all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Exhibit 8 Preliminary Users Manual Draft | Users Manual | 2.04 MiB | May 11 2003 / April 11 2003 | |||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Internal Photos | February 02 2004 | ||||||
1 2 3 | Attestation Statements | February 02 2004 | ||||||
1 2 3 | RF Exposure Info | February 02 2004 | ||||||
1 2 3 | ID Label/Location Info | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Parts List/Tune Up Info | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Attestation Statements | May 11 2003 / April 11 2003 | ||||||
1 2 3 | External Photos | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Test Report | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Internal Photos | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Attestation Statements | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Test Report | May 11 2003 / April 11 2003 | ||||||
1 2 3 | Attestation Statements | May 11 2003 / April 11 2003 | ||||||
1 2 3 | RF Exposure Info | May 11 2003 / April 11 2003 | ||||||
1 2 3 | RF Exposure Info | May 11 2003 / April 11 2003 |
1 2 3 | Exhibit 8 Preliminary Users Manual Draft | Users Manual | 2.04 MiB | May 11 2003 / April 11 2003 |
APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DH1 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows:
EXHIBIT 8 START HERE >
Welcome Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola E810 CDMA wireless phone. D R A F T 1 Check It Out!
D External Display View incoming call information R Camera Key Use to snap photos. Mirror Aim camera lens for self portraits A Camera Lens Take photos to send to others and use on your phone Feature Take Photo 2 F Description Activate the camera:
M > Media Center > Pictures M
> New > New Picture Point lens at subject, press CAPTURE (+), T K, or the camera key to capture viewfinder image. Shortcut: You can also activate the camera by pressing and holding the camera key. Feature Send Photo Set Photo as Caller ID Picture D Description Send the photo to a phone number or email address. After taking the photo:
Press STORE (+) > Send In Message Assign a photo to a Contacts entry to enable picture caller ID. After taking the photo:
Press STORE (+) > Apply to Contacts Send a message with inserted pictures, animations, sounds:
R M > Message Center > CREATE
> Multimedia Message Send Multimedia Message A F T 3 R D Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States) 1-800-461-4575 (Canada) www.motorola.com (United States) www.motorola.ca (Canada) MOTOROLA and the Stylized M Logo are registered in the US Patent &
Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2003. Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third-party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola F products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third-party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. T Manual number: 6809467A43-O Cover number:
8988485L61-O A 4 Contents R D Getting Started . 17 Whats in the Box?. 17 About This Guide. 17 Installing the Battery . 18 Charging the Battery . 19 Battery Use . 19 Turning On Your Phone . 21 Adjusting Volume. 21 Making a Call. 21 Answering a Call . 22 Changing the Call Alert . 23 Viewing Your Phone Number . 23 Highlight Features . 24 Taking and Sending a Photo . 24 Sending a Multimedia Message . 26 Receiving an MMS Message. 28 Learning to Use Your Phone . 30 Using the Display . 30 Using Menus . 34 Entering Text . 37 Using the External Display . 46 Locking and Unlocking Your Phone. 46 Changing a Code or Password . 48 If You Forget a Code or Password. 48 Setting Up Your Phone . 49 Storing Your Name and Phone Number . 49 Setting the Time and Date. 49 Setting an Alert Style. 49 A F T 5 R D Setting Answer Options . 50 Setting a Wallpaper Image . 50 Setting a Screen Saver Image . 51 Setting Display Color . 52 Adjusting the Backlight . 53 Hiding or Showing Location Information . 53 Calling Features . 55 Changing the Active Line . 55 Redialing a Number . 55 Using Automatic Redial. 55 Using Caller ID . 56 Canceling an Incoming Call . 56 Turning Off a Call Alert . 57 Calling an Emergency Number. 57 Viewing Recent Calls . 58 Returning an Unanswered Call . 59 Using the Notepad . 59 Attaching a Number . 60 Calling With Speed Dial . 61 Calling With 1-Touch Dial . 61 Using Voicemail . 62 Muting the Phone . 63 Using Call Waiting. 63 Messages . 65 Setting Up the Message Inbox . 65 Sending a Text Message. 66 Viewing the Status of Sent Text Messages. 72 Receiving a Text Message . 72 Reading, Locking, or Deleting a Text Message. 73 Downloading Pictures and Ring Tones . 76 Setting Up Your Contacts . 79 Viewing Entry Details . 79 A F T 6 R D Creating a Contacts Entry . 80 Storing a PIN Code With a Phone Number. 81 Recording a Voice Name For a Contact . 83 Dialing a Contacts Entry . 84 Storing Longer Numbers . 84 Editing a Contacts Entry . 86 Deleting a Contacts Entry . 86 Sorting the Contacts List . 86 Personalizing Your Phone . 88 Personalizing a Ring Style. 88 Activating Ringer IDs. 88 Setting Keypad Volume . 89 Setting Reminders. 89 Personalizing Display Text. 90 Setting the Menu View . 90 Personalizing the Menu. 91 Personalizing Soft Keys and Menu Icons . 92 Setting the Menu Language . 92 Setting Menu Scroll Behavior . 93 Resetting All Options. 93 Clearing All Stored Information . 93 Creating and Using Shortcuts . 94 Getting More Out Of Your Phone. 98 Making a 3-Way Call . 98 Restricting Calls . 98 TTY Operation. 99 Setting Auto PIN Dial. 101 Using DTMF Tones . 102 Monitoring Phone Use. 103 Using Handsfree Features . 105 Making Data and Fax Calls . 108 Adjusting Network Settings . 113 A F T 7 D Monitoring Battery Charge . 115 Viewing Phone Specifications. 116 Personal Organizer. 117 Datebook. 117 Voice Memos . 123 Calculator . 128 Security . 131 Locking and Unlocking Applications . 131 News and Entertainment . 132 Micro-Browser. 132 Picture Viewer. 135 Creating Ring Tones . 137 Radio. 143 Troubleshooting . 146 FDA Health and Safety Information . 157 Warranty . 162 Index . 168 R A F T 8 Menu Map Main Menu r Contacts z Recent Calls D a /Settings
(see next page) f More
(go to following menu items) x Shortcuts Voice Memos Office Tools
Calculator
Datebook R A
Received Calls
Dialed Calls
Notepad
Call Times
Data Times
Data Volumes U Message Center
Voicemail
Msg Inbox
Drafts
Templates
Outbox
Safebox
Settings Z Get It Now VLaunch Mobile Web
Home
Go To URL
Mark Site
Reload
About Openwave
Advanced W Media Center
Pictures
Sounds t Alert Styles
Style Style Detail Style Haptics
Sounds F This is the standard main menu layout. Menu organization and feature names may vary on your phone. If you do not find a feature in the main menu, select More
(f) to see additional menu features. Not all features may be available for all users. For example, the Radio option under Media Center is available only when the optional FM Stereo Radio Headset accessory is plugged into your phone. T
* Optional network/subscription dependent feature. 9
Settings Menu
More
(go to following menu items)
Network
Car Settings
Headset D R Personalize Initial Setup
Main Menu
Home Keys
Color Style
Greeting
Banner
Haptics
Wallpaper
Themes
Screen Saver
Time and Date
Auto PIN Dial
Auto Redial
Backlight
Service Lamp
TTY Setup
Scroll
Animation
Language
Brightness
DTMF
Master Reset
Master Clear
Browser Setup
Connection Incoming Call In-Call Setup In-Call Timer
Answer Options
Phone Status
Security
My Tel. Number
Active Line
Battery Meter
Other Information
Phone Lock
Lock Side Keys
Lock Application
Restrict Calls
New Passwords
1xRTT Data
Location 10 A Shortcuts Change display zoom:
Press M, then press and hold M Change ringer alert:
F Open flip, press down volume key to decrease volume, then switch to silent alert. Press up volume key to reset ring alert and increase volume. T Display my phone number:
Press M # (in idle) Go to dialed calls list:
Press N (in idle) Exit menu system:
Press O
Safety and General Information R D IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. The information provided in this document supersedes the general safety information in user guides published prior to December 1, 2002. Exposure To Radio Frequency (RF) Energy Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy. Operational Precautions To assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set forth in the relevant standards, always adhere to the following procedures. External Antenna Care Use only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone. Do NOT hold the external antenna when the phone is IN USE. Holding T the external antenna affects call quality and may cause the phone to operate at a higher power level than needed. In addition, use of unauthorized antennas may result in non-compliance with the local regulatory requirements in your country. A F 11 R D Phone Operation When placing or receiving a phone call, hold your phone as you would a wireline telephone. Body-Worn Operation To maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the body-worn accessories approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least 1 inch (2.5 centimeters) from your body when transmitting. Data Operation When using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least 1 inch (2.5 centimeters) from your body. Approved Accessories Use of accessories not approved by Motorola, including but not limited to batteries and antenna, may cause your phone to exceed RF energy exposure guidelines. For a list of approved Motorola accessories, visit our website at www.Motorola.com. RF Energy Interference/Compatibility Note: Nearly every electronic device is susceptible to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your phone may cause interference. Facilities Turn off your phone in any facility where posted notices instruct you to do so. These facilities may include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy. A F T 12 Aircraft When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker. Persons with pacemakers should:
D R ALWAYS keep the phone more than 6 inches (15 centimeters) from your pacemaker when the phone is turned ON.
NOT carry the phone in the breast pocket.
Use the ear opposite the pacemaker to minimize the potential for interference. Turn OFF the phone immediately if you have any reason to suspect that interference is taking place. A F Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your T physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of phones in the area where you drive. Always obey them. 13
When using your phone while driving, please:
Give full attention to driving and to the road.
Use hands-free operation, if available. Pull off the road and park before making or answering a call if driving conditions so require. D A R Responsible driving best practices may be found in the Wireless Phone Safety Tips at the end of this manual and at the Motorola website:
www.Motorola.com/callsmart. Operational Warnings For Vehicles With an Air Bag Do not place a phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless it is a phone type especially qualified for use in such areas and certified as Intrinsically Safe. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive F atmosphere can cause an explosion or fire resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical T transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in 14
areas posted Turn off electronic devices. Obey all signs and instructions. Batteries Batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola original batteries and chargers. Your battery or phone may contain symbols, defined as follows:
D R Definition Important safety information will follow. Symbol LiIon BATT A Your battery or phone should not be disposed of in a fire. Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information. Your battery or phone should not be thrown in the trash. Your phone contains an internal lithium ion battery. F T Seizures/Blackouts Some people may be susceptible to epileptic seizures or blackouts when exposed to blinking lights, such as when watching television or playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your doctor before 15 playing video games on your phone or enabling a blinking-lights feature on your phone. (The blinking-light feature is not available on all products.) Parents should monitor their children's use of video game or other features that incorporate blinking lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. To limit the likelihood of such symptoms, please take the following safety precautions:
D
Do not play or use a blinking-lights feature if you are tired or need R sleep. Take a minimum of a 15-minute break hourly. Play in a room in which all lights are on. Play at the farthest distance possible from the screen. Repetitive Motion Injuries When you play games on your phone, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. Follow these instructions to avoid problems such as tendonitis, carpal tunnel syndrome, or other musculoskeletal disorders:
A F Take a minimum 15-minute break every hour of game playing. If your hands, wrists, or arms become tired or sore while playing, stop and rest for several hours before playing again. If you continue to have sore hands, wrists, or arms during or after play, stop playing and see a doctor. T 16
Getting Started Whats in the Box?
D Your dphone typically comes with a battery and charger. You can purchase other accessories to customize your phone for maximum performance and portability. To purchase Motorola Original accessories, contact the Motorola Customer Call Center at 1-800-331-6456 in the United States or 1-800-461-4575 in Canada. About This Guide R G e t t i n g S t a r t e d Optional Features A This label identifies an optional network or subscription-dependent feature that may not be offered by all service providers in all geographical areas. Contact your service F provider for more information. Optional Accessories This label identifies a feature that requires an optional Motorola Original accessory. T Installing the Battery You must install and charge the battery to use your phone. 17 Your phone is designed for use only with Motorola Original batteries and accessories. Store batteries in their protective cases when not in use. Action D 1I 2 3 R A F T d e t r a t S g n i t t e G 18 Charging the Battery New batteries are partially charged. Before using your phone, install and charge the battery. Some batteries perform best after several full charge/discharge cycles. Action D 1 Attach the charger into the phone, and plug the other end into an appropriate electical outloet. R 2 When you see Charge Complete), press the release tab and remove the charger. A F Note: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete. At least 1 segment of the battery level indicator must be visible to ensure full phone functionality while charging. Battery Use Battery performance depends on many factors, including T your wireless carriers network configuration; signal strength; the temperature at which you operate your phone; the features and/or settings you select and use;
items attached to the phones accessory connector port;
and your voice, data, and other application usage patterns. G e t t i n g S t a r t e d 19 Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals. To maximize your batterys performance:
Always use Motorola Original batteries and battery chargers. The phone warranty does not cover damage caused from using non-Motorola D batteries and/or battery chargers.
New batteries or batteries that have been stored for long periods of time may require a longer charge time.
Maintain the battery at or near room temperature R when charging.
Do not expose batteries to temperatures below
-10C (14F) or above 45C (113F). Always take your phone with you when you leave your vehicle.
When you do not intend to use a battery for a while, A store it uncharged in a cool, dark, dry place, such as a refrigerator.
Over extended periods of time, batteries gradually F wear down and require longer charging times. This is normal. If you charge your battery regularly and notice a decrease in talk time or an increase in charging time, then it is probably time to purchase a new battery. T The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your batterys label for battery type. Contact your local recycling center for proper disposal methods. Never dispose of batteries in a fire because they may explode. d e t r a t S g n i t t e G 20 Turning On Your Phone Action Press & hold for 3 seconds. 1 D 2 If necessary, enter your 4-digit unlock code and press OK (+) to unlock the phone. R Adjusting Volume Press up or down to:
Volume Buttons A adjust earpiece volume during a call adjust ringer volume from home screen (with flip open) turn off an incoming call alert F Making a Call Action 1 Dial the number. T Tip: If you make a mistake, press the clear key C to delete the last digit. Press and hold C to clear all digits. G e t t i n g S t a r t e d 21
Action 2 Press N to make the call. 3 Press P to end the call. D Note: You must dial the phone number from the idle display. See page 30. Answering a Call When you receive a call, your phone rings and/or vibrates and displays an incoming call message. R Action 1 Press N to answer. 2 Press P to end the call. A F Tip: When the phone flip is active, open the phone to answer the call. (To activate, press K > Settings > In-Call Setup
> Answer Options > Open to Answer) Note: If the phone is locked, you must unlock it to answer the call. T d e t r a t S g n i t t e G 22 Changing the Call Alert Volume Buttons R D Phone Flip Open Press the down volume button to switch to lower call alert volume, then switch to vibrate and , finally, silent alert. Press the up volume button to cycle back from silent alert to vibrate and then to the lowest alert volume setting.. Phone Flip Closed Press the smart key, then press the up and down volume buttons to scroll through the alert styles:
Loud, Soft, Vibrate, Vibe & Ring, and Silent. The alert styles shown on the external display. After scrolling to the desired alert style, press the smart F key to save the setting and return to the idle display. Viewing Your Phone Number To view your phone number from the idle display, press T K #. While you are on a call, press M > My Tel. Numbers. A Volume Buttons Smart Key G e t t i n g S t a r t e d 23 Highlight Features Taking and Sending a Photo D To activate your phones camera:
Find the Feature M > Media Center > Pictures M
> New > New Picture Shortcut: You can also activate the camera by pressing and holding the camera key. The active viewfinder image appears. R Press S up or down to zoom in or out on viewfinder image. Press S left or right to decrease or increase image brightness. A IMAGE AREA Viewfinder resolution. Low(160x120) Freeze the F viewfinder image. CAPTURE M BACK Return to previous screen. Press M to open Pictures Menu. T s e r u t a e F t h g i l h g H i 24 To take a photo:
Action 1 Aim the camera. 2 If desired, press M to go to the Pictures Menu. D See the table following these steps for a list of Pictures Menu options. 3 Press CAPTURE (+), K, or the camera button to take the photo. 4 Press STORE (+). Continue to step 4 below. R or Press DISCARD (-) to delete the photo and return to active viewfinder mode. 5 Scroll to Send in Message, Store, Apply to Contact, A 6 Press SELECT (+) to select the desired option. Apply as Wallpaper, or Apply as Screen Saver. Tip: Use the mirror beside the camera lens to aim the lens for a self portrait. When the camera is active, the Pictures Menu can include:
F Option Quality Zoom Change resolution Description Select Low, Normal, or Best. T Zoom closer to or farther from the image. Select Low (160X120), Med(320X240), or High(640X480) i H g h l i g h t F e a t u r e s 25 Option Change Brightness Description Modify the image brightness to adjust for lighting differences. Increase or decrease contrast. Select an alternative effect for the photo. Select a frame for the photo. Set a flash for photos taken in settings with low light. Change Contrast D Change Image Style Add image border Flash R Mirror Effect Multi Shot Night Mode Shutter Tone STATUS Delete All View Used Space Set the camera to take multiple photos in quick A succession when you press CAPTURE (+) 1 time. Set the camera to adjust automatically for low light. Change the sound the phone makes as it takes a photo. View curent settings for all camera options. Delete all stored photos. T View the percent of photo memory currently available. F s e r u t a e F t h g i l h g H i 26 Sending a Multimedia Message A Multimedia Messaging Service (MMS) message can contain media elements including text, photos, pictures, animations, sounds,and voice records. You can send the D message to other wireless phones and to email addresses. Find the Feature M > Message Center
> Create (+)
> Multimedia Message R Action 1 Type the message. or A Insert a media element a Press M. b Scroll to Insert and press SELECT (+) or K. See the table following these steps for a list of Multimedia Menu options. F c Scroll to the file you want and press SELECT (+). 2 If desired, enter message text (or modify existing T message text). 3 Press NEXT (+) go to the Send To: screen. i H g h l i g h t F e a t u r e s 27 4 Scroll to the desired entry from your Contacts list Action and press K. or D Add anew contact:
a Scroll to [New Contact] and press K. b Scroll to and select Phone Number or Email Address. c Enter and store 1 or more phone numbers R and/or email addresses. 5 Press NEXT (+) toproceed to the Send screen, and A complete the desired entries:
Subject:Type the subject and press OK (+). Cc:Press K to begin entering message copy recipient(s). BCC: Press K to begin entering recipient(s) of message copy who are not to be known to other recipient(s). Priority:Set to Normal or Urgent. Read Reply:
Receipt:Specify whether you want to receive an T indication that message is delivered. Attachment:Press K to begin adding a picture, animation, or sound. F 6 Press SEND (-) to send the message s e r u t a e F t h g i l h g H i 28 The Multimedia Message Menu can include these options:
Option Insert D R Description select and insert:
Pictureprestored picture or animation Soundprestored sound Voice Memostored voice memo New Picturea photo that you take while composing the message New Voice Memoa Voice Memo that you record while composing the message New Pageinserts an additional A message page The indicator at the top of the multimedia message page (for example, 2/2) specifies the currently displayed page of the F message. New Templatepre-written text message (for example, Call me at ...) You can also create new Text Templates. select Numeric, Symbol, Primary, or Secondary (see page 38) T Entry Mode i H g h l i g h t F e a t u r e s 29 Option Entry Setup Cut Copy Paste Format Text Previous Page/Next Page Description select TAP or iTAP (see page 38) delete text copy text paste text that was copied previously apply formatting options to text navigate through message pages D R Receiving an MMS Message When you receive an MMS message, your phone displays X (message waiting) and A New Message, and sounds an alert. Press READ (+) To open the message F Received MMS messages can contain the following:
Inserted photos, pictures, and animations, displayed as you read the message.
An inserted sound file, which plays when you scroll to the sound file indicator in the message. Use the volume keys to adjust volume. T
Attached files, appended to the end of the message. To open the attachment, highlight the file indicator/
s e r u t a e F t h g i l h g H i 30
filename and press VIEW (+) (image file type), PLAY (+)
(sound file), or OPEN (+) (vObject or unknown file type). The device may request permission to bond with your phone. Select YES (-) and enter the PIN code to create a secure connection. When the connection is made, the E (Bluetooth) indicator appears at the top of the display. D R A F T i H g h l i g h t F e a t u r e s 31 Learning to Use Your Phone See page 1 for a basic phone diagram. D Using the Display The idle display (shown below) is the standard display you see when you are not on a call or using the menu. You must be in the idle display to dial a phone number. R 5
#8?I M VQ
Clock e n o h P r u o Y e s U o t g n n r a e L i Service Provider 2:49pm 08/19/03 A V Z W K U F STYLES RECENT M Soft Key Labels T Press the 4-way navigation key (S) left, right, up, or down to select one of the 4 menu options in the idle display. Labels at the bottom corners of the display show the current soft key functions. Press the left soft key (-) or 30 right soft key (+) to perform the function indicated by the left or right soft key label. The following status indicators can display:
In Use Indicator Roam Indicator D Active Line Indicator Digital/Analog Signal Indicator 5
#8?I M VQ
Service Provider Signal Strength Indicator R ALI Indicator Battery Level Indicator Alert Style Indicator STYLES A RECENT M Message Waiting Indicator Signal Strength Indicator Indicates the strength of your phones connection with the network. Strong 5 4 3 2 1 0 No Signal F You cannot make or answer calls when the no signal indicator displays. T Digital/Analog Signal Indicator Shows whether you are receiving a digital or analog signal:
# = digital signal
! = analog signal i L e a r n n g t o U s e Y o u r P h o n e 31
$ = 13K digital
& = packet data service
% = 8K digital In Use Indicator Indicatesthat a call is in progress. Other indicators can include:
D 6 = secure CSD call 7 = unsecure CSD call 9 = secure packet
: = unsecure packet data transfer data transfer
; = secure R
< = unsecure application connection application connection Roam Indicator Displays when your phone uses another network outside your home network (,). When you leave your home network area, your phone roams, or seeks, A another network. Active Line Indicator Shows I or K to F indicate the currently active phone line. ALI Indicator Shows the status of the automatic location information feature:
N = ALI on T M = ALI off Battery Level Indicator Vertical bars show the battery charge level. Recharge the battery when you see Low Battery and hear the low battery alert. e n o h P r u o Y e s U o t g n n r a e L i 32 Ring Style Indicator Shows the ring style setting:
V = loud ring Z = vibrate Y = silent W = soft ring X = vibrate and ring D Message Waiting Indicator Appears when you receive a text message. Other indicators can include:
R = voicemail message S = voicemail and text message R A F i L e a r n n g t o U s e Y o u r P h o n e T 33 Using Menus e n o h P r u o Y e s U o t g n n r a e L i D Contacts Menu Key Enter a sub-menu. r s U Z V W t / f EXIT SELECT R Left Soft Key Perform functions identified by left display prompt.. 4-Way Navigation Key Scroll up, down, left, or right. Right Soft Key Perform right function. OK Key Enter Main Menu. A End Key Exit menu without making changes. F Selecting a Menu Feature You can access most of your phones features through a system of menus. The idle display shows 4 icons that T represent 4 of these menus. Press S to select one of these icons and open the corresponding menu. 34 Press M to display the main menu. From the main menu you can select the following feature menus, which are represented by the icons shown:
Menu Menu Icon Icon Feature Feature D t Alert Styles r Contacts
/ Settings s Recent Calls Voice Memos U Message Center f More Z Get it Now R x Shortcuts V Launch Mobile Web Office Tools W Media Center
* Optional network/subscription dependent feature. A Press More (f) to see features listed above that do not appear in the main menu. Note: Menu organization, feature names, and feature availability may vary depending on your service provider and service subscription options. Tip: You can set your phone to display the main menu as a text-based list rather than graphic icons. See page 90. Selecting a Menu Feature T From the idle display, select a menu feature as follows:
Find the Feature F M > Contacts i L e a r n n g t o U s e Y o u r P h o n e This example shows that from the idle display, you must press OK, then scroll to and select Contacts from the main menu. Use S to scroll, and the left/right soft keys to select 35 the functions listed in the bottom left and right corners of the display. Selecting a Feature Option Some features require you to select an item from a list:
D DIALED CALLS 6) Voice Mail
\ 5) Eric Smith
\ 4) Mary Smith
\ 3) Jesse Jones
\ 2) Jason Jones R Press BACK (-) to go back to previous screen. BACK e VIEW Highlighted item Press VIEW (+) to view details of highlighted item. Press M to open sub-menu. A
Press S to scroll up or down to highlight an item. In a numbered list, press a number key to highlight the item. In an alphabetized list, press a key repeatedly to cycle through the letters on the key and highlight the closest matching list item. F
When an item has a list of possible values, press S left or right to scroll to a desired value, then K to T select it.
When an item has a list of possible numeric values, press a number key to set the value. e n o h P r u o Y e s U o t g n n r a e L i 36
Entering Text Some features require you to enter information:
New Contact D
Press S to scroll down to additional items. Name:
No:
Type: Work Voice Name:
Ringer ID:
Highlighted item Press CHANGE (+) or K to enter or edit information. CANCEL CHANGE R Press CANCEL (-) to exit without making changes. DONE (-) displays when you enter or edit information. A The message center lets you compose and send text messages. A flashing cursor shows where text will appear:
Flashing cursor indicates insertion point. Create Ab 3 Press M to Are open F sub-menu. Press NEXT (+) to display the T Send To: screen. CANCEL e NEXT Press CANCEL (-) to exit without making changes. i L e a r n n g t o U s e Y o u r P h o n e 37 Choosing an Entry Method Most text entry screens let you enter letters, numbers, and/
or symbols as required. Press M > Entry Setup) from a text entry screen to select an entry method:
iTAP D Tap Method Let the phone predict each word as you enter it (see page 41). Enter letters, numbers, and symbols by pressing a key one or more times (see following section). R Choosing an Entry Mode Any time you enter text, you can select the entry mode:
Numeric Symbol Primary Secondary Enter numbers only. A Enter symbols only (see page 45). Specify your preferred entry method
(iTAP or Tap Method). Specify an alternate entry method (iTAP or Tap Method). F Press the # key to cycle through entry modes. Entry Screen Displays T Whenever you are in an entry screen, icons at the top of the screen indicate the entry method and mode:
e n o h P r u o Y e s U o t g n n r a e L i Primary ab Ab Secondary ab Ab Tap, no capital letters Tap, next letter capital 38 Primary Secondary AB ab Ab AB AB ab Ab AB Tap, all capital letters iTAP, no capital letters iTAP, next letter capital iTAP, all capital letters D Using Tap Method This is the standard mode for entering text on your phone. Press M > Entry Method from any text entry screen and select the Tap Method menu option. R Press 1 a number key 1 or more times 2 number keys 3 OK (+) A To select a letter, number, or symbol shown in the Character Chart on page 41 enter the remaining characters F store the text when you are finished i L e a r n n g t o U s e Y o u r P h o n e T 39 General Text Entry Rules Press a number key repeatedly to cycle through its characters. See the Character Chart on page 41. D R Press a number key as many times as necessary to enter desired character at flashing cursor location. Press & hold a number key to cycle between text and numeric entry modes. A Press up or down to change letter in block cursor to uppercase or lowercase. Press left or right to move flashing cursor to left or right in text message. F If you do not press a key for 2 seconds, the character in the block cursor is accepted, and the cursor moves to the next position. T
The first character of every sentence is capitalized.
(Press S down to force the character to lowercase while it is highlighted by the block cursor.) e n o h P r u o Y e s U o t g n n r a e L i 40
Character Chart Use this chart as a guide for entering characters with the tap method. 1 D space . 1 ? ! , @ _ & ~ : ; " -
a b c 2 d e f 3 g h i 4 j k l 5 R p q r s 7 t u v 8 2 3 4 5 6 m n o 6 7 8 9 w x y z 9 0 A
+ - 0 x * / \ [ ] = > < #
Note: This chart may not reflect the exact character set available on your phone. Using iTAP Software Predictive Text F Entry Method iTAP software is a predictive text entry method that lets you enter a word using 1 keystroke per letter. T Press M > Entry Setup from any text entry screen and select the iTAP menu option. Note: You can switch languages within a message in iTAP text mode. Press M > Entry Setup to select the language you want to use. i L e a r n n g t o U s e Y o u r P h o n e 41 Entering Words Action 1 Press a number key 1 time to enter the first letter of the word. The letters associated with the key are shown at the bottom of the display. D 2 Press number keys (1 per letter) to enter the rest R of the word. Alternative words and letter combinations are shown at the bottom of the display. The word choices are updated with each keypress. 3 Press S to highlight the word you want. 4 Press SELECT (+) to enter the word at the flashing cursor location. A space is automatically inserted after the word. A For example, to spell the word art, press 2 7 8. The display shows:
F Create Ab 643 Art Press S to scroll and see additional word choices. T Art Apt CPU Bru LOCK Press LOCK (+) to insert highlighted word portion.
CANCEL Flashing cursor indicates insertion point. Press CANCEL (-) to cancel message. e n o h P r u o Y e s U o t g n n r a e L i 42 Entering Novel Words You may enter a word that the iTAP software does not recognize. If the word you want is not displayed:
Action D 1 Press C 1 or more times to delete letters until you see a letter combination that matches the start of the word. 2 Press S left or right to highlight the letter or letter combination. 3 Press LOCK (+) to lock the selected word R portion. 4 Continue to enter letters and highlight letter combinations to spell the word. Entering Punctuation A Press 0 or 1 To enter punctuation or other characters as shown in the F Character Chart on page 41 i L e a r n n g t o U s e Y o u r P h o n e T 43 Using Capitalization The first word of a sentence is automatically capitalized, with following words in lowercase. D Action Press S up once to change the highlighted word or letters to initial character capitalized Press S up twice to change the highlighted word or letters to uppercase characters Press S down once to change the highlighted word or letters to lowercase characters R Entering Numbers Action 1 Enter the first digit and then highlight it to put the A iTAP software in number entry mode 2 Press number keys to add digits to the number 3 Press SELECT (+) to enter the number at the flashing cursor location F Deleting Letters and Words Place the cursor to the right of the text you want to delete, and then do the following:
T Action Press C to delete 1 letter at a time Hold C to delete the entire message e n o h P r u o Y e s U o t g n n r a e L i 44 Using Symbol Mode As an alternate way to enter symbol characters in a message, press M > Entry Mode from any text entry screen and select Symbol. Action D 1 Press a number key 1 time to display its symbol options at the bottom of the display. See the Symbol Chart on page 45. 2 Press S, or press the number key multiple times, to highlight the symbol you want. R 3 Press SELECT (+) to enter the symbol at the flashing cursor location. Symbol Chart Use this chart as a guide for entering characters in symbol mode. A 1 space . ? ! , @ _ & ~ : ; "
F i L e a r n n g t o U s e Y o u r P h o n e 2 @ _ \
3 4 5 6 7 8
T 45 9 0
+ - x * / = > < #
Note: This chart may not reflect the exact character set available on your phone. Using the External Display D When the flip is closed, the external display shows the time, date, and phone status information. It also displays messages to notify you of incoming calls and other events. See pages 3133 for descriptions of the status indicators that may appear. R A Locking and Unlocking Your Phone You can lock your phone manually or set the phone to lock automatically whenever you turn it off. To use a locked phone, you must enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer. You can make emergency calls on your phone even when it is locked. For more information, see page 57. Locking Your Phone Manually F T M > Settings > Security
> Phone Lock > Lock Now e n o h P r u o Y e s U o t g n n r a e L i Find the Feature 46 Press 1 keypad keys 2 OK (+) To enter your unlock code lock the phone D Unlocking Your Phone Tip: Your phones unlock code is originally set to 1234 at the factory. Many service providers reset the unlock code to the last 4 digits of your phone number. At the Enter Unlock Code prompt:
Press R To enter your unlock code unlock your phone 1 keypad keys 2 OK (+) Setting Your Phone to Lock Automatically You can set your phone to lock every time you turn it off. Find the Feature A M > Settings > Security F
> Phone Lock
> Automatic Lock
> Verify Unlock Code
> On i L e a r n n g t o U s e Y o u r P h o n e Press 1 keypad keys 2 OK (+) To enter your unlock code activate automatic lock T 47 Changing a Code or Password Your phones 4-digit unlock code is originally set to 1234, and the 6-digit security code is originally set to 000000 at the factory. Your service provider may reset these numbers before you receive your phone. If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information. The unlock code must contain 4 digits, and the security code must contain 6 digits. To change a code or password:
D R Find the Feature M > Settings > Security
> New Passwords If You Forget a Code or A Password If you forget your security code, contact your service provider. If you forget your unlock code, try entering 1234 or the last 4 digits of your phone number. If that does not work, do the following at the Enter Unlock Code prompt:
F e n o h P r u o Y e s U o t g n n r a e L i Press 1 M 2 keypad keys 3 OK (+) To T go to the unlock code bypass screen enter your security code submit your security code 48 Setting Up Your Phone Storing Your Name and Phone Number D To store or edit your name and phone number on your phone:
Find the Feature R
> My Tel. Number M > Settings > Phone Status Defining the Time and Date Format You can define the format your phone uses to show the time and date on the idle display. Find the Feature A M > Settings > Initial Setup F
> Time and Date Setting an Alert Style Your phone rings or vibrates to notify you of an incoming call or other event. This ring or vibration is called an alert. T You can select one of five different alert styles:
V = Loud Z = Vibrate Y = Silent W = Soft X = Vibe & Ring S e t t i n g U p Y o u r P h o n e 49 The ring style indicator in the display shows the current alert style (see page 31). Flip Open To set an alert style using menu selections:
Find the Feature D M > Alert Styles > Style Press 1 S left or right 2 SELECT (+) To scroll to the alert style select the ring style R Each ring style contains settings for specific event alerts, ringer ID, and ringer and keypad volume. To change these settings, press M > Ring Styles > Style Detail. Flip Closed A Press the smart key, Volume Buttons then press the up and down volume buttons to scroll through the alert styles: Loud, Soft, Vibrate, Vibe
& Ring, and Silent. The alert styles shown on the external display. After scrolling to the desired alert style, press the smart T key to save the setting and return to the idle display. F Smart Key e n o h P r u o Y p U g n i t t e S 50 Setting Answer Options You can use different methods to answer an incoming call. Find the Feature M > Settings > In-Call Setup
> Answer Options D The Answer Options menu includes:
Multi-key answer by pressing any key Open to Answer answer by opening the flip Setting a Wallpaper Image You can set a picture or animation as a wallpaper
(background) image in your phones display. Note: When you set an animation as a wallpaper image, only the first frame of the animation is displayed. Find the Feature R A M > Settings > Personalize
> Wallpaper Press 1 S 2 CHANGE (+) 3 S up or down 4 SELECT (+) 5 S 6 CHANGE (+) To F scroll to Picture open the picture viewer scroll to a picture/animation Scroll to (None) to turn off the wallpaper image. select the image scroll to Layout adjust the image layout T S e t t i n g U p Y o u r P h o n e 51 Press 7 S To scroll to Center or Tile Center places the image in the center of the display and, if necessary, shrinks the image to fill the display. Tile fills the display with adjacent copies of the image confirm the layout setting save wallpaper settings D 8 CHANGE (+) 9 DONE (-) R You can also set a photo as wallpaper immediately after you capture the photo (see page 24). Setting a Screen Saver Image You can set a picture or animation as a screen saver A image. The image is displayed when the phone flip is open and no keypresses are detected for a period of time. The screen saver image is shrunk to fill the display, if F necessary. An animation repeats for one minute, then the first frame of the animation is displayed. Tip: Turn off the screen saver to extend battery life. Find the Feature Press 1 S 2 CHANGE (+) M > Settings > Personalize T
> Screen Saver To scroll to Picture open the picture viewer e n o h P r u o Y p U g n i t t e S 52 Press 3 S up or down To scroll to a picture/animation Scroll to (None) to turn off the screen saver image. select the image D scroll to Delay set the delay interval scroll to the inactivity interval that triggers the screen saver confirm the delay setting save screen saver settings R 4 SELECT (+) 5 S 6 CHANGE (+) 7 S 8 CHANGE (+) 9 DONE (-) Setting Display Color You can select the color palette that your phone uses to display indicators, highlights, and soft key labels. M > Settings > Personalize Find the Feature A
> Color Style Adjusting the Backlight F You can set the amount of time that the display and keypad backlights remain on, or turn off backlights to extend battery life. Find the Feature M > Settings > Initial Setup T
> Backlight S e t t i n g U p Y o u r P h o n e 53 Hiding or Showing Location Information Your phone can use the automatic location information (ALI) feature to tell the network where you are physically located. When ALI is set to Location On, your phone D displays the N (ALI on) indicator. Services may use your known location to provide useful information (for example, driving directions, or the location of the nearest bank). Your phone prompts you when the network or a service asks for your location. You can refuse at this point. When ALI is set to 911 Only, your phone displays the M (ALI R off) indicator, and the phone does not send location information unless you call the emergency phone number (such as 911). A M > Settings > Location Find the Feature Press 1 S 2 SELECT (+) To scroll to Location On or 911 Only select the setting F To view or change the location transmission status of your phone during a call, press M > Location. T e n o h P r u o Y p U g n i t t e S 54 Calling Features For basic instructions on how to make and answer calls, see page 21. Changing the Active Line D Change the active phone line to make and receive calls from your other phone number. Find the Feature M > Settings > Phone Status R
> Active Line The active line indicator in the display shows the current active phone line. See page 30. Redialing a Number If you hear an ordinary busy signal:
A Press 1 O 2 N F To hang up redial the busy number T Using Automatic Redial If the network is busy, you hear a fast busy signal, and your phone displays Call Failed. C a l l i n g F e a t u r e s 55 With automatic redial, your phone automatically redials the number for four minutes. When the call goes through, your phone rings or vibrates one time, displays Redial Successful, and then connects the call. You must turn on automatic redial to use the feature. To turn automatic redial on or off:
D Find the Feature M > Settings > Initial Setup
> Auto Redial When automatic redial is turned off, you can manually activate the feature to redial a phone number. When you R hear a fast busy signal and see Call Failed:
Press N or RETRY (+) To activate automatic redial Using Caller ID A Calling line identification (caller ID) displays the phone number for incoming calls in your phones external and internal displays. F When the callers name is stored in Contacts, your phone displays the name or a picture, if you have assigned a picture to that entry. T The phone displays the callers name when the name is stored in Contacts, or Incoming Call when caller ID information is not available. s e r u t a e F g n i l l a C 56 Canceling an Incoming Call While the phone is ringing or vibrating:
Press O or IGNORE (-) To cancel the incoming call D Depending on your phone settings and/or service subscription, the call may be forwarded to another number, or the caller may hear a busy signal. R Turning Off a Call Alert You can turn off your phones incoming call alert before answering the call. A To turn off the alert Press up or down volume key F Calling an Emergency Number Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any T circumstances, even when your phone is locked. Note: Emergency numbers vary by country. Your phones preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be C a l l i n g F e a t u r e s 57 placed due to network, environmental, or interference issues. Press 1 keypad keys 2 N D To dial the emergency number call the emergency number Viewing Recent Calls Your phone keeps a list of the calls you recently received and dialed, even if the calls did not connect. The lists are sorted from newest to oldest entries. The oldest entries are deleted as new ones are added. Shortcut: Press N to go directly to the dialed calls list from the idle display. R Find the Feature A M > Recent Calls Press 1 S 2 SELECT (+) To scroll to Received Calls or Dialed Calls select the list F T s e r u t a e F g n i l l a C 58 Press 3 S 4 N D To scroll to an entry Note: < means the call connected. call the entrys number Tip: Press and hold N for 2 seconds to send the number as DTMF tones during a call. R view entry details or VIEW (+) or M open the Last Calls Menu to perform other procedures A The Last Calls Menu can include the following options:
Option Store Delete Delete All Send Message Add Digits Attach Number Description Create a Contacts entry with the F number in the No. field. Delete the entry. Delete all entries in the list. Open a new text message with the T number in the To field. Add digits after the number. Attach a number from Contacts or or the recent call lists, after the highlighted number. C a l l i n g F e a t u r e s 59 Returning an Unanswered Call Your phone keeps a record of your unanswered calls, and displays:
Press the T (missed call) indicator D X Missed Calls, where X is the number of missed calls 1 SELECT (+) 2 S 3 N To see the received calls list select a call to return make the call R Using the Notepad Your phone stores the most recent string of digits entered on the keypad in a temporary memory location called the notepad. This can be a phone number that you called, or a number that you entered but did not call. To retrieve the number stored in the notepad:
A Find the Feature M > Recent Calls > Notepad F T s e r u t a e F g n i l l a C 60
Press N or To call the number MESSAGE (+) D M send a message to the number open the Dialing Menu to attach a number or insert a special character or STORE (+) R create a Contacts entry with the number in the No. field Attaching a Number While dialing (with digits visible in the display):
A Press M > Attach Number To attach a number from Contacts or the recent call lists F T C a l l i n g F e a t u r e s 61 Calling With Speed Dial You can assign unique speed dial numbers to as many as 9 Contacts entries (see . To speed dial a Contacts entry:
Press 1 keypad keys D 2 #
R To enter the speed dial number for the entry you want to call submit the number Note: Some networks let you skip this step for speed dial numbers 1 through 99. call the entry 3 N A Calling With 1-Touch Dial To call Contacts entries 1 through 9, just press and hold the F one-digit speed dial number for 1 second. We recommend that you reserve Contacts entry 1 (speed dial number 1) for storing and dialing your voicemail phone number. Usually, your service provider has already done this for you. If necessary, see page 80 to store your voicemail number as a Contacts entry for 1-touch T dial access. s e r u t a e F g n i l l a C 62 Using Voicemail Voicemail messages that you receive are stored on the network. To listen to your messages, you must call your voicemail phone number. Note: Your service provider may include D additional information about using this feature. Listening to Voicemail Messages M > Message Center Find the Feature
> VoiceMail K R A The phone calls your voicemail phone number. If no voicemail number is stored, your phone prompts you to store one. Shortcut: Your service provider may also store your voicemail phone number as Contacts entry number 1. If so, you can press and hold 1 to listen to your voicemail message(s). Receiving a Voicemail Message F When you receive a voicemail message, your phone displays the & (voice message waiting) indicator and a New VoiceMail notification. Press CALL (+) T To listen to the message The phone calls your voicemail phone number. If no voicemail number is stored, your phone prompts you to store one. C a l l i n g F e a t u r e s 63 Storing Your Voicemail Phone Number If necessary, use the following procedure to store your voicemail phone number on your phone. Usually, your service provider has already done this for you. M > Message Center Find the Feature D
> Settings K
> Voicemail No. Press 1 keypad keys 2 OK (+) R To enter your voicemail number store the number Your service provider additionally may store your voicemail phone number as Contacts entry number 1, so you can use 1-touch dial to listen to your voicemail messages.contact If necessary, see page 80 to store your voicemail number as a Contacts entry for 1-touch dial access. A Using Your Phone as a Speakerphone To use your phone as a speakerphone during a call, press SPEAKER (+). F T s e r u t a e F g n i l l a C 64 Muting the Phone To mute your phone during a call:
Press To open the In-Call menu D scroll to Mute mute the phone 1 M 2 S 3 OK (+) Press MUTE (+) to turn off muting. Using Call Waiting R When you are on a call, an alert tone sounds to indicate that you have received a 2nd call. Press 1 N 2 N A To answer the new call switch back to the first call F T C a l l i n g F e a t u r e s 65 Messages You can send and receive text messages, pictures, and ring tones with your wireless phone. D Setting Up the Message Inbox You must set up your message inbox before you can send and receive messages. Note: Usually, your service provider has already set up the message inbox for you. Find the Feature R M > Message Center
> Settings K A
> Msg Inbox Setup To set up the message inbox, you must configure the following option:
Option Msg Alert Multimedia Msg Setup Direct View Description F specify whether your phone plays an alert when a message is received set options for message size limits, how long messages are stored, type of reply, and other options specify whether messages are displayed when received T M e s s a g e s 65 Sending a Text Message You can send a text message to 1 or more recipients. When you enter phone numbers and/or email addresses, you must insert a space between D each entry. Press S to the right to insert a space. Shortcut: Enter a phone number in the idle display, then press M > Send Message to open a new text message with the number in the To field. Go to step 4 to continue. Sending a Short Message Find the Feature R
> Create (+)
> Short Message A M > Message Center Action 1 Enter message text. Press M to open the Short Message Menu (see table below for menu options). 2 Press NEXT (+) to go to the Send To: screen. F T s e g a s s e M 66 3 Scroll to the desired entry from your Contacts list Action and press K. or D Add a new contact:
a Scroll to [New Contact] and press K. b Scroll to and select Phone Number or Email Address. c Enter and store 1 or more phone numbers and/or email addresses. R 4 Press NEXT (+) go to the Send screen, and make the desired entries:
Subject:Type the subject and press OK (+). A Cc:Press K to begin entering message copy recipient(s). BCC: Press K to begin entering recipient(s) of message copy who are not to be known to other recipient(s). Priority:Set to Normal or Urgent. Read Reply:
Receipt:Specify whether you want to receive an indication that message is delivered. Attachment:Press K to begin adding a picture, animation, or sound. F T 5 Press SEND (+) to send the message. M e s s a g e s 67 The Short Messages Menu includes these options:
Option Insert R Description select and insert:
Text Templatespre-written text D messages (for example, Call me at ...) You can also create new Text Templates. Picturesprestored pictures or animations Soundsprestored sounds select Numeric, Symbol, Primary, or Secondary (see page 38) A select TAP or iTAP (see page 38) delete text copy text paste text that was copied F previously apply formatting options to text Entry Mode Entry Setup Cut Copy Paste Format Text T s e g a s s e M 68 Sending a Multimedia Message Find the Feature M > Message Center
> Create (+)
> Multimedia Message Action D 1 Type the message. 2 When you want to insert a media element, press M. 3 Scroll to Insert and press SELECT (+), or press K. See the table following these steps for a list of media elements that you can insert. R 4 After you insert a media element, Press NEXT (+) to go to the Send To: screen. 5 Scroll to the desired entry from your Contacts list A and press K. or F Add a new contact:
a Scroll to [New Contact] and press K. b Scroll to and select Phone Number or Email Address. c Enter and store 1 or more phone numbers and/or email addresses. T M e s s a g e s 69 Action 6 Press NEXT (+) go to the Send screen, and make the desired entries:
Subject:Type the subject and press OK (+). Cc:Press K to begin entering message copy D recipient(s). BCC: Press K to begin entering recipient(s) of message copy who are not to be known to other recipient(s). Priority:Set to Normal or Urgent. Read Reply:
Receipt:Specify whether you want to receive an indication that message is delivered. A Attach:Press K to begin adding a picture, animation, or sound. R 7 Press SEND (+) to send the message. F T s e g a s s e M 70 The Multimedia Message Menu includes these options:
Option Insert D R Description select and insert:
Pictureprestored picture or animation Soundprestored sound Voice Memostored voice memo New Picturea photo that you take while composing the message New Voice Memoa Voice Memo that you record while composing the message New Pagean additional message A page New Templatepre-written messages that may contain both text animation and/or sound F You can also create new Text Templates. select Numeric, Symbol, Primary, or Secondary (see page 38) select TAP or iTAP (see page 38) delete text copy text T Entry Mode Entry Setup Cut Copy M e s s a g e s 71 Option Paste Format Text Description paste text that was copied previously apply formatting options to text D Viewing the Status of Sent Text Messages Text messages that you send are stored in the outbox. Find the Feature M > Message Center R
> Outbox > K Messages in the outbox are sorted from newest to oldest. The following indicators show message status:
= sending in progress A m = sending failed Receiving a Text Message Y = sent F When you receive a text message, your phone displays the X (message waiting) indicator and a New Inbox Message notification, and sounds an alert. If you receive a picture, your phone displays a New Picture Received notification. Press READ (+) T To open the message s e g a s s e M 72 D If reminders are turned on, your phone sends a reminder at regular intervals until you close the new message notification, read the message, or turn off your phone. When your phone displays Memory is Full!, you must delete some existing messages from your inbox, outbox, or drafts folder to receive new messages. Reading, Locking, or Deleting a Text Message Messages in the text message inbox are sorted from newest to oldest. The oldest messages are deleted automatically as specified by the inbox cleanup setting. If you want to save a message, you should lock it to prevent it from being deleted during cleanup. Find the Feature R A M > Message Center
> Msg Inbox >K F T M e s s a g e s 73 1 S Press To scroll to the message The following indicators show message status:
Y = unread D
= unread (with attachment) d = unread and urgent
= unread and urgent
(with attachment) R n = read
= read (with attachment) f = read and locked
= read and locked
(with attachment) 2 READ (+) 3 BACK (-) A open the message close the message or DELETE (+) or M delete the message F open the Inbox Menu to perform other procedures T s e g a s s e M 74 The Inbox Menu can include the following options:
Option Create Message Call Back D R Description Open a new text message. Call the number in the message header or embedded in the message. Launch the micro-browser and go to a Web address (URL) embedded in the message. Open a new text message, with the senders Reply To number or email address in the To field. Open a copy of the text message, with an empty To field. A Display a list of items that can be stored, including the senders number or email address, and a selected image or sound file. Play a ring tone in the message. F Lock or unlock the message
(move the message to the Safebox). Delete the message. Delete all inbox messages. Open the text message inbox setup menu. T Go To Reply Forward Store Play Lock/Unlock Delete Delete All Inbox Setup M e s s a g e s 75 Downloading Pictures and Ring Tones Text messages that you receive can contain pictures, animations, and ring tones. Pictures and animations are displayed as you read the message. A ring tone begins playing when you D scroll to or select the (sound file) indicator. You can store these embedded object files on your phone, and use them as screen saver images, wallpaper images, and event alerts. Storing a Picture or Animation File R Press 1 S up or down 2 M 3 S 4 SELECT (+) 5 S 6 SELECT (+) 7 STORE (+) 8 S 9 SELECT (+) F To highlight the picture or A animation in the message open the Text Msg Menu scroll to Store display a list of items you can store scroll to File Attachment display the file name view storage options T scroll to Store Only, Set as Screen Saver, or Set as Wallpaper store the file and, optionally, set it as your screen saver or wallpaper image s e g a s s e M 76 Note: When you set an animation as a wallpaper image, only the first frame of the animation displays. For more information about using pictures and animations, see pages 76 and 134. Storing a Ring Tone You can store a ring tone on your phone, and use it as an event alert. D Press 1 S up or down R 2 M 3 S 4 SELECT (+) 5 S 6 SELECT (+) 7 STORE (+) 8 S 9 SELECT (+) To highlight the (sound file) indicator in the message open the Text Msg Menu scroll to Store display a list of items you can A store scroll to File Attachment display the file name view storage options scroll to Store Only or F Set As Ring Tone select the option If you select Store Only, go to step 13. If you select Set As Ring Tone, your phone displays Set As Which?, and lists the events for which you can set an alert. T M e s s a g e s 77 Press 10 S 11 SELECT (+) 12 keypad keys 13 OK (+) To scroll to the event select the event enter a name for the ring tone store the ring tone and, optionally, set it as the event alert D For more information about using ring tones, see pages 77 and 88. R A F T s e g a s s e M 78 Setting Up Your Contacts D You can store a list of names and phone numbers or email addresses in your phones electronic Contacts list. To see the names in Contacts, press M > Contacts from the idle display. Scroll to an name and press VIEW (+) to view details of the entry for that name as shown below. R Viewing Entry Details Phonebook A Phone number
& email address Carlo Emrys
$5558579 xemail@email.com F Send a message to the entry. BACK e MESSAGE Return to list T Press M to open Phonebook menu. Entrys Name Type indicator shows number type:
$ Work U Home S Main h Mobile Z Fax p Pager
[ Email S e t t i n g U p Y o u r C o n t a c t s Note: When you set a distinctive ringer alert for an entry, the Ringer ID setting appears below the speed dial number. 79 Creating a Contacts Entry Entering Information To create or edit a Contacts entry:
D Find the Feature M > Contacts
> [Create New Contact]
> Phone Number or Email Address Shortcut: Enter a phone number in the idle display, then press STORE (+) to create a Contacts entry with the number in the No. field. R Action 1 Enter the desired information for the entry. See the table following these steps for a description of the information types you can enter. Note: A phone number or email address is required for a Contacts entry. All other information is optional. A 2 When you have entered all information for the F entry, press DONE (-) to store the entry. s t c a t n o C r u o Y p U g n i t t e S T 80 You can enter the following information for a Contacts entry. D No. or Email Option Name Type Voice Name Ringer ID Picture Add Phone No. Add Email address R Description entry name Tip: Press M to select a text entry mode (see page 39). entrys phone number or email address (maximum 32 characters) entry type Note: This option is not available for email entries. record a voice name for the entry select to set a distinctive ringer alert for the phone number Your phone uses the alert to notify you when you receive a call from this phone number. To activate ringer IDs, see page 88. select a picture to display when F you select the entry add another phone number for the same entry You must use a different Type T identifier for each number. add another email address for the same entry A S e t t i n g U p Y o u r C o n t a c t s 81 Assigning a Speed Dial Number You can assign a speed dial number to a Contacts entry or to any other number that you enter. A speed dial number allows you call an entry by pressing a single key Action M > Contacts Find the Feature D 1 Press M to open the Contacts menu. 2 Scroll to Speed Dial Nos.. 3 Press SELECT (+). 4 Scroll to the speed dial number (1 through 9) you R want to assign. 5 If you selected a speed dial number that is not assigned, press ASSIGN (+) or K. A or s t c a t n o C r u o Y p U g n i t t e S If you selected a speed dial number that is already assigned, press CHANGE (+) or K. F T 82 Action 6 Scroll to Assign number and press SELECT (+) to or assign the speed dial number to the most recent Contacts entry. D Scroll to Find No. and press SELECT (+) to view Contacts and assign the speed dial number to any entry. or R Scroll to Enter No. and press SELECT (+) to enter a new number and assign the speed dial number to it. 7 Press EXIT (+). A Storing a PIN Code With a Phone Number You can store a PIN code with the phone number for calls that require additional digits (for example, to make a F calling card call, or to retrieve voicemail or answering machine messages). Insert 1 or more of the following S e t t i n g U p Y o u r C o n t a c t s T 83 characters in the dialing sequence to ensure that the number dials and connects properly:
Press M > Insert Pause D M > Insert Wait R To insert a p (pause) character Your phone dials the preceding digits, waits for the call to connect, then sends the remaining digit(s). insert a w (wait) character Your phone dials the preceding digits, waits for the call to connect, then prompts you for confirmation before it sends the remaining digit(s). insert an n (number) character Your phone prompts you for a number before dialing the call. The number you enter is inserted into the dialing F sequence in place of the n character M > Insert 'n'
A s t c a t n o C r u o Y p U g n i t t e S Note: You can store a maximum of 32 digits per number. T Each character counts as 1 digit. 84 Recording a Voice Name For a Contact You can record a voice name for a new or existing Contacts entry. A voice name lets you call the Contacts entry using voice dial. Tip: Make your recording in a quiet location. Hold the phone about 4 inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice. Find the Feature D M > Contacts R Action 1 Press S to scroll to the entry. 2 Press VIEW (+) to view entry details. 3 Press M to open the Phonebook menu. 4 Scroll to Edit Contact and press SELECT (+) to begin A editing the contact. 5 Press S to scroll to Voice Name:. 6 Press RECORD (+) to begin recording. F 7 Press and release the voice key and say the entrys name (in 2 seconds) to record the voice name 8 When prompted, press and release the voice key T and repeat the name. 9 Press DONE (-) to store the voice name. S e t t i n g U p Y o u r C o n t a c t s 85 s t c a t n o C r u o Y p U g n i t t e S Dialing a Contacts Entry Use one of the following procedures to call a number
(or send a text message to an email address) stored in Contacts. D Contacts Find the Feature M > Contacts Press 1 keypad key letter R To jump to entries that begin with that letter (optional) scroll to the entry make the call 2 S 3 N A Voice Dial Press and release the voice key and say the entrys voice name (in 2 seconds). Storing Longer Numbers A Contacts number can contain a maximum of 32 digits and characters. You can create multiple Contacts entries to store a dialing sequence that exceeds the 32-character limit. Then you can send the entries in sequence to dial the T number. F 86 To store a dialing sequence longer than 32 characters:
Action 1 Create a Contacts entry to store the first part of the dialing sequence (for example, the number for your long-distance service provider). D 2 Create a 2nd Contacts entry to store the next part of the dialing sequence (for example, the country code and phone number for an international call). 3 Repeat step 2 as necessary to store the entire R dialing sequence. (For example, create a 3rd Contacts entry to store your calling card number and PIN number.) To dial a dialing sequence stored as multiple Contacts entries:
A S e t t i n g U p Y o u r C o n t a c t s Action 1 Dial the 1st Contacts entry. Perform any pause or wait tasks, if necessary, to complete the dialing F sequence. Your phone returns to the idle display. 2 Press M > Contacts to re-open Contacts. 3 Highlight the 2nd Contacts entry, then press M > Send Tones to send the next portion of the dialing sequence. T 4 Repeat steps 2 and 3 as necessary to send the entire dialing sequence. 87 Editing a Contacts Entry Find the Feature M > Contacts Press 1 S D 2 VIEW (+) 3 M 4 S 5 SELECT (+) To scroll to the entry view entry details open the Phonebook menu scroll to Edit Contact edit the entry R Edit the entry information described on page 80. Tip: Press M to open the Phonebook menu to perform various operations on the selected entry. A Deleting a Contacts Entry M > Contacts Find the Feature s t c a t n o C r u o Y p U g n i t t e S Press 1 S 2 M 3 S 4 SELECT (+) 5 YES (-) To scroll to the entry F open the Phonebook menu scroll to Delete Contact delete the entry T confirm the deletion Sorting the Contacts List You can sort Contacts by name, email address, or voice name. 88 Note: The voice name sort is identical to the name sort, except that entries with voice name tags appear first. Find the Feature M > Contacts Press 1 M 2 S 3 SELECT (+) 4 S right or left 5 CHANGE (+) D To open the Contacts menu scroll to Contacts Setup select Contacts Setup select to sort by Name or Email select to change the sort R order select Name or Email select the sort order 6 S 7 CHANGE (+) A F S e t t i n g U p Y o u r C o n t a c t s T 89 Personalizing Your Phone D Personalizing a Ring Style You can change the alerts that notify you of the following events: incoming calls, text messages, voicemail messages, Information Services messages, alarms, data calls, fax calls, and reminders. Any changes you make are saved to the current ring style. R Find the Feature M > Alert Styles
> Style Detail Note: Style represents the current ring style. A Press 1 S 2 CHANGE (+) 3 S 4 SELECT (+) To scroll to the event begin changing the event scroll to the alert you want select the alert F Activating Ringer IDs When ringer IDs are turned on, your phone uses distinctive ring tones to notify you of incoming calls or messages from specific entries stored in Contacts. T e n o h P r u o Y g n i z i l a n o s r e P 88 Note: To assign a ringer ID to a new or existing Contacts entry, see page 80. Find the Feature M > Alert Styles > Style Detail
> Ringer ID Note: Style represents the current ring style. D Press 1 CHANGE (+) 2 S 3 SELECT (+) To begin changing Ringer ID scroll to On or Off select the option R Setting Keypad Volume M > Alert Styles Find the Feature Note: Style represents the current ring style. A
> Style Detail >Key Volume Press 1 CHANGE (+) 2 S left or right 3 OK (+) To begin changing Key Volume scroll to the desired volume F store the change Setting Reminders T A reminder is an alert that rings or vibrates at regular intervals to notify you about a voicemail or text message that you have received. Find the Feature M > Alert Styles > Style Detail
> Reminder P e r s o n a l i z i n g Y o u r P h o n e 89 Note: Style represents the current ring style. Press 1 CHANGE (+) 2 S D 3 OK (+) To begin changing Reminder scroll to Beep or Vibrate to set the reminder alert type, or Off to turn off all reminders select the reminder alert Personalizing Display Text R To change the greeting that appears when you turn on your phone:
Find the Feature M > Settings > Personalize A
> Greeting You can change the banner in the idle display:
Find the Feature M > Settings > Personalize F
> Banner Setting the Menu View You can set your phone to display the main menu as graphic icons (the default setting) or as a text-based list. T M > Settings > Personalize Find the Feature
> Main Menu > View e n o h P r u o Y g n i z i l a n o s r e P 90 Press 1 CHANGE (+) 2 S 3 CHANGE (+) To begin changing the menu view scroll to Icons or List select the menu view D Personalizing the Menu You can reorder the items in your phones main menu. Note: You cannot alter the location of the More (f) graphic icon. This icon remains in the introductory menu display to provide access to additional menu features. Find the Feature R M > Settings > Personalize
> Main Menu > Reorder A Press 1 S 2 GRAB (+) 3 S 4 INSERT (+) To scroll to a menu item grab the menu item move the item to a new F location in the menu insert the menu item T P e r s o n a l i z i n g Y o u r P h o n e 91 Personalizing Soft Keys and Menu Icons You can change the menu feature icons and soft key labels (left - and right +) that appear in the idle display, to access different main menu items from the idle display. D Find the Feature M > Settings > Personalize
> Home Keys Press 1 S R To scroll to Scroll Up, Scroll Down, Scroll Left, Scroll Right, Left Soft Key, Right Soft Key, or Smart Key begin changing the key setting scroll to a menu feature to assign to the key confirm the new setting A 2 CHANGE (+) 3 S 4 SELECT (+) Setting the Menu Language F Set the language in which menu features and options are displayed. Find the Feature M > Settings > Initial Setup T
> Language e n o h P r u o Y g n i z i l a n o s r e P 92 Setting Menu Scroll Behavior Set the highlight bar to stop or wrap around when you reach the top or bottom of a menu list. Find the Feature M > Settings > Initial Setup
> Scroll D Resetting All Options Reset all options back to their original factory settings, except for the unlock code, security code, and lifetime timer. Find the Feature R
> Master Reset M > Settings > Initial Setup A Clearing All Stored Information Reset all options back to their original factory settings, except for the unlock code, security code, and lifetime timer, erase all downloaded pictures, animations, and sound files, and clear all user settings and entries. F Caution: Master clear erases all user-downloaded content and user-entered information stored in your phones memory, including Contacts and datebook entries. Once you erase the information, it cannot be recovered. T Find the Feature
> Master Clear M > Settings > Initial Setup P e r s o n a l i z i n g Y o u r P h o n e 93 Creating and Using Shortcuts Your phone includes several standard shortcuts. You can create additional custom shortcuts to frequently used menu items. Standard Shortcuts The following shortcuts are pre-programmed on your phone. You cannot edit or delete these shortcuts. D Task Change your phones ringer alert setting. R Shortcut Open the flip, then press the down volume key to the lowest volume setting, then vibrate, then silent call alert. Press the up volume key repeatedly to reset ring alert. From the idle display, press K #. A Display your phone number. Go to the dialed calls list. From the idle display, F press N. Press O. Exit the menu system. T Creating a Shortcut You can create a keypad shortcut plus an optional voice shortcut to a menu item. A voice shortcut takes you directly to the menu item when you say the shortcut name. e n o h P r u o Y g n i z i l a n o s r e P 94 Tip: Make your recording in a quiet location. Hold the phone about 4 inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice. Action D 1 Press M to enter the menu system. 2 Press S to scroll to the menu item. 3 Press and hold M to open the shortcut editor. 4 Press YES (-) to view shortcut options. 5 Press CHANGE (+) to change the keypad shortcut R number. or Press DONE (-) to select the default number. or A Assign a voice shortcut:
a Press S to scroll to Voice. b Press K to begin recording. c Press and release the voice key, and say F the shortcuts name (within 2 seconds) to record the shortcut name. d When prompted, press and release the voice key and repeat the name. 6 Press DONE (-) to store the shortcut name T P e r s o n a l i z i n g Y o u r P h o n e 95 Using a Keypad Shortcut Press To open the main menu go to the menu item with that shortcut number 1 K 2 a number key D Selecting a Shortcut From the List Find the Feature M > More > Shortcuts
> shortcut name R Using a Voice Shortcut Action 1 Press M to open the menu 2 Press and release the voice key and say the A shortcuts name (within 2 seconds) to go to the menu item with that shortcut name Editing or Deleting a Shortcut F The shortcut list is sorted by key. If you change a shortcuts key, you change its place in the list. Find the Feature Press 1 S 2 M M > More > Shortcuts T To scroll to the shortcut open the Shortcuts menu to perform procedures as described in the following list e n o h P r u o Y g n i z i l a n o s r e P 96 The Shortcuts menu can include the following options:
Option Edit Reorder List Delete Delete All D Description Edit the shortcut. Tip: Use this option to delete the associated voice shortcut. Change the shortcut list order. Delete the shortcut. Delete all shortcuts. R A F T P e r s o n a l i z i n g Y o u r P h o n e 97 Getting More Out Of Your Phone Making a 3-Way Call D During a call, you can call and connect a 3rd party for a 3-way call. You cannot do this if you already have a call on hold. R Press 1 keypad keys To dial the 3rd partys number Note: Some networks may require you to press N first. call the number 2 N 3 N 4 O A connect the 2 calls end the entire call F Restricting Calls You can stop all incoming and/or outgoing calls, or you can restrict outgoing calls to the numbers stored in Contacts. T M > Settings > Security Find the Feature
> Restrict Calls Press 1 keypad keys 2 OK (+) To enter your unlock code open the restrict calls menu e n o h P r u o Y f O t u O e r o M g n i t t e G 98 Press 3 S 4 CHANGE (+) 5 CHANGE (+) 6 S 7 SELECT (+) To scroll to Outgoing Calls or Incoming Calls select the option change the Allow setting scroll to All, None, or Contacts select the allowed calls D Notes:
You can make emergency calls when outgoing calls R are restricted.
Your phone still receives incoming text messages when incoming calls are restricted. A Tip: Contacts is not locked when you restrict outgoing calls to numbers stored in Contacts. To prevent a user from adding (and then calling) a new Contacts entry, you may want to lock Contacts. See page 131. TTY Operation F You can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phones headset jack and set the phone to operate in one of three TTY T modes. Notes:
Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY device to your phone. G e t t i n g M o r e O u t O f Y o u r P h o n e 99
Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as necessary to minimize the error rate.
For optimal performance, your phone should be at D least 12 inches (30 centimeters) away from the TTY device. Placing the phone too close to the TTY device may cause high error rates. Setting TTY Mode When you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected. R Find the Feature M > Settings > Initial Setup
> TTY Setup A To begin changing TTY Setup scroll to the TTY mode select the TTY mode Press 1 CHANGE (+) 2 S 3 SELECT (+) F The TTY Setup menu can include the following options:
Option Voice TTY VCO HCO Description Return to normal voice mode T Transmit and receive TTY characters Receive TTY characters but transmit by speaking into the microphone Transmit TTY characters but receive by listening to the earpiece e n o h P r u o Y f O t u O e r o M g n i t t e G 100 When your phone is in a TTY mode, the international TTY symbol and the mode setting are shown in the display during an active digital TTY call. You can press TTYMODE (-) to change the mode setting. Switching to TTY Mode During a Voice Call D Press 1 M 2 S 3 SELECT (+) 4 CHANGE (+) 5 S 6 SELECT (+) To open the Call menu scroll to TTY Setup display the TTY Setup menu R begin changing TTY Setup scroll to the TTY mode select the TTY mode A Returning to Voice Mode To return to normal voice mode, select Voice from the TTY Setup menu as described on page 100. Setting Auto PIN Dial F Some networks require an authenticating PIN code to allow outgoing calls. Use this feature to automatically dial your PIN. Find the Feature M > Settings > Initial Setup T
> Auto PIN Dial G e t t i n g M o r e O u t O f Y o u r P h o n e 101 Using DTMF Tones You can send a number to the network as dual tone multi-frequency (DTMF) tones during a call. Use DTMF tones to communicate with automated systems that require you to submit a PIN code or credit card number. D Activating DTMF Tones You can set DTMF tones to Long, Short, or Off:
Find the Feature M > Settings > Initial Setup
> DTMF R Short sends a short fixed-duration tone for each keypress. Long sends each tone for as long as you depress the key. Short DTMF tones work with most automated systems. Some systems (such as home answering machines) may require long tones for proper activation. Sending DTMF Tones A F Using the Keypad Press the number keys to send the numbers as DTMF tones during a call. To send numbers as long tones, make sure that DTMF is set to Long. During a call, enter any single short keypress to put the phone in DTMF mode, then send the required T numbers by pressing and holding each key in turn. e n o h P r u o Y f O t u O e r o M g n i t t e G 102 Sending Stored Numbers During a call, highlight a number in Contacts or the recent call lists, then:
Press D 1 M 2 S 3 SELECT (+) To open the sub-menu scroll to Send Tones send number as DTMF tones Monitoring Phone Use R Viewing and Resetting Call Timers Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing O. This time includes busy signals and ringing. The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider. For billing information, please contact your service provider directly. A F To view a call timer:
T Find the Feature M > Recent Calls > Call Times G e t t i n g M o r e O u t O f Y o u r P h o n e 103 Select one of the following options:
Option Last Call D Dialed Calls Description Approximate time spent on last dialed or received call. You cannot reset this timer. Approximate time spent on dialed calls since the last time you reset this timer. Approximate time spent on received calls since the last time you reset this timer. Approximate time spent on dialed and received calls since the last time you reset this timer. Approximate time spent on all calls on this phone. You cannot reset this timer. A R Received Calls All Calls Lifetime To reset the call timer:
Press 1 RESET (+) 2 YES (-) F To reset the time (if available) confirm the reset T Using a Timer During a Call You can set a timer to beep at selected intervals during a call, and display the elapsed time during a call. Find the Feature M > Settings > In-Call Setup
> In-Call Timer e n o h P r u o Y f O t u O e r o M g n i t t e G 104 Select one of the following Beep options:
Timer Beep Set the timer to On or Off. If set to On, the elapsed time displays during a call. Select 60 seconds (beep sounds every 60 seconds) or Off (no in-
call beep). D Using Handsfree Features R You can purchase an optional Motorola Original handsfree car kit, speakerphone, or headset for your phone. These accessories provide alternative ways for you to use your phone without using A your hands. Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. Activating a Connected Speakerphone F To use an external speakerphone with your phone, connect the speakerphone and, during an active call:
Press SPEAKER (+) (if available) or M > Spkrphone On To T activate the connected speakerphone G e t t i n g M o r e O u t O f Y o u r P h o n e 105 Automatic Answer You can set your phone to automatically answer calls after 2 rings (4 seconds) when connected to a car kit, speakerphone, or headset. Find the Feature D M > Settings > More
> Car Settings or Headset Press R 1 S 2 CHANGE (+) 3 S left or right 4 SELECT (+) To scroll to Auto Answer begin changing Auto Answer scroll to On or Off confirm the setting Automatic Handsfree You can set your phone to automatically route calls to a A car kit when it detects a connection. Find the Feature M > Settings > More F
> Car Settings
> Auto Handsfree Press 1 CHANGE (+) 2 S 3 SELECT (+) To begin changing Auto Handsfree scroll to On or Off T confirm the setting e n o h P r u o Y f O t u O e r o M g n i t t e G 106 Power-Off Delay When your phone is connected to a car kit, you can set it to stay on for a period of time after you switch off the ignition. This prevents the phone from draining your vehicle battery, but leaves the phone on long enough that you do not have to re-enter your unlock code when making short stops. Find the Feature D M > Settings > More Press 1 CHANGE (+) 2 S 3 SELECT (+)
> Car Settings
> Power-off Delay R To begin changing Power-off Delay scroll to the time delay confirm your selection A F Note: This feature may not work with all car ignition switches. Caution: If you select Continuous, the phone does not power off when you turn off the ignition. Be careful not to drain your vehicle battery if you select this option. Charger Time When your phone is connected to a car kit, you can set it T to charge itself for a specified time period after you switch off the ignition. This helps ensure that the phone battery gets fully charged while the vehicle is parked. M > Settings > More Find the Feature
> Car Settings > Charger Time G e t t i n g M o r e O u t O f Y o u r P h o n e 107 To begin changing Charger Time scroll to the charge time confirm your selection Press 1 CHANGE (+) 2 S 3 SELECT (+) D Note: This feature may not work with all car ignition switches. Making Data and Fax Calls R An optional Motorola Original data kit (which includes a cable connector) lets you transfer data between your phone and a computer, Palm OS compatible device, or Microsoft Windows CE, Pocket PC, or Handheld PC device. You can:
Synchronize Contacts and datebook information between your phone and a computer or PDA. A
Use your phone as a modem to connect to the Internet.
Use your phone to send and receive data and fax F calls on your computer or hand-held device. Making a Cable Connection Installing the Software T To transfer data between your phone and computer, you must install the software included with the Motorola Original data kit. See the data kits user guide for more information. e n o h P r u o Y f O t u O e r o M g n i t t e G 108 Attaching the Cable Use a Motorola Original serial cable or Motorola Original USB cable to connect your phone to the external device. Note: Not all devices are compatible with a cable connection. Check your computer or hand-held device to determine the type of cable you need. Serial Cable D Action R 1 Plug the serial cable into the detachable head. Make sure that the Motorola logo on the detachable head and the metal shielding on the serial cable plug are both facing you. A 2 With the Motorola logo and the phone both facing you, plug the detachable head into the phones accessory connector port. F 3 Plug the other end of the cable into the serial interface connection on the device and tighten the screws, if present. T G e t t i n g M o r e O u t O f Y o u r P h o n e 109 USB Cable Action 1 Plug the end of the cable with the Motorola logo into the phones accessory connector port. Make sure that the logo and the phone are both facing you. D 2 Plug the other endthe USB connectioninto the USB port on the external device. Synchronizing Data You can synchronize Contacts and datebook information between your phone, computer, and PDA with Starfish R TrueSync software, an accessory for Motorola phones. See the TrueSync user guide for more information. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. A F T e n o h P r u o Y f O t u O e r o M g n i t t e G 110 Sending a Data or Fax Call Use this procedure to send data or a fax from a connected computer or hand-held device. Action 1 Make sure that the phone is connected and D powered on. 2 Open the application (such as dial-up-networking or fax) on your computer, and place the call through the application. Note: You cannot dial data or fax numbers through your phones keypad. You must dial them through your computer. R 3 When the transfer is complete, end the call from the connected device to close the connection. A Receiving a Data or Fax Call Use this procedure to transfer data or a fax to a connected computer or hand-held device. Setting Up Your Phone Find the Feature F M > Settings > Connection
> Incoming Call T Action 1 Press CHANGE (+) to select Next Call. 2 Press S to scroll to Data In Only or Fax In Only. G e t t i n g M o r e O u t O f Y o u r P h o n e 111 Action 3 Press SELECT (+) to set the call format 4 Connect your phone to the device to enable the data or fax transfer D Note: You cannot answer incoming voice calls when your phone is in data or fax mode. Any voice calls you receive are treated as unanswered calls. To return a voice call, reset your phone to normal voice operation as described below. Transferring the Data or Fax Your phone notifies you when the data or fax call arrives, and transfers the call to the connected device. Use the application running on the device to answer the call. Ending the Data/Fax Connection When the data or fax transfer is complete, end the call R A from the connected device to close the connection. Resetting Normal Voice Operation After making a data or fax call, you must reset your phone to resume normal voice operation. F Find the Feature M > Settings > Connection
> Incoming Call > Next Call T
> Normal Your phone also reverts to normal voice operation when you turn it off and then turn it back on. e n o h P r u o Y f O t u O e r o M g n i t t e G 112 Adjusting Network Settings Your service provider registers your phone to its network. In some situations, such as using the phone as a modem or connecting it to a TTY device, you may need to change the network D registration. Note: Some settings and/or options described in this section may not be available for all phone models. Viewing Current Registered Network Find the Feature R
> Network
> Current Network M > Settings > More A Press VIEW (+) to display the network ID. Setting Analog Only You can set your phone to place calls only on analog channels. Note: This feature may appear as an option on the Set Mode menu (see following section). Find the Feature F M > Settings > More Press 1 CHANGE (+) 2 S 3 SELECT (+)
> Network > Analog Only T To begin changing the setting for Analog Only scroll to On or Off select the option G e t t i n g M o r e O u t O f Y o u r P h o n e 113 Setting Network Search Mode Set how your phone searches for a network connection. Find the Feature M > Settings > More
> Network > Set Mode Press D 1 CHANGE (+) To begin changing the setting for Set Modes scroll to an option described in the list below select the option 2 S 3 SELECT (+) R Network search mode options:
Option Home Only Automatic A Automatic B A Description match the Home SID search automatically based on priority search automatically based on priority F Setting Service Tones You can set your phone to beep each time the network T registration status changes. M > Settings > More Find the Feature
> Network > Service Tone e n o h P r u o Y f O t u O e r o M g n i t t e G 114 Press 1 CHANGE (+) 2 S 3 SELECT (+) To begin changing the setting for Service Tones scroll to On or Off select the option D Setting Call Drop Alert You can set your phone to emit an alert tone whenever the network drops a call. Because digital networks are so quiet, the call drop alert may be your only indication that a call has been dropped. Find the Feature R M > Settings > More
> Network > Call Drop Tone Press 1 CHANGE (+) 2 S 3 SELECT (+) A To begin changing the setting for Call Drop Tones scroll to On or Off select the option F Monitoring Battery Charge To view a detailed battery charge meter:
Find the Feature M > Settings > Phone Status T
> Battery Meter G e t t i n g M o r e O u t O f Y o u r P h o n e 115 Viewing Phone Specifications To view your phones feature specifications:
Find the Feature D M > Settings > Phone Status
> Other Information R A F T e n o h P r u o Y f O t u O e r o M g n i t t e G 116 Personal Organizer D Datebook The datebook is a calendar that you can use to schedule and organize events such as appointments and meetings. Note: You must set the correct time and date to use the datebook. To schedule or review datebook events:
Find the Feature R
> Datebook M > More > Office Tools Month View The datebook initially displays a calendar for the month. A black triangle in a date box indicates a scheduled event. A Month (Press
* for prior month, # for next month.) Exit datebook. Days of Week F
(Press S left 2 or right to 9 select.) 1 8
* Sep 2003 #
S S M T W T F 5 3 31 4 6 7 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 3 4 28 29 30 5 10 11 7 EXIT VIEW 1 8 e 6 Press M to open Datebook Menu. 2 T 9 Go to selected day. P e r s o n a l O r g a n i z e r 117 Day View Select a day and press VIEW (+) to see the days events. Wed 17-Sep Date Titles of Events D 1:00 A Staff Meeting 3:30 Dr. Appt
[New Event]
Return to previous screen. R View event BACK details. Press M to open Datebook Menu. VIEW e r e z i n a g r O l a n o s r e P Event View Select an event and press VIEW (+) to see event details. A Wed 1:00pm Day and Start Time of Event Joe's Birthday F Staff Meeting
(2 hours) Event A 5 min before Repetition none T Show event BACK details. Press M to open Datebook Menu. EDIT e Event Title Event Duration Reminder Alert Return to previous screen. 118 Adding a Datebook Event A title is required for a datebook event. All other information is optional. Notes:
D
You must create an event to use the reminder alarm.
Your phone must be turned on for the reminder alarm to sound. Find the Feature M > More > Office Tools
> Datebook > day R M> New Event Press 1 CHANGE (+) 2 keypad keys 3 OK (+) 4 S 5 DONE (-) A To select Title enter a title for the event Tip: Press M to select a text entry mode. See page 39. store the event title scroll to other fields and enter information as necessary F You can set start time, duration, date, repeat interval, and reminder alarm. store the event T P e r s o n a l O r g a n i z e r 119 Changing Event Information Find the Feature M > More > Office Tools
> Datebook Press D 1 S 2 VIEW (+) 3 S 4 VIEW (+) 5 EDIT (+) 6 S R To scroll to the day display the day view scroll to the event display the event view edit the event scroll to the information you want to change edit the information enter new information store the information 7 CHANGE (+) 8 keypad keys 9 DONE (-) A Copying an Event Find the Feature M > More > Office Tools F
> Datebook r e z i n a g r O l a n o s r e P Press 1 S 2 VIEW (+) 3 S 4 M 5 S 6 SELECT (+) To scroll to the day display the day view T scroll to the event open the Datebook Menu scroll to Copy copy the event 120 Press 7 YES (-) To confirm the copy Your phone assumes you want to change the date, and displays the Date field. enter date information move to month, day, and year D 8 keypad keys 9 } (+) or S to the right 10 DONE (-) 11 S 12 DONE (-) R save the copy of the event scroll to and edit event information, if necessary store the information Deleting an Event Find the Feature A M > More > Office Tools
> Datebook Press 1 S 2 VIEW (+) 3 S 4 M 5 S 6 SELECT (+) 7 YES (-) To scroll to the day F display the day view scroll to the event open the Datebook Menu scroll to Delete select Delete confirm the deletion T P e r s o n a l O r g a n i z e r 121 r e z i n a g r O l a n o s r e P Viewing and Dismissing an Event Reminder When you set a reminder alarm for an event, the phone displays an event reminder and sounds a reminder alarm. To view or dismiss an event reminder:
D Press VIEW (+) To view the event Press S to scroll through the event details. or EXIT (-) R dismiss the reminder If you have more than one event set up for the same time, the phone displays each event in sequence. As you view and dismiss each event reminder, the next one is displayed. Changing the Datebook Setup A You can change the datebooks daily start time, and set the length of time that events are stored. F M > More > Office Tools
> Datebook M > Setup Synchronizing with TrueSync Software Find the Feature T You can synchronize datebook entries between your phone and computer or hand-held device with Starfish TrueSync software, an accessory for Motorola phones. See the TrueSync user guide for more information. 122 Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. Voice Memos D You can use the voice memo feature to record personal messages and phone calls on your phone. Recording a Voice Memo Use this procedure to record a voice memo from the idle display, or to record a phone call in progress. When recording a phone call, only the incoming voice is recorded. Your phone plays an alert tone to notify the other party that the call is being recorded. Note: Recording phone calls is subject to varying state and federal laws regarding privacy and recording of conversations. Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal F tone of voice. R A Action 1 Press and hold the voice key. The phone sounds T an alert tone and begins recording. 2 Speak your voice memo. 3 Release the voice key to stop recording. P e r s o n a l O r g a n i z e r 123 Viewing the Voice Memos List Find the Feature M > More > Voice Memos Voice Memos Locked Voice Note D f 2)17:50pm 09/09/03 1)10:30am 09/17/03.
[New Voice Memo]
R EXIT e PLAY Return to previous screen. Time/Date Recorded Play highlighted voice memo. Playing a Voice Memo Press M to open Voice Memos Menu. A Find the Feature M > More > Voice Memos r e z i n a g r O l a n o s r e P Press 1 S 2 PLAY (+) To scroll to the voice memo F play the voice memo When you connect an optional Motorola Original headset or FM Stereo Radio Headset accessory to your T phone, playback is automatically routed to the headset. Tip: You can play a voice note while taking a call. It will not be transmitted to the other party. 124 Playback Screen The playback screen is displayed as the voice memo plays. Indicates %
played. D Voice Memo 3 Press S left to rewind. 100 Voice Memo Number Press S right to fast forward. Return to previous screen. e SAVE DELETE R Press M to open Voice Memos Menu. A Erase voice memo. F T P e r s o n a l O r g a n i z e r 125 Voice Memo Controls Stop playback and go to Voice Memos Menu. D Stop playback and return to voice notes list. Raise or lower playback volume. R If voice memo is unlocked, stop playback and display Delete Voice Memo?
If voice memo is locked, stop playback and unlock voice memo. Press left to rewind three seconds. Press left and hold to rewind to beginning. A Press right to fast forward three seconds. Press right and hold to fast forward to end. r e z i n a g r O l a n o s r e P Press up/down to stop playback and scroll to next voice note. When playback F is complete, Press any press right to number key to restart. alternately stop/
start playback. T 126 Locking and Unlocking a Voice Memo Lock a voice memo to prevent it from being deleted. You must unlock a voice memo to delete it or to send it in a Multimedia Message. Find the Feature M > More > Voice Memos D Press 1 S 2 M 3 S 4 SELECT (+) To scroll to the voice memo open the Voice Memos Menu scroll to Lock or Unlock lock or unlock the voice memo R To lock or unlock a voice memo during playback:
Press 1 M 2 S 3 SELECT (+) A To open the Voice Memos Menu scroll to Lock or Unlock lock or unlock the voice F memo Playback stops when you lock or unlock a voice memo. Press any number key to resume playback. Deleting a Voice Memo Find the Feature T M > More > Voice Memos P e r s o n a l O r g a n i z e r 127 Press 1 S 2 M 3 S 4 SELECT (+) D 5 YES (-) To scroll to the voice memo open the Voice Memos Menu scroll to Delete or Delete All select the highlighted option confirm the deletion or r Notes:
cancel deletion NO (+) R e z i n a g r O l a n o s r e P
You cannot delete a locked voice note.
You cannot recover a deleted voice note. Calculator You can use your phone as a calculator and currency converter. A Calculating Numbers Find the Feature F M > More > Office Tools
> Calculator Press 1 number keys To T enter a number 128 Press 2 S D To highlight a calculator function:
S upadd S downsubtract S leftmultiply S rightdivide
*clear entry
#insert decimal point perform the function R Press M to display the Calculator Menu for access to these options:
A Description Change the entrys sign
(positive/negative) Store the value in memory (overwrites current stored value) Clear the value stored in memory Replace the displayed value with the value stored in memory Divide the displayed value by 100 F T 3 = (+) Function
MS MC MR Percent P e r s o n a l O r g a n i z e r 129 Function Convert Currency Convert Description Enter and convert a currency amount. Enter the desired exchange rate. Currency Set Exchange Rate D R r e z i n a g r A F T O l a n o s r e P 130 Security D Locking and Unlocking Applications You can lock specific phone applications (such as Contacts) so that users must enter the unlock code to use them. Find the Feature M > Settings > Security R
> Lock Application Press 1 keypad keys 2 OK (+) 3 S 4 CHANGE (+) 5 S 6 SELECT (+) To enter your unlock code open the lock application menu A scroll to the application select the application scroll to Locked or Unlocked select Locked or Unlocked F T S e c u r i t y 131 News and Entertainment D Micro-Browser The micro-browser lets you access Web pages and Web-based applications on your phone. Contact your service provider to set up access, if necessary. R Starting a Micro-Browser Session Find the Feature M > Launc Mobile Web Press 1 S 2 SELECT (+) A To scroll to a bookmark, service, or application select the item F Shortcut: If you open a text message with a Web address
(URL) embedded in it, you can press M > Go To to launch the micro-browser and go directly to the URL. T If you are unable to establish a network connection with the micro-browser, contact your service provider. t n e m n i a t r e t n E d n a s w e N 132 Interacting With Web Pages Press S BACK (-) M SELECT (+) N D keypad keys, followed by OK (+) R To scroll through text, or highlight a selectable item select the highlighted item call the highlighted phone number from the micro-browser enter information Tip: Press DELETE (-) to delete one letter at a time if you make a mistake. go back to the previous page open the Browser Menu A Downloading Pictures and Ring Tones You can download a picture, animation, or ring tone from a Web page by selecting its link. A picture or animation is displayed when downloading is complete. A ring tone begins to play when downloading is complete. You can store these object files on your phone, and use them as screen saver images, wallpaper images, and T event alerts. F N e w s a n d E n t e r t a n m e n t i 133 Storing a Picture or Animation File Press 1 STORE (+) 2 S D 3 SELECT (+) To view storage options scroll to Store Only, Set as Screen Saver or Set as Wallpaper store the file and, optionally, set it as your screen saver or wallpaper image R Note: When you set an animation as a wallpaper image, only the first frame of the animation is displayed. For more information about using pictures and animations, see pages 76 and 135. Storing a Ring Tone You can store a ring tone on your phone, and use it as an event alert. A Press 1 STORE (+) 2 S To F view storage options scroll to Store Only or Set As Ring Tone T t n e m n i a t r e t n E d n a s w e N 134 Press 3 SELECT (+) To select the option If you select Store Only, the procedure is complete. If you select Set As Ring Tone, your phone displays Set As Which?, and lists the events for which you can set an alert. scroll to the event store the ring tone and set it as the event alert D 4 S 5 SELECT (+) R For more information about using ring tones, see pages 76 and 88. Viewing Pictures A Your phone contains pictures and animations that you can insert into text messages, and use F as wallpaper and screen saver images. Note: Your phone may include predefined images. These images are identified by a (predefined object) indicator. You cannot rename, delete, or view T details about predefined images. Find the Feature M > Media Center > Pictures N e w s a n d E n t e r t a n m e n t i 135 Press 1 S 2 SELECT (+) 3 S up or down To scroll to the picture view the picture view the previous/next picture or D DETAILS (+) view picture information or M open the Picture Viewer menu to perform other procedures R The Pictures menu can include the following options:
Option Details Set as Wallpaper Set as Screen Saver Rename Delete Send in Message A Description View picture information. Set the picture as your phones wallpaper image. Set the picture as your phones screen saver image. F Rename the picture. Delete the picture. Send the picture in a Multimedia Message. T Note: The picture must be unlocked. Note: When you set an animation as a wallpaper image, only the first frame of the animation is displayed. t n e m n i a t r e t n E d n a s w e N 136 To adjust your phones wallpaper and screen saver images, see page 51 and page 52. Creating Ring Tones You can create and store custom ring tones on your D phone. The ring tones appear in the list of available alerts. Creating a Ring Tone Find the Feature M > Media Center > My Tones A R To scroll to [New Tone]
select [New Tone]
select Notes enter notes (see following section) store the notes select Name F enter a name for the ring tone store the name store the ring tone Press 1 S 2 SELECT (+) 3 CHANGE (+) 4 keypad keys 5 OK (+) 6 CHANGE (+) 7 keypad keys 8 OK (+) 9 DONE (-) N e w s a n d E n t e r t a n m e n t i T Entering Notes To create a new ring tone, use the keypad keys to enter notes. For each note, you must specify the octave
(optional), pitch, length, and a length modifier (optional). Press a key multiple times to cycle through its available 137 options and enter the necessary character as described in the following lists. Octave The default setting for a new tone is octave four. D Display Key 0
Description enter * followed by a number
(0 to 8) to set the octave Notes and Rests R Display Key 0 2 3 4 7
a A b c d e f g r Description sharp flat note A note B note C note D note E note F note G rest T F Lengths and Modifiers Key 0 1 Display 0 1 Description whole note half note t n e m n i a t r e t n E d n a s w e N 138 Key 2 3 4 5 1 Key 8 Display 2 3 4 5
Description quarter note eighth note sixteenth note 1/32 note dotted note double dotted note 2/3 length note D N e w s a n d E n t e r t a n m e n t i Volume Control Characters R Display V, +, and -
Description Set volume level from V1 to V15. Enter V+ or V- to increase or decrease volume one level from current setting. A Note Entry Sequence Action F 1 Set the octave (*0 to *8) before selecting the note. The octave applies to the note and all following notes until you change it again.
(optional) T 2 Enter a sharp or flat (# or &) before selecting the note, if necessary. (optional) 3 Press a keypad key to select the note. (required) 139 Action 4 Set the length (0 to 5) after selecting the note. If you do not specify a length, a quarter note length
(2) is appended to the note. (required) 5 Enter a length modifier (. or : or ;) after you set the D length, if necessary. (optional) t You can perform the following tasks when creating a tone:
Task Insert a rest R Adjust volume A Action Enter one or more rests
(r characters) as needed in the tone sequence. Set the length of the rest (0 to 5) after the rest, just as you would for a note. Enter V+ or V- to increase or decrease volume one level at the current location in the note sequence. Press M to enter the Compose Menu, and select Play All to play the notes F you have entered. T Listen to a new tone as you compose it n e m n i a t r e t n E d n a s w e N 140 Example Press the following keys to create this sequence of notes and rests in octave three: C (quarter note), E flat
(quarter note), half rest, and G (whole note):
Display
*3 c 2
e Press 3 3 1 0 0 3 3 D To set octave three 2 2 2 2 enter note C 3 2 2 2 2 set length to quarter note R 4 0 0 0 0 enter flat symbol enter note E flat 5 3 3 2 7 7 8 1 A 6 2 2 2 2 set length to quarter note r enter rest 1 set length to half rest F g enter note G 0 set length to whole note 9 4 10 0 N e w s a n d E n t e r t a n m e n t i Playing a Tone Find the Feature T M > Media Center > My Tones 141 Press 1 S 2 M 3 S 4 SELECT (+) D 5 PLAY (+) To scroll to the tone open the My Tones Menu scroll to Play select Play play the tone again or return to my tones list CANCEL (-) R Editing a Tone You cannot edit the predefined ring tones included with your phone. To edit a custom ring tone:
Find the Feature M > Media Center > My Tones A Press 1 S 2 EDIT (+) 3 S 4 CHANGE (+) 5 keypad keys 6 OK (+) 7 DONE (-) F To scroll to the tone open the tone details scroll to the item you want to edit (Name or Notes) select the item enter new text or notes store the new text or notes T save your changes t n e m n i a t r e t n E d n a s w e N 142 Deleting a Tone You cannot delete the predefined ring tones included with your phone. To delete a custom ring tone:
Find the Feature M > Media Center > My Tones Press D 1 S 2 M 3 S 4 SELECT (+) 5 YES (-) To scroll to the tone open the My Tones Menu scroll to Delete select Delete R confirm the deletion Downloading a Ring Tone A You can download custom ring tones from the micro-browser application, or from a text message. To download tones from the micro-browser, see page 133. N e w s a n d E n t e r t a n m e n t i Sending Ring Tones F You can send ring tones to other wireless phone users. To insert a ring tone in a text message, see page 66. Radio T You can use your phone to listen to FM radio stations when the optional Motorola Original FM Stereo Radio Headset accessory is plugged into the phones accessory connector port. 143 Turning the Radio On and Off Press Radio (+) To turn the radio on and off D Alternatively, you can use the following procedure:
M > Media Center > Radio Find the Feature Press On (+) or Off (+) To turn the radio on or off R Note: The Radio menu feature and soft key options appear only when the FM Stereo Radio Headset is plugged into the accessory connector port. Tuning a Station A Action Press S to scroll to the next frequency or Press and hold S to scroll to the next available stereo station F Storing a Preset T Action Press and hold a number key (1 to 9) to assign its preset number to the tuned station t n e m n i a t r e t n E d n a s w e N 144 Selecting a Preset Press a number key
(1 to 9) To tune the station stored at the preset location D Sending and Receiving Calls With the Radio On Your phone rings or vibrates as usual to notify you of an incoming call, message, or other event. R Action Press IGNORE (-) to ignore the call Press ANSWER (+), or press the button on the FM Stereo Radio Headset microphone, to answer the call Note: You can use the FM Stereo Radio Headset microphone to converse with the other party during a call A N e w s a n d E n t e r t a n m e n t i To end the call and resume the FM broadcast:
F Action Press O, or press and hold the button on the FM Stereo Radio Headset microphone, to end the call T Turn the radio off before dialing outgoing calls from the phone keypad. You do not have to turn off the radio to dial emergency numbers, or numbers selected from Contacts or your recent call lists. 145 Tip: To dial a recently called number, press N or the button on the FM Stereo Radio Headset microphone to go to the dialed calls list. For information on how to use the dialed calls list, see page 58. D R A F T t n e m n i a t r e t n E d n a s w e N 146 Troubleshooting Check these questions first if you have problems with your phone. If you need additional help, contact the Motorola Customer Call Center at 1-800-331-6456 (USA) or 1-800-461-4575 (Canada). D A R Question Is your phone set up correctly?
Is your battery charged? Do you see [ in the display?
Does the handset have a signal? Do you see 0 in the display?
Is the earpiece volume too low?
Answer Press M #. If you do not see your phone number, contact your service provider. The battery level indicator should have at least one segment showing (\). If it does not, recharge your battery. See page 19. Make sure that your antenna is fully extended. The signal strength indicator should have at least one segment showing (1). If it does F not, move to an area with a stronger signal to use your phone. While on a call, press the upper volume key on the side of your T phone. g n i t o o h s e b u o r T l 146 Question Is the other party unable to hear you?
D Answer Make sure that your antenna is fully extended and that your phone is not muted. Press UNMUTE (+) if necessary to unmute the phone. Also, make sure that your phones microphone is not blocked by its carrying case or a sticker. Dropping your phone, getting it wet, or using a non-Motorola battery or battery charger can damage the phone. The phones limited warranty does not cover liquid damage or damage caused from using non-Motorola accessories. A R Has the phone been damaged, dropped, or gotten wet?
Was a non-Motorola battery or battery charger used?
The following refer to specific problems:
F Problem My phone was stolen. To whom should I report this?
I forgot my password. Solution Report a stolen phone to the police and to your service provider T
(the company that sends you your monthly wireless service bill). See page 48. T r o u b l e s h o o t i n g 147 D Problem I pressed the power key, but nothing happened. Solution Be sure to press and hold P (the power key) until the display appears and you hear an alert. This could take several seconds. If nothing happens, check that a charged battery is installed. See page 18. Enter the factory-preset unlock code (1234), or the last four digits of your phone number. If this fails, call your service provider (the company that sends you your monthly wireless service bill). The application you want is locked. If you do not know the unlock code, see page 48. A R The display says: Enter Unlock Code. How do I unlock my phone?
My phone asks for an unlock code when I try to open a feature. My phone does not ring. If you see Y or Z in the display, then the ringer is turned F off. To change the ring style, see page 49. Also, the ringer may be set to Silent even though your phone is set to T an audible ring style. To set an audible alert, see page 88. g n i t o o h s e b u o r T l 148 Problem I tried to place a call and heard an alternating high/low tone. I cannot send/
receive calls. D R Solution Your call did not reach the wireless system. You may have dialed the number too soon after turning the phone on. Wait until the display says Ready before making a call. Make sure that your antenna is fully extended and that you have a phone signal (the signal strength indicator should have at least one segment showing). Avoid electrical or radio interference, and obstructions such as bridges, parking garages, or tall buildings. A Your phone also may have the Restrict Calls feature turned on. If you know the unlock code, you can change this setting in the security menu (M > Settings
> Security). F Make sure that your antenna is fully extended and is not bent or damaged. T Also, make sure you have a phone signal (the signal strength indicator should have at least one segment showing). Stay clear of any obstructions such as bridges, parking garages, or tall buildings. My phone has poor reception and drops calls. T r o u b l e s h o o t i n g 149 Problem I cannot hear others on my phone. Solution While on a call, press the upper volume key. The display should show the volume increasing. Also, make sure that your phones earpiece is not blocked by its carrying case. Before you can use text messages, you must set up the message inbox. See page 65. To see the most recent calls you dialed or received:
D I cannot open my message inbox. How do I see the calls I sent or received?
R M > More > Recent Calls
> Received Calls or A Dialed Calls F T g n i t o o h s e b u o r T l 150 Problem My phone will not send voicemail commands, passwords, or other codes. D R
> DTMF Solution You must send PIN codes and passwords as DTMF tones while on a call. You can set your phones DTMF tones to be Long, Short, or Off. If you have trouble sending numbers, try changing the DTMF setting. 1 From the idle display, press:
M > Settings > Initial Setup 2 Press S to scroll to Long or Short (some analog networks may not recognize short tones). A 3 Press SELECT (+) to select it. Use the Contrast feature to change the level of contrast in your display. F You can also use the Backlight feature to change the length of time that the display backlight stays on. See page 53. My phones display is too dark. T T r o u b l e s h o o t i n g 151 Solution Your batterys performance is affected by charge time, feature use, temperature changes, backlight use, and other factors. For tips on extending battery life, see page 19. D R Try moving to a quieter location to make your voice recording. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice. Your phone must be set to a TTY mode for the phone to detect your TTY device. See page 99. A Problem My battery didnt last as long as I expected. What can I do to extend battery life I am unable to record a voice note, voice name, or voice shortcut. My TTY device doesnt work with my phone. I plugged the data cable into my phone but my phone did not beep. How do I know if the data cable is ready to go?
The beep indicates that you are set up correctly. If you did not hear a beep, make sure that both ends F of the data cable are connected the smaller end to your phone and the larger end to your computer. Also, your computer may have T deactivated the port to save power. Try opening an application that uses the port, like a fax or dial-up application, to automatically activate the port. g n i t o o h s e b u o r T l 152 Problem My phone beeped when I attached the data cable, but my data and fax applications do not work. D R Solution You must be in an area with digital coverage. Check your phones display for the digital signal indicator (F). Some wireless networks may not support data or fax transmission. If you see the digital indicator, but you are roaming on an unfamiliar network, this may be the case. Also, remember that data and fax transmission usually requires a subscription. Call your service provider for more information. 19200 Kbps is the data transfer rate of the connection between your computer and the phone. The rate of the connection between your phone and the network is displayed on your F phone, and will be either 14400 or 9600 Kbps. A When sending data with the data cable, why does the computer show a connection rate of 19200 Kbps?
I cant end my data call by closing the application on my computer. What can I do?
Try pressing on your phone. Or try T disconnecting the cable or turning off the phone. If possible, always close the connection through your computer, as these alternative methods may disrupt the application on your computer. T r o u b l e s h o o t i n g 153 Problem I launched the micro-browser but the display says: Service Not Available. D Solution You may be in an area without service. If you have wireless service, look in the display for the digital signal indicator (F). If you do not see the indicator, you may be in an area that has only analog service or no service at all. If you see the digital signal indicator, you may be connected to a digital network that does not support Internet access. Try again in a few minutes. The servers may be temporarily busy. R I launched the micro-browser but the display says: Data Server Unavailable. A F T g n i t o o h s e b u o r T l 154 Specific Absorption Rate Data R D The model wireless phone meets the governments requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 1.32 W/kg, and when worn on the body, as A F T 155 D described in this user guide, is 0.36 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:
http://phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site:
http://www.cwta.ca 1. R In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. A 2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. F T 156 Consumer Information on Wireless Phones from the FDA FDA Health and Safety Information D A R The U.S. Food and Drug Administration (FDA) provides consumer information on wireless phones at:
http://www.fda.gov/cellphones/qa.html Following are safety-related questions and answers discussed at this web site. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. What is FDA's role concerning the safety of T wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a F 157 case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:
D Support needed research into possible biological effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best R possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
A
National Institute for Occupational Safety and Health Environmental Protection Agency Federal Communications Commission F
Occupational Safety and Health Administration
National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well. T FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. 158
R D FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document. What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement
(CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. A F T 159 R D What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. T Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by A F 160 R D children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit. Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike hand-free kits, these so-called shields may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. T In February 2002, the Federal Trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. A F 161 Motorola Limited Warranty for the United States and Canada Warranty R D What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, messaging devices, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (Accessories) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (Software) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:
Products and Accessories Products Covered Products and Accessories as defined above, unless otherwise provided for below. A F Length of Coverage One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Limited lifetime warranty for the T lifetime of ownership by the first consumer purchaser of the product. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap covers and cases. 162 Products Covered Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection. Consumer and Professional Two-Way Radio Accessories. D Products and Accessories that are Repaired or Replaced. Length of Coverage Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Ninety (90) days from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. R A Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or
(d) other acts which are not the fault of Motorola, are excluded from T coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. F 163 D Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software Products Covered Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk). R A Length of Coverage Ninety (90) days from the date of purchase. F Exclusions Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Software NOT Embodied in Physical Media. Software that is not T embodied in physical media (e.g. software that is downloaded from the internet), is provided as is and without warranty. Who is Covered?
This warranty extends only to the first consumer purchaser, and is not transferable. 164 What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service. How to Obtain Warranty Service or Other Information USA D R Phones 1-800-331-6456 Pagers 1-800-548-9954 Two-Way Radios and Messaging Devices 1-800-353-2729 All Products 1-800-461-4575 1-888-390-6456 A Canada TTY For Accessories and Software, please call the telephone number designated above for the product with which they are used. F You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name T and location of the installation facility (if applicable) and, most importantly;
(e) your address and telephone number. What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF 165 R D THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola T software or exercise of the exclusive rights reserved for Motorola, is permitted. A F 166 Product Registration D Online Product Registration:
http://www.motorola.com/warranty Product registration is an important step toward enjoying your new Motorola phone. Registering helps us facilitate warranty service, and permits us to contact you should your phone require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status. Thank you for choosing a Motorola product. R A Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. F RF Energy Interference T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 167 Index Numerics 1-dial using 61 1-touch dial D voicemail number 61 3-way call 98 application, locking and unlocking 131 appointments. See datebook auto PIN dial 101 automatic location information A accessories 17, 99, 105, R indicators 32 sending 53 automatic redial 55 108, 124, 143 active line indicator 31, 32 alert creating 137 defined 49 downloading 76, 133 setting 77, 88, 134 turning off 21, 23, 57 ALI indicators 31, 32, 53 analog signal indicator 31 animation downloading 76, 133 managing 135 screen saver 51, 76, 134, 136 wallpaper 50, 76, 134, 136 answering a call 22, 50 168 A B backlight 53 banner graphic 90 battery charging 19 extending battery life 19, F 52, 53 installing 18 level indicator 19, 31, 33 meter 115 block cursor 40 T browser. See micro-browser C calculator 128 calendar. See datebook call 3-way call 98 adding digits after phone calling line identification. See caller ID number 59 camera alert, setting 88 alert, turning off 21, 23, self portrait 25 taking photos 24 57 D R codes car kit 105 character chart 41 clock illustration 30 setting 49 changing 48 default 21, 47, 48 forgetting 48 color, setting 52 computer answer options 50 answering 22 call waiting 63 calling card 82 canceling 56 deleting 58 dialed calls list 58 dialing 21 emergency number 57 ending 22 making 21 muting 63 received calls list 58 receiving 22 recent calls 58 restricting 98 speakerphone 105 storing 58 timing 103 unanswered call 59 Call Failed message 55 call timers 103 call waiting 63 caller ID 25, 56, 59 calling card call 82 A connecting to phone 108 synchronizing data 110, 122 contact voice name, recording 83 Contacts F 1-touch dial 61 attaching 2 numbers 59, 60 creating an entry 80 T deleting an entry 86 dialing a number 84 editing an entry 86 email address, storing 80 entry details 79 long numbers 84 169 number type indicator 79 number, storing 80 picture caller ID 25 ringer ID 81, 88 sorting entries 86 speed dial number 61 synchronizing 110 D cursor 37, 40 customizing the menu 90 activating 102, 151 defined 102 sending 58, 102 E earpiece volume 21 email address, storing in Contacts 80 emergency number 57 end key 22, 34 ending a call 22 Enter Unlock Code message 47, D data call 108 date, setting 49 datebook R 48 event alert 88 external device A connecting to phone 108 synchronizing data 110, 122 reminders 119, 122 synchronizing 110, 122 using 117 deleting a call 58 dialed calls list 58 dialing a number 21 digital signal indicator 31 display backlight 53 banner graphic 90 color 52 description 30 greeting 90 idle display, defined 30 language 92 personalizing 92 drafts folder 73 DTMF tones 170 external display 46 F F fax call 108 flashing cursor 37, 40 flip external display 46 open to answer 22, 50 T screen saver 51 FM Stereo Radio Headset 143 4-way navigation key 34 G greeting 90 H hands-free use 105 headset D accessory, using 105 FM Stereo Radio Headset 143 home keys, personalizing silent ring style 33, 49 soft ring style 33, 49 vibrate and ring style 33, 49 vibrate style 33, 49 voice message waiting 62 iTAP software 41 J joystick 34 K key 92 R I idle display 30 in use indicator 31, 32 Incoming Call message 56 incoming call, canceling 56 indicators active line 31, 32 ALI 31, 32, 53 battery level 19, 31, 33 Contacts number type 79 digital/analog signal 31 in use 31, 32 loud ring style 33, 49 message waiting 28, 31, A end 22, 34 4-way navigation 34 left soft key 31, 34, 92 menu 34, 35 OK key 34 power 21, 63 right soft key 31, 34, 92 F send 22, 58 voice 123 volume control 21 33, 72 missed call 59 ring style 31, 33, 49 roam 31, 32 signal strength 31 keypad answering calls 50 T backlight 53 volume, setting 89 L language, setting 92 171 left soft key functions 31, 34 personalizing 92 location, sending to network 53 lock D application 131 phone 46 Low Battery message 33 animation 76 deleting 73 draft 73 inbox setup 65 locking 73 outbox 72 picture 76 reading 73 receiving 28, 72 reminders 73, 89 ring tone 76 sending 66 status 72 R M making a call 21 master clear 93 master reset 93 Memory is Full! message 73 menu entering text 37 icons, changing in idle A micro-browser animation 133 picture 133 ring tone 133 using 132 display 92 icons, converting to text message waiting indicator 28, 31, 33, 72 90 icons, described 30 language, setting 92 lists 36 navigating 34 personalizing 91 scroll behavior 93 using features 36 view, changing 90 wrap around 93 menu key 34, 35 message 172 F missed call indicator 59 Missed Calls message 59 MMS letter sending 26 MMS, defined 26 MMS. See message T multimedia messaging service. See message muting a call 63 my telephone number 10, 23, 49 my tones 137 N network settings 113 notepad 59 number D storing in Contacts 80 storing your number 49 viewing your number 10, 23 numeric text mode 38 automatic location information 53 clear stored information 93 codes 48 connecting to external device 108 date, setting 49 feature specifications 116 flip 22 keypad, answering calls R 50 A language, setting 92 location 53 locking 46 network settings 113 reset all options 93 security code 48 specifications 116 time, setting 49 turning on/off 21 F unlock code 48 unlocking 21, 46, 47, 48 O OK key functions 34 optional accessory, defined 17 optional feature, defined 17 outbox 72 P passwords. See codes pause character 82 phone active line indicator 32 active line, changing 55 alert, setting 88 alert, turning off 21, 23, 57 answer options 50 phone number active line indicator 32 T active line, changing 55 adding digits after 59 attaching 2 numbers 59, 60 long numbers, storing 84 redialing 55 173 storing in Contacts 80 storing your number 49 viewing your number 10, 23 photo D picture caller ID 25 self portrait 25 sending 24 taking 24 datebook 119, 122 defined 89 text message 73 turning on/off 89 restricting calls 98 right soft key functions 31, 34 personalizing 92 ring alert picture downloading 76, 133 managing 135 screen saver 51, 76, 134, R ring style creating 137 setting 23, 77, 88, 134 turning off 21, 23, 57 136 wallpaper 50, 76, 134, personalizing 88 setting 49 136 ring style indicators 31, 33, picture caller ID, setting 25 PIN code A 49 ring tone dialing automatically 101 storing with Contacts creating 137 downloading 76, 133 setting as event alert 77, F 134 ringer ID listed in Contacts entry 79 setting 81 turning on/off 88 T ringer volume, setting 21, 89 roam indicator 31, 32 entry 81 power key 21, 63 predictive text entry 41 R radio 143 received calls list 58 recent calls 58 redial automatic redial 55 busy number 55 reminders 174 S screen saver 51, 76, 134, 136 scroll behavior, menu 93 security code D changing 48 default 48 forgetting 48 send key 22, 58 short message service. See standby time, increasing 52, 53 storing a call 58 symbol chart 45 symbol text entry 45 synchronizing data 110, 122 T tap method text entry 39 telephone number R message shortcuts 10, 94 signal strength indicator 31 silent ring alert, setting 23, storing in Contacts 80 storing your number 49 viewing your number 10, 49 smart key taking self portrait 25 text A 23 block cursor 40 character chart 41 entry mode, changing 38 flashing cursor 37, 40 iTAP software predictive SMS. See message soft keys functions 31, 34 labels 30 personalizing 92 sound downloading 76, 133 speakerphone activating 105 automatic answer 106 speed dial number, defined 61 sorting Contacts entries 86 using 61 text entry 41 F numeric mode 38 symbol chart 45 symbol mode 45 tap method 39 T text mode, changing 38 time, setting 49 timers 103 travel charger 19 TrueSync 110, 122 TTY device 99 175 voice name dialing 84 recording 83 voice shortcut 94 voicemail 61 using 62 volume D dialing with 1-touch dial R earpiece 21 keypad 89 ringer 21, 89 volume keys 21 U unlock application 131 phone 46 unlock code bypassing 48 changing 48 default 21, 47, 48 entering 21, 47 forgetting 48 V vibrate alert setting 88 turning off 21, 23, 57 vibrate ring alert, setting 49 voice dial A dialing a number 84 recording a voice name W wait character 82 wallpaper 50, 76, 134, 136 warranty 162 Web pages 132 83 voice key dialing a number 84 recording a voice memo F 123 recording a voice name 83 voice memo playing 124 recording 123 voice message waiting indicator 62 176 T art# 020827-O.eps Wireless Phone Safety D Tips Safety is your most important call!
R Your Motorola wireless telephone gives you the powerful ability to communicate by voice almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies the benefits of wireless phones, one that every user A must uphold. When driving a car, driving is your first F responsibility. If you find it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:
1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. T 177 2 When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original hands-
free accessories available today. 3 Position your wireless phone within easy reach. Be D able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4 Let the person you are speaking with know you are R driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 5 If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a to do list or going through your address book takes attention away from your primary responsibilitydriving safely. A 6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before F pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7 Do not engage in stressful or emotional T conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road. 178 8 Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.*
9 Use your wireless phone to help others in D emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.*
10 Call roadside assistance or a special R non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.*
A F T
* Wherever wireless phone service is available. 179 Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. D R A F For more information, please call 1-888-901-SAFE or visit the CTIA Web site at www.wow-com.com 180 T motorola.com 8988485L61-0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-04-20 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear | Class II permissive change or modification of presently authorized equipment |
2 | 2004-02-02 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear | |
3 | 2003-11-04 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2004-04-20
|
||||
1 2 3 |
2004-02-02
|
|||||
1 2 3 |
2003-11-04
|
|||||
1 2 3 | Applicant's complete, legal business name |
Motorola Mobility LLC
|
||||
1 2 3 | FCC Registration Number (FRN) |
0004321311
|
||||
1 2 3 | Physical Address |
Motorola Mobility LLC
|
||||
1 2 3 |
Chicago, Illinois 60654
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
IHD
|
||||
1 2 3 | Equipment Product Code |
T56DH1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J**** N********
|
||||
1 2 3 | Title |
Director Product Compliance
|
||||
1 2 3 | Telephone Number |
847-6********
|
||||
1 2 3 | Fax Number |
847-6********
|
||||
1 2 3 |
n******@motorola.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Yes | |||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Cellular/PCS Transceiver (AMPS/CDMA) | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Class II Permissive Change. Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating configurations is limited to the specific configuration(s) tested in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 Head: 1.48 W/kg; Body-worn: 0.57 W/kg, Part 24 Head: 1.44 W/kg; Body-worn: 1.14 W/kg | ||||
1 2 3 | Class II Permissive Change. Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating configurations is limited to the specific configuration(s) tested in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 Head: 1.48 W/kg; Body-worn: 0.38 W/kg, Part 24 Head: 1.44 W/kg; Body-worn: 0.50 W/kg | |||||
1 2 3 | Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating configurations is limited to the specific configuration(s) tested in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 Head: 1.32 W/kg; Body-worn: 0.36 W/kg, Part 24 Head: 1.21 W/kg; Body-worn: 0.32 W/kg | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Motorola Inc.
|
||||
1 2 3 | Name |
A**** P******
|
||||
1 2 3 | Telephone Number |
847-5********
|
||||
1 2 3 | Fax Number |
847-5********
|
||||
1 2 3 |
a******@motorola.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22 | BC | 824.04 | 848.97 | 0.156 | 2.5 ppm | 40K0F8W | |||||||||||||||||||||||||||||||||
1 | 2 | 22 | BC | 824.04 | 848.97 | 0.156 | 2.5 ppm | 40K0F1D | |||||||||||||||||||||||||||||||||
1 | 3 | 22H | 824.7 | 848.31 | 0.143 | 300 Hz | 1M25F9W | ||||||||||||||||||||||||||||||||||
1 | 4 | 24E | 1851.25 | 1908.75 | 0.388 | 150 Hz | 1M25F9W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22 | BC | 824.04 | 848.97 | 0.156 | 2.5 ppm | 40K0F8W | |||||||||||||||||||||||||||||||||
2 | 2 | 22 | BC | 824.04 | 848.97 | 0.156 | 2.5 ppm | 40K0F1D | |||||||||||||||||||||||||||||||||
2 | 3 | 22H | 824.7 | 848.31 | 0.143 | 300 Hz | 1M25F9W | ||||||||||||||||||||||||||||||||||
2 | 4 | 24E | 1851.25 | 1908.75 | 0.388 | 150 Hz | 1M25F9W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 22 | BC | 824.04 | 848.97 | 0.156 | 2.5 ppm | 40K0F8W | |||||||||||||||||||||||||||||||||
3 | 2 | 22 | BC | 824.04 | 848.97 | 0.156 | 2.5 ppm | 40K0F1D | |||||||||||||||||||||||||||||||||
3 | 3 | 22H | 824.7 | 848.31 | 0.143 | 300 Hz | 1M25F9W | ||||||||||||||||||||||||||||||||||
3 | 4 | 24E | 1851.25 | 1908.75 | 0.388 | 150 Hz | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC