FCC ID: 2BAYQINTF001 Interface

CUBETTO Instruction Guide Book 0 BE CAREFUL!

Warning! Not suitable for children under 3 years. Small parts. Choking Hazard. Only operate the toy indoors under adult supervision. Assemble and set up with an adult too. Do not open your Cubetto, remove internal components, operate if damaged, and/or if broken. Rechargeable batteries can be used, but may not last long. Do not mix alkaline batteries, standard (carbon-zinc) or rechargeable (nikel-cadmium) batteries. Remove batteries after long periods of inactivity. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are only to be charged under adult supervision. Rechargeable batteries are to be removed from the toy before being charged. Different types of batteries or new and used batteries are not to be mixed. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy. The supply terminals are not to be short-circuited. For tips & hints on using the playset visit primotoys.com/resources Illustrations by Momo For other languages visit www.primotoys.com/manuals_and_books Bedienungsanleitungen & Geschichtenbcher Handleidingen & Verhalenboeken Nvody k pouit & Knihy s pbhy Modes demploi & Livres dhistoire Manuales de instrucciones & Libros de cuentos Hi!

Im Cubetto, the little wooden robot who loves to explore and play, but I need your help!

Will you be my friend and help me find my way?

Lets get started!

In my box you will find:

1. Me! - Cubetto the wooden robot 2. Interface Board - My control panel 3. 16 Blocks - My commands 4. World Map - My playground for adventure!

3 Cubetto 1 Im always ready for adventure. Take me out of the box so we can meet!

As you can see, I have two wheels. Each wheel has one motor. My shell is wood, my bones are plastic, and my brain is a computer. All thats missing is you to give me directions. 4 5 Queue Board 2 My Board is very important. Its how you talk to me. Use it with my colourful blocks and tell me where to go. On my Board are my Queue, my Function Line, and a Go button. 6 Go Function Line 7 Blocks 3 My blocks come in different shapes and colours. Each one gives me a different instruction. When you place a block into my Board and hit Go I will make my move. A series of blocks in a row is called a program. These are my basic commands:

Green - moves me forward 15 cm Red - turns me right 90 Yellow - turns me left 90 Blue - executes a function 8 Forward Right Left Function 90 90 9 World Map 4 My maps are playgrounds for our adventures. There are many exciting places we can explore together. Do you see how it is made up of lots of squares? This is called a grid. It will help you see where I can go. I love new experiences and have several maps to collect. Whenever youre ready for something new, just grab a new map!

WE N S 10 11 Power and pair 5 To get me started I need six AA batteries, three for me, and three for my Board. Flip us upside down and insert the batteries. Once done, switch us both ON. I will beep and my Boards lights will flash. 12 Next, we need to be paired. Do this by placing one green block on the first space of the board and hit Go. I should move forward. If I dont, turn us both off, then try again. 13 Programming Cubetto 6 To write a program, place the blocks in a sequence on my Board. Notice how my Queue curves like a snake? This is the order you must follow. Once youve written your program, hit the Go button and watch me head off. 14 15 Function Line 7 Remember the Function Line? It can do some really cool things. Let me teach you... If you want to give the same set of directions more than once, put that sequence in the Function Line. Now you can use the blue block in the Queue every time you want to recall that sequence. This is called a subroutine.. 16 17 Now that you know all about me, lets play!

When you are ready, open Cubettos First Day to learn a little more and see if youre up to some challenges!

18 Need help?

Want it in your school? edu@primotoys.com Want to chat with us? support@primotoys.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different form that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cubetto FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. IC Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Interface IC Statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Manufactured by MORAVIA Consulting spol. s r.o. Olomouck 83, 627 00 Brno, Czech Republic 19 Designed in London, printed in China 2021 MORAVIA Consulting spol. s r.o. ALL RIGHTS RESERVED by FIAMO primotoys.com a==m==i m==`~

OMNS==p=i~=iqa

^ii=ofdeqp=obpbosba m=q==~=~~==p=i~=iqa Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. primotoys.com Please keep the instruction sheet since it contains important information.

,,, MORAVIA CONSULTING Commission Division Communications Federal Authorization and Evaluation 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 24.05.2023 Ref: Attestation FCC ID: 2BAYQINTF001 Statement Part 2.911(d}(7) Filing spol. s r.o. certifies MORAVIA Consulting, Compliance Consulting process an agent for no less than one year after the grantee has terminated importation of any commission-related FCC ID. MORAVIA Consulting, for the above referenced or the conclusion LLC dba iCertifi

"iCertifi"

proceeding that, as of the dates of this application, of is our designated U.S. agent for service Americas to maintain spol. s r.o. accepts all marketing and involving the equipment. accepts, iCertifi U.S. agent for service process for the above referenced FCC ID. as of the date of the filing of the application, the obligation of the designated Designated U.S. Agent Information:

Compliance Name: Americas FCC FRN: 0033399411 Address:

1001 SW Disk Drive, Contact Person: Paul Preston Tel: 866-885-4575 Email: fccagent@icertifi.com consulting, LLC dba iCertifi Suite 250, Bend, Oregon 97702 Sincerely, MORAVIA Consulting, FRN:0033687195 Alois Hubl, Managing spol. s r.o. director Americas Compliance LLC dba Consulting Paul Preston iCertifi MORAVI.0, C(J11S\Jlfo1. spol. s r.o. 83, CZ-627 DD Brno Olornoucka

+420 541422511, fax: +420 541422510 tel.:

info@rnoravia-consulting.com www.rnoravia-consulting.com DIC: CZ49967550 ICO:49967550, obchodnfho OR u Krajskeho soudu Brno C-13303

APPENDIX E MORAVIA Consulting, spol. s r.o. Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2BAYOINTFO01 To Whom It May Concern:

x] Permanent Confidentiality | Complete this section if permanent contidentiality is requested]

Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

[| Se/ect one or more of items below, as appropriate, and delete unselected parts|

Schematics Block Diagrams Operational Description Internal Photos (see note) OOkwtR Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user's manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required:

1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Rationale for request for confidentiality:

We have invested considerable time and materials in research and development to produce the referenced product. 1 Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, oat Ss S id owns

MORAVIA Consulting, spol. $ r.o. Radim Frydrych Project Manager 19.04.2023

MORAVIA APPENDIX B CONSULTING 19.04.2023 Federal Communications Commission 445 12** Street SW Washington, DC 20554 Subject: Limited Agency Agreement MORAVIA Consulting, spol. s r.o. FCC ID: 2BAYOINTFO001 To Whom It May Concern:

We, MORAVIA Consulting, spol. s r.o., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number: 2BAYOINTF001 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 19.04.2023. The Limited Agency Agreement expires on 19.04.2024 unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, we MORAVIA Consulting, spol. s r.o. Radim Frydrych . Project Manager MORAVIA Consulting, spol. s r.o. Olomoucka 83, CZ 627 00 Brno tel.; +420 541 422 511, fax: +420 541 422 510 info@moravia-consulting.com WWW.moravia-consulting.com ICQ: 49967550, DIC: CZ49967550 OR u Krajskho obchodniho soudu Brno -13303