all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
users manual | Users Manual | 1.99 MiB | / October 08 2007 | |||
1 2 | Test Report | |||||||
1 2 | External Photos | / October 08 2007 | ||||||
1 2 | Test Report | |||||||
1 2 | Internal Photos | / October 08 2007 | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Setup Photos | / October 08 2007 | ||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | / October 08 2007 |
1 2 | users manual | Users Manual | 1.99 MiB | / October 08 2007 |
Boost Mobile i425 iDEN Handset Users Guide DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product:
Product Name: i425 Model Number: H98XAH6JR2AN Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Getting Started Introduction Welcome to Boost Mobile With Boost Mobile you pay up front, stay in control of your monthly costs, and get all the mobile freedom you want. No contracts, no bills, no credit checks. Our phones have the latest features including Nationwide Boost Walkie-Talkie, Wireless Web, Instant Messaging, Text and Multi-Media Messaging and GPS technology. Make your phone all your own Boost Mobile offers the best in wireless entertainment services such as Boost Call Tones, Instant Messaging, and Boost loopt as well as the latest games, applications, real music ringtones, wallpapers and more. Two easy ways to purchase content and get information on the latest services:
From your handset: boostLIVE from the Main Menu On the web: Check out www.boostmobile.com Purchases are deducted from your Boost Mobile account. No credit card needed. Re-BoostTM You can recharge your account directly from your handset using the Re-Boost menu option. On your phone, launch the service from the Main Menu. You will then be able to log on and recharge your account using your credit card or Re-Boost Card. You can also view Getting Started 1 Important: Before using your phone please read the "Terms and Conditions of Service", "Driving Tips" and "Safety and General Information". your account balance and call credit expiration date. The account pass code is the same one that you use to access your account. Instant Re-BoostTM You can recharge instantly by dialing the letters A-D-D (2-3-3) from your mobile phone and press Send. You are not required to enter your personal telephone number (PTN) or passcode. If you select Prepaid Card, you will be asked to enter the 14-digit card number printed on the Re-Boost Card. If youve selected credit card, you will be asked simply to confirm your purchase. You will need to have a credit card already on file to use it for purchasing airtime. Call 1-888-BOOST-4U to have your credit card added to your account. Boost Customer Care 1-888-BOOST-4U (1-888-266-7848) or dial 6-1-1 from your i425 phone. 2 Getting Started l S U Z Main Menu T c R X More Exit Volume Keys Left Soft Key Perform function in lower left display. Menu Key From home screen, open main menu. Talk Key Make &
answer calls. Boost Logo Flash Light Notifies when there is voicemail Right Soft Key Perform function in lower right display. Browser Key Launches boostLIVE. Power/Home/End Key Turns On the phone, ends calls, exits menus system. OK Key In menus & lists, press to select highlighted option. 4-Way Navigation Key Speaker ON/OFF Key 3 Home Screen Main Menu 2 key Press the to open the Settings screen 3 l S U Z Main Menu T c R X More Exit Press the Navigation Key up, down, left or right to highlight a menu feature.
) 1 Press and hold the for a Power Key few seconds, or until the screen lights up, to turn on your phone. 4 Press the to select. key 4 Motorola, Inc., 2007. Manual Number NNTN7302A Software Version: A7F.00.00 CP Version: 69.00.00 USR Version: U8BA.27.03 Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 ww.hellomoto.com 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Product Support:
www.motorola.com/iden/support Certain mobile phone features are dependent on the capabilities and settings of your service providers network. Additionally, certain features may not be activated by your service provider, and/
or the provider's network settings may limit the features functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. 5 Contents Getting Started . 1 Introduction . 1 Re-BoostTM . 1 Instant Re-BoostTM . 2 Boost Customer Care . 2 Menu Map. 8 Use and Care. 10 Essentials . 11 About this guide. 11 Battery. 12 SIM Card Installation 15 SIM Card Removal . 15 Turn it on & off. 15 Make a call. 16 Answer a call. 16 Store a phone number 16 Call a stored phone number . 16 Your phone number. 17 Main Attractions . 18 boostLIVE . 18 WT Services. 18 MMS . 23 Basics . 38 Display. 38 6 Contents Text entry . 39 Volume . 41 Navigation key . 41 Hands-free Speakerphone. 42 Codes & passwords . 42 Lock & unlock phone 42 Boost Mobile Services 43 Accessories. 43 Wireless local number portability: Bringing your phone number from another carrier . 43 Boost Customer Care 43
. 43 Customize . 44 Ringtones . 44 Time & date . 45 Hide or show location information. 46 Calls. 47 Turn off a call alert . 47 Recent calls. 47 Redial . 47 Return a call . 47 Caller ID. 48 Emergency calls. 48 International calls . 49 Speed dial . 50 Turbo dial. 50 Voice Mail . 50 Receiving a Message 50 Other Features. 51 Advanced calling . 51 Contacts. 51 Datebook . 52 GPS. 53 Airplane Mode . 54 Hands-free . 55 Messages . 55 Personalize . 56 Security . 56 Safety and General Information. 58 Motorola Limited Warranty for the United States and Canada . 65 Hearing Aid Compatibility . 70 Information From the World Health Organization. 72 California Perchlorate Label. 74 Privacy and Data Security . 75 Smart Practices While Driving . 76 Index. 78 Contents 7 Menu Map
[Create Message]
Y Messages Voice Mail Inbox Drafts Sent Items Net Alert SMS g Voice Notes
[New VoiceRec]
f Profiles
[New Profile]
Standard Car At Work/In Class At Concert On a Date Using Headset Rec WT Only Rec Cntcs Only U boostLIVE a Memo h Shortcuts
[New Entry]
Shortcuts Cntcs[New Contact]
Recent Calls Contacts Re-Boost Messages VoiceRecord Web Ring Tones Main Menu l Re-Boost Q WT Service Send Event Send My Info Send Contact Configure S Web Z Games & Apps. T Ringtones Buy Tones Ring All: On/Off Ringers Vibrate Silent c Recent Calls R Settings X My Info
(see next page) Line 1 My Name Walkie-Talkie #
Group ID Carrier IP IP1 Address IP2 Address Circuit Data
[New Event]
[New Contact]
b Datebook j My Pictures e Contacts 8 V Call Timers Last Call Phone Reset Phone Lifetime WT Reset WT Lifetime Circuit Reset Circuit Lifetime Kbytes Reset i GPS Position Privacy Interface W Call Alert d Call Forward Forward To: On/Off This is the standard Main Menu layout. Your phones menu may be a little different. Settings Menu Display/Info Wallpaper Text Size Theme Home Icons Backlight Backlight Java Timer Logo Flash: On/Off WT Backlight: On/Off Phone Calls Clock Menu View Contrast Language Large Dialing Any Key Ans Auto Redial Call Waiting Auto Ans Minute Beep Call Duration Notifications DTMF Dialing Prefix TTY WT Options Tkgrp Silent: On/Off Tkgrp Area One Touch WT Alert Type On/Off WT Features Pictures Events Store Received Info WT Backlight: On/Off Personalize Menu Options Up Key Down Key Left Key Right Key Center Key Left Softkey Right Softkey Power Up Line 1 Messages Earpiece Speaker Keypad Data Java Earpiece Java Speaker Volume Security Advanced Phone Lock Keypad Lock SIM PIN GPS PIN Change Passwords Alert Timeout Headset/Spkr Connectivity Reset Defaults Return to Home Baud Rate Transmitters: On/Off 9 Use and Care Use and Care To care for your Motorola phone, please keep it away from:
liquids of any kind Dont expose your phone to water, rain, extreme humidity, sweat, or other moisture. extreme heat or cold Avoid temperatures below -10C/14F or above 45C/113F. microwaves Dont try to dry your phone in a microwave oven. dust and dirt Dont expose your phone to dust, dirt, sand, food, or other inappropriate materials. cleaning solutions To clean your phone, use only a dry soft cloth. Dont use alcohol or other cleaning solutions. the ground Dont drop your phone. 10 Use and Care Essentials CAUTION: Before using the phone for the first time, read the Important Safety and Legal Information included in the gray-edged pages at the back of this guide. 032257o About this guide This guide shows how to locate a menu feature as follows:
Find it: M > Settings. This means that, from the home screen:
Press the Menu Button M to open 1 the Main Menu. 2 Press the navigation key to scroll to Settings, and press the center key O to select it. symbols This means a feature is network/subscription dependent and may not be available in all areas. Contact your service provider for more information. This means a feature requires an optional accessory. SIM Card Installation Caution: Dont bend or scratch your SIM card. Keep it away from static electricity, water, and dirt. Your Subscriber Identity Module (SIM) card contains personal information like Essentials 11 2 your phone number and phonebook entries. Turn off your phone and remove your battery before you install or remove a SIM card. 1 Carefully slide the SIM card into your phone, until it lies flat in the SIM card holder. SIM Card Removal Warning: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 12 Essentials Battery Battery Use & Battery Safety Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-
Motorola batteries and/or chargers. Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard. Battery usage by children should be supervised. Important: Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:
Remove the battery and inspect it to confirm that it bears a Motorola Original Equipment hologram;
If there is no hologram, the battery is not a qualified battery;
If there is a hologram, replace the battery and retry charging it;
If the message remains, contact a Motorola Authorized Service Center. New batteries or batteries stored for a long time may take more time to charge. Charging precautions: When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0C (32F) Essentials 13 using. Do not attempt to dry it with an appliance or heat source, such as a hair dryer or microwave oven. Use care when handling a charged batteryparticularly when placing it inside a pocket, purse, or other container with metal objects. Contact with metal objects (e.g., jewelry, keys, beaded chains) could complete an electrical circuit (short circuit), causing the battery to become very hot, which could cause damage or injury. Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center for proper battery disposal. Warning: Never dispose of batteries in a fire because they may explode. or above 45C (113F) when charging. Always take your mobile device with you when you leave your vehicle When storing your battery, keep it in a cool, dry place. It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times. Avoid damage to battery and mobile device. Do not disassemble, open, crush, bend, deform, puncture, shred, or submerge the battery or mobile device. Avoid dropping the battery or mobile device, especially on a hard surface. If your battery or mobile device has been subjected to such damage, take it to a Motorola Authorized Service Center before 14 Essentials Battery charging New batteries are not fully charged. Plug the battery charger into your phone and an electrical outlet. Your phone might take several seconds to start charging the battery. To charge using the charger:
1 Insert the charger into the USB connector on your phone as shown. Plug the other end of the charger into the appropriate electrical outlet. 2 Battery installation 1 Remove battery cover. 2 Insert battery as shown below. Push the battery down until it snaps in place. 3 Replace the battery cover. 3 When your phone displays Charge Complete, remove the charger. Essentials 15 correct software drivers installed on your computer. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately. Turn it on & off To turn on your phone, press and hold E for a few seconds or until the display turns on. To turn off your phone, press and hold E for two seconds. Make a call Enter a phone number and press S to make a call. To hang up press E. When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging. Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging. Of course, unplugging the charger from the wall will avoid current drain. To charge from your computer:
You can charge your phones battery by connecting a cable from your phones mini-USB port to a highpower USB connector on a computer (not a low-
power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer. Both your phone and your computer must be turned on, and you must have 16 Essentials Answer a call When your phone rings and/or vibrates press S to answer. To hang up press E. Store a phone number You can store a phone number in Contacts:
1 Press M > e > O > [New Contact]. Enter a name for the new entry and press O. Each entrys name can contain up to 20 characters. Select a specific Ringtone and press O. Select a type for the entry (Mobile, Walkie-Talkie, Work1, Work2, Home, Email, Fax, Pager, Talkgroup, IP or Other) and press O. 2 3 4 5 Enter the number for the entry and press O. Press Done to save the entry. 6 Tip: You can scroll left or right to store and view other information for the entry. You can choose a special ringer, store an Email address, assign a Group, and more. After you have saved the number, the new Contacts entry is displayed. Call a stored phone number Find it: M > e > O 1 Scroll to the Contacts entry. Shortcut: In Contacts, press keypad keys to enter the first letter of the entry you want. Press S to call the entry. 2 Essentials 17 Your phone number Find it: M > e > O Tip: Want to see your phone number while youre on a call? Press M > X >
O. 18 Essentials Main Attractions boostLIVE Your i425 comes with a dedicated browser key that takes you directly to boostLIVE web site from the keypad. More Exit WT Services Your phone can send and receive the following items through Walkie-Talkie calls with other phones that have this capability:
Events from the Datebook My Info Contacts Pictures*
*Additional charges may apply. You can choose to send Events, My Info, Pictures or Contacts to any Walkie-
Talkie number on the recent calls list, or Walkie-Talkie numbers stored in Contacts. When you make or receive a Walkie-
Talkie call, your phone automatically determines whether the Walkie-Talkie You can download ringtones, wallpapers and java applications over the air. 18 Main Attractions recipient is able to receive each of these items. Your phone saves this information for as long as the Walkie-
Talkie number is on your recent calls list or is saved in your Contacts. Your phone updates the saved information each time you make or receive a call to or from that Walkie-Talkie number. You can turn your phones ability to send and receive events from the datebook or pictures on and off. Find it: M > R > WT Options > On/Off WT Features. 1 2 My Info and Contact information are set to ON by default and they cannot be turned off. Select Pictures and or Events. Press - under Done. Send Events To send an event from the Datebook:
Find it: M > b 1 2 3 Find the event you want to send. Press M > Send via WT. Select a contact from the Contacts list or Recent Calls. Press the WT button to send. 4 The event will be sent to the person you called. Send My Info To send My Info from the Contacts list:
1 2 3 Press - under Contcs. Scroll to any contact and press M. Select WT Send My Info and press
- under Browse. Select a contact from Recent Calls, Contacts list or Memo. Press the WT button to send. 5 Your contact information will be sent to the person you called. 4 Main Attractions 19 Send Contacts To send contacts from the Contacts list:
1 2 3 4 Press - under Contcs. Scroll to any contact and press M. Select Transfer > Send Via PTT. Select a contact from Recent Calls, Contacts list or Memo. Press the WT button to send. 5 Send a Picture When you send a picture, it appears on the Walkie-Talkie call recipients display. If the recipient accepts the picture, their phone saves the picture. The picture then appears in that phones recent call list and in My Pictures. 20 Main Attractions Send a picture during a Walkie-
Talkie call Note: You cannot make or receive calls while transmitting a picture. Find it: M > Use WT Feature > Send Picture When prompted, press the WT button to resume the call. Note: The first time you send a stored picture after turning the phone on, you will see the following message: Picture Fees May Apply. Continue?
Start a call by sending a picture You can start a call by choosing a picture:
From My Pictures:
1 2 Press M > WT Send. Select A Contact or A Recent Call. A list of Contacts that have Walkie-
Talkie numbers and are able to receive pictures appear in each case. Select the name of the person you want to send the picture to. Press the WT button to send the picture. 3 4 5 Wait while the picture is transmitted. The Walkie-Talkie call is temporarily interrupted while a picture is transmitted. 6 When prompted, press the WT button to resume the Walkie-Talkie call. Receive a picture When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture. Pictures you receive are saved to your phones memory and they are accessible through My Pictures. When you see a message asking if you want to accept the picture, press Yes to accept or No to decline. Tip: To stop the transmission before it is finished, press O. Note: The first time you accept a stored picture after turning the phone on, the following message appears:
Messaging Fees May Apply. Continue?
and you are prompted to respond. Press Yes to accept the picture. Press No to decline the picture. Delete a picture from the display If you want to remove a picture from your phones display while still on a call, press M > Clear Screen. The picture will not appear on the display again the next time you receive a call from person who sent it. This does not delete the picture from your phone. Main Attractions 21 Set one touch WT One Touch WT sets your phone to do any of the following each time you press the WT button:
Call the most recent Walkie-
Talkie number or Group on the recent calls list Call a Walkie-Talkie number you assign Go to Quick WT Go to WT Manager Go to the first screen to send a message, Picture, My Info, or a Contact information during a call Set one touch WT to call recent calls Find it: M > R > WT Options > One Touch WT > Last Call. 22 Main Attractions Set one touch WT to call assigned IDs Find it: M > R > WT Options > One Touch WT > Assigned No. To enter the Walkie-Talkie number you want your phone to call every time you press the WT button:
1 Enter the number using your keypad or press Search > Contacts, Recent Calls, or Memo > select the number you want to enter. Press O. 2 Turn off one touch WT Find it: M > R > WT Options > One Touch WT > Off. Set My Info sending option You can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it. The information your phone sends always includes My Name and Walkie-
Talkie. You may also send Line 1, Carrier IP, and Circuit Data, depending on your sending options. To change the fields you send:
Find it: M > X > M > WT Send Setup
> Info To Send. 1 Add or remove the checkmarks. 2 Press Done. Automatic sending To control whether you send your information automatically:
Find it: M > X > M > WT Send Setup
> Auto Send. 1 When you make a call in which your information is sent automatically, the name you entered in the My Name field of My Info appears on the display of the recipients phone, even if your name Select On or Off. and Walkie-Talkie number are not stored in the recipients Contacts. MMS Multi-Media Messaging Service
(MMS) lets you send and receive messages that may include text, pictures and audio recordings. Create a message To begin creating a message from the idle screen press - under Mesg. or press M >Y> [Create Mesg]. To address the message:
1 2 Add the phone number or email Select To address. or 3 4 Select from Contacts or Recent Calls. Press > O. Main Attractions 23 Tip: To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press - under Remove. When you are finished addressing the message, press - under Back. To enter or edit the body of the message:
1 2 Select Message. Enter text or use a Quick Note and press O. Press Send. 3 More message options View more message fields in a message you are creating, select More. To create or edit the subject line, select Subject. 1 Enter text and press O. or Select Quick Note > O. 2 24 Main Attractions You can insert a list of replies the recipient can choose from when replying to your message by selecting Auto Replies and entering several text choices. To set the priority of the message, select Priority and select the priority you need. To receive a report confirming your message delivery, select Report > On Delivery. To set a date after which attempts to deliver the message end, select Valid Until. 1 Select a date by scrolling or entering numbers. or Select No Date > O. Press Send or M > Send. 2 3 Reply to a message You can reply to a message while you are viewing it, or while a previously viewed message is highlighted in the message center. You cannot reply to unread messages. To reply to a message:
1 View the message you want to reply to. To reply to the sender only, press Reply or if you wish to include all the people copied in the message, press Reply All . 2 3 A list of short phrases appears. Select any of these phrases to add it to your messages or select
[Create Reply]. Edit any message fields you want to change. Send the message. 4 5 Quick notes When you are filling in the Message and Subject message fields, you can add ready-made words or short phrases called Quick Notes. After you add these words or phrases, you can edit them as you would any other text. 1 While you are creating a message, scroll to or select Message or Subject. Press QNotes or M > Insert QuickNotes. Select the Quick Note you want to insert into the message. 2 3 Attach a picture and audio recording or a ringtone You can attach one or more pictures audio recordings or ringtones from your phone into the body of the message. You can include text in the body of your message in addition to these items. Attach items While you are filling in the Attach field, press [New] > My Pictures, VoiceRecord or Ringtones. Main Attractions 25 The voice record is attached to the message and saved to the list of voice records. Remove an attachment To remove an attachment in a message you are creating:
1 Select Attach. Scroll to the attachment you want to 2 remove. Press M. Select Unattach. 3 4 Drafts While you are creating a message, you can save it in the MMS drafts folder before you send it. You can view, edit, send, or delete saved drafts. A list of available pictures, audio recordings and ringtones appears. Select the picture, voice record or ringtone you want to attach. Tip: To view or listen to the item before attaching it, highlight it and press View or Play. Create a new voice record You can create a new voice record to send with a message:
1 2 Press M or select Attach > [New]. Select VoiceRecord > [New VoiceRec]. Say the message you want to record into the microphone. 3 4 When you are finished recording, press O. 5 When you are finished, press -
under Back and - under Done. 26 Main Attractions Save a message in the MMS drafts folder From the Message center press M >
Save. You can continue to create the message. The version you saved in the MMS drafts folder will not change. Send a draft Find it: M > Y > Drafts. 1 2 Select the draft you want to send. Press M > Send. Edit a draft Find it: M > Y > Drafts. 1 2 Select the draft you want to edit. Press O. Delete a draft When you send a draft, it is removed from the MMS drafts folder. To delete a message in the MMS drafts folder without sending it, scroll to the message you want to delete and press
- under Delete and - under Yes. MMS outbox MMS messages you have sent or tried to send are stored in the MMS Outbox. Forward items from the outbox Find it: M > Y > Sent Items. 1 Scroll to the message you want to forward. Press M. Select Forward. Edit and send your message. 2 3 4 Resend If a message was not sent from your handset, you can resend it. Find it: M > Y > Sent Items. Main Attractions 27 1 Scroll to the message you want to resend. Press Resend. 2 Note: If your message was sent successfully, Resend will not appear as an option. Check delivery status If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status:
Find it: M > Y > Sent Items. 1 Scroll to the message you want to view. Press M. Select Delivery Status. 2 3 Delete a message 1 Scroll to the message you want to delete. Press - under Delete, or 2 28 Main Attractions 3 4 5 Pres M > Delete Multiple. Select the message or messages you want to delete Press - under Delete to confirm. Receive a message When you receive an MMS message, a message notification appears on the display. To view the message:
1 2 Press O. If the message fills more than one screen, use the navigation key to scroll down and read the remaining text. Message Notifications When you receive a message, your phone notifies you with text on the display, a notification tone or vibration, and by flashing the Boost logo backlight slowly. You can access the message or dismiss the notification. If you dismiss the notification, the message is not deleted. It can be accessed through the message center. If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message or dismiss the alert. If you are on a call when you receive a message, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options. Setting Notification Options To control whether your phone sounds message notification tones while you are on phone calls:
Find it: M > R > Phone Calls >
Notifications. 1 Select the option you want:
Receive All Tones sound during calls for all types of messages. Message Mail Only Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls. Delay All Tones for all types of messages are held until you end calls. Note: Delay All is the default setting. Tip: To set notification options during a call press M > In Call Setup >
Notifications Embedded objects and attachments Messages may contain pictures or audio recordings as part of the body of the message or as attachments. Main Attractions 29 If a message contains pictures or audio recordings in the body of the message, highlight each picture or audio recording to view or play it. If a message contains a picture or audio recording as an attachment, open the attachment to view the picture or play the audio recording. Open attachments 1 View the message. 2 Highlight the attachment you want to open. Attachments appear at the end of a message. Press O. 3 Note: Attachments that are of an unknown type cannot be opened, but they can be deleted. View received messages from the message center 1 Press M > Y > Inbox. 30 Main Attractions Select the message. 2 If the message has not yet been downloaded from the message server, it is downloaded now. Delete unread messages 1 Scroll to the message you want to delete. Press Delete. Press Yes to confirm. 2 3 Forward a message Press M > Forward. 1 Create and send your message. 2 Embedded objects and attachments are included when you forward a message. Lock and unlock messages Locked messages cannot be deleted until you unlock them. 1 2 3 View the message you want to lock or unlock. Press M. Select Lock Message or Unlock Message. Call a number in a message If a message you receive contains a phone number, Walkie-Talkie number, or Talkgroup ID in the From field, the To field, the Cc field, the subject line, or the body of the message, you can call or send a call alert to that number. View the message. Send a call alert 1 2 Highlight the Walkie-Talkie number or Talkgroup ID you want to alert. Press M. Select Alert. Press the WT button. 3 4 5 Make a group call View the message. 1 Press M. 2 3 Highlight the Talkgroup ID you want to call. Select Talkgroup. Press the WT button. 4 5 Store message information to contacts If a message you receive contains a phone number, Walkie-Talkie number, Talkgroup ID, or an email address in the From field, the To field, the Cc field, the subject line, or the body of the message, you can store this information to Contacts. 1 View the message. 2 Highlight the number or email address you want to save. Press M. 3 Main Attractions 31 Note: The entire URL must appear in the message to allow you to open the website. View the message. Save an embedded picture or audio recording To save a picture or audio recording that is part of the body of a message you receive:
1 2 Highlight the picture or audio recording you want to save. Press M. 3 4 Select Save Picture or Save Audio. The item will save in the default storage location. Note: Some types of pictures and audio recordings can be viewed or played, but not saved. 4 5 Select Save Number or Save Email. To store the number or email address as a new entry, select [New Contact]. To store the number or email address to an existing entry, select the entry. 6 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number or email address. Press Save. Go to a website If a message contains one or more website URLs, you can go to that website. 1 2 Highlight the website URL you want View the message. to go to. Press M. Select Go To Website. 32 Main Attractions 7 3 4 Delete an embedded picture or audio recording To delete a picture or audio recording that is part of the body of a message you receive:
1 2 Highlight the picture or audio recording you want to delete. Press M. Select Delete Picture or Delete Audio. View the message. 3 4 Note: You may save or delete pictures and audio recordings from slide shows individually as you view or listen to them. Save attachments 1 View the message. 2 Highlight the attachment you want to save. Press M. 3 Select Save Attachment. 4 Selected items save to the default storage location. Note: Some types of pictures and audio recordings can be viewed or played, but not saved. Delete attachments 1 View the message. 2 Highlight the attachment you want to delete. Press M. Select Delete Attachment. Press Yes to confirm. Save a picture 1 2 When the picture you want to save View the slide show. appears, press M. Select Save Picture. 3 4 5 3 Main Attractions 33 Save audio 1 2 3 4 View the slide show. Press M. Select Save Audio. If the slide show contains more than one audio recording, a list of the audio recordings appears. Select the audio recording you want to save. Delete a slide show 1 Highlight the slide show or view the slide show. Press M. Select Delete Slideshow. 2 3 Message transmission After you start to send a message you have created or start to download a message you have been sent, you can still stop the message transmission from 34 Main Attractions being completed by pressing the soft key -. Customize MMS The MMS Setup menu lets you customize MMS for your handset:
Friendly Name Enter text here to create a friendly name. Your friendly name is the name displayed in the From field on other iDEN handsets when they receive messages from you. Signature Enter text here to create a signature. Your signature is text that is automatically inserted at the end of all messages you create. You can edit the text before sending the message. Quick Notes Lets you create new Quick Notes and edit or delete Quick Notes you have created. Replies Lets you create new reply phrases and edit or delete reply phrases you have created. Cleanup Controls how long messages remain in the Inbox and Outbox before they are deleted. Downloads Controls whether your phone automatically downloads new messages when they arrive, or only after you respond to a prompt or read the message from the Inbox. Set this option to Automatic if you want your phone to download new messages automatically; set the option to Manual if you want your phone to prompt you before downloading new messages. Memory Size Shows the total amount of Used, Free and total Capacity of the phones memory. To access the MMS Setup menu:
Find it: M > Y > M > Setup Tip: This option is available from many context-sensitive menus when you are using MMS. 2 New quick notes and reply phrases To create quick notes:
1 From the MMS Setup menu, select Quick Notes or Replies. Select [New Quick Note] or [New Reply]. Enter text from the keypad. Press O. 3 4 To edit quick notes:
You can edit only Quick Notes and reply phrases you have created. 1 From the MMS Setup menu, select Quick Notes or Replies. Select the Quick Note or reply phrase you want to edit. Edit the text. Press O. 3 4 To delete only Quick Notes and reply phrases you have created:
2 Main Attractions 35 1 2 From the MMS Setup menu, select Quick Notes or Replies. Scroll to the Quick Note or reply phrase you want to delete. Press Delete. Press Yes to confirm. 3 4 To delete all Quick Notes or all reply phrases you have created:
1 From the MMS Setup menu, select Quick Notes or Replies. Press M. Select Delete All. Press Yes to confirm. 2 3 4 Set the clean-up option The clean-up option controls how long messages remain in the Inbox and Outbox before they are deleted. You set the clean-up option for the Inbox and Outbox separately. 36 Main Attractions The clean-up option deletes only read, unlocked messages. Clean-up options Off Messages are never automatically deleted. 5 Messages If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left. 10 Messages If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left. With these options, messages are deleted in the order they were received, starting with the oldest, until the selected number are left. 1 Day Messages are deleted if they are older than 1 day. 3 Days Messages are deleted if they are older than 3 days. With these options, messages are deleted when you exit the message center after setting the option. Custom Lets you create a clean-up option of up to 99 messages or 99 days. for the inbox 1 From the MMS Setup menu, select Cleanup > Inbox. Choose a clean-up option. To automatically delete messages now, press Yes or press No to delete messages later. 2 3 From the Outbox 1 2 3 From the MMS Setup menu, select Cleanup > Sent Items. Choose a clean-up option. To automatically delete messages now, press Yes or No to delete messages later. Press M > Messages. Delete all messages To delete all unlocked messages from the MMS Inbox, all messages in the MMS drafts folder, or all successfully sent messages in the MMS Outbox:
1 2 Go to the MMS Inbox, the MMS drafts folder, or the MMS outbox. Press M. Select Delete All. Press Yes to confirm. 3 4 5 Main Attractions 37 Basics See page 3 for a basic phone diagram. Display The home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and S. Note: Your home screen may look different. Left Soft Key Label Time &
Date Right Soft Key Label Soft key labels show the current soft key functions. For soft key - locations, see page 3. 3 38 Basics Status indicators Status indicators can show at the top of the home screen:
1. 2. 3. 4. 5. 6. 7. More Exit 1 Signal Strength Indicator Vertical bars show the strength of the network connection. You cant make or receive calls when 1 or 0 shows. 2 Active Phone Line 1 indicates phone line 1 is ready to make calls. Speaker Off Sounds associated with Walkie-Talkie calls and group calls are set to come through the earpiece rather than through the speaker. Ringer Off Your phone is set to not ring. 4 5 Message Indicator Shows 6 when you receive a text message. Packet Data Your handset is ready to transfer or is transferring packet data. 7 Battery Charge Indicator A fuller battery indicates a greater charge. Recharge the battery when your phone shows Low Battery. Text entry Some features let you enter text. Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when SMS text messaging). To change the character input mode:
1 When you display a screen where you can enter text, press M to change the character input mode. Select one of the following options:
2 entry modes Alpha Word Symbols Numeric Press a key several times for each character. Enter words using a predictive text entering system that lets you enter a word with fewer keypresses. Enter symbols. Enter numbers by pressing the numbers on the keypad. Tip: When entering text, press # to change letter capitalization (Abc > ABC
> abc). Basics 39 Word mode Word English Text Input lets you enter text into your phone by pressing keys just once per letter. Word English Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word.
(The word may change as you type.) To enter a word using Word Character Input:
1 Select the Word character input mode. Press the corresponding keys once per letter to enter a word (for example, to enter the word Jeff, press 5 3 3 3). (If you make a mistake, press * to erase a single character. Press and hold * to delete an entire entry.) To accept a word and insert a space, press #. 2 3 40 Basics To accept a word completion (such as Jeffrey when you entered Jeff), press right. Alpha mode To enter characters by tapping the keypad:
1 2 Select the Alpha mode. Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word Jeff, press 5 once, 3 two times, 3 three times, and 3 three times again. If you make a mistake, press Delete to erase a single character. Press and hold Delete to erase an entire word.) By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key. Characters scroll in the following order:
characters 1
? ! , @ ' - _ : ; ( ) & " 1 0 ^ ` %
A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 P Q R S 7 T U V 8 W X Y Z 9
(no characters) Space Shift 2 3 4 5 6 7 8 9 0
Volume Press the volume keys to:
turn off an incoming call alert l S U Z Main Menu T c R X More Exit change the earpiece volume during calls change the ringer volume from the home screen Tip: Sometimes silence really is golden. Thats why you can quickly set your ringer to Vibrate All by holding the down volume key in the home screen. Navigation key Press the navigation key up, down, left, or right to scroll to items in the l S U Z Main Menu T c R X More Exit Basics 41 GPS PIN Enables and disables your phones GPS PIN security feature. Change Passwords Changes your phone unlock code, security code, SIM PIN, and GPS PIN. Lock & unlock phone Phone Lock Turns on a feature that locks your phone: Lock Now takes effect immediately; Auto Lock takes effect when your phone is powered off and then on. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code. Contact your service provider for your default unlock code. Keypad Lock Locks the phones keypad, either immediately or display. When you scroll to something, press O. Hands-free Speakerphone You can use your phones hands-free speaker to make calls without holding the phone to your ear. During a call press the speaker ON/OFF key to turn the hands-free speaker on. The hands-free speaker stays on until you press thespeaker ON/OFF key end the call. The next phone call will redirect the audio back to the earpiece. or Codes & passwords The Security menu lets you turn security features on and off and change passwords:
SIM PIN Enables and disables your phones SIM PIN security feature. 42 Basics automatically after a set period of inactivity. lock keypad You can lock your phones external keys to prevent accidental key presses. To lock the external keys automatically after a specified time:
Find it: O > Security > Keypad Lock >
Auto Lock. Tip: You can lock the keypad inmediately by pressing M and *. airplane mode Note: Consult airline staff about the use of Airplane Mode during flight. Turn off your phone whenever instructed to do so by airline staff. Airplane mode turns off your phones calling features in situations where wireless phone use is prohibited. You can use the phones other non-calling features when Airplane Mode is turned on. Find it: O > Advanced > Transmitters 1 Select Off to turn on airplane mode. Basics 43 Boost Mobile Services Accessories Your phone comes with a BK60 Lithium Ion Battery and travel charger. Various accessories are available for use with your i425 phone, cases, vehicle power charger, data cables, hands-free accessories and more. To order additional accessories, go to boostmobile.com. You can also contact your Boost Authorized Dealer. For information on Boost retail store locations, go to boostmobile.com. Wireless local number portability: Bringing your phone number from another carrier Please contact Boost Customer Care for information about this service. Boost Customer Care 1-888-BOOST-4U (1-888-266-7848) or dial 6-1-1 from your i425 phone. Boost Mobile Services 43 Customize Ringtones To set the ringtone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via WT or Datebook reminders:
Note: Only ringtones stored in your phones memory are available in the ringtones list. Not all audio files can be assigned as ringtones. Find it: M > T. 1 Make sure Vibrate All is set to Off. Scroll through the list of ringtones 2 and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound;
Silent sets your phone to neither vibrate nor make a sound. 44 Customize Tip: Highlighting a ringtone lets you hear it. 3 Select the features you want to assign the ringtone to. 4 When you are finished, press Done. Note: This icon M appears on the display if you set your phone to neither vibrate nor make a sound for phone calls. Setting your phone to vibrate You can set your phone to vibrate instead of making a sound when you receive all phone calls, Walkie-Talkie calls, group calls, call alerts, messages notifications, pictures sent using Send via WT, and Datebook reminders. Find it: Press M > T > Vibrate All 1 Set this option to On or Locked. Setting this option to On lets you turn Vibrate All off by pressing the up volume control. Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off. Tip: To set Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set Vibrate All to On. Continue to hold the down volume control to set Vibrate All to Locked. To set your phone to vibrate instead of making a sound for some features but not others:
1 From the Main Menu, select Ringtones. 2 Make sure Vibrate All is set to Off. 3 Select Vibrate from the list of ringtones. 4 Select the features you want to set to make no sound. 5 When you are finished, press Done. wallpaper Set a photo or picture as a wallpaper
(background) image in your phones home screen or throughout all menu screens. Find it: O > Display/Info > Wallpaper. To select a wallpaper image:
1 Scroll through the list of pictures and press O to select the picture of your choice. Note: You can set the wallpaper to change automatically after a certain period of time by turning on the Auto Cycle feature located in the Wallpaper menu. Customize 45 Backlight Set the amount of time that the display, java apps., the Boost logo and the PTT button backlights remain on, or turn off backlights to extend battery life. Find it: O > Display/Info > Backlight Time & date To access Datebook set up options:
Find it: M > b > M > Setup. You can view or change these options:
Start View Sets Datebook to start in day view, week view, or month view when you access Datebook. Daily Begin Sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a 12-
hour day view. Delete After Sets the amount of time Datebook waits to delete an event after it occurs. 46 Customize Time Shift Lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone. Alert Timeout Sets the amount of time a tone continues to sound when you receive a Datebook reminder. Clock Controls whether the time and date appear on the home screen; sets time and date format. Hide or show location information Your phone is equipped with a Location feature for use in connection with location-based services that may be available in the future. The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911. Note: Turning Location on will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-
enhanced 911 is not available in all areas. To set your Privacy Options:
Find it: M > i > Privacy. 1 Select Restricted, Unrestricted, or Ask Access. Press O. 2 Customize 47 Calls To make and answer calls, see page 16. Turn off a call alert You can press the volume keys to turn off a call alert before answering the call. Recent calls The recent calls list contains information associated with calls you have made and received and call alerts you have received. When you send or receive Walkie-
Talkie calls, the recent call list contains the following WT items with those calls:
Contacts received My Info received Pictures sent or received The recent calls list displays up to 20 of the most recent calls and call alerts. 1 2 Tip: You can also access the Recent Calls list by pressing the navigation key Press M > c. Scroll through the list. down. Redial To redial your last outgoing call, press and hold N. voice commands You can place calls by speaking comands to your phone if you have previously assigned a voice name to your contacts. Calls 47 To assign voice names to contacs:
Press - under Contcs and select 1
[New Contact]. 2 Assing a name, phone number and 3 4 select [Options]. Select Voice Name and follow the propmt to record the voice name. Press - under Back and - under Done to save the entry. To place a call using voice command:
1 From the home screen press and hold the speaker key until you are prompted to say the voice name. The handset will automatically place the call. Return a call When an incoming call is not answered, the Missed Call log is displayed on your screen. 48 Calls To display the Missed Call entry from the notification screen:
Highlight the entry and press O. To dial the phone number, press Call (left softkey). To display a Missed Call entry from standby mode:
1 2 Press M > c. Scroll to the item containing the number you want to call. If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it. If you scroll to contact information from another phone, you can make a call to any of the numbers in the contact information. 3 To place the call now press S. Walkie-Talkie calls With Walkie-Talkie calls, you use your phone as a long-range, digital walkie-
talkie. 2 Make Walkie-Talkie calls:
1 From the home screen enter the Walkie-Talkie number you want to call, or if you have stored contacts with Walkie-Talkie numbers, browse your contacts list. Press and hold the WT button on the side of your phone. Begin talking after your phone emits a chirping sound. Release the WT button to listen. 3 A Boost Walkie-Talkie call ends automatically if there is no activity on the call for a few seconds. Tip: To let someone know you want to talk to them on a Walkie-Talkie call, press the soft key under Alert. Caller ID Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps. To block your phone number from being displayed for a specific outgoing call:
1 2 3 To permanently block your number, call Boost Customer Care. Press * 6 7. Enter the number you want to call. Press S. Emergency calls Your service provider programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted. Calls 49 Note: Emergency numbers vary by country. Your phones preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues. Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone. Dial 911 or your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call. When you make an emergency call, your phones GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations 50 Calls of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call. Note: Emergency calls cannot be placed while the keypad is locked. Note: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone. International calls Call Boost Customer Care to activate international dialing. Press and hold 0 to insert your local international access code (indicated by +). Then, press the keypad keys to dial the country code and phone number. Speed dial Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number. Receiving a Message When you receive a voice mail message, New VoiceMail Message appears on the display. To call your service providers voice mail system and listen to the message:
Press - under Call. To dismiss the message notification:
Press O, or - under Back. If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message. 1 2 3 From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call. Press #. Press S. Turbo dial From the idle screen, press and hold the Speed Dial number (1 through 9) assigned to the phone number you want to call. Voice Mail Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Calls 51 Other Features Advanced calling feature call waiting To accept the second call and put the active call on hold:
Press Yes. To accept the second call and end the active call:
Press S. Your phone rings with the second call for you to answer. Contacts feature voice name command To make a call with voice name command:
Press and hold the speaker phone key >
wait to see Say Name on the display
> say the name of the person you'd like to call. Other Features 51 feature edit/delete contact entry set ringer ID Display a Contacts entry:
Press O > select contact
> Edit > select content to be edited >
O > add and/or edit the desired information > O Display a Contacts entry:
Press O > select contact > Edit >
Ringer > O > select desired ringer/picture
> O > Back > Save Datebook feature create datebook events change datebook view add new datebook event see datebook event To create a new Datebook event:
Press M > b >
New. Press M > b >
Month View, Week View, or Day View. To add a new calendar event:
Press M > b >
[New Event]
To see a calendar event:
Press M > b >
left or right to day >
event > O up or down to 52 Other Features GPS To improve GPS performance:
Move away from other electrical or electronic devices Try to remain stationary. feature view approximate location feature make an emergency call Dial 9-1-1 to be connected to an emergency response center. If you are on an active call, you must end it before calling 9-1-1. set GPS privacy options To see where you currently are:
Press M > i >
Position Scroll to view the entire screen. To recalculate position:
press Refresh. This may take several minutes. To set the level of privacy for your GPS system:
Press M > i >
Privacy If your GPS PIN security feature is enabled, enter your GPS PIN and select the privacy option you want. Other Features 53 feature set GPS PIN security Press M > R >
Security > GPS PIN >
On or Off > Enter the current GPS PIN. Note: Your default GPS PIN is 0000. To change your GPS PIN:
Press M > R >
Security > Change Passwords > GPS PIN. Enter the current GPS PIN > O > enter the new 4- to 8-digit GPS PIN > O > re-enter the new 4- to 8-digit GPS PIN to confirm > O 54 Other Features Hands-free feature speaker-
phone auto answer When the call is active, press
- under Spkr Automatically answer calls when connected to a car kit or headset:
Press M > R >
Phone Calls > Auto Ans > select the amount of rings before answering Messages feature read messages reply to messages When you receive a text message, it will automatically appear on your phone's main display screen. To view the entire message press down. If the messages is urgent, the message icon blinks in your display. While the message is open:
Press Reply > type message > Send or Press - under Reply
> [Create Reply] or quick reply > Send Other Features 55 Security feature lock feature Press O > Security
> Phone Lock > Lock Now or Auto Lock Tip: To lock the keypad press M > *
Personalize feature language backlight time length Set menu language:
Press O > Display/
Info > Language Select how long the display screen and keypad are backlit:
Press O > Display/
Info > Backlight Show the Main Menu as graphic icons or a text-based list:
Press O > Display/
Info > Menu View clock display Press O > Display/
menu style Info > Clock 56 Other Features Important Safety and Legal Information 57 Safety and General Information Safety Information This section contains important information on the safe and efficient operation of your mobile device. Read this information before using your integrated multi-service portable radio.*
Exposure to Radio Frequency
(RF) Energy Your phone contains a transmiter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy. Portable Radio Product Operation and EME Exposure Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):
58 Safety Information United States Federal Communications Commission, Code of Federal Regulations;
47 CFR part 2 sub-part J. American National Standards Institute
(ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992. Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.*
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998. Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999. Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003. ANATEL, Brasil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the
The information provided in this document superseedes the general safety information in users guides published prior to May 1, 2006 radio frequency range between 9 kHz and 300 GHz." "Attachment to Resolution 303 from July 2, 2002."
Operational Precautions To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions :
Two-way radio operation Your radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen. Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Walkie-Talkie (WT) button. To receive calls, release the WT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance). When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches
(2.5 to 5 cm) away from the lips. Product Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. If you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio modeor if you hang your device from a lanyard around your neckkeep the device at least 2.5 centimeters (1 inch) from your body when transmitting. ALL MODELS WITH FCC ID IHDT56HH1 MEET THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Safety Information 59 Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for 60 Safety Information use at the ear is 1.35 W/kg and when tested on the body, as described in this user guide, is 1.41 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.)2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID IHDT56HH1. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. 1 In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 2 The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden. RF Energy Interference/Compatibility Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your handset may cause interference with other devices. Follow Instructions to Avoid Interference Problems Turn OFF your radio product where posted notices instruct you to do so. In an aricraft, turn off your radio product whenever instructed to do so by airline staff. If your radio product offers an airplane mode or similar feature, consult airline staff about using it in flight. Implantable Medical Devices If you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this radio product. Persons with implantable medical devices should observe the following precautions:
ALWAYS keep the phone more than 20 centimeters (8 inches) from the the implantable medical device when the phone is turned ON. DO NOT carry the phone in a breast pocket;
Use the ear opposite the implantable medical device to minimize the potential for interference. Turn OFF the phone inmediately if you have any reason to suspect that the interference is taking place. Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your wireless phone with your implantable medical device, consult your health care provider. Hearing Aids Some mobile devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives. Other Medical Devices and Health Care Facilities If you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or Safety Information 61 health care facilities that may be using equipment that is sensitive to external RF energy. Driving Precautions Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using your radio product while driving, please:
Give full attention to driving and to the road. Using a mobile device may be distracting. Discontinue a call if you cant concentrate on driving. Use handsfree operation, if available. Pull off the road and park before making or answering a call if driving conditions so require. Do not place a handset in the airbag deployment area. Responsible driving practices can be found in the Smart Practices While Driving section at the end of this guide and/or at the Motorola Web site:
www.motorola.com/callsmart. Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you cant concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. 62 Safety Information Operational Warnings Obey all posted signs when using mobile devices in public areas. Potentially Explosive Atmospheres Areas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders. When you are in such area, turn off your hanset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire. Batteries and Chargers Caution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the Battery Use and Battery Safety section in this users guide. Your battery, charger, or portable radio may contain symbols, defined as follows:
Symbol 032374o Definition Important safety information follows. Symbol 032376o 032375o Li Ion BATT 032378o Definition Do not dispose of your battery or mobile device in a fire. Your battery or mobile device may require recycling in accordance with local laws. Contact your local regulatory authorities for more information. Do not throw your battery or mobile device in the trash. Your mobile device contains an internal lithium ion battery. Do not let your battery, charger, or mobile device get wet. Listening at full volume to music or voice through a headset may damage your hearing. Choking Hazards Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children. Glass Parts Some parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center. Seizures/Blackouts Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature
(if available) on your mobile device. Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Safety Information 63 Caution About High Volume Usage Listening at full volume to music or voice through a headset may damage your hearing. Repetitive Motion When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician. Service & Repairs If you have questions or need assistance, were here to help. Go to www.motorola.com/iden/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired). 64 Safety Information Motorola Limited Warranty for the United States and Canada What Does this Warranty Cover?
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:
Products Covered Products as defined above. Accessories as defined above. Products or Accessories that are Repaired or Replaced. Length of Coverage One (1) year from the date of purchase by the first consumer purchaser of the product. One (1) year from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Safety Information 65 Length of Coverage Ninety (90) days from the date of purchase. Products Covered Software as defined above. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk). What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) 66 Safety Information other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage. Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Software NOT Embodied in Physical Media. Software that is not embodied in physical media
(e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service. How to Obtain Warranty Service or Other Information? To obtain service or information, please call:
Motorola iDEN Customer Services 1-800-453-0920 or 954-723-4910 TTY-877-483-2840 Or visit us online at http://www.motorola.com/iden/support You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR Safety Information 67 SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted. Patent and Software Provisions MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
68 Safety Information a.That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
b.That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and c.Should the Product or parts become, or in MOTOROLA'S opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. Safety Information 69 Hearing Aid Compatibility A number of Motorola phones have been tested for hearing aid compatibility. When some wireless phones are used with certain hearing aids, users may detect a noise which can interfere with the effectiveness of the hearing aid. Some hearing aids are more immune than others to this interference noise, and phones can also vary in the amount of interference noise they may generate. ANSI standard C63.19 was developed to provide a standardized means of measuring both mobile phone and hearing aids to determine usability rating categories for both. Ratings have been developed for mobile phones to assist hearing aid users find phones that may be compatible with their hearing aid. Not all phones have been rated for compatibility with hearing aids. Phones that have been rated have a label with the rating(s) located on the box, and at www.motorola.com/iden. These ratings are not guarantees of compatibility. Results will vary depending on the user's hearing aid and individual type and degree of hearing loss. If a hearing aid is particularly vulnerable to interference, even a phone with a higher rating may still cause unacceptable noise levels in the hearing aid Trying out the phone with your hearing aid is the best way to evaluate it for your personal needs. 70 Safety Information M Rating: Phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing aids than unrated phones. (M4 is the better or higher of the two ratings.) On those models with an extendable antenna, this rating is determined only with the antenna extended. T Rating: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aid's telecoil (T Switch or Telephone Switch) than unrated phones. (T4 is the better or higher of the two ratings.) On those models with a telecoil mode setting, this rating is determined only with the phone so set. For setting instructions, see Features for the Hearing Impaired in the section entitled Advanced Calling Features. Note that not all hearing aids have telecoils in them. Hearing aids may also be measured for immunity to interference from wireless phones and may have ratings similar to wireless phones. Ask your hearing healthcare professional for the rating of your hearing aid. Add the rating of your hearing aid and your phone to determine the estimated usability:
Any combined rating equal to or greater than six offers excellent use. Any combined rating equal to five is considered normal use. Any combined rating equal to four is considered usable. Thus, if you use an M3 phone with a M3 hearing aid you will have a combined rating of six for excellent use. This methodology applies equally for T ratings. More information about hearing aid compatibility may be found at:
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and www.hearingloss.org/learn/cellphonetech.asp Safety Information 71 Information From the World Health Organization WHO InformationPresent scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your childrens RF exposure by limiting the length of calls or by using Product Registration RegistrationOnline Product Registration:
http://direct.motorola.com/hellomoto/
Motosupport/source/registration.asp Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. Export Law Assurances Export LawThis product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the 72 WHO Information hands-free devices to keep mobile phones away from your head and body. Source: WHO Fact Sheet 193 Further information: http://www.who.int./peh-emf residents only and is not required for warranty coverage. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status. Thank you for choosing a Motorola product. U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. Wireless: The New Recyclable RecyclingYour wireless mobile device can be recycled. Recycling your mobile device reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products. The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their mobile devices and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices. As a mobile device user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this mobile device up or trade it in for a new one, please remember that the mobile device, the charger, and many of its accessories can be recycled. It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, please visit us at:
http://recycling.motorola.young-america.com/
index.html Recycling 73 California Perchlorate Label Perchlorate Label Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no special handling required by consumer. 74 Perchlorate Label Privacy and Data Security Privacy and Data Security Motorola understands that privacy and data security are important to everyone. Because some features of your mobile device may affect your privacy or data security, please follow these recommendations to enhance protection of your information:
Monitor accessKeep your mobile device with you and do not leave it where others may have unmonitored access. Lock your devices keypad where this feature is available. Keep software up to dateIf Motorola or a software/application vendor releases a patch or software fix for your mobile device which updates the devices security, install it as soon as possible. Erase before recyclingDelete personal information or data from your mobile device prior to disposing of it or turning it in for recycling. For step-by-step instructions on how to delete all personal information from your device, see the section entitled master clear or delete data in this users guide. Note: Note: For information on backing up your mobile device data before erasing it, go to www.motorola.com and then navigate to the downloads section of the consumer Web page for Motorola Backup or Motorola Phone Tools. Understanding AGPSIn order to comply with emergency caller location requirements of the FCC, certain Motorola mobile devices incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a users locationfor example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications. If you have further questions regarding how use of your mobile device may impact your privacy or data security, please contact Motorola at privacy@motorola.com, or contact your service provider. Privacy and Data Security 75 Smart Practices While Driving Driving Safety Drive Safe, Call Smart SM Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Go to www.motorola.com/callsmart for more information. Your mobile device lets you communicate by voice and dataalmost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your mobile device while driving, remember the following tips:
Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. When available, use a hands-free device. If possible, add an additional layer of convenience to your mobile device with one of the many Motorola Original hands-free accessories available today. Position your mobile device within easy reach. Be able to access your mobile device without removing your eyes from the road. If you receive an incoming call at 76 Driving Safety an inconvenient time, if possible, let your voice mail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. Do not take notes or look up phone numbers while driving. Jotting down a to do list or going through your address book takes attention away from your primary responsibilitydriving safely. Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road. Use your mobile device to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies.*
Use your mobile device to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.*
Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.*
* Wherever wireless phone service is available. 77 Index A accessories 11, 43, 55 active phone line 38 advanced calling 51 airplane mode 54 alert set 41, 44 turn off 41, 47 answer a call 16 B battery 14 battery indicator 39 battery life, extend 12 BoostLive accessing 18 C call answer 16 end 16 78 Index make 16 call waiting 51 caller ID 48 calls 47 center key 41 center select key 11 codes 42 combined power/end/home key 15, 16 contacts 51 D datebook 52 dial a phone number 16 dialed calls 47 display 38 E earpiece volume 41 emergency number 48 end a call 16 export regulations 72 F frequently asked questions service and repairs 64 G GPS 53 GPS enabled emergency calls 49 GPS PIN 42 GPS, see GPS enabled H handsfree 55 handsfree speaker 42 Hearing Aid Compatibility 70 home screen 38 I incoming call message 48 international calls 49 iTAP text entry mode 40 K keypad locking 42 L lock phone 42 logo backlight 28 low battery message 39 M make a call 16 message indicator 39 messages 55 missed calls message 47 MMS 23 auto replies 24 priority 24 N navigation key 11, 41 O one touch WT 22 optional accessory 11, 55 optional feature 11 Index 79 P packet data 39 passwords 42 passwords. See codes personalize 55, 56 phone locking 42 phone number 17 power on combined power/end/home key 15 R radio frequency 58 received calls 47 recent calls 47 recycling 73 redial 47 return a call 47 ring style indicator 39 ring style, setting 41 ring tones off 44 setting 44 vibrate 44, 45 ringer volume 41 80 Index S safety radio frequency 58 RF energy interference 61 safety information 58 safety tips 76 security 42, 56 security code 42 send contacts 20 send events 19 send key 16 send my info 19 send pictures 20 send via WT 18 SIM PIN 42 soft keys 38 speaker 38 speed dial 50 store your number 17 T tap text entry mode 40 text entry 39 time & date 45 turn on/off 15 U unlock phone 42 unlock code 42 V voice mail receiving 50 setting up 50 voicemail 50 voicemail message indicator 50 volume 41 W WHO information 72 WT Features 18 WT services 18 Y your phone number 17 Index 81
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-06-26 | 896 ~ 901 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
2 | 902.525 ~ 927.475 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2007-06-26
|
||||
1 2 | Applicant's complete, legal business name |
Motorola Mobility LLC
|
||||
1 2 | FCC Registration Number (FRN) |
0004321311
|
||||
1 2 | Physical Address |
Motorola Mobility LLC
|
||||
1 2 |
Chicago, Illinois 60654
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
IHD
|
||||
1 2 | Equipment Product Code |
T56HH1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J****** N******
|
||||
1 2 | Title |
Director Product Compliance
|
||||
1 2 | Telephone Number |
847-6********
|
||||
1 2 | Fax Number |
847-6********
|
||||
1 2 |
n******@motorola.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/10/2007 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | i425 iDEN, MOTOtalk | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The maximum reported SAR values for this composite filing are: Body: 1.41 W/kg, Head: 1.35 W/kg. Power output is continuously variable from the value listed to 0.22mW. | ||||
1 2 | Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The maximum reported SAR values for this composite filing are: Body: 1.41 W/kg, Head: 1.35 W/kg. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Motorola EMC Lab - Plantation, FL
|
||||
1 2 | Name |
W**** E****
|
||||
1 2 | Telephone Number |
95472********
|
||||
1 2 | Fax Number |
95472********
|
||||
1 2 |
f******@motorola.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | 806 | 825 | 0.64 | 1.9 ppm | 18K3D7W | ||||||||||||||||||||||||||||||||||
1 | 2 | 9 | 806 | 825 | 0.64 | 1.9 ppm | 43K3D7D | ||||||||||||||||||||||||||||||||||
1 | 3 | 9 | 806 | 825 | 0.64 | 1.9 ppm | 68K3D7D | ||||||||||||||||||||||||||||||||||
1 | 4 | 9 | 806 | 825 | 0.64 | 1.9 ppm | 93K3D7D | ||||||||||||||||||||||||||||||||||
1 | 5 | 9 | 896 | 901 | 0.64 | 0.5 ppm | 18K3D7W | ||||||||||||||||||||||||||||||||||
1 | 6 | 9 | 896 | 901 | 0.64 | 0.5 ppm | 43K3D7D | ||||||||||||||||||||||||||||||||||
1 | 7 | 9 | 896 | 901 | 0.64 | 0.5 ppm | 68K3D7D | ||||||||||||||||||||||||||||||||||
1 | 8 | 9 | 896 | 901 | 0.64 | 0.5 ppm | 93K3D7D | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 902.52500000 | 927.47500000 | 0.8910000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC