FCC ID: IHDT56CG1 Portable Cellular/PCS Transceiver

 

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56CG1 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows:

EXHIBIT 8 DIGITAL WIRELESS TELEPHONE User's Guide >

Welcome Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola T720 CDMA wireless phone. RY A Menu Key Status Light See incoming call and service status. Left Soft Key Perform functions identied by left display prompt. Headset Jack Insert headset accessory for hands-free use. PRELIMIN Accessory Connector Port Insert charger and phone accessories. Power Key

& End Key Turn phone on and off, end phone calls, exit menu system. Volume Keys Adjust earpiece and ringer volume. 4-Way Navigation Key Scroll through menus and lists, set feature values. Right Soft Key Perform functions identied by right display prompt. Voice Key Record voice notes, phonebook and shortcut names. Send Key Send and answer calls, view recent dialed calls list. Microphone 1 2

(United States)

(Canada) RY A Personal Communications Sector 600 North U.S. Highway 45 Libertyville, Illinois 60048 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States) 1-800-461-4575 (Canada) www.motorola.com www.motorola.ca MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Reg. U.S. Pat. & Tm. Off. TrueSync, Sidekick, Starsh, and the Stylized Starsh Logo are registered trademarks of Starsh Software, Inc., a wholly owned independent subsidiary of Motorola, Inc. All other product or service names are the property of their respective owners. 2002 Motorola, Inc. All rights reserved. Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modied, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Manual number:

Cover number:

PRELIMIN 8988485L49-O Menu Map U Messages Inbox Voicemail Create Message Outbox Quick Notes Drafts Browser Alerts RY A Received Calls Dialed Calls Notepad Call Times z Recent Calls

: Shortcuts

Phonebook Main Menu v Media Center Picture Viewer Radio My Tones Voice Notes w Ring Styles Style Style Detail Z Get It Now a Calculator

/ Settings g Datebook L Web Browser

(see next page) Get It Now Shop Home Go To URL Mark Site Reload About Openwave Advanced PRELIMIN

(go to following menu items)

? More This is the standard phone menu layout. Menu organization and feature names may vary on your phone. Not all features may be available for all users. For example, the Radio option under Media Center is available only when the optional FM Stereo Radio Headset accessory is plugged into your phone. 3 Settings Menu Location Location On 911 Only Network Car Settings Headset RY A Shortcuts Change display zoom:

Press M, then press and hold M Change ringer alert:

Press down volume key to switch to silent alert. Press up volume key to reset to ring alert. Display my phone number:

Press M #

Go to dialed calls list:

Press N Exit menu system:

Press O Personalize Main Menu Home Keys Color Style Greeting Banner Banner Graphic Wallpaper Screen Saver Connection Incoming Call In-Call Setup In-Call Timer Answer Options Phone Status Security Initial Setup My Tel. Numbers Active Line Battery Meter Other Information Phone Lock Lock Keypad Lock Application Restrict Calls New Passwords PRELIMIN Time and Date Auto PIN Dial Auto Redial Backlight Status Light Zoom TTY Setup Scroll Language Contrast DTMF Master Reset Master Clear 4 5 Contents About Your Phone Menu Map About This Guide Safety and General Information Getting Started RY A

. 3

. 10

. 11

. 17 Whats in the Box?. 17 Installing the Battery . 17 Charging the Battery . 18 Changing the Convertible Covers . 19 Turning Your Phone On . 21 Making a Call. 21 Ending a Call. 22 Answering a Call . 22 Seeing Your Phone Number . 22

. 23 Using the Display . 23 Zooming In and Out. 26 Using the Status Light . 26 Adjusting Volume. 27 Using the External Display . 27 Using the 4-Way Navigation Key . 28 Battery Use . 28

. 30 Redialing a Number. 30 Using Automatic Redial . 30 Using Caller ID . 31 Returning an Unanswered Call . 31 Calling an Emergency Number . 32 Turning Off a Call Alert . 32 PRELIMIN Making and Answering Calls Entering Text Using the Menu Using Features While On a Call RY A Canceling an Incoming Call . 32 Calling With Speed Dial . 33 Calling With One-Touch Dial . 33 Calling a Number In a Text Message . 34 Additional Calling Features . 34

. 36 Using Call Waiting. 36 Making a Three-Way Call . 36 Additional On-Call Features . 37

. 38 Navigating to a Feature. 38 Selecting a Feature Option . 40 Entering Feature Information . 41

. 43 Choosing a Text Mode . 43 Using Tap Method . 44 Using Symbol Mode . 46 Using iTAP Software Predictive Text Entry Method . 48

. 52

. 64 Viewing Received Calls or Dialed Calls . 64 Using the Notepad . 66 Viewing and Resetting Call Timers . 66

. 69 Viewing Entry Details . 69 Creating a Phonebook Entry. 70 Storing a PIN Code With a Phone Number. 72 Recording a Voice Name For a Phonebook Entry . 74 Dialing a Phonebook Entry . 75 Storing Longer Numbers. 76 Editing a Phonebook Entry . 77 PRELIMIN Menu Feature Descriptions Recent Calls Phonebook 6 7 Radio Picture Viewer Datebook RY A Deleting a Phonebook Entry . 77 Sorting the Phonebook List. 78 Synchronizing with TrueSync Software . 78

. 79

. 81 Week View. 81 Day View . 82 Event View. 83 Adding a Datebook Event . 84 Changing Event Information . 84 Copying an Event . 85 Deleting an Event . 86 Alarm Clock. 86 Synchronizing with TrueSync Software . 88

. 89 Turning the Radio On and Off . 89 Tuning a Station. 90 Storing a Preset . 90 Selecting a Preset . 90 Sending and Receiving Calls With the Radio On . 90

. 92 Storing Your Voicemail Number . 92 Receiving a Voicemail Message . 93 Listening to a Voicemail Message . 93

. 94 Setting Up the Text Message Inbox. 94 Receiving a Text Message. 95 Reading, Locking, or Deleting a Text Message . 95 Reading Browser Alerts . 97 Sending a Text Message . 98 PRELIMIN MessagesVoicemail MessagesText RY A Sending a Quick Note Text Message . 101 Viewing the Status of Sent Text Messages . 102 Ring Styles . 103 Selecting a Ring Style. 103 Customizing a Ring Style . 103 Creating Alert Tones . 105 Setting Reminders . 110 Shortcuts. 111 Standard Shortcuts . 111 Creating a Shortcut. 111 Using Shortcuts . 113 Voice Notes . 114 Recording a Voice Note . 114 Viewing the Voice Notes List. 115 Playing a Voice Note . 116 Locking and Unlocking a Voice Note. 118 Deleting a Voice Note . 119 Micro-Browser. 120 Starting a Micro-Browser Session . 120 Interacting With Web Pages . 121 Calculator . 122 Calculating Numbers. 122 Converting Currency. 124 Get It Now . 125 Downloading an Application . 125 Launching an Application . 127 Disabling or Removing an Application . 127 Restoring a Disabled Application . 129 Viewing Get It Now Information and History . 130 PRELIMIN 8 RY A Adjusting Your Settings . 131 Setting the Menu View. 131 Reordering Menu Items. 131 Personalizing Soft Keys and Menu Icons . 132 Wallpaper . 132 Screen Saver. 133 Setting Display Color. 134 Hiding or Showing Location Information . 135 TTY Operation. 135 Hands-Free Use . 138 Data and Fax Calls . 141 Making a Cable Connection . 141 Synchronizing Data . 143 Sending a Data or Fax Call . 143 Receiving a Data or Fax Call. 144 Security . 146 Assigning a New Code or Password . 146 If You Forget a Code or Password . 147 Locking and Unlocking Your Phone . 148 Locking and Unlocking Your Keypad . 149 Restricting Calls . 149 Troubleshooting . 151 Programming Instructions . 160 Specific Absorption Rate Data . 162 Additional Health and Safety Information . 164 Warranty . 172 Product Registration . 177 Export Law Assurances . 177 Index. 178 Wireless Phone Safety Tips . 191 PRELIMIN 9 About This Guide This user guide introduces you to the many features in your Motorola wireless phone. Navigating To a Menu Feature Use the menu system to access your phones features. This guide shows you how to select a menu feature as follows:

RY A This example shows that from the idle display, you must press M, scroll to and select More (?) from the main menu, then scroll to and select Phonebook. Optional Features Find the Feature M > More > Phonebook PRELIMIN information. Optional Accessories This label identies an optional network or subscription-dependent feature that may not be offered by all service providers in all geographical areas. Contact your service provider for more This label identies a feature that requires an optional Motorola Original accessory. 10 Safety and General Information RY A IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000. For information regarding radio use in a hazardous atmosphere please refer to the Factory Mutual (FM) Approval Manual Supplement or Instruction Card, which is included with radio models that offer this capability. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Operational Characteristics Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency (RF) energy. The phone operates in the frequency range of 824 MHz to 849 MHz in analog and digital mode and 1851.25 MHz to 1908.75 MHz in digital mode. When you communicate with your phone, the system handling your call controls the power levels at which your phone transmits. The output power level typically may vary over a range from 0.00 watts to 0.50 watts in analog mode and 0.00 watts to 0.32 watts in digital mode. Exposure To Radio Frequency Energy Your Motorola phone is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:

PRELIMIN United States Federal Communications Commission, Code of Regulations; 47 CFR part 2 sub-part J 11 RY A American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition National Council on Radiation Protection and Measurements

(NCRP) of the United States, Report 86, 1986 International Commission on Non-Ionizing Radiation Protection

(ICNIRP) 1998 Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 Australian Communications Authority Radiocommunications

(Electromagnetic Radiation-Human Exposure) Standard 1999 PRELIMIN To assure optimal phone performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:

Portable Phone Operation and EME Exposure Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modications, or attachments could damage the phone and may violate FCC regulations. Do NOT hold the antenna when the phone is in use. Holding the antenna affects call quality and may cause the phone to operate at a higher power level than needed. Phone Operation When placing or receiving a phone call, hold your phone as you would a wireline telephone. Speak directly into the microphone. 12 RY A Body-Worn Operation To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least one inch

(2.5 centimeters) from your body when transmitting. Data Operation When using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least one inch

(2.5 centimeters) from your body. Approved Accessories For a list of approved Motorola accessories, visit our website at www.mot.com. Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise congured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conicts, turn off your phone in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions. PRELIMIN 13 RY A Medical Devices Pacemakers The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, the United States Food and Drug Administration. Persons with pacemakers should:

ALWAYS keep the phone more than six inches (15 centimeters) from your pacemaker when the phone is turned ON. NOT carry the phone in the breast pocket. use the ear opposite the pacemaker to minimize the potential for interference. turn OFF the phone immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. PRELIMIN 14 RY A Safety and General Use While Driving Check the laws and regulations on the use of phones in the area where you drive. Always obey them. When using your phone while driving, please:

give full attention to driving and to the road. use hands-free operation, if available. pull off the road and park before making or answering a call if driving conditions so require. Operational Warnings For Vehicles With an Air Bag Do not place a portable phone in the area over an air bag or in the air bag deployment area. Air bags inate with great force. If a portable phone is placed in the air bag deployment area and the air bag inates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless the phone is a model specically identied as being Intrinsically Safe. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or re resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. PRELIMIN 15 Blasting Caps and Areas To avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. Operational Cautions Antennas Do not use any portable phone that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. RY A PRELIMIN ITC01-101 16 Getting Started Whats in the Box?

Your wireless phone typically comes equipped with a battery and a charger. Other accessory options can customize your phone for maximum performance and portability. To purchase Motorola Original accessories, contact the Motorola Customer Call Center at 1-800-331-6456 in the United States or 1-800-461-4575 in Canada. Installing the Battery You must install and charge the battery to use your phone. RY G A e t t i n g S t a r t e d Your phone is designed to be used only with Motorola Original batteries and accessories. We recommend that you store batteries in their protective cases when not in use. Do This 1 Remove the battery from its protective clear PRELIMIN 2 If necessary, slide down the battery door release latch and lift the door off of the phone. Release latch plastic case. 17 RY A Do This 3 Insert the battery, printed arrow rst, under the tab at the top of the battery compartment and push down. 4 Insert the teeth at the bottom of the battery door into the slot at the base of the phone, then push the door down and snap it into place. PRELIMIN Charging the Battery New batteries are shipped partially charged. Before you can use your phone, you need to install and charge the battery, as indicated by the following instructions. Some d e t r a t S g n i t t e G 18 batteries perform best after several full charge/discharge cycles. Release tab Do This 1 Plug the travel charger into your phone with the release tab facing up. RY G A e t t i n g S t a r t e d 2 Plug the other end of the travel charger into the 3 When your phone indicates that the battery is fully charged (Charge Complete), press the release tab and remove the travel charger. appropriate electrical outlet. PRELIMIN Note: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete. Changing the Convertible Covers You can replace the ip cover and battery cover on your phone to personalize its appearance. Matching front and back cover sets are available in a variety of colors and designs. Your phone is designed to be used only with Motorola Original accessories. See your Motorola retailer for these convertible covers. 19 Remove a Flip Cover Do This Insert your ngertip or ngernail into the slot at the base of the ip cover, then rmly pull up and lift the cover off the phone RY A Do not use tools to remove a ip cover. Using tools to remove a ip cover will damage the cosmetic appearance of the phone. The ip cover is attached tightly to the phone, and considerable force is required to remove it. Notes:

Attach a Flip Cover PRELIMIN Do This Insert the tabs at the bottom of the cover into the slots at the base of the phone, then push the cover down and snap it into place. d e t r a t S g n i t t e G 20 Turning Your Phone On Do This 1 Open your phone 2 Press and hold P for three seconds Power key To expose the keypad turn on your phone RY G A e t t i n g S t a r t e d unlock your phone The unlock code is originally set to 1234. Your service provider may change this number before you receive your phone. 3 If necessary, enter Making a Call your four-digit unlock code and press OK (+) PRELIMIN keypad keys antenna Do This 1 Extend the 2 Press the To optimize signal reception dial the phone number Tip: If you make a mistake, press DELETE (-) to delete the last digit, or press and hold DELETE (-) to clear all digits. 21 Do This 3 Press N To make the call Ending a Call Press O To end the call RY A Answering a Call When you receive a call, your phone rings and/or vibrates and displays an incoming call message. To answer the call Press N or ANSWER (+) PRELIMIN Press M #

Tip: If your phone is locked, you must unlock it to answer the call. Seeing Your Phone Number To see your phone number d e t r a t S g n i t t e G 22 About Your Phone See page 1 for a basic phone diagram. Using the Display The idle display is the standard display that you see when you are not on a call or using the menu. RY A ALI Indicator Active Line Indicator Digital/

In Use Indicator Roam Indicator

5

Shortcuts 10:00am 10/10/02

#8?I M VQ Service Provider L U Analog Signal Indicator Signal Strength Indicator Clock PRELIMIN Z PH.BOOK e Soft Key Labels Web Browser Get It Now Indicator

Menu RECENT Battery Level Indicator Ring Style Indicator

Message Waiting Indicator Messages Use the 4-way navigation key (S) to select one of the four menu feature icons in the display. Labels at the bottom corners of the display show the current soft key functions. A b o u t Y o u r P h o n e 23

A e (menu) indicator at the bottom center of the display indicates that you can press M to enter the main menu. Signal Strength Indicator Vertical bars show the strength of the network connection. You cannot make or receive calls when the j (no signal) indicator is displayed. Digital/Analog Signal Indicator Shows whether you are receiving a digital or analog signal:

RY A

! = analog signal

% = 8K digital call call service 6 = secure CSD 9 = secure packet

# = digital signal

$ = 13K digital

& = packet data PRELIMIN application connection

; = secure data transfer

@ = 3G roam B = 2G roam A = 3G home C = 2G home 7 = unsecure CSD

: = unsecure packet data transfer

< = unsecure application connection Roam Indicator Shows that your phone is seeking or using another network system outside your home network. In Use Indicator Shows that a call is in progress. Other indicators can include:

e n o h P r u o Y t u o b A 24

On text entry screens, shows status information:

D = symbol mode F = caps lock on E = numeric mode G = normal text entry Active Line Indicator Shows the current active phone line:

I = line 1 ALI Indicator Shows the status of the automatic location information feature:

K = line 2 RY A M = ALI off O = iTAP mode On text entry screens, shows status information:

Battery Level Indicator Vertical bars show the battery charge level. Recharge the battery when you see Low Battery and hear the low battery alert. Ring Style Indicator Shows the ring style setting:

N = ALI on P = tap method PRELIMIN V = loud ring Z = vibrate Y = silent R = voicemail message Message Waiting Indicator Appears when you receive a text message. Other indicators can include:

W = soft ring X = vibrate and ring S = voicemail and text message A b o u t Y o u r P h o n e 25

U =limited character count (text entry screen) Menu Indicator Indicates that you can press M to enter the main menu or open a feature sub-menu. Zooming In and Out Press and release M, then press and hold M to zoom in and out on display text. Zoom in to increase text size, zoom out to display more information. You can also zoom in and out from the menu. See RY A page 60. Using the Status Light The status light shows when you have an incoming call or message, or when your phone is roaming (using a non-home system). PRELIMIN Indication alternating red/green ashing green ashing yellow ashing red Status light Status incoming call in service, home system roaming, non-home system no service e n o h P r u o Y t u o b A 26

Volume keys Note: You can turn off the status light to increase your phones standby time, the length of time that your phones battery retains power when the phone is turned on but is not in use. To turn it off, see Initial Setup on page 59. Adjusting Volume Press the up and down volume keys to:

RY A increase and decrease earpiece volume during a call increase and decrease the ringer volume setting when the idle display is visible (ip must be open) Tip: At the lowest volume setting, press the down volume key to switch to silent alert. Press the up volume key to reset ring alert. turn off an incoming call alert PRELIMIN Using the External Display When the ip is closed, the external display shows the time, date, and phone status information. It also displays messages to notify you of incoming calls and other events. A b o u t Y o u r P h o n e 27 RY A Using the 4-Way Navigation Key Use the 4-way navigation key like a joystick to navigate the menu system, change feature settings, and play games. Tip: Down and up are your primary movements within 4-way navigation key menus. Move left and right to change feature settings, navigate the datebook, and edit text. Battery Use Battery performance depends on many factors, including your wireless carriers network conguration; signal strength; the temperature at which you operate your phone; the features and/or settings you select and use;

and your voice, data, and other application usage patterns. Battery Care Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals. To maximize your batterys performance:

PRELIMIN Always use Motorola Original batteries and battery chargers. The phone warranty does not cover damage caused from using non-Motorola batteries and/or battery chargers. New batteries or batteries that have been stored for long periods of time may require a longer charge time. Maintain the battery at or near room temperature when charging. e n o h P r u o Y t u o b A 28 Do not expose batteries to temperatures below

-10C (14F) or above 45C (113F). Always take your phone with you when you leave your vehicle. When you do not intend to use a battery for a while, store it uncharged in a cool, dark, dry place, such as a refrigerator. RY A Over extended periods of time, batteries gradually wear down and require longer charging times. This is normal. If you charge your battery regularly and notice a decrease in talk time or an increase in charging time, then it is probably time to purchase a new battery. The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your batterys label for battery type. Contact your local recycling center for proper disposal methods. Never dispose of batteries in a re because they may explode. Extending Battery Life Turn off the status light The status light uses power. To turn it off, see Initial Setup on page 59. PRELIMIN Using an animated screen saver reduces your phones talk and standby time. See page 133. Activities that require intensive keystroke use (such as playing a game or using messaging) reduce your phones talk and standby time. Minimize keypad-intense functions Turn off the screen saver A b o u t Y o u r P h o n e 29 Making and Answering Calls RY A For basic instructions on how to make a call, end a call, and answer a call, see page 21. Redialing a Number If you hear an ordinary busy signal:

To hang up redial the busy number Press 1 O 2 N Using Automatic Redial PRELIMIN If the network is busy, you hear a fast busy signal, and your phone displays Call Failed. With automatic redial, your phone automatically redials the number for four minutes. When the call goes through, your phone rings or vibrates one time, displays Redial Successful, and then connects the call. You must turn on automatic redial to use the feature. See the Auto Redial option on page 60. s l l a C g n i r e w s n A d n a g n i k a M 30 When automatic redial is turned off, you can manually activate the feature to redial a phone number. When you hear a fast busy signal and see Call Failed:

Press N or RETRY (+) To activate automatic redial RY A Using Caller ID Calling line identication (caller ID) displays the phone number for incoming calls in your phones external and internal displays. The phone displays the callers name when the name is stored in your phonebook, or Incoming Call when caller ID information is not available. Returning an Unanswered Call Your phone keeps a record of your unanswered calls, and displays:

PRELIMIN X Missed Calls Y Unknown, where X is the total number of missed calls and Y is the number of missed calls with no caller ID information To see the received calls list select a call to return make the call Press 1 VIEW (+) 2 S 3 N the T (missed call) indicator M a k i n g a n d A n s w e r i n g C a l l s 31 Calling an Emergency Number Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Note: Emergency numbers vary by country. Your phones preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues. RY A To dial the emergency number call the emergency number Turning Off a Call Alert You can turn off your phones incoming call alert before answering the call. Press 1 keypad keys 2 N PRELIMIN Press either volume key Press O or IGNORE (-) To turn off the alert Canceling an Incoming Call While the phone is ringing or vibrating:

To cancel the incoming call s l l a C g n i r e w s n A d n a g n i k a M 32 Depending on your phone settings and/or service subscription, the call may be forwarded to another number, or the caller may hear a busy signal. RY A Calling With Speed Dial Each entry you store in your phonebook is assigned a unique speed dial number. To speed dial a phonebook entry:

2 #

3 N Press 1 keypad keys To enter the speed dial number for the entry you want to call submit the number Note: Some networks let you skip this step for speed dial numbers 1 through 99. call the entry PRELIMIN Calling With One-Touch Dial To call phonebook entries 1 through 9, just press and hold the one-digit speed dial number for one second. We recommend that you reserve phonebook entry 1

(speed dial number 1) for storing and dialing your voicemail number. In many cases, your service provider has already done this for you. If necessary, see page 70 to store your voicemail number for one-touch dial access. M a k i n g a n d A n s w e r i n g C a l l s 33 Calling a Number In a Text Message To call a phone number embedded in a text message that you receive, highlight or open the message and then:

RY A To open the Text Msg Menu scroll to Call Back call the number Additional Calling Features While dialing (with digits visible in the display), open the Dialing Menu to perform the following tasks:

Press 1 M 2 S 3 SELECT (+) Press M > Attach Number PRELIMIN M > Insert Pause M > Insert Wait To attach a number from the phonebook or recent call lists insert a p (pause) character For more information, see page 72. insert a w (wait) character For more information, see page 72. s l l a C g n i r e w s n A d n a g n i k a M 34 You can also call a number using these features:

Press M > Insert n M > Send Message To insert an n (number) character For more information, see page 72. open a new text message with the number in the To eld RY A To Call a phonebook entry using voice dial To record a voice name, see page 74. a missed call, or a recent received or dialed call Voice key Do This Press and release the voice key, then say a voice name Press M > More

> Recent Calls

> Received Calls or Dialed Calls > entry to call PRELIMIN M a k i n g a n d A n s w e r i n g C a l l s 35 Using Features While On a Call RY A To answer the new call switch back to the rst call Using Call Waiting When you are on a call, an alert tone sounds to indicate that you have received a second call. Making a Three-Way Call During a call, you can call and connect a third party for a three-way call. You cannot do this if you already have a call on hold. Press 1 N 2 N PRELIMIN Press 1 keypad keys 2 N 3 N 4 O To dial the third partys number Note: Some networks may require you to press N rst. call the number connect the two calls end the entire call l l a C a n O e l i h W s e r u t a e F g n i s U 36 Additional On-Call Features RY U A To mute the call Press MUTE (+) (if available) or M > Mute SPEAKER (+) (if available) or M > Spkrphone On M > My Tel. Number M > Send Tones activate an attached speakerphone during an active call see your phone number send a number to the network as DTMF tones, for credit card or password calls To activate DTMF tones, see the DTMF option on page 60. change to TTY mode to use your phone with a TTY device view recent received or dialed call numbers view or send messages view datebook entries view and change the location transmission status of your phone view phone specications PRELIMIN M > Received Calls or Dialed Calls M > Messages M > Datebook M > Location M > Other Information M > TTY Mode s i n g F e a t u r e s W h i l e O n a C a l l 37 Using the Menu Navigating to a Feature Use these keys to move through the menu system:

RY A Menu Key Open a sub-menu when e appears in the bottom center of the display. Right Soft Key Perform the function shown in the lower right corner of the display

(usually SELECT the highlighted menu item). 4-Way Navigation Key Scroll up or down through menus and lists. Scroll left or right to cycle through and set the value of the highlighted menu item. Current selection. EXIT SELECT Media Center Main Menu Left Soft Key Perform the function shown in the lower left corner of the display (usually EXIT or BACK). PRELIMIN End Key Exit the menu system without making changes, return to the idle display. u n e M e h t g n i s U 38 Press S to highlight a menu feature icon in the main menu. Select More (?) to see additional menu features. The following icons represent features that may appear in the main menu, depending on your service provider and service subscription options. Feature RY A Voice Notes Get It Now Settings Web Browser Messages Shortcuts Menu Icon v w a g

z r Feature Menu Icon Z

L U

Media Center Ring Styles Calculator Datebook More Recent Calls Phonebook PRELIMIN Tip: You can set your phone to display the main menu as a text-based list rather than graphic icons. See page 131. U s i n g t h e M e n u 39 Selecting a Feature Option Some features require you to select an item from a list:

Press BACK (-) to go back to the previous screen. 5 V

RY A Dialed Calls 10) John Smith 9) Lisa Owens 8) Adda Thomas 7) Jack Bradsh.. 6) Mary Smith 5) Dave Thomp... BACK e Highlighted item Press M to open the sub-menu. Press VIEW (+) to view details of the highlighted item. VIEW PRELIMIN Press S to scroll up or down to highlight the item you want. In a numbered list, press a number key to highlight the item. In an alphabetized list, press a key multiple times to cycle through the letters on the key and highlight the closest matching list item. u n e M e h t g n i s U 40 Entering Feature Information Some features require you to enter information:

Press S to scroll down to additional items. 5 V Entry Details Name:John Smith No.:2125551212 Type:Work Voice Name:

Speed No.:2 Ringer ID:Contin... Highlighted item

RY A Press CHANGE (+) to edit the information. CANCEL CHANGE Press CANCEL (-) to exit without making changes. DONE (-) appears when you enter or edit information. PRELIMIN Enter numbers or text with the keypad. When an item has a list of possible values, press S to the left or right to scroll through and select a value. When an item has a list of possible numeric values, press a number key to set the value. If you enter or edit information and do not want to save your changes, press O to exit without saving. U s i n g t h e M e n u 41 The message center lets you compose and send text messages. A ashing cursor shows where text will appear:

Press CANCEL (-) to exit without making changes. When you enter text using the standard tap method, the ashing cursor changes to a block cursor, and the soft key functions change:

Press M to open the sub-menu. RY A Press INSERT (+) to insert a quick note, picture, or sound. P V

5 Msg:

Flashing cursor indicates insertion point. INSERT CANCEL e PRELIMIN After two seconds, the block cursor reverts to a ashing cursor and moves to the next position. Block cursor indicates current highlighted character. 5 Msg:

T DELETE e P V OK

Press OK (+) to accept and store the text. Press DELETE (-) to delete the character to the left of the insertion point. u n e M e h t g n i s U 42 Entering Text RY E A n t e r i n g T e x t Multiple text entry methods make it easy for you to enter names, numbers, and messages on your phone. Choosing a Text Mode Press M > Entry Method from any text entry screen to select a text mode:

iTAP Let the phone predict each word as you enter it. See page 48. Numeric Symbol Browse Tap Method Enter letters, numbers, and symbols by pressing a key one or more times. See page 44. Enter numbers only. Enter symbols only. See page 46. Browse your phonebook or recent call lists to select a name or number. PRELIMIN Note: The text mode you select remains active until you change it by selecting another mode. 43 Using Tap Method This is the standard mode for entering text on your phone. Press M > Entry Method from any text entry screen and select the Tap Method menu option. RY A To select a letter, number, or symbol shown in the Character Chart on page 46 enter the remaining characters store the text when you are nished Do This 1 Press a number key one or more times 2 Continue 3 Press OK (+) pressing number keys PRELIMIN t x e T g n i r e t n E 44 General Text Entry Rules Press a number key repeatedly to cycle through its characters. See Character Chart on page 46. RY E A Press up or down to change letter in block cursor to uppercase or lowercase. n t e r i n g T e x t MSG:

Press a number key as many times as necessary to enter the desired character at ashing cursor location. Press left or right to move ashing cursor to the left or right in text message. CANCEL INSERT Press and hold a number key to cycle between text and numeric entry modes. PRELIMIN If you do not press a key for two seconds, the character in the block cursor is accepted, and the cursor moves to the next position. The rst character of every sentence is capitalized.

(Press S down to force the character to lowercase while it is highlighted by the block cursor). 45 Character Chart Use this chart as a guide for entering spaces, letters, numbers, and symbols with the tap method. w u l i b s 1 space . 1 ? ! , @ _ & ~ : ; " -

RY A t p q r s 7 p t u v 8 q

a b c 2 a d e f 3 d e f g h i 4 g h j k l 5 k 2 3 4 5 6 m n o 6 m 7 8 9 w x y z 9 x 0 PRELIMIN Note: This chart may not reect the exact character set available on your phone. Using Symbol Mode Your phone provides an alternate way to enter symbol characters in a message. Press M > Entry Methodfrom

+ - 0 x * / \ [ ] = > < #

t x e T g n i r e t n E 46 y any text entry screen and select the Symbol menu option. Do This 1 Press a number key one time 2 Press S or Press the number key multiple times To display its symbol options at the bottom of the display See Symbol Chart on page 47. highlight the symbol you want RY E A n t e r i n g T e x t Symbol Chart Use this chart as a guide for entering characters in symbol mode. 3 Press SELECT (+) enter the symbol at the ashing cursor location PRELIMIN 1 space . ? ! , @ _ &

2 @ _ \

3 4 5 6 7

47 8 9 0

+ - x * / = > < #

Using iTAP Software RY A Predictive Text Entry Method iTAP software provides a predictive text entry method that lets you enter a word using one keypress per letter. Press M > Entry Method from any text entry screen and select the iTAP menu option. Note: You can switch languages within a message in iTAP text mode. Press M > Entry Method to select the language you want to use. Enter Words Do This 1 Press a number PRELIMIN 2 Press number keys (one per letter) key one time To enter the rst letter of the word The letters associated with the key are shown at the bottom of the display. enter the rest of the word Alternative words and letter combinations are shown at the bottom of the display. The word choices are updated with each keypress. t x e T g n i r e t n E 48 Do This 3 Press S 4 Press SELECT (+) enter the word at the ashing To highlight the word you want For example, to spell the word act, press 2 2 8. The display shows:

cursor location A space is automatically inserted after the word. RY E A Press S to scroll and see additional word choices. n t e r i n g T e x t

Press SELECT (+) to insert the highlighted word. O V 5 Msg:

Flashing cursor indicates insertion point. Press DELETE (-) to clear the last letter. Act Cat Bat Abu }

DELETE SELECT PRELIMIN Do This 1 Press DELETE (-) one or more times Enter Novel Words You may enter a word that the iTAP software does not recognize. If the word you want is not displayed:

To delete letters until you see a letter combination that matches the start of the word 49 Do This 2 Press S 3 Press SELECT (+), then press S to the left 4 Continue to enter letters and highlight letter combinations To highlight the letter or letter combination shift the text entry cursor to the left and lock the selected word portion spell the word RY A To enter punctuation or other characters as shown in the Character Chart on page 46 Punctuation Press 0 or 1 PRELIMIN Press S up or down Capitalization The rst word of a sentence is automatically capitalized, with following words in lowercase. To change the words to initial character capitalized, all uppercase characters, or all lowercase characters t x e T g n i r e t n E 50 Enter Numbers Do This 1 Enter the rst digit and then highlight it 2 Press number keys To put the iTAP software in number entry mode add digits to the number RY E A n t e r i n g T e x t 3 Press SELECT (+) enter the number at the ashing cursor location Delete Letters and Words Place the cursor to the right of the text you want to delete, and then do the following:

To delete one letter at a time delete the entire message Do This Press DELETE (-) Hold DELETE (-) PRELIMIN 51 Menu Feature Descriptions This chapter describes all of your phones features in order of the menu map shown on pages 34. RY A M > Media Center

> Picture Viewer Main Menu MEDIA CENTER M > Media Center View and manage the pictures and animations stored on your phone. See page 79.

> Radio Radio Picture Viewer PRELIMIN My Tones Listen to FM radio stations with the optional Motorola Original FM Stereo Radio Headset accessory. This menu feature is displayed only when the FM Stereo Radio Headset is plugged into the accessory connector port on your phone. See page 89. M > Ring Styles > My Tones Create custom alert tones for your phone. See page 105. Use the voice key to record messages and phone calls. See page 114. VOICE NOTES M > Voice Notes s n o i t p i r c s e D e r u t a e F u n e M 52 Note: Recording phone calls is subject to varying state and federal laws regarding privacy and recording of conversations. RING STYLES Style M > Ring Styles > Style Select the ring style your phone uses to notify you of incoming calls, messages, or other events. See page 103. Style Detail M > Ring Styles

> Style Detail Change details about the current ring style. Style represents the name of the ring style. See page 103. RY A M > Get It Now GET IT NOW CALCULATOR Download and run games and applications on your phone. See page 125. PRELIMIN SETTINGS See page 56. DATEBOOK WEB BROWSER M > Datebook M > Calculator The micro-browser delivers WAP

(Wireless Application Protocol) pages M > Web Browser Use your phone as a calculator or currency converter. See page 122. Use the datebook calendar to schedule and review your appointments. See page 81. M e n u F e a t u r e D e s c r i p t i o n s 53 from your service provider directly to your phone. See page 120. MESSAGES Adjust message settings, view and manage the various types of messages your phone can receive and/or send:

Voicemail M > More > Messages Listen to your recorded voice messages. See page 92. RY A Inbox Outbox Quick Notes Create Message Create new text messages. See page 98. Read and manage text messages. See page 94. View all outgoing text messages, delivered and undelivered. Select and send pre-written messages from the quick notes list. See page 101. Store and edit text messages that you have written but not sent. PRELIMIN received by your micro-browser. See page 97. Browser Alerts Read alert messages Drafts s n o i t p i r c s e D e r u t a e F u n e M 54 RY A RECENT CALLS Received Calls M > More > Recent Calls

> Received Calls View a list of recently received calls. See page 64. Dialed Calls M > More > Recent Calls

> Dialed Calls View a list of recently dialed calls. See page 64.

> Recent Calls

> Call Times Notepad M > More > Recent Calls

> Notepad Call or store the last number entered on the keypad. See page 66. View call timers that track time spent on your last call, dialed calls, received calls, all calls since reset, and all calls total. See page 66. Call Times M > More PRELIMIN SHORTCUTS M > More > Shortcuts Create keypad or voice shortcuts to menu features. See page 111. PHONEBOOK M > More > Phonebook Store names and numbers as entries in your phonebook, then call numbers by selecting them from the phonebook list. See page 69. M e n u F e a t u r e D e s c r i p t i o n s 55 Settings Menu PERSONALIZE M > Settings > Personalize Color Style Set several personal phone options:

Main Menu Home Keys RY A Change the order of the main menu. See page 131. Change the functions of the soft keys in the idle display. See page 132. Select the color palette that your phone uses for the display. See page 134. Change the text displayed when you turn on your phone. Change the text that appears in the idle display. Note: Banner text does not appear in your phones external display. Set the banner graphic in the idle display to an analog clock or a status icon. Change the background image used in the idle display. See page 132. Banner Greeting PRELIMIN Banner Graphic Wallpaper s n o i t p i r c s e D e r u t a e F u n e M 56 Screen Saver Change your phones screen saver image. See page 133. CONNECTION Connect your phone to a computer or hand-held device to send and receive data and fax calls on the connected device. See page 141. RY A Incoming Call M > Settings

> Connection

> Incoming Call Set the features that are active during a call, such as the in-call timer and call answering options. Specify the format for the next incoming call. You can select Fax In Only, Data In Only, or Normal. See page 144. IN-CALL SETUP In-Call Timer PRELIMIN Off Adjust call timer Display and Beep settings. You can set your timer to beep at a selected interval during your calls. (60 seconds is the default.) You can also turn on or off a display timer during calls as follows:

Time Display the elapsed time for the current call. No in-call timer display. M > Settings > In-Call Setup

> In-Call Timer M e n u F e a t u r e D e s c r i p t i o n s 57 Answer Options M > Settings > In-Call Setup

> Answer Options Turn call answering options on or off:

Multi-Key Answer by pressing any key. Open to Answer Answer by opening the ip. PHONE STATUS My Tel. Number M > Settings RY A

> Phone Status

> My Tel. Number M > Settings > Phone Status

> Battery Meter Change the active phone line to send and receive calls from either of the available numbers. View, enter, and edit information about your name and phone number. M > Settings

> Phone Status

> Active Line Active Line Battery Meter PRELIMIN Phone Lock Other Information M > Settings View a detailed battery charge meter. View your phones feature specications

(if available from the service provider).

> Phone Status

> Other Information M > Settings > Security

> Phone Lock Lock and unlock your phone. See page 148. SECURITY s n o i t p i r c s e D e r u t a e F u n e M 58 Lock Keypad M > Settings > Security

> Lock Keypad View instructions on how to lock and unlock your keypad. See page 149. Lock Application M > Settings > Security

> Lock Application Lock and unlock specic phone applications (such as phonebook or datebook). When an application is locked, users must enter the unlock code to use the application. RY A M > Settings > Security

> Restrict Calls Restrict incoming and outgoing calls. See page 149. M > Settings > Security

> New Passwords Change your unlock code (originally set to 1234) or your security code (originally set to 000000). See page 146. INITIAL SETUP M > Settings > Initial Setup Restrict Calls New Passwords PRELIMIN Set many basic phone options:

Time and Date Set the phones time and date. M e n u F e a t u r e D e s c r i p t i o n s 59 Auto PIN Dial Auto Redial RY A Some networks require an authenticating PIN code to allow outgoing calls. Use this feature to automatically dial your PIN. Use this option to turn on or turn off the automatic redial feature. When you turn on automatic redial, your phone automatically redials calls that fail due to busy network conditions. See page 30. Set the amount of time that the display backlight remains on, or turn off the backlight to conserve battery power. Turn the status light off (to conserve battery power) and on. Switch between six lines

(Zoom Out) and four lines

(Zoom In) of display text. Set your phone to operate in one of three TTY modes, or return to normal Voice mode. See page 135. Backlight PRELIMIN Status Light TTY Setup Zoom s n o i t p i r c s e D e r u t a e F u n e M 60 Scroll Language Contrast DTMF RY A Force the cursor to stop or wrap around when it reaches the top or bottom of a list in the display. Set the language for phone menus. Adjust the contrast setting for your display. Your phone can send a number to the network as dual tone multi-frequency

(DTMF) tones. DTMF tones are used to communicate with automated systems that require you to enter a number such as a code, password, or credit card number. Use this option to set DTMF tones to be long, short, or off. Reset all options back to their original factory settings except for the unlock code, security code, and lifetime timer. PRELIMIN Master Reset M e n u F e a t u r e D e s c r i p t i o n s 61 Master Clear Reset all options back to their original factory settings except for the unlock code, security code, and lifetime timer, and clear all user settings and entries. Note: This option erases all user-entered information stored in your phones memory, including phonebook and datebook entries. Once you erase the information, it cannot be recovered. RY A LOCATION If your phone has the automatic location information (ALI) feature, it can tell the phone network where you are physically located. See page 135. M > Settings

> Location PRELIMIN M > Settings

> Network View and adjust your phones network settings. Your service provider registers your phone to a network. You can view information about the current network, change how your phone searches for a network, and activate alerts that indicate when a call is dropped or network registration changes. NETWORK s n o i t p i r c s e D e r u t a e F u n e M 62 CAR SETTINGS M > Settings

> Car Settings Adjust hands-free car kit settings. You can set your phone to route calls directly to the car kit when it detects a connection, and automatically answer calls after two rings. See page 138. Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. RY A HEADSET Set your phone to automatically answer calls after two rings when connected to a headset. See page 138. M > Settings

> Headset PRELIMIN M e n u F e a t u r e D e s c r i p t i o n s 63 Recent Calls Viewing Received Calls or Dialed Calls Your phone keeps a list of the calls you recently received and dialed, even if the calls did not connect. The lists are sorted from newest to oldest entries. The oldest entries are deleted as new ones are added. Shortcut: Press N to go directly to the dialed calls list from the idle display. RY A M > More > Recent Calls To scroll to Received Calls or Dialed Calls select the list scroll to an entry Note: < means the call connected. Press 1 S Find the Feature 2 SELECT (+) 3 S PRELIMIN s l l a C t n e c e R 64 Press 4 N or VIEW (+) or M To call the entrys number view entry details open the Last Calls Menu to perform other procedures as described in the following list RY A The Last Calls Menu can include the following options:

Option Store Delete Delete All Send Message Description Create a phonebook entry with the number in the No. eld. Delete the entry. Delete all entries in the list. Open a new text message with the number in the To eld. Add digits after the number. PRELIMIN phonebook or recent call lists, after the highlighted number. Send the number to the network as DTMF tones, for credit card or password calls. Add Digits Attach Number Attach a number from the Send Tones R e c e n t C a l l s 65 Using the Notepad Your phone stores the most recent string of digits entered on the keypad in a temporary memory location called the notepad. This can be a phone number that you called, or a number that you entered but did not call. To retrieve the number stored in the notepad:

Find the Feature M > More > Recent Calls RY A

> Notepad To call the number open the Dialing Menu to attach a number or insert a special character create a phonebook entry with the number in the No. eld Press N or or M STORE (+) PRELIMIN Viewing and Resetting Call Timers Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing O. This time includes busy signals and ringing. s l l a C t n e c e R 66 The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider. For billing information, please contact your service provider directly. You can view the following network connection times:

RY A Received Calls Approximate time spent on Timer Last Call Dialed Calls Description Approximate time spent on last dialed or received call. You cannot reset this timer. Approximate time spent on dialed calls since the last time you reset this timer. PRELIMIN received calls since the last time you reset this timer. Approximate time spent on dialed and received calls since the last time you reset this timer. Approximate time spent on all calls on this phone. You cannot reset this timer. All Calls Lifetime R e c e n t C a l l s 67 To view a call timer:

Find the Feature Press 1 S 2 SELECT (+) To reset the call timer:

M > More > Recent Calls

> Call Times To scroll to the timer you want view the recorded time RY A To reset the time (if available) conrm the reset Press 1 RESET (+) 2 YES (-) PRELIMIN s l l a C t n e c e R 68 Phonebook You can store a list of names and phone numbers or email addresses in your phones electronic phonebook. To see the names in your phonebook, press M > More

> Phonebook from the idle display. Scroll to a name and press VIEW (+) to view details of the phonebook entry as shown below. Viewing Entry Details RY A Entrys phone number or email address

5

Entrys Name Voice Name indicator indicates a recorded voice name V

*Carlo Emrys 01543372151410 Speed No. 15 Ringer ID:Contin... PRELIMIN Type indicator identies number type:

$ Work U Home S Main h Mobile Z Fax p Pager

[ Email Return to list BACK e EDIT Press M to open the Phonebook Menu Entrys speed dial number Entrys ringer ID setting Edit entry Note: When you set a distinctive ringer alert for an entry, the Ringer ID setting appears below the speed dial number. P h o n e b o o k 69 M > More > Phonebook M > New Creating a Phonebook Entry A phone number or email address is required for a phonebook entry. All other information is optional. Shortcut: Enter a phone number in the idle display, then press STORE (+) to create a phonebook entry with the number in the No. eld. Go directly to step 3 to continue. Enter Information Find the Feature RY A Press 1 S 2 SELECT (+) 3 CHANGE (+) 4 keypad keys 5 OK (+) 6 CHANGE (+) 7 keypad keys PRELIMIN To scroll to Phone Number or Email Address select the entry type select Name enter a name for the entry store the name select No. or Email enter the phone number or email address (to a maximum of 32 characters) Tip: You can store a PIN code with the phone number. See page 72. store the phone number or email address 8 OK (+) k o o b e n o h P 70 Press 9 CHANGE (+) 10 S 11 SELECT (+) 12 RECORD (+) or To select Type Note: This option is not available for email entries. scroll to the number type select the number type record a voice name for the entry, if desired RY A 13 S Go to step 13 if you do not want a voice name PRELIMIN scroll to Speed No. The next available speed dial number is assigned to a new phonebook entry. select Speed No. if you want to change it enter a different speed dial number, if desired store the speed dial number select Ringer ID if you want to assign a distinctive ringer alert for the phone number Your phone uses the alert to notify you when you receive a call from this phone number. See page 104. 14 CHANGE (+) 15 keypad keys 16 OK (+) 17 CHANGE (+) P h o n e b o o k 71 Press 18 S 19 SELECT (+) 20 SELECT (+) To scroll to the alert you want store the ringer ID alert select MORE if you want to create another entry under the same Name You must use a different Type identier for each number. RY A To store the entry Complete Phonebook Entry When you are nished entering information for a phonebook entry:

Press DONE (-) PRELIMIN Storing a PIN Code With a Phone Number You can store a PIN code with the phone number for calls that require additional digits (for example, to make a calling card call, or to retrieve voicemail or answering machine messages). Insert one or more of the following k o o b e n o h P 72 characters in the dialing sequence to ensure that the number dials and connects properly:

M > Insert n Press M > Insert Pause M > Insert Wait RY A To insert a p (pause) character Your phone dials the preceding digits, waits for the call to connect, then sends the remaining digit(s). insert a w (wait) character Your phone dials the preceding digits, waits for the call to connect, then prompts you for conrmation before it sends the remaining digit(s). insert an n (number) character Your phone prompts you for a number before dialing the call. The number you enter is inserted into the dialing sequence in place of the n character PRELIMIN Note: You can store a maximum of 32 digits per number. Each character counts as one digit. P h o n e b o o k 73 Recording a Voice Name For a Phonebook Entry You can record a voice name for a new or existing phonebook entry. A voice name lets you call the phonebook entry using voice dial (see page 75). Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice. M > More > Phonebook RY A To scroll to the entry view entry details edit the entry scroll to Voice Name begin recording record the voice name conrm the voice name store the voice name Find the Feature Do This 1 Press S 2 Press VIEW (+) 3 Press EDIT (+) 4 Press S 5 Press RECORD (+) 6 Press and release PRELIMIN 7 Press and release the voice key and repeat the name 8 Press DONE (-) the voice key and say the entrys name (in two seconds) k o o b e n o h P 74 Dialing a Phonebook Entry Use one of the following procedures to call a number (or send a text message to an email address) stored in your phonebook. Phonebook List Find the Feature M > More > Phonebook RY A To jump to entries that begin with that letter (optional) scroll to the entry make the call Press 1 keypad key letter Voice Dial 2 S 3 N Do This Press and release the voice key and say the entrys name

(in two seconds). To make the call PRELIMIN To speed dial a phonebook entry, see page 33. To call an entry with one-touch dial, see page 33. P h o n e b o o k 75 Storing Longer Numbers A phonebook number can contain a maximum of 32 digits and characters. You can create multiple phonebook entries to store a dialing sequence that exceeds the 32-character limit. Then you can send the entries in sequence to dial the number. To store a dialing sequence longer than 32 characters:

RY A Do This 1 Create a phonebook entry to store the rst part of the dialing sequence (for example, the number for your long-distance service provider). 2 Create a second phonebook entry to store the next part of the dialing sequence (for example, the country code and phone number for an international call). 3 Repeat step 2 as necessary to store the entire dialing sequence. (For example, create a third phonebook entry to store your calling card number and PIN number.) PRELIMIN pause or wait tasks, if necessary, to complete the dialing sequence. Your phone returns to the idle display. Do This 1 Dial the rst phonebook entry. Perform any To dial a dialing sequence stored as multiple phonebook entries:

k o o b e n o h P 76 Do This 2 Press M > More > Phonebook to re-open the phonebook. 3 Highlight the second phonebook entry, then press M > Send Tones to send the next portion of the dialing sequence. 4 Repeat steps 2 and 3 as necessary to send the entire dialing sequence. RY A Editing a Phonebook Entry Find the Feature M > More > Phonebook Press 1 S 2 VIEW (+) 3 EDIT (+) To scroll to the entry view entry details edit the entry PRELIMIN Press 1 S 2 M 3 S 4 SELECT (+) 5 YES (-) To scroll to the entry open the Phonebook Menu scroll to Delete select Delete conrm the deletion Edit the entry as described on pages 70-72. Deleting a Phonebook Entry Find the Feature M > More > Phonebook P h o n e b o o k 77 Sorting the Phonebook List You can sort your phonebook list by speed dial number

(the standard), name, email address, or voice name. Note: The voice name sort is identical to the name sort, except that entries with voice name tags appear rst. M > More > Phonebook RY A To open the Phonebook Menu scroll to Setup select Setup scroll to Sort by select Sort by scroll to Name, Speed No., Voice Name, or Email select the sort order Find the Feature 7 SELECT (+) Press 1 M 2 S 3 SELECT (+) 4 S 5 CHANGE (+) 6 S PRELIMIN Synchronizing with TrueSync Software You can synchronize phonebook entries between your phone and computer or hand-held device with Starsh TrueSync software, a Motorola accessory product. See the TrueSync user guide for more information. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. k o o b e n o h P 78 Picture Viewer Your phone contains pictures and animations that you can use as wallpaper and screen saver images. Note: Your phone may include predened RY A images. These images are identied by a

(predened object) indicator. You cannot rename, delete, or view details about predened images. Find the Feature M > Media Center

> Picture Viewer To scroll to the picture view the picture view the previous/next picture or Press 1 S 2 SELECT (+) 3 S up or down PRELIMIN DETAILS (+) M or view picture information open the Picture Viewer menu to perform other procedures as described in the following list P i c t u r e V i e w e r 79 The Picture Viewer menu can include the following options:

Option Details Set as Wallpaper Set as Screen Saver Description View picture information. Set the picture as your phones wallpaper image. Set the picture as your phones screen saver image. Rename the picture. Delete the picture. RY A To adjust your phones wallpaper and screen saver images, see page 132 and page 133. Rename Delete PRELIMIN r e w e i V e r u t c i P 80 Datebook RY A The datebook is a calendar that lets you schedule and organize events such as appointments and meetings. You can set the datebook to send a reminder alarm for specic events. Note: You must set the correct time and date on your phone to use the datebook. To schedule or review datebook events:

Find the Feature Week View The datebook initially displays a calendar for the week. Lines or lled boxes indicate scheduled events. M > Datebook PRELIMIN Full day (12-hour) event scheduled Untimed event 12 hour window Exit the datebook Days of week

(press S left or right to select) One-hour event Go to selected day Press M to open the Datebook Menu D a t e b o o k 81 Day View Select a day and press VIEW (+) to see the days events. 5 V

Day of week RY A Show event details Events

{ THU 19-NOV }

Joes Birthday 8:00A Marie,.. 9:00A conf c.. 9:30A status 1:00A presen.. 3:00A weekly.. BACK e Press M to open the Datebook Menu Untimed event Reminder alarm Down scroll arrow Return to previous screen VIEW PRELIMIN k o o b e t a D 82 Event View Select an event and press VIEW (+) to see event details. Reminder alarm Duration Alarm time 5 V ATHU 8:00am Marie, mtg for status

(1 hrs) A10 min before None

Day and time RY A Event details Edit event Press M to open the Datebook Menu Repeat Return to previous screen EDIT BACK e PRELIMIN D a t e b o o k 83 Adding a Datebook Event A title is required for a datebook event. All other information is optional. Note: You must create an event to use the reminder alarm. Find the Feature M > Datebook > day M > New RY A To select Title enter a title for the event store the event title scroll to other elds and enter information as necessary You can set start time, duration, date, repeat interval, and reminder alarm. store the event 5 DONE (-) Press 1 CHANGE (+) 2 keypad keys 3 OK (+) 4 S PRELIMIN Press 1 S left or right 2 VIEW (+) 3 S 4 VIEW (+) 5 EDIT (+) Find the Feature M > Datebook To scroll to the day display the day view scroll to the event display the event view edit the event Changing Event Information k o o b e t a D 84 Press 6 S 7 CHANGE (+) 8 keypad keys 9 DONE (-) To scroll to the information you want to change edit the information enter new information store the information RY A Copying an Event Find the Feature M > Datebook Press 1 S left or right 2 VIEW (+) 3 S 4 M 5 S 6 SELECT (+) 7 YES (-) To scroll to the day display the day view scroll to the event open the Datebook Menu scroll to Copy copy the event conrm the copy Your phone assumes you want to change the date, and displays the Date eld. enter date information move to month, day, and year PRELIMIN 8 keypad keys 9 } (+) or S to the right 10 DONE (-) save the copy of the event D a t e b o o k 85 Press 11 S 12 DONE (-) Deleting an Event Find the Feature M > Datebook To scroll to and edit event information, if necessary store the information RY A To scroll to the day display the day view scroll to the event open the Datebook Menu scroll to Delete select Delete conrm the deletion Press 1 S left or right 2 VIEW (+) 3 S 4 M 5 S 6 SELECT (+) 7 YES (-) PRELIMIN Alarm Clock Your phone includes an alarm clock that you set and activate from the datebook week view or day view. Notes:

The alarm clock setting does not appear in the datebook day view, and is not synchronized with datebook settings Your phone must be turned on to use the alarm k o o b e t a D 86 Set the Alarm Find the Feature Press 1 CHANGE (+) 2 S or keypad keys 3 DONE (-) 4 S M > Datebook M > Alarm Clock RY A To select Start enter the alarm activation time store the time scroll to other elds and enter information as necessary You can set date, title, and repeat interval. scroll to the (alarm) indicator select scroll to On to activate the alarm or Off to turn off the alarm select the alarm on/off setting store the alarm setting 5 S 6 CHANGE (+) 7 S PRELIMIN 8 SELECT (+) 9 DONE (-) Turn Off the Alarm When the alarm is activated, your phone rings or vibrates (depending on the alarm setting for the current ring style), and displays the time and alarm title. D a t e b o o k 87 The alarm is programmed to ring for 30 minutes, or until you perform one of the following operations. Press EXIT (-) or O DELAY (+) To turn off the alarm turn off the alarm for 8 minutes The alarm is reactivated at the end of 8 minutes. RY A Synchronizing with TrueSync Software You can synchronize datebook entries between your phone and computer or hand-held device with Starsh TrueSync software, a Motorola accessory product. See the TrueSync user guide for more information. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. PRELIMIN k o o b e t a D 88 Radio You can use your phone to listen to FM radio stations when the optional Motorola Original FM Stereo Radio Headset accessory is plugged into the phones accessory connector port. RY R A a d i o To turn the radio on and off Turning the Radio On and Off Alternatively, you can use the following procedure:

Find the Feature M > Media Center > Radio To turn the radio on or off Press Radio (+) Press On (+) or Off (+) PRELIMIN Note: The Radio menu feature and soft key options appear only when the FM Stereo Radio Headset is plugged into the accessory connector port. 89 Tuning a Station Do This Press S left or right or Press and hold S left or right To scroll to the next frequency scroll to the next available stereo station RY A To assign its preset number to the tuned station Storing a Preset Selecting a Preset Do This Press and hold a number key

(1 to 9) PRELIMIN Press a number key

(1 to 9) Sending and Receiving Calls With the Radio On Your phone rings or vibrates as usual to notify you of an incoming call, message, or other event. To tune the station stored at the preset location o i d a R 90 Do This Press IGNORE (-) Press ANSWER (+) or Press the button on the FM Stereo Radio Headset microphone To ignore the call answer the call Note: You can use the FM Stereo Radio Headset microphone to converse with the other party during a call RY R A To end the call a d i o To end the call and resume the FM broadcast:

or Do This Press O Press and hold the button on the FM Stereo Radio Headset microphone PRELIMIN Turn the radio off before dialing outgoing calls from the phone keypad. You do not have to turn off the radio to dial emergency numbers, or numbers selected from your phonebook or recent call lists. Tip: To dial a recently called number, press N or the button on the FM Stereo Radio Headset microphone to go to the dialed calls list. For more information, see page 64. 91 MessagesVoicemail RY A You can listen to your voicemail messages by calling your network voicemail phone number. Voicemail messages are stored on the networknot on your phone. Storing Your Voicemail Number Storing your voicemail number on your phone makes it easy for you to listen to new voicemail messages. In many cases, your service provider has already done this for you. Find the Feature Press 1 keypad keys PRELIMIN 2 OK (+) M > More > Messages M > VoiceMail Setup To enter your voicemail number Tip: You can store your PIN code with the voicemail number. See page 72. store the number Your service provider additionally may store your voicemail number as phonebook entry number 1, so you can use one-touch dial to listen to your voicemail messages. If necessary, see page 70 to store your voicemail number for one-touch dial access. l i a m e c i o V s e g a s s e M 92 RY A Receiving a Voicemail Message When you receive a voicemail message, your phone displays the & (voice message waiting) indicator and a New VoiceMail notication. Press CALL (+) To listen to the message If reminders are turned on, your phone sends a reminder at regular intervals until you close the new message notication, listen to the message, or turn off your phone. Listening to a Voicemail Message Find the Feature M > More > Messages PRELIMIN The phone calls your voicemail number. If no voicemail number is stored, your phone prompts you to store one. Shortcut: If your voicemail number is also stored as phonebook entry number 1, you can press and hold 1 to listen to your voicemail message(s).

> VoiceMail M e s s a g e s V o i c e m a i l 93 MessagesText RY A Text messages are brief messages that you can send and receive. Quick notes are pre-written text messages that you can incorporate into a message and send quickly. Your text message inbox must be set up before you can send and receive messages. The number of messages the inbox can hold depends on the length of the messages, and the number of other messages and drafts stored on your phone. Setting Up the Text Message Inbox Note: In many cases, your service provider has already set up the text message inbox for you. PRELIMIN Press 1 CHANGE (+) 2 S Find the Feature 3 SELECT (+) 4 DONE (-) M > More > Messages M > Inbox Setup To change the Cleanup setting scroll to the number of days you want to keep messages in the inbox, or the number of messages you want to keep select the cleanup setting save the inbox settings t x e T s e g a s s e M 94 Receiving a Text Message Note: Your text message inbox must be set up before you can receive text messages. See page 94. When you receive a text message, your phone displays the X (message waiting) indicator and a New Inbox Message notication, and gives an alert. Press READ (+) To open the message RY A If reminders are turned on, your phone sends a reminder at regular intervals until you close the new message notication, read the message, or turn off your phone. When your phone displays Memory is Full!, you must delete some existing messages to receive new messages. Reading, Locking, or Deleting a Text Message Messages in the text message inbox are sorted from newest to oldest. The oldest messages are deleted automatically as specied by the inbox cleanup setting

(see page 94). If you want to save a message, you should lock it to prevent it from being deleted during cleanup. Find the Feature PRELIMIN M > More > Messages

> Inbox M e s s a g e s T e x t 95 Press 1 S To scroll to the message The following indicators show message status:

Y = unread

= unread (with attachment) d = unread and urgent

= unread and urgent

(with attachment) RY A n = read

= read (with attachment) f = read and locked

= read and locked

(with attachment) open the message close the message delete the message open the Inbox Menu to perform other procedures as described in the following list or DELETE (+) 2 READ (+) 3 BACK (-) PRELIMIN M or The Inbox Menu can include the following options:

Option Create Message Open a new text message. Description t x e T s e g a s s e M 96 Option Call Back Go To Reply RY A Description Call the number in the message header or embedded in the message. Launch the micro-browser and go to a Web address (URL) embedded in the message. Open a new text message, with the senders Reply To number or email address in the To eld. Open a copy of the text message, with an empty To eld. Play a sound le in the message. Lock or unlock the message. Delete the message. Delete all inbox messages. Open the text message inbox setup menu. Forward Play Lock/Unlock Delete Delete All Inbox Setup PRELIMIN Reading Browser Alerts Your networks Web server can send you browser alerts that you can read in your micro-browser. M e s s a g e s T e x t 97 When you receive a browser alert message, your phone displays the X (message waiting) indicator and a New Browser Message notication, and gives an alert. Press GO TO (+) or EXIT (-) To launch the micro-browser and view the message RY A close the new message notication

> Browser Alerts Find the Feature M > More > Messages To view your browser alert messages at any time:

To scroll to a message open the message Press 1 S 2 SELECT (+) PRELIMIN Sending a Text Message You can send a text message to one or more recipients. You can manually enter each recipients phone number or email address, or select numbers/addresses from the phonebook or recent call lists. Note: When you manually enter numbers and/or email addresses, you must insert a space between each entry. t x e T s e g a s s e M 98 Press 1 one time, wait for the space to appear, then enter the next number or email address. Find the Feature M > More > Messages Press 1 CHANGE (+) 2 keypad keys

> Create Message RY A To select To enter one or more phone numbers and/or email addresses Tip: Press 1 to insert a space between each number/address that you enter manually. BROWSE (+) or a S PRELIMIN select numbers/addresses from the phonebook or recent call lists as follows:

highlight Phonebook, Received Calls, or Dialed Calls select the list highlight a number/address add the number/address to the list of message recipients return to the message editor when you are nished store the numbers/addresses select Msg b SELECT (+) c S d ADD (+) e DONE (-) 3 OK (+) 4 CHANGE (+) M e s s a g e s T e x t 99 Press 5 keypad keys To enter the message Note: Message length is limited. A display counter cycles between the number of pages you have written

(number preceded by a *), and the number of characters left on the current page. Network charges are based on the number of pages sent. RY A or BROWSE (+) 6 OK (+) 7 CHANGE (+) 8 S 9 SELECT (+) 10 CHANGE (+) 11 keypad keys PRELIMIN select and insert a quick note message (see page 98) store the message select Priority scroll to the priority you want set the priority select Call enter a number for the recipient to call back store the number nish the message Your phone displays the total pages in the message. 12 OK (+) 13 DONE (-) t x e T s e g a s s e M 100 To send the message Press 14 YES (-) or NO (+) cancel the message or save it in the drafts folder RY A Sending a Quick Note Text Message Quick notes are pre-written text messages that you can incorporate into a message and send quickly (for example, Meet me at ...). You can also create new quick notes. Find the Feature M > More > Messages Press 1 S 2 READ (+)

> Quick Notes To scroll to the quick note read the quick note PRELIMIN or M Description Create a new quick note. Edit the quick note. Option New Edit open the Quick Note Menu to perform other procedures as described in the following list The Quick Note Menu can include the following options:

M e s s a g e s T e x t 101 Option Delete Send Description Delete the quick note. Open a new message with the quick note in the Msg eld. Viewing the Status of Sent Text Messages Messages that you send are stored in the outbox. RY A

> Outbox M > More > Messages Messages in the outbox are sorted from newest to oldest. The following indicators show message status:

= sending in progress Y = sent m = sending failed Find the Feature PRELIMIN t x e T s e g a s s e M 102 Ring Styles Your phone rings or vibrates to notify you of an incoming call or other event. This ring or vibration is called an alert. You can select one of ve different ring styles:

W = soft ring X = vibrate and ring RY A V = loud ring Z = vibrate Y = silent The ring style indicator in the display shows the current ring style (see page 23). Each ring style contains settings for specic event alerts, ringer ID, and ringer and keypad volume. Selecting a Ring Style Find the Feature M > Ring Styles > Style PRELIMIN Customizing a Ring Style Change Style Settings You can change the alerts that notify you of the following events: incoming calls, text messages, voicemail To scroll to the ring style select the ring style Press 1 S 2 SELECT (+) R i n g S t y l e s 103 Press 1 S 2 CHANGE (+) 3 S 4 SELECT (+) messages, data calls, fax calls, alarms, and reminders. Any changes you make are saved to the current ring style. Find the Feature Note: Style represents the current ring style. M > Ring Styles

> Style Detail RY A To scroll to the event select the event scroll to the alert you want select the alert Activate and Deactivate Ringer IDs When ringer IDs are turned on, your phone uses distinctive ringer alerts to notify you of incoming calls or messages from specic entries stored in your phonebook. To assign a ringer ID to a phonebook entry, see page 70. Find the Feature PRELIMIN Press 1 S 2 CHANGE (+) 3 S 4 SELECT (+) M > Ring Styles

> Style Detail Note: Style represents the current ring style. To scroll to Ringer IDs change the ringer IDs setting scroll to On or Off select the option s e l y t S g n i R 104 Press 1 S 2 S left or right 3 OK (+) Set Ringer or Keypad Volume Find the Feature Note: Style represents the current ring style. M > Ring Styles

> Style Detail To scroll to Ring Volume or Key Volume scroll to the desired volume conrm the new volume RY A M > Media Center Creating Alert Tones You can create and store custom alert tones on your phone. The tones appear in the list of available alerts. Create a Tone Find the Feature PRELIMIN To scroll to [New Tone]

select [New Tone]

select Notes enter notes (see following section) store the notes select Name enter a name for the tone Press 1 S 2 SELECT (+) 3 CHANGE (+) 4 keypad keys 5 OK (+) 6 CHANGE (+) 7 keypad keys

> My Tones R i n g S t y l e s 105 Press 8 OK (+) 9 DONE (-) To store the name store the tone Enter Notes Use the keypad keys to enter each note. Press a key multiple times to cycle through its notes or options (pitch, octave, or length). The default setting for a new tone is a quarter note in octave two. RY A 3 2 Display Key 1 PRELIMIN Description set octave one set octave two set octave three note A note B note C note D note E note F note G rest sharp at quarter note or rest half note or rest whole note or rest 1 2 3 A B C D E F G R

b q h w 4 7 0 s e l y t S g n i R 106 Enter a note as follows:

Task Change the octave Select the note

(required) Change a note to a sharp or at Action Set the new octave (1, 2, or 3) before selecting the note. The octave applies to all following notes until you change it again. Press a keypad key. RY A PRELIMIN Enter a sharp or at (# or b) after selecting the note. Some sharps and ats are played as standard notes. For example, B# is the same as C. Press to scroll to valid notes when entering a new note. Set the new length (q, h, or w) after selecting the note. The length applies to all following notes until you change it again. Enter one or more rests (R characters) as needed in the tone sequence. Set the length of the rest by entering a q, h, or w character after the rest, just as you would for a note. Press M to enter the Compose Menu, and select Play All to play the notes you have entered. Change a notes length Add a rest Listen to a new tone as you compose it R i n g S t y l e s 107 Example Press the following keys to play this sequence of notes and rests in octave three: C (quarter note), E at (quarter note), half rest, and G (whole note):

Press 1 1 1 1 2 2 2 2 Display RY A To set octave three enter a quarter note C 3 C Eb Rh Gw 5 4 0 0 0 enter a whole quarter note E at 4 4 4 0 0 enter a half rest note G 3 3 3 7 7 enter a PRELIMIN Press 1 S 2 M 3 S 4 SELECT (+) Play a Tone Find the Feature M > Media Center

> My Tones To scroll to the tone open the My Tones Menu scroll to Play select Play s e l y t S g n i R 108 To play the tone again Press 5 PLAY (+) or CANCEL (-) return to my tones list RY A

> My Tones Edit a Tone You cannot edit the predened alert tones included with your phone. To edit a custom alert tone:

Find the Feature M > Media Center Press 1 S 2 EDIT (+) 3 S To scroll to the tone open the tone details scroll to the item you want to edit (Name or Notes) select the item enter new text or notes store the new text or notes save your changes PRELIMIN Delete a Tone You cannot delete the predened alert tones included with your phone. To delete a custom alert tone:

Find the Feature 4 CHANGE (+) 5 keypad keys 6 OK (+) 7 DONE (-) M > Media Center

> My Tones R i n g S t y l e s 109 Press 1 S 2 M 3 S 4 SELECT (+) 5 YES (-) To scroll to the tone open the My Tones Menu scroll to Delete select Delete conrm the deletion RY A Setting Reminders A reminder is an alert that rings or vibrates at regular intervals to notify you about a voicemail or text message that you have received. Find the Feature M > Ring Styles

> Style Detail

> Reminders Note: Style represents the current ring style. Press 1 S PRELIMIN 2 SELECT (+) To scroll to Beep or Vibrate to set the reminder alert type, or Off to turn off all reminders select the reminder alert s e l y t S g n i R 110 Shortcuts Your phone includes several standard shortcuts. You can create additional shortcuts to frequently used menu items. Standard Shortcuts The following shortcuts are pre-programmed in your phone. You cannot edit or delete these shortcuts. RY A exit the menu system see your phone number go to the dialed calls list To zoom in/out on your phone display Do This Press M, then press and hold M (within two seconds) Press M #

Press N Press O PRELIMIN Creating a Shortcut You can create a keypad shortcut plus an optional voice shortcut to a menu item. A voice shortcut takes you directly to the menu item when you say the shortcut name. Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your S h o r t c u t s 111 mouth, and speak directly into the phone in a normal tone of voice. Do This 1 Press M 2 Press S 3 Press and hold M 4 Press YES (-) 5 Press CHANGE (+) To enter the menu system scroll to the menu item open the shortcut editor view shortcut options change the keypad shortcut number RY A select the default keypad shortcut number scroll to Voice to assign a voice shortcut begin recording record the shortcut name conrm the shortcut name store the shortcut name or or Press S Press DONE (-) 6 Press RECORD (+) 7 Press and release PRELIMIN 8 Press and release the voice key and repeat the name 9 Press DONE (-) the voice key and say the shortcuts name

(in two seconds) s t u c t r o h S 112 Using Shortcuts Use a Keypad Shortcut Press 1 M 2 a number key To open the main menu go to the menu item with that shortcut number RY A

> More > Shortcuts

> shortcut name To open the menu go to the menu item with that shortcut name M Select a Shortcut From the List Find the Feature Use a Voice Shortcut Do This 1 Press M 2 Press and release PRELIMIN the voice key and say the shortcuts name

(in two seconds) S h o r t c u t s 113 Voice Notes RY A You can use the voice note feature to record personal messages and phone calls on your phone. Recording a Voice Note Use this procedure to record a voice note from the idle display, or to record a phone call in progress. Your phone plays an alert tone to notify the other party that the call is being recorded. Note: Recording phone calls is subject to varying state and federal laws regarding privacy and recording of conversations. Tip: Make your recording in a quiet location. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice. PRELIMIN voice key for the duration of the recording. Do This 1 Press and hold the 3 Release the voice key to stop recording. voice note. The phone displays the voice note number and total recording time. Result The phone sounds an alert tone and begins recording. 2 Speak your voice note. The phone records the s e t o N e c i o V 114 Viewing the Voice Notes List Find the Feature M > Voice Notes Locked voice note Down scroll arrow 5 f V Voice Notes 6)2:20pm 4/01.. 5)4:05pm 3/31.. 4)4:00pm 3/31.. 3)11:05am 3/31. 2)9:00am 3/31.. 1)7:15pm 3/30.. EXIT e PLAY

Time/date recorded RY V A Play the highlighted voice note o i c e N o t e s Return to previous screen Press M to open the Voice Notes Menu PRELIMIN 115 Playing a Voice Note Find the Feature M > Voice Notes Press 1 S 2 PLAY (+) To scroll to the voice note play the voice note RY A When you connect an optional Motorola Original headset or FM Stereo Radio Headset accessory to your phone, playback is automatically routed to the headset. Tip: You can play a voice note while taking a call. It will not be transmitted to the other party. Playback Screen The playback screen is displayed as the voice note plays.

V 5 Voice Note 3 Indicates

% played PRELIMIN Press M to open the Voice Notes Menu Press S left to rewind Return to previous screen SAVE e DELETE

Voice note number Press S right to fast forward Erase voice note s e t o N e c i o V 116 Voice Note Controls Stop playback and go to Voice Notes Menu. Stop playback and return to voice notes list. Raise or lower playback volume of voice note. Press left to rewind three seconds, resume playing. Press left and hold to rewind to the beginning. PRELIMIN Press any number key to alternately stop and start playback. Press up/down to stop playback and scroll to next voice note. If voice note is unlocked, stop playback and display Delete Voice Note?

RY V A If voice note is locked, stop playback and unlock voice note. o i c e N o t e s Press right to fast forward three seconds, resume playing. Press right and hold to fast forward to end. When playback is complete, press right to restart. 117 Locking and Unlocking a Voice Note Lock a voice note to prevent it from being deleted. You must unlock a voice note to delete it. To lock or unlock a voice note during playback:

M > Voice Notes RY A To scroll to the voice note open the Voice Notes Menu scroll to Lock or Unlock lock or unlock the voice note To open the Voice Notes Menu scroll to Lock or Unlock lock or unlock the voice note Find the Feature Press 1 S 2 M 3 S 4 SELECT (+) Press 1 M 2 S 3 SELECT (+) PRELIMIN Playback stops when you lock or unlock a voice note. Press any number key to resume playback. s e t o N e c i o V 118 Deleting a Voice Note Find the Feature M > Voice Notes Press 1 S 2 M 3 S 4 SELECT (+) 5 YES (-) or To scroll to the voice note open the Voice Notes Menu scroll to Delete or Delete All select the highlighted option conrm the deletion RY V A cancel deletion o i c e N o t e s You cannot delete a locked voice note. You cannot recover a deleted voice note. Notes:

NO (+) PRELIMIN 119 Micro-Browser The micro-browser lets you access Web pages and Web-based applications on your phone. Contact your service provider to set up access, if necessary. RY A Starting a Micro-Browser Session Find the Feature M > Web Browser > Home To scroll to a bookmark, service, or application select the item 2 SELECT (+) Press 1 S PRELIMIN Shortcut: If you open a text message with a Web address

(URL) embedded in it, you can press M > Go To to launch the micro-browser and go directly to the URL. If you are unable to establish a network connection with the micro-browser, contact your service provider. r e s w o r B

o r c i M 120 Interacting With Web Pages RY A To scroll through text, or highlight a selectable item select the highlighted item call the highlighted phone number from the micro-browser enter information Tip: Press DELETE (*) to delete one letter at a time if you make a mistake. go back to the previous page open the Browser Menu Press S SELECT (+) N keypad keys, followed by OK (+) BACK (*) M PRELIMIN M i c r o

B r o w s e r 121 Calculator You can use your phone as a calculator and currency converter. Calculating Numbers Find the Feature M > Calculator RY A To enter a number highlight a calculator function perform the function

V 5 Selected function appears here Press 1 number keys 2 S 3 SELECT (+) PRELIMIN Press S to highlight a function Exit the calculator

MR =

EXIT e Calculator MS MC

. C

0 SELECT

- X

Press M to open the Calculator Menu Entered number Perform the highlighted function r o t a l u c l a C 122 The calculator can perform the following functions:

Function

. C CE MC MR

x

MS RY A Description Insert a decimal point Clear the calculation Clear entry (replaces C when you enter subsequent values in a calculation) Add Subtract Multiply Divide Store the value in memory (overwrites current stored value) Clear the value stored in memory Replace the displayed value with the value stored in memory Calculate the result Divide the displayed value by 100 Change the entrys sign

(positive/negative) Calculate the exchange rate PRELIMIN

C a l c u l a t o r 123 Converting Currency The currency converter works just like the calculator, but uses the $ (currency) function:

M > Calculator M > Exchange Rate RY A To enter the exchange rate store the exchange rate enter the amount to convert

(amount to multiply by the exchange rate) highlight the $ function perform the conversion Find the Feature Press 1 number keys 2 OK (+) 3 number keys 4 S 5 SELECT (+) PRELIMIN r o t a l u c l a C 124 Get It Now You can download a variety of applications onto your phone, such as entertainment (games, ring tones, images) and productivity tools (expense tracking, news delivery, ight information). RY A These applications are stored in the Get It Now folder on your phone. Downloading an Application Find the Feature Press 1 START (-) M > Get It Now

> Get It Now Shop PRELIMIN To connect to Get It Now shop Your phone displays a list of application categories scroll to a category view a list of applications available for downloading scroll to the application you want to download 2 S 3 SELECT (+) 4 S G e t I t N o w 7 A A 125 Press 5 SELECT (+) RY A To view pricing options for the application Pricing options vary by application. You may be presented with options to purchase the application, subscribe for a monthly fee, or pay an unlimited usage charge. scroll to the purchase you wish to make select your purchase conrm your purchase Your phone downloads and installs the application. The phone then asks if you wish to run the application. launch the application exit Get It Now shop 6 S 9 YES (-) 7 SELECT (+) 8 YES (-) PRELIMIN NO (+) or w o N t I t e G 7 A A 126 Launching an Application Find the Feature M > Get It Now

> application Notes:

RY A If you receive an incoming call while using an application, your phone pauses the application, noties you of the call, and prompts you to answer. When the call ends, the phone gives you the option to return to the application. If you receive an incoming call while downloading an application, your phone forwards the call to your voicemail. If you do not have voicemail, the caller receives a busy signal. PRELIMIN Disabling or Removing an Application The memory capacity of your phone determines how many applications you can have installed at one time. To free up memory for a new application, you can temporarily disable an existing application, or permanently remove the existing application from your phone. When you disable an application, your phone removes the application from memory but retains the purchase information. You can restore the disabled application at a later time for no additional charge. When you remove an application, your phone completely removes the application from the phone. To reinstall the 7 G e t I t N o w A A 127 application, you must download it and pay for it again as described on page 125. Find the Feature M > Get It Now

> Get It Now Shop RY A To view the list of applications installed on your phone scroll to the application you want view the applications memory usage information, and expiration information, if applicable temporarily disable the application permanently remove the application from memory conrm your selection Your phone disables or removes the application Press 1 OPTIONS (+) 2 S or 3 SELECT (+) REMOVE (+) 4 DISABLE (-) PRELIMIN 5 YES (-) Note: Airtime charges apply to remove an application subscription. Contact your service provider for more information. w o N t I t e G 7 A A 128 Restoring a Disabled Application Find the Feature M > Get It Now

> Get It Now Shop RY A To view the list of applications installed on your phone scroll to the application you want to restore view the applications memory usage information, and expiration information, if applicable restore the application permanently remove the application from memory Press 1 OPTIONS (+) 2 S 3 SELECT (+) 4 RESTORE (-) REMOVE (+) or PRELIMIN Note: Airtime charges apply to restore an application. Contact your service provider for more information. G e t I t N o w 7 A A 129 Viewing Get It Now Information and History To view the total amount of phone memory available for Get It Now applications, and the memory used for current installed applications:

Find the Feature M > Get It Now RY A

> Get It Now Shop

> Options

> Information M > Get It Now

> Get It Now Shop

> Options > View Log Your phone lists the date(s) on which application activities occurred. Highlight a date to view the action performed on that date. Your phone documents the following activities:

To view Get It Now version information, and a log of application activities:

Find the Feature PRELIMIN download and install application disable application remove application restore application end application subscription w o N t I t e G 7 A A 130 Adjusting Your Settings Setting the Menu View You can set your phone to display the main menu as graphic icons (the default setting) or as a text-based list. Find the Feature M > Settings RY A

> Personalize

> Main Menu > View Reordering Menu Items You can reorder the items in your phones main menu. Find the Feature M > Settings Press 1 S 2 SELECT (+) To scroll to Icons or List select the menu view PRELIMIN To scroll to a menu item grab the menu item move the item to a new location in the menu insert the menu item Press 1 S 2 GRAB (+) 3 S 4 INSERT (+)

> Personalize

> Main Menu > Reorder A d j u s t i n g Y o u r S e t t i n g s 131 Find the Feature Personalizing Soft Keys and Menu Icons You can change the menu feature icons and soft key labels

(left - and right +) that appear in the idle display, to access different main menu items from the idle display. M > Settings RY A

> Personalize

> Home Keys To scroll to Scroll Up, Scroll Down, Scroll Left, Scroll Right, Left Soft Key, or Right Soft Key select the icon or soft key scroll to a menu feature conrm the menu feature Press 1 S 2 CHANGE (+) 3 S 4 SELECT (+) PRELIMIN Find the Feature Wallpaper You can set a picture or an animation as a wallpaper

(background) image in your phones idle display. Note: When you set an animation as a wallpaper image, only the rst frame of the animation is displayed. M > Settings

> Personalize

> Wallpaper s g n i t t e S r u o Y g n i t s u j d A 132 Press 1 S 2 CHANGE (+) 3 S up or down RY A To scroll to Picture open the picture viewer scroll to a picture/animation Scroll to (None) to turn off the wallpaper image. select the image scroll to Layout adjust the image layout scroll to Center or Tile Center places the image in the center of the display and, if necessary, shrinks the image to ll the display. Tile lls the display with adjacent copies of the image conrm the layout setting save wallpaper settings 4 SELECT (+) 5 S 6 CHANGE (+) 7 S 8 SELECT (+) 9 DONE (-) PRELIMIN Screen Saver You can set a picture or an animation as a screen saver image in your phones idle display. The image is displayed when no activity is detected for a specied time period. A d j u s t i n g Y o u r S e t t i n g s 133 Find the Feature The screen saver image is shrunk to ll the display, if necessary. An animation repeats for one minute, then the rst frame of the animation is displayed. M > Settings

> Personalize

> Screen Saver RY A To scroll to Picture open the picture viewer scroll to a picture/animation Scroll to (None) to turn off the screen saver image. select the image scroll to Delay set the delay interval scroll to the inactivity interval that triggers the screen saver conrm the delay setting save screen saver settings Press 1 S 2 CHANGE (+) 3 S up or down 4 SELECT (+) 5 S 6 CHANGE (+) 7 S PRELIMIN 8 SELECT (+) 9 DONE (-) Find the Feature Setting Display Color You can select the color palette that your phone uses to display indicators, highlights, and soft key labels. M > Settings

> Personalize

> Color Style s g n i t t e S r u o Y g n i t s u j d A 134 Hiding or Showing Location Information Your phone can use the automatic location information (ALI) feature to tell the network where you are physically located. When ALI is set to Location On, your phone displays the N

(ALI on) indicator. Services may use your known location to provide useful information (for example, driving directions, or the location of the nearest bank). Your phone prompts you when the network or a service asks for your location. You can refuse at this point. When ALI is set to 911 Only, your phone displays the M

(ALI off) indicator, and the phone does not send location information unless you call the emergency phone number

(such as 911). Find the Feature RY A M > Settings > Location PRELIMIN You can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phones headset jack and set the phone to operate in one of three To scroll to Location On or 911 Only select the setting TTY Operation Press 1 S 2 SELECT (+) TTY modes. A d j u s t i n g Y o u r S e t t i n g s 135 Notes:

Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY device to your phone. Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as necessary to minimize the error rate. For optimal performance, your phone should be at least 12 inches (30 centimeters) away from the TTY device. Placing the phone too close to the TTY device may cause high error rates. RY A Set TTY Mode When you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected. Find the Feature PRELIMIN Press 1 S 2 CHANGE (+) 3 S 4 SELECT (+) M > Settings

> Initial Setup

> TTY Setup To scroll to TTY Setup change the TTY mode scroll to the TTY mode select the TTY mode s g n i t t e S r u o Y g n i t s u j d A 136 The TTY Setup menu can include the following options:

Option TTY VCO HCO Voice Description Transmit and receive TTY characters Receive TTY characters but transmit by speaking into the microphone Transmit TTY characters but receive by listening to the earpiece Return to normal voice mode RY A When your phone is in a TTY mode, the international TTY symbol and the mode setting are shown in the display during an active digital TTY call. You can press TTYMODE (-) to change the mode setting. Switch to TTY Mode During a Voice Call Press 1 M 2 S 3 SELECT (+) 4 S 5 SELECT (+) PRELIMIN To open the Call menu scroll to TTY Setup display the TTY Setup menu scroll to the TTY mode select the TTY mode Return to Voice Mode To return to normal voice mode, select Voice from the TTY Setup menu as described on page 136. A d j u s t i n g Y o u r S e t t i n g s 137 Hands-Free Use You can purchase an optional Motorola Original hands-free car kit or headset for your phone. These accessories provide alternative ways for you to use your phone without using your hands. Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. Automatic Answer You can set your phone to automatically answer calls after two rings (four seconds) when connected to a car kit or headset. RY A Press 1 S Find the Feature PRELIMIN 2 SELECT (+) 3 S 4 CHANGE (+) 5 S 6 SELECT (+) To scroll to Car Settings or Headset select the feature scroll to Auto Answer select Auto Answer scroll to On or Off conrm the setting M > Settings s g n i t t e S r u o Y g n i t s u j d A 138 Automatic Hands-Free You can set your phone to automatically route calls to a car kit when it detects a connection. Find the Feature M > Settings

> Car Settings

> Auto Handsfree RY A To scroll to On or Off conrm the setting Press 1 S 2 SELECT (+) Power-Off Delay When your phone is connected to a car kit, you can set it to stay on for a period of time after you switch off the ignition. This prevents the phone from draining your vehicle battery, but leaves the phone on long enough that you do not have to re-enter your unlock code when making short stops. Note: This feature may not work with all car ignition switches. Caution: If you select Continuous, the phone does not power off when you turn off the ignition. Be careful not to drain your vehicle battery if you select this option. Find the Feature PRELIMIN

> Car Settings

> Power-Off Delay M > Settings To scroll to the time delay Press 1 S A d j u s t i n g Y o u r S e t t i n g s 139 Press 2 SELECT (+) To conrm your selection Charger Time When your phone is connected to a car kit, you can set it to charge itself for a specied time period after you switch off the ignition. This helps ensure that the phone battery gets fully charged while the vehicle is parked. Note: This feature may not work with all car ignition switches. RY A M > Settings

> Car Settings

> Charger Time To scroll to the charge time conrm your selection Find the Feature Press 1 S 2 SELECT (+) PRELIMIN s g n i t t e S r u o Y g n i t s u j d A 140 Data and Fax Calls An optional Motorola Original data kit (which includes a cable connector) lets you transfer data between your phone and a computer, Palm OS compatible device, or Microsoft RY D A a t a a n d F a x C a l l s Windows CE, Pocket PC, or Handheld PC device. You can:

Synchronize phonebook information between your phone and a computer or PDA. Use your phone as a modem to connect to the Internet. Use your phone to send and receive data and fax calls on your computer or hand-held device. PRELIMIN Making a Cable Connection Install the Software To transfer data between your phone and computer, you must install the software included with the Motorola Original data kit. See the data kits user guide for more information. Attach the Cable Use a Motorola Original serial cable or Motorola Original USB cable to connect your phone to the external device. Note: Not all devices are compatible with a cable connection. Check your computer or hand-held device to determine the type of cable you need. 141 RY A Serial Cable Do This 1 Plug the serial cable into the detachable head. Make sure that the Motorola logo on the detachable head and the metal shielding on the serial cable plug are both facing you. 2 With the Motorola logo and the phone both facing you, plug the detachable head into the phones accessory connector port. PRELIMIN 3 Plug the other end of the cable into the serial interface connection on the device and tighten the screws. if present. s l l a C x a F d n a a t a D 142 USB Cable Do This 1 Plug the end of the cable with the Motorola logo into the phones accessory connector port. Make sure that the logo and the phone are both facing you. RY D A a t a a n d F a x C a l l s 2 Plug the other endthe USB connectioninto the USB port on the external device. PRELIMIN Synchronizing Data You can synchronize phonebook and datebook information between your phone, computer, and PDA with Starsh TrueSync software, a Motorola accessory product. See the TrueSync user guide for more information. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. Sending a Data or Fax Call Use this procedure to send data or a fax from a connected device. Connect your phone to the device as described on pages 141-143 and do the following:

143 To 2 Open the application on your computer Do This 1 Check the phone make sure that the phone is connected and powered on place the call through the application (such as dial-up-networking or fax) Note: You cannot dial data or fax numbers through your phones keypad. You must dial them through your computer. close the call and connection when the transfer is complete RY A Receiving a Data or Fax Call Use this procedure to transfer data or a fax to your computer or hand-held device. Connect your phone to the device as described on pages 141-143. Set Up Your Phone 3 End the call from the connected device PRELIMIN Do This 1 Press CHANGE (+) 2 Press S Find the Feature M > Settings

> Connection

> Incoming Call To select Next Call scroll to Data In Only or Fax In Only s l l a C x a F d n a a t a D 144 Do This 3 Press SELECT (+) 4 Connect your phone to the device To set the call format enable the data or fax transfer a t a a n d F a x C a l l s RY D A Note: You cannot answer incoming voice calls when your phone is in data or fax mode. Any voice calls you receive are treated as unanswered calls. To return a voice call, reset your phone to voice mode as described on page 145. Transfer the Data or Fax Your phone noties you when the data or fax call arrives, and transfers the call to the connected device. Use the application running on the device to answer the call. End the Data/Fax Connection When the data or fax transfer is complete, end the call from the connected device to close the connection. Reset Normal Voice Operation After making a data or fax call, you must reset your phone to resume normal voice operations. Find the Feature PRELIMIN Your phone also reverts to normal voice operations when you turn it off and then turn it back on.

> Connection

> Incoming Call

> Next Call > Normal M > Settings 145 Security RY A Assigning a New Code or Password Your phones unlock code is originally set to 1234, and the security code is originally set to 000000. Your service provider may reset these numbers before you receive your phone. If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information. The unlock code must contain four digits, and the security code must contain six digits. Notes:

PRELIMIN Your service provider may retain your phones security code for customer service purposes. In this case, you will not be able to use phone features that require you to enter the security code. If the unlock code is the only code you can change, the New Passwords menu is not available. In this case, change the unlock code by selecting: M > Settings

> Security > Phone Lock > Unlock Code. To change a code or password:

M > Settings > Security Find the Feature

> New Passwords y t i r u c e S 146 Press 1 S 2 CHANGE (+) 3 keypad keys 4 OK (+) 5 keypad keys 6 OK (+) 7 keypad keys 8 OK (+) To scroll to the code or password select the code or password enter your old code submit your old code enter the new code assign the new code re-enter the new code conrm the new code RY A If You Forget a Code or Password If you forget your security code, contact your service provider. If you forget your unlock code, try entering 1234 or the last four digits of your phone number. If that does not work, do the following at the Enter Unlock Code prompt:

PRELIMIN To go to the unlock code bypass screen enter your security code submit your security code 2 keypad keys 3 OK (+) Press 1 M S e c u r i t y 147 Locking and Unlocking Your Phone You can lock your phone manually or set the phone to lock automatically whenever you turn it off. To use a locked phone, you must enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer. You can make emergency calls on your phone even when it is locked. For more information, see page 32. Lock Your Phone Manually Find the Feature M > Settings > Security RY A

> Phone Lock

> Lock Now To enter your unlock code lock the phone Press 1 keypad keys 2 OK (+) PRELIMIN Find the Feature Press 1 keypad keys 2 OK (+) M > Settings > Security

> Phone Lock

> Automatic Lock > On To enter your unlock code activate automatic lock Set Your Phone to Lock Automatically You can set your phone to lock every time you turn it off. y t i r u c e S 148 Unlock Your Phone At the Enter Unlock Code prompt:

Press 1 keypad keys 2 OK (+) To enter your unlock code unlock your phone RY A Press M *

To lock or unlock your keypad Locking and Unlocking Your Keypad You can lock your phone keypad to prevent accidental keypresses (for example, when carrying your phone in a purse or pocket). PRELIMIN are restricted. Note: Incoming calls and messages unlock the keypad. Restricting Calls You can stop all incoming and/or outgoing calls, or you can restrict outgoing calls to the numbers stored in your phonebook. Notes:

You can make emergency calls when outgoing calls S e c u r i t y 149 Your phone still receives incoming text messages when incoming calls are restricted. Find the Feature M > Settings > Security

> Restrict Calls RY A To enter your unlock code open the restrict calls menu scroll to Outgoing Calls or Incoming Calls select the option change the Allow setting scroll to All, None, or Phonebook select the allowed calls Press 1 keypad keys 2 OK (+) 3 S 7 SELECT (+) 4 CHANGE (+) 5 CHANGE (+) 6 S PRELIMIN Tip: The phonebook is not locked when you restrict outgoing calls to numbers stored in the phonebook. To prevent a user from adding (and then calling) a new phonebook entry, you may want to lock the phonebook. See the Lock Application item on page 59. y t i r u c e S 150 Troubleshooting Check these questions rst if you have problems with your phone. If you need additional help, contact the Motorola Customer Call Center at 1-800-331-6456 (United States) or 1-800-461-4575 (Canada). RY A Question Is your phone set up correctly?

Is your battery charged? Do you see B in the display?

Answer Press M #. If you do not see your phone number, contact your service provider. The battery level indicator should have at least one segment showing (C). If it does not, recharge your battery. See page 18. Make sure that your antenna is fully extended. The signal strength indicator should have at least one segment showing (1). If it does not, move to an area with a stronger signal to use your phone. While on a call, press the upper volume key on the side of your phone. PRELIMIN Does the handset have a signal? Do you see j in the display?

Is the earpiece volume too low?

T r o u b l e s h o o t i n g 151 Question Is the other party unable to hear you?

RY A Answer Make sure that your antenna is fully extended and that your phone is not muted. Press UNMUTE (+) if necessary to unmute the phone. Also, make sure that your phones microphone is not blocked by its carrying case or a sticker. Dropping your phone, getting it wet, or using a non-Motorola battery or battery charger can damage the phone. The phones limited warranty does not cover liquid damage or damage caused from using non-Motorola accessories. Has the phone been damaged, dropped, or gotten wet?

Was a non-Motorola battery or battery charger used?

PRELIMIN Problem My phone was stolen. To whom should I report this?

I forgot my password. The following refer to specic problems:

Solution Report a stolen phone to the police and to your service provider

(the company that sends you your monthly wireless service bill). See page 147. g n i t o o h s e l b u o r T 152 Problem I pressed the power key, but nothing happened. Solution Be sure to press and hold P (the power key) until the display appears and you hear an alert. This could take several seconds. If nothing happens, check that a charged battery is installed. See page 17. Enter the factory-preset unlock code (1234), or the last four digits of your phone number. If this fails, call your service provider (the company that sends you your monthly wireless service bill). The application you want is locked. If you do not know the unlock code, see page 147. RY A The display says: Enter Unlock Code. How do I unlock my phone?

My phone asks for an unlock code when I try to open a feature. My phone does not ring. PRELIMIN If you see t or y in the display, then the ringer is turned off. See page 103. Also, the ringer may be set to Silent even though your phone is set to an audible ring style. See page 103. T r o u b l e s h o o t i n g 153 Problem My phone rings even though I selected the Silent (or Vibrate) ring style. I tried to place a call and heard an alternating high/low tone. Solution The ringer may be set to play a tone even though your phone is set to a silent ring style. See page 103. RY A I cannot send/

receive calls. Your call did not reach the wireless system. You may have dialed the number too soon after turning the phone on. Wait until the display says Ready before making a call. Make sure that your antenna is fully extended and that you have a phone signal (see the Signal Strength Indicator item on page 24). Avoid electrical or radio interference, and obstructions such as bridges, parking garages, or tall buildings. Your phone also may have the Restrict Calls feature turned on. If you know the unlock code, you can change this setting in the security menu (M > Settings

> Security). PRELIMIN g n i t o o h s e l b u o r T 154 Problem My phone has poor reception and drops calls. RY A Solution Make sure that your antenna is fully extended and is not bent or damaged. Also, make sure you have a phone signal (see the Signal Strength Indicator item on page 24). Stay clear of any obstructions such as bridges, parking garages, or tall buildings. While on a call, press the upper volume key. The display should show the volume increasing. Also, make sure that your phones earpiece is not blocked by its carrying case. Before you can use text messages, you must set up the message inbox. See page 94. To see the most recent calls you dialed or received:

M > More > Recent Calls

> Received Calls I cannot hear others on my phone. I cannot open my message inbox. How do I see the calls I sent or received?

PRELIMIN or Dialed Calls T r o u b l e s h o o t i n g 155 Problem My phone will not send voicemail commands, passwords, or other codes. Solution Your phone sends commands and passwords as DTMF tones. You can set your phones DTMF tones to be Long, Short, or Off. If you have trouble sending numbers, try changing the DTMF setting. 1 From the idle display, press:

RY A

> Other Settings

> Initial Setup > DTMF 2 Press S to scroll to Long or Short (some analog networks may not recognize short tones). M > Settings 3 Press SELECT (+) to select it. Use the Contrast feature to change the level of contrast in your display. See page 61. You can also use the Backlight feature to change the length of time that the display backlight stays on. See page 60. My phones display is too dark. PRELIMIN g n i t o o h s e l b u o r T 156 Problem My battery didnt last as long as I expected. What can I do to extend battery life I am unable to record a voice note, voice name, or voice shortcut. Solution Your batterys performance is affected by charge time, feature use, temperature changes, backlight use, and other factors. For tips on extending your battery life, see page 28. RY A Try moving to a quieter location to make your voice recording. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone in a normal tone of voice. Your phone must be set to a TTY mode for the phone to detect your TTY device. See page 135. PRELIMIN The beep indicates that you are set up correctly. If you did not hear a beep, make sure that both ends of the data cable are connected the smaller end to your phone and the larger end to your computer. Also, your computer may have deactivated the port to save power. Try opening an application that uses the port, like a fax or dial-up application, to automatically activate the port. My TTY device doesnt work with my phone. I plugged the data cable into my phone but my phone did not beep. How do I know if the data cable is ready to go?

T r o u b l e s h o o t i n g 157 Problem My phone beeped when I attached the data cable, but my data and fax applications dont work. RY A Solution You must be in an area with digital coverage. Check your phones display for the digital signal indicator (F). Some wireless networks may not support data or fax transmission. If you see the digital indicator, but you are roaming on an unfamiliar network, this may be the case. Also, remember that data and fax transmission usually requires a subscription. Call your service provider for more information. 19200 Kbps is the data transfer rate of the connection between your computer and the phone. The rate of the connection between your phone and the network is displayed on your phone, and will be either 14400 or 9600 Kbps. Try pressing on your phone. Or try disconnecting the cable or turning off the phone. If possible, always close the connection through your computer, as these alternative methods may disrupt the application on your computer. PRELIMIN When sending data with the data cable, why does the computer show a connection rate of 19200 Kbps?

I cant end my data call by closing the application on my computer. What can I do?

g n i t o o h s e l b u o r T 158 Problem I launched the micro-browser but the display says:

Service Not Available. Solution You may be in an area without service. If you have wireless service, look in the display for the digital signal indicator (F). If you do not see the indicator, you may be in an area that has only analog service or no service at all. If you see the digital signal indicator, you may be connected to a digital network that does not support Internet access. Try again in a few minutes. The servers may be temporarily busy. RY A I launched the micro-browser but the display says:

Data Server Unavailable. PRELIMIN T r o u b l e s h o o t i n g 159 Programming Instructions Follow this procedure if you need to program your phones phone number(s) or system ID. Note: Programming is normally done by a trained technician at the site of purchase. Users should not make changes other than ones in the following procedure. Before programming, ask your service provider for your:

RY A 10-digit MIN (Mobile Identication Number) 8- to 15-digit IMSI (International Mobile Service 8- to 15-digit MDN (Mobile Directory Number) 5-digit AMPS Sys ID number 5-digit CDMA Sys ID number Identier) PRELIMIN

#, M, M

(These keys spell P-H-O-N-E

+ #, M, M.) Do This 1 Press 7, 4, 6, 6, 3, 3 Press SELECT (+) 2 Press S To open the user activation menu scroll to NAM1 (phone number 1) or NAM2

(phone number 2) open the NAM programming menu 160 Do This 4 Press the keypad keys for the 10-digit MIN 5 Press OK (+) 6 Similarly, enter appropriate numbers for the IMSI, MDN, AMPS Sys ID, and CDMA Sys ID To open the MIN editor and enter the new MIN store the new MIN RY A close the NAM programming menu close the user activation menu 7 Press DONE (-) 8 Press EXIT (-) PRELIMIN 161 Specic Absorption Rate Data RY A The Motorola T720 CDMA wireless phone meets the governments requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by Health Canada for Canada. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC and by Health Canada is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certied to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. SAR values for the T720 CDMA phone are provided separately.2 PRELIMIN 162 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Additional information on Specic Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:

http://phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site:

http://www.cwta.ca 1. RY A In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. ITC02-155 PRELIMIN 163 The U.S. Food and Drug Administration's Center for Devices and Radiological Health Consumer Update on Mobile Phones RY A Additional Health and Safety Information FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is knownand what remains unknownabout whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions. Why the concern?

Mobile phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave range while being used. They also emit very low levels of radio frequency energy (RF), considered non-

signicant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these questions, no clear picture of the biological effects of this type of radiation has emerged to date. Thus, the available science does not allow us to conclude that mobile phones are absolutely safe, or that they are unsafe. However, the available scientic evidence does not demonstrate any adverse health effects associated with the use of mobile phones. What kinds of phones are in question?

Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversation. These types of mobile phones are of concern because of the short distance between the phone's antenna PRELIMIN 164 RY A the primary source of the RFand the person's head. The exposure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a person's RF exposure decreases rapidly with distance from the source. The safety of so-called cordless phones, which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned. How much evidence is there that hand-held mobile phones might be harmful?

Briey, there is not enough evidence to know for sure, either way;

however, research efforts are on-going. The existing scientic evidence is conicting and many of the studies that have been done to date have suffered from aws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conicting results. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. In one study, mice genetically altered to be predisposed to developing one type of cancer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether results obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals that had already been treated with cancer-

causing chemicals, and other studies exposed the animals to the RF virtually continuouslyup to 22 hours per day. For the past ve years in the United States, the mobile phone industry has supported research into the safety of mobile phones. This research has resulted in two ndings in particular that merit additional study:

1 PRELIMIN In a hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve 165 2 Researchers conducted a large battery of laboratory tests to assess RY A sheath). No statistically signicant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of types of gliomas were considered together. It should be noted that the average length of mobile phone exposure in this study was less than three years. When 20 types of glioma were considered separately, however, an association was found between mobile phone use and one rare type of glioma, neuroepithelliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents increase risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is expected to bear on the accuracy and repeatability of these results.1 PRELIMIN the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the test cells to radiation for this long resulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur. The data already in the literature on the response of the micronucleus assay to RF are conicting. Thus, follow-up research is necessary.2 FDA is currently working with government, industry, and academic groups to ensure the proper follow-up to these industry-funded research ndings. Collaboration with the Cellular Telecommunications Industry Association

(CTIA) in particular is expected to lead to FDA providing research 166 2 recommendations and scientic oversight of new CTIA-funded research based on such recommendations. Two other studies of interest have been reported recently in the literature:

1 RY A Two groups of 18 people were exposed to simulated mobile phone signals under laboratory conditions while they performed cognitive function tests. There were no changes in the subjects' ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only change noted among more than 20 variables compared.3 In a study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically signicant.4 PRELIMIN In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones. What is known about cases of human cancer that have been reported in users of hand-held mobile phones?

Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. population at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of 167 RY A mobile phones (a number increasing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to compare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched people without brain cancer. This is called a case-control study. The current case-control study of brain cancers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information. What is FDA's role concerning the safety of mobile phones?

Under the law, FDA does not review the safety of radiation-emitting consumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of mobile phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientic data do not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:

PRELIMIN support needed research into possible biological effects of RF of the design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function type emitted by mobile phones 168 cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health RY A At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level. These agencies are:

National Institute for Occupational Safety and Health Environmental Protection Agency Federal Communications Commission Occupational Health and Safety Administration National Telecommunications and Information Administration PRELIMIN The National Institutes of Health also participates in this group. In the absence of conclusive information about any possible risk, what can concerned individuals do?

If there is a risk from these productsand at this point we do not know that there isit is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a person receives. Those persons who spend long periods of time on their hand-

held mobile phones could consider holding lengthy conversations on conventional phones and reserving the hand-held models for shorter conversations or for situations when other types of phones are not available. People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance between their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:

a mobile phone in which the antenna is located outside the vehicle 169 a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package waist a headset with a remote antenna to a mobile phone carried at the RY A Again, the scientic data do not demonstrate that mobile phones are harmful. But if people are concerned about the radio frequency energy from these products, taking the simple precautions outlined above can reduce any possible risk. Where can I nd additional information?

For additional information, see the following Web sites:

Federal Communications Commission (FCC) RF Safety Program

(select Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters):

http://www.fcc.gov/oet/rfsafety World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://

www.who.int/emf United Kingdom, National Radiological Protection Board:

http://www.nrpb.org.uk Cellular Telecommunications Industry Association (CTIA):

http://www.wow-com.com U.S. Food and Drug Administration (FDA) Center for Devices and Radiological Health:

http://www.fda.gov/cdrh/consumer/

PRELIMIN 170 1. Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Symposium;1999 June 20;

Long Beach, California. 2. Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and personal communication, unpublished results. 3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915-MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999. 4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular telephones and the risk for brain tumors: a case-control study. Int. J. Oncol., 15: 113-116, 1999. RY A ITC00-010 PRELIMIN 171 Motorola Limited Warranty for the United States and Canada Warranty RY A What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, and consumer and professional two-way radios

(excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certied accessories sold for use with these Products (Accessories) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (Software) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:

Products and Accessories Products Covered Products and Accessories as dened above, unless otherwise provided for below. PRELIMIN Length of Coverage One (1) year from the date of purchase by the rst consumer purchaser of the product unless otherwise provided for below. Limited lifetime warranty for the lifetime of ownership by the rst consumer purchaser of the product. Limited lifetime warranty for the lifetime of ownership by the rst consumer purchaser of the product. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap covers and cases. Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection. 172 Products Covered Consumer and Professional Two-Way Radio Accessories. Products and Accessories that are Repaired or Replaced. Length of Coverage Ninety (90) days from the date of purchase by the rst consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. RY A Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or

(d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certied Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modication. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modication in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. PRELIMIN 173 Length of Coverage Ninety (90) days from the date of purchase. RY A Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software Products Covered Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or oppy disk). PRELIMIN Exclusions Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided as is and without warranty. Who is Covered?

This warranty extends only to the rst consumer purchaser, and is not transferable. What Will Motorola Do?

Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent 174 RY A reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service. How to Obtain Warranty Service or Other Information?

USA Phones 1-800-331-6456 Two-Way Radios 1-800-353-2729 Pagers 1-800-548-9954 All Products 1-800-461-4575 1-888-390-6456 Canada TTY For Accessories and Software, please call the telephone number designated above for the product with which they are used. PRELIMIN You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly;

(e) your address and telephone number. What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT 175 RY A

(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted. PRELIMIN ITC02-162 176 Product Registration Online Product Registration:

http://www.motorola.com/warranty Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to conrm warranty status. Thank you for choosing a Motorola product. RY A PRELIMIN Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. 177 Index A accessories optional 10, 37, 89, 116, 135, 138, 141 standard 17 accessory connector port 1 active line indicator 23 Attach Number feature 34, datebook answering a call 22 antenna 21 application, locking 59 appointments. See RY A auto PIN dial 60 automatic location information 65 indicators 25 sending 37, 135 automatic redial turning on/off 60 using 3031 B backlight 60 banner graphic 56 banner text 56 battery car kit charger time 140 charging 1819 extending battery life 27, 2829, 60 installing 1718 level indicator 19, 23, 25 meter 58 dened 25 Add Digits feature 65 alarm 81, 84 alarm clock 8688 alert creating 105110 dened 103 reminders, turning on/off 110 PRELIMIN managing 7980 screen saver 133134 screen saver, setting 80 wallpaper 132133 wallpaper, setting 80 selecting 103104 turning off 27, 32 ALI indicator 23, 25 analog signal indicator dened 24 illustration 23 animation 178 block cursor, dened 42 browse text mode 43 browser alerts 54, 9798 browser. See micro-browser C calculator 122124 calendar. See datebook call adding digits after phone number 65 alert 27 alert, creating 105110 alert, selecting 103104 alert, turning off 32 answer options 58 answering 22 call waiting 36 calling card 72 canceling 32 datebook, opening 37 deleting 6465 dialed calls list 35, 37, PRELIMIN emergency number 32 ending 22 in-call timer 57 making 21 dialing 21 dialing a recent call 6465 6465 car kit call (continued) message center, accessing 37 muting 37 prex digits, inserting 34 received calls list 35, 37, RY A 6465 receiving 22 recent calls 6465 restricting 149150 ring style, setting 103 speakerphone, activating 37 storing 6465 three-way call 36 timing 6668 unanswered call 31 voice dial 35 Call Failed message 30 call timers 6668 call waiting 36 caller ID 31 calling card call 72 calling line identication. See caller ID automatic answer 138 automatic hands-free 139 charger time 140 power-off delay 139 179 clock illustration 23 codes changing 146147 default 21, 146 if you forget a code/password 147 color, display 134 computer synchronizing data 78, datebook (continued) deleting an event 86 event reminders, turning on/off 110 event view 83 reminders 84 synchronizing 143 synchronizing entries 88 week view 81 RY A deleting a call 6465 dialed calls list 35, 37, dialing a number 21 digital signal indicator 6465 dened 24 illustration 23 88 making 141145 D data call contrast, display 61 convertible covers 1920 currency converter 124 cursor 42 customizing the menu 131 display PRELIMIN adding an event 84 alarm 84 alarm clock 8688 calendar 81 changing event information 84 copying an event 85 day view 82 date, setting 59 datebook backlight 60 banner graphic 56 banner text 56 color 134 contrast 61 described 2326 greeting 56 idle display 23 illustration 23 language 61 menu icons, personalizing 132 zoom setting 60 zooming in/out 26 180 drafts folder 54 DTMF tones 37, 61, 65, 156 E earpiece volume, adjusting 27 email address, storing in event alert 103104 exchange rate, calculating ending a call 22 Enter Unlock Code message phonebook 7072 email, sending 75, 98101 emergency number 32 end key 1 functions 22 menu functions 38 147, 149 PRELIMIN 6162 124 88 F factory settings, resetting external device synchronizing data 78, ashing cursor, dened 42 external display 27 ip 52, 8991 4-way navigation key 1, 28, external display and 27 open to answer call 58 turning the phone on 21 FM Stereo Radio Headset RY A G games 125??

Get It Now applications 125??

38 get it now icon 23 greeting, display 56 H hands-free mode automatic answer 138 automatic call routing 139 charger time 140 dened 138 power-off delay 139 speakerphone, activating 37 headset automatic answer 138 FM Stereo Radio Headset 52, 8991 181 headset jack 1 home keys, personalizing indicators (continued) vibrate and ring style 25, 132 103 I idle display, dened 23 in use indicator 23 dened 24 inbox, text message 94 in-call timer 57 incoming call vibrate style 25, 103 voice message waiting voice name 69 iTAP software 4851 93 RY A J joystick 1, 38 24 Incoming Call message 31 indicators K key canceling 32 active line 23, 25 ALI 23, 25 battery level 19, 23, 25 digital/analog signal 23, in use 23, 24 loud ring style 25, 103 menu 23, 26 message waiting 23, 25, PRELIMIN missed call 31 ring style 23, 25, 103 roam 23, 24 signal strength 23, 24 silent alert 25 silent ring style 25, 103 soft ring style 25, 103 text entry mode 25 keypad 95, 98 end 1, 22, 38 4-way navigation 1, 28, 38 left soft key 1, 23, 38, 132 lock 59, 149 menu 1, 10, 26, 38 power 1, 21 right soft key 1, 23, 38, 132 send 1, 22, 64 voice 1, 74, 114 volume control 1, 27 answering calls 58 locking and unlocking 59, 149 volume, setting 105 182 L language, setting 61 left soft key functions 1, 23, 38 personalizing 132 location, sending to network 37, 135 lock applications 59 keypad 59, 149 phone 148149 voice notes 118 103 Low Battery message 25 lock application feature 59 loud ring style indicator 25, M making a call 21 master clear 62 master reset 61 Memory is Full! message PRELIMIN Browser Menu 121 Datebook Menu 81, 82, 83 Dialing Menu 34, 66 entering text 4142, features 5263 4351 menu 95 menu (continued) icons, changing in idle display 132 131 icons, converting to text RY A icons, described 23 language, setting 61 Last Calls Menu 65 lists 40 locking applications 59 My Tones Menu 108, 110 navigating 10, 38 personalizing 131 Quick Note Menu 101102 rearranging features 131 scroll feature 61 Text Msg Menu 9697 using features 10, 4042 view, changing 131 Voice Notes Menu 115, 117 menu indicator 23 dened 26 menu key 1, 10, 26, 38 message browser alert 54 browser alerts 9798 deleting, text 9597 dialing number from 34 drafts folder 54 183 N network settings 62 notepad viewing your number 4 number, viewing your own number dened 66 entering digits 66 retrieving digits 66 RY A 58 numeric text mode 43 O one-touch dial dened 33 using 33 voicemail number 33 optional accessory, dened optional feature, dened 10 outbox 54, 102 P passwords. See codes pause character 34, 35, 73 phone active line indicator 25 alert, turning off 27, 32 answer options 58 message (continued) inbox setup, text message 94 locking, text 9597 outbox 54, 102 quick note 101102 reading, text 9597 receiving, text 95 reminders, receiving 93, 95 reminders, turning on/off 110 message waiting indicator 23, 98 dened 25 displayed 95 sending 35, 98101 status 102 text 94102 voicemail 9293 PRELIMIN microphone 1 missed call indicator 31 Missed Call message 31 missed call, dialing 35 muting a call 37 my telephone number 4, browser alerts 54, 9798 using 120121 messages icon 23 micro-browser 22, 37, 58 10 my tones 105110 184 phone (continued) automatic location phone number (continued) long numbers, storing information 37, 135 codes 146147 erase user-entered information 62 feature specications 37, 58 35 storing in phonebook 7677 redialing 30 seeing your own 22, 37 sending text message to RY A viewing your number 4 viewing your own 58 voice dial 35 attaching two numbers 7072 phonebook ip 21 information 37 keypad, locking and unlocking 59, 149 location 37, 135 locking 148149 reset all options 61 security code 146 specications 37, 58 turning on/off 21 unlock code 21, 146, 147 unlocking 21, 148149 voice dial 35 phone number PRELIMIN adding digits after 65 attaching to prex digits active line indicator 25 active phone line, attaching two numbers changing 58 34 65 65 deleting an entry 77 dialing a number 75 editing an entry 77 entry details 69 long numbers 7677 number type indicator 69 one-touch dial 33 prex digits, inserting 34 ringer ID, activating/deactivat ing 104 ringer ID, dened 71, 104 ringer ID, setting 71 sending an email 75 sorting entries 78 speed dial number 69, 71 185 redial automatic redial 3031 busy number 30 reminders datebook 84 dened 110 text message 95 turning on/off 110 voicemail message 93 restricting calls 149150 right soft key RY A functions 1, 23, 38 personalizing 132 selecting 103104 turning off 27, 32 customizing 103105 dened 103 indicators 25, 103 setting 103 ring style indicator 23 dened 25, 103 phonebook (continued) speed dial number, dened 33 speed dial, using 33 storing an entry 7072 synchronizing 143 synchronizing entries 78 voice name entry 74 picture managing 7980 screen saver 133134 screen saver, setting 80 wallpaper 132133 wallpaper, setting 80 PIN code dialing automatically 60 storing with phonebook power key 1, 21 predictive text entry 4851 ring style ring alert entry 72 PRELIMIN ringer ringer ID 6465 R radio 8991 received calls list 35, 37, recent calls 6465 Q quick note 101102 dened 94 volume, adjusting 27 volume, setting 105 activating/deactivating 104 dened 71, 104 186 ringer ID (continued) listed in phonebook entry 69 setting for phonebook entry 71 roam indicator 23 dened 24 S screen saver 133134 setting 80 shortcuts scroll feature 61 security code send key 1, 22, 64 short message service. See changing 146147 creating 111112 standard 4, 111 using 113 text message PRELIMIN 103 text functions 23, 38 illustration 1 dened 24 silent alert indicator 25 silent ring style indicator 25, shortcuts icon 23 signal strength indicator 23 SMS. See text message soft keys soft keys (continued) labels 23 personalizing 132 soft ring style indicator 25, speakerphone, activating 37 speed dial 103 RY A changing number 71 number, dened 33 sorting phonebook entries by 78 using 33 standby time dened 27 increasing 29 status light 1, 2627, 60 storing a call 6465 symbol text mode 4648 symbols, entering 4648 synchronizing data 78, 88 T tap method text entry 4446 telephone number viewing your number 4 telephone number, viewing your own 58 block cursor 42 browse mode 43 187 text (continued) character chart 46 entering from keypad 4351 entry mode, changing 43 ashing cursor 42 iTAP software predictive text entry 4851 numeric mode 43 symbol chart 47 symbol mode 4648 tap method 4446 text entry mode indicator 25 text message dened 94 deleting 9597 dialing number from 34 drafts folder 54 inbox setup 94 locking 9597 outbox 54 quick note 101102 reading 9597 receiving 95 reminders 95 sending 35, 98101 status 102 PRELIMIN text mode, changing 43 three-way call 36 time, setting 59 timers 6668 travel charger, using 19 voice key voice dial TrueSync 78, 88, 143 TTY device 37, 135137 U unlock keypad 59, 149 phone 148149 RY A unlock code 147 bypassing 147 changing 146147 entering 21, 148, 149 V vibrate alert selecting 103104 turning off 27, 32 vibrate and ring style indicator 25, 103 vibrate ring style setting 103 vibrate style indicator 25, 103 dialing a number 35, 75 recording voice name 74 dialing a number 35 illustration 1 recording a voice name recording a voice note 74 114 188 Z zoom setting 60 zooming in/out 26 RY A voice message waiting indicator 93 voice name dened 74 recording 74 voice name indicator 69 voice notes 114119 voice shortcut creating 111112 dened 111 using 113 voicemail reminders, turning on/off dialing with one-touch dial using 9293 volume earpiece 27 keypad 105 ringer 27, 105 volume keys 1, 27 33 110 PRELIMIN W wait character 34, 73 wallpaper 132133 warranty 172176 Web browser icon 23 Web pages 120121 setting 80 U.S. patent Re. 34,976 189 RY A PRELIMIN 190

Wireless Phone Safety Tips RY A Safety is your most important call!

Your Motorola wireless telephone gives you the powerful ability to communicate by voice almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies the benets of wireless phones, one that every user When driving a car, driving is your rst responsibility. If you nd it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the must uphold. PRELIMIN following tips:

1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 191

2 When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original hands-

free accessories available today. 3 Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4 Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy trafc or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy trafc can be hazardous. RY A 5 If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a to do list or going through your address book takes attention away from your primary responsibilitydriving safely. PRELIMIN 6 Dial sensibly and assess the trafc; if possible, place calls when you are not moving or before pulling into trafc. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7 Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road. 192

8 Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of re, trafc accident or medical emergencies.*

9 Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.*

10 Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken trafc signal, a minor trafc accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.*

RY A PRELIMIN

* Wherever wireless phone service is available. 193 Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The

use of these devices may be prohibited or restricted in certain areas. RY A PRELIMIN For more information, please call 1-888-901-SAFE or visit the CTIA Web site at www.wow-com.com ITC00-011 194 motorola.com 8988485L49-O