KEYPAD K622 FCC ID : FKD46AK622 1 00/06/14 FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Shielded interface cables must be used in order to comply with emission limits. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2 00/06/14 1. Scope:
The MONTEREY Slim Key PAD K622 is 18/19 keys standard numeric layout. It is compatible with IBM PC USB and compatible personal computer. 2. Features:
! Fashion Styling
! 18/19 standard numeric layout
! Microsoft Windows compatible
! IBM PC USB compatible
! Laser engraved printing
! Nice feeling, light touch membrane tactile switches
! Compact low profile 3. Specification:
3.1 Power Requirement Input Voltage: DC 4.75V to 5.25V Input Current: 300 mA max. 3.2Cable Connector PIN G D+
D-
V SIGNAL Ground VP VM VCC Shield Frame Ground 3.3Contact Resistance : 500 ohm Max. 3.4Insulation Resistance : 100 ohm, 250V DC 3.5Bounce : 10 MilliSecond 3 00/06/14