard once with red LED on F1 &
F2 turned On. Whenever F1 or F2 is pressed, a voice beep is heard once. A voice Set back is heard and back to an original position Red LED on F1 & F2 F1 + F2 + fingerprint (or card) F2 + F1 + fingerprint (or card) F2 + fingerprint (or card) Recognition of registered finger print (or card) Unregistered finger print
(card) is authenticated or Unauthenticated Press F1 or F2 key Setting wrong function The product is in an Abnormal condition 2.2.2 LED explanation Alternately flashing F1 & F2 Green light on F1 Indicates normal standby conditon Indicates Menu change, or Go ahead when F1 is Green light on F2 Green light on F1 and F2 at The same time Red light on F1 and F2 at The same time pressed Function setting completed and finished when F2 is pressed. Indicates normal working condition Indicates abnormal working condition 2.3 Operating prompts by voice
(Korean speech) English voice() Please contact security manager Reset please Closed mode 5/13
. Registered Registration completed Register master fingerprint Register master card Change master fingerprint Change master card Changed Return to office User registration!
User deletion!
All users deleted Delete?
Deleted Deletion completed Open mode Go out Authenticated Please set how to recognize General mode Access via fingerprint or card Regiser fingerprint Access via fingerprint Access via fingerprint and card Attendance Set access mode Door opened Initialized Register card Access via card Leave office 3.Administrator registration and change
** After opening the product package and applying electrical power on the terminal for the first time, register administrators master fingerprint and card. Administrator is required to have 4 fingerprints and 1 card registered at the same time. If either only fingerprint or card is registered, an outsider may register for unauthorized use, Thus causing very dangerous situation. 3.1 Master fingerprint registeration Press F1 button twice and F2 button once A voice Register Master fingerprint! Master fingerprint registeration A voice Registered 2nd fingerprint registeration A voice Registered(4 registerations) A voice Registeration completed Normal standby state(Green LEDs on F1 and F2 button flicker alternately) 6/13
** If one made mistake in operation or wants to start again while registeration(master or user) is under way, press F1 & F2 button at the same time, thus putting the terminal in normal standby state(Green LEDs on button and F2 button flicker alternately)
** When registering finerprint(Maste, User), have 1~2 digits registered for 4 finerprints, Therby reducing error in fingerprint registeration. 3.2 Master card registeration Press F1 twice +
F2 once A voice Register master fingerprint Card registeration A voice Registered(1 card registered) A voice Registeration completed 3.3 Master fingerprint change Press F1 twice + F2 once A voice Register master fingerprint Registered Master Fingerprint(card) authenticated A voiceAuthenticated, Register change in Master fingerprint Registration of change in Master fingerprint A voiceRegistered Registration of 2nd change in Master fingerprint A voice Registered(4 fingerprints registered) A voice Registration completed 3.4 Mastercard Change Press F1 twice +
F2 twice A voice Register Mastercard Registered Mastercard
(fingerprint) authenticated Authenticatedand a voice Register change in Mastercard Change in Mastercard registered A voice Registeredand Registration completed. 4. User(finger print or card) registration and deletion
** A total of 55,000 users can have fingerprints or cards registered : the first 5,000 users can have both 4 fingerprints and 1 card registered while remaining 50,000 users can have only cards registered. 4.1 User registration 4.1.1.User registration(4 fingerprints & 1 card ) Press F2 twice +
F1 once A voice User registration! Touch master fingerprint(card) on Terminal A voice Register fingerprint User fingerprint registered A voice Registered User fingerprint (2nd) registration A voice registered(4 fingerprints registered) A voice Register card Card registered A voice Registered F2 A voice User registration completed
** When one has only fingerprint registered, press F2 button without card registeration and one wants to register card alone, after a voice Register fingerprintis heard, press F1 button to hear a voice Register card
** Each user is given one ID of his own which includes 4 fingerprints and 1 card registered.
** A total of 55,000 users can have fingerprints or cards registered : the first 7/13 5,000 users can have both both fingerprints and card, and remaining 50,000 can have only card registered. 4.1.2. User registeration(4 fingerprint only) Press F2 twice
+ F1 once A voice User registration Master fingerprint(or card) A Voices AuthenticatedRegister fingerprint User A has his Fingerprint registered A voice Registered User As fingerprint(2nd) registered A voice Registered(4 fingerprints registered) A voice Register card Press F2 A voice Registration completed
## A voice Registered(4 fingerprints registered) A Register card is heard, press F1, then registration of 2nd user Bs fingerprint is under way A voice Registered User Bs fingerprint(2nd) registered A voice Registered(4 fingerprints registered) A voice Register Cardis heard, press again F1 to go ahead with 3rd users registration and if F2 is pressed, users registration is completed.
** When one wants to have fingerprint alone registered, after 4 fingerprints are registered and a voice Register cardis heard, without having card recognized, press F1 key to go ahead with registration of 2nd users fingerprint. Whenever F1 key is pressed, other users registrations continue and then, press F2 to complete registration. 4.1.3. User registration(one card only) Press F2 twice +
F1 once A voice User registration! Master fingerprint(or card) A voices AuthenticatedRegister fingerprint Press F1 A voice Register card A card registered A voice Registered Press F2 A voice Registration completed
## After A card is registered and a voice Registeredis heard, press F1 key to go ahead with registration of 2nd user and a voice Register fingerprint F1 A voice Register card B card registered A voice Registeredis heard and user registrations continue and press F2 to complete registration. 4.2 User deletion Press F2 twice +
F1 once A voice User deletion! master fingerprint(card) authenticated A voice Authenticated registered user fingerprint(or card) A voice Deleted Press F2 A voice deletion completed
## (When repeting deletion) After a voice Deleted is heard, Continue registered card(fingerprint) wanting to be deleted and when a voice Deleted is heard, it is deleted and when deletion is completed, press F2.
** When a particular user deletes one of his fingerprints(or 1 card), all of his fingerprints(4) and card registered are deleted. 8/13 4.3 Deletion of all users Press F2 twice +
F1 twice A voice User deletion! Master fingerprint(or card) A Voice Authenticated F1 A voices All users deleted, Delete? F1 A voice Deletion completed
** If all fingerprints(or card) of users are deleted, master fingerprint(card) remains and be careful that once they are deleted, they cannot be reinstated. 5. Setting how to access 5.1 Access mode setting General mode
(registered users access) Open mode
(Access door remaining open) Press F1+F2+F1 A voice Set access mode Master fingerprint(or card) A voice Authenticated F1 A voice General mode F2 A voice Registeration completed, and into normal stanby (greenLED on F1 and F2 flicker alternately) Press F1+F2+F1 A voice Set access mode Master fingerprint(or card) A voice Authenticated F1 A voice General mode F1 A voice Open mode F2 A voice Registeration completed Closed mode
(no access allowed except for adminis
-trator)
## At open mode, green LEDs on F1 and F2 flicker alternately, finerprint light is extished and fingerprint/card except function key are not recognized.. Press F1+F2+F1 A voice Set access mode Master fingerprint(or card) A voice Authenticated F1 A voice General mode F1 A voice Open mode F1 A voice Closed mode F2 A voice Registeration completed
## At closed mode, green LEDs on F1 and F2 flicker alternately, finerprint light is extished and fingerprint/card except function key are not recognized
** When the product left factory, access mode was set at general mode. 5.2 Set how to recognize Access via finerprint of card Access via fingerprint only Press F2+F1+F2 A voice Please set how to recognize Master fingerprint(or card) A voice Authenticated F1 Access via card F1 A voice Access via fingerprint F1 A voice Access via fingerprint and card F1 A voice Access via fingerprint or card F2 A voice Registration completed and into normal standby state(Green LEDs on F1 and F2 flicker alternately) Press F2+F1+F2 A voice Please set how to recognize Master fingerprint(or card) A voice Authenticated F1 Access via card F1 A voice Access via fingerprint F2 A voice Registration completed and into normal standby state(Green LEDs on F1 and F2 flicker alternately) and registered card is not recognized. 9/13 Access via card only Dual recognition via card and fingerprint Press F2+F1+F2 A voice Please set how to recognize Master fingerprint(or card) A voice Authenticated F1 Access via card F2 A voice Registration completed and into normal standby state(Green LEDs on F1 and F2 flicker alternately) and fingerprint light is extinguished. Press F2+F1+F2 A voice Please set how to recognize Master fingerprint(or card) A voice Authenticated F1 Access via card F1 A voice Access via fingerprint F1 A voice Access via fingerprint and card F2 A voice Registration completed and into normal standby state
(Green LEDs on F1 and F2 flicker alternately)
## For access via card and finerprint, have card first recognized and then, have fingerprint recognized.
** When the product left the factory, access mode is set via fingerprint or card. 6. Product initialization and Reset 6.1. Product initialization(Factory mode) When it is necessary to delete registered master fingerprint(card) and all of user registrations to operation problem or reinstallation and the terminal is handled as if it is for the first time, have the product initialized. How to initialize : With DIP Ni. 8 switch at OFF and power switched ON, a voice Initializedis heard repeatedly and when FIP No. 8 whitch is put at ON, the terminal will be in a normal standby state. After the terminal is initialized, be sure that DIP Switch is always to be put at ON position. Registration and status of events stored at fingerprint terminal are deleted by Product initialization. Be careful. 6.2. Product resetting(reactivation) If something goes wrong with the product while in operation, press reset switch to Restore it back to normal. Registrations and events stored remain undeleted. 7. Product installation 10/13 7.1. Connection to CN1 Ethernet connect Ethernet line to CN1 7.2. J2 Connection to J2 power and I/O 18 16 14 12 10 8 6 4 2 17 15 13 11 9 7 5 3 1
- Power connection : Connect +12V, 0V to No.2pin and No.4 pin irrespective of their respective Polarity.
- Connection to Wiegand : Connect No.6 pin to Wiegand D0 and connect No.8 pin to Wiegand D1.
- RS422 connection : TX+(No.12pin), TX-(No.14pin). Rx+(No.16pin), RX-
(No.18pin)
- Connection to Relay output : Normal Open(No.1pin), Common(No.3pin), Normal Close(No.5pin)
- Connection to Sensor : Sensor 0(No.9pin, Exit), sensor1(No.11pin, Door Status), sensor2(No. 13pin), Sensor4(No.15pin)
- Signal ground : No.7pin, No.10pin, No.17pin 11/13 7.3. If SW1No. 1 ~ 5were set at OFF when leaving factory, local address is No.1 Address No.1 No.2 No.3 No.4 No.5 FM2000 local Address setting
- Use SW1No. 1 ~ 5to set Llocal Address
- To set address, set SW1 pin No. 1 ~ 5 as shown in below table.. Address No.1 No.2 No.3 No.4 No.5 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON 7.4. Enable to output Wiegand
- Set pin No.6 of SW11 at ON, enabling the terminal to output Wiegand.
- Where user card is registered, if user is authenticated irrespective of access mode, registered card ID is out put.
- Where fingerprint alone is registered, if user is authenticated, user ID is output. Where fingerprint is registered in FM2000 terminal. user ID is automatically set sequentially starting with 1. 7.5. Selecting type of signal input as required
- SW1 No.7 pin is set at OFF when leaving the factory. Signal is input by normal open.
- Where signal is input by normal close, change SW1 No.7 pin to ON position. 12/13 8. Others 8.1. Checking matters before request for A/S Input does not act well or response speed is slow
- Check whether there is moisture in finger
- Check whether Alien substance is on the surface of fingerprint reader
- Check whether fingerprint was input exactly Fingerprint registration does not act
- Confirm fingerprint registration availability
- Confirm fingerprint registration method
- Confirm state of fingerprint reader 8.2. Terminology explanation LAN (Local Area Network) :
LAN is linked with communication line fewer than 300m, and it means linkage of PC, main frame, workstation. LAN is distance that electric current or radio signal can be passed correctly between computer and LAN is linked high speed communication network established in building of a certain organization so that employees can use computer equipments most effectively IP address :
It is Internet Protocol Address of 32 bits that provided as the concept agreeing with physical network address, on the Internet, to make Routing efficiently Gateway(GW) :
It is a network point that act as entrance which enter other network Subnet Mask(SM) :
Subnet is abbreviated word of "sub-network", it is network that is belonged to certain organization but it means network that can be realized to a part detached apart 13/13 14/13 15/13