FCC ID: AB3-OM400 Offender / Asset Tracker

Omnilink OM400 User Guide Index Contents [Placeholder]

Contents Title Page [Placeholder] ................................................................................................................................ 1 Index Contents [Placeholder] ..................................................................................................................... 2 Notes and Copyrights .................................................................................................................................... 3 1 2 3 4 5 Device Images and Components ........................................................................................................... 4 Device Features and Specifications....................................................................................................... 5 Device Set-Up ........................................................................................................................................ 5 3.1 3.2 3.3 3.4 Charging Your Device .................................................................................................................... 5 Setting Up Your Device in the FocalPoint Offender Monitoring Application ............................... 5 Installing Your Device on an Offender .......................................................................................... 5 Finalizing Set-up in the FocalPoint Application ............................................................................. 7 Removing a Device ................................................................................................................................ 7 Storing the Device ................................................................................................................................. 7 6 Using the RF Beacon ............................................................................................................................. 7 Important Safety Information ............................................................................................................... 8 Contacting Omnilink.............................................................................................................................. 9 7 8 Notes and Copyrights All rights reserved. The trademarks used in this document are registered and/or proprietary trademarks of their respective owners and can be used only for lawful purposes. Functions and services are dependent on the networks. Some networks limit the usage of the tracking device and their applications. Contact your local network operator for more information as to the services supported by the network. This document was published by Omnilink Systems, Inc. No responsibility is taken as to the accuracy of the information, software and data contained in this manual. In order to bring about continuous improvement, the details, the design and all that is described in this document can be modified prior to notice. Omnilink Systems, Inc. reserves the right to withdraw this document from circulation at any stage. The contents of this document cannot be copied, modified or used in any other way, either wholly or in part, without the consent of Omnilink Systems, Inc. Under no circumstances can Omnilink Systems, Inc. be held responsible for data loss, unrealized gains or any other direct or indirect damage, however caused. Registered Trademarks Omnilink, FocalPoint, and OM400 are registered trademarks and registered service marks of Omnilink Systems, Inc. 1 Device Images and Components 2 Device Features and Specifications Feature Location Technology Battery Life Charging Time Weight Total Waterproof Memory Offender Communication Offender Response Details GPS / AFLT / RF 30 Hours

~90 Minutes 8.4 oz. IP67 Rated for 1 Meter Depth Stores 10 Days of Data Sends Vibrate & Tone Single Button for Acknowledgement 3 Device Set-Up 3.1 Charging Your Device Before you install and use the device it will be necessary to charge the battery:

Step 1: If not already connected, attach the device adapter into the wall adapter. Step 2: Then, plug the fully assembled device into the device charger for 3 hours. After 3 hours, the LED should be green indicating a full charge. Step 3: After charging, remove the device from the charger, and unplug the charger from the wall outlet. 3.2 Setting Up Your Device in the FocalPoint Offender Monitoring Application You must log into FocalPoint and complete two essential and two optional steps before you install the device:

Step 1: Assign a rate plan to the device (i.e. the frequency the device should be located) Step 2: Assign an offender to the device Step 3: (Optional) Assign Zones and Schedules for the Offender & Device Step 4: (Optional) Assign a RF Beacon to the device and assign a home zone for the beacon You can locate instructions for completing these tasks by navigating to FocalPoints Help center, located in the bottom, left-hand corner of the FocalPoint websites screen. 3.3 Installing Your Device on an Offender Ensure the device is fully charged and turned on. You will be installing the device on an individuals leg. Have that individual stand facing a chair, with the installation leg bent, shin resting on the chair seat, with the foot pointing behind them. Alternatively, have the individual sit in a chair with their installation leg propped up in front of them, on a desk or other flat surface. Step 1: You must disassemble the device, separating device components before you can install the device on an ankle. Remove the top pin from the device entirely by pulling the pin upwards. Remove the bottom pin entirely by pulling the pin downward. Then pull the device and the back plate apart from one another, removing them from the strap. Set the device aside. Step 2: Hold the back plate against the side of either leg, just above the ankle, with the inside of the back plate facing away from the body. If installing on a left leg, the end of the back plate that contains the locking posts should point toward the heel of the foot and the end with the locking guides should point toward the foots toes. If installing on a right foot, the opposite is true. Step 3: While holding the back plate against the leg with one hand, place the strap on top of the back plate so that the strap retaining bracket points toward the heel, and the strap retaining brackets jut outward, facing away from the body. The side of the strap with the words Facing Inside should be touching the back plate. Make sure to place one of the sets of strap holes over the back plates locking posts. Step 4: While holding the back plate and strap against the leg with one hand, bend the blunt end of the strapthe end without retaining bracketsaround the leg, holding it tightly against the leg. Then bend the other end of the strapthe end with retaining bracketsthe opposite direction around the leg. The strap should fully encircle the leg so that the straps retaining brackets reach the back plates strap retaining pins, and the pins fit inside the larger end of the retaining bracket holes. If the straps retaining brackets dont reach the back plates strap retaining pins, repeat the previous step, choosing a different set of strap holes to place over the back plates locking posts. Repeat as necessary, choosing different sets of strap holes, until the straps retaining brackets reach the back plates strap retaining pins. Step 5: Once the straps retaining pins are inside the larger end of the retaining bracket holes, slide the pins posts into the narrow ends of the retaining bracket holes. The back plate and strap should now be locked together, around the leg. Step 6: Take the device and place it, Omnilink label facing outward, down on the strap and back plate at an angle, so that the devices locking tabs hook underneath the back plates locking guides. Once locked, roll the device closed until the device is flush with the back plate. Step 7: Insert the top pin in the device so that the head of the pin fits into the corresponding contours of the device and is flush with the device. Step 8: Align the raised bump on the top of the bottom pin with the similar notch on the device. Insert the bottom pin until it sits flush with the device. Step 9: Press both the top pin and bottom pin into the device simultaneously, ensuring that they are both locked in place. Step 10: Ensure that the device is securely attached to the ankle, ensuring the Omnilink label is readable. 3.4 Finalizing Set-up in the FocalPoint Application Once the device is installed, users must log into FocalPoint to clear the device tamper alerts and confirm that the device is being tracked successfully. Step 1: Log into FocalPoint Step 2: On the home page, search for any Device Tamper icons for the device. Step 3: Click the Device Tamper icon so that the tamper details window opens. Step 4: Click the Clear Alert button on the alert details screen. Step 5: Before releasing the offender, wait until two location points are received to verify that FocalPoint is successfully tracking the device and that no device tamper alert has returned to the screen. If a tamper alert does appear, exchange pins. 4 Removing a Device Step 1: Direct the individual to place the heel of their shoe on the edge of the table. Step 2: Using a flat-head screwdriver, turn the bottom pin until its head snaps off and the top pin pops out of the device. Step 3: Push a paperclip or other thin instrument into the top pin hole in order to expel the broken body of the bottom pin from the device. Step 4: Remove the device from the leg by reversing the installation process. 5 Storing the Device The device should be stored with the strap and back plate positioned as if the device is on an offender. The strap needs to remain in a circular position so it stays soft and pliable. Store the device with only the top pin inserted. When possible, the device should be plugged into an electrical outlet to ensure that it has been charged for at least 3 hours prior to use. 6 Using the RF Beacon If you purchase an RF Beacon to be used with your OM400 there are a few simple steps to set up the Beacon for use. Step 1: When creating an offender and a home zone, check the box market Assign a Beacon to this device and Home Zone Step 2: In the select/assign beacon screen please select the beacon device number you wish to assign to this offender and select Assign Alternate Set-Up If you wish to assign a beacon outside of the initial offender set-up process, take the following steps. Step 1: Click the Manage Devices button under the Administration tab on the top right of the application Step 2: Select the beacon device number you wish to assign to the OM400 and select Assign Step 3: Choose the zone you would like to assign to this beacon from the zone selection page 7 Important Safety Information and Regulatory Notices Interference This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause

(2) undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le onctionnement. Modifications Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment. Radio Frequency (RF) Exposure This ankle worn radio device has been evaluated and found to be compliant with the requirements as set forth in FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. This device is to be used solely by law enforcement agencies for tracking purposes and must be professionally installed. The average radiation output power of this device falls below the FCC radio frequency exposure limits. The user must be informed that this device emits RF energy and found to comply with all health and welfare agencies. This device is intended for body worn operation. This device has been tested and meets the FCC RF exposure guidelines when used with the strap accessory supplied by Omnilink and designated for this product. Use of other accessories is not recommended and may not ensure compliance with FCC RF exposure guidelines. 8 Contacting Omnilink For questions regarding Technical Issues, contact:

Omnilink Technical Support 800-863-5248 techsupport@omnilink.com For Orders and Returns, contact:

Orders and Returns 800-228-1203 ordersandreturns@omnilink.com

Omnilink OM400 User Guide Index Contents Contents Title Page ....................................................................................................................................................... 1 Index Contents ........................................................................................................................................... 2 Notes and Copyrights .................................................................................................................................... 3 1 Device Images and Components ............................................................................................................ 4 2 Device Features and Specifications ........................................................................................................ 5 3 Device Set-Up ......................................................................................................................................... 5 3.1 Charging Your Device ...................................................................................................................... 5 3.2 Setting Up Your Device in the FocalPoint Offender Monitoring Application ............................. 5 3.3 Installing Your Device on an Offender ............................................................................................. 5 3.4 Finalizing Set-up in the FocalPoint Offender Monitoring Application........................................ 7 4 Removing a Device ................................................................................................................................. 7 5 Storing the Device .................................................................................................................................. 7 6 Using the OM400 RF Beacon ............................................................................................................... 7 7 Important Safety Information and Regulatory Notices .......................................................................... 8 8 Contacting Omnilink ............................................................................................................................. 8 Notes and Copyrights All rights reserved. The trademarks used in this document are registered and/or proprietary trademarks of their respective owners and can be used only for lawful purposes. Functions and services are dependent on the networks. Some networks limit the usage of the tracking device and their applications. Contact your local network operator for more information as to the services supported by the network. This document was published by Omnilink Systems, Inc. No responsibility is taken as to the accuracy of the information, software and data contained in this manual. In order to bring about continuous improvement, the details, the design and all that is described in this document can be modified prior to notice. Omnilink Systems, Inc. reserves the right to withdraw this document from circulation at any stage. The contents of this document cannot be copied, modified or used in any other way, either wholly or in part, without the consent of Omnilink Systems, Inc. Under no circumstances can Omnilink Systems, Inc. be held responsible for data loss, unrealized gains or any other direct or indirect damage, however caused. Registered Trademarks Omnilink and FocalPoint are registered trademarks and registered service marks of Omnilink Systems, Inc. 1 Device Images and Components 2 Device Features and Specifications Feature Location Technology Battery Life Charging Time Weight Total Waterproof Memory Offender Communication Offender Response Details GPS / AFLT / RF 30 Hours

~90 Minutes 8.4 oz. IP67 Rated for 1 Meter Depth Stores 10 Days of Data Sends Vibrate & Tone Single Button for Acknowledgement 3 Device Set-Up 3.1 Charging Your Device Before you install and use the device it will be necessary to charge the battery:

Step 1: If not already connected, attach the device adapter into the wall adapter. Step 2: Then, plug the fully assembled device into the device charger for 3 hours. After 3 hours, the LED should be green indicating a full charge. Step 3: After charging, remove the device from the charger, and unplug the charger from the wall outlet. 3.2 Setting Up Your Device in the FocalPoint Offender Monitoring Application You must log into FocalPoint and complete two essential and two optional steps before you install the device:

Step 1: Assign a rate plan to the device (i.e. the frequency the device should be located) Step 2: Assign an offender to the device Step 3: (Optional) Assign Zones and Schedules for the Offender & Device Step 4: (Optional) Assign a RF Beacon to the device and assign a home zone for the beacon You can locate instructions for completing these tasks by navigating to FocalPoints Help center, located in the bottom, left-hand corner of the FocalPoint websites screen. 3.3 Installing Your Device on an Offender Ensure the device is fully charged and turned on. You will be installing the device on an individuals leg. Have that individual stand facing a chair, with the installation leg bent, shin resting on the chair seat, with the foot pointing behind them. Alternatively, have the individual sit in a chair with their installation leg propped up in front of them, on a desk or other flat surface. Step 1: You must disassemble the device, separating device components before you can install the device on an ankle. Remove the top pin from the device entirely by pulling the pin upwards. Remove the bottom pin entirely by pulling the pin downward. Then pull the device and the back plate apart from one another, removing them from the strap. Set the device aside. Step 2: Hold the back plate against the side of either leg, just above the ankle, with the inside of the back plate facing away from the body. If installing on a left leg, the end of the back plate that contains the locking posts should point toward the heel of the foot and the end with the locking guides should point toward the foots toes. If installing on a right foot, the opposite is true. Step 3: While holding the back plate against the leg with one hand, place the strap on top of the back plate so that the strap retaining bracket points toward the heel, and the strap retaining brackets jut outward, facing away from the body. The side of the strap with the words Facing Inside should be touching the back plate. Make sure to place one of the sets of strap holes over the back plates locking posts. Step 4: While holding the back plate and strap against the leg with one hand, bend the blunt end of the strapthe end without retaining bracketsaround the leg, holding it tightly against the leg. Then bend the other end of the strapthe end with retaining bracketsthe opposite direction around the leg. The strap should fully encircle the leg so that the straps retaining brackets reach the back plates strap retaining pins, and the pins fit inside the larger end of the retaining bracket holes. If the straps retaining brackets dont reach the back plates strap retaining pins, repeat the previous step, choosing a different set of strap holes to place over the back plates locking posts. Repeat as necessary, choosing different sets of strap holes, until the straps retaining brackets reach the back plates strap retaining pins. Step 5: Once the straps retaining pins are inside the larger end of the retaining bracket holes, slide the pins posts into the narrow ends of the retaining bracket holes. The back plate and strap should now be locked together, around the leg. Step 6: Take the device and place it, Omnilink label facing outward, down on the strap and back plate at an angle, so that the devices locking tabs hook underneath the back plates locking guides. Once locked, roll the device closed until the device is flush with the back plate. Step 7: Insert the top pin in the device so that the head of the pin fits into the corresponding contours of the device and is flush with the device. Step 8: Align the raised bump on the top of the bottom pin with the similar notch on the device. Insert the bottom pin until it sits flush with the device. Step 9: Press both the top pin and bottom pin into the device simultaneously, ensuring that they are both locked in place. Step 10: Ensure that the device is securely attached to the ankle, ensuring the Omnilink label is readable. The device should be placed low and tight on the outer side of the leg. The device cannot be removed or repositioned by the wearer without destroying the strap or pins. The device must remain located at the outer side of the leg. 3.4 Finalizing Set-up in the FocalPoint Offender Monitoring Application Once the device is installed, users must log into FocalPoint to clear the device tamper alerts and confirm that the device is being tracked successfully. Step 1: Log into FocalPoint Step 2: On the home page, search for any Device Tamper icons for the device. Step 3: Click the Device Tamper icon so that the tamper details window opens. Step 4: Click the Clear Alert button on the alert details screen. Step 5: Before releasing the offender, wait until two location points are received to verify that FocalPoint is successfully tracking the device and that no device tamper alert has returned to the screen. If a tamper alert does appear, exchange pins. 4 Removing a Device Step 1: Direct the individual to place the heel of their shoe on the edge of the table. Step 2: Using a flat-head screwdriver, turn the bottom pin until its head snaps off and the top pin pops out of the device. Step 3: Push a paperclip or other thin instrument into the top pin hole in order to expel the broken body of the bottom pin from the device. Step 4: Remove the device from the leg by reversing the installation process. 5 Storing the Device The device should be stored with the strap and back plate positioned as if the device is on an offender. The strap needs to remain in a circular position so it stays soft and pliable. Store the device with only the top pin inserted. When possible, the device should be plugged into an electrical outlet to ensure that it has been charged for at least 3 hours prior to use. 6 Using the OM400 RF Beacon If you purchase an OM400 RF Beacon to be used with your OM400 there are a few simple steps to set up the Beacon for use. Step 1: When creating an offender and a home zone, check the box market Assign a Beacon to this device and Home Zone Step 2: In the select/assign beacon screen please select the beacon device number you wish to assign to this offender and select Assign Alternate Set-Up If you wish to assign a beacon outside of the initial offender set-up process, take the following steps. Step 1: Click the Manage Devices button under the Administration tab on the top right of the application Step 2: Select the beacon device number you wish to assign to the OM400 and select Assign Step 3: Choose the zone you would like to assign to this beacon from the zone selection page 7 Important Safety Information and Regulatory Notices Interference This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) lappareil ne doit pas produire de brouillage, et 2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le onctionnement. Modifications Changes or modifications made to this equipment not expressly approved by Omnilink may void the FCC authorization to operate this equipment. Radio Frequency (RF) Exposure This ankle worn radio device has been evaluated and found to be compliant with the requirements as set forth in FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. This device is to be used solely by law enforcement agencies for tracking purposes and must be professionally installed. The average radiation output power of this device falls below the FCC radio frequency exposure limits. The user must be informed that this device emits RF energy and found to comply with all health and welfare agencies. This device is intended for body worn operation. This device has been tested and meets the FCC RF exposure guidelines when used with the strap accessory supplied by Omnilink and designated for this product. Use of other accessories is not recommended and may not ensure compliance with FCC RF exposure guidelines. 8 Contacting Omnilink For questions regarding Technical Issues, contact:

Omnilink Technical Support 800-863-5248 techsupport@omnilink.com For Orders and Returns, contact:

Orders and Returns 800-228-1203 ordersandreturns@omnilink.com

Omnilink OM400 Morey Corporation Confidential & Proprietary. Reuse and/or Reproduction without written consent of The Morey Corporation is Strictly Prohibited Omnilink Tracker OM 400 Morey Corporation Confidential & Proprietary. Reuse and/or Reproduction without written consent of The Morey Corporation is Strictly Prohibited Omnilink Tracker OM 400 BUZZER FERRITE PCB BOARD Morey Corporation Confidential & Proprietary. Reuse and/or Reproduction without written consent of The Morey Corporation is Strictly Prohibited Omnilink Tracker OM 400 RF BOARD BATTERY

(WITHIN CARRIER) BATTERY CARRIER 9-PIN CABLE HARNESS GPS ANTENNA Morey Corporation Confidential & Proprietary. Reuse and/or Reproduction without written consent of The Morey Corporation is Strictly Prohibited Omnilink Tracker OM 400 PUSH BUTTON SWITCH FERRITE CDMA ANTENNA BATTERY WIRE HARNESS Morey Corporation Confidential & Proprietary. Reuse and/or Reproduction without written consent of The Morey Corporation is Strictly Prohibited SWITCH WIRE HARNESS

D C B A 4 3 2 NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL - CLEAR POLYESTER, 0.007" THICK, WITH 3M F9469PC ADHESIVE BACK SIDE ONLY (0.005" THICK) 2. COLOR - BLACK BACKGROUND, WHITE TEXT AND LOGO 3. THIS IS THE ONLY AREA TO BE FREE OF ANY AND ALL ADHESIVE 4. UL 94 FLAMMABILITY RATING: V-0 REV A B XC DWG: 32P099 REVISION BY EFF/DISP CHECK GWC 8/10/12 GWC 8/23/12 APPVL DAB 8/10/12 DAB 8/23/12 DESCRIPTION RELEASE FOR PRODUCTION TAD 8/10/12 TAD 8/23/12 CORRECTIONS TO LABEL TEXT REVISED FCC AND IC ID RW 2-18-13 NUMBERS PER ECO ADDED No. MODEL: OM400 RW 3-13-13 AND REMOVED THE FCC LOGO 4-01-13 FROM LABEL AND WATERMARK GWC 2-18-13 GWC 2-18-13 GWC 03-13-13 JFC 03-13-13 1.630

.140 NO COLOR THIS AREA R.19 4X R.04 R.04 1.860 2.160

.500

.895 1.000 FRONT SIDE Ra.193 Rb.350 2X .150 REF

.700 REF BACK SIDE

.007

.385 SEE NOTE 3

.069

.023 SECTION B-B SCALE 4.000

.020 R.020 R.020 SECTION A-A SCALE 6.000

.194

.300

.494

.600 SCALE 4.000 This document is an UNCONTROLLED copy. Prior to use, ensure this document is the most recent revision. SCALE 4.000 NOTICE: THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF THE MOREY CORPORATION. NEITHER RECEIPT NOR POSSESSION THEREOF CONFERS ANY RIGHT TO REPRODUCE, USE OR DISCLOSE IN WHOLE OR IN PART, ANY SUCH INFORMATION WITHOUT WRITTEN AUTHORIZATION FROM THE MOREY CORPORATION. DOCUMENT GENERATED BY COMPUTER GRAPHICS. CHANGES BY HAND ARE NOT AUTHORIZED. 4 3 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES DECIMAL TOL DIMENSIONS APPLY AFTER PLATING XX = .01 XXX = .005

.5 ANGLES ALL OVALED DIMENSIONS ARE CRITICAL CHARACTERISTICS HOLE TOLERANCES

.013 THRU .125 +.004 /-.001

.126 THRU .250 +.005 /-.001

.251 THRU .500 +.006 /-.001 2 APPROVAL J. LEDVORA G. COOPER DATE 12/06/11 12/06/11

-001 THE MOREY CORPORATION WOODRIDGE, ILLINOIS, 60517 U.S.A. TITLE:

LABEL, OM400 04377 CAGE CODE SIZE C SCALE: 2.000 DRAWING NO. 32P099 REV XC DO NOT SCALE PRINT SHEET: 1 OF 1 1 DRAWN:

CHECK:

ENGR:

MFG:

QA:

APVD:

D C B C X

. V E R 9 9 0 P 2 3

:

G W D

To Whom It May Concern:

Subject: Validity of Test Results from Testing / Certification of the integrated Module WE, The Morey Corporation 100 Morey Drive Woodridge IL, 60517 This is to confirm that that the results from conducted tests applied to the radio modules a.) Telit, CDMA module, FCC ID: RI7CC864-DUAL b.) Microchip Technology, Inc., Zigbee module OASMRF24J40MA which are incorporated in our host equipment Offender / Asset Tracker, FCC ID: AB3-OM400, IC: 10424A-

OM400 and as reported in module test test report(s) a.) HCT-RF09-0716, issued July 16, 2009, by HCT Co., Ltd., Korea b.) Report Number 3147916BOX-004, May 13, 2008, Intertek ETL SEMKO, USA accurately represent the test results under the new conditions when the identified radio module is integrated in the identified host equipment. By integration of the said radio module into the identified host equipment no changes were made to it or by external adaptation circuitry that impacts the validity of the results of the original modules test reports. Name Jon F. Cook Senior Program Manager Signature CLM Dated: 5-15-13

(~ MOREY

(MOREY February 19, 2013 Receiver Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Subject: Request for Permanent Confidentiality FCC ID: AB3 - OM400 To Whom It May Concern:

In accordance with 0.457(d) and 0.459 of CFR 47, The Morey Corporation requests permanent confidentiality for the following items:

1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational Description These items contain detailed system and equipment description and related information about the product which The Morey Corporation considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, The Morey Corporation also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Best Regards, Jon F Cook | The Morey Corporation | Sr. Program Manager On behalf of The Morey Corporation 100 Morey Drive Woodridge IL, 60517 The Morey Corporation | 630.754.2300 | 100 Morey Drive, Woodridge, IL 60517 www.moreycorp.com

(MOREY March 13, 2013 Subject: Request for Short Term Confidentiality FCC ID: AB3-OM400 To Whom It May Concern:

In accordance with 0.457(d) and 0.459 of CFR 47, The Morey Corporation requests short term confidentiality for the following items until 90 days from Grant date:

1. External Photographs 2. Internal Photographs 3. User Manual These items contain detailed system and equipment description and related information about the product which The Morey Corporation considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, The Morey Corporation also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Best Regards, VFL Jon F Cook | The Morey Corporation | Sr. Program Manager On behalf of The Morey Corporation 100 Morey Drive Woodridge IL, 60517 The Morey Corporation | 630.754.2300 | 100 Morey Drive, Woodridge, IL 60517 www.moreycorp.com