Users Manual MONIT Smart Baby Monitor Product Function MONIT Diaper Sensor Function Sensing urine and feces Function Interior Temperature Check MONIT Air Quality Monitor Hub Notication Clean / Urine / Feces Farts / Abnormality Notication
/
Good / Average / Bad / Very Bad
(Activates as soon as the MONIT Diaper Sensor is inserted) Action Notication sent to the App connected via Bluetooth Action Wireless network /
Notication sent to the App connected via Bluetooth www.goodmonit.com Interior Humidity Check VOC Gas Check Thank you for purchasing MONIT. Fully read the users manual before you start using MONIT and follow its instructions. Product Components MONIT Diaper Sensor / MONIT Air Quality Monitor Hub /
Diaper Cradle / Micro USB Cable / Charger / Users Manual MONIT Diaper Sensor MONIT Air Quality Monitor Hub Diaper Cradle Charger Users Manual Micro USB Cable Product Parts Brightness:
Minimal / Medium / Maximum Nursing Lamp Getting Started 1. Fully charge your battery before using the MONIT Sensor for the rst time. 2. Search for MONIT on Google Play Store or iOS App Store and download the application. MONIT MONIT 3. Register and Log-in after turning on the MONIT App. 4. Install the MONIT Sensor and the Air Quality Monitor Hub using the following instructions. Settings Please make sure your Internet connection is good before starting the initial setup process. MONIT Diaper Sensor 1. Check the Bluetooth status on your Smart Phone. 2. Press Register Device on the main screen, and select MONIT Sensor 4. Press Start Connection button on the app. Then the Sensor will initiate the connection. 5. Register your babys information. The accuracy of the sensor may depend on the information you provide. 6. Once you nish registering your babys information, the Sensor registration is complete. Then press the Done button in the upper right corner and your Sensor will be ready for use. MONIT Air Quality Monitor Hub 1. You must connect the Sensor prior to connecting the Hub. Follow the instructions above to connect the Sensor. 2. Follow the same steps as the Sensor. Press Register Device and select Hub 3. Connect the Hub to its power source and check if the blue LED light is blinking. Connect to power 4. Insert the connected Sensor to the Port of the Sensor on the top of the Hub. The Hub connects through the Sensor when you press Start Connection button. keep the yellow LED lit for three seconds 7. You will see the registration complete page when the Hub is connected to the network. Press the Done button on the upper right side and your Hub will be ready for use. Upon the completion of registration, the LED light on the top of the Hub will show a color to display the air quality. Q: What do the colors of the LED light signify?
A: Blinking blue: connection in progress Yellow: conrmed connection between the Senor and the Hub Blue: good air quality Green: average air quality Users Guide In case of an app force stop, you may not receive push notications. This device is not waterproof. When wet, it may cause device failure. (Do not use it on cloth diapers.) 1. How to charge the MONIT Sensor Option : Insert your Sensor in the Port for the Sensor on the top of the Hub. Once it is inserted, the Sensor will automatically charge. Option : Plug the cable from the USB Charger Terminal into the Sensor. 2. This is the screen shown on your app when all devices are connected. Device Registration Account Device Name (Sensor) Sensor Details Hub Details Action Status Battery Diaper power Device Name (Hub) My Group
(Sharing/Shared) Mark 5. Once the Sensor is connected to the Hub, the yellow LED light on the top of the Hub will be on for three seconds. 6. Search and select the proper wireless network to connect the Hub to the server. If the network is password protected enter the password to connect the Hub to the network. ScoreTemperatureHumidity Gas Connection Status The Sensor is connected directly to the smartphone via Bluetooth. Connection may be cut o when the distance between the Sensor and the smartphone increases. Power Switch Sensing Hole Status LED USB Charger Terminal Touch Button Sensing Hole Port for Sensor Status LED Nursing Lamp Lighting Area USB Charger Terminal 3. Turn on the power switch on the side of the Sensor, and make sure the blue LED light on the front is blinking. The Sensor is connected to the Hub via Bluetooth. The device status is transmitted from the Hub to the smartphone over a wireless network. Connection will remain even when the distance between the Sensor and the smartphone increases as the Sensor will automatically connect with the Hub.
- Clean 3. Checking the information on the MONIT Diaper Sensor Device Setting Diaper Status Reset Button Diaper Status
- Urine Sensed Change Complete Button Diaper Status Notication message
- Abnormality Sensed
- Feces Sensed
- Fart Sensed Action Action guide message Change Complete Button Press the Done button after changing the diaper. It will increase the accuracy of your next sensing. Sensor Action Status
- Sensing : Sensing urine and feces status
- Charging : Connected to either Hub or charging cable. Charging is in process. Number of Notications It displays how many notications are made for the day. Abnormality Status Sensor has been exposed to an abnormal environment. Check the diaper and re-start the Sensor. Diaper Status Reset Button The diaper status may be reset to the Clean screen. 4. Checking the information on the MONIT Air Quality Monitor Hub Device Setting Air Quality Status Notication message VOC Gas VOC gas can be monitored once the Sensor is connected to the Hub. If the Sensor is not attached to the Hub, it monitors only the temperature and humidity. Q: VOC Gas A : VOC gases are the Volatile Organic Compounds found in the air. These are released by toys and the nishing materials of interior walls. Over exposure to VOC can cause skin diseases and respiratory problems. 5. Adhere the Sensor to the Diaper The Diaper Sensor must be inserted into the Diaper Cradle so that it can adhere to the diaper. Make sure the MONIT logo on the sensor faces inside the diaper cradle. Swivel the sensor slightly from side to side to attach it more strongly. When the Velcros hooks are rmly interlocked with the diaper, the sensor will be more rmly connected.
(The Diaper Cradle is compatible with most of disposable diapers.) 6. Using the Hub as Nursing Lamp The MONIT Logo located at the top of the Hub is a touch button.
- Brightness Control (3 levels) : Short touch on the MONIT logo. Nursing Lamp Touch Button Nursing Lamp Lighting Area 6. Setting optimal temperature and humidity The MONIT Air Quality Monitoring Hub will send you an alert when the temperature and humidity are not within set parameters. http://support.goodmonit.com 8. Other guidance If you need further information regarding the registration and use of our product, please visit our website or scan the QR code on the bottom. Creating a Group (with sharing feature) Set the Device Name Change the Hub network Set the device push notications Update the device rmware Set LED on/o time of the Hub Product Warranty Period and Policy 1-year warranty Warranty service is available if the product is found defective within the product warranty period. Please attach the proof of purchase (to check the purchase date) Devices with deciencies due to users improper handling, including but not limited to fall, submergence, and disassembly of the product, will not be eligible for replacement. Opened boxes without a legitimate reason cannot be refunded. Do not attempt to disassemble or repair the product. Altered products will not be eligible for warranty services. DC 5V 150mA (Micro USB) Bluetooth 5.0 Li - Poly DC 3.7V 170mAh 3hours
-10 ~ 50 Android 5.0 & iOS 9.0 or above D40.6 x 10.3 (mm) 12 g 0 to 3 years Size and Specication MONIT Diaper Sensor Power Supply Communication Battery Charging Time Operating Temperature Support Platform Size Weight Recommended age of use MONIT Air Quality Monitoring Hub Power Supply Communication Power Operating Temperature Color Temperature Support Platform Size Weight Recommended age of use Safety Precautions The following information is for your safety and the safety of those around you. To prevent any property loss, make sure to fully read and follow the following instructions. DC 5V 1500mA (Micro USB) Bluetooth 4.2 Wireless network: 802.11b/g/n 7.5 W
-10 ~ 50 3000K Android 5.0 & iOS 9.0 or above D93 x 100.4 (mm) 181 g 0 to 3 years Warning Do not attempt to disassemble or repair the product. Altered products will not be eligible for warranty services. Keep the product away from humidity and dust. Prevent falls, water immersion and shock. It can cause damage to the electrical board. Do not place or use the product in direct sunlight or high temperatures. It can cause exterior deformation and malfunction. In case of water contact be careful of electric shock. Immediately remove the product from its power supply. This product is for indoor use and is not water and/or humidity proof. Do not use a high-speed charger. It may cause abnormal operation and/or burden on the product. Do not let infants or pets chew or lick the product. Keep cables away from infants reach. Children have STRANGLED in cords. Check the appropriate operating temperature of the product (located in the size and specication section). Higher or lower temperatures can cause breakdowns or battery life problems. This device is recommended for infants aged 0 to 3. To use it for toddlers 3 years or older, caution is required, such as impact and disassembly. Risk of Fire, Explosion and burns. Do not expose the product to shock or damage. Use only the specied charger to recharge the product. Do not let conductive materials near the charger terminal. About the AC adapter Use only the MONIT AC adapter. Using unapproved adapters may cause overheating, resulting in re and electric shock. Do not dissemble, alter or touch the AC with wet hands. This can result in electric shock, malfunction and/or re. Do not pull or place heavy items on top of the AC adapter cable. This can result in electric shock and/or re. Use only the specied power voltage on the AC adapter. Doing otherwise may result in electric shock and/or re. Made in Korea Product Certications Product Name : Monit Diaper Sensor, Monit Air quality monitor Hub FCC ID : (Sensor) 2AQNN-SBM-S100U
(Hub) 2AQNN-SBM-H100U Model : SBM-S100U , SBM-H100U ManufacturerCountry of Origin : MONIT Corp.Republic of Korea This device cannot be used in human safety related services due to its risk of interference This product complies with household use (rated B) level electromagnetic wave limits and it may be used in all regions. MFD BY MONIT. Corp Model SBM - S100U Input 5V / 150mA FCC ID 2AQNN-SBM-S100U Address 5, Nambusunhwan-ro 289-gil, Seocho-gu, Seoul, Korea FCC Warning Statement FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modications (including the antennas) to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body. Declaration of Conformity MONIT Corp. declares that this device complies with the essential requirements and relevant provisions of Directive 2014/53/EU Go to support.goodmonit.com to view the Declaration of Conformity Before Requesting Customer Service Before requesting customer service, read the following trouble shooting procedures. It does not turn on. The product will not turn on when the battery is not charged. Make sure to fully charge your battery before use. It stops in the middle of use. If the product stops or slows down during use, restart the device. If the condition continues attempt to reconnect the devices. The alarm does not go o. If you are an iOS user, check to see if notications for the MONIT App have been allowed. Settings > Notication > Select MONIT App > Allow Notications I cant nd the device on the Bluetooth connection list. Make sure your product is on Bluetooth standby status. Search for devices after the product has been reset. Make sure the product and the device are within 10 meters of each other. The Battery Life is shorter than before. Exposure to high and low temperature can cause battery life shortening. Batteries are consumables; therefore, their life shortens with use. The content of this users manual can vary depending on the software versions. The design, specications and service, etc. of the product are subject to change without prior notice to improve performance. The provided product components and available items sold separately are subject to change due to MONITs circumstances. A / S Inquiry support@goodmonit.com Registered Trademark Rights Android is a trademark of Google Inc. iOS is a trademark of Apple Inc. and is registered in all countries including USA. Bluetooth watermark and logo are property of Bluetooth SIG, Inc. MONIT Corp. is using these under authorization of the same company.