MOTOROLA INC FCC ID: IHDT56CP1 IN-CABIN BLUETOOTH MODULE INSTALLATION INSTRUCTIONS
[Model# SYN9592A and cable length variants]
The In-Cabin Bluetooth Module facilitates a wireless Bluetooth interface between 1. GENERAL:
an in-vehicle control unit and other Bluetooth-enabled devices (such as a laptop PC, a handset, etc.). 2. ANTENNA AND MODULE INSTALLATION:
The module utilizes an internal, pc board mounted, chip antenna. The unit is All module installations are performed by the vehicle manufacturer. No end-user designed for installation within the passenger compartment of an automobile, usually in the center console area. The device should be mounted with a plastic bracket to minimize shadowing of the internal antenna. Due to the low power at which the unit transmits
(0.0025 W max.), placement from an SAR perspective is not critical. installation is involved. Any unauthorized changes or modifications not expressly approved by Motorola could void the users authority to operate this equipment. 3. I/O CONNECTION:
and vehicle bus communications. This connector will only mate with a corresponding connector in the vehicles prewire. 4. SPECIFICATIONS:
A cable mounted 20-pin female automotive connector is utilized to provide power 2402 MHz 2480 MHz
?? Frequency range:
?? Operating current:
?? Operating voltage:
?? Operating temp. range:
?? Storage temp. range:
?? Output power:
1.5A nominal 13.2V nominal
-30?C to +70?C
-40?C to +85?C 0.0025 W max MOTOROLA INC FCC ID: IHDT56CP1 IN-CABIN BLUETOOTH MODULE USER MANUAL
[Model# SYN9592A and cable length variants]
The In-Cabin Bluetooth Module facilitates a wireless Bluetooth interface between 1. GENERAL:
an in-vehicle control unit and other Bluetooth-enabled devices (such as a laptop PC, a handset, etc.). 2. ANTENNA AND MODULE INSTALLATION:
The module utilizes an internal, pc board mounted, chip antenna. The unit is All module installations are performed by the vehicle manufacturer. No end-user designed for installation within the passenger compartment of an automobile, usually in the center console area. The device should be mounted with a plastic bracket to minimize shadowing of the internal antenna. Due to the low power at which the unit transmits
(0.0025 W max.), placement from an SAR perspective is not critical. installation is involved. Any unauthorized changes or modifications not expressly approved by Motorola could void the users authority to operate this equipment. 3. I/O CONNECTION:
and vehicle bus communications. This connector will only mate with a corresponding connector in the vehicles prewire. 4. SPECIFICATIONS:
A cable mounted 20-pin female automotive connector is utilized to provide power 2402 MHz 2480 MHz
?? Frequency range:
?? Operating current:
?? Operating voltage:
?? Operating temp. range:
?? Storage temp. range:
?? Output power:
1.5A nominal 13.2V nominal
-30?C to +70?C
-40?C to +85?C 0.0025 W max