app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2024-06-13
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Motorola Mobility LLC
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0004321311
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
Motorola Mobility LLC
|
1 2 3 4 5 6 7 8 9
|
Chicago, Illinois 60654
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
Q******@sporton-usa.com
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
1 2 3 4 5 6 7 8 9
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8 9
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
IHD
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
T56AP8
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8 9
|
Name |
J****** N********
|
1 2 3 4 5 6 7 8 9
|
Title |
Director Product Compliance
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
847-6********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
847-6********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
n******@motorola.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/11/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 9 | Equipment Class | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
1 2 3 4 5 6 7 8 9 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 7 8 9 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 9 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 9 | DXX - Part 15 Low Power Communication Device Transmitter |
1 2 3 4 5 6 7 8 9 | 6XD - 15E 6 GHz Low Power Indoor Client |
1 2 3 4 5 6 7 8 9 | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
1 2 3 4 5 6 7 8 9 | PCE - PCS Licensed Transmitter held to ear |
1 2 3 4 5 6 7 8 9 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Cellular Phone |
1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Original Equipment |
1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 9 | Grant Comments | Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.19 W/kg, 1.27 W/kg, 1.19 W/kg, 1.28 W/kg and 3.19 W/kg, respectively. This device supports 20, 40, 80 and 160 MHz bandwidths modes. |
1 2 3 4 5 6 7 8 9 | Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.19 W/kg, 1.19 W/kg, 1.20 W/kg, 1.28 W/kg and 2.92 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidths modes. |
1 2 3 4 5 6 7 8 9 | The highest SAR values for product specific (10g SAR) and simultaneous transmission conditions are < 0.10 W/kg and 3.21 W/kg. |
1 2 3 4 5 6 7 8 9 | Output Power is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. RF exposure compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20, 40, 80, 160 and 320 MHz modes. Device 6 GHz operation is intended for indoor use only. |
1 2 3 4 5 6 7 8 9 | The highest SAR value is < 0.10 W/kg. |
1 2 3 4 5 6 7 8 9 | Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 and 5G n26 emissions, which are conducted. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.28 W/kg, 1.28 W/kg, 1.27 W/kg, 1.28 W/kg and 3.16 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38, 41 and 42. This device also supports LTE uplink carrier aggregation as described in this filing. This device also supports Frequency Range 1 5G NR modes of 5, 10, 15, 20, 25, 30, 35 and 40MHz bandwidth modes for FDD Bands n2, n7 and n66; 5, 10, 15 and 20MHz bandwidth modes for FDD Bands n5, n26 and n71; 10, 15, 20, 25, 30 and 40 MHz bandwidth modes for TDD Band n38; and 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90 and 100 MHz bandwidth modes for TDD Bands n41, n77 and n78. Frequency Range 1 5G NR ENDC modes and uplink carrier aggregations are supported by this device, as described in this filing. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
1 2 3 4 5 6 7 8 9 | Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.22 W/kg, 1.16 W/kg, 1.27 W/kg, 1.28 W/kg and 2.52 W/kg, respectively. |
1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
Sporton International Inc. (Kunshan)
|
1 2 3 4 5 6 7 8 9
|
Name |
J****** T******
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+86 0********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
J******@sporton.com.tw
|
|