app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2023-06-20
|
1 2 3 4 5 6 7 8 9
|
2023-05-30
|
1 2 3 4 5 6 7 8 9
|
2023-05-29
|
1 2 3 4 5 6 7 8 9
|
2022-12-16
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Motocaddy Ltd.
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0026604934
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury
|
1 2 3 4 5 6 7 8 9
|
Units 15 to 18, Stansted Distribution Centre
|
1 2 3 4 5 6 7 8 9
|
Hertfordshire, N/A CM22 7DG
|
1 2 3 4 5 6 7 8 9
|
Hertfordshire, N/A
|
1 2 3 4 5 6 7 8 9
|
United Kingdom
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
U******@SGS.COM
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8 9
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
2AMH4
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
SC20A
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8 9
|
Name |
I******** G******
|
1 2 3 4 5 6 7 8 9
|
Title |
Engineering and Technology Director
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+4412********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
+4412********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
i******@motocaddy.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
1 2 3 4 5 6 7 8 9
|
Name |
P******** Z********
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
1 2 3 4 5 6 7 8 9
|
ShangHai, 201612
|
1 2 3 4 5 6 7 8 9
|
China
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+8621********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
02161********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
P******@sgs.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
1 2 3 4 5 6 7 8 9
|
Name |
P****** Z****
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
1 2 3 4 5 6 7 8 9
|
ShangHai, 201612
|
1 2 3 4 5 6 7 8 9
|
China
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+8621********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
02161********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
P******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | No |
1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 9 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 9 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 9 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 9 | PCB - PCS Licensed Transmitter |
1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Golf Trolley |
1 2 3 4 5 6 7 8 9 | LTE Module |
1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 8 9 | Single Modular Approval |
1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change |
1 2 3 4 5 6 7 8 9 | Change in Identification |
1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 9 | Grant Comments | C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.03 W/kg and 1.15W/kg respectively.
C2PC to add new antenna (Type: FPC antenna, Gain: 2.2dBi).
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.01 W/kg and 1.13W/kg respectively.
C2PC to added new antenna (Type: FPC antenna, Gain: 2.2dBi).
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.03 W/kg and 1.15W/kg respectively.
C2PC to add new antenna (Type: FPC antenna, Gain: 3.8dBi).
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | C2PC to add new antenna (Type: FPC antenna, Gain: 0.4 dBi at 700/800/850 MHz, 2.3 dBi at 1700/1900 MHz, and 2.0 dBi at 2500/2600 MHz).
Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
1 2 3 4 5 6 7 8 9 | C2PC to Added New Antenna (Type: FPC antenna, Gain: 3.8dBi).
Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
1 2 3 4 5 6 7 8 9
|
Name |
K******** Z****
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
13636********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
K******@sgs.com
|
|