Contents Contents Introduction The ASB-10 ASB-10 Capabilities Whats in the box ASB-10 Connections ASB-10 Buttons Remote 1 2 2 2 3 3 3 4 4 5 Connecting Audio Devices Via Digital Input Connecting Analogue Audio Devices Via Coaxial 5 Input 6 6 7 8 LED Colour Matrix LED Flashing Patterns Specifications Owner Information Changing the Remote Battery 1 Introduction ASB-10 Capabilities Fully active, high performance soundbar system 5 discrete power amplifier stages - fully digital amp technology (class D) Proprietary 3D spatial effects, consistent in quality irrespective of environment Digital coaxial input (S/PDIF) Digital optical input (Toslink) Analogue stereo RCA inputs, 3.5mm Jack (auto-sensing between each input, via analogue switch) RCA LFE sub-woofer output (adjustable crossover settings) USB port for service, FW update and Airplay network set up On-screen set up (OSD) for all advanced audio features access Silicon rubber stand included for secure cabinet top placement Designed to fit Sanus TV mounting systems Optional sturdy Monitor Audio wall bracket with cable hole access and template installation Stream audio from your iOS-device to multiple Airstream devices using our Airstream App. Available in the App Store from 2013. Stream audio by Wi-Fi from any PC or Mac using iTunes (version 10 or later) connected to the same wireless network as the ASB-10. Whats in the box ASB-10 Remote Control Mains lead (region specific). Quick Start Guide Safety Instructions 2 The ASB-10 ASB-10 Connections Title: ASB-1 CONNECTOR PANEL DECAL ARTWORK V1 Date: 1st July 2014 1. Auxiliary Used to connect an analogue stereo audio source to the ASB-10 using a 3.5mm stereo mini jack connector (refer to page 8). 2. Mains Input Used to connect the ASB-10 to the mains (refer to page 9). 3. Sub Out Used to connect the ASB-10 to an additional sub woofer (refer to page 8). 4. Digital Coaxial Input Used to connect digital coaxial audio source to the ASB-10 (refer to page 7). 5. USB Input Used for firmware updates (refer to page ___) 6. Digital Optical Input Used to connect digital optical audio source to the ASB-10 (refer to page 7). 1 2 SUB OUT COAXIAL U S B 3 4 5 6 AC INPUT OPTICAL ASB-10 Buttons 1 2 3 4 5 6 Notes:
1. CONNECTORS TEXT TO BE SILK SCREENED COLOUR PANTONE COOL GRAY 3M. 2. BACKGROUND TO BE PANTONE BLACK 7M. 3. IMAGE FOR REFERENCE PURPOSES ONLY. 4. VERSION 1. 1. Standby Used to put the ASB-10 in and out of stand by mode. Holding it down for 5 seconds it searches for an internet firmware update or a USB update. 2. Input Source Toggle Used to toggle through the Auxiliary and Digital Inputs. 3. Bluetooth Used to select the Bluetooth input and pair devices to the ASB-10. 4. 3D Sound Used to change the sound of the ASB-10 to create a 3 dimensional effect (refer to page 16). 5. Volume Down Used to reduce the volume of the ASB-10. 6. Volume Up Used to increase the volume of the ASB-10 3 1 2 3 4 5 6 7 8 9 Remote 1. Standby Used to put the ASB-10 in and out of stand by mode. 2. Volume Up Used to increase the volume of the ASB-10. 3. Previous Track Used to select the previous track of the audio source. 4. Volume Down Used to reduce the volume of the ASB-10. 5. Mute Used to mute the sound from the ASB-10. Pressing it again returns the volume to the previous level. 6. 3D Sound Used to change the sound of the ASB-10 to create a 3 dimensional effect (refer to page 16). 7. OK & Play/ Pause Used to confirm a selection when in the menu and also used to play/ pause the audio. 8. Next Track Used to select the next track of the audio source. 9. Input Toggle Used to toggle through the various analogue and digital inputs. Changing the Remote Battery 1. Holding the remote in your hands with the buttons facing up, pull out the draw in the bottom of the remote. 2. Completely remove the drawer to reveal the battery. 3. Replace only with the same type, CR2025 3v. 4. Slide the drawer back into the remote. 4 Making the Connections Now the location has been decided, connect the sources to the ASB-10 ensuring that none of the cables are not kinked or stretched. NOTE: Do not connect the power to the ABS-1 until you have made all of your audio/ video connections. Connecting Audio Devices Via Digital Input You can connect the device to the ASB-10 using the Digital Optical or Digital Coaxial outputs from them. Connecting Analogue Audio Devices Via Coaxial Input You can connect to the ASB-10 using analogue audio source using a 3.5mm mini jack lead. Subwoofer Output To get extra bass from the ASB-10 it has a subwoofer output facility on it. The subwoofer must be purchased seperately. Simply use a coaxial subwoofer lead to connect from the subwoofer output on the ASB-10 to the LFE input of the subwoofer. Refer to page 17 for details on the sub woofer settings. Connecting the Power Now that all of the signal cables are connected, it is now time to connect the power. IMPORTANT: Please follow the following instructions in sequence. 1. Connect the mains lead to the ASB-10 (leaving the switch in the off position). 2. Connect to wall socket and where applicable turn on. 3. Turn the mains power switch on the side of the amp panel to the on position. The ASB-10 will power on straight away. The standby button will illuminate white and the LED on the front will flash blue as it goes through the initial start up process and then slowly flash blue until it is connected to a wireless network or the input changed. 5 LED Colour Matrix The table below shows the various colours and flash patterns associated with the front LED and their meanings. 1
. 2
. 3
. 4
. Description Function Startup Sequence and Standby Normal Operation Firmware Update Errors LED Flashing Patterns Fast flashing Blue Startup Solid Red Standby Flashing Cyan No Paired Bluetooth Device Blinking Blue Bluetooth Green Auxiliary Source White Digital Source Fast Flashing Purple Downloading Firmware Update Fast Flashing Red Amplifier Current/
Thermal Protection The table below shows the names of the flash patterns associated with the LED on the front of the ASB-10. 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms 250ms Pattern Number
#1
#2
#3 6 Owner Information Product Details Model ASB-10 Product Serial No .. Date of Purchase IP Address on Network MAC Address of ASB-10 .. Dealer Details Dealer Name . Address .. .......................................................................................................... Town ................................................................................................ Post code ......................................................................................... Country ............. E-mail address .. 8 m o n i t o r a u d i o . c o . u k Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk Web: www.monitoraudio.com Designed and Engineered in the United Kingdom, made in China Version 1. 2013 Important safety InstructIons GB - Safety InStructIonS fr - conSIGneS de ScurIt It - IStruzIonI per la SIcurezza de - SIcherheItSanweISunGen eS - InStruccIoneS de SeGurIdad pt - InStrueS de SeGurana nl - VeIlIGheIdSInStructIeS CH -
RU -
RU -
aIrstream WARNING I H s L G n e TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT. This lightning flash with an arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. Warning: To reduce the risk of electric shock, do not remove cover (or back), no user-
serviceable parts inside. Refer servicing to qualified service personnel. This exclamation point within an equilateral triangle is intended to alert the user to presence of important maintenance (servicing) instructions in the literature accompanying the appliance. This is a Class II, double insulated apparatus. This apparatus must NOT have a safety connection to Earth. monitoraudio.co.uk 1 Important safety InstructIons 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus with water. 6. Clean only with a dry cloth. Great care and attention has gone into the materials chosen to produce the product. A gentle wipe with a dry, clean cloth is all that is required to remove any dust. Treat it as you would a fine piece of furniture because that is how they have been designed. 7. Do not block any ventilation openings. Install in accordance with Monitor Audios instructions. 8. Do not install near any heat source, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the purpose of the polarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by Monitor Audio. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightening storms, or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen onto the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 15. This apparatus shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. The appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 17. This exclamation point within an equilateral triangle is intended to alert the user to the presence of important maintenance literature accompanying the appliance. instructions
(servicing) the in batterIes 1. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like 2. No naked flame sources, such as lighted candles, should be placed on the apparatus 3. Battery Warning. tecHnIcaL data 1. Temperature range from -5C to 40C, humidity: 20% - 80%. 2. AC input voltage: 90V - 263V (Auto range). 2 Important Safety Instructions I H s L G n e re-cycLInG Correct Disposal of Waste Electrical and Electronic Equipment (WEEE) by User in Private Households in the EU. This symbol on the product or accessories indicates that they must not be disposed of with your household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated WEEE collection point for recycling. The separate collection and recycling of your waste equipment will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more specific information about where you can take your equipment for recycling please contact your local city/council office, your local waste disposal service or the outlet where you purchased your product. roHs decLaratIon of conformIty Directive 2002/95/EC of the European Parliament and of the Council on the reduction of the use of certain hazardous substances in electrical and electronic equipment, January2003. background The RoHS directive restricts the use of Lead (Pb), Cadmium (Cd), Mercury (Hg), hexavalent Chromium (CrVI), polybrominated biphenyl (PBB) compounds, and polybrominated diphenyl ether (PBDE) compounds in electrical and electronic equipment sold in the European Union. fcc fcc radiation exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Connect the equipment into an outlet on a circuit different from that to Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Ic warnInG 1. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. monitoraudio.co.uk 3 Guarantee and servIce cLaIms under tHIs Guarantee To validate your warranty please visit www.monitoraudio.co.uk within 30 days of purchase. When you register online youll gain free entry to our monthly prize draw!
Whats more youll be the first to hear about the great things happening at Monitor Audio, including new products and events!
This equipment has been fully tested prior to dispatch from the factory. Both the craftsmanship and the performance of this product is guaranteed against manufacturing defects for the period of two years from the date of purchase (see conditions below), provided that the product was supplied by an authorised Monitor Audio retailer under the consumer sale agreement. (The words consumer sale shall be construed in accordance with section 15 of the supply of goods act 1973). Monitor Audio accepts no responsibility for defects arising from accident, misuse, abuse, wear and tear, modification or operation outside of that specified within this instruction manual. Neither will responsibility be accepted for damage or loss occurring during transit to or from the parties claiming under this guarantee. This guarantee covers both labour and parts. The liability of Monitor Audio is limited to the cost of repair or replacement of the defective parts (at the discretion of Monitor Audio) and under no circumstances extends to consequential losses or damage. The equipment should be returned in its original packaging to the original supplier where possible, or to any other authorised Monitor Audio dealer. If it is not possible to return the equipment by hand, then it should be sent carriage prepaid via a reputable carrier. If the original packing is not available replacement packaging can be purchased from Monitor Audio. If you have any difficulties complying with these requirements please contact us at the following address:
Customer Service Monitor Audio Ltd. 24 Brook Road Rayleigh Essex, SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Internet: www.monitoraudio.co.uk Email: info@monitoraudio.co.uk This guarantee does not affect the statutory rights of the consumer under UK law. data protectIon We at Monitor Audio are committed to respecting the wishes and privacy of our customers. Any information you provide will be held in the strictest confidence and only used within the Monitor Audio organisation for the provision of services such as warranty claims or spare parts. We may wish to contact you in the future to ensure you are happy with the products and standards of service we provide and to keep you up-to-date with the latest products and promotions we have to offer. Should you wish not to be contacted by us either by post, e-mail or phone, please tick the box on the warranty form on the web site. Alternatively you can request not to be contacted in future by writing to Customer Service, at the address above. 4 Important Safety Instructions I H s L G n e EN6100-3-3: 01.95 Electro magnetic compatibility (EMC) Part 3: Limits Section 3: Limits of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up and including 16 Ampere per phase. Signed by:
Name: D.S. Hartley Position: Technical Director Company: Monitor Audio Ltd EC Declaration of Conformity We, Monitor Audio Ltd. 24 Brook Road Rayleigh Essex SS6 7XJ England 12 Declare in own responsibility, that the Monitor Audio products described in this manual is in compliance with Technical Standards/
Council Directives:
(LVD) 2006/95/EC Low Voltage Directive EN60065: 2002+A1: 2006 Safety requirements for mains operated electronic and related apparatus for household and similar use.
(EMC) 89/336/EEC Electro Magnetic Compatibility EN55013: 08.90+A12:08.94+A13:12.96 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment. EN55020: 12.94+A11:12.96 Electro magnetic immunity of broadcast receivers and associated equipment. EN61000-3-2: 04.95+A1:1998+A2:1998 Electro magnetic compatibility (EMC) Part 3: Limits Section 2: Limits for harmonic current emissions (equipment input current up to and including 16 Ampere per phase). monitoraudio.co.uk 5 consIGnes de scurIt Importantes 6 Important Safety Instructions aIrstream AVERTISSEMENT POUR EVITER UN INCENDIE OU UNE ELECTROCUTION, EVITEZ DE BRANCHER CETTE PRISE SUR UNE RALLONGE, UNE AUTRE PRISE OU UNE PRISE MURALE SI LES BROCHES NE SONT PAS ENTIEREMENT INSEREES. POUR EVITER UN INCENDIE OU UNE ELECTROCUTION, EVITEZ DEXPOSER CET APPAREIL A LA PLUIE OU A UNE ATMOSPHERE HUMIDE POUR EVITER UNE ELECTROCUTION, POSITIONNEZ LA GRANDE BROCHE BIEN EN FACE DE LENCOCHE LA PLUS GRANDE ET INSEREZ-LA ENTIEREMENT. I s a c n a r f Cette flche en forme dclair dans un triangle quilatral attire lattention de lutilisateur sur la prsence dune tension dangereuse non isole lintrieur du chssis de lappareil susceptible de prsenter un risque dlectrocution. Avertissement : pour rduire le risque dlectrocution, ne retirez pas le couvercle (ou larrire) de lappareil. Les pices se trouvant lintrieur ne sont pas rparables par lutilisateur. Adressez-vous un technicien qualifi. Ce point dexclamation lintrieur dun triangle quilatral attire lattention de lutilisateur sur la prsence de consignes de maintenance importantes (entretien) dans les documents accompagnant lappareil. Ce sigle signifie quil sagit dun appareil double isolation de classe II . Cet appareil ne doit en AUCUN cas tre quip dune connection de scurit la terre. monitoraudio.co.uk 7 consIGnes de scurIt Importantes 1. Veuillez lire ces consignes. 2. Veuillez conserver ces consignes. 3. Veuillez tenir compte de tous les avertissements. 4. Veuillez suivre toutes les instructions. 5. Ne pas utiliser cet appareil avec de leau. 6. Nettoyer laide dun linge sec. Un grand soin et une grande attention ont t ports aux matriaux choisis pour la production de ce produit. Un simple coup de chiffon sec et propre suffit pour enlever la poussire. Traitez ces produits comme vous traiteriez un beau meuble, car cest dans cet esprit quils ont t conus. 7. Ne pas obstruer les orifices de ventilation. Procdez linstallation en respectant les instructions de Monitor Audio. 8. Ne pas installer proximit de sources de chaleur telles que des radiateurs, des bouches de chauffage, des poles ou autres appareils (y compris des amplificateurs) susceptibles de produire de la chaleur. 9. Respectez les consignes dutilisation des fiches polarises ou des prises mises la terre. Une fiche polarise dispose de deux broches, lune plus grande que lautre. Une prise mise la terre dispose de deux broches et dune broche de mise la terre. La broche la plus grande ou la broche de mise la terre assurent votre scurit. Si la prise fournie nest pas adapte votre prise murale, faites appel un lectricien pour remplacer la prise murale. 10. Protgez le cordon dalimentation pour viter quil ne soit cras ou pinc, en particulier au niveau de la prise murale, de la prise de courant et lendroit o elle sort de lappareil. 11. Nutiliser que Monitor Audio. les accessoires/auxiliaires recommands par 12. Utiliser uniquement avec le chariot, le trpied, le support ou la table recommands par Monitor Audio ou vendus avec lappareil. Lorsque vous utilisez un chariot, dplacez lensemble chariot/appareil avec prcaution afin dviter toute blessure qui pourrait tre cause par un ventuel dsquilibre. 13. Dbranchez cet appareil en cas dorage ou lorsquil nest pas utilis pendant une longue priode de temps. 14. Pour la maintenance, adressez-vous un personnel de maintenance qualifi. La maintenance est ncessaire lorsque lappareil a t endommag, comme par exemple si le cble ou la prise lectriques sont endommags, si du liquide a t renvers ou si des objets sont tombs sur lappareil, si lappareil a t expos la pluie ou la moisissure, sil na pas t utilis correctement ou encore sil est tomb. 15. Cet appareil ne doit tre expos ni de leau ruisselante ni aux claboussures et aucun objet contenant du liquide, tels quun vase, ne doit tre plac sur lappareil. 16. La prise de courant femelle sert arrter lappareil, le dispositif darrt de lappareil doit rester accessible tout moment. 17. Ce point dexclamation situ lintrieur dun triangle quilatral a pour but davertir lutilisateur de la prsence dimportantes consignes de maintenance dans la documentation fournie avec lappareil. pILes 1. AVERTISSEMENT : la pille (piles, piles ou paquet de piles) ne doit/doivent pas tre expose(s) une chaleur excessive, telle que le soleil, le feu ou autres sources de chaleur similaires. 2. Aucune source de flammes nues, telles que des bougies allumes ne doit tre place sur lappareil. 3. Avertissement concernant la pile. donnees tecHnIQues 1. Plage des tempratures de -5 C 40 C, humidit : 20 % - 80 %. 2. Tension dentre CA : 90 V 263 V (plage Auto). 8 Important Safety Instructions recycLaGe limination correcte des dchets dquipements lectriques et lectroniques
(directive DEEE) par lutilisateur domestique au sein de lUE. Ce symbole indique quau sein de lUE, le produit ou les accessoires qui en sont porteurs ne doivent pas tre jets avec vos ordures mnagres. Pour viter tout danger pour lenvironnement ou pour la sant des tres humains d une limination incontrle des dchets, veuillez recycler ces produits ou accessoires de manire responsable, dans le but de promouvoir la rutilisation des ressources matrielles. Il est de votre responsabilit dliminer vos dchets dquipements en les confiant un centre de collecte approuv par la directive DEEE afin quils y soient recycls. La collecte et le recyclage de vos quipements participera la conservation des ressources naturelles et permettra de sassurer que ces dchets soient recycls de manire protger la fois la sant des tres humains et lenvironnement. Pour des informations plus spcifiques sur les endroits o vous pouvez emporter votre quipement pour recyclage, veuillez contacter le bureau local de votre ville/conseil municipal, votre service local de mise au rebut ou le point de vente o vous avez achet votre produit. dcLaratIon de conformIt La dIrectIve roHs Directive 2002/95/CE du Parlement europen et du Conseil sur la restriction de lutilisation de certaines substances dangereuses dans les quipements lectriques et lectroniques de janvier 2003. cadre La directive RoHS restreint lutilisation du plomb (Pb), du cadmium (Cd), du mercure (Hg), du chrome hexavalent (CrVI), des composants du polybromobiphnyle (PBB) et des composants du polybromodiphnylther dans les appareils lectriques et lectroniques vendus au sein de lUnion europenne. fcc dclaration de la fcc relative lexposition aux radiations Cet quipement est conforme aux limites dexposition aux radiations de la FCC dfinies pour un environnement non contrl. Cet quipement doit tre install et fonctionner avec une distance minimale de 20 cm prsente entre le radiateur et votre corps. Cet appareil est conforme la Partie 15 des rglements de la FCC. Le fonctionnement est sujet aux deux conditions suivantes : (1) il est possible que cet appareil ne provoque pas dinterfrence nuisible, et
(2) cet appareil doit accepter toute interfrence capte, y compris celles qui peuvent provoquer un fonctionnement indsirable. Des changements ou des modifications quelconques non approuvs expressment par la partie concerne tant responsable de la conformit peuvent annuler lautorit de lutilisateur faire fonctionner lquipement. REMARQUE : cet quipement a subi des tests et sest trouv conforme aux limites des appareils numriques de classe B, conformment la Partie 15 des rglements de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie des frquences radio et, sil nest pas install et utilis selon les instructions, peut provoquer des interfrences nuisibles sur les radiocommunications. Toutefois, il nexiste aucune garantie que les interfrences ne se produiront pas dans une installation particulire. Si cet quipement ne provoque pas dinterfrences nuisibles sur la rception radio ou de tlvision, que vous pouvez dterminer en mettant votre quipement hors et sous tension, lutilisateur est encourag essayer de corriger les interfrences en suivant une ou plusieurs des mesures suivantes :
Rorienter ou installer lantenne de rception ailleurs Augmenter la sparation entre lquipement et le rcepteur Brancher lquipement sur une prise sur un circuit diffrent de celui o le rcepteur est branch Consultez le dtaillant ou un technicien radio/TV expriment pour obtenir de laide. I s a c n a r f monitoraudio.co.uk 9 avertIssement Ic 1. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 2. Des changements ou des modifications quelconques non approuvs expressment par la partie concerne tant responsable de la conformit peuvent annuler lautorit de lutilisateur faire fonctionner lquipement. GarantIe et servIce Pour valider votre garantie, veuillez vous rendre sur www.monitoraudio.co.uk dans un dlai de 30 jours suivant votre achat. Votre inscription en ligne vous permet de gagner une participation gratuite notre tirage au sort mensuel ! Vous pourrez galement y dcouvrir en exclusivit les actualits de Monitor Audio, y compris les nouveaux produits et les vnements !
Cet appareil a subi une batterie complte de tests avant de sortir de lusine. la fois la conception et la performance de ce produit sont garantis contre les dfauts de fabrication pendant une priode deux annes compter de la date dachat (voir conditions ci-dessous), condition que le produit soit distribu par un revendeur agr de Monitor Audio et par un contrat de vente au consommateur. (Le terme vente au consommateur doit tre interprt conformment la section 15 de la loi britannique sur la vente et la distribution de marchandises de 1973, le Supply of Goods Act). Monitor Audio ne pourra en aucun cas tre tenu responsable des dfauts rsultant dun accident, dune mauvaise utilisation, dun mauvais traitement, dune dgradation, dune modification ou dune utilisation autre que celle prcise dans ce manuel dutilisation. Lentreprise ne pourra non plus tre tenue responsable des dgts ou pertes survenus lors du transport entre les diffrentes parties auxquelles ces garanties sappliquent. Cette garantie couvre la fois la main duvre et les pices. La responsabilit de Monitor Audio est limite au cot de la rparation ou du remplacement des pices dfectueuses ( la discrtion de Monitor Audio) et ne stend en aucun cas aux pertes ou aux dgts engendrs. 10 rcLamatIons en vertu de cette GarantIe Lappareil doit tre retourn, si possible, au fournisseur dorigine dans son emballage dorigine ou tout autre revendeur agr de Monitor Audio. Sil est impossible de retourner lappareil par porteur, il faut alors lenvoyer par port prpay via un transporteur fiable. Si lemballage dorigine nest plus disponible, il est possible dacheter un emballage de remplacement auprs de Monitor Audio. En cas de difficults respecter ces conditions, veuillez nous contacter ladresse suivante :
Customer Service Monitor Audio Ltd. 24 Brook Road Rayleigh Essex, SS6 7XJ Angleterre Cette garantie naffecte pas les droits lgaux des consommateurs soumis au droit du Royaume-Uni. Tl. : +44 (0)1268 740580 Fax : +44 (0)1268 740589 Internet : www.monitoraudio.co.uk Email : info@monitoraudio.co.uk protectIon des donnes Chez Monitor Audio, nous nous engageons respecter les souhaits et la vie prive de nos clients. Toutes les informations transmises resteront strictement confidentielles et ne seront utilises quau sein de Monitor Audio pour la prestation de services tels que lapplication de la garantie ou les pices de rechange. Il est possible que nous souhaitions vous contacter lavenir afin de nous assurer que les produits et les services que nous fournissons vous apportent entire satisfaction et pour vous tenir au courant de nos tout derniers produits et promotions. Si vous ne souhaitez tre contact(e) ni par courrier, ni par e-mail, ni par tlphone, veuillez cocher la case approprie sur le formulaire de garantie disponible sur notre site Web. Vous pouvez galement demander ne pas tre contact(e) lavenir en crivant au service client (Customer Service) ladresse mentionne ci-dessus. Important Safety Instructions Dclaration de conformit CE Nous, Monitor Audio Ltd. 24 Brook Road Rayleigh Essex SS6 7XJ Angleterre EN6100-3-3: 01.95 Comptabilit lectromagntique (EMC) Partie 3 : Limites Section 3 Limites de fluctuation de tension et oscillation des circuits dalimentation basse tension pour les quipements actuellement limits 16 ampres par phase. Sign :
12 Nom : D.S. Hartley dclarons en notre propre responsabilit que les produits Monitor Audio dcrits dans ce manuel sont conformes aux normes techniques/aux directives du Conseil. Fonction : Directeur technique Entreprise : Monitor Audio Ltd I s a c n a r f
(LVD) 2006/95/CE Directive Basse Tension EN60065: 2002+A1: Normes de scurit de 2006 concernant les appareils lectroniques usage lectromnager et les appareils similaires
(EMC) 89/336/CEE Comptabilit Electromagntique EN55013: 08.90+A12:08.94+A13:12.96 Limites et mthodes de mesure des caractristiques de perturbations radio sur les metteurs-rcepteurs et sur les quipements associs. EN55020: 12.94+A11:12.96 Immunit lectromagntique des metteurs-rcepteurs et des quipements associs. 04.95+A1:1998+A2:1998 EN61000-3-2:
Comptabilit lectromagntique (EMC) Partie 3 : Limites Section 2 Limites pour les missions harmoniques actuelles (lintensit limite actuelle dun quipement est de 16 ampres par phase) monitoraudio.co.uk 11