all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Exhibit 8 Users Manual | Users Manual | 1.53 MiB | ||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report |
1 2 3 | Exhibit 8 Users Manual | Users Manual | 1.53 MiB |
APPLICANT: MOTOROLA, INC. FCC ID: IHDT6HM1 USERS MANUAL A preliminary draft copy of the Users Manual follows this cover page. The text on the following three pages will be added for FCC requirements. EXHIBIT 8 encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Notice To Users FCC NoticeMotorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). If your mobile device or accessory has a USB connector, or is otherwise considered a computer peripheral device whereby it can be connected to a computer for purposes of transferring data, then it is considered a Class B device and the following statement applies:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is FCC Notice Specific Absorption Rate Data SAR Data This model wireless phone meets the governments requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR SAR Data level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 0.39 W/kg, and when worn on the body, as described in this user guide, is 0.31 W/kg.
(Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association
(CTIA) Web site:
http://www.phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site:
http://www.cwta.ca 1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. 2. SAR Data Cover.Print.Front.E6.UG.fm Page 1 Thursday, August 24, 2006 9:18 AM MOTOROKR E6 GSM English motorola.com Cover.Print.Front.E6.UG.fm Page 2 Thursday, August 24, 2006 9:18 AM HELLOMOTO Introducing your new MOTOROKR E6 GSM wireless phone. Heres a quick anatomy lesson. Earpiece Side Up/Down Keys Memory Card Slot Send Key Make & answer calls. Browser Key Microphone Make sure your fingers dont cover the microphone during calls. Headset Jack Camera Key Phone Lock Switch Lock touchscreen & phone keys. Power/End Key Turn on/off, hang up calls, open application launcher in home screen. Media Player Key Launch media player, or move it to foreground
(when running in background). Navigation Key Navigate menus. Center Key Select menu items. Mini-USB Port 1 Side Up/Down Keys Adjust volume, navigate menus. Memory Card Slot Insert SD memory card, store and retrieve multimedia content (music files, video clips, photos). Media Player Keys When the RealOne media player is active: Press i to pause or play a file or playlist. Press h or j to play the previous or next file in a playlist. Press and hold h or j to rewind or fast forward. When the FM radio is active: Press i to mute/unmute the radio. Press h or j to select the previous or next channel. 2 Camera Key Activate camera and take photos. Phone Lock Switch Lock phone to prevent unwanted keypresses or touchscreen activation. Slide down to lock, slide up to unlock. Mini-USB Port Insert battery charger or phone accessories. Camera Key Activate camera and take photos. Camera Mode Switch Slide up to set normal picture mode, slide down to set macro mode (for close-up shots of business cards or small objects). Stylus Use with touchscreen display. Speaker Listen to audio playback of music & video clips. 2.0 mega pixels Camera Lens Mirror Aim camera lens for self-portraits. 3 Caution: Changes or modifications made in the radio phone, not expressly approved by Motorola, will void the users authority to operate the equipment. Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third-party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third-party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Manual Number: 68XXXXX140-O Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Certain mobile phone features are dependent on the capabilities and settings of your service providers network. Additionally, certain features may not be activated by your service provider, and/or the providers network settings may limit the features functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this users guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Motorola, Inc., 2006. 4 contents Safety Information . 8 Use and Care . 13 EU Conformance . 14 Recycling Information . 15 essentials . 16 about this guide . 16 SIM card. 16 battery . 19 memory card . 22 turn it on & off . 23 make a call . 24 answer a call. 24 your phone number . 25 basics. 26 display . 26 global navigation bar. 27 application launcher . 28 button bar . 29 status bar . 29 text entry . 31 tap & hold. 33 volume . 34 navigation key. 34 speakerphone. 35 codes & passwords . 35 lock & unlock phone . 36 lock touchscreen
& phone keys . 36 share information . 37 customize . 39 profiles . 39 wallpaper . 40 color scheme . 40 backlight . 41 calls . 42 recent calls . 42 redial. 43 hold or mute a call . 44 call waiting . 44 caller ID . 44 cancel incoming call . 45 emergency calls . 45 international calls . 46 turbo dial. 46 dial extension or voicemail number . 47 dial extension number during a call . 47 contents 5 unsent messages . 64 tips for sending messages . 64 receive message . 64 read and reply . 66 store message object . 66 sort messages. 66 drafts . 66 deleted messages. 67 messages on SIM card. 67 create folder . 67 move messages . 68 set up message service. 69 browser messages . 72 information service messages . 72 office applications . 74 email . 74 calendar . 81 tasks . 85 notes . 86 viewer . 87 calculator . 87 alarm clock. 88 file manager. 89 business card reader . 93 media applications . 96 browser . 96 RealOne media player . 101 camera. 103 voice recorder . 108 video camera . 109 photo editor . 110 FM radio . 112 address book . 48 view contact list . 48 add new contact . 49 create group . 50 call or send message. 50 search . 51 sort . 52 delete contact . 52 storage location. 52 copy contacts . 53 categories . 53 check capacity . 55 share contact. 56 synchronize contacts. 56 owners information. 57 messages . 58 message center. 58 signature . 59 send text message . 60 send multimedia message . 61 6 contents extra applications. 114 talking phone . 114 Bluetooth wireless . 114 synchronize phone information . 118 modem. 119 stk. 120 world time . 121 other features . 122 advanced calling . 122 setup . 123 call times & costs. 126 handsfree . 127 security. 128 service and repairs . 130 SAR Data. 131 WHO Information . 132 GNU License. 133 index . 134 contents 7 Safety and General Information Safety Information This section contains important information on the safe and efficient operation of your mobile device. Read this information before using your mobile device.*
Exposure to Radio Frequency (RF) Energy Your mobile device contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your mobile device, the system handling your call controls the power level at which your mobile device transmits. Your Motorola mobile device is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
8 The information provided in this document supersedes the general safety information in users guides published prior to May 1, 2006. Safety Information Operational Precautions For optimal mobile device performance and to be sure that human exposure to RF energy does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions. External Antenna Care If your mobile device has an external antenna, use only a Motorola-supplied or approved replacement antenna. Use of unauthorized antennas, modifications, or attachments could damage the mobile device and/or may result in your device not complying with local regulatory requirements in your country. DO NOT hold the external antenna when the mobile device is IN USE. Holding the external antenna affects call quality and may cause the mobile device to operate at a higher power level than needed. Product Operation When placing or receiving a phone call, hold your mobile device just like you would a landline phone. If you wear the mobile device on your body, always place the mobile device in a Motorola-supplied or approved clip, holder, holster, case, or body harness. If you do not use a body-worn accessory supplied or approved by Motorola, keep the mobile device and its antenna at least 2.5 centimeters (1 inch) from your body when transmitting. When using any data feature of the mobile device, with or without an accessory cable, position the mobile device and its antenna at least 2.5 centimeters (1 inch) from your body. Using accessories not supplied or approved by Motorola may cause your mobile device to exceed RF energy exposure guidelines. For a list of Motorola-supplied or approved accessories, visit our Web site at: www.motorola.com. RF Energy Interference/Compatibility Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices. Follow Instructions to Avoid Interference Problems Turn off your mobile device in any location where posted notices instruct you to do so. These locations include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy. In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight. Pacemakers If you have a pacemaker, consult your physician before using this device. Persons with pacemakers should observe the following precautions:
ALWAYS keep the mobile device more than 20 centimeters (8 inches) from your pacemaker when the mobile device is turned ON.
DO NOT carry the mobile device in the breast pocket.
Use the ear opposite the pacemaker to minimize the
potential for interference. Turn OFF the mobile device immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some mobile devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives. Safety Information 9 Other Medical Devices If you use any other personal medical device, consult your physician or the manufacturer of your device to determine if it is adequately shielded from RF energy. Driving Precautions Check the laws and regulations on the use of mobile devices in the area where you drive. Always obey them. When using your mobile device while driving, please:
Give full attention to driving and to the road. Using a mobile device may be distracting. Discontinue a call if you cant concentrate on driving.
Use handsfree operation, if available.
Pull off the road and park before making or answering a call if driving conditions so require. Responsible driving practices can be found in the Smart Practices While Driving section at the end of this guide and/or at the Motorola Web site: www.motorola.com/callsmart. Operational Warnings Obey all posted signs when using mobile devices in public areas, such as health care facilities or blasting areas. Automobile Air Bags Do not place a mobile device in the air bag deployment area. Potentially Explosive Atmospheres Areas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust, or metal powders. When you are in such an area, turn off your mobile device, and do not remove, install, or charge batteries. In such areas, sparks can occur and cause an explosion or fire. Damaged Products If your mobile device or battery has been submerged in water, punctured, or subjected to a severe fall, do not use it until you take it to a Motorola Authorized Service Center. Do not attempt to dry it with an external heat source, such as a microwave oven. 10 Safety Information Batteries and Chargers If jewelry, keys, beaded chains, or other conductive materials touch exposed battery terminals, this could complete an electrical circuit (short circuit), become very hot, and could cause damage or injury. Be careful when handling a charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola Original batteries and chargers. Caution: To avoid risk of personal injury, do not dispose of your battery in a fire. Your battery, charger, or mobile device may contain symbols, defined as follows:
Symbol 032374o Definition Important safety information follows. 032376o 032375o Do not dispose of your battery or mobile device in a fire. Your battery or mobile device may require recycling in accordance with local laws. Contact your local regulatory authorities for more information. Symbol Li Ion BATT 032378o Definition Do not throw your battery or mobile device in the trash. Your mobile device contains an internal lithium ion battery. Do not let your battery, charger, or mobile device get wet. Listening at full volume to music or voice through a headset may damage your hearing. Choking Hazards Your mobile device or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your mobile device and its accessories away from small children. Glass Parts Some parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center. Safety Information 11 Repetitive Motion When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician. Seizures/Blackouts Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your mobile device. Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Caution About High Volume Usage Listening at full volume to music or voice through a headset may damage your hearing. 12 Safety Information Use and Care Use and Care To care for your Motorola phone, please keep it away from:
liquids of any kind Dont expose your phone to water, rain, extreme humidity, sweat, or other moisture. dust and dirt Dont expose your phone to dust, dirt, sand, food, or other inappropriate materials. extreme heat or cold Avoid temperatures below -10C/14F or above 45C/113F. cleaning solutions To clean your phone, use only a dry soft cloth. Dont use alcohol or other cleaning solutions. microwaves Dont try to dry your phone in a microwave oven. the ground Dont drop your phone. Use and Care 13 European Union Directives Conformance Statement EU Conformance Hereby, Motorola declares that this product is in compliance with:
product Approval Number from your products label in the Search bar on the Web site.
The essential requirements and other relevant provisions of Directive 1999/5/EC
All other relevant EU Directives 0168 Product Approval Number The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the 14 EU Conformance Recycling InformationCaring for the Environment by Recycling This symbol on a Motorola product means the product should not be disposed of with household waste. Disposal of your Mobile Telephone and Accessories Please do not dispose of mobile telephones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems have been set up to handle waste electrical and electronic items. Please contact your regional authorities for more details. If no suitable scheme exists, you may return unwanted mobile telephones and electrical accessories to any Motorola Approved Service Centre in your region. Recycling Information 15 SIM card Your Subscriber Identity Module (SIM) card contains personal information like your phone number and contacts list. Caution: Dont bend or scratch your SIM card. Keep it away from static electricity, water, and dirt. essentials about this guide This guide describes the basic features of your Motorola wireless phone. symbols This means a feature is network, SIM card, or subscription dependent and may not be available in all areas. Contact your service provider for more information. This means a feature requires an optional accessory. 16 essentials 1 Pull the stylus halfway out of the phone. 2 Press down the release latch, then slide the battery door away from the camera lens and remove it from the phone. Caution: The battery door on your phone has sharp corner edges around the stylus. Be careful when removing or attaching the battery door. essentials 17 3 Gently slide the SIM card latch down. 5 Slide the SIM card latch up to lock the SIM card in place. 4 Hold the SIM card with the gold plate facing down. Slide the SIM card under the metal tabs and into the card slot. 18 essentials battery battery installation 1 Pull the stylus halfway out of the phone. 2 Press down the release latch, then slide the battery door away from the camera lens and remove it from the phone. Caution: The battery door on your phone has sharp corner edges around the stylus. Be careful when removing or attaching the battery door. essentials 19 3 Insert the battery under the tabs on the left side of the battery compartment and push down. 4 Pull the stylus halfway out of the phone, then place the battery door on the phone and slide it up to lock shut. 20 essentials battery charging New batteries are not fully charged. Insert the battery charger plug into the mini-USB port at the base of your phone as shown, and plug the other end into an electrical outlet. Your phone might take several seconds to start charging the battery, and might require several hours to charge fully. The display shows Charge Complete when finished. Tip: Relax, you cant overcharge your battery. It will perform best after you fully charge and discharge it a few times. Note: You can charge the battery when the phone is off or the battery is completely discharged. Note: You can charge your battery by connecting a cable from your phones mini-USB port to a USB port on a computer. Both your phone and the computer must be turned on, and your computer must have the correct software drivers installed. Cables and software drivers are available in Motorola Original data kits, sold separately. battery tips Battery life depends on the network, signal strength, temperature, features, and accessories you use. Always use Motorola Original batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers.
New batteries or batteries stored for a long time may take more time to charge.
When charging your battery, keep it near room temperature.
When storing your battery, keep it uncharged in a cool, dark, dry place.
Never expose batteries to temperatures below -10C (14F) or above 45C (113F). Always take your phone with you when you leave your vehicle. It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery.
essentials 21 Contact your local recycling center for proper battery disposal. Warning: Never dispose of batteries in a fire because they may explode. Before using your phone, read the battery safety information in the Safety and General Information section included in this guide. memory card You can use an optional removable SD memory card or MMC memory card with your phone to store and retrieve multimedia content (such as music files, video clips, and photos). Caution: Dont bend or scratch your memory card. Keep it away from static electricity, water, and dirt. Open the protective cover on your phones memory card slot, then insert the memory card into the memory card slot on the side of your phone until it clicks into place. To remove the memory card:
1 Tap the status bar at the top of the display to open the device status screen. 2 Tap the scroll bar to scroll down to the Memory Card option, then tap the Eject button. 3 Wait for your phone to indicate that its safe to remove the memory card, then tap OK. 22 essentials If you dont insert a SIM card, your phone shows No SIM Card. You can select Antenna On (to make an emergency call) or Antenna Off (to use the phones non-calling features). You can turn off the phones antenna in locations where wireless phone use is prohibited, or when you just want to use the phones non-calling features (games, personal organizer, multimedia player). Tap the status bar at the top of the display to open the device status screen, then tap the Antenna drop-down menu to select On or Off. To turn off your phone, press and hold O for two seconds. 4 Push the card in until it clicks. It begins to slide out, and you can slide it the rest of the way out. turn it on & off Caution: On power up, the phone may prompt you to enter your SIM card PIN code to unlock the SIM card. If you enter an incorrect PIN code three times before the correct code, your SIM card is disabled and your display shows SIM Blocked. Contact your service provider. To turn on your phone, press and hold the power key O until the display lights up. If prompted, enter your eight-digit SIM card PIN code and/or four-digit unlock code. essentials 23 make a call 1 Tap 9 in the top global navigation bar to open the phone keypad. 2 Tap the keypad keys to dial the phone number. 3 Tap Call or press the send key N to make the call. 10:03 CallCall 4 When you are finished, tap End or press the end key O to end the call. Tip: Tap P to select a number from a list of recent received or dialed calls. Tip: If you need to use the phone keypad during a call (for example, to dial an extension or make a conference call), tap the keypad 24 essentials button from the in-call screen. Tap the phone button l to return to the in-call screen. 10:03 No Meetings Incoming Call... answer a call When you receive a call, your phone rings and/or vibrates and shows an incoming call message. Tip: You can press the volume keys to mute the ringer before answering the call. Tap Answer or press the send key Nto answer the call. When you are finished, tap End or press the end key O to end the call.
+1234567890 10/16/2008 Answer Ignore Busy 1 Tap 9 in the top global navigation bar to open the phone keypad. 2 Tap , then tap Setup to open the phone setup menu. 3 Tap My Number to open the number editor. 4 Enter your name and number (for line 1 and line 2, if applicable), then tap Done to store the information. If you dont know your phone number, contact your service provider. Tip: If you prefer not to answer the call, you can tap Ignore to hang up on the caller, or tap Busy to transmit a busy tone signal to the caller
(tapping Busy may divert the incoming call to your voicemail inbox). your phone number To view your phone number:
1 Tap 9 in the top global navigation bar to open the phone keypad. 2 Tap in the bottom button bar to open the phone menu. 3 Tap My Number to see your phone number. To see your phone number while youre on a call, tap and then tap My Number. To store or edit your name and phone number on your SIM card:
essentials 25 basics See pages 1-3 for basic phone diagrams. Tip: Want some help? Tap 6 at the top of the screen, then tap the Help icon to find information about phone features. display The home screen appears when you turn on your phone. Status Bar Tap J to open the calendar. Tap E to set a ring alert profile. 10:03 Global Navigation Bar (GNB) No Meetings 10/16/2008 Application Icons 26 basics The home screen shows the next scheduled calendar event for the day. Icons at the bottom of the screen provide shortcuts to commonly used applications. To use your phones features, tap on the global navigation bar icons, application icons, buttons, and text with the provided stylus. To change the options that you see in the home screen, tap 6 to open the application launcher, tap T Setup, then tap Home Screen Setup. Tip: Tap an unused area of the home screen to see an unobstructed fullscreen view of the background wallpaper image. Tap the fullscreen wallpaper image to return to the home screen display. global navigation bar Icons in the top global navigation bar give you easy access to your phones primary functions:
Address Book 6 Application Launcher 5 7 Messages 9 Phone Your phone also shows a new message icon 8 in the global navigation bar to notify you of a new message or a missed call. Tap 8 to see information about the message or missed call. basics 27 application launcher Tap the application launcher icon 6 in the global navigation bar to open the application launcher. Application Launcher Icon
(Selected) 10:03 Status Bar of the screen to see additional icons. Tap an icon to select it. Tip: To show applications in an text-based list, tap , then tap List View. From list view, tap , then tap Thumbnail View to reset the graphic icons. You can select the following icons on the application launcher screens:
Calls Email Calendar office applications Applications Tasks Notes Calculate Scroll Bar Alarm File Ma... Browser All Button Bar Tap the button in the bottom center of the screen to see All application icons, or to see application icons in predefined categories. If necessary, tap the scroll bar on the right side 28 basics E Recent Calls J Calendar U Notes Z Alarm Clock Viewer I Email L Tasks Q Calculator 2 File Manager 0 Business Card Reader multimedia applications
/ Browser
Recorder 3 Photo Editor 1 FM Radio F Camera K Video Camera G Media Player extra applications T Setup 0 8 Bluetooth STK
, Modem R 9 World Time Sync games Your phone may contain Java games or applications that add features and functionality to your phone. Instructions are included with each game. You select Java games from the application launcher screen. button bar The button bar shows functions you can select in the active application. Standard buttons include:
Menu Return Exit Tap to open context sensitive menu. Tap to return to previous screen. Tap to exit current application. status bar Tip: Tap the status bar to see additional phone status information. basics 29 The following indicators can appear in the status bar:
wireless connection with a headset accessory or other external device. 4 memory card Shows when a memory card is inserted in your phone. 5 RealOne Shows when the RealOne media player is playing media content. 6 TTY Shows when your phone is set up for use with an optional TTY device. 7 battery level Vertical bars show the battery charge level. Recharge the battery when your phone shows Low Battery. 8 clock Shows the current time. 10:03 1 2 3 4 5 6 7 8 1 signal strength Vertical bars show the strength of the network connection. You cant make or receive calls when the no signal indicator = or no transmission indicator ~ shows. 2 GPRS Shows when your phone is using a high-speed General Packet Radio Service (GPRS) network connection. 3 Bluetooth Shows that Bluetooth power is turned on. When Bluetooth power is on, your phone can make a 30 basics text entry Multiple text entry methods make it easy for you to enter names, numbers, and messages. The method you select remains active until you change it. Tap a text entry area on the screen to open a text entry window. If necessary, tap the entry method drop-down menu at the bottom of the screen to select a text entry method. Tap in the lower right corner of the screen to hide the text entry keyboard or pad when youre finished, or when you want to use the button bar functions. handwriting You can use the stylus as a pen to write letters, numbers, and punctuation directly on the screen. In a text entry window, tap the entry method drop-down menu and tap Handwriting to open the handwriting pad. Tap a button on the handwriting pad to select Chinese characters, English text, or numbers. Use the stylus to write in either of the two writing spaces. For best performance, alternate between writing spaces so that the character in one space can be recognized while you write in the other. You can write a symbol (instead of text) in the symbol box in the lower right corner of the writing area. Write a character, then wait for your phone to recognize and place it in the text entry window. If the phone places an incorrect character, tap the character in the choice area that you want to replace it. basics 31 Your phone can predict the word you are writing. Tap a word in the prediction area to place it in the text entry window. To activate predictive text entry, see page 33. To enter special characters or edit text, use the function buttons described on page 33. Pinyin keyboard In a text entry window, tap the entry method drop-down menu and tap Pinyin Board to enter Chinese characters with the Pinyin keyboard. Tap keyboard characters to spell the pinyin. Your letters appear in the pinyin area, and corresponding Chinese characters appear in the choice area. To see additional characters, tap the previous button or next button . Tap the desired character to place it at the cursor location in the entry window. 32 basics Your phone predicts the pinyin you are spelling, and highlights the next letters you can type to finish the word. Zhuyin keyboard In a text entry window, tap the entry method drop-down menu and tap Zhuyin Board to enter words using Zhuyin characters. English keyboard In a text entry window, tap the entry method drop-down menu and tap English Keyboard to enter letters and numbers at the cursor location. numeric pad In a text entry window, tap the entry method drop-down menu and tap Numeric Pad to enter digits or numeric symbols at the cursor location. function buttons Tap t with any text entry method to open the symbol pad, to enter a symbol at the cursor location. Tap r to lock or unlock the symbol pad. Tap other buttons to perform the following functions:
w Delete character to left of cursor. v Move cursor to next line. u Enter space at cursor location. Tip: Tap a location in the text entry window to move the cursor to that location. adjust text input settings You can set your preferred input method, primary and secondary language preferences, specify your writing hand (left or right) and handwriting speed, activate word prediction and word completion, activate a user dictionary, and apply a watermark to the text you enter. Tap T Setup in the application launcher screen, then tap Input Setup to open the input setting screen. Adjust settings, then tap Save to save your settings and return to the setup screen. tap & hold When using phone applications, in many cases you can tap and hold on an icon, file, or basics 33 field to open a pop-up menu to perform various operations on the selected item. If the specific task you want to perform in an application is not already listed in the display, try using tap and hold to see if the feature you want is available in a pop-up menu. volume Press the side up/down keys to:
turn off a call alert (the ringer that announces an incoming call
change the earpiece or speakerphone volume during a call
change the speaker volume when playing a song or video clip, or when listening to the FM radio Tap : in the home screen to set the ring alert profile. For more information, see page 39. navigation key Press the navigation key S up, down, left, or right to scroll and highlight menu items. When you highlight something, press the center key s to select it. This guide describes how to use the stylus and touchscreen to use your phones features. In most cases, it doesnt include the equivalent navigation key control for using the feature. 34 basics speakerphone When you activate your phones handsfree speakerphone, you can talk to the other party without holding the phone to your ear. During a call, tap Spkr to turn the handsfree speakerphone on or off. The handsfree speakerphone remains on until you tap Spkr again or turn the phone off. The handsfree speakerphone is disabled when you connect your phone to a handsfree car kit or headset accessory. codes & passwords Your phones four-digit unlock code is originally set to 1234. The six-digit security code is originally set to 000000. If your service provider didnt change these codes, you should change them. You can also change your SIM PIN or call barring passwords. To change a code or password, tap T Setup in the application launcher screen, tap Security, then tap Change Passwords to open the change passwords screen. If you forget your unlock code: At the Enter Unlock Code prompt, try entering 1234 or the last four digits of your phone number. If that doesnt work, tap to open the unlock code bypass screen. Enter your security code, then tap OK to submit the security code. If you forget other codes: If you forget your security code, SIM PIN code, PIN2 code, or call barring password, contact your service provider. basics 35 lock & unlock phone You can lock your phone to keep others from using it. To lock or unlock your phone, you need the four-digit unlock code. To automatically lock your phone after a specified period of inactivity: Tap T Setup in the application launcher screen, tap Security, then select a Phone Lock timer setting. Your phone prompts you to enter the unlock code. Enter your unlock code to activate phone lock. To automatically lock your phone whenever you turn it on: Tap T Setup in the application launcher screen, tap Security, then set Phone Lock to Power On. To unlock your phone: When you see the Enter Unlock Code prompt, enter your unlock code to unlock the phone. Tip: Your phones unlock code is originally set to 1234. Many service providers reset the 36 basics unlock code to the last four digits of your phone number. Note: You can make emergency calls on a locked phone (for more information, see page 45). You also can receive and answer incoming calls when the phone is locked. lock touchscreen &
phone keys You can lock the touchscreen and phone keys keys to prevent accidental keypresses (for example, when carrying your phone in a purse or pocket). Slide the phone lock switch down (see illustration on page 2) to lock the touchscreen and keys. Slide the phone lock switch up to unlock the touchscreen and keys. share information You can share information with another phone, PC, or hand-held device. You can share address book contacts, calendar events, tasks, note pad entries, voice records, pictures, photos, and sound files by sending or receiving the data through a Bluetooth wireless connection, or in an MMS or email message. Tip: In some cases, the share option is only available from the tap and hold pop-up menu. send data 1 Locate the data you want to share (such as contact details, or a list of files in the file manager), tap , then tap Share to select one or more items to share. or Tap and hold an item to open a pop-up menu, then tap Share to see a list of share options. 2 Tap Bluetooth, then tap OK to exchange the data through a Bluetooth wireless connection. or Tap MMS or Email, then tap OK to send the data in an MMS or email message. 3 Complete the setup procedure for the transfer method you selected. 4 Tap OK to send the data. basics 37 For more information about using a Bluetooth wireless connection, see page 114. receive data The sending device must establish a transmission link with your phone through a Bluetooth, MMS, or email connection. If necessary, turn on Bluetooth power on your phone to let the other device establish a wireless link (to turn Bluetooth power on, see page 115. Your phone alerts you when it receives a data transfer request from the other device. If necessary, tap OK to accept the data. Your phone notifies you when data transfer is complete. If the transfer is not successful, your phone shows the message Failed to Receive. 38 basics customize profiles You can quickly change your phones ring alert profile to match your activity, environment, or personal requirements. Each profile uses a different set of ringtones or vibrations for incoming calls and other events. The Silent profile silences your phone until you set another profile. Here are the profiles you can choose:
E Ring Loud D Vibe Then Ring Loud C Vibe Then Ring Soft A Vibrate D Vibe And Ring Loud
@ Ring Soft B Silent The current profile icon shows in the lower-left corner of the home screen. set the ring alert profile Tap : in the home screen to set the ring alert profile. change profile settings You can change the ringtones that a profile uses to notify you of incoming calls and other events. Note: You cant set a ringtone for the Silent profile, or change some settings for some profiles. 1 Tap T Setup in the application launcher screen, then tap Ringer Alert Style. customize 39 2 Tap a profile, then tap Edit to adjust ringtone settings to personalize the profile. You can change the ringtones used to notify you of incoming calls and messages, set ringer IDs, and adjust alert volume, touchscreen volume, and keypad volume. Any changes you make are saved to the profile. fullscreen image preview to return to the wallpaper menu. 3 Tap OK to save your setting. Tip: Tap an unused area of the homescreen to see an unobstructed fullscreen view of the wallpaper image. Tap the fullscreen wallpaper image to return to the home screen. wallpaper Set a photo or picture as a wallpaper
(background) image in your phones display. The wallpaper image appears as a faint watermark in text and menu displays. 1 Tap T Setup in the application launcher screen, then tap Wallpaper. 2 Tap a photo/picture thumbnail image to set it as the wallpaper image. Tap the color scheme Set the colors that your phone uses for buttons, highlights, and the status bar. Note: This feature changes the look and feel of the phones user interface, including the icons that you see in the top global navigation bar. 1 Tap T Setup in the application launcher screen, then tap Color Scheme. 40 customize Note: Your phones display normally is visible only when the display backlight is on, or when the display is viewed in direct sunlight. To extend battery life, the backlight turns off automatically when no activity is detected for a period of time. The backlight turns back on when you tap the screen or press any key. 2 Tap a thumbnail image to select it as the color scheme. Your phone shows a brief preview of the selected color scheme. 3 Tap OK to save your setting. backlight 1 Tap T Setup in the application launcher screen, then tap Backlight Setup. 2 Tap and to decrease or increase backlight brightness. 3 Tap Backlight Sleep Time to set the amount of time that the backlight remains on. 4 Tap Save to save your settings. Tip: Press and hold the send key N in any screen to maximize backlight brightness. Press and hold N again to return to the default brightness setting. customize 41 calls To make and answer calls, see page 24. recent calls Your phone keeps lists of incoming and outgoing calls, even for calls that didnt connect. The most recent calls are listed first. The oldest calls are deleted as new calls are added. Shortcut: Press the send key N to open the recent calls list. Press the navigation key S to scroll and select a call list, scroll to a number, press N to call it. 42 calls To dial a number in the recent calls list:
1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap P to open the recent calls menu. 3 Tap Answered Calls, Missed Calls, or Dialed Calls to select a call list. 4 Tap an entry to call its number. To see details or perform other operations on an entry in the recent calls list:
1 Tap E Recent Calls in the application launcher screen to open the call history screen. 2 Tap Answered Calls, Missed Calls, or Dialed Calls to select a call list. 3 Tap an entry to see call details (time, date, duration). 4 Tap Call to call its number, or tap to perform the following operations:
options Store Create an address book entry with the number stored in the number type field you specify. Open a new text message with the number in the To field. Send MMS Open a new multimedia Send SMS message with the number in the To field. Delete the entry. Delete redial 1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap P, then tap Dialed Calls to open the dialed calls list. 3 Tap the number you want to redial. If you hear a busy signal and you see Call Failed, Number Busy, tap Redial to automatically redial the number. To activate the automatic redial feature:
1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap , then tap Setup to open the phone setup menu. 3 Tap the check box e beside Auto Redial. A check mark d indicates that automatic redial is activated. 4 Tap to exit the phone setup menu. calls 43 hold or mute a call To put all active calls on hold, tap Hold. Tap Hold again to resume the call. To turn off your phones microphone during a call, tap Mute. Tap Mute again to resume the call. call waiting When youre on a call, youll hear an alert if you receive a second call. Tap Answer to put the first call on hold and answer the new call. To switch between calls, tap Switch. To connect the two calls, tap Link. caller ID Calling line identification (caller ID) shows the phone number for an incoming call in your phones display. Your phone shows the callers name and picture when theyre stored in your address book, or Incoming Call when caller ID information isnt available. You can set your phone to play a unique ringtone for an entry stored in your address book (for more information, see page 49). To show or hide your phone number for the calls that you make:
1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap , then tap Setup to open the phone setup menu. 44 calls 3 Tap Show ID, then tap On or Off to show or hide your caller ID for outgoing calls. 4 Tap to exit the phone setup menu. Tip: Select Network Controlled to let the network determine your caller ID status. cancel incoming call While the phone is ringing or vibrating, tap Ignore to cancel the incoming call. Depending on your phone settings and/or service subscription, the call may be forwarded to another number, or the caller may hear a busy signal. emergency calls Your service provider programs one or more emergency phone numbers, such as 911 or 112, that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted. Note: Emergency numbers vary by country. Your phones preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues. 1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap the keypad keys to dial the emergency number. 3 Tap Send to make the call. calls 45 international calls Open the phone keypad, tap , tap Insert, then select Insert + to insert your local international access code
(indicated by +). Then, tap the keypad keys to dial the country code and phone number. Shortcut: Tap and hold the 0 key on the phone keypad to insert your international access code. turbo dial You can store nine phone numbers in the turbo dial list, then dial the numbers by tapping and holding a single keypad number key. To turbo dial a phone number:
1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap and hold a keypad key to dial the phone number assigned to the key. If no number is stored, your phone prompts you to store a phone number in the turbo dial numbers list. To set up the turbo dial numbers list:
1 Tap 9 in the global navigation bar to open the phone keypad. 2 Tap , then tap Setup to open the phone setup menu. 3 Tap Turbo Dialing to open the turbo dial list. 4 Enter phone numbers in the turbo dial list. 46 calls phone dials the number, waits for the call to connect, then prompts you for confirmation before it dials the remaining digits. dial extension number during a call 1 Tap the keypad button to open the phone keypad. 2 Dial the extension number. 3 Tap to return to the in-call screen. dial extension or voicemail number To direct dial an extension number or voicemail number, you can insert a pause character (P) in the dialing sequence. 1 Use the keypad key to dial the phone number. 2 When you need to insert a pause, tap , tap Insert, then select Insert Pause to insert a P at the cursor location. 3 Dial the extension number. 4 Tap Call to make the call. Your phone dials the phone number, waits for the call to connect, then dials the remaining digits. Tip: Use the same procedure to insert a wait character (W) in the dialing sequence. Your calls 47 address book You can store a contact list of names, phone numbers, and email addresses in your phones electronic address book. view contact list Tap 5 in the global navigation bar to open the address book. To change the way your contact list is shown, tap , tap Setup, then tap the Default List Display drop-down menu to select List View or Thumbnail View. use category views Defining categories for your contacts helps you manage address book information. You can classify contacts in different categories according to your communication needs, and 48 address book see contacts by category. Your phone provides the following basic categories:
All Lists all contacts stored on your phone and on your SIM card. Unfiled Lists contacts stored on your phone that are not assigned to a user-defined category. This is the default category setting for new contacts. SIM Card Lists contacts stored on your SIM card. In the contact list, tap the category button in the bottom button bar and select a category name to see only the contacts in that category. Tip: To create and/or edit your own user-defined categories, see page 53. view and edit contact details 1 In the contact list, tap a contact name to see its details. 2 Tap Edit to edit the contact. Your phone shows complete contact details. 3 To edit contact information, tap the direct line in the field you want to edit. 4 When you are finished editing contact information, tap Done to store your changes and return to the contact list. add new contact Contacts can be stored to phone memory or SIM card memory. To set the default storage location, see page 52. Note: You can enter only a name and a single phone number for each contact that you store on the SIM card. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap New Contact. 3 On the new First Name:
Last Name:
<Mobile>
<Home>
<Work>
<Fax>
<Email>
Category: Unfiled contact screen, tap the Photo field to assign a picture ID to the entry. Your phone shows the picture when you receive a call from this contact. Done 4 Tap the direct line in a field to enter contact details. Pull down the scroll bar to see additional fields. 5 To set a distinctive ringtone for the contact, tap the RingTone field and select Browse. Scroll to select the desired tone and tap OK. Your phone sounds the address book 49 ringtone when you receive a call from this contact. the group, and the group must contain at least one member. 6 When you are finished entering information, tap Done to store the contact. 4 When you finish entering information, tap Save to store the group. create group You can create a group mailing list consisting of multiple contacts stored in the address book. Groups make it easy for you to send a message to multiple recipients simultaneously. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap New Distribution List. 3 Tap Messaging or Email to specify the default type of message to send to the group, then tap OK. You must enter a name for call or send message 1 Tap 5 in the global navigation bar to open the address book. 2 Tap a contact name to see its details. 3 In the details list:
Tap the phone number following the mobile phone indicator c to call the contacts mobile phone. Other indicators may identify other numbers stored for the contact (such as home, work, or fax). 50 address book
Tap the message indicator a to the right of a phone number to send an SMS or MMS message to the number.
Tap the email address following the email indicator b to send an email message to the address. Alternatively, tap the message indicator a to the right of the email address to send an MMS message to the address. search Tip: To quickly search for a contact by name, tap the quick search icon in the lower right corner of the contact list, then enter the first few letters of the name you want. To do a comprehensive search of the contact list by name, number, or other information stored for a contact:
1 Tap 5 in the global navigation bar to open the address book. 2 Tap , tap More, then tap Find Contacts. 3 Select Contacts Name, Number, or Other, enter the desired information in the Search Text field, then tap Find. Your phone shows the search result, or notifies you that no match can be found. To continue searching, tap Find New. To return to the contact list, tap . address book 51 storage location Contacts can be stored to phone memory or SIM card memory. You can set the default memory location where new address book contacts are stored. Note: You can enter only a name and a single phone number for each contact that you store on the SIM card. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap Setup. 3 Tap the Default Memory Location drop-down menu to set the default memory location. 4 Tap Save to save the setting. sort 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap Setup. 3 Tap the Sort Names By drop-down menu to sort the contact list by First Name or Last Name. 4 Tap Save to save the setting. delete contact 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap Delete Contacts. 3 Check the contact(s) you want to delete, then tap Delete. 4 Tap OK to confirm the deletion. 52 address book copy contacts You can copy contacts between your phone and SIM card. This procedure does not delete the original contact. Note: The SIM card can store only a name and one phone number per contact. When you copy an entry from the phone to the SIM card, your phone prompts you to specify the number you want to store for the contact. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap Copy to SIM/Phone. 3 Select Phone to SIM or SIM to Phone, then tap OK. 4 Check the number(s) you want to copy. If you copy from the SIM card to phone memory, specify the number type. 5 Tap OK to copy the numbers to the new location. Note: The number of entries you can store on your SIM card depends on the SIM card capacity. The types of entries that can be copied to the SIM card may vary depending on the function of the SIM card. categories Your can create user-defined categories to organize your contacts. create a new category 1 Tap 5 in the global navigation bar to open the address book. 2 Tap the category button in the bottom button bar, then tap Edit Category. address book 53 3 Tap , then tap New to create a new category. 4 Tap Select to add the selected contacts to the category. 4 Tap the Name field to assign a name to the category, then tap OK. 5 Tap Add Members, then check the contacts you want to add to the category. 6 Tap Select to add the selected contacts to the category. add members to a category 1 Tap 5 in the global navigation bar to open the address book. 2 Tap the category button in the bottom button bar, then tap Edit Category. 3 Select the category, tap Add Members, then check the contacts you want to add to the category. 54 address book set category ringtone You can set a special ringtone to play when you receive calls from contacts in a specific category. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap the category button in the bottom button bar, then tap Edit Category. 3 Select the category, tap , then tap Category RingTone. 4 Tap the RingTone drop-down menu, then tap Browse to look for the ringtone you want to use. 5 Scroll to select the desired ringtone, then tap OK. 6 Tap Save to save the setting. delete a category You can delete a user-defined category in your address book. Any contacts assigned to the deleted category revert to the default Unfiled category setting. Note: You can not delete the predefined categories in your address book. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap the category button in the bottom button bar, then tap Edit Category. 3 Select the category, tap , then tap Delete. 4 Tap OK to confirm the deletion. check capacity You can see the number of address book entries currently stored on the phone and SIM card, and the total number of entries you can store on the SIM card. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , tap More, then tap Memory Status. Your phone shows the number of phone and SIM card contacts, and the SIM card capacity (number of contacts). 3 Tap to return to the address book. address book 55 6 Tap OK to send the contact information in a vCard. For more information about using a Bluetooth wireless connection, see page 114. synchronize contacts You can synchronize contacts with your PC through a Bluetooth wireless connection or USB cable connection using Motorola mobile PhoneTools software. For more information, see page 118. share contact You can share contact information with others by sending the data as a vCard to another phone, PC, or hand-held device. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap the name of the contact you want to send. Your phone shows contact details. 3 Tap , then tap Share. 4 Tap Bluetooth, then tap OK to exchange the data through a Bluetooth wireless connection. or Tap Message or Email, then tap OK to send the contact data in an MMS or email message. 5 Complete the setup procedure for the transfer method you selected. 56 address book owners information You can store information about yourself in the address book. Then, if you lose your phone, the person who finds it can contact you to return the phone. 1 Tap 5 in the global navigation bar to open the address book. 2 Tap , then tap Owners Information. 3 If owners information is stored, the phone show the owners contact details. Tap Edit to edit the owners information. 4 If owners information is not stored, the phone shows the owners information entry screen. Enter information as you would for a new contact (see page 49.). 5 When you are finished entering information, tap Done to store the owners information. address book 57 messages You can send and receive short text-based SMS messages, and multimedia MMS messages containing media objects such as photos, pictures, animations, sounds, voice records, and video clips. Note: Your phone sends an SMS text message by default, unless you insert multimedia content or perform a function reserved for MMS multimedia messages. Instant messaging lets you exchange messages in real time with other wireless phone users. 58 messages message center Note: You must set up your message service before you can send and receive messages. Usually, your service provider has already set up the message inbox for you. For setup instructions, see page 69. Tap 7 in the global navigation bar to open the message center. Your messages are stored in different folders in the message center. The number to the right of each folder name indicates the Inbox SIM Card Drafts Outbox Sent Items Trash 0 [0]
0 [0]
0 [0]
0 [0]
0 [0]
0 [0]
Compose number of messages it contains. Tap a folder to see its contents. The message center contains the following folders:
Inbox Stores SMS and MMS messages you have received. You can move messages from the Inbox to other folders, including personal folders that you create. For more information about creating folders, see page 67. SIM Card Contains SMS messages stored on your SIM card. You can move these messages to other folders. Drafts Temporarily stores messages that you are still writing. Outbox Stores your messages that have not yet been sent. Sent Items Stores copies of messages you have sent. Trash Stores messages you have deleted. If you have not permanently deleted a message, you can retrieve it. You can create additional personal folders to organize and store your messages. signature You can store your signature, and automatically or manually append it to the messages you send. 1 Tap 7 in the global navigation bar to open the message center. 2 Tap , then tap Signature Editing to open the signature editing screen. 3 Tap the direct line in the Signature Content field to enter your signature. 4 If you want your phone to automatically add your signature to all outgoing messages 59 messages, tap the check box e below the signature. A check mark d indicates that automatic signature is activated. 5 Tap Save to store your signature. send text message You can send an SMS short text message to other wireless phone users, and to email addresses. To compose and send an SMS message:
1 Tap 7 in the global navigation bar to open the message center. 2 Tap Compose. 3 Tap the message field, then tap the text entry method drop-down menu at the bottom of the screen and select an entry method to enter text in the message field. When you are finished, tap in the 60 messages lower right corner of the screen to hide the text entry keyboard or pad. Alternatively, you can tap , tap Load, then tap Quick Text to insert a prewritten quick text note in the message field 4 Tap To to select contacts from your address book, or tap the direct line in the To field to enter a phone number or email address. 5 Tap Send to send the message. When composing an SMS message, you can tap to perform various operations on the message prior to sending it. The SMS menu can include the following options:
options Load Insert a quick text note or auto-signature in the message. options Save To Send Options Delete Save the message to the Drafts folder. Receipt Request: Request a delivery report for the message. Expire After: Set the expiration time for an undelivered message. Delete the message. send multimedia message A Multimedia Messaging Service
(MMS) multimedia message contains one or more pages with text and embedded media objects (including photos, pictures, animations, sounds, voice records, and/or video clips). You can send an MMS message to other wireless phone users, and to email addresses. To compose and send an MMS message:
1 Tap 7 in the global navigation bar to open the message center. 2 Tap Compose to open the message composition screen. MMS 0.00k 1/1 To... 3 Tap the message field, then tap the text entry method drop-down menu at the bottom of the screen and select an entry method to enter text in the message field. When you are finished, tap in the lower right corner of the screen to hide the text entry keyboard or pad. Send messages 61 4 Tap a button in the media toolbar at the bottom of the screen to insert media objects on the page or attach files to the message.
Tap j to insert a picture, video, or new drawing on the page.
Tap F to insert a sound file or new voice record on the page.
Tap G to activate the camera, take a photo or record a video clip, and insert it on the page.
Tap h to attach a contact, event, task, or file to the message. 5 To add a new page after the current page, tap i. Repeat steps 3 and 4 to enter contents for the new page. 6 Tap To to select contacts from your address book, or tap the direct line in the 62 messages To field to enter a phone number or email address. 7 Tap Cc, Bcc, or Subject to enter additional recipients or a message subject. (Use the MMS menu, described below, to show or hide these fields.) 8 Tap Send to send the message. When composing an MMS message, you can tap to perform various operations on the message prior to sending it. The MMS menu can include the following options:
options Load Save To Insert a quick card, quick text note, or auto-signature in the message. Save the message to the Drafts folder, or save it as a quick card. options Send To Blog Page Duration Preview Show Send the message to your personal Web log. Set the number of seconds each page is shown. Preview the MMS message. Show or hide the Cc, Bcc, and/or Subject header fields. Use Cc or Bcc to carbon-copy or blind-carbon-copy the message to additional recipients. Use Subject to specify a subject for the message. options Send Options Delete Receipt Request: Request a delivery report for the message. Expire After: Set the expiration time for an undelivered message. Priority: Set message priority. Expire After: Set a time and date for your phone to send the message. Delete the current page, delete an object on the page, or delete the message. messages 63 unsent messages Outgoing messages that failed to send or have not yet been sent are stored in the outbox. On the message center screen, tap Outbox to see its contents. Messages in the outbox are sorted from newest to oldest. Tap a message to read it. You can edit the message while it is open. tips for sending messages
When you enter an SMS text message, a counter at the top right corner of the display shows the number of characters left on the current page, and the number of pages you have written
(character#/ page#). Network charges 64 messages are based on the number of pages sent.
When you enter an MMS multimedia message, a counter at the top of the display shows the current message size in kilobytes. Another counter shows the number of pages.
When you manually enter phone numbers and/or email addresses in the To field, you must insert a comma between each entry. receive message Your phone shows the new message icon 8 in the global navigation bar when you receive a new message. Tap 8 to see message details (sender, subject, time, and size). Tap Read to read an SMS message. Tap Download to download an MMS message to your phone, then tap Read to read it. Tap to return to the previous screen without reading the message. The message is stored in the inbox. Tap to perform various operations on the message. The received message menu can include the following options:
options Reply With Original Call Back Forward Include a copy of the original message in your reply. (SMS only) Call a phone number embedded in the message header or message body. Open a copy of the message, with an empty To field. options Save Address Save Object Save a media object in the Save the senders email address. message. (MMS only) Save the current MMS page as a quick card. You can insert the quick card into MMS messages that you compose. (MMS only) Move the message to another folder. Delete the message. Save As Quick Card Move To Folder Delete Message When your phone shows Memory is Full!, you must delete some existing messages from your inbox, outbox, or drafts folder to receive new messages. messages 65 read and reply Messages that you receive are stored in the inbox. On the message center screen, tap Inbox to see its contents. Messages in the inbox are sorted from newest to oldest. Tap a message to read it. Your phone shows the senders name (if stored in your address book) or phone number, the message contents, and the time it was sent.
Tap Reply to send a reply to the message
Tap to return to the previous screen without making any changes. store message object To store a media object contained in a multimedia message, tap and hold the 66 messages object to open a pop-up menu, then select Save to store the object on your phone. If the object is contained in a message attachment, tap and hold the attachment to open a pop-up menu, then select Save to store the object. sort messages On the Inbox, Outbox, or Trash screen, tap , then tap Sort By to sort messages by Time, Subject, or Name. drafts Messages that you are still writing are stored in the drafts folder. On the message center screen, tap Drafts to see its contents. Tap a message to read it. You can edit the message while it is open, and then send it immediately. deleted messages Messages that you delete are stored in the trash folder. On the message center screen, tap Trash to see its contents. Tap a message to read it. You can edit the message while it is open. Tap Delete All to permanently delete all messages in the trash folder. messages on SIM card On the message center screen, tap SIM Card to see the messages stored on your SIM card. Tap a message to read it. create folder You can create one or more personal folders to store your messages, and lock your personal folders to prevent other users from reading the messages stored in them. To create a personal folder:
1 Tap 7 in the global navigation bar to open the message center. 2 Tap , then tap New Folder. 3 Tap the direct line in the Name field to enter a name for the folder. 4 To lock the folder to prevent unauthorized access, tap the check box e beside Protected by Lock Code?. A check mark d indicates that the folder lock feature is activated. 5 Tap Done to save the folder. messages 67 The personal folder is listed on the message center screen along with your other folders. If the personal folder is locked, your phone prompts you to enter the phone unlock code when you try to open the folder or move a message to it. Enter your unlock code to open the folder. To edit a personal folder, open it and tap , then tap Folder Setup. You can change the folder name, and turn the folder lock feature on or off as desired. To delete a personal folder, open it and tap , then tap Delete Folder. Tap OK to confirm the deletion. Note: You must remove all messages from a personal folder in order to delete it. 68 messages move messages You can move messages between folders. For example, you can move a message from the inbox to the SIM card folder and take it with you when you use your SIM card in another phone, or move it to a locked personal folder to prevent others from reading it. To move messages to another folder:
1 Tap 7 in the global navigation bar to open the message center. 2 Open the folder that contains the message(s) you want to move. 3 Tap , then tap Move. 4 Tap the check box e beside each message you want to move, or tap the check box beside All to select all messages. A check mark d indicates that the message is selected. 5 Tap OK to open the move to folder screen. 6 Tap the destination folder, then tap OK to move the messages. Tip: To quickly move a single message, tap and hold the message to open a pop-up menu, then select Move to Folder. set up message service 1 Tap 7 in the global navigation bar to open the message center. 2 Tap , then tap Service Setup. 3 Tap Short Message or Multimedia Message to configure your SMS or MMS inbox settings as described in the following section. SMS setup options Note: Actual field names and values may vary depending on the technologies available to your service provider. Some settings may not be available for all phone models. options Server Center Number Expire After Number of days your network Number of the center that handles your outgoing text messages. should attempt to send undelivered text messages. 4 When youre finished, tap OK to save your settings. messages 69 MMS setup options Note: Actual field names and values may vary depending on the technologies available to your service provider. Some settings may not be available for all phone models. options Default Profile Select an MMS network profile.
(See next section to edit profile settings or create a new network profile.) Expire After Number of days your network should attempt to send undelivered MMS messages. Maximum size of incoming multimedia message to be downloaded to your phone. Max Sending Size 70 messages options Auto Download Show My Number Allow Delivery Report Block Senders Reject Read Reply Request Auto Retry Automatically download MMS messages to your phone. You can set this function to be disabled when roaming, and set a maximum file size for auto-downloaded messages. Send your number with outgoing MMS messages. Send a delivery report for an incoming MMS message when requested. Block incoming MMS messages from specific senders. Do not send a reply to the sender when you read a new received message. Automatically attempt to resend messages when delivery fails. MMS network profile setup You can edit an existing MMS network profile or create a new MMS network profile. 1 Tap 7 in the global navigation bar to open the message center. 2 Tap , then tap Service Setup. 3 Tap Multimedia Message to open the MMS inbox setup editor. 4 Tap the folder tree icon _ in the Default Profile field to open the MMS profile list. 5 To edit an existing MMS network profile, highlight the profile, tap , then tap Edit. or To create a new MMS network profile, tap , then tap New. 6 When youre finished, tap Save to save your settings. You must enter the following configuration settings. If necessary, contact your service provider to obtain the following information:
options Profile Name MMSC Network Profile WAP Gateway IP Enter the profile name. Select the server you want to use (information may be viewable only). Select a network connection profile to connect to the Internet. For more information, see page 98. Primary service gateway IP address for your WAP service provider. Port Number Primary service port number. messages 71 options WAP Gateway IP(2) Port Number Secondary service port number. Secondary service gateway IP address. browser messages You r networks Web server can send you browser messages that you read in your micro-browser. Your phone shows the new message icon 8 in the global navigation bar when you receive a new browser message. Tap Read to read the message. You must activate the feature to receive browser messages. 1 Tap 7 in the global navigation bar to open the message center. 72 messages 2 Tap , then tap Service Setup. 3 Tap Browser Message to open the WAP push editor. 4 Tap Receive All to receive all browser messages, or Restricted to restrict the browser messages you receive. 5 Tap Save to save the setting. information service messages Information service messages are broadcast messages that you can receive, such as stock updates, news headlines, or sports scores. Your phone shows the new message icon 8 in the global navigation bar when you receive a new information service message. Tap Read to read the message. Note: You must set up your information service before you can receive information service messages. Usually, your service provider has already set up the information service for you. 1 Tap 7 in the global navigation bar to open the message center. 2 Tap , then tap Service Setup. 3 Tap Info Service to open the info service setup editor. 4 Tap Service On to activate info service on your phone. 5 Tap Active Channels... to set subscription channels. 6 Tap , then tap New Channel to add a new channel. or Tap , then tap Delete Channels to delete one or more channels. 7 Tap Save to save your settings. 8 Tap OK to exit the active channels menu. 9 Tap Languages to set the languages in which you receive cell broadcasts. 10 Set the first and second languages, then tap Save to save the language settings. 11 Tap Save to save your info service settings. messages 73 office applications email You can send and receive email messages with your wireless phone. Tip: To send and receive email messages, you must have an Internet connection, and have a POP3, IMAP, or SMTP email account on the Internet or your service providers network. If necessary, see page 98 for information on how to set up a network connection profile. mailboxes and folders Note: You must set up your email mailbox before you can send and receive email messages. Usually, your service provider has already set up the email mailbox for you. For setup instructions, see page 77. 74 office applications Tap I Email in the application launcher screen to launch the email application. Email messages are stored in different folders in your email mailbox:
Inbox Email messages you have received. Outbox Your emaill messages that have not yet been sent. You may have additional folders in an email mailbox, such as Drafts, Sent Items, Trash, or personal folders that you create. If you have separate mailboxes for different email accounts, tap the Mailbox field at the top of the email message screen to select the mailbox you want to use. Your phone shows the folders associated with the selected mailbox. send an email message You can send an email message to one or more recipients. You can manually enter each recipients email address, or select addresses from the address book. When you manually enter email addresses, you must insert a comma, semicolon, or colon between each address. To compose and send an email message:
1 Tap I Email in the application launcher screen to launch the email application. 2 Tap , then tap New Email to open the email message composition screen. 3 Tap the direct line in the Subject field to enter a subject for the message. 4 Tap the message field, then tap the text entry method drop-down menu at the bottom of the screen and select an entry method to enter text in the message field. When you are finished, tap in the lower right corner of the screen to hide the text entry keyboard or pad. 5 Tap To to select contacts from your address book, or tap the direct line in the To field to enter an email address. 6 Tap Send to send the message. When composing an email message, you can tap to perform various operations on the message prior to sending it. The email menu can include the following options:
options Save to Draft Insert Signature Save the message to the Drafts folder. Append your signature to the end of the message. office applications 75 options Cc and Bcc Options Show Cc and/or Bcc header fields to carbon-copy or blind-carbon-copy the message to additional recipients. Attachments Attach a contact, calendar event, task, or media object to the message. Set message priority. Delete message attachments. Priority Delete Attachment receive an email message Email messages that you receive are stored on your service providers email server until you download them to your phone. Tap I Email in the application launcher screen to launch the email application. Tap Send/Rec. to 76 office applications download new received messages to your phone. When you download an email message:
Tap . to see message details (sender, subject, time, and size).
Tap the message to read it.
Tap Reply to send an email reply to the message.
Tap to perform various operations on the message. The received email message menu can include the following options:
options Save File Move To Folder Save a media object attached to the message. Move the message to another folder. options Delete Message Delete the message. create a personal folder The procedures for creating and using a personal folder are similar to the corresponding message center procedures. See page 68 for more information. set up the email mailbox If the phone cannot locate your email mailbox, it opens the mailbox setup screen for you to configure your mailbox settings. automatic setup 1 Select your email service provider from the mailbox setup list, then tap OK. 2 Enter your User Name and Password in the appropriate fields, confirm your password in the Reenter Password field, then tap OK. 3 To edit email sending, receiving, signature, connections options, tap the mail box name you wish to edit. Then enter settings as described in the following section. manual setup If your service provider is not listed on the mailbox setup list, you can manually set up your email mailbox as follows:
1 Tap Setup Manually on the mailbox setup screen to manually enter email settings, then tap OK. 2 Tap the Mailbox Name field and enter your mailbox name. office applications 77 3 Tap Send Setup and Receive Setup to configure your email sending server and receiving server settings as described below. 4 Tap Signature Setup, If you want your phone to automatically append your signature to all outgoing email messages, tap the check box e beside Add signature to all outgoing messages. A check mark d indicates that automatic signature is activated. 5 Tap the signature field and enter your signature. 6 Tap OK to save your signature. 7 Tap Connections Setup, then select the type of connection desired and tap OK. 8 Tap OK to store your mailbox settings. send setup options Note: Actual field names and values may vary depending on the technologies available to your service provider. Some settings may not be available for all phone models. options Server Port Email Nickname IP address or host name that handles your outgoing email. Port number for sending host. Your email address. Name to be inserted before your return address, if desired. 78 office applications options Authentication Set Authentication to On if you need a user name and password to access your outgoing email server. Set Same as Receive if user name and password are the same as for your incoming email server. Otherwise, enter your outgoing email server User Name and Password, and confirm your password in the Reenter Password field. receive setup options Note: Actual field names and values may vary depending on the technologies available to your service provider. Some settings may not be available for all phone models. options POP3 or IMAP Server Port User Name User Password Reenter Password Select the protocol to communicate with the receiving host: POP3 or IMAP. IP address or host name that handles your incoming email. Port number for receiving host. Your user name. Your user password. Confirm your user password. office applications 79 options Check All Folders Save Special Folders Message Size Limitation Select to check all folders for email. Set the Root Folder Path that your phone should search. Select to specify additional email folders. You can set the Sent Items Path and the Drafts Path. Maximum size of an email message to be downloaded to your phone. options Keep on Server Select to save copies of your email messages on the remote server. (For POP3, prevents message deletion on remote server after message is downloaded to your phone. For IMAP, prevents message deletion on remote server after message is deleted on your phone.) 80 office applications calendar You can use your phones calendar to schedule and organize events such as appointments and meetings. Tap J Calendar in the application launcher screen to schedule or review calendar events. S Oct 2008 TWTM month view The calendar initially shows a calendar for the month. Tap or to go to the previous or next month. An indicator in the lower left corner of the date box indicates that one or more events are scheduled for the day. Month S 4 28 29 15 16 12 13 14 22 23 24 25 21 44 40 30 31 26 27 41 42 43 20 18 19 17 10 11 1 2 3 8 9 5 6 7 F Tap the date box to see the days events. Tap an event to see event details. 14 15 8am SF 17 18 TWTM 13 16 Oct 2008 Week 42 S 12 week view Tap the Month button in the bottom button bar, then select Week to see the week view. Tap or to go to the previous or next week. Vertical bars indicate scheduled events for the day. A horizontal bar below the date indicates a full-day event. Tap the day to see the days events. Tap an event to see event details. Week 12pm 10am 11am 1pm 9am office applications 81 Thu Oct 16 2008 9am 8am day view Tap a day in the month or week view to see the days events. Alternatively, you can tap the Month button in the bottom button bar, then select Day to see the highlighted day. Tap or to go to the previous or next day. Tap an event to see event details. 12pm 10am 11am 1pm 2pm Date Day 2 Tap the day to which you want to add an event. Your phone lists the days events. 3 Tap , then tap New Event to open the new event editor. Shortcut: Tap an hour in the day view to add an event at that time. 4 Tap the direct line Create new event Subject... Location... All day event Start: 12:00 10-16-2008 End:
13:00 10-16-2008 Save in a field to enter event details. Pull down the scroll bar to see additional fields. add new event You can create an event, and set your phone to remind you when the event time arrives. 1 Tap J Calendar in the application launcher screen to open the calendar. 5 When youre finished entering information, tap Save to store the event. schedule a meeting You can send a meeting request message to other wireless phone 82 office applications users, and to email addresses. The meeting is added to your calendar, and to the calendars of the message recipients. 1 Tap J Calendar in the application launcher screen to open the calendar. 2 Tap , then tap New Meeting Request to open the meeting request editor. 3 Tap the direct line in a field to enter meeting details. Pull down the scroll bar to see additional fields. 4 When youre finished entering information, tap Send to send the meeting request and add the meeting to your calendar. edit an event 1 Tap the event to see event details. 2 Tap Edit to open the event editor. 3 Tap the direct line in a field to edit its contents. Pull down the scroll bar to see additional fields. 4 When youre finished editing information, tap Save to store the event. delete an event 1 Tap the event to see event details. 2 Tap , then tap Delete. 3 Tap OK to confirm the deletion. Alternatively, to delete an event, tap and hold the event title, then select Delete from the pop-up menu. dismiss reminder alarm When you set a reminder alarm for an event, the phone shows an event reminder and sounds a reminder alarm. office applications 83 Tap Snooze to turn off the reminder alarm for a short period of time. The reminder alarm sounds again when the snooze period expires. Tap Cancel to dismiss the reminder alarm. If you have more than one event set up for the same time, the phone shows each event in sequence. As you read and dismiss each event reminder, the next event is shown. change the calendar setup You can set the calendars default view
(month, week, day), weekly start day, daily start time, reminder snooze period, event storage period, alarm timeout, and lunar calendar. When you select Alarm When Power Off in the calendar setup screen, your phone turns itself on if necessary to remind you about scheduled events. 84 office applications 1 Tap J Calendar in the application launcher screen to open the calendar. 2 Tap , then tap Setup. 3 Tap a field to change its setting. Pull down the scroll bar to see additional fields. 4 When youre finished changing settings, tap Save to store the settings. share event information You can share calendar events with others by sending the data as a vCalendar entry to another phone, PC, or hand-held device. 1 Tap J Calendar in the application launcher screen to open the calendar. 2 Tap the name of the event you want to send. Your phone shows event details. 3 Tap , then tap Share. 4 Tap Bluetooth, then tap OK to exchange the data through a Bluetooth wireless connection. or Tap Message or Email, then tap OK to send the event data in an MMS or email message. 5 Complete the setup procedure for the transfer method you selected. 6 Tap OK to send the event information in a vCalendar entry. For more information about using a Bluetooth wireless connection, see page 114. synchronize calendar entries You can synchronize calendar entries with your PC through a Bluetooth wireless connection or USB cable connection using Motorola mobile PhoneTools software. For more information, see page 118. tasks You can create and review a checklist of tasks you need to perform, and set your phone to notify you when task deadlines arrive. add new task 1 Tap L Tasks in the application launcher screen to open the task list. 2 Tap , then tap New. 3 Tap the direct line in a field to enter task details. 4 When youre finished entering information, tap Save to store the task. office applications 85 view tasks Tap L Tasks in the application launcher screen to open the task list. Tap a task to see its details.Tap the check box e beside the task name to indicate that youve completed the task. Tap and hold on a task to open a pop-up menu from which you can Share, Edit, or Delete the task. To sort the task list, tap the sort order button in the bottom button bar. You can choose to see All Tasks, Unchecked tasks, Due Tasks, or Completed tasks. Tap to perform various operations on the task list. notes You can write and store notes on your phone. 1 Tap U Notes in the application launcher screen to open the notes editor. 2 Tap the text line and enter the information on the keypad you want to record. 3 When you are finished entering information, tap to close the keypad and tap Save. 4 Enter a name, storage location, and type for the note. 5 Tap Save to save the note. To read a note that you have saved, tap , tap Open, then select the note you want to open. 86 office applications viewer The viewer application provides an easy way for you to read documents stored on your phone. Tap Viewer in the application launcher screen to open the viewer application. Your phone shows the file folders included on your phone (see page 89 for folder descriptions). Tap a folder to see its contents. Tap a document to open it in the viewer. You can scroll through a large document by dragging the stylus across the screen and dragging the document in the direction you want to move. To zoom in or out on a document, tap the center of the screen, release, then quickly tap and hold the screen and drag the stylus up or down to adjust the document size. To reflow the text or make other view adjustments, tap to open the menu, tap View, then tap Rotate Screen, Reload the document, Fit to Width, or Fit to Height. For more information about how to use the viewer, tap to open the menu, then tap Help. calculator You can use your phone as a calculator. Tap Q Calculator in the application launcher screen to open the calculator. Tap the numeric and calculation keys to perform a calculation. office applications 87 Tap = to calculate the result. Tap C to clear the calculation. Tap to clear the last entry, one digit at a time, when performing a calculation. Tap to exit the calculator and return to the application launcher screen. Tap the following keys to perform the described functions:
functions
M MR MC Change the entrys sign
(positive/negative). Store the current number in memory. Show the stored number. Clear the stored number. 88 office applications alarm clock Your phone has an alarm clock with two separate alarms that you can set to alert you at the time(s) you specify. 1 Tap Z Alarm Clock in the application launcher screen to open the alarm clock setup screen. 2 Tap the check box e beside an alarm to activate it. A check mark d indicates that the alarm is activated. Alarm 1 17:00 Alarm 2 17:15 Snooze: 5 min Alarm when powered off Save 3 Tap below the alarm name to set the alarm time. Set the desired time, then tap OK to store it. 4 Tap Snooze to set the snooze period. 5 Tap Save to store your settings. When the alarm time arrives, your phone shows an alarm reminder and sounds an alert. Tap Snooze to turn off the event reminder for a short period of time. The alarm sounds again when the snooze period expires. Tap Dismiss to turn off the alarm. When you select Alarm When Power Off in the alarm clock setup screen, your phone turns itself on if necessary to alert you when the alarm expires. file manager The file manager application makes it easy for you to create personal folders to store and manage your files and applications. Tap 2 File Manager in the application launcher screen to open the file manager. Your phone lists the available storage devices
(such as Phone memory, and an optional removable Memory Card). Tap a storage device to see the root directory for the device. Your phone includes several predefined folders:
MyImages MyAudio MyVideo MyNotes Stores photos that you take with your phones F Camera. Stores ringtones you download to your phone, and sound files you record with the % Recorder application. Stores video clips that you record with your phones F Camera. Stores notes that you write with the U Notes application. office applications 89 MyPrograms Preload Stores applications that you download and install on your phone. Stores preloaded media files installed on your phone. Note: Your phones files and folders may differ from those listed above. edit files and folders Tap and hold a file or folder to open a pop-up menu to perform various operations on the file/folder. The edit menu can include the following options:
options Open With Specify the application your phone should use to open the file (files only). 90 office applications options Share Install Copy or Cut Move To Rename Delete Properties Send the file to another phone, PC, or hand-held device (files only). Install the selected file (files only). Copy or cut the file or folder to the clipboard. (Tap , then tap Paste to paste the clipboard contents in the current folder.) Move the file or folder to a new location. Rename the file or folder. Delete the file or folder. See information about the file or folder. create new folder 1 Tap 2 File Manager in the application launcher screen to open the file manager. 2 If necessary, tap the folder tree icon _ to select the location (phone or memory card) where you want to create the folder. 3 Tap , then tap New Folder. 4 Enter a name for the folder. 5 Tap Save to save the folder. view To change the way your files and folders are shown, tap , then select List View or Thumbnail View. sort To change the way your files and folders are sorted, tap , then tap Sort by. You can sort files or folders by Time, Name, Size, or Type. search To search for a specific file:
1 Tap , tap More, then tap Search. 2 Enter the name of the file in the File Name field. 3 Specify the file type in the File Type field. 4 Tap Search to begin the search. If the file is found, the filename is listed. Tap the filename to open the file. Tap and hold the filename to see the file path. If the file is not found, tap to return to the file manager screen, or tap Retry to try another search. office applications 91 folder tree Tap the folder tree icon _ in the file manager screen to see the folder structure and organization of your phone, or a storage device connected to the phone. removable memory card You can use an optional removable SD memory card or MMC memory card with your phone to store and retrieve multimedia objects (such as photos, video clips, and music files). To insert a memory card in your phone, see page 22. Tap 2 File Manager, then tap the memory cards name to see its root directory. Tip: Tap and hold on the memory cards name to open a pop-up menu to Format the memory card or see memory card Properties. Tap to perform various operations on the memory card. The storage device menu can include the following options:
options New Folder List View or Thumbnail View Share Move Paste Sort By Create a new folder on the memory card. See memory card files and folders in a text-based List View or graphic icon Thumbnail View. Send a file to another phone, PC, or hand-held device. Move a file to a new location. Paste the clipboard contents at the current location. Sort memory card files or folders by Time, Name, Size, or Type. 92 office applications options Delete More Delete a memory card file or folder. Search for a memory card file or folder. Tap Properties to see information about a file or folder. business card reader The business card reader application lets you use your phones camera to capture a business card image, then store the cards information as a contact in the phones electronic address book. Capture Business Card Business Card Reader capture business card image Tap 0 BC Reader in the application launcher screen to open the business card reader application. Tip: Tap Help to see instructions on how to position and frame the business card that you want to capture. Slide the camera mode switch down to put the camera lens in macro mode. Tap Capture Business Card to activate the camera and open the Help Camera Mode Switch Up = normal picture mode. Down = macro mode. 2.0 mega pixels office applications 93 Optical Character Recognition (OCR) viewfinder. Use the red border in the OCR viewfinder to vertically frame the business card you want to capture. Position the camera so that the card fills the frame without extending beyond the frame borders. The framing border and center indicator turn green when the business card is properly framed. Your phone automatically captures a business card image when the card is properly framed in the OCR viewfinder. (To activate or deactivate the auto-capture feature, see business card reader settings on page 95). If auto-capture is turned off, press the camera key, tap Capture, or press the center key s to capture the business card. edit business card information Your phone interprets the text on the captured business card image, and sorts the text into logical categories. The character recognition software may misinterpret a text string or assign it to the wrong category. On the edit business card screen, tap a category name to change the assigned category. Tap the direct line in a category to edit its contents. If more categories are available, pull down the scroll bar on the right side of the screen to see and edit their contents. To add another category to the list, tap , then tap Add Items. To delete one or more categories from the list, tap , then tap Delete Items. 94 office applications To see the business card while you edit its details, tap , then tap Show Card Image. To move the card image, tap and drag the image in the direction you want to move. To zoom in/out on the card image, tap , then tap Zoom In or Zoom Out. On the card image, tap the small box to the left of an outlined text string to see its assigned category and content in the upper part of the screen. When youre finished editing business card details, tap Save to save the information as a new contact in your phones address book. business card reader settings Tap , then tap Setup to adjust business card reader settings. Select Auto Capture to have your phone automatically capture a business card image when the card is properly framed in the OCR viewfinder. You can set your phone to automatically Delete Image or Save Image for a captured business card after you save its contact information in the address book. Use the Always Show list to select information categories that you always want to show in the edit business card screen. recognize stored business card To recognize and edit a business card image that youve already captured and stored on your phone, tap 0 BC Reader in the application launcher screen to open the business card reader application, tap , tap Open Business Card, then tap the card you want to recognize and add to the contact list. office applications 95 interact with web pages Pull down the scroll bar to scroll through a text page or option list. Tap an option to select it. Tap at any time to return to the previous screen. Some Web pages may contain text fields for exchanging information with a Web site. Tap the field and enter text in the usual way. media applications browser The browser lets you access Web pages and Web-based applications on your phone. Contact your service provider to set up access, if necessary. start a browser session Press the browser key T to launch the browser. If you are unable to establish a network connection with the browser, contact your service provider. 96 media applications Tap to perform various browser operations. The browser menu can include the following options:
options View options Go To Page Home Bookmarks History File Enter a Web address (URL) to go to a Web site. Go to the homepage of the current Browser profile. See a list of your bookmarks. Tap to add a New bookmark, or Open, Edit, Delete, or Share the highlighted bookmark. See a list of Web sites you have visited. Tap to Open or Delete the highlighted Web site. Save a file or Save All files in the browser window, Copy a file, tap About Opera to see browser information. Active Pages Setup Set browser view to Fit to Screen or Full Screen, set text size to Small, Medium, or Large, zoom in or out on the Web page, or select a Custom Zoom setting. Bookmark the active page, show the security level, or change encoding of the active page. Add and edit browser profiles, adjust browser preferences, show SSL and WTLS certificates, empty the cache, and delete cookies. download files You can download a file, game, or application from a Web page onto your phone by selecting its link. media applications 97 You must specify the location where you want to save the file, and your phone must have sufficient memory storage space to store the file. You can purchase games, applications, and multimedia content for your phone. In most cases, you can download and preview content before you purchase it. After previewing the content, you can choose to discard it, or purchase it and install it on your phone. Notes:
Call charges apply during download sessions.
Some games might make your phone vibrate. Some ringtones vibrate automatically. If you use one of these tones, your phone vibrates even when it is not set to a vibrate ring style. 98 media applications close the browser Tap to close and exit the browser application. network connection profiles You can use different Internet accounts to connect to the Internet in different ways. Use the network feature to select or create a network connection profile for an Internet account. select a profile To select a network connection profile, tap T Setup in the application launcher screen, tap Data Network. tap the profile you want to use, then tap Connect to connect to the Internet using the selected profile. create a new profile To create a new network connection profile:
1 Tap T Setup in the application launcher screen, then tap Data Network. 2 Tap , then tap New to open the new profile menu. 3 Enter configuration settings as described in the following table. Tap the direct line in a field to enter the setting. Pull down the scroll bar to see additional fields. 4 When youre finished entering information, tap Save to store the profile. options Profile Name GPRS APN Enter the profile name. GPRS access point name (the name of the WAP service provider). options GPRS User Name GPRS Password GPRS Timeout User name for GPRS APN connection. Password for GPRS APN connection. Inactivity interval at which the phone disconnects the GPRS connection. Primary and backup DNS IP servers. GPRS DNS Server 1 and 2 CSD Dial In Number CSD User Name CDS Password Password for CSD connection. CSD Baud Rate Connection speed for CSD Phone number to use to set up a CSD connection. User name for CSD connection. connection. media applications 99 options CSD Line Type CDS Timeout CSD DNS Server 1 and 2 Line type (modem or ISDN) for CSD connection. Inactivity interval at which the phone disconnects the CSD connection. Primary and backup DNS IP servers. use browser profiles To select the active browser profile:
1 Tap / Browser in the application launcher screen to start the browser. 2 Tap , then tap Setup to open the browser setup menu. 3 Tap Profiles, then tap the profile you want to use. 100 media applications 4 Tap Save to save the highlighted profile as the active profile. To create a new browser profile:
1 Tap / Browser in the application launcher screen to start the browser. 2 Tap , then tap Setup to open the browser setup menu. 3 Tap Profiles to open the profiles menu. 4 Tap , then tap New to create the profile. You must set the Profile Name, Primary Gateway IP and Port number, Secondary Gateway IP and Port number, Homepage, and the Network Link (the network connection profile you want to use) for a browser profile. To edit an existing browser profile, select it, tap , tap Setup, then tap Edit to change the settings described above. RealOne media player Your phone has a RealOne media player that you can use to play audio and video files. Tap G Media Player in the application launcher screen to launch the media player. When you see the prompt Refresh My Library Now?, tap Refresh to add any new media files located on the phone or memory card to your library list. play media files 1 Tap All Audio, All Videos, or another media category to see which files of that type are available on your phone. 2 Tap the check box e beside each file you want to play. A check mark d indicates that the file is selected. 3 Tap Play Selected to begin playing the selected file(s). Shortcut: Tap a specific file name to play the file. In the media player window:
00:03:21 00:03:21 File:
File:
0001.amr 0001.amr Playing: 0001.amr Playing: 0001.amr
Tap Z or q to pause or play a file or playlist.
Tap m or l to play the previous or next file. Length:
Length:
00:02:45 00:02:45 Type:
Type:
amr amr Quality: 44 KHz/128kbps Quality: 44 KHz/128kbps Artist:
Artist:
Album:
Album:
Genre:
Genre:
Playlist
Tap and hold m or l to rewind or fast forward through a file. media applications 101 To play a playlist:
1 Tap G Media Player in the application launcher screen to launch the media player. 2 Tap My Playlists to see the playlists stored on your phone. 3 Tap a playlist to select it and see the list of files in the playlist. 4 Tap a file in the playlist to begin playing it. Your phone plays the playlist files in sequence.
Tap n to adjust or mute sound volume. Tap the volume slider to adjust the volume. (Alternatively, you can press the side volume keys to adjust volume.) Tap n on the slider bar to mute and unmute the sound Tip: You also can use the side media player keys (see illustration on page 2) to control playback of media files. create and use playlists To create a new playlist:
1 Select media files as described in the previous section. 2 Tap , then tap Save as Playlist to create a new playlist with the selected files. 3 Enter a name for the playlist, then tap Save to save the new playlist. 102 media applications playlist options Tap to perform various operations on a selected or active playlist. The playlist menu can include the following options:
options Edit Equalizer Shuffle Repeat Delete Use Bluetooth Edit the name or contents of a playlist. Choose an equalizer setting to optimize audio playback. Shuffle the order in which the playlist files are played. Replay the playlist when the last file finishes playing. Delete stored playlists. Deleting a playlist does not delete the media files stored on your phone. camera Your phone has a 2 megapixel camera that can take photos at up to 1200 x 1600 pixels resolution. The camera includes a macro mode for taking close-up photos. media applications 103 Press the camera key (see illustration on page 2) to activate the camera. The active viewfinder image appears in the display. Press S up/down to zoom in/out. Press S left/right to decrease/
increase image brightness. 151 2.0M Number of Additional Photos/
Minutes of Video Storage Space Left Tap to take photo or record video. Brightness 2 Brightness 2 Capture Tap to open camera menu. use the viewfinder Press S or the side up/down keys to zoom in/out. Press S left/right to adjust image brightness. Tip: Tap the viewfinder screen to remove the indicators for an unobstructed fullscreen view. Tap the fullscreen view to return the indicators. The viewfinder indicators are active and can be used to change the most-used functions
(such as image size, camera/video mode, and effects mode). The number next to the photo/video mode indicator represents the number of additional photos, or the minutes and seconds of additional video, that can be stored in the current selected memory storage location. 104 media applications take a photo Press the camera key, tap Capture, or press the center key s to take a photo. Tip: If the camera is in video mode, tap to put the camera in photo mode. The mode indicator in the viewfinder changes to to show that the camera is in photo mode. Camera Mode Switch Up = normal picture mode. Down = macro mode. set normal or macro mode Slide the camera mode switch up to take standard pictures. Slide the camera mode switch down to set macro mode when you want to take close-up photos of small objects or details, or mega pixels 2.0 capture a business card image with the BC Reader application. change photo storage location Photos and video clips can require large amounts of storage space. To avoid using up the limited phone memory space, you can save your photos and video clips to an optional removable SD memory card or MMC memory card. To insert a memory card in your phone, see page 22. 1 Tap , tap Setup, then tap H to open the photo setup menu. 2 Tap the folder tree icon _ in the Save To field. 3 Select the folder on the memory card that you want to use, or tap New to create a new folder on the memory card. media applications 105 4 Tap OK to set the folder as the new storage location. 5 Tap Save to save the new storage location. record a video clip Tap to put the camera in video mode. The mode indicator in the viewfinder changes to to show that the phone is in video mode. Tap Record to start recording a video clip. Tap Done to stop video recording. Note: Your phone can record about five hours of video, with a fully-charged battery and enough available space on the memory card. view and delete photos or video clips To view a photo or video clip:
1 Tap , then tap Album to open the folder where your photos or video clips are stored. 2 Tap a photo thumbnail image to see the photo. Tap on a video clip thumbnail image to play the video clip. To delete photos or video clips:
1 Tap , then tap Album to open the folder where your photos or video clips are stored. 2 Tap , then tap Delete. 106 media applications 3 Tap the check box e beside each photo or video clip you want to delete, or tap the check box beside All to select all items. A check mark d indicates that the item is selected. setup options Tap , tap Setup, then tap H to open the photo setup menu. You can set or adjust the following options:
4 Tap OK to delete the selected photo(s) or video clip(s). Tip: To quickly delete a single photo or video clip, tap and hold the thumbnail image to open a pop-up menu, then select Delete. effects You can adjust the size of your photo or video by tapping the appropriate icon in the viewfinder. Tap other icons to set lighting conditions or select a photo style (such as Black/White or Sepia tones). options Photo Size Photo Quality Default Name Shutter Sound Save To Set photo size. Set photo quality. Apply a date and time stamp, or specify a text prefix for the photos and videos you take. Set the shutter sound. Specify the location (phone memory or memory card) where your photos/video clips are saved. media applications 107 delay timer Tap , then tap Delay Timer to activate the delay timer. The timer indicator appears in the upper-right corner of the viewfinder. Tap Start to activate the timer. The timer counts down from 10 seconds, and then takes a photo. You can tap Stop to stop the timer at any time during the countdown. Tip: To take a self-portrait, activate the timer, and use the mirror to aim the camera lens. voice recorder You can record personal messages and phone calls on your phone. Note: Recording of phone calls is subject to varying State and Federal laws regarding privacy and recording of phone conversations. 108 media applications Always obey the laws and regulations on the use of this feature. make a recording Tap % Recorder in the application launcher screen to activate the voice recorder. 1 Tap k to start recording. 2 Speak into the phone. 3 Tap p to stop recording. The voice record is automatically saved to the MyAudio folder on your phone. 4 To play back the voice record you just made, tap q. To stop playback, tap p. play a recording 1 Tap % Recorder in the application launcher screen to activate the voice recorder. 2 Tap , then tap Open to open the MyAudio folder. 3 Tap the voice record you want to play, then tap Open to play it. Tip: The voice record name identifies the date and time when the file was recorded. The recording date and time also appears when you play the voice record. change voice record storage location 1 Tap , tap Setup, then tap the folder tree icon _ in the Location field. 2 Select a folder, then tap OK to set it as the new storage location. 3 Tap Save to save the new storage location. video camera To activate the camera in video mode, tap K Video Camera in the application launcher screen. For instructions on how to use the camera in video mode, see page 103. Note: Your phone can record about five hours of video, with a fully-charged battery and enough available space on the memory card. media applications 109 untitled.jpg photo editor Use the photo editor to edit photos and images stored on your phone, or create new drawings or illustrations. Tap 3 Photo Editor in the application launcher screen to open the photo editor. To edit an existing photo or picture, tap , tap Open, then select the picture you want to open. Tap a button in the toolbar at the bottom of the screen to perform the following operations on the picture:
Save 1.0K Fit
Tap I to see a full-screen picture view. Tap the full-screen view to return to the photo editor screen. 110 media applications
Tap H to activate the camera, take a photo, and open it in the photo editor.
Tap J to crop a portion of the photo. Tap and drag the bounding box to outline the crop borders. Tap and drag a bounding box edge or corner to resize the bounding box.
Tap k to use the drawing tools on the picture as described below. To draw a new picture, or use the drawing tools on an existing photo or picture, tap the drawing button k in the toolbar at the bottom of the screen, then:
Tap a drawing tool in the bottom left corner of the screen.
Tap the box to the right of the drawing tool to adjust tool settings.
Tap the color picker to the right of the tool settings box to set a drawing color.
Tap the scaling drop-down menu to zoom in/out on the picture, or tap Fit to fit the picture to the page. To save a picture:
1 Tap Save. 2 Enter a name, storage location, and picture type. 3 Tap Save to save the picture. Tap to perform the following operations:
options Undo or Redo Undo or redo the last editing New Open or drawing operation. Open a blank canvas to create a new picture. Open an existing photo or picture. options Save As Share Overlay Rotate Adjust More Specify a name for a picture you save. Send the picture over a Bluetooth wireless connection, or in an MMS or email message. Apply a border, image, text, or timestamp to the picture. Rotate or flip a picture. Adjust picture size, brightness, contrast, sharpness, or color. Apply filters, change picture style, or print the picture. media applications 111 FM radio You can use your phone to listen to FM radio stations when an optional Motorola Original standard headset or stereo headset is plugged into the phones headset jack. Note: You cant listen to the FM radio over a Bluetooth wireless headset. Tap 1 FM Radio in the application launcher screen to turn on the radio. STEREO STEREO Loaded Loaded 88.7 MHz tune a station Tap T or S to step down or up to the next frequency setting. Tap R or Q to search and set the previous or next active FM station. Hide Hide 112 media applications use preset channels Tap U to assign a channel number to the current tuned station. Tap X or W to select the previous or next channel. Alternatively, you can press the h or j media player keys (see illustration on page 2) to select the previous or next channel. radio controls Tap the volume slider to adjust the radio volume. Alternatively, you can press the side up/down keys to adjust radio volume. Tap V to mute the radio. Alternatively, you can press the i media player key (see illustration on page 2) to mute/unmute the radio. Tap Hide to hide the radio when you want to use the display for other applications. The radio continues to play. Tap to edit radio channels, play the radio through your phones internal speaker, or set the radio to play mono or stereo sound. Tip: You also can use the side media player keys (see illustration on page 2) to control some radio functions. send/receive calls with the radio on Your phone rings or vibrates as usual to notify you of an incoming call, message, or other event. You can answer the call, or ignore the call and continue listening to the radio. If you answer the call, tap End as usual to end the call and resume the FM broadcast. You dont have to turn off the radio to make a call. The radio is muted automatically when you dial an outgoing call from the phone keypad. media applications 113 extra applications talking phone You can set your phone to recite the names of menu features as you select them, read entries in your contacts list, recite phone numbers as you enter them, and/or read messages you receive. 1 Tap T Setup in the application launcher screen, then tap Talking Phone. 2 Tap the check box e beside a talking phone feature (Menu readout, Contact List readout, Digits readout, or Message readout) to select it. A check mark d indicates that the feature is activated. 3 Tap Save to save your setting. 114 extra applications Bluetooth wireless Your phone supports Bluetooth wireless connections. You can connect your phone with a Bluetooth headset or car kit to make handsfree calls. You can connect your phone with a phone or computer that supports Bluetooth connections to exchange files. Tip: Your phones antenna must be on to use Bluetooth features. Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you cant concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. For maximum Bluetooth security, you should always pair Bluetooth devices in a safe, private environment. turn Bluetooth power on or off Shortcut: Tap the status bar at the top of the display, then tap the Bluetooth drop-down menu to turn Bluetooth power On or Off. To activate or deactivate Bluetooth power from the application launcher:
1 Tap 0 Bluetooth in the application launcher screen, then tap . 2 Tap Turn On or Turn Off to activate or deactivate Bluetooth power. Note: To extend battery life, set Bluetooth power to Off when not in use. Your phone will not connect to another device until you set Bluetooth power back to On and connect your phone to the device again. use a headset or handsfree car kit Before you try to connect your phone to a handsfree device, make sure the device is on and ready in pairing or bonding mode (see the users guide for the device). You can pair your phone with only one device at a time. 1 Tap 0 Bluetooth in the application launcher screen to see the device list. 2 If necessary, turn Bluetooth power on. 3 Tap Search to search for Bluetooth devices. Your phone lists the devices it finds within range. To connect to a device, select it from the list and tap Bond. Your phone automatically uses 0000 as the passkey to bond with the device. If 115 extra applications 1 Tap and hold the object to open a pop-up menu, then select Share to see a list of share options. 2 Tap Bluetooth to see the device list. 3 Tap the device name on the list, or tap Search to locate the device. 4 Tap Send to send the object. If necessary, enter the correct PIN code to create a secure connection with the device. Note: Once you connect your phone to a Bluetooth device, that device can start a similar Bluetooth connection with your phone. Your display shows when a Bluetooth connection is active. 0000 doesnt work, your phone prompts you to enter the devices passkey. Shortcut: When Bluetooth power is on, your phone can automatically connect to a handsfree device you have used before. Just turn on the device and move it near the phone. copy files to another device You can copy a photo, picture, video clip, sound file, contact, calendar event, or bookmark to another phone or computer that supports Bluetooth connections. Note: You cant copy some copyrighted objects. Before you try to copy a file to another device, make sure the receiving device is on and ready in discoverable mode. 116 extra applications receive files from another device Before you try to receive a file from another device, make sure your phones Bluetooth power is on (see page 115). 1 Send the file from the device. If your phone and the sending device dont recognize each other, place your phone in discoverable mode so the sending device can locate it. Tap 0 Bluetooth in the application launcher screen, tap , then tap Discoverable. 2 The device may request permission to bond with your phone. If necessary, enter the correct PIN code to create a secure connection with the device. send a photo to a printer You can send a photo to a printer that supports Bluetooth connections. Note: You can print A4 or US Letter size pages. To print another size, copy the object to a linked computer and print it from there. 1 On your phone, take a new photo or scroll to a stored photo that you want to print, tap , then tap Print. 2 If available, choose additional objects or print options. 3 Select a recognized printer name, or tap Search to search for an unrecognized printer where you want to send the object. extra applications 117 advanced Bluetooth features Note: A device is recognized after you connect to it once (see page 115). features pair with recognized device Tap 0 Bluetooth in the application launcher screen to see device list, tap and hold the device name to open a pop-up menu from which you can choose to Create Bond, Connect, Delete, or Lock/Unlock the device. drop pairing with device Tap 0 Bluetooth in the application launcher screen to see device list, tap and hold the device name to open a pop-up menu, select Disconnect the drop the connection. 118 extra applications synchronize phone information You can synchronize data between your phone and a PC through a Bluetooth wireless connection or USB cable connection using Motorola mobile PhoneTools software To transfer and synchronize data between your phone and PC, you must use the Motorola mobile PhoneTools software included with the Motorola Original data kit. See the mobile PhoneTools users guide for more information. Motorola mobile PhoneTools software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. You can connect your phone and PC using a Bluetooth wireless connection (see page 114), or a Motorola Original USB cable connected to your phone and PC. Once the phone is connected to the PC, select the Sync option from the Motorola mobile PhoneTools software running on the PC. modem You can use your phone as a modem, to connect your PC to the Internet or transfer data to/from the PC. To use the phone as a modem, you must connect it to the PC using a Bluetooth wireless connection or USB cable connection. Tip: To connect your phone to the PC through a Bluetooth connection, make sure that your PC supports Bluetooth and has the correct drivers installed. Motorola mobile PhoneTools software includes a PC modem application that makes it easy to use your phone as a modem, and to set up a USB cable connection without first having to activate your phones modem application. When you connect your phone and PC over a USB cable connection, make sure that the phone is set to the correct USB mode setting. Tap T Setup in the application launcher screen, tap USB Mode, select Modem, then tap Save. Tap , Modem in the application launcher screen to see the modem status screen. When your phone shows Status: Ready, its ready to be used as a standard PC modem. extra applications 119 send data call 1 Open the application (such as dial-up-networking) on your PC, and place the call through the application. You cannot dial data numbers on your phones keypad. You must dial them through the PC. 2 When data transfer is complete, end the call from the connected PC to close the connection. receive data call 1 Your phone notifies you when the data call arrives, and transfers the call to the connected PC. Use the application running on the PC to answer the call. 2 When the data transfer is complete, end the call from the connected PC to close the connection. 120 extra applications stk Your SIM card may contain additional SIM Toolkit (STK) applications that add features and functionality to your phone. Tap 8 STK on the application launcher screen to see a list of STK applications you can use. Tap a service or feature to select it. Your phone shows the service or feature screen. Pull down the scroll bar to scroll through a text page or option list. Tap an option to select it. Tap at any time to return to the previous screen. Some screens may contain text fields where you must provide information in order to use a service or feature. Tap the field and enter text in the usual way. For more information about the STK applications available on your SIM card, contact your service provider. Local City: Beijing world time Your phone can show the current time and date for multiple cities around the world. Tap 9 World Time in the application launcher screen to see the world time screen. You can reset the time and date for a listed city. Tap the time and/or date field to change it. Tap OK to save your changes. 12:40 PM 10/16/2008 Thu 06:40 London 04:40 Thu City 2:
Thu Athens City 1:
OK Athens City:
Time Zone: GMT +02:00 To replace a city listing in the world time screen, tap the city name, then tap Browse... to see the time zone map (shown at right). Tap the city name again to see a city list. Select a new city, then tap OK to store it. Alternatively, tap a time zone in the time zone map to see a list of cities in that time zone. Select a new city, then tap OK to store it. OK
+1 +2 +
-11 -10 -9 T M G
-8
-7
-6
-5
-4
-3
-2
-1 extra applicationsworld time 121 other features advanced calling features conference call During a call:
Tap keypad button , tap keypad keys to dial next number, tap Call, when call connects tap Link to connect the two calls. Repeat to add additional parties to the call. transfer a call During a call:
Tap , tap Transfer, tap keypad keys to dial the number to which you want to transfer the call, tap Call to transfer. 122 other featuresadvanced calling features call forwarding Set up or cancel call forwarding:
Tap 9, tap , tap Setup, tap Call Divert. Tap (Voice Calls, Data Calls, or Fax Calls to select the type of calls you want to forward. Tap Cancel All Diverts to cancel all call forwarding. call barring Restrict outgoing or incoming calls:
Tap 6, tap T Setup, tap Security tap Call Barring. features fixed dial When you turn on fixed dialing, you can call only numbers stored in the fixed dial list. Tap 6, tap T Setup, tap Security, tap Fixed Dialing, then select On or Off. You edit fixed dial entries just like an address book contact. You can enter a wildcard character ^ in one or more positions for a fixed dial phone number. The wildcard character can be replaced by any digit when the user dials the number. setup features language Set menu language:
Tap 6, tap T Setup, tap Language. Tip: Select Automatic to let your phone set the language based on your location. text size Set the size of the display text:
Tap 6, tap T Setup, tap Text Size. other featuressetup 123 features USB mode Set the mode in which you want to use your phones USB port:
Tap 6, tap T Setup, tap USB Mode, then select Modem, Mass Storage, or Web Camera. In Web Camera mode, you can use your phone as a PC camera when you connect the phone to a PC through a USB cable connection. Use the CD-ROM included with your phone to install the Web camera device driver on the PC. Note: Motorola mobile PhoneTools software can automatically change your phones USB mode setting as needed. 124 other featuressetup features touchscreen calibration Calibrate the touchscreen if the phone begins to respond incorrectly to your stylus input on the touchscreen display:
Tap 6, tap T Setup, tap Screen Calibration. power management Your phone includes several features designed to help extend battery life. Tip: To conserve power, leave Bluetooth power turned off when not in use. Tap 6, tap T Setup, then tap Power Management. Select Battery Save to automatically adjust phone settings to maximize battery life. Select Auto Power Off to have your phone automatically turn itself off after a specified period of inactivity. features master reset Reset all default phone settings except for the lifetime timer:
Tap 6, tap T Setup, tap Master Reset. Tip: Tap Cancel to exit without performing the master reset procedure. features master clear Caution: Master clear erases all information you have entered (including address book and calendar entries) and content you have downloaded (including photos and sounds) stored in your phones memory. After you erase the information, you cant recover it. Clear all settings and entries you made except SIM card information, erase downloaded pictures and sound files, and reset all options except for the lifetime timer:
Tap 6, tap T Setup, tap Master Clear. Tip: Tap Cancel to exit without performing the master clear procedure. other featuressetup 125 call times & costs Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing O or tapping End. This time includes busy signals and ringing. The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider. For billing information, contact your service provider. features call times See call timers and cost trackers:
Tap 9, tap , tap Setup, tap Call Meters. To reset the call timer, tap Clear Call Time. To reset the cost tracker, tap Clear Call Cost. in-call timer Show time or cost information during a call:
Tap 9, tap , tap Setup, tap Call Meters, tap the Display pop-up menu, then select Timer, Cost, Total Cost, Credit, or Off. 126 other featurescall times & costs features audible in-call timer Set an audible timer to beep at specified intervals during a call:
Tap 9, tap , tap Setup, tap Call Meters, tap the Audible Timer pop-up menu, then select Off, 1 Min, 5 Min, 10 Min, or 15 Min. call cost setup Set a credit limit:
Tap 9, tap , tap Setup, tap Call Meters, tap Call Cost Setup, enter your SIM PIN2 code when prompted. You can enter a credit limit, and set the phone to show your remaining credit in time units or as a currency value. features credit available (advice of charge option) See the amount of credit available:
Tap 9, tap , tap Setup, tap Call Meters, tap Available Credit. handsfree Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you cant concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the other featureshandsfree 127 laws and regulations on the use of these products. security features adjust Bluetooth accessory volume If your Bluetooth headset or car kit accessory supports remote volume control, you can use your phones side up/down keys to set the devices speaker volume during a handsfree call. auto answer Automatically answer calls when using the handsfree speaker, or when the phone is connected to a car kit, headset, or external speakerphone:
Tap 9 to open the phone keypad, tap , tap Setup, then select Auto Answer. 128 other featuressecurity features lock/unlock SIM card Your Personal Identification Number (PIN) code protects the information stored on your SIM card. When the SIM card is locked, you must enter your SIM card PIN code to unlock the SIM card each time you turn on the phone or insert the SIM card in the phone. Your SIM card PIN code is given to you by your service provider. Caution: If you enter an incorrect PIN code three times in a row, your SIM card is disabled and your display shows SIM Blocked. Tap 6 to open application launcher, tap T Setup, tap Security, then select PIN Request On or PIN Request Off. features unblock SIM card PIN codes If you enter an incorrect SIM card PIN code or PIN2 code three times in a row, your SIM card is disabled and your phone shows SIM PIN Blocked. You must enter a PIN unblocking key (PUK) code, which you can obtain from your service provider. Caution: If the unblocking attempt is tried unsuccessfully 10 times, the SIM card is permanently disabled and your phone shows SIM Disabled. other features 129 service and repairs If you have questions or need assistance, we're here to help. Go to www.motorola.com/consumer/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-331-6456 (United States), 1-888-390-6456 (TTY/TDD United States for hearing impaired), or 1-800-461-4575
(Canada). 130 Recycling Information Specific Absorption Rate Data SAR DataThis model meets international guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The ICNIRP SAR limit for mobiles devices used by the general public is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.55 W/kg.1 As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this user guide.2 In this case, the highest tested SAR value is 0.89 W/kg.1 As SAR is measured utilizing the devices highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head and body. Additional Information can be found on the websites of the World Health Organization (http://www.who.int/emf) or Motorola, Inc.
(http://www.motorola.com/rfhealth). 1. The tests are carried out in accordance with international guidelines for testing. The limit incorporates a substantial margin for safety to give additional protection for the public and to account for any variations in measurements. Additional related information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. Please see the Safety and General Information section about body worn operation. 2. SAR Data 131 Information from the World Health Organization WHO Information Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your childrens RF exposure by limiting the length of calls or by using handsfree devices to keep mobile phones away from your head and body. Source: WHO Fact Sheet 193 Further information: http://www.who.int./peh-emf 132 WHO Information GNU General Public License GNU License For instructions on how to obtain a copy of any source code being made publicly available by Motorola related to software used in this Motorola mobile device, which may be subject to GNUs General Public License, please send an email to ezxgpl@motorola.com. service and repairs 133 index A accessories 16, 114, 127 address book 48 airplane mode 23 alarm clock 88 alert set 39 turn off 34 answer a call 24 antenna, turning on/off 23 application launcher 28 appointments. See calendar 134 index B battery 19, 20 battery charge indicator light battery indicator 30 battery life, extend 21, 115, 20 124 Bluetooth indicator 30 Bluetooth wireless 114 bonding. See Bluetooth wireless brightness, set 41 browser 96 browser key 1, 96 browser messages 72 business card reader 93 button bar 29 C calculator 87 calendar 81 call answer 24 cancel 45 end 24 make 24 call barring 35, 122 call forwarding 122 call timers 126, 127 call waiting 44 caller ID 44 camera 3, 103 camera key 1, 2, 3 camera mode switch 3 car kit 127 center key 1, 34 clock 30 codes 35, 36 color scheme 40 conference call 122 costs, track 127 credit information 127 customer support 130 D data, sharing 37 dial a phone number 24, 123 dialed calls 42 direct dial 47 display 26, 40, 41 E earpiece 1 earpiece volume 34 email 74 email address 49 emergency number 45 end a call 24 end key 1 English keyboard 32 Enter Unlock Code message equalizer 103 extension number, dialing 35 47 F file manager 89 fixed dial 123 FM radio 112 FM radio key 1, 112 forward calls 122 function buttons 33 G global navigation bar 27 GPRS indicator 30 H handsfree speakerphone 35 handwriting 33 headset 127 headset jack 1 help 26 hold a call 44 home screen 26 I Incoming Call message 44 incoming call, cancel 45 information service messages 72 information, sharing 37 input settings 33 international access code 46 index 135 L language 123 linking. See Bluetooth wireless lock phone 36 phone keys 36 SIM card 128 touchscreen 36 Low Battery message 30 M make a call 24 master clear 125 master reset 125 media player 101 media player indicator 30 media player keys 2 memory card 22 memory card indicator 30 memory card slot 1, 2 136 index Memory is Full! message 65 message outbox 64 reading 64 sending 60, 61 signature 59 status 64 micro-browser 72 mini-USB port 1, 2 modem 119 multimedia message 61 mute a call 44 N navigation key 1, 34 notes 86 numeric pad 33 O objects, sharing 37 optional accessory 16 optional feature 16 organizing files 89 outbox 64 P pairing. See Bluetooth wireless password 35 phone lock switch 1, 2 phone number storing 49 your number 25 photo 103 photo editor 110 picture ID 44 PIN code 23, 35, 128, 129 PIN2 code 35 Pinyin keyboard 32 power key 1, 23 power management 124 printing 117 profiles 39 Q quick card 62, 65 R radio 112 RealOne indicator 30 RealOne media player 101 received calls 42 recent calls 42 recorder 108, 109 redial 43 repairs 130 ring alert profiles 39 ringer ID 44 ringer volume 40 ringtone 39, 49, 54 S safety information 8 security code 35 send key 1, 24 setup 123 side up/down keys 1, 2, 34 signal strength indicator 30 silent profile 39 SIM Blocked message 23, SIM card 16, 23, 35, 120, 128 128, 129 SIM Disabled message 129 SIM PIN code 128, 129 SIM toolkit 120 speakerphone 35, 127 status bar 29 STK 120 store phone numbers 49 store your phone number 25 stylus 3, 27 support 130 synchronize information 118 T talking phone 114 tap & hold 33 tasks 85 technical support 130 text entry 31 text messaging 60 text size 123 time 121 timers 126, 127 touchscreen calibrate 124 input settings 33 transfer a call 122 TTY indicator 30 turbo dial 46 turn on/off 23 index 137 W wallpaper 40 Web pages 96 world health organization 132 world time 121 Y your phone number 25 Z Zhuyin keyboard 32 U.S. patent Re. 34,976 U unblock the SIM card 129 unlock phone 23, 35, 36 phone keys 36 SIM card 128 touchscreen 36 unlock code 35, 36 USB mode, set 124 V vibrate profile 39 video clip 103 viewer 87 voice records 108, 109 voicemail 25, 47 volume 34 138 index Cover.Print.Front.V3i.UG.fm Page 2 Monday, August 29, 2005 10:58 AM Cover.Print.Front.V3i.UG.fm Page 2 Monday, August 29, 2005 10:58 AM
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-03-30 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2007-03-30
|
||||
1 2 3 | Applicant's complete, legal business name |
Motorola Mobility LLC
|
||||
1 2 3 | FCC Registration Number (FRN) |
0004321311
|
||||
1 2 3 | Physical Address |
Motorola Mobility LLC
|
||||
1 2 3 |
Chicago, Illinois 60654
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
IHD
|
||||
1 2 3 | Equipment Product Code |
T6HM1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J**** N******
|
||||
1 2 3 | Title |
Director Product Compliance
|
||||
1 2 3 | Telephone Number |
847-6********
|
||||
1 2 3 | Fax Number |
847-6********
|
||||
1 2 3 |
n******@motorola.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 | Name |
R****** O******
|
||||
1 2 3 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 |
Columbia, Maryland 21045
|
|||||
1 2 3 |
United States
|
|||||
1 2 3 | Telephone Number |
410-2********
|
||||
1 2 3 | Fax Number |
410-2********
|
||||
1 2 3 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/14/2007 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable PCS GSM/ EDGE Transceiver with Bluetooth | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 3 | Grant Comments | Power output listed is EIRP. SAR compliance for body-worn operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. SAR compliance was evaluated with the integral Bluetooth active. The highest reported SAR values are: Head: 0.55 W/kg; Body-worn: 0.37 W/kg. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | ||||
1 2 3 | Output power is conducted. This device is approved for use in the handset described in this filing. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Motorola Inc.
|
||||
1 2 3 | Name |
A**** P********
|
||||
1 2 3 | Telephone Number |
847-5********
|
||||
1 2 3 | Fax Number |
847-5********
|
||||
1 2 3 |
a******@motorola.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | 1850.2 | 1908.9 | 1.189 | 0.1 ppm | 243KGXW | ||||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1850.2 | 1909.8 | 0.608 | 0.1 ppm | 241KG7W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0013000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC