H270 Bluetooth Wireless Headset User manual

BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H270 Headset. 1 CHARGE Your Headset's Battery 2 START BLUETOOTH FEATURE Your Phone Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. motorola H270 Quick Start Guide Volume Button Call Button Indicator Light Earhook Speaker 1 2 Microphone Power Switch START HERE >

Features and Functions IMPORTANT:

Be sure to first follow the steps on the top row of this guide to complete initial setup of your H270. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.motorola.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 68000202001-A Bluetooth QD ID: Bxxxxxx MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. 2008 Motorola, Inc. All rights reserved. Verify slide switch is in the off position

(toward the charging port). Plug the Motorola charger into the end of the headset. The indicator light turns red or purple when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged

(about 2 hours), the indicator light turns blue. Disconnect the charger. 3 Note: Headset is not functional while charging. Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges. TURNING HEADSET ON AND OFF To turn your headset on, slide the switch toward the microphone. The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). To turn your headset off, slide the switch toward the charging plug. The indicator light flashes three times then turns off. Indicator Light Power Switch Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort. 3 PAIR Your Headset and Phone 4 TEST AND USE USING YOUR H270 For most Motorola phones (at the main menu):

1 Press (Menu) > Settings > Connection >

Bluetooth Link > Setup. M Scroll to Power. Select Change. Scroll to On. 2 3 4 5 Before you can use your headset, you must pair

(link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Power on headset by sliding the Power switch towards the microphone to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. Indicator Light

(steadily blue for pairing) Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. If the headset does not enter pairing mode, see TROUBLESHOOTING for help. Power Switch WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear as shown. CHANGING FOR USE ON OTHER EAR You can wear your H270 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:

1 2 3 Gently lift and pull the top of the earhook up and off speaker stem, as shown. Flip the headset over. Attach the earhook to the speaker stem, as shown. Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET 1 2 3 4 5 For most Motorola phones:

On your Motorola phone, press (Menu) >

M Settings > Connection > Bluetooth Link >

Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. Select Motorola H270. Select OK or Yes to pair your headset with your phone. Enter the passkey: 0000 Select OK. When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue and purple. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. MAKING CALLS Function Receive a call Reject a call End a call Make a voice dial call Answer second incoming Use phone to answer

(follow your phones call instructions) Action Tap the Call button Press and hold a Volume button until the ringer stops Tap the Call button Tap the Call button and wait for voice prompt Note: Your H270 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. Note: Some features are phone/network dependent. 1 2 Your phone and headset are now paired and ready to make and receive calls. To make a call:

Place the headset over your ear. On the phone, dial the number you want to call and press SEND key on your phone. If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. See Features and Functions on the bottom row for information on using your H270 Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again (see step 3). Note: To restore your headset to original factory settings, press and hold both Volume and Call buttons at the same time and slide Power switch to ON. INDICATOR LIGHT With the Charger Plugged In INDICATOR LIGHT With No Charger Plugged In Headset Indicator Red Purple Blue Headset Status Charging (battery level less than 70%

charge) Charging (battery level more than 70%

charge) Charging complete Note: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE YOUR BATTERY WILL DAMAGE THE PRODUCT. Headset Status Headset Indicator Power off Off Powering on/off Three blue flashes Steady blue Pairing/connect mode Rapid blue/purple flashes Connection successful Incoming/outgoing call Quick blue flash Slow blue pulse Connected (on a call) Standby (not on a call) Slow blue flash Idle (not connected Slow red flash to phone) Attempting to connect Steady red Quick red flash Low battery Note: After 30 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.motorola.com/Bluetoothsupport AUDIO TONES Audio Tone Ascending tone Two descending tones Ring tone Two short tones when pressing Volume button High/low tones repeated every 60 sec. No audio indications;

deteriorating quality Two ascending tones Headset Status Powering on Powering off Incoming call Volume at minimum or maximum Low battery Out of range Connected to phone European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with:

The essential requirements and other relevant provisions of Directive 1999/5/EC. All other relevant EU Directives. Product Approval Number The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity

(DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your products label in the Search bar on the web site. TROUBLESHOOTING My phone does not find my headphones. Make sure the L indicator light on your headphones is on and steady when your phone is searching for devices (see step 3). My headphones worked with my phone before but now their not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headphones again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support. DRAFTDRAFT